If both inputs are constant offsets from the same pointer then we
can evaluate NeqPtr and EqPtr at compile time. Triggers a few times
during all.bash. Removes a conditional branch in the following
code:
copy(x[1:], x[:])
This branch was recently added as an optimization in CL 94596. We
now skip the memmove if the pointers are equal. However, in the
above code we know at compile time that they are never equal.
Also, when the offset is variable, check if the offset is zero
rather than if the pointers are equal. For example:
copy(x[a:], x[:])
This would now skip the copy if a == 0, rather than if x + a == x.
Finally I've also added a rule to make IsNonNil true for pointers
to values on the stack. The nil check elimination pass will catch
these anyway, but eliminating them here might eliminate branches
earlier.
Change-Id: If72f436fef0a96ad0f4e296d3a1f8b6c3e712085
Reviewed-on: https://go-review.googlesource.com/106635
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
While writing CL 107315, I went back and forth for the syntax used for
constraints of build environments in which the architecture did not
support varitants ("plan9/amd64" vs "plan9/amd64/"). I eventually
settled for the latter because the code required less heuristics
(think parsing "plan9/386" vs "386/sse2") but there were a few
leftovers in code and comments.
Change-Id: I9d9a008f3814f9a1642609650eb571e7f1a675cf
Reviewed-on: https://go-review.googlesource.com/107338
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL makes the codegen testsuite automatically test all
architecture variants for architecture specified in tests. For
instance, if a test file specifies a "arm" test, it will be
automatically run on all GOARM variants (5,6,7), to increase
the coverage.
The CL also introduces a syntax to specify only a specific
variant (eg: "arm/7") in case the test makes sense only there.
The same syntax also allows to specify the operating system
in case it matters (eg: "plan9/386/sse2").
Fixes#24658
Change-Id: I2eba8b918f51bb6a77a8431a309f8b71af07ea22
Reviewed-on: https://go-review.googlesource.com/107315
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
And remove it from asmtest. Next CL will remove the whole
asmtest infrastructure.
Change-Id: I5851bf7c617456d62a3c6cffacf70252df7b056b
Reviewed-on: https://go-review.googlesource.com/107335
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The escape analysis models "loop depth". If the address of an
expression is assigned to something defined at a lower (outer)
loop depth, the escape analysis decides it escapes. However, it
uses the loop depth of the address operator instead of where
the RHS is defined. This causes an unnecessary escape if there is
an assignment inside a loop but the RHS is defined outside the
loop. This CL propagates the loop depth.
Fixes#24730.
Change-Id: I5ff1530688bdfd90561a7b39c8be9bfc009a9dae
Reviewed-on: https://go-review.googlesource.com/105257
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
I was wrong. There was a need to loop here.
Fixes#24761
Change-Id: If13b3ab72febde930bdaebdddd1c05e0d0446020
Reviewed-on: https://go-review.googlesource.com/105615
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
And delete them from asm_test.
Also delete an arm64 cmov test has been already ported to the new test
harness.
Change-Id: I4458721e1f512bc9ecbbe1c22a2c9c7109ad68fe
Reviewed-on: https://go-review.googlesource.com/106335
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
The check was previously disallowing package main from even importing
a non-function symbol named "main".
Fixes#24801.
Change-Id: I849b9713890429f0a16860ef16b5dc7e970d04a4
Reviewed-on: https://go-review.googlesource.com/106120
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
And delete them from asm_test.
Change-Id: I24f421b87e8cb4770c887a6dfd58eacd0088947d
Reviewed-on: https://go-review.googlesource.com/106056
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I9a75efe9858ef9d7ac86065f860c2ae3f25b0941
Reviewed-on: https://go-review.googlesource.com/105597
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Also, when statically building itabs, compare *types.Sym instead of
name alone so that method sets with duplicate non-exported methods are
handled correctly.
Fixes#24693.
Change-Id: I2db8a3d6e80991a71fef5586a15134b6de116269
Reviewed-on: https://go-review.googlesource.com/105039
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Previously, constant pointer-typed expressions could use either Mpint
or NilVal as their Val depending on their construction, but const.go
expects each type to have a single corresponding Val kind.
This CL changes pointer-typed expressions to exclusively use Mpint.
