That way we don't need to call into the runtime for every
type assertion (to an interface type).
name old time/op new time/op delta
TypeAssert-24 3.78ns ± 3% 1.00ns ± 1% -73.53% (p=0.000 n=10+8)
Change-Id: I0ba308aaf0f24a5495b4e13c814d35af0c58bfde
Reviewed-on: https://go-review.googlesource.com/c/go/+/529316
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
That way we don't need to call into the runtime when the type being
switched on has been seen many times before.
The cache is just a hash table of a sample of all the concrete types
that have been switched on at that source location. We record the
matching case number and the resulting itab for each concrete input
type.
The caches seldom get large. The only two in a run of all.bash that
get more than 100 entries, even with the sampling rate set to 1, are
test/fixedbugs/issue29264.go, with 101
test/fixedbugs/issue29312.go, with 254
Both happen at the type switch in fmt.(*pp).handleMethods, perhaps
unsurprisingly.
name old time/op new time/op delta
SwitchInterfaceTypePredictable-24 25.8ns ± 2% 2.5ns ± 3% -90.43% (p=0.000 n=10+10)
SwitchInterfaceTypeUnpredictable-24 37.5ns ± 2% 11.2ns ± 1% -70.02% (p=0.000 n=10+10)
Change-Id: I4961ac9547b7f15b03be6f55cdcb972d176955eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/526658
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
For type switches where the targets are interface types,
call into the runtime once instead of doing a sequence
of assert* calls.
name old time/op new time/op delta
SwitchInterfaceTypePredictable-24 26.6ns ± 1% 25.8ns ± 2% -2.86% (p=0.000 n=10+10)
SwitchInterfaceTypeUnpredictable-24 39.3ns ± 1% 37.5ns ± 2% -4.57% (p=0.000 n=10+10)
Not super helpful by itself, but this code organization allows
followon CLs that add caching to the lookups.
Change-Id: I7967f85a99171faa6c2550690e311bea8b54b01c
Reviewed-on: https://go-review.googlesource.com/c/go/+/526657
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
The types2 typechecker already reported all invalid conversions required
by the Go language spec. However, the conversion involves go pragma is
not specified in the spec, so is not checked by types2.
Fixing this by handling the error gracefully during typecheck, just like
how old typechecker did before CL 394575.
Fixes#63333
Change-Id: I04c4121971c62d96f75ded1794ab4bdf3a6cd0ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/532515
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Add a new form of RLDC which maps directly to the ISA definition
of rldc: RLDC Rs, $sh, $mb, Ra. This is used to generate mask
constants described below.
Using MOVD $-1, Rx; RLDC Rx, $sh, $mb, Rx, any mask constant
can be generated. A mask is a contiguous series of 1 bits, which
may wrap.
Change-Id: Ifcaae1114080ad58b5fdaa3e5fc9019e2051f282
Reviewed-on: https://go-review.googlesource.com/c/go/+/531120
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Check for shifted 16b constants, and transform them to avoid the load
penalty. This should be much faster than loading, and reduce binary
size by reducing the constant pool size.
Change-Id: I6834e08be7ca88e3b77449d226d08d199db84299
Reviewed-on: https://go-review.googlesource.com/c/go/+/531119
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Change-Id: I8787458f9ccd3b5cdcdda820d8a45deb4f77eade
GitHub-Last-Rev: be865d67ef
GitHub-Pull-Request: golang/go#63165
Reviewed-on: https://go-review.googlesource.com/c/go/+/530120
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
This sequence can show up in the lowering pass on PPC64. If it
makes it to the latelower pass, it will cause an error because
it looks like it can be turned into RLDICL, but -1 isn't an
accepted mask.
Also, print more debug info if panic is called from
encodePPC64RotateMask.
Fixes#62698
Change-Id: I0f3322e2205357abe7fc28f96e05e3f7ad65567c
Reviewed-on: https://go-review.googlesource.com/c/go/+/529195
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Add compiler support for range over functions.
See the large comment at the top of
cmd/compile/internal/rangefunc/rewrite.go for details.
This is only reachable if GOEXPERIMENT=range is set,
because otherwise type checking will fail.
For proposal #61405 (but behind a GOEXPERIMENT).
For #61717.
Change-Id: I05717f94e63089c503acc49b28b47edeb4e011b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/510541
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
Add compiler implementation of range over integers.
This is only reachable if GOEXPERIMENT=range is set,
because otherwise type checking will fail.
For proposal #61405 (but behind a GOEXPERIMENT).
For #61717.
Change-Id: I4e35a73c5df1ac57f61ffb54033a433967e5be51
Reviewed-on: https://go-review.googlesource.com/c/go/+/510538
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
Add type-checking logic for range over integers and functions,
behind GOEXPERIMENT=range.
For proposal #61405 (but behind a GOEXPERIMENT).
For #61717.
Change-Id: Ibf78cf381798b450dbe05eb922df82af2b009403
Reviewed-on: https://go-review.googlesource.com/c/go/+/510537
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Auto-Submit: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
This patch changes the inliner to use callsite scores when deciding to
inline as opposed to looking only at callee cost/hairyness.
For this to work, we have to relax the inline budget cutoff as part of
CanInline to allow for the possibility that a given function might
start off with a cost of N where N > 80, but then be called from a
callsites whose score is less than 80. Once a given function F in
package P has been approved by CanInline (based on the relaxed budget)
it will then be emitted as part of the export data, meaning that other
packages importing P will need to also need to compute callsite scores
appropriately.
