On AIX when external linking, for some symbols we need to add
dummy references to prevent the external linker from discarding
them. Currently we add the reference unconditionally. But if the
symbol doesn't exist, the linking fails in a later stage for
generating external relocation of a nonexistent symbol. The
symbols are special symbols that almost always exist, except that
go:buildid may not exist if the linker is invoked without the
-buildid flag. The go command invokes the linker with the flag, so
this can only happen with manual linker invocation. Specifically,
test/run.go does this in some cases.
Fix this by checking the symbol existence before adding the
reference. Re-enable tests on AIX.
Perhaps the linker should always emit a dummy buildid even if the
flag is not set...
Fixes#54814.
Change-Id: I43d81587151595309e189e38960cbda9a1c5ca32
Reviewed-on: https://go-review.googlesource.com/c/go/+/427620
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
So it won't be visible outside of runtime package. There are changes to
make tests happy:
- For test/directive*.go files, using "go:noinline" for testing misplaced
directives instead.
- Restrict test/fixedbugs/bug515.go for gccgo only.
- For test/notinheap{2,3}.go, using runtime/cgo.Incomplete for marking
the type as not-in-heap. Though it's somewhat clumsy, it's the easiest
way to keep the test errors for not-in-heap types until we can cleanup
further.
- test/typeparam/mdempsky/11.go is about defined type in user code marked
as go:notinheap, which can't happen after this CL, though.
Fixes#46731
Change-Id: I869f5b2230c8a2a363feeec042e7723bbc416e8e
Reviewed-on: https://go-review.googlesource.com/c/go/+/421882
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Joedian Reid <joedian@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Follow-up on comment in CL 427154.
Change-Id: Ib44a8e9b9129d68b794f91788c9b8c971d6c5436
Reviewed-on: https://go-review.googlesource.com/c/go/+/427774
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
This CL moves the directories check, examples, fixedbugs, and spec
from inside go/types/testdata to internal/types/testdata. Except
for the directory adjustments to check_test.go files, this is a
pure file move.
With this CL, both type checkers now share identical tests in an
independent location.
Fixes#54511.
Change-Id: Ib335692d927e93867a158b338f105c2b87e74dbe
Reviewed-on: https://go-review.googlesource.com/c/go/+/427674
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
CL 425735 consolidated the testdata/check/shifts.go files between
go/types and types2. Because some shifts don't work correctly with
types2, the corresponding tests were disabled in the shared file.
Make sure we keep testing those shifts for go/types by adding a
local test file.
For #52080.
For #54511.
Change-Id: I53507e535bf83b204eaf18fc6c2efefcebf5ebf7
Reviewed-on: https://go-review.googlesource.com/c/go/+/426661
Reviewed-by: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Establish testdata/local directory for tests that are not (yet)
shared between the go/types and types2. Move issue47996.go into
that directory.
For #54511.
Change-Id: I274b119990a93cc3657bdddc5246948699226c21
Reviewed-on: https://go-review.googlesource.com/c/go/+/426660
Reviewed-by: Robert Findley <rfindley@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Since the fixedbugs tests are now identical between the two type checkers,
remove the local copy of the fixedbugs tests and (for now) use the tests
in go/types/testdata/fixedbugs instead. Eventually we may decide to move
all tests out of the type checker directories and place them in a
shared space (e.g. internal/types/testdata).
For #54511.
Change-Id: I451c20c784710c36fa50b1d24ac97af554c572af
Reviewed-on: https://go-review.googlesource.com/c/go/+/426658
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Use the go/types version of testdata/fixedbugs tests where diffs
are only in the error positions (the types2 test harness allows
for some position tolerance). Consolidate files where there are
other minor differences.
Add files to respective directories if they only existed for
one of the type checkers.
Move types2-only test issue47996.go out of testdata/fixedbugs
into testdata. Making it work for both type checkers requires
some more work.
With this CL, the testdata/fixedbugs files are identical between
the two type checkers.
For #54511.
Change-Id: I0d67f0db75ad1743c62da9181a6d0032c8bdb728
Reviewed-on: https://go-review.googlesource.com/c/go/+/427236
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Report a syntax error if the first element of a type instance is
not actually a type (but some other expression), rather then relying
on the type checker error in this case. This matches the behavior of
go/parser. Adjust the corresponding types2 test case.
For #54511.
Change-Id: Ia82b3a7d444738c56955ce6c15609470b3431fd1
Reviewed-on: https://go-review.googlesource.com/c/go/+/426657
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Rename .../issue46404.go1 to .../issue46404.go so that it is
not skipped anymore when running tests, and copy for types2.
Disable the code for now due to a difference in error
reporting due to the slightly different handling of index
expressions. This allows us to make progress with test
consolidation.
For #54511.
