Just go ahead and do it, if something is wrong we'll throw.
Also rip out cc-generated arg ptr maps, they are useless now.
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/133690045
Replacing gosched with Gosched broke some builds because
some of the call sites are at times when the stack cannot be grown.
TBR=khr
CC=golang-codereviews
https://golang.org/cl/142000043
Details: Until now, when we saw a key:value pair that fit onto
a single line, we assumed that it should be formatted with a
vtab after the ':' for alignment of its value. This leads to
odd behavior if there are more than one such pair on a line.
This CL changes the behavior such that alignment is only used
for the first pair on a line. This preserves existing behavior
(in the std lib we have composite literals where the last line
contains multiple entries and the first entry's value is aligned
with the values on previous lines), and resolves this issue.
No impact on formatting of std lib, go.tools, go.exp, go.net.
Fixes#8685.
LGTM=adonovan
R=adonovan
CC=golang-codereviews
https://golang.org/cl/139430043
A write *p = x that needs a write barrier (not all do)
now turns into runtime.writebarrierptr(p, x)
or one of the other variants.
The write barrier implementations are trivial.
The goal here is to emit the calls in the correct places
and to incur the cost of those function calls in the Go 1.4 cycle.
Performance on the Go 1 benchmark suite below.
Remember, the goal is to slow things down (and be correct).
We will look into optimizations in separate CLs, as part of
the process of comparing Go 1.3 against tip in order to make
sure Go 1.4 runs at least as fast as Go 1.3.
benchmark old ns/op new ns/op delta
BenchmarkBinaryTree17 3118336716 3452876110 +10.73%
BenchmarkFannkuch11 3184497677 3211552284 +0.85%
BenchmarkFmtFprintfEmpty 89.9 107 +19.02%
BenchmarkFmtFprintfString 236 287 +21.61%
BenchmarkFmtFprintfInt 246 278 +13.01%
BenchmarkFmtFprintfIntInt 395 458 +15.95%
BenchmarkFmtFprintfPrefixedInt 343 378 +10.20%
BenchmarkFmtFprintfFloat 477 525 +10.06%
BenchmarkFmtManyArgs 1446 1707 +18.05%
BenchmarkGobDecode 14398047 14685958 +2.00%
BenchmarkGobEncode 12557718 12947104 +3.10%
BenchmarkGzip 453462345 472413285 +4.18%
BenchmarkGunzip 114226016 115127398 +0.79%
BenchmarkHTTPClientServer 114689 112122 -2.24%
BenchmarkJSONEncode 24914536 26135942 +4.90%
BenchmarkJSONDecode 86832877 103620289 +19.33%
BenchmarkMandelbrot200 4833452 4898780 +1.35%
BenchmarkGoParse 4317976 4835474 +11.98%
BenchmarkRegexpMatchEasy0_32 150 166 +10.67%
BenchmarkRegexpMatchEasy0_1K 393 402 +2.29%
BenchmarkRegexpMatchEasy1_32 125 142 +13.60%
BenchmarkRegexpMatchEasy1_1K 1010 1236 +22.38%
BenchmarkRegexpMatchMedium_32 232 301 +29.74%
BenchmarkRegexpMatchMedium_1K 76963 102721 +33.47%
BenchmarkRegexpMatchHard_32 3833 5463 +42.53%
BenchmarkRegexpMatchHard_1K 119668 161614 +35.05%
BenchmarkRevcomp 763449047 706768534 -7.42%
BenchmarkTemplate 124954724 134834549 +7.91%
BenchmarkTimeParse 517 511 -1.16%
BenchmarkTimeFormat 501 514 +2.59%
benchmark old MB/s new MB/s speedup
BenchmarkGobDecode 53.31 52.26 0.98x
BenchmarkGobEncode 61.12 59.28 0.97x
BenchmarkGzip 42.79 41.08 0.96x
BenchmarkGunzip 169.88 168.55 0.99x
BenchmarkJSONEncode 77.89 74.25 0.95x
BenchmarkJSONDecode 22.35 18.73 0.84x
BenchmarkGoParse 13.41 11.98 0.89x
BenchmarkRegexpMatchEasy0_32 213.30 191.72 0.90x
BenchmarkRegexpMatchEasy0_1K 2603.92 2542.74 0.98x
BenchmarkRegexpMatchEasy1_32 254.00 224.93 0.89x
BenchmarkRegexpMatchEasy1_1K 1013.53 827.98 0.82x
BenchmarkRegexpMatchMedium_32 4.30 3.31 0.77x
BenchmarkRegexpMatchMedium_1K 13.30 9.97 0.75x
BenchmarkRegexpMatchHard_32 8.35 5.86 0.70x
BenchmarkRegexpMatchHard_1K 8.56 6.34 0.74x
BenchmarkRevcomp 332.92 359.62 1.08x
BenchmarkTemplate 15.53 14.39 0.93x
LGTM=rlh
R=rlh
CC=dvyukov, golang-codereviews, iant, khr, r
https://golang.org/cl/136380043
The uses of onM in dopanic/startpanic are okay even from the signal stack.