For a function F that calls function G, if G is marked as potentially
inlinable then the hairyness computation for F will use G's cost for
the call to G as opposed to the default call cost; for this to work
with the new scheme (given relaxed cost change described above) we
use G's cost only if it falls below inlineExtraCallCost, otherwise
just use inlineExtraCallCost.
Included in this patch are a bunch of skips and workarounds to
selected 'errorcheck' tests in the <GOROOT>/test directory to deal
with the additional "can inline" messages emitted when the new inliner
is turned on.
Change-Id: I9be5f8cd0cd8676beb4296faf80d2f6be7246335
Reviewed-on: https://go-review.googlesource.com/c/go/+/519197
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
There's several copies of this function. We only need one.
While here, normalize so that we always declare parameters, and always
use the names ~pNN for params and ~rNN for results.
Change-Id: I49e90d3fd1820f3c07936227ed5cfefd75d49a1c
Reviewed-on: https://go-review.googlesource.com/c/go/+/528415
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Than McIntosh <thanm@google.com>
sparse conditional constant propagation can discover optimization
opportunities that cannot be found by just combining constant folding
and constant propagation and dead code elimination separately.
This is a re-submit of PR#59575, which fix a broken dominance relationship caught by ssacheck
Updates https://github.com/golang/go/issues/59399
Change-Id: I57482dee38f8e80a610aed4f64295e60c38b7a47
GitHub-Last-Rev: 830016f24e
GitHub-Pull-Request: golang/go#60469
Reviewed-on: https://go-review.googlesource.com/c/go/+/498795
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Previously, the unified frontend implemented unsafe.Sizeof, etc that
involved derived types by constructing a normal OSIZEOF, etc
expression, including fully instantiating their argument. (When
unsafe.Sizeof is applied to a non-generic type, types2 handles
constant folding it.)
This worked, but involves unnecessary work, since all we really need
to track is the argument type (and the field selections, for
unsafe.Offsetof).
Further, the argument expression could generate temporary variables,
which would then go unused after typecheck replaced the OSIZEOF
expression with an OLITERAL. This results in compiler failures after
CL 523315, which made later passes stricter about expecting the
frontend to not construct unused temporaries.
Fixes#62515.
Change-Id: I37baed048fd2e35648c59243f66c97c24413aa94
Reviewed-on: https://go-review.googlesource.com/c/go/+/527097
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Currently, cmd/compile optimizes `var a = true; var b = a` into `var a
= true; var b = true`. But this may not be safe if we need to
initialize any other global variables between `a` and `b`, and the
initialization involves calling a user-defined function that reassigns
`a`.
This CL changes staticinit to keep track of the initialization
expressions that we've seen so far, and to stop applying the
staticcopy optimization once we've seen an initialization expression
that might have modified another global variable within this package.
To help identify affected initializers, this CL adds a -d=staticcopy
flag to warn when a staticcopy is suppressed and turned into a dynamic
copy.
Currently, `go build -gcflags=all=-d=staticcopy std` reports only four
instances:
```
encoding/xml/xml.go:1600:5: skipping static copy of HTMLEntity+0 with map[string]string{...}
encoding/xml/xml.go:1869:5: skipping static copy of HTMLAutoClose+0 with []string{...}
net/net.go:661:5: skipping static copy of .stmp_31+0 with poll.ErrNetClosing
net/http/transport.go:2566:5: skipping static copy of errRequestCanceled+0 with ~R0
```
Fixes#51913.
Change-Id: Iab41cf6f84c44f7f960e4e62c28a8aeaade4fbcf
Reviewed-on: https://go-review.googlesource.com/c/go/+/395541
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
When creating the struct type to hold variables captured by a function
literal, we currently reuse the captured variable names as fields.
However, there's no particular reason to do this: these struct types
aren't visible to users, and it adds extra complexity in making sure
fields belong to the correct packages.
Further, it turns out we were getting that subtly wrong. If two
function literals from different packages capture variables with
identical names starting with an uppercase letter (and in the same
order and with corresponding identical types) end up in the same
function (e.g., due to inlining), then we could end up creating
closure struct types that are "different" (i.e., not types.Identical)
yet end up with equal LinkString representations (which violates
LinkString's contract).
The easy fix is to just always use simple, exported, generated field
names in the struct. This should allow further struct reuse across
packages too, and shrink binary sizes slightly.
Fixes#62498.
Change-Id: I9c973f5087bf228649a8f74f7dc1522d84a26b51
Reviewed-on: https://go-review.googlesource.com/c/go/+/527135
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
One of the more tedious quirks of the original frontend (i.e.,
typecheck) to preserve was that it preserved the original
representation of constants into the backend. To fit into the unified
IR model, I ended up implementing a fairly heavyweight workaround:
simply record the original constant's string expression in the export
data, so that diagnostics could still report it back, and match the
old test expectations.
But now that there's just a single frontend to support, it's easy
enough to just update the test expectations and drop this support for
"raw" constant expressions.
Change-Id: I1d859c5109d679879d937a2b213e777fbddf4f2f
Reviewed-on: https://go-review.googlesource.com/c/go/+/526376
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Unfortunately, there isn't a single op that provides the resulting
computation.
At least, I couldn't find one.
Fixes#62469
Change-Id: I236f3965b827aaeb3d70ef9fe89be66b116494f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/526276
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Generate RLDIC[LR] instead of MOVD mask, Rx; AND Rx, Ry, Rz.
