The significant change between TLS 1.0 and 1.1 is the addition of an explicit IV in the case of CBC encrypted records. Support for TLS 1.1 is needed in order to support TLS 1.2.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/7880043
Changeset 7557a627e9b5 added a temporary stop-gap to silence
a print format warning for %S. This has been reverted.
None of this code is original. It was copied from the latest
Plan 9 compilers.
R=golang-dev, r, rsc
CC=golang-dev
https://golang.org/cl/8630044
Each of the backends has two prototypes for this function but
no corresponding definition.
R=golang-dev, bradfitz, khr
CC=golang-dev
https://golang.org/cl/9930045
These two symbols don't show up in the Go symbol table
since they're defined in dodata which is called sometime
after symtab. They do, however, show up in the ELF symbol
table.
This regression was introduced in changeset 01c40d533367.
Also, remove the corresponding strings from the ELF strtab
section now that they're unused.
R=golang-dev, iant
CC=golang-dev
https://golang.org/cl/8650043
Remove unnecessary ( ) around == in && clause.
Add { } around multiline if body, even though it's one statement.
Add runtime: prefix to printed errors.
R=cshapiro, iant
CC=golang-dev
https://golang.org/cl/9685047
This is part of preemptive scheduler.
stackguard0 is checked in split stack checks and can be set to StackPreempt.
stackguard is not set to StackPreempt (holds the original value).
R=golang-dev, daniel.morsing, iant
CC=golang-dev
https://golang.org/cl/9875043
Fixes#5599.
Thanks to minux.ma for the suggested fix.
As we now have a harness to test testing internal functions I added some coverage for testing.roundUp, as it is the main consumer of roundDown10.
R=minux.ma, kr, r
CC=golang-dev
https://golang.org/cl/9926043
Before this change, grow work was done only
during map writes to ensure multithreaded safety.
This can lead to maps remaining in a partially
grown state for a long time, potentially forever.
This change allows grow work to happen during reads,
which will lead to grow work finishing sooner, making
the resulting map smaller and faster.
Grow work is not done in parallel. Reads can
happen in parallel while grow work is happening.
R=golang-dev, dvyukov, khr, iant
CC=golang-dev
https://golang.org/cl/8852047
instead of regular g stack. We do this so that the g stack
we're currently running on is no longer changing. Cuts
the root set down a bit (g0 stacks are not scanned, and
we don't need to scan gc's internal state). Also an
enabler for copyable stacks.
R=golang-dev, cshapiro, khr, 0xe2.0x9a.0x9b, dvyukov, rsc, iant
CC=golang-dev
https://golang.org/cl/9754044
An embedded trampoline is a function that exists to marshal
a receiver of type *S to a receiver of type *T when T is an
embedded field in S.
Embedded trampolines are generated by a special path through
the compiler and are not subject to the general analysis and
annotation done to functions. Their effects must be provided
explicitly.
R=golang-dev, r, daniel.morsing, minux.ma
CC=golang-dev
https://golang.org/cl/9874043
* Add a CXXFiles field to Package, which includes .cc, .cpp and .cxx files.
* CXXFiles are compiled using g++, which can be overridden using the CXX environment variable.
* Include .hh, .hpp and .hxx files in HFiles.
* Add support for CPPFLAGS (used for both C and C++) and CXXFLAGS (used only for C++) in cgo directive.
* Changed pkg-config cgo directive to modify CPPFLAGS rather than CFLAGS, so both C and C++ files get any flag returned by pkg-config --cflags.
Fixes#1476.
R=iant, r
CC=bradfitz, gobot, golang-dev, iant, minux.ma, remyoudompheng, seb.binet
https://golang.org/cl/8248043
mheap.map become a pointer, so nelem(h->map) returns 1 rather than the map size.
As the result coalescing with subsequent spans does not happen.
R=golang-dev, khr
CC=golang-dev
https://golang.org/cl/9649046
It is a caching wrapper around SysAlloc() that can allocate small chunks.
Use it for symtab allocations. Reduces number of symtab walks from 4 to 3
(reduces buildfuncs time from 10ms to 7.5ms on a large binary,
reduces initial heap size by 680K on the same binary).
Also can be used for type info allocation, itab allocation.
There are also several places in GC where we do the same thing,
they can be changed to use persistentalloc().
Also can be used in FixAlloc, because each instance of FixAlloc allocates
in 128K regions, which is too eager.
