When the concurrent back end is not enabled, it is possible to have a
scenario where: we compile a specific inlinable non-pointer-receiver
method T.M, then at some point later on in the compilation we visit a
type that triggers generation of a pointer-receiver wrapper (*T).M,
which then results in an inline of T.M into (*T).M. This introduces
subtle differences in the DWARF as compared with when the concurrent
back end is enabled (in the concurrent case, by the time we run the
SSA back end on T.M is is marked as being inlined, whereas in the
non-current case it is not marked inlined).
As a fix, at the point where we would normally compile a given
function in the xtop list right away, if the function is a method AND
is inlinable AND hasn't been inlined, then delay its compilation until
compileFunctions (so as to make sure that when we do compile it, all
possible inlining has been complete). In addition, make sure that
the abstract function symbol for the inlined function gets recorded
correctly.
Fixes#38068.
Change-Id: I57410ab5658bd4ee5b4b80750518e9b20fd6ba52
Reviewed-on: https://go-review.googlesource.com/c/go/+/234178
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
modfetch.TryProxies ranks errors returned by GOPROXY entries by
usefulness. It returns the error of the highest rank from the last
proxy. Errors from "direct" and "noproxy" are most useful, followed by
errors other than ErrNotExist, followed by ErrNotExist.
This change ranks errUseProxy with ErrNotExist even though it's
reported by "noproxy". There is almost always a more useful message
than "path does not match GOPRIVATE/GONOPROXY".
Fixes#39180
Change-Id: Ifa5b96462d7bf411e6d2d951888465c839d42471
Reviewed-on: https://go-review.googlesource.com/c/go/+/234687
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When copying a stack, we
1. allocate a new stack,
2. adjust pointers pointing to the old stack to pointing to the
new stack.
If the GC is running on another thread concurrently, on a machine
with weak memory model, the GC could observe the adjusted pointer
(e.g. through gp._defer which could be a special heap-to-stack
pointer), but not observe the publish of the new stack span. In
this case, the GC will see the adjusted pointer pointing to an
unallocated span, and throw. Fixing this by adding a publication
barrier between the allocation of the span and adjusting pointers.
One testcase for this is TestDeferHeapAndStack in long mode. It
fails reliably on linux-mips64le-mengzhuo builder without the fix,
and passes reliably after the fix.
Fixes#35541.
Change-Id: I82b09b824fdf14be7336a9ee853f56dec1b13b90
Reviewed-on: https://go-review.googlesource.com/c/go/+/234478
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
On Windows, calling syscall.Open(file, O_CREAT|O_TRUNC, 0) for a file
that already exists would change the file to be read-only.
That is not how the Unix syscall.Open behaves, so avoid it on
Windows by calling CreateFile twice if necessary.
Fixes#38225
Change-Id: I70097fca8863df427cc8a97b9376a9ffc69c6318
Reviewed-on: https://go-review.googlesource.com/c/go/+/234534
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
On Windows, some of gcc command (like msys2 native) output NUL as a file.
Fixes#36000
Change-Id: I02c632fa2d710a011d79f24d5beee4bc57ad994e
Reviewed-on: https://go-review.googlesource.com/c/go/+/233977
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This removes the GOAMD64 environment variable and its documentation.
The value is instead supplied by a compiled-in constant.
Note that function alignment is also dependent on the value of
the (removed) flag; it is 32 for aligned jumps, 16 if not.
When the flag-dependent logic is removed, it will be 32.
Updates #35881.
Change-Id: Ic41c0b9833d2e8a31fa3ce8067d92aa2f165bf72
Reviewed-on: https://go-review.googlesource.com/c/go/+/231600
Reviewed-by: Austin Clements <austin@google.com>
Found while looking at common code between architectures.
Recreation of CL 234680 which was accidentally on master.
Change-Id: Ib8fac3168916e8e64b2bc65fd3830c5856d77c5e
Reviewed-on: https://go-review.googlesource.com/c/go/+/234682
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This will hopefully address the occasional "runtime: out of memory"
failures observed on the openbsd-arm-jsing builder:
https://build.golang.org/log/c296d866e5d99ba401b18c1a2ff3e4d480e5238c
Also make the "spin" and "winch" loops concurrent instead of
sequential to cut down the test's running time.
Finally, change Block to coordinate by closing stdin instead of
sending SIGINT. The SIGINT handler wasn't necessarily registered by
the time the signal was sent.