Change-Id: Ib5c9ffa49b1b24ec680ddb5001bc3dcb1df7eb1f
Reviewed-on: https://go-review.googlesource.com/c/go/+/426656
Run-TryBot: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
This is a port of CL 427156 from the syntax package's parser
to go/parser.
While at it, remove an unused token.Pos parameter from
parseSpecFunction and dependent declarations.
Also, consolidate the respective test file.
For #54511.
Change-Id: Id6a28eb3d23a46fa5fa1d85d2c4e634b7015513c
Reviewed-on: https://go-review.googlesource.com/c/go/+/427157
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
This results in better error recovery and allows us to use the
same tests for go/types and types2.
For #54511.
Change-Id: Ic11a9dafb8c62e0cb952b3924d55a28b438241c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/427154
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
This matches the majority use case as well as types2.
For #54511.
Change-Id: If800afc35db8d32cca8329ed9d6a80b4a15c4878
Reviewed-on: https://go-review.googlesource.com/c/go/+/426477
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Permissible now because go1.17 is used for bootstrapping.
Change-Id: Ic97b0706190c3eb907da69003bc94448c90e5af7
Reviewed-on: https://go-review.googlesource.com/c/go/+/427556
Run-TryBot: Robert Griesemer <gri@google.com>
Run-TryBot: hopehook <hopehook@golangcn.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Permissible now because go1.17 is used for bootstrapping.
Change-Id: Ia6f314f9314eda1cc42002dcbdfa551196df76f0
Reviewed-on: https://go-review.googlesource.com/c/go/+/427554
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: hopehook <hopehook@golangcn.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Instead of checking at parse-time that the LHS of a short variable
declaration contains only identifiers, leave the check to the the
type checker which tests this already.
This removes a duplicate error and matches the behavior of the
syntax package.
For #54511.
Change-Id: I4c68f2bd8a0e015133685f9308beb98e714a83fc
Reviewed-on: https://go-review.googlesource.com/c/go/+/426476
Run-TryBot: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Logic matches the code in the syntax package.
This error was missing from go/parser and go/types.
Added some tests.
For #54511.
Change-Id: I418de4bd4c7169457b424366caae70227a92a761
Reviewed-on: https://go-review.googlesource.com/c/go/+/425795
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Alan Donovan <adonovan@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
The syntax for go and defer specifies an arbitrary expression, not
a call; the call requirement is spelled out in prose. Don't to the
call check in the parser; instead move it to the type checker. This
is simpler and also allows the type checker to check expressions that
are not calls, and avoid "not used" errors due to such expressions.
We would like to make the same change in go/parser and go/types
but the change requires Go/DeferStmt nodes to hold an ast.Expr
rather than an *ast.CallExpr. We cannot change that for backward-
compatibility reasons. Since we don't test this behavior for the
type checkers alone (only for the compiler), we get away with it
for now.
Follow-up on CL 425675 which introduced the extra errors in the
first place.
Change-Id: I90890b3079d249bdeeb76d5673246ba44bec1a7b
Reviewed-on: https://go-review.googlesource.com/c/go/+/425794
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Alan Donovan <adonovan@google.com>
Since the check tests are now identical between the two type checkers,
remove the local copy of the check tests and (for now) use the tests
in go/types/testdata/check instead. Eventually we may decide to move
all tests out of the type checker directories and place them in a
shared space (e.g. internal/types/testdata).
For #54511.
Change-Id: Id3a97593f6c705c5eda4566089ddc7aeb7b47337
Reviewed-on: https://go-review.googlesource.com/c/go/+/425736
Reviewed-by: Alan Donovan <adonovan@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Use the go/types version of testdata/check tests where the diffs
are only in the error positions (the types2 test harness allows
for some position tolerance). Consolidate files where there are
other minor differences.
Comment out a couple of tests that are different between the two
type checkers.
With this CL, the testdata/check files are identical between the
two type checkers.
For #54511.
Change-Id: Ibdff2ca3ec9bdaca3aa84029a7883bb83d2d2060
Reviewed-on: https://go-review.googlesource.com/c/go/+/425735
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Alan Donovan <adonovan@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
- Use "expected X" rather then "expecting X".
- Report a better error when a type argument list is expected.
- Adjust various tests.
For #54511.
Change-Id: I0c5ca66ecbbdcae1a8f67377682aae6b0b6ab89a
Reviewed-on: https://go-review.googlesource.com/c/go/+/425734
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
If the go/defer syntax is bad, using a fake CallExpr may produce
a follow-on error in the type checker. Instead store a BadExpr
in the syntax tree (since an error has already been reported).
Adjust various tests.
For #54511.
