Loading completion suggestions can be slow, especially in GOPATH mode
where basically anything can change at any time. As a compromise, cache
everything for 30 seconds. Specifically, after a completion operation
finishes, if the cache is more than 30 seconds old, refresh it
asynchronously. That keeps user-facing latency consistent, without
chewing up CPU when the editor isn't in use. It does mean that if you
walk away for an hour and come back, the first completion may be stale.
In module mode this is relatively benign. The only things the
longer caching affects are the main module and replace targets, and
relevant packages in those will generally be loaded by gopls, so they'll
have full, up-to-date type information regardless.
In GOPATH mode this may be more troublesome, since it affects
everything. In particular, go get -u of a package that isn't imported
yet won't be reflected until the cache period expires. I think that's a
rare enough case not to worry about.
Change-Id: Iaadfd0ff647cda2b1dcdead9254b5492b397e86e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/205163
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Packages that aren't imported in the current file will often have been
used elsewhere, which means that gopls will have their type information
available. Expose loaded packages in the Snapshot, and try to use that
information when possible for unimported packages.
Change-Id: Icb672618a9f9ec31b9796f0c5da56ed3d2b38aa7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/204824
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The metadata was being added to the cache before it was fully computed.
Change-Id: I6931476a715f0383f7739fa4e950dcaa6cbec4fe
Reviewed-on: https://go-review.googlesource.com/c/tools/+/204562
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Some analyses may panic, so we should be careful to recover.
Change-Id: Ie13df07aca1a21f4e6a66648cd4890b6a31966cc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/204817
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
The approach of using ASTs to determine error ranges had more
complications than I anticipated. Revert it for now to go back to the
old user experience, while we consider a better approach.
Change-Id: I5b23f0147c26089330f8a4bbf7b6914ae66cf59a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/204561
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change stops the memory leak from happening. It does not stop the
large number of allocations done by analysis, however, so these still
need to be prevented through correct cancellation.
Change-Id: I1cf7fbf6f85ed413af1f2ea55f91862a6d7f2db7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/204558
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Closing over the checkPackageHandle creates a cycle that forces the
checkPackageHandle not to be garbage collected until the value is
created. If a value is never created, the handle will not be collected.
Change-Id: I0f94557da917330ebe307a0e843b16ca7382e210
Reviewed-on: https://go-review.googlesource.com/c/tools/+/204079
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change encompasses the refactorings needed to correctly implement
CL 204079. The goal of this CL is to make the actual relevant diffs more
clear.
Change-Id: I38acfd436e2380be790910e01b6e37d8280e9100
Reviewed-on: https://go-review.googlesource.com/c/tools/+/204139
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change eliminates the need for the importer struct. We should no
longer need the "seen" map for cycle detection. This is because
go/packages will not return import maps with cycles, and we fail in the
Import function if we see an import we do not recognize.
Change-Id: I06922c74e07eb47ce63b56fa2ac2099e7fc8bd8a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202299
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Also, address minor comments that I ignored from Heschi because I am
obnoxious.
Change-Id: I99dcac38578585af2cdd951dd2b9755732ef945f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/203281
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Now that we are using the memoize package to cache analysis results, we
can use that cache for suggested fixes.
Change-Id: I42905a6fe575f49d38979d53d58ea8ec59210ae0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/203278
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
There is no need to cache the pass on the actionHandle, as it does not
need to be reused and does not live outside the exec function.
Change-Id: I1737271383776b35718df3475b4f888232d57ae4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/203177
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We don't need to worry about a package's errors unless it is the
top-level package. Also fix some fallback logic in the type error range
computation.
Change-Id: Ib26b5e25bd70193ea24ec4a197811eedf69b0e2c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202622
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This change effectively reverts CL 202039. This CL was a mistake, as it
creates a cycle. Snapshots hold CheckPackageHandles, which in turn hold
pkgs.
Change-Id: I944304cb365f0ef98b5e54ea38edea6cece40453
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202740
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
*ast.ArrayTypes are type expressions like "[]foo" or "[2]int". They
show up as standalone types (e.g. "var foo []int") and as part of
composite literals (e.g. "[]int{}"). I made the following
improvements:
- Always expect a type name for array types.
- Add a "type modifier" for array types so completions can be smart
when we know the expected type. For example:
var foo []int
foo = []i<>
we know we want a type name, but we also know the expected type is
"[]int". When evaluating type names such as "int" we turn the type
into a slice type "[]int" to match against the expected type.
- Tweak the AST fixing to add a phantom selector "_" after a naked
"[]" so you can complete directly after the right bracket.
I split out the type name related type inference bits into a separate
typeNameInference struct. It had become confusing and complicated,
especially now that you can have an expected type and expect a type
name at the same time.
Change-Id: I00878532187ee5366ab8d681346532e36fa58e5f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/197438
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change modifies the invalidContent function to take a file change
type. This allows us to eliminate the separate invalidateMetadata
function. The logic of watching changed files is then further pushed
into the caching layer.