Reincarnation of committed and rolled back https://golang.org/cl/9805043
The latent bugs that it revealed are fixed:
https://golang.org/cl/9837049https://golang.org/cl/9778048
R=golang-dev, khr
CC=golang-dev
https://golang.org/cl/9778049
Then use the limit to make sure MHeap_LookupMaybe & inlined
copies don't return a span if the pointer is beyond the limit.
Use this fact to optimize all call sites.
R=golang-dev, dvyukov
CC=golang-dev
https://golang.org/cl/9869045
As the code now says:
We are forced to return a float64 because the API is silly, but do
the division as integers so we can ask if AllocsPerRun()==1
instead of AllocsPerRun()<2.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/9837049
Escape analysis already gives that the underlying array
does not escape but the result was ignored.
Fixes#5484.
R=golang-dev, dave, daniel.morsing
CC=golang-dev
https://golang.org/cl/9662046
A nosplits was assumed to have no argument information and no
pointer map. However, nosplits created by the linker often
have both. This change uses the pointer map size as an
alternate source of argument size when processing a nosplit.
In addition, the symbol table construction pointer map size
and argument size consistency check is strengthened. If a
nptrs is greater than 0 it must be equal to the number of
argument words.
R=golang-dev, khr, khr
CC=golang-dev
https://golang.org/cl/9666047
to avoid unintentionally clobber R9/R10.
Thanks Lucio for the suggestion.
PS: yes, this could be considered a big change (but not an API change), but
as it turns out even temporarily changes R9/R10 in user code is unsafe and
leads to very hard to diagnose problems later, better to disable using R9/R10
when the user first uses it.
See CL 6300043 and CL 6305100 for two problems caused by misusing R9/R10.
R=golang-dev, khr, rsc
CC=golang-dev
https://golang.org/cl/9840043
The old code put the index before the period in the precision;
it should be after so it's always before the star, as documented.
A little trickier to do in one pass but compensated for by more
tests and catching a couple of other error cases.
R=rsc
CC=golang-dev
https://golang.org/cl/9751044
Currently we only check the leaf node's issuer against the list of
distinguished names in the server's CertificateRequest message. This
will fail if the client certiciate has more than one certificate in
the path and the leaf node issuer isn't in the list of distinguished
names, but the issuer's issuer was in the distinguished names.
R=agl, agl
CC=gobot, golang-dev
https://golang.org/cl/9795043
This is needed for preemptive scheduler, because during
stoptheworld we want to wait with timeout and re-preempt
M's on timeout.
R=golang-dev, remyoudompheng, iant
CC=golang-dev
https://golang.org/cl/9375043
With this change the compiler emits a bitmap for each function
covering its stack frame arguments area. If an argument word
is known to contain a pointer, a bit is set. The garbage
collector reads this information when scanning the stack by
frames and uses it to ignores locations known to not contain a
pointer.
R=golang-dev, bradfitz, daniel.morsing, dvyukov, khr, khr, iant, cshapiro
CC=golang-dev
https://golang.org/cl/9223046
This depends on: 9791044: runtime: allocate page table lazily
Once page table is moved out of heap, the heap becomes small.
This removes unnecessary dereferences during heap access.
No logical changes.
R=golang-dev, khr
CC=golang-dev
https://golang.org/cl/9802043
This removes the 256MB memory allocation at startup,
which conflicts with ulimit.
Also will allow to eliminate an unnecessary memory dereference in GC,
because the page table is usually mapped at known address.
Update #5049.
Update #5236.
R=golang-dev, khr, r, khr, rsc
CC=golang-dev
https://golang.org/cl/9791044
Currently the test closes random files descriptors,
which leads to hang (in particular if netpoll fd is closed).
Try to open only fd 3, since the parent process expects it to be fd 3 anyway.
Fixes#5571.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/9778048
The 'n' variable is used during rescan initiation in GC_END case,
but it's overwritten with chan capacity in GC_CHAN case.
As the result rescan is done with the wrong object size.
Fixes#5554.
R=golang-dev, khr
CC=golang-dev
https://golang.org/cl/9831043
multiple failures on amd64
««« original CL description
runtime: introduce helper persistentalloc() function
It is a caching wrapper around SysAlloc() that can allocate small chunks.
Use it for symtab allocations. Reduces number of symtab walks from 4 to 3
(reduces buildfuncs time from 10ms to 7.5ms on a large binary,
reduces initial heap size by 680K on the same binary).
Also can be used for type info allocation, itab allocation.
There are also several places in GC where we do the same thing,
they can be changed to use persistentalloc().
