Missed a case; just need to call validateType.
Fixes#10800.
Change-Id: I81997ca7a9feb1be31c8b47e631b32712d7ffb86
Reviewed-on: https://go-review.googlesource.com/10031
Reviewed-by: Andrew Gerrand <adg@golang.org>
This reduces the depth of the inlining at a particular call site.
The inliner introduces many temporary variables, and the compiler can do
a better job with fewer. Being verbose in the bodies of these helper functions
seems like a reasonable tradeoff: the uses are still just as readable, and
they run faster in some important cases.
Change-Id: I5323976ed3704d0acd18fb31176cfbf5ba23a89c
Reviewed-on: https://go-review.googlesource.com/9883
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
BenchmarkSkipValue was sensitive to the value of
b.N due to its significant startup cost.
Two adjacent runs before this CL:
BenchmarkSkipValue 50 21047499 ns/op 93.37 MB/s
BenchmarkSkipValue 100 17260554 ns/op 118.05 MB/s
After this CL, using benchtime to recreate the
difference in b.N:
BenchmarkSkipValue 50 15204797 ns/op 131.67 MB/s
BenchmarkSkipValue 100 15332319 ns/op 130.58 MB/s
Change-Id: Iac86f86dd774d535302fa5e4c08f89f8da00be9e
Reviewed-on: https://go-review.googlesource.com/10053
Reviewed-by: Andrew Gerrand <adg@golang.org>
The Transport's writer to the remote server is wrapped in a
bufio.Writer to suppress many small writes while writing headers and
trailers. However, when writing the request body, the buffering may get
in the way if the request body is arriving slowly.
Because the io.Copy from the Request.Body to the writer is already
buffered, the outer bufio.Writer is unnecessary and prevents small
Request.Body.Reads from going to the server right away. (and the
io.Reader contract does say to return when you've got something,
instead of blocking waiting for more). After the body is finished, the
Transport's bufio.Writer is still used for any trailers following.
A previous attempted fix for this made the chunk writer always flush
if the underlying type was a bufio.Writer, but that is not quite
correct. This CL instead makes it opt-in by using a private sentinel
type (wrapping a *bufio.Writer) to the chunk writer that requests
Flushes after each chunk body (the chunk header & chunk body are still
buffered together into one write).
Fixes#6574
Change-Id: Icefcdf17130c9e285c80b69af295bfd3e72c3a70
Reviewed-on: https://go-review.googlesource.com/10021
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I was previously setting GOARM=arm5 (due to confusion with previously
seeing buildall.sh's temporary of "arm5" as a GOARCH and
misremembernig), but GOARM=arm5 was acting like GOARM=5 only on
accident. See https://go-review.googlesource.com/#/c/10023/
Instead, fail if GOARM is not a known value.
Change-Id: I9ba4fd7268df233d40b09f0431f37cd85a049847
Reviewed-on: https://go-review.googlesource.com/10024
Reviewed-by: Minux Ma <minux@golang.org>
'env' command is not available on some android devices.
Change-Id: I68b1152ef7ea248c8e80c7f71e97da76e3ec6394
Reviewed-on: https://go-review.googlesource.com/9999
Reviewed-by: Minux Ma <minux@golang.org>
Was otherwise absent unless bound to an exported symbol,
as in the BUG with strings.Title.
Fixes#10781.
Change-Id: I1543137073a9dee9e546bc9d648ca54fc9632dde
Reviewed-on: https://go-review.googlesource.com/9899
Reviewed-by: Russ Cox <rsc@golang.org>
The spec explains later in the "Operator precedence" section that *
has a higher precedence than +, but the current production rule
requires that "1 + 2 * 3" be parsed as "(1 + 2) * 3", instead of the
intended "1 + (2 * 3)".
The new production rule better matches cmd/internal/gc/go.y's grammar:
expr:
uexpr
| expr LOROR expr
| expr LANDAND expr
| ...
Fixes#10151.
Change-Id: I13c9635d6ddf1263cafe7cc63e68f3e5779e24ba
Reviewed-on: https://go-review.googlesource.com/9163
Reviewed-by: Robert Griesemer <gri@golang.org>
Set overflowing integer constants to 1 rather than 0 to avoid
spurious div-zero errors in subsequent constant expressions.
Also: Exclude new test case from go/types test since it's
running too long (go/types doesn't have an upper constant
size limit at the moment).
Fixes#7746.
Change-Id: I3768488ad9909a3cf995247b81ee78a8eb5a1e41
Reviewed-on: https://go-review.googlesource.com/9165
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
One important use case is a pipeline computation that pass values
from one Goroutine to the next and then exits or is placed in a
wait state. If GOMAXPROCS > 1 a Goroutine running on P1 will enable
another Goroutine and then immediately make P1 available to execute
it. We need to prevent other Ps from stealing the G that P1 is about
to execute. Otherwise the Gs can thrash between Ps causing unneeded
synchronization and slowing down throughput.
