On MIPS, Linux returns whether the syscall had an error in a separate
register (R7), not using a negative return value as on other
architectures. Thus, skip TestSyscallNoError as there is no error case
for syscall.RawSyscall which it could test against.
Also reformat the error output so the expected and gotten values are
aligned so they're easier to compare.
Fixes#35422
Change-Id: Ibc88f7c5382bb7ee8faf15ad4589ca1f9f017a06
Reviewed-on: https://go-review.googlesource.com/c/go/+/205898
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This restores intrinsic status to functions copied from math/bits
into runtime/internal/sys, as an aid to runtime performance.
Updates #35112.
Change-Id: I41a7d87cf00f1e64d82aa95c5b1000bc128de820
Reviewed-on: https://go-review.googlesource.com/c/go/+/206200
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Now that the runtime can send preemption signals, it is possible that
a channel that asks for all signals can see both SIGURG and SIGHUP
before reading either, in which case one of the signals will be dropped.
We have to use a larger buffer so that the test see the signal it expects.
Fixes#35466
Change-Id: I36271eae0661c421780c72292a5bcbd443ada987
Reviewed-on: https://go-review.googlesource.com/c/go/+/206257
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
CL 201765 activated calls from the runtime to functions in math/bits.
When coverage and race detection were simultaneously enabled,
this caused a crash when the covered+race-checked code in
math/bits was called from the runtime before there was even a P.
PS Win for gdlv in helping sort this out.
TODO - next CL intrinsifies the new functions in
runtime/internal/sys
TODO/Would-be-nice - Ctz64 and TrailingZeros64 are the same
function; 386.s is intrinsified; clean all that up.
Fixes#35461.
Updates #35112.
Change-Id: I750a54dba493130ad3e68a06530ede7687d41e1d
Reviewed-on: https://go-review.googlesource.com/c/go/+/206199
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously langSupported applied -lang as though it's a global
restriction, but it's actually a per-package restriction. This CL
fixes langSupported to take a *types.Pkg parameter to reflect this and
updates its callers accordingly.
This is relevant for signed shifts (added in Go 1.12), because they
can be inlined into a Go 1.11 package; and for overlapping interfaces
(added in Go 1.13), because they can be exported as part of the
package's API.
Today we require all Go packages to be compiled with the same
toolchain, and all uses of langSupported are for controlling
backwards-compatible features. So we can simply assume that since the
imported packages type-checked successfully, they must have been
compiled with an appropriate -lang setting.
In the future if we ever want to use langSupported to control
backwards-incompatible language changes, we might need to record the
-lang flag used for compiling a package in its export data.
Fixes#35437.
Fixes#35442.
Change-Id: Ifdf6a62ee80cd5fb4366cbf12933152506d1b36e
Reviewed-on: https://go-review.googlesource.com/c/go/+/205977
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Unlike function calls, when processing instructions that directly
fault we must not subtract 1 from the pc before looking up the
file/line information.
Since the file/line lookup unconditionally subtracts 1, add 1 to
the faulting instruction PCs to compensate.
Fixes#34123
Change-Id: Ie7361e3d2f84a0d4f48d97e5a9e74f6291ba7a8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/196962
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Changing the Import function to return a PackageNotInModuleError if no
package was found in a local module. This replacing the vague message
"missing dot in first path element" you get today with much more friendly
one - "module was found, but does not contain package".
Fixes#35273
Change-Id: I6d726c17e6412258274b10f58f76621617d26e0a
Reviewed-on: https://go-review.googlesource.com/c/go/+/203118
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
This adds pipe/pipe2 on Solaris as they exist on other Unix systems.
They were not added previously because Solaris does not need them
for netpollBreak. They are added now in preparation for using pipes
in TestSignalM.
Updates #35276
Change-Id: I53dfdf077430153155f0a79715af98b0972a841c
Reviewed-on: https://go-review.googlesource.com/c/go/+/206077
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Support "gzip" aka "x-gzip" as a transfer-encoding for
requests and responses as per RFC 7230 Section 3.3.1.