This helps reduce code size, and reduces the latency caused
by the constant load.
Similarly, for smaller-than-register values, truncate constants
which exceed the range of the value's type to avoid needing to
load a constant.
Change-Id: I6019684795eb8962d4fd6d9585d08b17c15e7d64
Reviewed-on: https://go-review.googlesource.com/c/go/+/515576
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
This reverts commit c1dfbf72e1.
Reason for revert: TESTL rule is wrong when the result is used for an ordered comparison.
Fixes#62360
Change-Id: I4d5b6aca24389b0a2bf767bfbc0a9d085359eb38
Reviewed-on: https://go-review.googlesource.com/c/go/+/524255
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Jakub Ciolek <jakub@ciolek.dev>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
In CL 522879, I moved the logic for setting Addrtaken from typecheck's
markAddrOf and ComputeAddrtaken directly into ir.NewAddrExpr. However,
I took the logic from markAddrOf, and failed to notice that
ComputeAddrtaken also set Addrtaken on the canonical ONAME.
The result is that if the only address-of expressions were within a
function literal, the canonical variable never got marked Addrtaken.
In turn, this could cause the consistency check in ir.Reassigned to
fail. (Yay for consistency checks turning mistakes into ICEs, rather
than miscompilation.)
Fixes#62313.
Change-Id: Ieab2854cd7fcc1b6c5d1e61de66453add9890a4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/523375
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Also gofmt a test file to make sure the parser works.
Fixes#62267.
Change-Id: I9b9f12b06bae7df626231000879b5ed7df3cd9ba
Reviewed-on: https://go-review.googlesource.com/c/go/+/522635
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
This test passes "-linkmode=external" to 'go run' to link the binary
using the system C linker.
CGO_ENABLED=0 explicitly tells cmd/go not to use the C toolchain,
so the test should not be run in that configuration.
Updates #46330.
Change-Id: I16ac66aac91178045f9decaeb28134061e9711f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/522495
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
In go.dev/cl/517775, I moved the frontend's deadcode elimination pass
into unified IR. But I also made a small enhancement: a branch like
"if x || true" is now detected as always taken, so the else branch can
be eliminated.
However, the inliner also has an optimization for delaying the
introduction of the result temporary variables when there's a single
return statement (added in go.dev/cl/266199). Consequently, the
inliner turns "if x || true { return true }; return true" into:
if x || true {
~R0 := true
goto .i0
}
.i0:
// code that uses ~R0
In turn, this confuses phi insertion, because it doesn't recognize
that the "if" statement is always taken, and so ~R0 will always be
initialized.
With this CL, after inlining we instead produce:
_ = x || true
~R0 := true
goto .i0
.i0:
Fixes#62211.
Change-Id: Ic8a12c9eb85833ee4e5d114f60e6c47817fce538
Reviewed-on: https://go-review.googlesource.com/c/go/+/522096
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
For large interface -> concrete type switches, we can use a jump
table on some bits of the type hash instead of a binary search on
the type hash.
name old time/op new time/op delta
SwitchTypePredictable-24 1.99ns ± 2% 1.78ns ± 5% -10.87% (p=0.000 n=10+10)
SwitchTypeUnpredictable-24 11.0ns ± 1% 9.1ns ± 2% -17.55% (p=0.000 n=7+9)
Change-Id: Ida4768e5d62c3ce1c2701288b72664aaa9e64259
Reviewed-on: https://go-review.googlesource.com/c/go/+/521497
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
This lets us combine more write barriers, getting rid of some of the
test+branch and gcWriteBarrier* calls.
With the new write barriers, it's easy to add a few non-pointer writes
to the set of values written.
We allow up to 2 non-pointer writes between pointer writes. This is enough
for, for example, adjacent slice fields.
Fixes#62126
Change-Id: I872d0fa9cc4eb855e270ffc0223b39fde1723c4b
Reviewed-on: https://go-review.googlesource.com/c/go/+/521498
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Currently, the types package has IsRuntimePkg and IsReflectPkg
predicates for testing if a Pkg is the runtime or reflect packages.
IsRuntimePkg returns "true" for any "CompilingRuntime" package, which
includes all of the packages imported by the runtime. This isn't
inherently wrong, except that all but one use of it is of the form "is
this Sym a specific runtime.X symbol?" for which we clearly only want
the package "runtime" itself. IsRuntimePkg was introduced (as
isRuntime) in CL 37538 as part of separating the real runtime package
from the compiler built-in fake runtime package. As of that CL, the
"runtime" package couldn't import any other packages, so this was
adequate at the time.
We could fix this by just changing the implementation of IsRuntimePkg,
but the meaning of this API is clearly somewhat ambiguous. Instead, we
replace it with a new RuntimeSymName function that returns the name of
a symbol if it's in package "runtime", or "" if not. This is what
every call site (except one) actually wants, which lets us simplify
the callers, and also more clearly addresses the ambiguity between
package "runtime" and the general concept of a runtime package.
IsReflectPkg doesn't have the same issue of ambiguity, but it
parallels IsRuntimePkg and is used in the same way, so we replace it
with a new ReflectSymName for consistency.