Fix this by changing the stealing logic so that when a P attempts to
steal the only G on some other P's run queue, it will pause
momentarily to allow the victim P to schedule the G.
As part of optimizing stealing we also use a per P victim queue
move stolen gs. This eliminates the zeroing of a stack local victim
queue which turned out to be expensive.
This CL is a necessary but not sufficient prerequisite to changing
the default value of GOMAXPROCS to something > 1 which is another
CL/discussion.
For highly serialized programs, such as GoroutineRing below this can
make a large difference. For larger and more parallel programs such
as the x/benchmarks there is no noticeable detriment.
~/work/code/src/rsc.io/benchstat/benchstat old.txt new.txt
name old mean new mean delta
GoroutineRing 30.2µs × (0.98,1.01) 30.1µs × (0.97,1.04) ~ (p=0.941)
GoroutineRing-2 113µs × (0.91,1.07) 30µs × (0.98,1.03) -73.17% (p=0.004)
GoroutineRing-4 144µs × (0.98,1.02) 32µs × (0.98,1.01) -77.69% (p=0.000)
GoroutineRingBuf 32.7µs × (0.97,1.03) 32.5µs × (0.97,1.02) ~ (p=0.795)
GoroutineRingBuf-2 120µs × (0.92,1.08) 33µs × (1.00,1.00) -72.48% (p=0.004)
GoroutineRingBuf-4 138µs × (0.92,1.06) 33µs × (1.00,1.00) -76.21% (p=0.003)
The bench benchmarks show little impact.
old new
garbage 7032879 7011696
httpold 25509 25301
splayold 1022073 1019499
jsonold 28230624 28081433
Change-Id: I228c48fed8d85c9bbef16a7edc53ab7898506f50
Reviewed-on: https://go-review.googlesource.com/9872
Reviewed-by: Austin Clements <austin@google.com>
FileConn and FilePacketConn APIs accept user-configured socket
descriptors to make them work together with runtime-integrated network
poller, but there's a limitation. The APIs reject protocol sockets that
are not supported by standard library. It's very hard for the net,
syscall packages to look after all platform, feature-specific sockets.
This change allows various platform, feature-specific socket descriptors
to use runtime-integrated network poller by using SocketConn,
SocketPacketConn APIs that bridge between the net, syscall packages and
platforms.
New exposed APIs:
pkg net, func SocketConn(*os.File, SocketAddr) (Conn, error)
pkg net, func SocketPacketConn(*os.File, SocketAddr) (PacketConn, error)
pkg net, type SocketAddr interface { Addr, Raw }
pkg net, type SocketAddr interface, Addr([]uint8) Addr
pkg net, type SocketAddr interface, Raw(Addr) []uint8
Fixes#10565.
Change-Id: Iec57499b3d84bb5cb0bcf3f664330c535eec11e3
Reviewed-on: https://go-review.googlesource.com/9275
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If __LP64__ is defined then the type "long" is 64-bits, and there is
no need to explicitly request _FILE_OFFSET_BITS == 64. This changes
the definitions of F_GETLK, F_SETLK, and F_SETLKW on PPC to the values
that the kernel requires. The values used in C when _FILE_OFFSET_BITS
== 64 are corrected by the glibc fcntl function before making the
system call.
With this change, regenerate ppc64le files on Ubuntu trusty.
Change-Id: I8dddbd8a6bae877efff818f5c5dd06291ade3238
Reviewed-on: https://go-review.googlesource.com/9962
Reviewed-by: Minux Ma <minux@golang.org>
On android the generated header files are located in
pkg/$(go env GOOS)_$(go env GOARCH)_testcshared.
The test was broken since https://go-review.googlesource.com/9798.
The installation path differs based on codegenArgs
(around src/cmd/go/build.go line 389), and the codegenArgs
is platform dependent.
Change-Id: I01ae9cb957fb7676e399f3b8c067f24c5bd20b9d
Reviewed-on: https://go-review.googlesource.com/9980
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This will skip system call numbers that are ifdef'ed out in unistd.h,
as occurs on PPC.
Change-Id: I88e640e4621c7a8cc266433f34a7b4be71543ec9
Reviewed-on: https://go-review.googlesource.com/9966
Reviewed-by: Minux Ma <minux@golang.org>
Running these tests on the system stack is problematic because they
allocate Ps, which are large enough to overflow the system stack if
they are stack-allocated. It used to be necessary to run these tests
on the system stack because they were written in C, but since this is
no longer the case, we can fix this problem by simply not running the
tests on the system stack.