Fixes#21221.
Change-Id: I6ba36c9b11eb19a68306f0b296acb11a8c254c41
Reviewed-on: https://go-review.googlesource.com/105315
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Multi-byte comparison operations were used on amd64, arm64, i386
and s390x for comparisons with constant arrays, but only amd64 and
i386 for comparisons with string constants. This CL combines the
check for platform capability, since they have the same requirements,
and also enables both on ppc64le which also supports load merging.
Note that these optimizations currently use little endian byte order
which results in byte reversal instructions on s390x. This should
be fixed at some point.
Change-Id: Ie612d13359b50c77f4d7c6e73fea4a59fa11f322
Reviewed-on: https://go-review.googlesource.com/102558
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I0e33d58274951ab5acb67b0117b60ef617ea887a
Reviewed-on: https://go-review.googlesource.com/105735
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Method expressions with anonymous receiver types like "struct { T }.m"
require wrapper functions, which we weren't always creating. This in
turn resulted in linker errors.
This CL ensures that we generate wrapper functions for any anonymous
receiver types used in a method expression.
Fixes#22444.
Change-Id: Ia8ac27f238c2898965e57b82a91d959792d2ddd4
Reviewed-on: https://go-review.googlesource.com/105044
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
There were multiple ad hoc ways to create method symbols, with subtle
and confusing differences between them. This CL unifies them into a
single well-documented encoding and implementation.
This introduces some inconsequential changes to symbol format for the
sake of simplicity and consistency. Two notable changes:
1) Symbol construction is now insensitive to the package currently
being compiled. Previously, non-exported methods on anonymous types
received different method symbols depending on whether the method was
local or imported.
2) Symbols for method values parenthesized non-pointer receiver types
and non-exported method names, and also always package-qualified
non-exported method names. Now they use the same rules as normal
method symbols.
The methodSym function is also now stricter about rejecting
non-sensical method/receiver combinations. Notably, this means that
typecheckfunc needs to call addmethod to validate the method before
calling declare, which also means we no longer emit errors about
redeclaring bogus methods.
Change-Id: I9501c7a53dd70ef60e5c74603974e5ecc06e2003
Reviewed-on: https://go-review.googlesource.com/104876
Reviewed-by: Robert Griesemer <gri@golang.org>
Since it's been reliably failing on one of the linux-arm builders
(arm5spacemonkey) for a long time.
Updates #24221.
Change-Id: I8fccc7e16631de497ccc2c285e510a110a93ad95
Reviewed-on: https://go-review.googlesource.com/104535
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
And delete them from asm_test.
Change-Id: Id533130470da9176a401cb94972f626f43a62148
Reviewed-on: https://go-review.googlesource.com/103656
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
The logic in addBranchRestrictions didn't allow to correctly
model OpIs(Slice)Bound for signed domain, and it was also partly
implemented within addRestrictions.
Thanks to the previous changes, it is now possible to handle
the negative conditions correctly, so that we can learn
both signed/LT + unsigned/LT on the positive side, and
signed/GE + unsigned/GE on the negative side (but only if
the index can be proved to be non-negative).
This is able to prove ~50 more slice accesses in std+cmd.
Change-Id: I9858080dc03b16f85993a55983dbc4b00f8491b0
Reviewed-on: https://go-review.googlesource.com/104037
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Don't report errors if we don't have a correct type switch
guard; instead ignore it and leave it to the type-checker
to report the error. This leads to better error messages
concentrating on the type switch guard rather than errors
around (confusing) syntactic details.
Also clean up some code setting up AssertExpr (they never
have a nil Type field) and remove some incorrect TODOs.
Fixes#24470.
Change-Id: I69512f36e0417e3b5ea9c8856768e04b19d654a8
Reviewed-on: https://go-review.googlesource.com/103615
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When test/run script was removed, these two tests
were changed to be executed by test/run.go.
Because errchk does not exit with non-zero status on
errors, they were silently failing for a while.
This change makes 2 things:
1. Compile tested packages in GOROOT/test to match older runner script
behavior (strictly required only in bug345, optional in bug248)
2. Check command output with "(?m)^BUG" regexp.
It approximates older `grep -q '^BUG' that was used before.