Change-Id: If3a81d7d11732a9ab2cac9488d17508415cfb597
Reviewed-on: https://go-review.googlesource.com/c/go/+/521696
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This CL adds FMADDS,FMSUBS,FNMADDS,FNMSUBS SSA support for riscv
Change-Id: I1e7dd322b46b9e0f4923dbba256303d69ed12066
Reviewed-on: https://go-review.googlesource.com/c/go/+/506616
Reviewed-by: Joel Sing <joel@sing.id.au>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: M Zhuo <mzh@golangcn.org>
There's no need for distinct hmap and hiter types for each map.
Shaves 9kB off cmd/go binary size.
Change-Id: I7bc3b2d8ec82e7fcd78c1cb17733ebd8b615990a
Reviewed-on: https://go-review.googlesource.com/c/go/+/521615
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
If we're not using the upper bits, don't bother issuing a
sign/zero extension operation.
For arm64, after CL 520916 which fixed a correctness bug with
extensions but as a side effect leaves many unnecessary ones
still in place.
Change-Id: I5f4fe4efbf2e9f80969ab5b9a6122fb812dc2ec0
Reviewed-on: https://go-review.googlesource.com/c/go/+/521496
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This CL implements the remainder of the zero-copy string->[]byte
conversion optimization initially attempted in go.dev/cl/520395, but
fixes the tracking of mutations due to ODEREF/ODOTPTR assignments, and
adds more comprehensive tests that I should have included originally.
However, this CL also keeps it behind the -d=zerocopy flag. The next
CL will enable it by default (for easier rollback).
Updates #2205.
Change-Id: Ic330260099ead27fc00e2680a59c6ff23cb63c2b
Reviewed-on: https://go-review.googlesource.com/c/go/+/520599
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This reverts CL 520395.
Reason for revert: thanm@ pointed out failure cases.
Change-Id: I3fd60b73118be3652be2c08b77ab39e793b42110
Reviewed-on: https://go-review.googlesource.com/c/go/+/520596
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
This CL enables the latent support for string->[]byte conversions
added go.dev/cl/520259.
One catch is that we need to make sure []byte("") evaluates to a
non-nil slice, even if "" is (nil, 0). This CL addresses that by
adding a "ptr != nil" check for OSTR2BYTESTMP, unless the NonNil flag
is set.
The existing uses of OSTR2BYTESTMP (which aren't concerned about
[]byte("") evaluating to nil) are updated to set this flag.
Fixes#2205.
Change-Id: I35a9cb16c164cd86156b7560915aba5108d8b523
Reviewed-on: https://go-review.googlesource.com/c/go/+/520395
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Currently, we rewrite:
go f(new(T))
into:
tmp := new(T)
go func() { f(tmp) }()
However, we can both shrink the closure and improve escape analysis by
instead rewriting it into:
go func() { f(new(T)) }()
This CL does that.
Change-Id: Iae16a476368da35123052ca9ff41c49159980458
Reviewed-on: https://go-review.googlesource.com/c/go/+/520340
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Normalizing go/defer statements to always use functions with zero
parameters and zero results was added to escape analysis, because that
was the earliest point at which all three frontends converged. Now
that we only have the unified frontend, we can do it during typecheck,
which is where we perform all other desugaring and normalization
rewrites.
Change-Id: Iebf7679b117fd78b1dffee2974bbf85ebc923b23
Reviewed-on: https://go-review.googlesource.com/c/go/+/520260
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
I previously used a clumsy hack to copy Closgen back and forth while
inlining, to handle when an inlined function contains closures, which
need to each be uniquely numbered.
The real solution was to name the closures using r.inlCaller, rather
than r.curfn. This CL adds a helper method to do exactly this.
Change-Id: I510553b5d7a8f6581ea1d21604e834fd6338cb06
Reviewed-on: https://go-review.googlesource.com/c/go/+/520339
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This CL extends escape analysis in two ways.
First, we already optimize directly called closures. For example,
given:
var x int // already stack allocated today
p := func() *int { return &x }()
we don't need to move x to the heap, because we can statically track
where &x flows. This CL extends the same idea to work for indirectly
called closures too, as long as we know everywhere that they're
called. For example:
var x int // stack allocated after this CL
f := func() *int { return &x }
p := f()
This will allow a subsequent CL to move the generation of go/defer
wrappers earlier.
Second, this CL adds tracking to detect when pointer values flow to
the pointee operand of an indirect assignment statement (i.e., flows
to p in "*p = x") or to builtins that modify memory (append, copy,
clear). This isn't utilized in the current CL, but a subsequent CL
will make use of it to better optimize string->[]byte conversions.
Updates #2205.
Change-Id: I610f9c531e135129c947684833e288ce64406f35
Reviewed-on: https://go-review.googlesource.com/c/go/+/520259
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
For aggregate-typed arguments passed to a call, expandCalls
decomposed them into parts in the same block where the value
was created. This is not necessarily the call block, and in
the case where stores are involved, can change the memory
leaving that block, and getting that right is problematic.
Instead, do all the expanding in the same block as the call,
which avoids the problems of (1) not being able to reorder
loads/stores across a block boundary to conform to memory
order and (2) (incorrectly, not) exposing the new memory to
consumers in other blocks. Putting it all in the same block
as the call allows reordering, and the call creates its own
new memory (which is already dealt with correctly).
Fixes#61992.
Change-Id: Icc7918f0d2dd3c480cc7f496cdcd78edeca7f297
Reviewed-on: https://go-review.googlesource.com/c/go/+/519276
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Open-coded defer slots are assigned indices upfront, so they're
logically like elements in an array. Without reassigning the indices,
we need to keep all of the elements alive so their relative offsets
are correct.