"gzip" and "x-gzip" are equivalents as requested by
RFC 7230 Section 4.2.3.
Transfer-Encoding is an on-fly property of the body
that can be applied by proxies, other servers and basically
any intermediary to transport the content e.g. across data centers
or backends/machine to machine that need compression.
For this change, "gzip" is both explicitly and implicitly combined
with transfer-encoding "chunked" in an ordering such as:
Transfer-Encoding: gzip, chunked
and NOT
Transfer-Encoding: chunked, gzip
Obviously the latter form is counter-intuitive for streaming.
Thus "chunked" is the last value to appear in that transfer-encoding header,
if explicitly included.
When parsing the response, the chunked body is concatenated as "chunked" does,
before finally being decompressed as "gzip".
A chunked and compressed body would typically look like this:
<LENGTH_1>\r\n<CHUNK_1_GZIPPED_BODY>\r\n<LENGTH_2>\r\n<CHUNK_2_GZIPPED_BODY>\0\r\n
which when being processed we would contentate
<FULL_BODY> := <CHUNK_1_GZIPPED_BODY> + <CHUNK_2_GZIPPED_BODY> + ...
and then finally gunzip it
<FINAL_BODY> := gunzip(<FULL_BODY>)
If a "chunked" transfer-encoding is NOT applied but "gzip" is applied,
we implicitly assume that they requested using "chunked" at the end.
This is as per the recommendation of RFC 3.3.1. which explicitly says
that for:
* Request:
" If any transfer coding
other than chunked is applied to a request payload body, the sender
MUST apply chunked as the final transfer coding to ensure that the
message is properly framed."
* Response:
" If any transfer coding other than
chunked is applied to a response payload body, the sender MUST either
apply chunked as the final transfer coding or terminate the message
by closing the connection."
RELNOTE=yes
Fixes#29162
Change-Id: Icb8b8b838cf4119705605b29725cabb1fe258491
Reviewed-on: https://go-review.googlesource.com/c/go/+/166517
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
pregrow result array to avoid small allocation.
Change-Id: Ife5f815efa4c163ecdbb3a4c16bfb60a484dfa11
Reviewed-on: https://go-review.googlesource.com/c/go/+/174706
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Use names to better communicate when a test case fails.
Change-Id: Id882783cb5e444b705443fbcdf612713f8a3b032
Reviewed-on: https://go-review.googlesource.com/c/go/+/187823
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Without this CL, one of the TestDebugCall tests would fail 1% to 2% of
the time on the android-amd64-emu gomote. With this CL, I ran the
tests for 1000 iterations with no failures.
Fixes#32985
Change-Id: I541268a2a0c10d0cd7604f0b2dbd15c1d18e5730
Reviewed-on: https://go-review.googlesource.com/c/go/+/205248
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This change adds a per-p free page cache which the page allocator may
allocate out of without a lock. The change also introduces a completely
lockless page allocator fast path.
Although the cache contains at most 64 pages (and usually less), the
vast majority (85%+) of page allocations are exactly 1 page in size.
Updates #35112.
Change-Id: I170bf0a9375873e7e3230845eb1df7e5cf741b78
Reviewed-on: https://go-review.googlesource.com/c/go/+/195701
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Austin Clements <austin@google.com>
This change adds a page cache structure which owns a chunk of free pages
at a given base address. It also adds code to allocate to this cache
from the page allocator. Finally, it adds tests for both.
Notably this change does not yet integrate the code into the runtime,
just into runtime tests.
Updates #35112.
Change-Id: Ibe121498d5c3be40390fab58a3816295601670df
Reviewed-on: https://go-review.googlesource.com/c/go/+/196643
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Make binary.Read return an error when passed `data` argument is not
a pointer to a fixed-size value or a slice of fixed-size values.