Change-Id: Ib2d25f8eab7d5745275188d83d11620cad6ef47c
Reviewed-on: https://go-review.googlesource.com/c/go/+/425675
Reviewed-by: Alan Donovan <adonovan@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Remove the code that verifies that an expression is a type or non-type
expression. For one, it cannot be done perfectly accurate
(e.g., consider *p which could be an indirection or a pointer type),
it also unnecessarily slows down parsing. It's simpler to leave the
verification to the type checker which has all the information needed.
Remove short compiler tests that tested the expression/type property.
Adjust a couple of go/types tests which now trigger because the parser
doesn't complain anymore.
Change file for benchmark from "parser.go" to "../printer/nodes.go"
to avoid a moving target when benchmarking.
The parser may be marginally faster when tested on nodes.go:
name old time/op new time/op delta
ParseOnly-12 1.35ms ± 0% 1.31ms ± 0% ~ (p=0.100 n=3+3)
name old speed new speed delta
ParseOnly-12 39.9MB/s ± 0% 41.0MB/s ± 0% ~ (p=0.100 n=3+3)
For #54511.
Change-Id: I9a32c24c2c6e843c3d1af4587651c352f378b490
Reviewed-on: https://go-review.googlesource.com/c/go/+/425716
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Linux kernel 5.8 added the faccessat2 syscall taking a flags argument.
Attempt to use it in Faccessat and fall back to the existing
implementation mimicking glibc faccessat.
Do not export the new syscall value so we keep syscall API intact.
Part of this commit is generated by:
GOOS=linux ./mkall.sh -syscalls zsyscall_linux_*.go
This is similar to [1] amended by [2]. Required for [3].
[1] https://go-review.googlesource.com/c/sys/+/246537
[2] https://go-review.googlesource.com/c/sys/+/246817
[3] https://go-review.googlesource.com/c/go/+/414824
Co-authored-by: Tobias Klauser <tklauser@distanz.ch>
Change-Id: Ib7fe5ba853c15d92e869df9a16b56b79b96e43a6
Reviewed-on: https://go-review.googlesource.com/c/go/+/416115
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Amend the "mkall.sh -syscalls" implementation to
- prepend ./ before mksyscalls.pl;
- accept the optional file list argument.
This is a preparation for CL 416115.
Change-Id: Ib4dc2b4aa0d2dd22a256414864e92f2d2fd957a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/423676
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Instead of passing the original length and the new length, pass
the new length and the length increment. Also use the new length
in all the post-growslice calculations so that the original length
is dead and does not need to be spilled/restored around the growslice.
old: growslice(typ, oldPtr, oldLen, oldCap, newLen) (newPtr, newLen, newCap)
new: growslice(oldPtr, newLen, oldCap, inc, typ) (newPtr, newLen, newCap)
where inc = # of elements added = newLen-oldLen
Also move the element type to the end of the call. This makes register
allocation more efficient, as oldPtr and newPtr can often be in the
same register (e.g. AX on amd64) and thus the phi takes no instructions.
Makes the go binary 0.3% smaller.
Change-Id: I7295a60227dbbeecec2bf039eeef2950a72df760
Reviewed-on: https://go-review.googlesource.com/c/go/+/418554
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Since when go1.17 is now used for bootstraping.
Change-Id: If28338fc82e6c61f057d7eb3a4c2ed77846167df
Reviewed-on: https://go-review.googlesource.com/c/go/+/427558
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: hopehook <hopehook@golangcn.org>
Since when go1.17 is now used for bootstraping.
Change-Id: I5f763dec1cb152f94ab1c677d3fa26da17abf097
Reviewed-on: https://go-review.googlesource.com/c/go/+/427557
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
Run-TryBot: hopehook <hopehook@golangcn.org>
Reviewed-by: Keith Randall <khr@google.com>
Since when go1.17 is now used for bootstraping.
Change-Id: I5ee65aff72500a04e243238cffeae92ea659627b
Reviewed-on: https://go-review.googlesource.com/c/go/+/427555
Auto-Submit: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: hopehook <hopehook@golangcn.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
These rules should belong to lowering rules not optimizations.
Change-Id: I964d2c4b1d9bef0ede572978aff01cb11bf050ac
Reviewed-on: https://go-review.googlesource.com/c/go/+/426197
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
We have supported passing lists of arguments to the compiler and linker
for some time, since https://go.dev/issue/18468 was fixed.
The reason behind it is that some systems like Windows have relatively
small limits for commands, and some Go packages contain many source files.
This wasn't done for other Go toolchain programs like cgo and asm,
as there wasn't an initial need for it. A TODO was left for them.
The need has now arisen in the form of a bug report for a build of a
large Go package involving cgo.
Do asm as well, which could be triggered by lots of asm files.
I rebuilt Go itself with some basic logging to tell if any other
commands were being run with moderately large command lengths.
I only found one other: gcc being invoked with 300-500 bytes.
