This test was designed for #15609 and didn't consider nacl. It's not
worth adding new +build-guarded assembly files in issue15609.dir for
nacl, especially as nacl is going away.
Fixes#32206
Change-Id: Ic5bd48b4f790a1f7019100b8a72d4688df75512f
Reviewed-on: https://go-review.googlesource.com/c/go/+/178698
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Float formatting uses a multiprecision fallback path where Grisu3
algorithm fails. This has a bug during the rounding phase: the
difference between the decimal value and the upper bound is examined
byte-by-byte and doesn't properly handle the case where the first
divergence has a difference of 1.
For instance (using an example from #29491), for the number
498484681984085570, roundShortest examines the three decimal values:
lower: 498484681984085536
d: 498484681984085568
upper: 498484681984085600
After examining the 16th digit, we know that rounding d up will fall
within the bounds unless all remaining digits of d are 9 and all
remaining digits of upper are 0:
d: ...855xx
upper: ...856xx
However, the loop forgets that d and upper have already diverged and
then on the next iteration sees that the 17th digit of d is actually
lower than the 17th digit of upper and decides that we still can't round
up:
d: ...8556x
upper: ...8560x
Thus the original value is incorrectly rounded down to
498484681984085560 instead of the closer (and equally short)
498484681984085570.
Thanks to Brian Kessler for diagnosing this bug.
Fix it by remembering when we've seen divergence in previous digits.
This CL also fixes another bug in the same loop: for some inputs, the
decimal value d or the lower bound may have fewer digits than the upper
bound, yet the iteration through the digits starts at i=0 for each of
them. For instance, given the float64 value 1e23, we have
d: 99999999999999991611392
upper: 100000000000000000000000
but the loop starts by comparing '9' to '1' rather than '0' to '1'.
I haven't found any cases where this second bug causes incorrect output
because when the digit comparison fails on the first loop iteration the
upper bound always has more nonzero digits (i.e., the expression
'i+1 < upper.nd' is always true).
Fixes#29491
Change-Id: I58856a7a2e47935ec2f233d9f717ef15c78bb2d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/157697
Run-TryBot: Caleb Spare <cespare@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rémy Oudompheng <remyoudompheng@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL changes the default module download and module verification mechanisms
to use the Go module mirror and Go checksum database run by Google.
See https://proxy.golang.org/privacy for the services' privacy policy.
(Today, that URL is a redirect to Google's standard privacy policy,
which covers these services as well. If we publish a more specific
privacy policy just for these services, that URL will be updated to
display or redirect to it.)
See 'go help modules' and 'go help modules-auth' for details (added in this CL).
To disable the mirror and checksum database for non-public modules:
go env -w GONOPROXY=*.private.net,your.com/*
go env -w GONOSUMDB=*.private.net,your.com/*
(If you are using a private module proxy then you'd only do the second.)
If you run into problems with the behavior of the go command when using
the Go module mirror or the Go checksum database, please file issues at
https://golang.org/issue/new, so that we can address them for the
Go 1.13 release.
For #25530.
This CL also documents GONOPROXY.
Fixes#32056.
Change-Id: I2fde82e071742272b0842efd9580df1a56947fec
Reviewed-on: https://go-review.googlesource.com/c/go/+/178179
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Apologies for the the nitpicky PR. I believe there is a minor typo in the documentation of `MaxScanTokenSize`, which confused me for a moment when I went to search for the referenced method, `Scan.Buffer`. Thanks!
Change-Id: I5d21e77276285206497fe75291001032c255cace
GitHub-Last-Rev: 635e35c019
GitHub-Pull-Request: golang/go#32193
Reviewed-on: https://go-review.googlesource.com/c/go/+/178637
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The new slice function returns the result of slicing its first argument by
the following arguments. Thus {{slice x 1 3}} is, in Go syntax, x[1:3].
Each sliced item must be a string, slice, or array.
Closed#30153
RELNOTE=yes
Change-Id: I63188c422848cee3d383a64dc4d046e3a1767c63
Reviewed-on: https://go-review.googlesource.com/c/go/+/161762
Reviewed-by: Rob Pike <r@golang.org>
Like panicking and erroring - wrapErrs should always be reset to
the default false. wrapErrs should only be true when set by Errorf.
Change-Id: I4d51cc2f0905109e232b0983dc5331bd34f138bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/178517
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Currently, some tests under test/fixedbugs never run:
$ for d in test/fixedbugs/*.dir; do
! test -f "${d%.dir}.go" && echo "$d"
done
test/fixedbugs/issue15071.dir
test/fixedbugs/issue15609.dir
test/fixedbugs/issue29612.dir
Because they missed the corresponding ".go" file, so "go run run.go"
will skip them.
Add missing ".go" files for those tests to make sure they will be
collected and run.