Fixes#61895.
Change-Id: Ie0191fdb33276f4e8ed0becb69086524fff022b2
Reviewed-on: https://go-review.googlesource.com/c/go/+/517856
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 497276 added optimization for len(string([]byte)) by avoiding call to
slicebytetostring. However, the bytes to string expression may contain
init nodes, which need to be preserved. Otherwise, it would make the
liveness analysis confusing about the lifetime of temporary variables
created by init nodes.
Fixes#61778
Change-Id: I6d1280a7d61bcc75f11132af41bda086f084ab54
Reviewed-on: https://go-review.googlesource.com/c/go/+/516375
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Stop using BTSconst and friends when ORLconst can be used instead.
OR can be issued by more function units than BTS can, so it could
lead to better IPC. OR might take a few more bytes to encode, but
not a lot more.
Still use BTSconst for cases where the constant otherwise wouldn't
fit and would require a separate movabs instruction to materialize
the constant. This happens when setting bits 31-63 of 64-bit targets.
Add BTS-to-memory operations so we don't need to load/bts/store.
Fixes#61694
Change-Id: I00379608df8fb0167cb01466e97d11dec7c1596c
Reviewed-on: https://go-review.googlesource.com/c/go/+/515755
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Fixes#61629
This reduce the pressure on regalloc because then the loop only keep alive
one value (the iterator) instead of the iterator and the upper bound since
the comparison now acts against an immediate, often zero which can be skipped.
This optimize things like:
for i := 0; i < n; i++ {
Or a range over a slice where the index is not used:
for _, v := range someSlice {
Or the new range over int from #61405:
for range n {
It is hit in 975 unique places while doing ./make.bash.
Change-Id: I5facff8b267a0b60ea3c1b9a58c4d74cdb38f03f
Reviewed-on: https://go-review.googlesource.com/c/go/+/512935
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Jorropo <jorropo.pgm@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
s==s is always true for strings. This comes up in NaN testing in
generic code, where we want x==x to compile completely away except for
float types.
Fixes#60777
Change-Id: I3ce054b5121354de2f9751b010fb409f148cb637
Reviewed-on: https://go-review.googlesource.com/c/go/+/503795
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
If we load 2 values and then store those 2 loaded values, we can likely
perform that operation with a single wider load and store.
Fixes#60709
Change-Id: Ifc5f92c2f1b174c6ed82a69070f16cec6853c770
Reviewed-on: https://go-review.googlesource.com/c/go/+/502295
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
The compiler/assembler's -S output prints relocation type
numerically, which is hard to understand. Every time I need to
count the relocation type constants to figure out which relocation
it actually is. Print the symbolic name instead.
Change-Id: I4866873bbae8b3dc0ee212609cb00280f9164243
Reviewed-on: https://go-review.googlesource.com/c/go/+/501856
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
(ANDCCconst [y] (MOV.*reg x)) should only be merged when zero
extending. Otherwise, sign bits are lost on negative values.
(ANDCCconst [0xFF] (MOVBreg x)) should be simplified to a zero
extension of x. Likewise for the MOVHreg variant.
Fixes#61297
Change-Id: I04e4fd7dc6a826e870681f37506620d48393698b
Reviewed-on: https://go-review.googlesource.com/c/go/+/508775
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Paul Murphy <murp@ibm.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
User code is unlikely to be correct, but don't crash the compiler
when the offset of a pointer in an object is not a multiple of the
pointer size.
Fixes#61187
Change-Id: Ie56bfcb38556c5dd6f702ae4ec1d4534c6acd420
Reviewed-on: https://go-review.googlesource.com/c/go/+/508555
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
According to RISCV manual 11.6:
FMADD x,y,z computes x*y+z and
FNMADD x,y,z => -x*y-z
FMSUB x,y,z => x*y-z
FNMSUB x,y,z => -x*y+z respectively
However our implement of SSA convert FMADD -x,y,z to FNMADD x,y,z which
is wrong and should be convert to FNMSUB according to manual.
Change-Id: Ib297bc83824e121fd7dda171ed56ea9694a4e575
Reviewed-on: https://go-review.googlesource.com/c/go/+/506575
Run-TryBot: M Zhuo <mzh@golangcn.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Joedian Reid <joedian@golang.org>
Reviewed-by: Michael Munday <mike.munday@lowrisc.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
The large-function phi placement algorithm evidently doesn't like the
same pseudo-variable being used to represent expressions of varying
types.
Instead, use the same tactic as used for "valVar" (ssa.go:6585--6587),
which is to just generate a fresh marker node each time.
Maybe we could just use the OMIN/OMAX nodes themselves as the key
(like we do for OANDAND/OOROR), but that just seems needlessly risky
for negligible memory savings. Using fresh marker values each time
seems obviously safe by comparison.
Fixes#61041.
Change-Id: Ie2600c9c37b599c2e26ae01f5f8a433025d7fd08
Reviewed-on: https://go-review.googlesource.com/c/go/+/506679
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
For float or string, min/max builtin performs a runtime call, so we need
to save its result to temporary variable. Otherwise, the runtime call
will clobber closure's arguments currently on the stack when passing
min/max as argument to closures.
Fixes#60990
Change-Id: I1397800f815ec7853182868678d0f760b22afff2
Reviewed-on: https://go-review.googlesource.com/c/go/+/506115
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Our large-function phi placement algorithm is incompatible with phi
opcodes already existing in the SSA representation. Instead, use simple
variable assignments and have the phi placement algorithm place the phis
we need for min/max.