Fixes#32927
Change-Id: I04f48be55fe9b0cc66c983d152407d0e42cbcd95
Reviewed-on: https://go-review.googlesource.com/c/go/+/184957
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change adds a per-p mspan object cache similar to the sudog cache.
Unfortunately this cache can't quite operate like the sudog cache, since
it is used in contexts where write barriers are disallowed (i.e.
allocation codepaths), so rather than managing an array and a slice,
it's just an array and a length. A little bit more unsafe, but avoids
any write barriers.
The purpose of this change is to reduce the number of operations which
require the heap lock in allocation, paving the way for a lockless fast
path.
Updates #35112.
Change-Id: I32cfdcd8528fb7be985640e4f3a13cb98ffb7865
Reviewed-on: https://go-review.googlesource.com/c/go/+/196642
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This change combines the functionality of allocSpanLocked, allocManual,
and alloc_m into a new method called allocSpan. While these methods'
abstraction boundaries are OK when the heap lock is held throughout,
they start to break down when we want finer-grained locking in the page
allocator.
allocSpan does just that, and only locks the heap when it absolutely has
to. Piggy-backing off of work in previous CLs to make more of span
initialization lockless, this change makes span initialization entirely
lockless as part of the reorganization.
Ultimately this change will enable us to add a lockless fast path to
allocSpan.
Updates #35112.
Change-Id: I99875939d75fb4e958a67ac99e4a7cda44f06864
Reviewed-on: https://go-review.googlesource.com/c/go/+/196641
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Currently gcSweepBuf guarantees that push operations may be performed
concurrently with each other and that block operations may be performed
concurrently with push operations as well.
Unfortunately, this isn't quite true. The existing code allows push
operations to happen concurrently with each other, but block operations
may return blocks with nil entries. The way this can happen is if two
concurrent pushers grab a slot to push to, and the first one (the one
with the earlier slot in the buffer) doesn't quite write a span value
when the block is called. The existing code in block only checks if the
very last value in the block is nil, when really an arbitrary number of
the last few values in the block may or may not be nil.
Today, this case can't actually happen because when push operations
happen concurrently during a GC (which is the only time block is
called), they only ever happen during an allocation with the heap lock
held, effectively serializing them. A block operation may happen
concurrently with one of these pushes, but its callers will never see a
nil mspan. Outside of a GC, this isn't a problem because although push
operations from allocations can run concurrently with push operations
from sweeping, block operations will never run.
In essence, the real concurrency guarantees provided by gcSweepBuf are
that block operations may happen concurrently with push operations, but
that push operations may not be concurrent with each other if there are
any block operations.
To fix this, and to prepare for push operations happening without the
heap lock held in a future CL, we update the documentation for block to
correctly state that there may be nil entries in the returned slice.
While we're here, make the mspan writes into the buffer atomic to avoid
a block user racing on a nil check, and document that the user should
load mspan values from the returned slice atomically. Finally, we make
all callers of block adhere to the new rules.
We choose to allow nil values rather than filter them out because the
only caller of block is markrootSpans, and if it catches a nil entry,
then there wasn't anything to mark in there anyway since the span is
just being created.
Updates #35112.
Change-Id: I6450aab15f51690d7a000ba5b3d529cf2ca5da1e
Reviewed-on: https://go-review.googlesource.com/c/go/+/203318
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This change makes it so that allocation and free related page sweeper
metadata operations (e.g. pageInUse and pagesInUse) are atomic rather
than protected by the heap lock. This will help in reducing the length
of the critical path with the heap lock held in future changes.
Updates #35112.
Change-Id: Ie82bff024204dd17c4c671af63350a7a41add354
Reviewed-on: https://go-review.googlesource.com/c/go/+/196640
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
When the frame size is large, we generate
MOVD.P 0xf0(SP), LR
ADD $(framesize-0xf0), SP
This is problematic: after the first instruction, we have a
partial frame of size (framesize-0xf0). If we try to unwind the
stack at this point, we'll try to read the LR from the stack at
0(SP) (the new SP) as the frame size is not 0. But this slot does
not contain a valid LR.