While at it, add another action "runindir", which does "go run ."
inside the t.goDirName then check the output.
Change-Id: I88000b3663a6a615d90c1cf11844ea0377403e3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/177798
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We want the builders to be able to cross-compile test binaries for a
few of the super slow builders that require either slow hardware or
slow full CPU emulation.
Updates golang/go#31217
Change-Id: I8d33b18efaf788f6f131354b2917ac9738ca975e
Reviewed-on: https://go-review.googlesource.com/c/go/+/178399
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This keeps transparency of a wrapped image.Image even after it is encoded.
Fixes#30995
Change-Id: I1f7ac98b1741f83ed740f6eda6c36b7e9b16e5af
Reviewed-on: https://go-review.googlesource.com/c/go/+/177377
Reviewed-by: Hayato Kawakami <kawakami.ozone@gmail.com>
Reviewed-by: Benny Siegert <bsiegert@gmail.com>
Run-TryBot: Benny Siegert <bsiegert@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As an optimization, function literals capture variables by value when
they're not assigned and their address has not been taken. Because
result parameters are implicitly assigned through return statements
(which do not otherwise set the "assigned" flag), result parameters
are explicitly handled to always capture by reference.
However, the logic was slightly mistaken because it was only checking
if the variable in the immediately enclosing context was a return
parameter, whereas in a multiply-nested function literal it would
itself be another closure variable (PAUTOHEAP) rather than a return
parameter (PPARAMOUT).
The fix is to simply test the outermost variable, like the rest of the
if statement's tests were already doing.
Fixes#32175.
Change-Id: Ibadde033ff89a1b47584b3f56c0014d8e5a74512
Reviewed-on: https://go-review.googlesource.com/c/go/+/178541
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
To a fifth reading of the relevant docs, it looks like
1) a constraint dictionary with no policy applies to all of them;
2) multiple applying constraint dictionaries should have their results OR'd;
3) untrusted certificates in the keychain should be used for chain building.
This fixes 1), approximates 2) and punts on 3).
Fixes#30672Fixes#30471
Change-Id: Ibbaabf0b77d267377c0b5de07abca3445c2c2302
Reviewed-on: https://go-review.googlesource.com/c/go/+/178539
Reviewed-by: Adam Langley <agl@golang.org>
Note how untrustedData is never NULL, so loadSystemRoots was checking
the wrong thing.
Also, renamed the C function to CopyPEMRoots to follow the
CoreFoundation naming convention on ownership.
Finally, redirect all debug output to standard error.
Change-Id: Ie80abefadf8974a75c0646aa02fcfcebcbe3bde8
Reviewed-on: https://go-review.googlesource.com/c/go/+/178538
Reviewed-by: Adam Langley <agl@golang.org>
Shorten some of the longest tests that run during all.bash.
Removes 7r 50u 21s from all.bash.
After this change, all.bash is under 5 minutes again on my laptop.
For #26473.
Change-Id: Ie0460aa935808d65460408feaed210fbaa1d5d79
Reviewed-on: https://go-review.googlesource.com/c/go/+/177559
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Each different file that does import "C" must be compiled
and analyzed separately by cgo. Having fewer files import "C"
reduces the cost of building the test. This is especially important
because this test is built and run four different times (with different
settings) during all.bash.
go test -c in this directory used to take over 20 seconds on my laptop.
Now it takes under 5 seconds.
Removes 23.4r 29.0u 21.5s from all.bash.
For #26473.
Change-Id: Ie7cb7b0d9d6138ebd2eb548d0d8ea6e409ae10b9
Reviewed-on: https://go-review.googlesource.com/c/go/+/177558
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
First, remove the randomization of initialization order.
Then, revert to source code order instead of sorted package path order.
This restores the behavior that was in 1.12.
A larger change which will implement the suggestion in #31636 will
wait for 1.14. It's too complicated for 1.13 at this point (it has
tricky interactions with plugins).
Fixes#31636
Change-Id: I35b48e8cc21cf9f93c0973edd9193d2eac197628
Reviewed-on: https://go-review.googlesource.com/c/go/+/178297
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If the char class is 0x0-0x10ffff we mistakenly would String that to `[^]`,
which is not a valid regex.
Fixes#31807
Change-Id: I9ceeaddc28b67b8e1de12b6703bcb124cc784556
Reviewed-on: https://go-review.googlesource.com/c/go/+/175679
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The Wrapper type no longer exists.
Change-Id: I21051f26c6722a957295819f2f385f2bbd0db355
Reviewed-on: https://go-review.googlesource.com/c/go/+/177618
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Gerrit is complaining about pushes that affect these files
and forcing people to use -o nokeycheck, which defeats
the point of the check. Hide the keys from this kind of scan
by marking them explicitly as testing keys.