See referenced issue for detailed explanation.
Fixes#24629
Change-Id: Ie888dcdb4e25cdbb19d434bbc5cb03eb633e9ee8
Reviewed-on: https://go-review.googlesource.com/104095
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 38338 introduced SSA rules to optimize two types of pointer equality
tests: a pointer compared with itself, and comparison of addresses taken
of two symbols which may have the same base. This patch adds rules to
apply the same optimization to pointer inequality tests, which also ensures
that two pointers to zero-width types cannot be both equal and unequal
at the same time.
Fixes#24503.
Change-Id: Ic828aeb86ae2e680caf66c35f4c247674768a9ba
Reviewed-on: https://go-review.googlesource.com/102275
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
And delete them from asm_test.
Change-Id: Idfe1249052d82d15b9c30b292c78656a0bf7b48d
Reviewed-on: https://go-review.googlesource.com/103315
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This change modifies the codegen test harness driver so that it no
longer modifies the environment GOOS/GOARCH, since that seems to cause
flakiness in other concurrently-running tests.
The change also enables the codegen tests in run.go.
Fixes#24538
Change-Id: I997ac1eb38eb92054efff67fe5c4d3cccc86412b
Reviewed-on: https://go-review.googlesource.com/103455
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The escape_because.go test file (which tests the "because" escape
explainations printed by `-m -m`) cointains a machine-generated list
of all the escape reasons seen in the escape tests.
The list appears to be outdated; moreove a new escape reason was added
in CL 102895. This change re-generates the list.
Change-Id: Idc721c6bbfe9516895b5cf1e6d09b77deda5a3dd
Reviewed-on: https://go-review.googlesource.com/103375
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change makes `-m -m` print a better explanation for the case
where a slice is marked as escaping and heap-allocated because it
has a non-constant len/cap.
Fixes#24578
Change-Id: I0ebafb77c758a99857d72b365817bdba7b446cc0
Reviewed-on: https://go-review.googlesource.com/102895
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
In expandmeth, we call expand1/expand0 to build a list of all
candidate methods to promote, and then we use dotpath to prune down
which names actually resolve to a promoted method and how.
However, previously we still computed "followsptr" based on the
expand1/expand0 traversal (which is depth-first), rather than
dotpath (which is breadth-first). The result is that we could
sometimes end up miscomputing whether a particular promoted method
involves a pointer traversal, which could result in bad code
generation for method trampolines.
Fixes#24547.
Change-Id: I57dc014466d81c165b05d78b98610dc3765b7a90
Reviewed-on: https://go-review.googlesource.com/102618
Reviewed-by: Robert Griesemer <gri@golang.org>
And delete them from asm_test.
Change-Id: I34fcf85ae8ce09cd146fe4ce6a0ae7616bd97e2d
Reviewed-on: https://go-review.googlesource.com/102296
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
And remove them from asm_test.
Change-Id: I1ca29b40546d6de06f20bfd550ed8ff87f495454
Reviewed-on: https://go-review.googlesource.com/102115
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I64c512bfef3b3da6db5c5d29277675dade28b8ab
Reviewed-on: https://go-review.googlesource.com/101595
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
The atomic add instructions modify the condition code and so need to
be marked as clobbering flags.
Fixes#24449.
Change-Id: Ic69c8d775fbdbfb2a56c5e0cfca7a49c0d7f6897
Reviewed-on: https://go-review.googlesource.com/101455
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
And delete them from asm_test.
Change-Id: I3cf0934706a640136cb0f646509174f8c1bf3363
Reviewed-on: https://go-review.googlesource.com/101395
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
And delete them from asm_test.
Change-Id: Ibdaca3496eefc73c731b511ddb9636a1f3dff68c
Reviewed-on: https://go-review.googlesource.com/100915
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I29c8d098a8893e6b669b6272a2f508985ac9d618
Reviewed-on: https://go-review.googlesource.com/100876
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This reverts commit 080187f4f7.
It broke build of golang.org/x/exp/shiny/iconvg
See issue 24395 for details
Change-Id: Ifd6134f6214e6cee40bd3c63c32941d5fc96ae8b
Reviewed-on: https://go-review.googlesource.com/100755
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