Turns out the small-function phi placement algorithm doesn't have this
sensitivity, so this bug only occurs in large functions (>500 basic blocks).
Maybe we should document/check that no phis are present when we start
phi placement (regardless of size). Leaving for a potential separate CL.
We should probably also fix the placement algorithm to handle existing
phis correctly. But this CL is probably a lot smaller/safer than
messing with phi placement.
Fixes#60982
Change-Id: I59ba7f506c72b22bc1485099a335d96315ebef67
Reviewed-on: https://go-review.googlesource.com/c/go/+/505756
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
CL 410344 fixed missing method value wrapper, by visiting body of
wrapper function after applying inlining pass.
CL 492017 allow more inlining of functions that construct closures,
which ends up making the wrapper function now inlineable, but can
contain closure nodes that couldn't be inlined. These closures body may
contain OMETHVALUE nodes that we never seen, thus we need to scan
closures body for finding them.
Fixes#60945
Change-Id: Ia1e31420bb172ff87d7321d2da2989ef23e6ebb6
Reviewed-on: https://go-review.googlesource.com/c/go/+/505255
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Change-Id: Idd872c5b90dbca564ed8a37bb3683e642142ae63
Reviewed-on: https://go-review.googlesource.com/c/go/+/505015
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Currently ArenaNew expects the type passed in to be a *T and it returns
a *T. This does not match the function's documentation.
Since this is an experiment, change ArenaNew to match the documentation.
This more closely aligns ArenaNew with arena.New. (Takes a type T,
returns a *T value.)
Note that this is a breaking change. However, as far as pkg.go.dev can
tell, there's exactly one package using it in the open source world.
Also, add smoke test for the exported API, which is just a wrapper
around the internal API. Clearly there's enough room for error here that
it should be tested, but we don't need thorough tests at this layer
because that already exists in the runtime. We just need to make sure it
basically works.
Fixes#60528.
Change-Id: I673cc4609378380ef80648b0c2eb2928e73f49c9
Reviewed-on: https://go-review.googlesource.com/c/go/+/501860
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
types2 have already errored about any spec-required overflows, and
division by zero. CL 469595 unintentionally fixed typecheck not to error
about overflows, but zero division is still be checked during tcArith.
This causes unsafe operations with variable size failed to compile,
instead of raising runtime error.
Fixes#60601
Change-Id: I7bea2821099556835c920713397f7c5d8a4025ac
Reviewed-on: https://go-review.googlesource.com/c/go/+/501735
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Don't use the line number of the argument itself, as that may be from
arbitrarily earlier in the function.
Fixes#60673
Change-Id: Ifc0a2aaae221a256be3a4b0b2e04849bae4b79d7
Reviewed-on: https://go-review.googlesource.com/c/go/+/502656
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@google.com>
CL 496257 adds min/max builtins, which may appear as argument to a
function call, so it will be tested by mayCall. But those ops are not
handled by mayCall, causes the compiler crashes.
Fixes#60582
Change-Id: I729f10bf62b4aad39ffcb1433f576e74d09fdd9a
Reviewed-on: https://go-review.googlesource.com/c/go/+/500575
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
HAUTO should be handled the same way as other stack offsets for
adding to constant pool. Add the missing cases.
Fixes#57955.
Change-Id: If7fc82cafb2bbf0a6121e73e353b8825cb36b5bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/463138
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Some testdir tests fail if GOEXPERIMENT=cgocheck2 is set. Fix this by
skipping these tests.
Change-Id: I58d4ef0cceb86bcf93220b4a44de9b9dc4879b16
Reviewed-on: https://go-review.googlesource.com/c/go/+/499675
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Two interface types that are assignable don't have to be identical;
specifically, if they are defined types, they can be different
defined types. If those defined types specify type parameters which
are never used, do not infer a type argument based on the instantiation
of a matching defined type.
Adjusted three existing tests where we inferred type arguments incorrectly.
Fixes#60377.
Change-Id: I91fb207235424b3cbc42b5fd93eee619e7541cb7
Reviewed-on: https://go-review.googlesource.com/c/go/+/498315
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
sparse conditional constant propagation can discover optimization opportunities that cannot be found by just combining constant folding and constant propagation and dead code elimination separately.
Updates #59399
Change-Id: Ia954e906480654a6f0cc065d75b5912f96f36b2e
GitHub-Last-Rev: 90fc02db99
GitHub-Pull-Request: golang/go#59575
Reviewed-on: https://go-review.googlesource.com/c/go/+/483875
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
CL 415241 and CL 411935 break tests into unified/nounified variants, for
compatibility with old frontend while developing unified IR. Now the old
frontend was gone, so moving those tests back to the original files.
Change-Id: Iecdcd4e6ee33c723f6ac02189b0be26248e15f0f
Reviewed-on: https://go-review.googlesource.com/c/go/+/497275
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
In Go 1.17, cmd/compile gained the ability to inline calls to
functions that contain function literals (aka "closures"). This was
implemented by duplicating the function literal body and emitting a
second LSym, because in general it might be optimized better than the
original function literal.
However, the second LSym was named simply as any other function
literal appearing literally in the enclosing function would be named.
E.g., if f has a closure "f.funcX", and f is inlined into g, we would
create "g.funcY" (N.B., X and Y need not be the same.). Users then
have no idea this function originally came from f.