Also can be used in FixAlloc, because each instance of FixAlloc allocates
in 128K regions, which is too eager.
R=golang-dev, daniel.morsing, khr
CC=golang-dev
https://golang.org/cl/9805043
»»»
R=golang-dev
CC=golang-dev
https://golang.org/cl/9822043
It is a caching wrapper around SysAlloc() that can allocate small chunks.
Use it for symtab allocations. Reduces number of symtab walks from 4 to 3
(reduces buildfuncs time from 10ms to 7.5ms on a large binary,
reduces initial heap size by 680K on the same binary).
Also can be used for type info allocation, itab allocation.
There are also several places in GC where we do the same thing,
they can be changed to use persistentalloc().
Also can be used in FixAlloc, because each instance of FixAlloc allocates
in 128K regions, which is too eager.
R=golang-dev, daniel.morsing, khr
CC=golang-dev
https://golang.org/cl/9805043
Variables in data sections of 32-bit executables interfere with
garbage collector's ability to free objects and/or unnecessarily
slow down the garbage collector.
This changeset moves some static variables to .noptr sections.
'files' in symtab.c is now allocated dynamically.
R=golang-dev, dvyukov, minux.ma
CC=golang-dev
https://golang.org/cl/9786044
This text is added to doc.go:
Explicit argument indexes:
In Printf, Sprintf, and Fprintf, the default behavior is for each
formatting verb to format successive arguments passed in the call.
However, the notation [n] immediately before the verb indicates that the
nth one-indexed argument is to be formatted instead. The same notation
before a '*' for a width or precision selects the argument index holding
the value. After processing a bracketed expression [n], arguments n+1,
n+2, etc. will be processed unless otherwise directed.
For example,
fmt.Sprintf("%[2]d %[1]d\n", 11, 22)
will yield "22, 11", while
fmt.Sprintf("%[3]*[2].*[1]f", 12.0, 2, 6),
equivalent to
fmt.Sprintf("%6.2f", 12.0),
will yield " 12.00". Because an explicit index affects subsequent verbs,
this notation can be used to print the same values multiple times
by resetting the index for the first argument to be repeated:
fmt.Sprintf("%d %d %#[1]x %#x", 16, 17)
will yield "16 17 0x10 0x11".
The notation chosen differs from that in C, but I believe it's easier to read
and to remember (we're indexing the arguments), and compatibility with
C's printf was never a strong goal anyway.
While we're here, change the word "field" to "arg" or "argument" in the
code; it was being misused and was confusing.
R=rsc, bradfitz, rogpeppe, minux.ma, peter.armitage
CC=golang-dev
https://golang.org/cl/9680043
Set $status as null to prevent rc from exiting
on the last --no-banner argument checking when
used with rc -e. It allows all.rc to not exit
before executing run.rc
R=golang-dev, lucio.dere, rsc
CC=golang-dev
https://golang.org/cl/9611045
crypto/x509 has ended up with a variety of error formats. This change makes them all start with "x509: ".
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/9736043
It doesn't work, it's not portable, it's not part of the released
binaries, and a better tool is due.
Fixes#1319.
Fixes#4621.
R=golang-dev, bradfitz, dave, rsc
CC=golang-dev
https://golang.org/cl/9681044
According to X.690, only 0 and 255 are allowed as values
for encoded booleans. Also added some test for parsing
booleans
R=golang-dev, agl, r
CC=golang-dev
https://golang.org/cl/9692043
The problem was that server handlers block on done<-,
the goroutine that reads from done blocks on count<-,
and the main goroutine that is supposed to read from count
waits for server handlers to exit.
Fixes#5547.
R=golang-dev, dave, bradfitz
CC=golang-dev
https://golang.org/cl/9722043
This only affects calls where both ReaderFrom and WriterTo are implemented. WriterTo can issue one large write, while ReaderFrom must Read until EOF, potentially reallocating when out of memory. With one large Write, the Writer only needs to allocate once.
This also helps in ioutil.Discard since we can avoid copying memory when the Reader implements WriterTo.
R=golang-dev, dsymonds, remyoudompheng, bradfitz
CC=golang-dev, minux.ma
https://golang.org/cl/9462044
This change contains an implementation of the RSASSA-PSS signature
algorithm described in RFC 3447.
R=agl, agl
CC=gobot, golang-dev, r
https://golang.org/cl/9438043
This CL adds missing IPv6 socket options which are required
to control IPv6 as described in RFC 3493, RFC 3542.