Updates #20400
Updates #39043
Change-Id: Ie12fc75b87e33847dc25a12edb4126db27492da6
Reviewed-on: https://go-review.googlesource.com/c/go/+/234538
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently in (*addrRanges).removeGreaterEqual we use
(addrRange).subtract with a range from specified address to "infinity"
which is supposed to be maxOffAddr. However, maxOffAddr is necessarily
an inclusive bound on the address space, because on many platforms an
exclusive bound would overflow back to 0.
On some platforms like mips and mipsle, the address space is smaller
than what's representable in a pointer, so if there's a range which hits
the top of the address space (such as in the pageAlloc tests), the limit
doesn't overflow, but maxOffAddr is inclusive, so any attempt to prune
this range with (*addrRange).removeGreaterEqual causes a failure, since
the range passed to subtract is contained within the address range which
touches the top of the address space.
Another problem with using subtract here is that addr and
maxOffAddr.addr() may not be in the same segment which could cause
makeAddrRange to panic. While this unlikely to happen, on some platforms
such as Solaris it is possible.
Fix these issues by not using subtract at all. Create a specific
implementation of (addrRange).removeGreaterEqual which side-steps all of
this by not having to worry about the top of the address space at all.
Fixes#39128.
Change-Id: Icd5b587b1a3d32a5681fb76cec4c001401f5756f
Reviewed-on: https://go-review.googlesource.com/c/go/+/234457
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
In CL 231958, TempDir was changed to create a new temp directory on
each allocation, on the theory that it is easy to save in a variable
for callers that want the same directory repeatedly. Apply that
transformation here.
Updates #38850
Change-Id: Ibb014095426c33038e0a2c95303579cf95d5c3ba
Reviewed-on: https://go-review.googlesource.com/c/go/+/234582
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We use a single parent directory for all temporary directories
created by a test so they're all kept together.
Fixes#38850
Change-Id: If8edae10c5136efcbcf6fd632487d198b9e3a868
Reviewed-on: https://go-review.googlesource.com/c/go/+/231958
Reviewed-by: Russ Cox <rsc@golang.org>
Fold the descriptions of testing.T.Deadline and TestMain related changes
into the existing section for package testing.
Also link T.Deadline to its godoc.
Change-Id: I732c45fb879305099cb8a51a77ef11fba1b2f1e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/234557
Reviewed-by: Bryan C. Mills <bcmills@google.com>
We do it on the symtab pass. Remove duplicate.
Change-Id: I88cc8cd6e873749e0f6197f809aa812bca9dbbf9
Reviewed-on: https://go-review.googlesource.com/c/go/+/234493
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Now we have ctxt.IsAsm, use that, instead of passing in a
parameter.
Change-Id: I81dedbe6459424fa9a4c2bfbd9abd83d83f3a107
Reviewed-on: https://go-review.googlesource.com/c/go/+/234492
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
If the package path is known, pass it to the object file writer
so the symbol names are pre-expanded. (We already expand the
package path in debug info.)
Change-Id: I2b2b71edbb98924cbf3c4f9142b7e109e5b7501a
Reviewed-on: https://go-review.googlesource.com/c/go/+/234491
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Most Go objects are compiled with known package path, so the
symbol name is already fully expanded. Nevertheless, currently
in the linker strings.Replace is called unconditionally, and most
of the time it doesn't do anything.
This CL records a per-object flag in the object file, and do the
name expansion only when the name is not expanded at compile time.
This gives small speedups for the linker. Linking cmd/compile:
name old time/op new time/op delta
Loadlib 35.1ms ± 2% 32.8ms ± 4% -6.43% (p=0.008 n=5+5)
Symtab 15.8ms ± 2% 14.0ms ± 8% -11.45% (p=0.008 n=5+5)
TotalTime 399ms ± 1% 385ms ± 2% -3.63% (p=0.008 n=5+5)
Change-Id: I735084971a051cd9be4284ad294c284cd5b545f4
Reviewed-on: https://go-review.googlesource.com/c/go/+/234490
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This was causing issues when fuzzing with
TestMarshalUnmarshal since the test would
occassionally set the version to VersionTLS13,
which would fail when unmarshaling. The check
doesn't add much in practice, and there is no
harm in removing it to de-flake the test.
