The old code didn't stop after finding the fallthrough target, always
walking the entire list to the top. This would effectively break
fallthroughs, constructing an invalid graph, as the fallthrough target
would never be found.
The fix brings the loop condition in line with all the other
stack-walking loop conditions in the surrounding code, which abort
once the target block has been found.
Alternatively, the entire loop could been omitted, as 'fallthrough'
has to be the last statement in a case body and thus always refers to
the immediate element on the stack. However, since the builder already
handles malformed ASTs as gracefully as possible, it seemed better to
keep the loop and to construct a slightly less wrong graph in the
presence of malformed ASTs.
Before the fix, the following code
func fn(x int) {
for {
switch x {
case 1:
println("case 1")
fallthrough
case 2:
println("case 2")
}
}
}
would result in the following graph. Note the presence of an
undefined.branch block.
.0: # entry
succs: 1
.1: # for.body
x
1
succs: 4 6
.2: # for.done
.3: # switch.done
succs: 1
.4: # switch.body
println("case 1")
succs: 7
.5: # switch.body
println("case 2")
succs: 3
.6: # switch.next
2
succs: 5 9
.7: # undefined.branch
.8: # unreachable.branch
succs: 3
.9: # switch.next
succs: 3
After the fix, this graph is computed instead:
.0: # entry
succs: 1
.1: # for.body
x
1
succs: 4 6
.2: # for.done
.3: # switch.done
succs: 1
.4: # switch.body
println("case 1")
succs: 5
.5: # switch.body
println("case 2")
succs: 3
.6: # switch.next
2
succs: 5 8
.7: # unreachable.branch
succs: 3
.8: # switch.next
succs: 3
Change-Id: I3bb00eddec2a7da02cb929860f4c95cf477c848c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186857
Run-TryBot: Dominik Honnef <dominik@honnef.co>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
A recent change to the go command broke these tests. Mark them as
go/packages incompatible for now, until we have time to fix them.
Updates golang/go#33175
Change-Id: Ib4c594bd032107fb1245bfe18fc80392fbab0730
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186838
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
These are hand written structs that when passed through the standard json
encoder produce output that mathches the json form of the open census protobuf
messages.
This allows us to talk to the agent without any extra dependancies.
Change-Id: I23d617018009520aad3832e0425ed0a53c51fd1f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186678
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Save the packages found when scanning of the module cache.
The computed package may have a different import path due
to replace directives, so this needs to be updated
when the moduleResolver is initialized again.
Change-Id: Ib575fcc59b814ff263b431362df3698839a282f6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186301
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
https://golang.org/issue/33157 explains the issues with overlays. The
gopls tests caught this bug, but the go/packages tests didn't, so modify
the go/packages tests correspondingly.
Change-Id: I8ea8e06e145aa2420655cbe4884e60f36acfad7b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186299
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Also add enough support that using it from within the context of the lsp will
report back to the original client.
Change-Id: I081f157c289642454e9f0476747b2131dcd4e16c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185996
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
A detatched context ends up attributing all background work to the initialize
function.
Change-Id: I81206462752228d5ac81408fb1e3fb86ab36796e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186457
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
I dropped the line that added the stats to the context when merging the recent changes.
Change-Id: I66ab2958b0737360896b40bf30c5ca3c2cebbae5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186300
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds a Logf field to the packages.Config.
Change-Id: I144a9a1e1181585bbe621898c4a3e6a007a38322
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185993
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
The imports ProcessEnv contains cached module and filesystem state. This change
allows gopls to use the same ProcessEnv and resolver across multiple calls to the
internal/imports library.
A ProcessEnv belongs to a view, because the cached module state depends
on the module that is open in the workspace.
Since we do not yet track whether the 'go.mod' file has changed, we
conservatively reset the cached state in the module resolver before
every call to imports.Process.
Change-Id: I27c8e212cb0b477ff425d5ed98a544b27b7d92ee
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184921
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change removes the need for the ast and token fields on the *goFile
object. We switch to using source.ParseGoHandles on the package, which
means that we can easily access both the AST and token via the package,
which is already cached.
Change-Id: I5f78bbe09362f4d95eb15556617bdbd809a7a55d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185878
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We only had the tracing on didChange before this
Change-Id: Iadec8a43d439931bf58925f149a1d32b3ae29c36
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186199
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Noticed this because I was accidentally running these tests with Go
1.11.
Change-Id: Ic35d71bd1da9078b4bde6aa2ed62d54a8b95b0e0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186298
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Suzy Mueller <suzmue@golang.org>
Refactors allpaths to print an adjacency list from "from" to "to", instead of
just the nodes. This allows other tools like modgraphviz to print the subgraph.
For example, the following command:
cd $GOPATH/src/cloud.google.com/go && \
go mod graph | \
digraph allpaths cloud.google.com/go golang.org/x/text@v0.3.2 | \
modgraphviz | \
dot -Tpng -o graph.png
Generates the following graph.png: https://user-images.githubusercontent.com/3584893/60481727-df0a8680-9c4b-11e9-8df9-c581d599edd1.png
Also splits out the allpaths tests into their own test, and adds many test
cases.
