Add compile time constants for bases 10 and 16 instead of computing the cutoff
value on every invocation of ParseUint by a division.
Reduce usage of slice operations.
amd64:
benchmark old ns/op new ns/op delta
BenchmarkAtoi 44.6 36.0 -19.28%
BenchmarkAtoiNeg 44.2 38.9 -11.99%
BenchmarkAtoi64 72.5 56.7 -21.79%
BenchmarkAtoi64Neg 66.1 58.6 -11.35%
386:
benchmark old ns/op new ns/op delta
BenchmarkAtoi 86.6 73.0 -15.70%
BenchmarkAtoiNeg 86.6 72.3 -16.51%
BenchmarkAtoi64 126 108 -14.29%
BenchmarkAtoi64Neg 126 108 -14.29%
Change-Id: I0a271132120d776c97bb4ed1099793c73e159893
Reviewed-on: https://go-review.googlesource.com/2460
Reviewed-by: Robert Griesemer <gri@golang.org>
run GC in its own background goroutine making the
caller runnable if resources are available. This is
critical in single goroutine applications.
Allow goroutines that allocate a lot to help out
the GC and in doing so throttle their own allocation.
Adjust test so that it only detects that a GC is run
during init calls and not whether the GC is memory
efficient. Memory efficiency work will happen later
in 1.5.
Change-Id: I4306f5e377bb47c69bda1aedba66164f12b20c2b
Reviewed-on: https://go-review.googlesource.com/2349
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This improves the printing of GC times to be both more human-friendly
and to provide enough information for the construction of MMU curves
and other statistics. The new times look like:
GC: #8 72413852ns @143036695895725 pause=622900 maxpause=427037 goroutines=11 gomaxprocs=4
GC: sweep term: 190584ns max=190584 total=275001 procs=4
GC: scan: 260397ns max=260397 total=902666 procs=1
GC: install wb: 5279ns max=5279 total=18642 procs=4
GC: mark: 71530555ns max=71530555 total=186694660 procs=1
GC: mark term: 427037ns max=427037 total=1691184 procs=4
This prints gomaxprocs and the number of procs used in each phase for
the benefit of analyzing mutator utilization during concurrent phases.
This also means the analysis doesn't have to hard-code which phases
are STW.
This prints the absolute start time only for the GC cycle. The other
start times can be derived from the phase durations. This declutters
the view for humans readers and doesn't pose any additional complexity
for machine readers.
This removes the confusing "cycle" terminology. Instead, this places
the phase duration after the phase name and adds a "ns" unit, which
both makes it implicitly clear that this is the duration of that phase
and indicates the units of the times.
This adds a "GC:" prefix to all lines for easier identification.
Finally, this generally cleans up the code as well as the placement of
spaces in the output and adds print locking so the statistics blocks
are never interrupted by other prints.
Change-Id: Ifd056db83ed1b888de7dfa9a8fc5732b01ccc631
Reviewed-on: https://go-review.googlesource.com/2542
Reviewed-by: Rick Hudson <rlh@golang.org>
Edge cases like base 2 and 36 conversions are now covered.
Many tests are mirrored from the itoa tests.
Added more test cases for syntax errors.
Change-Id: Iad8b2fb4854f898c2bfa18cdeb0cb4a758fcfc2e
Reviewed-on: https://go-review.googlesource.com/2463
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
I would like to create new syscalls in src/internal/syscall,
and I prefer not to add new shell scripts for that.
Replacement for CL 136000043.
Change-Id: I840116b5914a2324f516cdb8603c78973d28aeb4
Reviewed-on: https://go-review.googlesource.com/1940
Reviewed-by: Russ Cox <rsc@golang.org>
This test was taking a long time, reduce its zealousness.
Change-Id: Ib824247b84b0039a9ec690f72336bef3738d4c44
Reviewed-on: https://go-review.googlesource.com/2502
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Minux Ma <minux@golang.org>
$GOTESTONLY controls which set of tests gets run. Only "std" is
supported. This should bring the time of plan9 builder down
from 90 minutes to a maybe 10-15 minutes when running on GCE.
(Plan 9 has performance problems when running on GCE, and/or with the
os/exec package)
This is a temporary workaround for one builder. The other Plan 9
builders will continue to do full builds. The plan9 buidler will be
renamed plan9-386-gcepartial or something to indicate it's not running
the 'test/*' directory, or API tests. Go on Plan 9 has bigger problems
for now. This lets us get trybots going sooner including Plan 9,
without waiting 90+ minutes.