Fix this by not changing SP in two instructions. Instead,
generate
MOVD (SP), LR
ADD $framesize, SP
This affects not only async preemption but also profiling. So we
change the generated instructions, instead of marking unsafe
point.
Change-Id: I4e78c62d50ffc4acff70ccfbfec16a5ccae17f24
Reviewed-on: https://go-review.googlesource.com/c/go/+/206057
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL adds support of call injection and async preemption on
PPC64.
For the injected call to return to the preempted PC, we have to
clobber either LR or CTR. For reasons mentioned in previous CLs,
we choose CTR. Previous CLs have marked code sequences that use
CTR async-nonpreemtible.
Change-Id: Ia642b5f06a890dd52476f45023b2a830c522eee0
Reviewed-on: https://go-review.googlesource.com/c/go/+/203824
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
mheap_.alloc currently accepts both a spanClass and a "large" parameter
indicating whether the allocation is large. These are redundant, since
spanClass.sizeclass() == 0 is an equivalent way to determine this and is
already used in mheap_.alloc. There are no places in the runtime where
the size class could be non-zero and large == true.
Updates #35112.
Change-Id: Ie66facf8f0faca6f4cd3d20a8ac4bc259e11823d
Reviewed-on: https://go-review.googlesource.com/c/go/+/196639
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This change defines a maximum supported physical and huge page size in
the runtime based on the new page allocator's implementation, and uses
them where appropriate.
Furthemore, if the system exceeds the maximum supported huge page
size, we simply ignore it silently.
It also fixes a huge-page-related test which is only triggered by a
condition which is definitely wrong.
Finally, it adds a few TODOs related to code clean-up and supporting
larger huge page sizes.
Updates #35112.
Fixes#35431.
Change-Id: Ie4348afb6bf047cce2c1433576d1514720d8230f
Reviewed-on: https://go-review.googlesource.com/c/go/+/205937
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
If QEMU user-mode is actually a supported configuration, then per
http://golang.org/wiki/PortingPolicy it needs to have a builder
running tests for all packages, not just a simple “hello world”
program.
Updates #1508
Updates #13024Fixes#35457
Change-Id: Ib6122b06ad1d265550a0e92131506266495893cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/206137
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For the most part, heap memstats are already updated atomically when
passed down to OS-level memory functions (e.g. sysMap). Elsewhere,
however, they're updated with the heap lock.
In order to facilitate holding the heap lock for less time during
allocation paths, this change more consistently makes the update of
these statistics atomic by calling mSysStat{Inc,Dec} appropriately
instead of simply adding or subtracting. It also ensures these values
are loaded atomically.
Furthermore, an undocumented but safe update condition for these
memstats is during STW, at which point using atomics is unnecessary.
This change also documents this condition in mstats.go.
Updates #35112.
Change-Id: I87d0b6c27b98c88099acd2563ea23f8da1239b66
Reviewed-on: https://go-review.googlesource.com/c/go/+/196638
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This change removes useless additional heap_objects accounting for large
objects. heap_objects is computed from scratch at ReadMemStats time
(which stops the world) by using nlargealloc and nlargefree, so mutating
heap_objects turns out to be pointless.
As a result, the "large" parameter on "mheap_.freeSpan" is no longer
necessary and so this change cleans that up too.
Change-Id: I7d6b486d9b57c018e3db46221d81b55fe4c1b021
Reviewed-on: https://go-review.googlesource.com/c/go/+/196637
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
In preparation for a lockless fast path in the page allocator, this
change makes it so that checking if an allocation needs to be zeroed may
be done atomically.
Unfortunately, this means there is a CAS-loop to ensure monotonicity of
the zeroedBase value in heapArena. This CAS-loop exits if an allocator
acquiring memory further on in the arena wins or if it succeeds. The
CAS-loop should have a relatively small amount of contention because of
this monotonicity, though it would be ideal if we could just have
CAS-ers with the greatest value always win. The CAS-loop is unnecessary
in the steady-state, but should bring some start-up performance gains as
it's likely cheaper than the additional zeroing required, especially for
large allocations.