This is a breaking change. The previous behavior returned vertices; now it
returns edges. If you relied on the previous behavior, use:
my-application | digraph allpaths <from> <to> | digraph nodes
Change-Id: I2eb7c377f5fe1e1e90c5b74eaa78d5211192bb2a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184337
Reviewed-by: Alan Donovan <adonovan@google.com>
There is a problem with this test failing in module mode only with the
tip of the go tree. Adding this file changes it from a pure overlay package
to one that has an extra file, which fixes it for now.
updates golang/go#33125
Change-Id: I87dae0b44691246a1f79df454afb190f944cc886
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186259
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We recommend that gopls integrators apply the []TextEdit responses in
reverse order to get a correct resulting document. This strategy works
when the response is already sorted. Have gopls return sorted []TextEdit
for each file.
Fixesgolang/go#33123
Change-Id: Ib570881c9623695d2ae3194fa8a97b0a681a3250
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186258
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
And purge the loggers from the view and session.
Change-Id: I262958f340e9a5ac9cc9b3db9e9910381e457478
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185989
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We merge them into a single interface and support multiple of them rather than
just one.
This will allow us to stack handlers with different responsabilities and extract
some core logic (like tracing) out to a handler where it belongs.
Change-Id: I6aab92138550c5062fcb1bed86171e0850d1eb38
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185879
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In internal/lsp/link.go appeared a bug that error message is printed
even if error is not apeared. this commit is fixing this behaviour.
Fixesgolang/go#33087
Change-Id: I932546867d78c5c0c3d2c9dabd13287f6837f458
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186037
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
This change merely modifies session.DidOpen to accept the document's
language ID. It does not actually add any handling of the language ID.
Change-Id: I2582ae307d1ca062f37b4683907cdbcfdfc61809
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184160
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If typeCheck() returned an error, we could get into a state where a
package had an entry in the pcache, but the package's files had an
empty "pkgs" map. When we got a DidChange event for one of the files,
no packages would get invalidated since the file's "pkgs" was
empty. This resulted in the cached typeCheck() error persisting
indefinitely. Fix by never caching pcache entries on error.
An easy way to reproduce the problem was to delete the package name
from a file. For example, edit "package foo" to be just
"package". This caused the package to get stuck with an "AST for %s
has an invalid position" error.
Change-Id: I330bf9e419852dffa0f2dee94b56226367488dd1
GitHub-Last-Rev: 18be7078521b942694c76f799a2d520eee47167d
GitHub-Pull-Request: golang/tools#135
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185839
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
also change the return type to be and end function and not an incomplete span
Change-Id: Icd99d93ac98a0f8088f33e905cf1ee3fe410c024
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185349
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This provides the basic support for aggregating stats into useful metrics,
utilizing tags.
This change also adds the standard rpc metrics for the stats the jsonrpc2 system
is already filling in.
Change-Id: Ibe1b64c4c4c587dacd53112454606634e9f682ce
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185342
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Since 'IdentifierInfo' doesn't contain ast node of import spec,
gopls will construct an empty string under plaintext mode and
'```go\n\n```' under markdown mode for *ast.ImportSpec. For now,
the hovering result of import spec is the corresponding node
format.
Fixesgolang/go#33000
Change-Id: I4c25782ddb5bcc557ace82f46d480316b0b90509
GitHub-Last-Rev: 150728f401c5f9b161b557584ad3250f46e50869
GitHub-Pull-Request: golang/tools#134
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185357
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For all uses inside the lsp we use the detatch logic instead
For tests we build it in the test harness instead
This is in preparation for things on the context becomming important
Change-Id: I7e6910e0d3581b82abbeeb09f9c22a99efb73142
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185677
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
- Move verbose usage docs to godoc, replace usage with terse description of
usage and commands.
- Add copyrights.
- Update usage to more canonical function format instead of const format.
Change-Id: I30d072f391bbf9911798e90efb85cd5351d99205
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184177
Run-TryBot: Alan Donovan <adonovan@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
Support renaming of identifiers in test packages. The packages for
all of the references must be checked and the changes need to be
deduped, since both a package and its test package contain some of the
same files.
Fixesgolang/go#32974
Change-Id: Ie51e19716faae77ce7e5254eeb3956faa42c2a09
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185277
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is the basic library that allows for recording of stats about the program
operation.
Change-Id: I09f7e3de5fc37aaf29bc0db46f15b15056fc0eb2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185338
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This maps more directly to the basic telementery tagging requirements and uses
the context package in a way that is more idomatic.
Change-Id: If08c429b897bddfe014224ac2d92d7796a521ab9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184941
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is used by all the telemetry packages that come next
Change-Id: Ic84d91da2a792b53ee8839aae207ae5767ab17e0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184940
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds documentation to the completion items. This normally
should be done in completionItem/resolve, since it takes more time to
compute documentation. However, I am not sure if that latency incurred
by pre-computing documentation is actually significantly more than the
latency incurred by an extra call to 'completionItem/resolve'. This
needs to be investigated, so we begin by just precomputing all of the
documentation for each item.
Updates golang/go#29151
Change-Id: I148664d271cf3f1d089c1a871901e3ee404ffbe8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184721
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Objects for builtin types all have position token.NoPos. We do
not want all objects that have position token.NoPos to be matched
when we are looking for references for this object, so we need to
compare the names of the objects as well.
Fixesgolang/go#32991
Change-Id: I67e7aba9909ebcbb246203ea5c572debf996c792
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185247
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