Update #9491
Change-Id: Ic505e9169c6b304ed4029b7bdfb77bb5c8fa8daa
Reviewed-on: https://go-review.googlesource.com/2522
Reviewed-by: Rob Pike <r@golang.org>
This isn't the final answer, but it will give us a clue about what's
going on.
Update #9491
Change-Id: I997f6004eb97e86a4a89a8caabaf58cfdf92a8f0
Reviewed-on: https://go-review.googlesource.com/2510
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
SWIG has always returned a typed interface value for a C++ class,
so the interface value will never be nil even if the pointer itself
is NULL. ptr == NULL in C/C++ should be ptr.Swigcptr() == 0 in Go.
Fixes#9514.
Change-Id: I3778b91acf54d2ff22d7427fbf2b6ec9b9ce3b43
Reviewed-on: https://go-review.googlesource.com/2440
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Increasing the timeout prevents the runtime test
to time out on the Plan 9 instances running on GCE.
Update golang/go#9491
Change-Id: Id9c2b0c4e59b103608565168655799b353afcd77
Reviewed-on: https://go-review.googlesource.com/2462
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Now that there's no 6c compiler anymore, there's no need for cgo to
generate C headers that are compatible with it.
Fixes#9528
Change-Id: I43f53869719eb9a6065f1b39f66f060e604cbee0
Reviewed-on: https://go-review.googlesource.com/2482
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The compiler converts 'val, ok = m[key]' to
tmp, ok = <runtime call>
val = *tmp
For lookups of the form '_, ok = m[key]',
the second statement is unnecessary.
By not generating it we save a nil check.
Change-Id: I21346cc195cb3c62e041af8b18770c0940358695
Reviewed-on: https://go-review.googlesource.com/1975
Reviewed-by: Russ Cox <rsc@golang.org>
The equal algorithm used to take the size
equal(p, q *T, size uintptr) bool
With this change, it does not
equal(p, q *T) bool
Similarly for the hash algorithm.
The size is rarely used, as most equal functions know the size
of the thing they are comparing. For instance f32equal already
knows its inputs are 4 bytes in size.
For cases where the size is not known, we allocate a closure
(one for each size needed) that points to an assembly stub that
reads the size out of the closure and calls generic code that
has a size argument.
Reduces the size of the go binary by 0.07%. Performance impact
is not measurable.
Change-Id: I6e00adf3dde7ad2974adbcff0ee91e86d2194fec
Reviewed-on: https://go-review.googlesource.com/2392
Reviewed-by: Russ Cox <rsc@golang.org>
Use a lookup table to find the function which contains a pc. It is
faster than the old binary search. findfunc is used primarily for
stack copying and garbage collection.
benchmark old ns/op new ns/op delta
BenchmarkStackCopy 294746596 255400980 -13.35%
(findfunc is one of several tasks done by stack copy, the findfunc
time itself is about 2.5x faster.)
The lookup table is built at link time. The table grows the binary
size by about 0.5% of the text segment.
We impose a lower limit of 16 bytes on any function, which should not
have much of an impact. (The real constraint required is <=256
functions in every 4096 bytes, but 16 bytes/function is easier to
implement.)
Change-Id: Ic315b7a2c83e1f7203cd2a50e5d21a822e18fdca
Reviewed-on: https://go-review.googlesource.com/2097
Reviewed-by: Russ Cox <rsc@golang.org>
This implements support for calls to and from C in the ppc64 C ABI, as
well as supporting functionality such as an entry point from the
dynamic linker.
Change-Id: I68da6df50d5638cb1a3d3fef773fb412d7bf631a
Reviewed-on: https://go-review.googlesource.com/2009
Reviewed-by: Russ Cox <rsc@golang.org>
Cgo will need this for calls from C to Go and for handling signals
that may occur in C code.
Change-Id: I50cc4caf17cd142bff501e7180a1e27721463ada
Reviewed-on: https://go-review.googlesource.com/2008
Reviewed-by: Russ Cox <rsc@golang.org>
R13 is the C TLS pointer. Once we're calling to and from C code, if
we clobber R13 in our code, sigtramp won't know whether to get the
current g from REGG or from C TLS. The simplest solution is for Go
code to preserve the C TLS pointer. This is equivalent to what other
platforms do, except that on other platforms the TLS pointer is in a
special register.
Change-Id: I076e9cb83fd78843eb68cb07c748c4705c9a4c82
Reviewed-on: https://go-review.googlesource.com/2007
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This implements the ELF relocations and dynamic linking tables
necessary to support internal linking on ppc64. It also marks ppc64le
ELF files as ABI v2; failing to do this doesn't seem to confuse the
loader, but it does confuse libbfd (and hence gdb, objdump, etc).