This is a little annoying but better than training everyone
who ever edits one of these test files to reflexively override
the Gerrit check.
The only remaining keys explicitly marked as private instead
of testing are in examples, and there's not much to do
about those. Hopefully they are not edited as much.
Change-Id: I4431592b5266cb39fe6a80b40e742d97da803a0b
Reviewed-on: https://go-review.googlesource.com/c/go/+/178178
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Build a single binary containing all the TestPointerChecks
instead of building many small binaries,
each with its own cgo+compile+link invocation.
This cuts 'go test -run=TestPointerChecks'
from 6.7r 35.5u 26.1s to 2.1r 2.1u 1.4s.
Move as many cgo checks as possible into fewer test files
for TestReportsTypeErrors too.
This cuts 'go test -run=TestReportsTypeErrors'
from 2.1r 6.7u 6.7s to 1.5r 2.5u 2.5s.
After this change, all.bash runs in ~4:30 on my laptop.
For #26473.
Change-Id: I3787448b03689a1f62dd810957ab6013bb75582f
Reviewed-on: https://go-review.googlesource.com/c/go/+/177599
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Cuts api test time from 12.7r 26.2u 14.2s to 7.5r 12.1u 2.2s.
After this change, all.bash runs in ~4:36 on my laptop.
For #26473.
Change-Id: I4211e6afcd7ab61a4ed2c9a2aa5ac1ea04982695
Reviewed-on: https://go-review.googlesource.com/c/go/+/177597
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
typecheck type alias always replaces the original definition of the symbol.
This is wrong behavior because if the symbol's definition is replaced by a
local type alias, it ends up being written to compiled file as an alias,
instead of the original type.
To fix, only replace the definition of symbol with global type alias.
Fixes#31959
Change-Id: Id85a15e8a9d6a4b06727e655a95dc81e63df633a
Reviewed-on: https://go-review.googlesource.com/c/go/+/177378
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This change modifies Go to include image/webp as a built-in mime type for the .webp file extension.
Change-Id: Id46d34fac8cc859ddd69aa8669294815654214f8
GitHub-Last-Rev: f191e1c325
GitHub-Pull-Request: golang/go#32157
Reviewed-on: https://go-review.googlesource.com/c/go/+/178317
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
The test/codegen tests check all architectures
mentioned in the test file, but this requires
building at least the runtime for that architecture.
This CL changes the test to only check the local
architecture, leaving checking of other architectures
to the relevant builders, as usual.
This cuts 'go run run.go codegen' by 12r 78u 21s.
After this change, all.bash runs in ~4:40 on my laptop.
For #26473.
Change-Id: Ia0354d1aff2df2949f838528c8171410bc42dc8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/177577
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Both types.Sym and obj.LSym have the field Name, and that field is
widely used in compiler source. It can lead to confusion that when to
use which one.
So, adding documentation for clarifying the difference between them,
eliminate the confusion, or at least, make the code which use them
clearer for the reader.
See https://github.com/golang/go/issues/31252#issuecomment-481929174
Change-Id: I31f7fc6e4de4cf68f67ab2e3a385a7f451c796f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/175019
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
That way we will never have to look up the file/line for the frame
that's next to be returned when the user stops calling Next.
For the benchmark from #32093:
name old time/op new time/op delta
Helper-4 948ns ± 1% 836ns ± 3% -11.89% (p=0.000 n=9+9)
(#32093 was fixed with a more specific, and better, fix, but this
fix is much more general.)
Change-Id: I89e796f80c9706706d8d8b30eb14be3a8a442846
Reviewed-on: https://go-review.googlesource.com/c/go/+/178077
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, this test allocates many objects and relies on heap-growth
scavenging to happen unconditionally on heap-growth. However with the
new pacing system for the scavenging, this is no longer true and the
test is flaky.
So, this change overhauls TestPhysicalMemoryUtilization to check the
same aspect of the runtime, but in a much more robust way.
Firstly, it sets up a much more constrained scenario: only 5 objects are
allocated total with a maximum worst-case (i.e. the test fails) memory
footprint of about 16 MiB. The test is now aware that scavenging will
only happen if the heap growth causes us to push way past our scavenge
goal, which is based on the heap goal. So, it makes the holes in the
test much bigger and the actual retained allocations much smaller to
keep the heap goal at the heap's minimum size. It does this twice to
create exactly two unscavenged holes. Because the ratio between the size
of the "saved" objects and the "condemned" object is so small, two holes
are sufficient to create a consistent test.
Then, the test allocates one enormous object (the size of the 4 other
objects allocated, combined) with the intent that heap-growth scavenging
should kick in and scavenge the holes. The heap goal will rise after
this object is allocated, so it's very important we do all the
scavenging in a single allocation that exceeds the heap goal because
otherwise the rising heap goal could foil our test.