For very large allocations that span arenas, the CAS-loop should be
completely uncontended for most of the arenas it touches, it may only
encounter contention on the first and last arena.
Updates #35112.
Change-Id: If3d19198b33f1b1387b71e1ce5902d39a5c0f98e
Reviewed-on: https://go-review.googlesource.com/c/go/+/203859
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This test is failing consistently in the longtest builders,
potentially masking regressions in other packages.
Updates #35271
Change-Id: Idc03171c0109b5c8d4913e0af2078c1115666897
Reviewed-on: https://go-review.googlesource.com/c/go/+/206098
Reviewed-by: Carlos Amedee <carlos@golang.org>
This reverts CL 169501.
Reason for revert: The new tests fail at least on s390x and MIPS. This is likely a minor bug in the compiler or runtime. But this point in the release cycle is not the time to debug these details, which are unlikely to be new. Let's try again for 1.15.
Updates #29320Fixes#35443
Change-Id: I2218b2083f8974b57d528e3742524393fc72b355
Reviewed-on: https://go-review.googlesource.com/c/go/+/206037
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The pprof profile proto message expects inlined functions of a PC
to be encoded in one Location entry using multiple Line entries.
https://github.com/google/pprof/blob/5e96527/proto/profile.proto#L177-L184
runtime/pprof has encoded the symbolization information by creating
a Location for each PC found in the stack trace and including info
from all the frames expanded from the PC using runtime.CallersFrames.
This assumes inlined functions are represented as a single PC in the
stack trace. (https://go-review.googlesource.com/41256)
In the recent years, behavior around inlining and the traceback
changed significantly (e.g. https://golang.org/cl/152537,
https://golang.org/issue/29582, and many changes). Now the PCs
in the stack trace represent user frames even including inline
marks. As a result, the profile proto started to allocate a Location
entry for each user frame, lose the inline information (so pprof
presented incorrect results when inlined functions are involved),
and confuse the pprof tool with those PCs made up for inline marks.
This CL attempts to detect inlined call frames from the stack traces
of CPU profiles, and organize the Location information as intended.
Currently, runtime does not provide a reliable and convenient way to
detect inlined call frames and expand user frames from a given externally
recognizable PCs. So we use heuristics to recover the groups
- inlined call frames have nil Func field
- inlined call frames will have the same Entry point
- but must be careful with recursive functions that have the
same Entry point by definition, and non-Go functions that
may lack most of the fields of Frame.
The followup CL will address the issue with other profile types.
Change-Id: I0c9667ab016a3e898d648f31c3f82d84c15398db
Reviewed-on: https://go-review.googlesource.com/c/go/+/204636
Reviewed-by: Keith Randall <khr@golang.org>
This change removes the old page allocator from the runtime.
Updates #35112.
Change-Id: Ib20e1c030f869b6318cd6f4288a9befdbae1b771
Reviewed-on: https://go-review.googlesource.com/c/go/+/195700
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This change flips the oldPageAllocator constant enabling the new page
allocator in the Go runtime.
Updates #35112.
Change-Id: I7fc8332af9fd0e43ce28dd5ebc1c1ce519ce6d0c
Reviewed-on: https://go-review.googlesource.com/c/go/+/201765
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This accidentally got committed - please review the whole paragraph
as if it was new.
Change-Id: I98e1db4670634c6e792d26201ce0cd329a6928b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/202579
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL also restores analysis details for (1) expressions that are
directly heap allocated because of being too large for the stack or
non-constant in size, and (2) for assignments that we short circuit
because we flow their address to another escaping object.
No change to normal compilation behavior. Only adds additional Printfs
guarded by -m=2.
Updates #31489.
Change-Id: I43682195d389398d75ced2054e29d9907bb966e7
Reviewed-on: https://go-review.googlesource.com/c/go/+/205917
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