Change-Id: I559dddf89b39052e1b6288a4dd5e72693b5355e4
Reviewed-on: https://go-review.googlesource.com/2006
Reviewed-by: Russ Cox <rsc@golang.org>
Most ppc64 relocations come in six or more variants where the basic
relocation formula is the same, but which bits of the computed value
are installed where changes. Introduce the concept of "variants" for
internal relocations to support this. Since this applies to
architecture-independent relocation types like R_PCREL, we do this in
relocsym.
Currently there is only an identity variant. A later CL that adds
support for ppc64 ELF relocations will introduce more.
Change-Id: I0c5f0e7dbe5beece79cd24fe36267d37c52f1a0c
Reviewed-on: https://go-review.googlesource.com/2005
Reviewed-by: Russ Cox <rsc@golang.org>
ppc64 has a bunch of these.
Change-Id: I3b93ed2bae378322a8dec036b1681e520b56ff53
Reviewed-on: https://go-review.googlesource.com/2003
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
ppc64 function symbols have both a global entry point and a local
entry point, where the difference is stashed in sym.other. We'll need
this information to generate calls to ELF ABI functions.
Change-Id: Ibe343923f56801de7ebec29946c79690a9ffde57
Reviewed-on: https://go-review.googlesource.com/2002
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Cache 2KB, 4KB, 8KB, and 16KB stacks. Larger stacks
will be allocated directly. There is no point in cacheing
32KB+ stacks as we ask for and return 32KB at a time
from the allocator.
Note that the minimum stack is 8K on windows/64bit and 4K on
windows/32bit and plan9. For these os/arch combinations,
the number of stack orders is less so that we have the same
maximum cached size.
Fixes#9045
Change-Id: Ia4195dd1858fb79fc0e6a91ae29c374d28839e44
Reviewed-on: https://go-review.googlesource.com/2098
Reviewed-by: Russ Cox <rsc@golang.org>
The ones at the end of M and G are just used to compute
their size for use in assembly. Generate the size explicitly.
The one at the end of itab is variable-sized, and at least one.
The ones at the end of interfacetype and uncommontype are not
needed, as the preceding slice references them (the slice was
originally added for use by reflect?).
The one at the end of stackmap is already accessed correctly,
and the runtime never allocates one.
Update #9401
Change-Id: Ia75e3aaee38425f038c506868a17105bd64c712f
Reviewed-on: https://go-review.googlesource.com/2420
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Fold in some startup randomness to make the hash vary across
different runs. This helps prevent attackers from choosing
keys that all map to the same bucket.
Also, reorganize the hash a bit. Move the *m1 multiply to after
the xor of the current hash and the message. For hash quality
it doesn't really matter, but for DDOS resistance it helps a lot
(any processing done to the message before it is merged with the
random seed is useless, as it is easily inverted by an attacker).
Update #9365
Change-Id: Ib19968168e1bbc541d1d28be2701bb83e53f1e24
Reviewed-on: https://go-review.googlesource.com/2344
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The gc toolchain no longer includes a C compiler, so mentions of "6c"
can be removed or replaced by 6g as appropriate. Similarly, some cgo
functions that previously generated C source output no longer need to.
Change-Id: I1ae6b02630cff9eaadeae6f3176c0c7824e8fbe5
Reviewed-on: https://go-review.googlesource.com/2391
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reader.Discard is the complement to Peek. It discards the next n bytes
of input.
We already have Reader.Buffered to see how many bytes of data are
sitting available in memory, and Reader.Peek to get that that buffer
directly. But once you're done with the Peek'd data, you can't get rid
of it, other than Reading it.
Both Read and io.CopyN(ioutil.Discard, bufReader, N) are relatively
slow. People instead resort to multiple blind ReadByte calls, just to
advance the internal b.r variable.
I've wanted this previously, several people have asked for it in the
past on golang-nuts/dev, and somebody just asked me for it again in a
private email. There are a few places in the standard library we'd use
it too.
Change-Id: I85dfad47704a58bd42f6867adbc9e4e1792bc3b0
Reviewed-on: https://go-review.googlesource.com/2260
Reviewed-by: Russ Cox <rsc@golang.org>
This CL only fixes the build, there are two failing tests:
RaceMapBigValAccess1 and RaceMapBigValAccess2
in runtime/race tests. I haven't investigated why yet.
Updates #9516.