Fixes#8666.
LGTM=khr
R=khr
CC=golang-codereviews
https://golang.org/cl/134710043
The previous implementation used per-socket TCP keepalive options
wrong. For example, it used another level socket option to control
TCP and it didn't use TCP_KEEPINTVL option when possible.
Fixes#8683.
Fixes#8701.
Update #8679
LGTM=iant
R=golang-codereviews, iant
CC=golang-codereviews
https://golang.org/cl/136480043
They will both need write barriers at some point.
But until then, no reason why we shouldn't share.
LGTM=rsc
R=golang-codereviews, rsc
CC=golang-codereviews
https://golang.org/cl/141330043
The previous implementation had several subtle issues. It's not
clear if any of these could actually be causing the flakiness
problems on openbsd/386, but fixing them should only help.
1. thrsleep() is implemented internally as unlock, then test *abort
(if abort != nil), then tsleep(). Under the current code, that makes
it theoretically possible that semasleep()/thrsleep() could release
waitsemalock, then a racing semawakeup() could acquire the lock,
increment waitsemacount, and call thrwakeup()/wakeup() before
thrsleep() reaches tsleep(). (In practice, OpenBSD's big kernel lock
seems unlikely to let this actually happen.)
The proper way to avoid this is to pass &waitsemacount as the abort
pointer to thrsleep so thrsleep knows to re-check it before going to
sleep, and to wakeup if it's non-zero. Then we avoid any races.
(I actually suspect openbsd's sema{sleep,wakeup}() could be further
simplified using cas/xadd instead of locks, but I don't want to be
more intrusive than necessary so late in the 1.4 release cycle.)
2. semasleep() takes a relative sleep duration, but thrsleep() needs
an absolute sleep deadline. Instead of recomputing the deadline each
iteration, compute it once up front and use (*Timespec)(nil) to signify
no deadline. Ensures we retry properly if there's a spurious wakeup.
3. Instead of assuming if thrsleep() woke up and waitsemacount wasn't
available that we must have hit the deadline, check that the system
call returned EWOULDBLOCK.
4. Instead of assuming that 64-bit systems are little-endian, compute
timediv() using a temporary int32 nsec and then assign it to tv_nsec.
LGTM=iant
R=jsing, iant
CC=golang-codereviews
https://golang.org/cl/137960043
A race exists between the parent and child processes after a fork.
The child needs to access the new M pointer passed as an argument
but the parent may have already returned and clobbered it.
Previously, we avoided this by saving the necessary data into
registers before the rfork system call but this isn't guaranteed
to work because Plan 9 makes no promises about the register state
after a system call. Only the 386 kernel seems to save them.
For amd64 and arm, this method won't work.
We eliminate the race by allocating stack space for the scheduler
goroutines (g0) in the per-process copy-on-write stack segment and
by only calling rfork on the scheduler stack.
LGTM=aram, 0intro, rsc
R=aram, 0intro, mischief, rsc
CC=golang-codereviews
https://golang.org/cl/110680044
The only thing I can see that is really Plan 9-specific
is that the stack pointer used for signal handling used
to have more mapped memory above it.