Update #5538
R=golang-dev, dave, iant
CC=golang-dev
https://golang.org/cl/9373046
1) go/doc:
- create correct ast.FuncType
- use more commonly used variable names in a test case
2) make ast.FuncType.Pos robust in case of incorrect ASTs
R=golang-dev
CC=golang-dev
https://golang.org/cl/9651044
If a union contains a pointer, it will mess up the garbage collector, causing memory corruption.
R=golang-dev, dave, nightlyone, adg, dvyukov, bradfitz, minux.ma, r, iant
CC=golang-dev
https://golang.org/cl/8469043
This is needed for preemptive scheduler, because the goroutine
can be preempted at surprising points.
R=golang-dev, iant
CC=golang-dev
https://golang.org/cl/9376043
When cgo is used, runtime creates an additional M to handle callbacks on threads not created by Go.
This effectively disabled deadlock detection, which is a right thing, because Go program can be blocked
and only serve callbacks on external threads.
This also disables deadlock detection under race detector, because it happens to use cgo.
With this change the additional M is created lazily on first cgo call. So deadlock detector
works for programs that import "C", "net" or "net/http/pprof" but do not use them in fact.
Also fixes deadlock detector under race detector.
It should be fine to create the M later, because C code can not call into Go before first cgo call,
because C code does not know when Go initialization has completed. So a Go program need to call into C
first either to create an external thread, or notify a thread created in global ctor that Go
initialization has completed.
Fixes#4973.
Fixes#5475.
R=golang-dev, minux.ma, iant
CC=golang-dev
https://golang.org/cl/9303046
The original code was correct. The count returned must be the length
of the input slice, not the length of the formatted message.
««« original CL description
log/syslog: report errors from Fprintf
Thanks to chiparus for identifying this.
Fixes#5541.
R=golang-dev, iant
CC=golang-dev
https://golang.org/cl/9658043
»»»
R=golang-dev, iant
CC=golang-dev
https://golang.org/cl/9644044
Currently per-sizeclass stats are lost for destroyed MCache's. This patch fixes this.
Also, only update mstats.heap_alloc on heap operations, because that's the only
stat that needs to be promptly updated. Everything else needs to be up-to-date only in ReadMemStats().
R=golang-dev, remyoudompheng, dave, iant
CC=golang-dev
https://golang.org/cl/9207047
The nlistmin/size thresholds are copied from tcmalloc,
but are unnecesary for Go malloc. We do not do explicit
frees into MCache. For sparse cases when we do (mainly hashmap),
simpler logic will do.
R=rsc, dave, iant
CC=gobot, golang-dev, r, remyoudompheng
https://golang.org/cl/9373043
A bufio.Writer.Flush marks the usual end of a Writer's
life. Recycle its internal buffer on those explicit flushes,
but not on normal, as-needed internal flushes.
benchmark old ns/op new ns/op delta
BenchmarkWriterEmpty 1959 727 -62.89%
benchmark old allocs new allocs delta
BenchmarkWriterEmpty 2 1 -50.00%
benchmark old bytes new bytes delta
BenchmarkWriterEmpty 4215 83 -98.03%
R=gri, iant
CC=gobot, golang-dev, voidlogic7
https://golang.org/cl/9459044
This should have been removed in 45c12efb4635. Not a correctness
issue, but unnecessary work.
This CL also adds paranoia checks in removeDep so this doesn't
happen again.
Fixes#5502
R=adg
CC=gobot, golang-dev, google
https://golang.org/cl/9543043
undo CL 8478044 / 0d28fd55e721
Lack of consensus.
««« original CL description
time: add Time.FormatAppend
This is a version of Time.Format that doesn't require allocation.
Fixes#5192
Update #5195
R=r
CC=gobot, golang-dev
https://golang.org/cl/8478044
»»»
R=r
CC=golang-dev
https://golang.org/cl/9462049
This isn't clearly a bug on Go's part, but it triggers a bug in Firefox
which means that crypto/tls and net/http cannot be wired up together
unless NextProtos includes "http/1.1". When net/http sets up the
tls.Config, it does this and so works fine. But anyone setting up the
tls.Config themselves will hit the Firefox bug.
Fixes#5445.
R=golang-dev, bradfitz, r
CC=golang-dev
https://golang.org/cl/9539045
as OpenBSD lacks 4 errno constants, api/go1.txt is updated so that
api check won't fail.