With this CL, the inlined call stack is incorporated into the clone
LSym's name: instead of "g.funcY", it's named "g.f.funcY".
In the future, it seems desirable to arrange for the clone's name to
appear exactly as the original name, so stack traces remain the same
as when -l or -d=inlfuncswithclosures are used. But it's unclear
whether the linker supports that today, or whether any downstream
tooling would be confused by this.
Updates #60324.
Change-Id: Ifad0ccef7e959e72005beeecdfffd872f63982f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/497137
Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Retrying the original CL with a small modification. The original CL
did not handle the case of reading an itab out of a dictionary
correctly. When we read an itab out of a dictionary, we must treat
the type inside that itab as maybe being put in an interface.
Original CL: 486895
Revert CL: 490156
Change-Id: Id2dc1699d184cd8c63dac83986a70b60b4e6cbd7
Reviewed-on: https://go-review.googlesource.com/c/go/+/491495
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This enables the implementation for proposal #58671, which is
a likely accept. By enabling it early we get a bit extra soak
time for this feature. The change can be reverted trivially, if
need be.
For #58671.
Change-Id: Id6c27515e45ff79f4f1d2fc1706f3f672ccdd1ab
Reviewed-on: https://go-review.googlesource.com/c/go/+/495955
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In the types1 universe, we only need to represent value types. For
interfaces, this means we only need to worry about pure interfaces. A
pure interface can embed a union type, but the overall union must be
equivalent to "any".
In go.dev/cl/458619, we changed the types1 reader to return "any", but
to incorporate a consistency check to make sure this is valid.
Unfortunately, a pure interface can actually still reference impure
interfaces, and in general this is hard to check precisely without
reimplementing a lot of types2 data structures and logic into types1.
We haven't had any other reports of this check failing since 1.20, so
it seems simplest to just suppress for now.
Fixes#60117.
Change-Id: I5053faafe2d1068c6d438b2193347546bf5330cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/495455
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Be more liberal about expanding the OR tree. Handle any tree shape
instead of a fully left or right associative tree.
Also remove tail feature, it isn't ever needed.
Change-Id: If16bebef94b952a604d6069e9be3d9129994cb6f
Reviewed-on: https://go-review.googlesource.com/c/go/+/494056
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ryan Berger <ryanbberger@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
[This is a roll-forward of CL 458755, which was reverted due to make.bash
being broken on GOAMD64=v3. But it turned out that the problem was caused
by wrong bswap/load rewrite rules, and it was fixed in CL 492616.]
This CL enhances the tighten pass. Previously if a value has memory arg,
then the tighten pass won't move it, actually if the memory state is
consistent among definition and use block, we can move the value. This
CL optimizes this case. This is useful for the following situation:
b1:
x = load(...mem)
if(...) goto b2 else b3
b2:
use(x)
b3:
some_op_not_use_x
For the micro-benchmark mentioned in #56620, the performance improvement
is about 15%.
There's no noticeable performance change in the go1 benchmark.
Fixes#56620
Change-Id: I36ea68bed384986cd3ae81cb9e6efe84bb213adc
Reviewed-on: https://go-review.googlesource.com/c/go/+/492895
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Eric Fang <eric.fang@arm.com>
This modifies some existing rules to allow more prefixed instructions
to be generated when using GOPPC64=power10. Some rules also check
if PCRel is available, which is currently supported for linux/ppc64le
and linux/ppc64 (internal linking only).
Prior to p10, DS-offset loads and stores had a 16 bit size limit for
the offset field. If the offset of the data for load or store was
beyond this range then an indexed load or store would be selected by
the rules.
In p10 the assembler can generate prefixed instructions in this case,
but does not if an indexed instruction was selected during the lowering
pass.
This allows many more cases to use prefixed loads or stores, reducing
function sizes and improving performance in some cases where the code
change happens in key loops.
For example in strconv BenchmarkAppendQuoteRune before:
12c5e4: 15 00 10 06 pla r10,1425660
12c5e8: fc c0 40 39
12c5ec: 00 00 6a e8 ld r3,0(r10)
12c5f0: 10 00 aa e8 ld r5,16(r10)
After this change:
12a828: 15 00 10 04 pld r3,1433272
12a82c: b8 de 60 e4
12a830: 15 00 10 04 pld r5,1433280
12a834: c0 de a0 e4
Performs better in the second case.
A testcase was added to verify that the rules correctly select a load or
store based on the offset and whether power10 or earlier.
Change-Id: I4335fed0bd9b8aba8a4f84d69b89f819cc464846
Reviewed-on: https://go-review.googlesource.com/c/go/+/477398
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Archana Ravindar <aravind5@in.ibm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Paul Murphy <murp@ibm.com>
With CL 408826 reflect.Value does not always escape. We need to
make sure Value operations does (or does not) escape the Value
correctly. This CL adds a test.
There are still a few unfortunate cases, where some Value
operations escape more than necessary (comparing to a non-reflect
version of the code), but hard to fix. These are mostly that a
Value would escape conditionally (mostly on the type of the Value),
but currently we don't have a good way to express that.
Change-Id: I9fdfc7584670aa09c5a01f6b2803f2043aaddb65
Reviewed-on: https://go-review.googlesource.com/c/go/+/441938
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Types are either static (for compiler-created types) or heap
allocated and always reachable (for reflection-created types, held
in the central map). So there is no need to escape types.