Specifically it used to have at most 88 bytes (StackTop),
so change the allocation of a 40-byte frame to a 128-byte frame.
No idea if this will work, but worth a try.
Note that "fix" here means get it back to timing out
instead of crashing.
TBR=iant
CC=golang-codereviews
https://golang.org/cl/142840043
The difference between the old and the new (from earlier) code
is that we set stackguard = stack.lo + StackGuard, while the old
code set stackguard = stack.lo. That 512 bytes appears to be
the difference between the profileloop function running and not running.
We don't know how big the system stack is, but it is likely MUCH bigger than 4k.
Give Go/C 8k.
TBR=iant
CC=golang-codereviews
https://golang.org/cl/140440044
Start the stack a few words below the actual top, so that
if something tries to read goexit's caller PC from the stack,
it won't fault on a bad memory address.
Today, heapdump does that.
Maybe tomorrow, traceback or something else will do that.
Make it not a bug.
TBR=khr
R=khr
CC=golang-codereviews
https://golang.org/cl/136450043
For -mode=atomic, we need to read the counters
using an atomic load to avoid a race. Not worth worrying
about when -mode=atomic is set during generation
of the profile, so we use atomic loads always.
Fixes#8630.
LGTM=rsc
R=dvyukov, rsc
CC=golang-codereviews
https://golang.org/cl/141800043
With new interface allocation rules, the old counts were wrong and
so was the commentary.
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/142760044
Commit to stack copying for stack growth.
We're carrying around a surprising amount of cruft from older schemes.
I am confident that precise stack scans and stack copying are here to stay.
Delete fallback code for when precise stack info is disabled.
Delete fallback code for when copying stacks is disabled.
Delete fallback code for when StackCopyAlways is disabled.
Delete Stktop chain - there is only one stack segment now.
Delete M.moreargp, M.moreargsize, M.moreframesize, M.cret.
Delete G.writenbuf (unrelated, just dead).
Delete runtime.lessstack, runtime.oldstack.
Delete many amd64 morestack variants.
Delete initialization of morestack frame/arg sizes (shortens split prologue!).
Replace G's stackguard/stackbase/stack0/stacksize/
syscallstack/syscallguard/forkstackguard with simple stack
bounds (lo, hi).
Update liblink, runtime/cgo for adjustments to G.
LGTM=khr
R=khr, bradfitz
CC=golang-codereviews, iant, r
https://golang.org/cl/137410043
I have found better approach, then longer wait.
See CL 134360043 for details.
««« original CL description
runtime/pprof: adjust cpuHogger so that tests pass on windows builders
LGTM=rsc
R=dvyukov, rsc
CC=golang-codereviews
https://golang.org/cl/140110043
»»»
LGTM=dave
R=golang-codereviews, dave, dvyukov
CC=golang-codereviews
https://golang.org/cl/133500043
I assumed they were the same when I wrote
cgocallback.go earlier today. Merge them
to eliminate confusion.
I can't tell what gomallocgc did before with
a nil type but without FlagNoScan.
I created a call like that in cgocallback.go
this morning, translating from a C file.
It was supposed to do what the C version did,
namely treat the block conservatively.
Now it will.
LGTM=khr
R=khr
CC=golang-codereviews
https://golang.org/cl/141810043
It already is updating parts of them; we're just getting lucky
retraversing them and not finding much to do.
Change argp to a pointer so that it will be updated too.
Existing tests break if you apply the change to adjustpanics
without also updating the type of argp.
LGTM=khr
R=khr
CC=golang-codereviews
https://golang.org/cl/139380043
It worked at CL 134660043 on the builders,
so I believe it will stick this time.
LGTM=bradfitz
R=khr, bradfitz
CC=golang-codereviews
https://golang.org/cl/141280043
Inside a control clause (if ... {}), composite
literals starting with a type name must be parenthesized.
A composite literal used in the array length expression
of an array composite literal is already parenthesized.
Not a valid program, but syntactically is should
be accepted.
LGTM=adonovan
R=adonovan
CC=golang-codereviews
https://golang.org/cl/142760043
This should make deferreturn nosplit all the way down,
which should fix the current windows/amd64 failure.