Updates golang/go#34218
Change-Id: Id31b3931c45ec408b6e7b4a362e00f9091ba4f70
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201221
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
A continuation of CL 202298, only for analysis errors.
Change-Id: I957d52cef31938ef66be73463e92695a5b56869c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202540
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Since a user's module cache is generally going to be much bigger than
their main module, one would expect that caching just information about
the module cache would be sufficient. It turns out that's not correct.
When we discover something in the module cache, we have to make sure
that a different version of it isn't already in scope. Doing that can
require information about the main module or replace targets, so that
needs to be cached too.
Concretely, when I'm working in x/tools, if a scan discovers a version
of x/tools in the module cache, it should usually ignore that version.
But that might not be true in more complicated cases, especially those
involving nested modules whose boundaries change.
So, cache everything except GOROOT. Since the new data is mutable,
we store it separately from the module cache data so that it can be
discarded easily between runs.
Change-Id: I47364f6c0270fee03af8898fec6c85d1b9c8d780
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202045
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Scan most sources, including GOPATH, the module cache, the main module,
and replace targets as appropriate. Use the cached stdlib instead of
scanning GOROOT.
We heavily cache the contents of the module cache, so performance is
decent. But we have to look at all the modules not in the module cache
too to get the right versions of modules (see
(*ModuleResolver).canonicalize), which currently isn't cached at all,
even just for a single run. That ends up being pretty expensive.
The implementation changes are relatively small; add package name
loading to scan(), cache that result, and allow callers to control what
directories are scanned so that it can skip GOROOT.
I also cleared out most of the stdlib from the unimported completion
test and added a simple external completion to it for safety's sake.
Change-Id: Id50fd4703b1126be35a000fe90719e19c3ab84bf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/199178
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds a source.Error type which is used to collect the error
information that comes out of the loading, parsing, and type checking
stages. We also add specific sources per-error, rather than having them
all be labeled as "LSP".
This change will enable follow-ups that do a better job of extracting
error ranges.
Change-Id: I3fbb5e42d66aa2c5bb1b2f41d1eadfc45f3a749b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202298
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We were caching the package before setting the handle, so a
checkPackageHandle might be in use before it was fully created.
Change-Id: Ic98e7c351cbed5e4caa87098e95ad04d4f54f8df
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202040
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A package really should always be associated with its snapshot rather
than its view. This eliminates some extra parameters in a few utility
functions.
Change-Id: I60f9b7286e0072d3268602f6bd32052a3d2e5559
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202039
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently array and slice literals don't work very well for
completion. When go/parser is not expecting a type, it often turns
array types (e.g. "[]int") into *ast.BadExpr, which messes up
completion because we can't figure out the prefix from *ast.BadExpr,
and *ast.BadExprs don't get type checked.
This change addresses the first problem of not being able to figure
out the prefix. If we see an *ast.BadExpr, we now blindly try to
reparse it as a composite literal by adding on "{}". If we end up with
an *ast.CompositeLit with an *ast.ArrayType "Type", we swap
the *ast.BadExpr for the *ast.ArrayType. This approach is dumb but
simple, and fixes lexical completions in array types.
Change-Id: Ifa42e646bcbf2a30170d73e6dd11982384d40b43
Reviewed-on: https://go-review.googlesource.com/c/tools/+/197437
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
There was a regression where gopls would not type-check any package with
a bad import. This change fixes the regression and adds a test to make
sure it doesn't happen again.
Change-Id: I3acf0917d46e9444c20135559f057f0ecd20e15b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201539
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Recently been noticing errors where we don't have full metadata for a
given package. It seems to me that, since we added the context to the
packages.Config, there have been cases where the context is canceled on
the first load, and then we type-check with incomplete data. I'm still
not sure if allowing go/packages to be canceled is the correct approach.
Change-Id: I6767ce763538bd579458c8f8db07f15c9eec7b4a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201518
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Muir Manders <muir@mnd.rs>
Reviewed-by: Michael Matloob <matloob@golang.org>
This span resulted in misleading information, since it would appear any
time you called the Check function. This function often returns cached
results, so it's not particularly useful.
Change-Id: I26be652a99b906fb2e8703ff9af86fbe2ef5fc5d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201219
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Analyzer names are not guaranteed to be unique.
Change-Id: I4d4cc9fa746cbfbea9926f2cae0eb5dfc41027a5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201217
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This change makes sure that actionHandles are cached within the
snapshot, to minimize the cost of re-computing action handles on each
run of go/analysis.
Change-Id: If6191c5224285eb207aebb997787ea551a47fbaa
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201098
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This change moves to the approach of caching the analysis using the
memoize package. This means that we will do less work, as we no longer
need to recompute results that are unchanged. The cache key for an
analysis is simply the key of the CheckPackageHandle, along with the
name of the analyzer.