R=golang-dev, iant, bradfitz, r
CC=golang-dev
https://golang.org/cl/9149045
Several places used io.WriteString unnecessarily when the
static type already implemented WriteString. No need to
check for it at runtime.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/9608043
It contains the LHS of the range clause and gets
instrumented by racewalk, but it doesn't have any meaning.
Fixes#5446.
R=golang-dev, dvyukov, daniel.morsing, r
CC=golang-dev
https://golang.org/cl/9560044
Failures caused by errors like invalid signatures or missing hash
functions cause rather generic, unhelpful error messages because no
trust chain can be constructed: "x509: certificate signed by unknown
authority."
With this change, authority errors may contain the reason why an
arbitary candidate step in the chain was rejected. For example, in the
event of a missing hash function the error looks like:
x509: certificate signed by unknown authority (possibly because of
"crypto/x509: cannot verify signature: algorithm unimplemented" while
trying to verify candidate authority certificate 'Thawte SGC CA')
Fixes 5058.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/9104051
Share garbage between different bufio Readers. When a Reader
has zero buffered data, put its buffer into a pool.
This acknowledges that most bufio.Readers eventually get
read to completion, and their buffers are then no longer
needed.
benchmark old ns/op new ns/op delta
BenchmarkReaderEmpty 2993 1058 -64.65%
benchmark old allocs new allocs delta
BenchmarkReaderEmpty 3 2 -33.33%
benchmark old bytes new bytes delta
BenchmarkReaderEmpty 4278 133 -96.89%
Update #5100
R=r
CC=adg, dvyukov, gobot, golang-dev, rogpeppe
https://golang.org/cl/8819049
The stack scanner for not started goroutines ignored the arguments
area when its size was unknown. With this change, the distance
between the stack pointer and the stack base will be used instead.
Fixes#5486
R=golang-dev, bradfitz, iant, dvyukov
CC=golang-dev
https://golang.org/cl/9440043
A test added in b37d2fdcc4d9 didn't work with some values of GOMAXPROCS
because the defer statements were in the wrong order: the Pipe could be
closed before the TLS Client was.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/9187047
If a slice points to an array embedded in a struct,
the whole struct can be incorrectly scanned as the slice buffer.
Fixes#5443.
R=cshapiro, iant, r, cshapiro, minux.ma
CC=bradfitz, gobot, golang-dev
https://golang.org/cl/9372044
Allocs of size 16 can bypass atomic set of the allocated bit, while allocs of size 8 can not.
Allocs with and w/o type info hit different paths inside of malloc.
Current results on linux/amd64:
BenchmarkMalloc8 50000000 43.6 ns/op
BenchmarkMalloc16 50000000 46.7 ns/op
BenchmarkMallocTypeInfo8 50000000 61.3 ns/op
BenchmarkMallocTypeInfo16 50000000 63.5 ns/op
R=golang-dev, remyoudompheng, minux.ma, bradfitz, iant
CC=golang-dev
https://golang.org/cl/9090045
for checking for page boundary. Also avoid boundary check
when >=16 bytes are hashed.
benchmark old ns/op new ns/op delta
BenchmarkHashStringSpeed 23 22 -0.43%
BenchmarkHashBytesSpeed 44 42 -3.61%
BenchmarkHashStringArraySpeed 71 68 -4.05%
R=iant, khr
CC=gobot, golang-dev, google
https://golang.org/cl/9123046
Finer-grained transfers were relevant with per-M caches,
with per-P caches they are not relevant and harmful for performance.
For few small size classes where it makes difference,
it's fine to grab the whole span (4K).
benchmark old ns/op new ns/op delta
BenchmarkMalloc 42 40 -4.45%
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/9374043
The PKCS#1 spec requires that the PS padding in an RSA message be at
least 8 bytes long. We were not previously checking this. This isn't
important in the most common situation (session key encryption), but
the impact is unclear in other cases.
This change enforces the specified minimum size.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/9222045
OpenSSL can be configured to send empty records in order to randomise
the CBC IV. This is an early version of 1/n-1 record splitting (that Go
does) and is quite reasonable, but it results in tls.Conn.Read
returning (0, nil).
This change ignores up to 100 consecutive, empty records to avoid
returning (0, nil) to callers.
Fixes 5309.