If not, I will change StackCopyAlways back to 0.
TBR=khr
CC=golang-codereviews
https://golang.org/cl/135600043
Let's see how close we are to this being ready.
Will roll back if it breaks any builds in non-trivial ways.
LGTM=r, khr
R=iant, khr, r
CC=golang-codereviews
https://golang.org/cl/138200043
Given:
p := alloc()
fn_taking_ptr(p)
p is NOT recorded as live at the call to fn_taking_ptr:
it's not needed by the code following the call.
p was passed to fn_taking_ptr, and fn_taking_ptr must keep
it alive as long as it needs it.
In practice, fn_taking_ptr will keep its own arguments live
for as long as the function is executing.
But if instead you have:
p := alloc()
i := uintptr(unsafe.Pointer(p))
fn_taking_int(i)
p is STILL NOT recorded as live at the call to fn_taking_int:
it's not needed by the code following the call.
fn_taking_int is responsible for keeping its own arguments
live, but fn_taking_int is written to take an integer, so even
though fn_taking_int does keep its argument live, that argument
does not keep the allocated memory live, because the garbage
collector does not dereference integers.
The shorter form:
p := alloc()
fn_taking_int(uintptr(unsafe.Pointer(p)))
and the even shorter form:
fn_taking_int(uintptr(unsafe.Pointer(alloc())))
are both the same as the 3-line form above.
syscall.Syscall is like fn_taking_int: it is written to take a list
of integers, and yet those integers are sometimes pointers.
If there is no other copy of those pointers being kept live,
the memory they point at may be garbage collected during
the call to syscall.Syscall.
This is happening on Solaris: for whatever reason, the timing
is such that the garbage collector manages to free the string
argument to the open(2) system call before the system call
has been invoked.
Change the system call wrappers to insert explicit references
that will keep the allocations alive in the original frame
(and therefore preserve the memory) until after syscall.Syscall
has returned.
Should fix Solaris flakiness.
This is not a problem for cgo, because cgo wrappers have
correctly typed arguments.
LGTM=iant, khr, aram, rlh
R=iant, khr, bradfitz, aram, rlh
CC=dvyukov, golang-codereviews, r
https://golang.org/cl/139360044
The sighander has been run at the bottom of the
currently executing goroutine stack, but it's in C,
and we don't want C on our ordinary goroutine stacks.
Worse, it does a lot of stuff, and it might need more
stack space. There is scary code in traceback_windows.go
that talks about stack splits during sighandler.
Moving sighandler to g0 will eliminate the possibility
of stack splits and such, and then we can delete
traceback_windows.go entirely. Win win.
On the builder, all.bat passes with GOARCH=amd64
and all.bat gets most of the way with GOARCH=386
except for a DLL-loading test that I think is unrelated.
Fixes windows build.
TBR=brainman, iant
CC=golang-codereviews
https://golang.org/cl/140380043
This CL contains compiler+runtime changes that detect C code
running on Go (not g0, not gsignal) stacks, and it contains
corrections for what it detected.
The detection works by changing the C prologue to use a different
stack guard word in the G than Go prologue does. On the g0 and
gsignal stacks, that stack guard word is set to the usual
stack guard value. But on ordinary Go stacks, that stack
guard word is set to ^0, which will make any stack split
check fail. The C prologue then calls morestackc instead
of morestack, and morestackc aborts the program with
a message about running C code on a Go stack.
This check catches all C code running on the Go stack
except NOSPLIT code. The NOSPLIT code is allowed,
so the check is complete. Since it is a dynamic check,
the code must execute to be caught. But unlike the static
checks we've been using in cmd/ld, the dynamic check
works with function pointers and other indirect calls.
For example it caught sigpanic being pushed onto Go
stacks in the signal handlers.
Fixes#8667.
LGTM=khr, iant
R=golang-codereviews, khr, iant
CC=golang-codereviews, r
https://golang.org/cl/133700043
Fixes warning
# _/home/dfc/go/misc/cgo/test/backdoor
/home/dfc/go/src/cmd/cc/bv.c:43:11: runtime error: left shift of 1 by 31 places cannot be represented in type 'int'
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/136330043