Change-Id: I0e589ccf088ff1de5670401b7207ffa77a254ceb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/200817
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Include the context when invoking go/packages.Load so it is
cancelable. Otherwise if the user is manually typing an import or
otherwise messing around with imports, a big queue of potentially very
slow go/packages.Load calls will build up.
Fixesgolang/go#34414.
Change-Id: I80732086b478b908c720739708dd773e81fe2b81
Reviewed-on: https://go-review.googlesource.com/c/tools/+/200058
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This will prevent us from panicking in cases with errors.
Fixesgolang/go#34824
Change-Id: I02c20655f6926ec00c1591a905ff5a107cc44192
Reviewed-on: https://go-review.googlesource.com/c/tools/+/200300
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change includes dependencies in the cache keys for
CheckPackageHandles. This should fix the issue with propagating results
to reverse dependencies.
Updates golang/go#34410
Change-Id: I025b7f0d6b0dcaa89c3461ebd94eadd35de4955f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/198317
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change does not complete the work to handle snapshots correctly,
but it does implement the behavior of re-building the snapshot on each
file invalidation.
It also moves to the approach of caching the FileHandles on the snapshot,
rather than in the goFile object, which is now not necessary.
Finally, this change shifts the logic of metadata invalidation into the
content invalidation step, so there is less logic to decide if we should
re-load a package or not.
Change-Id: I18387c385fb070da4db1302bf97035ce6328b5c3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/197799
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change uses the missing imports detection to return diagnostics and
warning messages to the user.
Updates golang/go#34484
Change-Id: If7bb7e702b8bdbd7e1ad5e26f93acc50d16209b0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/196985
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Race condition: I deleted the code that acquired the mutex when checking
if a file's imports have changed.
Merge conflict: I submitted a change without rebasing and re-running TryBots.
Change-Id: Iae351f2fff893cfd94db79d9f79578d9827a8c21
Reviewed-on: https://go-review.googlesource.com/c/tools/+/197297
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change moves from caching package information the file object to
caching in a map that gets invalidated when content changes.
This simplifies cache invalidation and reduces the number of fields
guarded by the (*goFile).mu lock.
Change-Id: I33fef6e0b18badb97e49052d9d6e3c15047c4b63
Reviewed-on: https://go-review.googlesource.com/c/tools/+/196984
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Instead of relying on the diagnostics cached on the package, use the
diagnostics sent by the code action when computing suggested fixes.
Change-Id: I77f7fd468b34b824c6c5000a51edbe0f8cc6f637
Reviewed-on: https://go-review.googlesource.com/c/tools/+/197097
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Currently, we cache source.CheckPackageHandles for each file and package
that we are aware of, as well as dependencies. This is not necessary,
since the active packages pin their imports in memory.
Change-Id: Ia0101f4d4a2d36d5baeb890af3d7c8baec297847
Reviewed-on: https://go-review.googlesource.com/c/tools/+/196982
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change shifts our approach to make sure that a top-level package
only ever imports "trimmed" packages.
Change-Id: I63c35791ef6efad7dac248a9ff877835f46df9ed
Reviewed-on: https://go-review.googlesource.com/c/tools/+/196523
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This will allow view configuration to modify the set of analyzers being applied, and also allow the main gopls to inject new analyzers
Change-Id: Ic2a76118c3e29b059e19b31bd1fb54b1d9e15e54
Reviewed-on: https://go-review.googlesource.com/c/tools/+/196320
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This changes adds basic support for running `go mod tidy` as a code
action when a user opens a go.mod file. When we have a command
available like `go mod tidy -check`, we will be able to return edits as
part of the codeAction. For now, we execute the command directly.
This change also required a few modifications to our handling of file
kinds so that we could distinguish between a Go file and a go.mod file.
Change-Id: I343079b8886724b67f90a314e45639545a34f21e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/196322
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change encodes an invariant that, a dependency package will only
ever be parsed with trimmed ASTs.
Updates golang/go#34410
Change-Id: I2ceab3672c0bae0b98cec2a8e60b92a0c01a900f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/196537
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We were recursing infinitely in cases like this:
switch true {
case true:
go foo.F<>
}
There were three things that came together to cause this:
1. We recently starting recursively fixing broken go/defer statements.
2. In this case we were failing to swap in the correct ast.Node in for
the *ast.BadStmt because we were only looking
for *ast.BlockStmt (and *ast.CaseStmt has no block).
3. After 2), we weren't returning an error so the fix() code thought
it should recurse.
Fix 2) by using reflection to swap AST nodes in a generic way. Perhaps
a bit overkill in this case, but I happened to have already written
this for an upcoming change, so I just pulled it in to fix this bug.
Fix 3) by returning an error if we fail to swap the AST nodes.
Fixesgolang/go#34353.
Change-Id: I17ff1afd52ae165c0ba9de5820dcec4cb7d756cb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/196137
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