Finally, we check memory use relative to HeapAlloc as before. Since the
runtime should scavenge the entirety of the remaining holes,
theoretically there should be no more free and unscavenged memory.
However due to other allocations that may happen during the test we may
still see unscavenged memory, so we need to have some threshold. We keep
the current 10% threshold which, while arbitrary, is very conservative
and should easily account for any other allocations the test makes.
Before, we also had to ensure the allocations we were making looked
large relative to the size of a heap arena since newly-mapped memory was
considered unscavenged, and so that could significantly skew the test.
However, thanks to the fix for #32012 we were able to reduce memory use
to 16 MiB in the worst case.
Fixes#32010.
Change-Id: Ia38130481e292f581da7fa3289c98c99dc5394ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/177237
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If we look at the issues in the past releases that are related
to go command that involved modules, its usually mention or ask about
the value of GO111MODULE, either in separate line or in separate
comment.
There are quite long time range before GO111MODULE will be removed
(unused). The next release is still default to auto [1], and until Go
1.13 unsupported (two releases after that) there is about one and half
years after that.
Since the change is not that big (one line) [2], maybe temporary adding
it to "go env" give more clarity and benefit in issue reporting rather
than not.
[1] https://github.com/golang/go/issues/31857Fixes#29656
Change-Id: I609ad6664774018e4f4147ec6158485172968e16
Reviewed-on: https://go-review.googlesource.com/c/go/+/176837
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
CL 14870 added internal/race to factor out duplicated race thunks,
we should use it.
No signification changes in compile time and compile binary size.
Change-Id: I786af44dd5bb0f4ab6709432eeb603f27a5b6c63
Reviewed-on: https://go-review.googlesource.com/c/go/+/178118
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The "After it is called, changing rw.Header will not affect
rw.HeaderMap" claim predates the Result method which changed how the
Recorder should be used.
Fixes#32144Fixes#32136
Change-Id: I95bdfa5ac489ce7b0202824bb5663f4da188e8a7
Reviewed-on: https://go-review.googlesource.com/c/go/+/178058
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
The chunks that were referenced by fd.iovecs would not be GC.
Change-Id: I7bfcb91a3fef57a4a1861168e9cd3ab55ce1334e
GitHub-Last-Rev: e0b7f68447
GitHub-Pull-Request: golang/go#32138
Reviewed-on: https://go-review.googlesource.com/c/go/+/178037
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
callerName requested 2 PCs from Callers, and that causes
both to be looked up in the file/line mapping.
We really only need to do the work for one PC.
(And in fact the caller doesn't need file/line at all, but
the Callers API can't express that.)
We used to request 2 PCs because in 1.11 and earlier we
stored an inline skip count in the second entry.
That's not necessary any more (as of 1.12).
Fixes#32093
Change-Id: I7b272626ef6496e848ee8af388cdaafd2556857b
Reviewed-on: https://go-review.googlesource.com/c/go/+/177858
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Caleb Spare <cespare@gmail.com>
In TLS 1.3 session tickets are delivered after the handshake, and it
looks like now the Google servers wait until the first flight of data to
send them (or our timeout is too low). Cause some data to be sent so we
can avoid the guessing game.
Fixes#32090
Change-Id: I54af4acb3a89cc70c9e14a5dfe18a44c29a841a7
Reviewed-on: https://go-review.googlesource.com/c/go/+/177877
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The motivation for doing so is to avoid making inaccurate claims.
Logging may not go to os.Stderr if anyone overrides the log package's
default output via https://godoc.org/log#SetOutput. Saying that
the standard logger is used should be sufficient to explain the
behavior, and users can infer that os.Stderr is used by default,
unless it's changed.
This change is the same as what was applied to http.Server.ErrorLog
documentation in CL 53950.
Change-Id: I32873fc548ceee573f8616b4d49b8a8b98881803
Reviewed-on: https://go-review.googlesource.com/c/go/+/176817
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When we downgrade a module (using 'go get m@none' or similar), we
exclude versions of other modules that depend on it. We'll try
previous versions (in the "versions" list returned by the proxy or in
codeRepo.Versions for vcs) until we find a version that doesn't
require an excluded module version.
If older versions of a module are broken for some reason,
mvs.Downgrade currently panics. With this change, we ignore versions
with errors during downgrade.
A frequent cause of this is incompatible v2+ versions. These are
common if a repository tagged v2.0.0 before migrating to modules, then
tagged v2.0.1 with a go.mod file later. v2.0.0 is incorrectly
considered part of the v2 module.
Fixes#31942
Change-Id: Icaa75c5c93f73f18a400c22f18a8cc603aa4011a
Reviewed-on: https://go-review.googlesource.com/c/go/+/177337
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