Fixes#38902
Change-Id: I0906c570e9ed69c85fdd2c15f1b52f9e372c62e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/234486
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
v0.3.0 is a tag on 859b3ef565e2, the version that was already being
used. This change is a no-op, except for letting us use a release
version instead of a pseudo-version.
For #36905
Change-Id: I70b8ce2a3f1451f5602c469501362d7a6a673b12
Reviewed-on: https://go-review.googlesource.com/c/go/+/234002
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
The Plan 9 runtime startup was enabling notes (like Unix signals)
before the gsignal stack was allocated. This left a small window
of time where an interrupt (eg by the parent killing a subprocess
quickly after exec) would cause a null pointer dereference in
sigtramp. This would leave the interrupted process suspended in
'broken' state instead of exiting. We've observed this on the
builders, where it can make a test time out waiting for the broken
process to terminate.
Updates #38772
Change-Id: I54584069fd3109595f06c78724c1f6419e028aab
Reviewed-on: https://go-review.googlesource.com/c/go/+/234397
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
The runtime needs to find the PC of the deferreturn call in a few
places. So for functions that have defer, we record the PC of
deferreturn call in its funcdata.
For very large binaries, the deferreturn call could be made
through a trampoline. The current code of finding deferreturn PC
fails in this case. This CL handles the trampoline as well.
Fixes#39049.
Change-Id: I929be54d6ae436f5294013793217dc2a35f080d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/234105
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This deletes all sym.Symbol and sym.Reloc references. This is
certainly not complete, and there are more cleanups to do. But I
feel this makes a good first round.
Change-Id: I7621d016957f7ef114be5f0606fcb3ad6aee71c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/234097
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Found this while deleting the old code. This should be data2.
Change-Id: I1232fac22ef63bb3a3f25a0558537cc371af3bd9
Reviewed-on: https://go-review.googlesource.com/c/go/+/234098
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
This part of the test has been flaky despite repeated attempts to fix it,
and it is unclear what exactly it is testing. Remove it.
Fixes#24616.
Change-Id: If7234f99dd3d3e92f15ccb94ee13e75c6da12537
Reviewed-on: https://go-review.googlesource.com/c/go/+/233942
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Currently, for the special field tracking symbol go.track.XXX,
when they are reachable, we set its type to SCONST. There is no
need to do that. Just leave it unset (as Sxxx). The symbol is
done after this point.
Change-Id: I966d80775008f7fb5d30fbc6b9e4a30ae8316b6c
Reviewed-on: https://go-review.googlesource.com/c/go/+/233998
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Don't include SCONST symbols in the symbol table when
NotInSymbolTable is set. This is what the old code (genasmsym)
does.
In fact, SCONST symbol is only emitted by the field tracking
code, and is always NotInSymbolTable. So we should just not
include them at all, or not generate SCONST symbols at all. But
at this late stage I'll just restore the old behavior.
Change-Id: If6843003e16701d45b8c67b2297098a7babdec52
Reviewed-on: https://go-review.googlesource.com/c/go/+/233997
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently maxOffAddr is defined in terms of the whole 64-bit address
space, assuming that it's all supported, by using ^uintptr(0) as the
maximal address in the offset space. In reality, the maximal address in
the offset space is (1<<heapAddrBits)-1 because we don't have more than
that actually available to us on a given platform.
On most platforms this is fine, because arenaBaseOffset is just
connecting two segments of address space, but on AIX we use it as an
actual offset for the starting address of the available address space,
which is limited. This means using ^uintptr(0) as the maximal address in
the offset address space causes wrap-around, especially when we just
want to represent a range approximately like [addr, infinity), which
today we do by using maxOffAddr.
To fix this, we define maxOffAddr more appropriately, in terms of
(1<<heapAddrBits)-1.
This change also redefines arenaBaseOffset to not be the negation of the
virtual address corresponding to address zero in the virtual address
space, but instead directly as the virtual address corresponding to
zero. This matches the existing documentation more closely and makes the
logic around arenaBaseOffset decidedly simpler, especially when trying
to reason about its use on AIX.
Fixes#38966.
Change-Id: I1336e5036a39de846f64cc2d253e8536dee57611
Reviewed-on: https://go-review.googlesource.com/c/go/+/233497
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
CL 233857 fixed the underlying issue for #37246,
which had arisen again as #38916.