R=golang-dev, r, minux.ma
CC=golang-dev
https://golang.org/cl/8852044
This patch resulted from a bit of quick optimisation in response to a
golang-nuts post. It looks like one could save a couple other copies in
this function, but this addresses the inner loop and is fairly simple.
benchmark old ns/op new ns/op delta
BenchmarkGCD10x10 1964 1711 -12.88%
BenchmarkGCD10x100 2019 1736 -14.02%
BenchmarkGCD10x1000 2471 2171 -12.14%
BenchmarkGCD10x10000 6040 5778 -4.34%
BenchmarkGCD10x100000 43204 43025 -0.41%
BenchmarkGCD100x100 11004 8520 -22.57%
BenchmarkGCD100x1000 11820 9446 -20.08%
BenchmarkGCD100x10000 23846 21382 -10.33%
BenchmarkGCD100x100000 133691 131505 -1.64%
BenchmarkGCD1000x1000 120041 95591 -20.37%
BenchmarkGCD1000x10000 136887 113600 -17.01%
BenchmarkGCD1000x100000 295370 273912 -7.26%
BenchmarkGCD10000x10000 2556126 2205198 -13.73%
BenchmarkGCD10000x100000 3159512 2808038 -11.12%
BenchmarkGCD100000x100000 150543094 139986045 -7.01%
R=gri, remyoudompheng
CC=bradfitz, gobot, golang-dev, gri
https://golang.org/cl/9424043
This is needed for preemptive scheduler,
it will preempt only when m->locks==0,
and we do not want to be preempted while
we have not completely unlocked the lock.
R=golang-dev, khr, iant
CC=golang-dev
https://golang.org/cl/9196047
Also change table type from int32[] to int8[] to save space in L1$.
benchmark old ns/op new ns/op delta
BenchmarkMalloc 42 40 -4.68%
R=golang-dev, bradfitz, r
CC=golang-dev
https://golang.org/cl/9199044
Trying to lookup user's display name with directory services can
take several seconds when user's computer is not in a domain.
As a workaround, check if computer is joined in a domain first,
and don't use directory services if it is not.
Additionally, don't leak tokens in user.Current().
Fixes#5298.
R=golang-dev, bradfitz, alex.brainman, lucio.dere
CC=golang-dev
https://golang.org/cl/8541047
The *Encoder is almost always garbage. It doesn't need an
encodeState inside of it (and its bytes.Buffer), since it's
only needed locally inside of Encode.
benchmark old ns/op new ns/op delta
BenchmarkEncoderEncode 2562 2553 -0.35%
benchmark old bytes new bytes delta
BenchmarkEncoderEncode 283 102 -63.96%
R=r
CC=gobot, golang-dev
https://golang.org/cl/9365044
Move the documentation from race.go to doc.go, because
race.go uses +build race, so it's not normally parsed by go doc.
Rephrase the documentation for end users, provide link to race
detector manual.
Fixes#5444.
R=golang-dev, minux.ma, adg, r
CC=golang-dev
https://golang.org/cl/9144050
runtime.park() can access freed select descriptor
due to a racing free in another thread.
See the comment for details.
Slightly modified version of dvyukov's CL 9259045.
No test yet. Before this CL, the test described in issue 5422
would fail about every 40 times for me. With this CL, I ran
the test 5900 times with no failures.
Fixes#5422.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/9311043
The linker can generate split stack prolog when a textflag 7 function
makes an indirect function call. If it happens, badsignal() crashes
trying to dereference g.
Fixes#5337.
R=bradfitz, dave, adg, iant, r, minux.ma
CC=adonovan, golang-dev
https://golang.org/cl/9226043
This must have been from when "error" was a good variable
name for an "os.Error". But we use "err" these days.
R=golang-dev, dsymonds, r
CC=golang-dev
https://golang.org/cl/9132045
Include libc.h before bio.h in 8.c, because bio.h uses
the UTFmax enum, which is declared in libc.h, since
the recent switch to 21-bit runes in Plan 9.
The 5.c and 6.c files already includes libc.h.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/9040047
This is needed for SWIG when linking in internal mode. In
internal mode if a symbol was cgo_import_static we used to
forget that it was also cgo_import_dynamic.
R=rsc, r
CC=golang-dev
https://golang.org/cl/9080043
Manual undo due to later changes in doc/go1.1.html; cmd/go/test.bash still passes.
Rationale, from CL 8119049 review log:
This makes the 'go run' command different from every other command.
For example, 'go test' does not mean 'go test *.go'.
If we were going to handle the no arguments case in 'go run', I would hope that
it would scan the current directory to find a package just like 'go build' or
'go test' would, and then it would require that package to be 'package main',
and then it would run that package. This would make it match 'go test' and 'go
build' and 'go install' and so on. It would mean that if you are working on a
command in a directory that is 'go install'able, then 'go run' will run the
binary for you. The current CL does not accomplish that when build constraints
or file name constraints are involved.