Change-Id: If5bd2f0bee1ee45b1977990ab71e2917aada505f
Reviewed-on: https://go-review.googlesource.com/2401
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Use direct binary insertion instead of recursive calls to symMerge
when one of the blocks has only one element.
benchmark old ns/op new ns/op delta
BenchmarkStableString1K 421999 397629 -5.77%
BenchmarkStableInt1K 123422 120592 -2.29%
BenchmarkStableInt64K 9629094 9620200 -0.09%
BenchmarkStable1e2 123089 120209 -2.34%
BenchmarkStable1e4 39505228 36870029 -6.67%
BenchmarkStable1e6 8196612367 7630840157 -6.90%
Change-Id: I49905a909e8595cfa05920ccf9aa00a8f3036110
Reviewed-on: https://go-review.googlesource.com/2219
Reviewed-by: Robert Griesemer <gri@golang.org>
sysReserve doesn't actually reserve the full amount requested on
64-bit systems, because of problems with ulimit. Instead it checks
that it can get the first 64 kB and assumes it can grab the rest as
needed. This doesn't work well with the "let the kernel pick an address"
mode, so don't do that. Pick a high address instead.
Change-Id: I4de143a0e6fdeb467fa6ecf63dcd0c1c1618a31c
Reviewed-on: https://go-review.googlesource.com/2345
Reviewed-by: Rick Hudson <rlh@golang.org>
The line 'mp.schedlink = mnext' has an implicit write barrier call,
which needs a valid g. Move it above the setg(nil).
Change-Id: If3e86c948e856e10032ad89f038bf569659300e0
Reviewed-on: https://go-review.googlesource.com/2347
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
This test is doing pointer graph manipulation from C, and we
cannot support that with concurrent GC. The wbshadow mode
correctly diagnoses missing write barriers.
Disable the test in that mode for now. There is a bigger issue
behind it, namely SWIG, but for now we are focused on making
all.bash pass with wbshadow enabled.
Change-Id: I55891596d4c763e39b74082191d4a5fac7161642
Reviewed-on: https://go-review.googlesource.com/2346
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
There are two methods by which TLS clients signal the renegotiation
extension: either a special cipher suite value or a TLS extension.
It appears that I left debugging code in when I landed support for the
extension because there's a "+ 1" in the switch statement that shouldn't
be there.
The effect of this is very small, but it will break Firefox if
security.ssl.require_safe_negotiation is enabled in about:config.
(Although almost nobody does this.)
This change fixes the original bug and adds a test. Sadly the test is a
little complex because there's no OpenSSL s_client option that mirrors
that behaviour of require_safe_negotiation.
Change-Id: Ia6925c7d9bbc0713e7104228a57d2d61d537c07a
Reviewed-on: https://go-review.googlesource.com/1900
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
SignPSS is documented as allowing opts to be nil, but actually
crashes in that case. This change fixes that.
Change-Id: Ic48ff5f698c010a336e2bf720e0f44be1aecafa0
Reviewed-on: https://go-review.googlesource.com/2330
Reviewed-by: Minux Ma <minux@golang.org>
First, call clearcheckmarks immediately after changing checkmark,
so that there is less time when the checkmark flag and the bitmap
are inconsistent. The tiny gap between the two lines is fine, because
the world is stopped. Before, the gap was much larger and included
such code as "go bgsweep()", which allocated.
Second, modify gcphase only when the world is stopped.
As written, gcscan_m was changing gcphase from 0 to GCscan
and back to 0 while other goroutines were running.
Another goroutine running at the same time might decide to
sleep, see GCscan, call gcphasework, and start "helping" by
scanning its stack. That's fine, except that if gcphase flips back
to 0 as the goroutine calls scanblock, it will start draining the
work buffers prematurely.
Both of these were found wbshadow=2 (and a lot of hard work).
Eventually that will run automatically, but right now it still
doesn't quite work for all.bash, due to mmap conflicts with
pthread-created threads.
Change-Id: I99aa8210cff9c6e7d0a1b62c75be32a23321897b
Reviewed-on: https://go-review.googlesource.com/2340
Reviewed-by: Rick Hudson <rlh@golang.org>
Found with GODEBUG=wbshadow=2 mode.
Eventually that will run automatically, but right now
it still detects other missing write barriers.
Change-Id: I5624b509a36650bce6834cf394b9da163abbf8c0
Reviewed-on: https://go-review.googlesource.com/2310
Reviewed-by: Rick Hudson <rlh@golang.org>
Use typedmemmove, typedslicecopy, and adjust reflect.call
to execute the necessary write barriers.
Found with GODEBUG=wbshadow=2 mode.
Eventually that will run automatically, but right now
it still detects other missing write barriers.
Change-Id: Iec5b5b0c1be5589295e28e5228e37f1a92e07742
Reviewed-on: https://go-review.googlesource.com/2312
Reviewed-by: Keith Randall <khr@golang.org>