I didn't spot any length close to 1KiB, and we can't safely assume that
a user's CC compiler supports these "response files", so leave that as
another TODO for the future. Just like cgo and asm, we can revisit this
if any user reports a bug on the issue tracker.
Fixes#47235.
Change-Id: Ifcc099d7c0dfac3ed2c4e9e7a2d6e3d69b0ccb63
Reviewed-on: https://go-review.googlesource.com/c/go/+/427015
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Keith Randall <khr@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Since when go/types,types2 do not know about build constraints, and
runtime/cgo.Incomplete is only available on platforms that support cgo.
These tests are also failing on aix with failure from linker, so disable
them on aix to make builder green. The fix for aix is tracked in #54814
Updates #46731
Updates #54814
Change-Id: I5d6f6e29a8196efc6c457ea64525350fc6b20309
Reviewed-on: https://go-review.googlesource.com/c/go/+/427394
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
v.SetIterXXX(i) is semantically identical to v.Set(i.XXX()).
If the latter panics for unexported values, so should the former.
This change may breaking some programs, but the change is justified
under the "Go 1 and the Future of Go Programs" document because
the "library has a bug that violates the specification".
In this case, the "reflect" package does not accurately match
the behavior of the Go language specification.
Also, this API was recently released, so the number of users
who could be depending on this behavior is hopefully lower.
Fixes#54628
Change-Id: If86ede51f286e38093f6697944c089f616525115
Reviewed-on: https://go-review.googlesource.com/c/go/+/425184
Auto-Submit: Joseph Tsai <joetsai@digital-static.net>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Joseph Tsai <joetsai@digital-static.net>
Reviewed-by: David Chase <drchase@google.com>
Same as CL 421880, but for test directory.
Updates #46731
Change-Id: If8d18df013a6833adcbd40acc1a721bbc23ca6b2
Reviewed-on: https://go-review.googlesource.com/c/go/+/421881
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
After running the types2 type checker, walk info.Instances to reject
any not-in-heap type arguments. This is feasible to check using the
types2 API now, thanks to #46731.
Fixes#54765.
Change-Id: Idd2acc124d102d5a76f128f13c21a6e593b6790b
Reviewed-on: https://go-review.googlesource.com/c/go/+/427235
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
In go.dev/cl/419674 I added a mechanism to the inliner to allow
inlining to fail gracefully when a function body is missing, but I
missed we already have a mechanism for that: typecheck.HaveInlineBody.
This CL makes it overridable so that unified IR can plug in its
appropriate logic, like it does with the logic for building the
ir.InlinedCallExpr node.
While here, rename inline.NewInline to inline.InlineCall, because the
name "NewInline" is now a misnomer since we initialize it to oldInline
(now named oldInlineCall).
Change-Id: I4e65618d3725919f69e6f43cf409699d20fb797c
Reviewed-on: https://go-review.googlesource.com/c/go/+/427234
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Rotating by c, then by d, is the same as rotating by c+d.
Change-Id: I36df82261460ff80f7c6d39bcdf0e840cef1c91a
Reviewed-on: https://go-review.googlesource.com/c/go/+/424894
Reviewed-by: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Ruinan Sun <Ruinan.Sun@arm.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The current mknode has a few problems:
1) It tends not to run successfully if the tree is in a broken state.
2) It requires that it be run by the go tool in the tree (somewhat related to 1)
3) It requires setting GOROOT
4) It imports code outside the tree (x/packages)
This makes mknode.go very fragile. In particular, I've spent lots of
time fighting mknode when adding or removing code, related to 1.
Rewrite to just use go/ast and friends. No typechecking, no importing,
etc. It can run with any go version, it doesn't need to be the one
corresponding to the code in which it is run. (e.g. you can use go
1.16 to run mknode). It will work as long as the ir package is parseable.
When run, it generates identical output to the old mknode.
Fixes#53959
Change-Id: I5ce0b55572ebcd2fcd11af57a5f29bbf9fa4ed33
Reviewed-on: https://go-review.googlesource.com/c/go/+/418375
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Currently we use a full cmpstring to do the comparison for each
split in the binary search for a string switch.
Instead, split by comparing a single byte of the input string with a
constant. That will give us a much faster split (although it might be
not quite as good a split).
Fixes#53333
R=go1.20
Change-Id: I28c7209342314f367071e4aa1f2beb6ec9ff7123
Reviewed-on: https://go-review.googlesource.com/c/go/+/414894
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
for i := 0; i < 9; i += 3
Currently we compute bounds of [0,8]. Really we know that it is [0,6].
CL 415874 computed the better bound as part of overflow detection.
This CL just incorporates that better info to the prove pass.
R=go1.20
Change-Id: Ife82cc415321f6652c2b5d132a40ec23e3385766
Reviewed-on: https://go-review.googlesource.com/c/go/+/415937
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