For example, if I am working on a program like:
$ ls
main.go
main_386.s
main_arm.s
main_amd64.s
$
Then 'go run' will fail here because the .s files are ignored.
If instead I am working on a program like:
$ ls
main.go
main_386.go
main_arm.go
main_amd64.go
$
then 'go run' will fail because too many files are included.
I would like to see this command implemented so that it is compatible with the
other go subcommands. Since it is too late to do that for Go 1.1, I would like
to see this CL reverted, to preserve the option to do it better later.
R=golang-dev, iant, r
CC=golang-dev
https://golang.org/cl/8797049
I would like opinions on whether this is a good idea for 1.1.
On the one hand it's a moderately important issue. On the
other hand this introduces at least the possibility of
external linker errors due to the additional relocations and
it may be better to wait.
I'm fairly confident that the behaviour is unchanged when not
using an external linker.
Update #5221
This CL is tested lightly on 386 and amd64 and fixes the cases
I tested. I have not tested it on Darwin or Windows.
R=golang-dev, dave, daniel.morsing, rsc
CC=golang-dev
https://golang.org/cl/8858047
PC-relative needs a signed offset; others need unsigned.
Also fix signedness of 32-bit relocation on Windows.
R=golang-dev, iant
CC=golang-dev
https://golang.org/cl/9039045
Some 64-bit fields were run through 32-bit words, some counts were
not checked for overflow, and relocations must fit in 32 bits.
Tests to follow.
R=golang-dev, dsymonds
CC=golang-dev
https://golang.org/cl/9033043
A few places in the linker pushed 64-bit values through 32-bit holes,
including in relocation.
Clean them up, and check for a few other overflows as well.
Tests to follow.
R=dsymonds
CC=gobot, golang-dev
https://golang.org/cl/9032043
runtime.setmg() calls another function (cgo_save_gm), so it must save
LR onto stack.
Re-enabled TestCthread test in misc/cgo/test.
Fixes#4863.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/9019043
The refcounting of driver Conns was completedly busted and
would leak (be held open forever) with any reasonable
load. This was a significant regression from Go 1.0.
The core of this patch is removing one line:
s.db.addDep(dc, s)
A database conn (dc) is a resource that be re-created any time
(but cached for speed) should not be held open forever with a
dependency refcount just because the Stmt (s) is alive (which
typically last for long periods of time, like forever).
The meat of the patch is new tests. In fixing the real issue,
a lot of tests then failed due to the fakedb_test.go's paranoia
about closing a fakeConn while it has open fakeStmts on it. I
could've ignored that, but that's been a problem in the past for
other bugs.
Instead, I now track per-Conn open statements and close them
when the the conn closes. The proper way to do this would've
been making *driverStmt a finalCloser and using the dep mechanism,
but it was much more invasive. Added a TODO instead.
I'd like to give a way for drivers to opt-out of caring about
driver.Stmt closes before a driver.Conn close, but that's a TODO
for the future, and that TODO is added in this CL.
I know this is very late for Go 1.1, but database/sql is
currently nearly useless without this.
I'd like to believe all these database/sql bugs in the past
release cycle are the result of increased usage, number of
drivers, and good feedback from increasingly-capable Go
developers, and not the result of me sucking. It's also hard
with all the real drivers being out-of-tree, so I'm having to
add more and more hooks to fakedb_test.go to simulate things
which real drivers end up doing.
Fixes#5323
R=golang-dev, snaury, gwenn.kahz, google, r
CC=golang-dev
https://golang.org/cl/8836045
It works on i386, but fails on amd64 and arm.
««« original CL description
runtime: prevent the GC from seeing the content of a frame in runfinq()
Fixes#5348.
R=golang-dev, dvyukov
CC=golang-dev
https://golang.org/cl/8954044
»»»
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/8695051
- clean up the notypes version of the test so it's quiet
- change the package in the buildtag test to avoid confusing godoc
R=golang-dev, minux.ma, bradfitz
CC=golang-dev
https://golang.org/cl/8671049
We have to reset the global lineno variable before
processing each file otherwise line numbers will be
offset by the number of lines in the previous file.
The following examples are from the beginning of the
ztime_linux_amd64.c file which is generated from
time.goc in the runtime package.