With CL 408826 reflect.Value does not always escape. Some functions
that escapes Value.typ would make the Value escape without this CL.
Had to add a special case for the inliner to keep (*Value).Type
still inlineable.
Change-Id: I7c14d35fd26328347b509a06eb5bd1534d40775f
Reviewed-on: https://go-review.googlesource.com/c/go/+/413474
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The effect and motivation is for the test to be selected when doing
'go test cmd' and not when doing 'go test std' since it's primarily
about testing the Go compiler and linker. Other than that, it's run
by all.bash and 'go test std cmd' as before.
For #56844.
Fixes#60059.
Change-Id: I2d499af013f9d9b8761fdf4573f8d27d80c1fccf
Reviewed-on: https://go-review.googlesource.com/c/go/+/493876
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Russ added test/bench/go1 in CL 5484071 to have a stable suite of
programs to use as benchmarks. For the compiler and runtime we had
back then, those were reasonable benchmarks, but the compiler and
runtime are now far more sophisticated and these benchmarks no longer
have good coverage. We also now have better benchmark suites
maintained outside the repo (e.g., golang.org/x/benchmarks). Keeping
test/bench/go1 at this point is actively misleading.
Indirectly related to #37486, as this also removes the last package
dist test runs outside of src/.
Change-Id: I2867ef303fe48a02acce58ace4ee682add8acdbf
Reviewed-on: https://go-review.googlesource.com/c/go/+/494193
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
The test directory driver currently sets the GOOS/GOARCH environment
variables if they aren't set. This appears to be in service of a
single test, test/env.go, which was introduced in September 2008 along
with os.Getenv. It's not entirely clear what that test is even trying
to check, since runtime.GOOS isn't necessarily the same as $GOOS. We
keep the test around because golang.org/x/tools/go/ssa/interp uses it
as a test case, but we simplify the test and eliminate the need for
the driver to set GOOS/GOARCH.
Change-Id: I5acc0093b557c95d1f0a526d031210256a68222d
Reviewed-on: https://go-review.googlesource.com/c/go/+/493601
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Adds rules that rewrites statements such as ~P&~Q as ~(P|Q) and ~P|~Q as ~(P&Q), removing an extraneous instruction.
Change-Id: Icedb97df741680ddf9799df79df78657173aa500
GitHub-Last-Rev: f22e2350c9
GitHub-Pull-Request: golang/go#60018
Reviewed-on: https://go-review.googlesource.com/c/go/+/493175
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Stefan M <st3f4nm4d4@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Thanks to the recent addition of the memcombine pass, the
ppc64 ports now have the memcombine optimizations. Previously
in PPC64.rules, the memcombine rules were only added for
ppc64le targets due to the significant increase in size of
the rewritePPC64.go file when those rules were added. The
ppc64 and ppc64le rules had to be different because of the
byte order due to endianness differences.
This enables the memcombine tests to be run on ppc64 as well
as ppc64le.
Change-Id: I4081e2d94617a1b66541d536c0c2662e266c9c1e
Reviewed-on: https://go-review.googlesource.com/c/go/+/492615
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Lynn Boger <laboger@linux.vnet.ibm.com>
[This is a roll-forward of CL 479095, which was reverted due to a bad
interaction between inlining and escape analysis, then later fixed
first with an attempt in CL 482355, then again in CL 484859, and then
one more time with CL 492135.]
Currently, when the inliner is determining if a function is
inlineable, it descends into the bodies of closures constructed by
that function. This has several unfortunate consequences:
- If the closure contains a disallowed operation (e.g., a defer), then
the outer function can't be inlined. It makes sense that the
*closure* can't be inlined in this case, but it doesn't make sense
to punish the function that constructs the closure.
- The hairiness of the closure counts against the inlining budget of
the outer function. Since we currently copy the closure body when
inlining the outer function, this makes sense from the perspective
of export data size and binary size, but ultimately doesn't make
much sense from the perspective of what should be inlineable.
- Since the inliner walks into every closure created by an outer
function in addition to starting a walk at every closure, this adds
an n^2 factor to inlinability analysis.
This CL simply drops this behavior.
In std, this makes 57 more functions inlinable, and disallows inlining
for 10 (due to the basic instability of our bottom-up inlining
approach), for an net increase of 47 inlinable functions (+0.6%).
This will help significantly with the performance of the functions to
be added for #56102, which have a somewhat complicated nesting of
closures with a performance-critical fast path.
The downside of this seems to be a potential increase in export data
and text size, but the practical impact of this seems to be
negligible:
│ before │ after │
│ bytes │ bytes vs base │
Go/binary 15.12Mi ± 0% 15.14Mi ± 0% +0.16% (n=1)
Go/text 5.220Mi ± 0% 5.237Mi ± 0% +0.32% (n=1)
Compile/binary 22.92Mi ± 0% 22.94Mi ± 0% +0.07% (n=1)
Compile/text 8.428Mi ± 0% 8.435Mi ± 0% +0.08% (n=1)
Change-Id: I5f75fcceb177f05853996b75184a486528eafe96
Reviewed-on: https://go-review.googlesource.com/c/go/+/492017
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
If the function referenced by a closure expression is incorporated
into a static init, be sure to mark it as non-hidden, since otherwise
it will be live but no longer reachable from the init func, hence it
will be skipped during escape analysis, which can lead to
miscompilations.
Fixes#59680.
Change-Id: Ib858aee296efcc0b7655d25c23ab8a6a8dbdc5f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/492135
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