Add the test case from #37246 to ensure it stays fixed.
Fixes#37246
Change-Id: If7fd75a096d2ce4364dc15509253c3882838161d
Reviewed-on: https://go-review.googlesource.com/c/go/+/233941
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
When tuple generators and selectors are eliminated as part of the
CSE pass we may end up with tuple selectors that are in different
blocks to the tuple generators that they correspond to. This breaks
the invariant that tuple generators and their corresponding
selectors must be in the same block. Therefore after CSE this
situation must be corrected.
Unfortunately the fixup code did not take into account that selectors
could be eliminated by CSE. It assumed that only the tuple generators
could be eliminated. In some situations this meant that it got into
a state where it was replacing references to selectors with references
to dead selectors in the wrong block.
To fix this we move the fixup code after the CSE rewrites have been
applied. This removes any difficult-to-reason-about interactions
with the CSE rewriter.
Fixes#38916.
Change-Id: I2211982dcdba399d03299f0a819945b3eb93b291
Reviewed-on: https://go-review.googlesource.com/c/go/+/233857
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
- Avoid starting subprocesses when the test is already very close to
timing out. The overhead of starting and stopping processes may
cause the test to exceed its deadline even if each individual
process is signaled soon after it is started.
- If a command does not shut down quickly enough after receiving
os.Interrupt, send it os.Kill using the same style of grace period
as in CL 228438.
- Fail the test if a background command whose exit status is not
ignored is left running at the end of the test. We have no reliable
way to distinguish a failure due to the termination signal from an
unexpected failure, and the termination signal varies across
platforms (so may cause failure on one platform but success on
another).
For #38797
Change-Id: I767898cf551dca45579bf01a9d1bb312e12d6193
Reviewed-on: https://go-review.googlesource.com/c/go/+/233526
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Use uint32 consistently for local index (this is what the object
file uses).
Use a index, instead of a pointer, to refer to the object file.
This reduces memory usage and GC work.
This reduces some allocations. Linking cmd/compile,
name old alloc/op new alloc/op delta
Loadlib_GC 19.9MB ± 0% 16.9MB ± 0% -15.33% (p=0.008 n=5+5)
name old live-B new live-B delta
Loadlib_GC 12.6M ± 0% 11.3M ± 0% -9.97% (p=0.008 n=5+5)
Change-Id: I20ce60bbb6d31abd2e9e932bdf959e2ae840ab98
Reviewed-on: https://go-review.googlesource.com/c/go/+/233779
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
While reviewing CL 228784, I noticed that various filepath.WalkFunc
implementations within cmd/go were dropping non-nil errors.
Those errors turn out to be significant, at least in some cases: for
example, they can cause packages to appear to be missing when any
parent of the directory had the wrong permissions set.
(This also turned up a bug in the existing list_dedup_packages test,
which was accidentally passing a nonexistent directory instead of the
intended duplicate path.)
Change-Id: Ia09a0a33aa7a966d9f132d3747d6c674a5370b2d
Reviewed-on: https://go-review.googlesource.com/c/go/+/232579
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
As per discussion on the accepted proposals, enable these vet checks by
default in the go command. Update corresponding documentation as well.
Updates #32479.
Updates #4483.
Change-Id: Ie93471930c24dbb9bcbf7da5deaf63bc1a97a14f
Reviewed-on: https://go-review.googlesource.com/c/go/+/232660
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- Don't assume that a process interrupted at 100μs intervals will have
enough remaining time to make progress. (Stop sending signals
in between signal storms to allow the process to quiesce.)
- Don't assume that a child process that spins for 1ms will block long
enough for the parent process to receive signals or make meaningful
progress. (Instead, have the child block indefinitely, and unblock
it explicitly after the signal storm.)
For #39043
Updates #22838
Updates #20400
Change-Id: I85cba23498c346a637e6cfe8684ca0c478562a93
Reviewed-on: https://go-review.googlesource.com/c/go/+/233877
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Remove the loader's PropagateSymbolChangesBackToLoader and
PropagateLoaderChangesToSymbols shim functions. These were used at one
point to enable conversion of phases in the linker that were
"downstream" of loadlibfull -- given the current wavefront position
there's not much point keeping them around.
Change-Id: I3f01f25b70b1b80240369c8f3a10dca89931610f
Reviewed-on: https://go-review.googlesource.com/c/go/+/233817
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