Before:
#line 2483 "/home/apm/src/go/src/pkg/runtime/time.goc"
static Timers timers;
static void addtimer ( Timer* ) ;
void
time·Sleep(int64 ns)
{
#line 2492 "/home/apm/src/go/src/pkg/runtime/time.goc"
After:
#line 16 "/home/apm/src/go/src/pkg/runtime/time.goc"
static Timers timers;
static void addtimer ( Timer* ) ;
void
time·Sleep(int64 ns)
{
#line 25 "/home/apm/src/go/src/pkg/runtime/time.goc"
R=golang-dev, minux.ma, iant, r, adg
CC=golang-dev
https://golang.org/cl/8653045
Change the term 'standard time', which already means something,
to 'reference time', and add a couple of sentences and clarifications.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/8799047
Also add a new variable ErrNoProgress that io.Readers can use to
report ineffectual Read calls.
Fixes#5310.
R=golang-dev, dsymonds, bradfitz
CC=golang-dev
https://golang.org/cl/8845043
Late bug fix, but this is arguably a regression from Go 1.0,
since we added this transparent decoding since then. Without
this fix, Go 1.0 users could decode this correctly, but Go 1.1
users would not be able to.
The newly added test is from the RFC itself.
The updated tests had the wrong "want" values before. They
were there to test \r\n vs \n equivalence (which is
unchanged), not leading whitespace.
The skipWhite decoder struct field was added in the battles of
Issue 4771 in revision b3bb265bfecf. It was just a wrong
strategy, from an earlier round of attempts in
https://golang.org/cl/7300092/
Update #4771Fixes#5295
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/8536045
From the issue, which describes it as well as I could:
database/sql assumes that driver.Stmt.Close does not need the
connection.
see database/sql/sql.go:1308:
This puts the Rows' connection back into the idle pool, and
then calls the driver.Stmt.Close method of the Stmt it belongs
to. In the postgresql driver implementation
(https://github.com/lib/pq), Stmt.Close communicates with the
server (on the connection that was just put back into the idle
pool). Most of the time, this causes no problems, but if
another goroutine makes a query at the right (wrong?) time,
chaos results.
In any case, traffic is being sent on "free" connections
shortly after they are freed, leading to race conditions that
kill the driver code.
Fixes#5283
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/8633044
They caused internal compiler errors and they're expensive enough that inlining them doesn't make sense.
Fixes#5259.
R=golang-dev, r, iant, remyoudompheng
CC=golang-dev
https://golang.org/cl/8636043
Debug output from go test -x may contain empty arguments.
This CL quotes arguments if needed. E.g. the output of
go test -x is now
.../6g -o ./_go_.6 -p testmain -complete -D "" -I . -I $WORK ./_testmain.go
which is easier to grasp.
R=golang-dev, bradfitz, minux.ma, r
CC=golang-dev
https://golang.org/cl/8633043
Debug output from go test -x may contain empty arguments.
This CL quotes arguments if needed. E.g. the output of
go test -x is now
.../6g -o ./_go_.6 -p testmain -complete -D "" -I . -I $WORK ./_testmain.go
which is easier to grasp.
R=golang-dev, bradfitz, minux.ma, r
CC=golang-dev
https://golang.org/cl/8633043
This will let us ask people to rebuild the Go system without
precise GC, and then rebuild and retest their program, to see
if precise GC is causing whatever problem they are having.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/8700043
UMTX_OP_WAIT expects that the address points to a uintptr, but
the code in lock_futex.c uses a uint32. UMTX_OP_WAIT_UINT is
just like UMTX_OP_WAIT, but the address points to a uint32.
This almost certainly makes no difference on a little-endian
system, but since the kernel supports it we should do the
right thing. And, who knows, maybe it matters.
R=golang-dev, bradfitz, r, ality
CC=golang-dev
https://golang.org/cl/8699043
This change removes processing of #cgo directives from cmd/cgo,
pushing the onus back on cmd/go to pass all necessary flags.
Fixes#5224. See comments for rationale.
R=golang-dev, iant, r
CC=golang-dev
https://golang.org/cl/8610044
All symbols are currently marked with global scope.
The correct behavior was lost when the symbol table
format was changed.
R=golang-dev, iant, r
CC=golang-dev
https://golang.org/cl/8625043
The String method is called whenever the printing operation wants a string,
not just for %s and %v.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/8638043
If there are no tags, the rules are the same as before.
If there is a tagged field, choose it if there is exactly one
at the top level of all fields.
More tests. The old tests were clearly inadequate, since
they all pass as is. The new tests only work with the new code.
R=golang-dev, iant
CC=golang-dev
https://golang.org/cl/8617044