This also means we no longer need the hack in one of these tests that
forces the allocated Ps to escape to the heap, so eliminate that as
well.
Change-Id: I9064f5f8fd7f7b446ff39a22a70b172cfcb2dc57
Reviewed-on: https://go-review.googlesource.com/9923
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
The line in cgen.go was lost during the ginscmp CL.
The ggen.go change is not strictly necessary, but
it makes the 5g -S output for x[0] match what it said
before the ginscmp CL.
Change-Id: I5890a9ec1ac69a38509416eda5aea13b8b12b94a
Reviewed-on: https://go-review.googlesource.com/9929
Reviewed-by: Russ Cox <rsc@golang.org>
Fix bug on Linux SysProcAttr handling: setting both Pdeathsig and
Credential caused Pdeathsig to be ignored. This is because the kernel
clears the deathsignal field when performing a setuid/setgid
system call.
Avoid this by moving Pdeathsig handling after Credential handling.
Fixes#9686
Change-Id: Id01896ad4e979b8c448e0061f00aa8762ca0ac94
Reviewed-on: https://go-review.googlesource.com/3290
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The code generated for x = append(x, v) is roughly:
t := x
if len(t)+1 > cap(t) {
t = grow(t)
}
t[len(t)] = v
len(t)++
x = t
We used to generate this code as Go pseudocode during walk.
Generate it instead as actual instructions during gen.
Doing so lets us apply a few optimizations. The most important
is that when, as in the above example, the source slice and the
destination slice are the same, the code can instead do:
t := x
if len(t)+1 > cap(t) {
t = grow(t)
x = {base(t), len(t)+1, cap(t)}
} else {
len(x)++
}
t[len(t)] = v
That is, in the fast path that does not reallocate the array,
only the updated length needs to be written back to x,
not the array pointer and not the capacity. This is more like
what you'd write by hand in C. It's faster in general, since
the fast path elides two of the three stores, but it's especially
faster when the form of x is such that the base pointer write
would turn into a write barrier. No write, no barrier.
name old mean new mean delta
BinaryTree17 5.68s × (0.97,1.04) 5.81s × (0.98,1.03) +2.35% (p=0.023)
Fannkuch11 4.41s × (0.98,1.03) 4.35s × (1.00,1.00) ~ (p=0.090)
FmtFprintfEmpty 92.7ns × (0.91,1.16) 86.0ns × (0.94,1.11) -7.31% (p=0.038)
FmtFprintfString 281ns × (0.96,1.08) 276ns × (0.98,1.04) ~ (p=0.219)
FmtFprintfInt 288ns × (0.97,1.06) 274ns × (0.98,1.06) -4.94% (p=0.002)
FmtFprintfIntInt 493ns × (0.97,1.04) 506ns × (0.99,1.01) +2.65% (p=0.009)
FmtFprintfPrefixedInt 423ns × (0.97,1.04) 391ns × (0.99,1.01) -7.52% (p=0.000)
FmtFprintfFloat 598ns × (0.99,1.01) 566ns × (0.99,1.01) -5.27% (p=0.000)
FmtManyArgs 1.89µs × (0.98,1.05) 1.91µs × (0.99,1.01) ~ (p=0.231)
GobDecode 14.8ms × (0.98,1.03) 15.3ms × (0.99,1.02) +3.01% (p=0.000)
GobEncode 12.3ms × (0.98,1.01) 11.5ms × (0.97,1.03) -5.93% (p=0.000)
Gzip 656ms × (0.99,1.05) 645ms × (0.99,1.01) ~ (p=0.055)
Gunzip 142ms × (1.00,1.00) 142ms × (1.00,1.00) -0.32% (p=0.034)
HTTPClientServer 91.2µs × (0.97,1.04) 90.5µs × (0.97,1.04) ~ (p=0.468)
JSONEncode 32.6ms × (0.97,1.08) 32.0ms × (0.98,1.03) ~ (p=0.190)
JSONDecode 114ms × (0.97,1.05) 114ms × (0.99,1.01) ~ (p=0.887)
Mandelbrot200 6.11ms × (0.98,1.04) 6.04ms × (1.00,1.01) ~ (p=0.167)
GoParse 6.66ms × (0.97,1.04) 6.47ms × (0.97,1.05) -2.81% (p=0.014)
RegexpMatchEasy0_32 159ns × (0.99,1.00) 171ns × (0.93,1.07) +7.19% (p=0.002)
RegexpMatchEasy0_1K 538ns × (1.00,1.01) 550ns × (0.98,1.01) +2.30% (p=0.000)
RegexpMatchEasy1_32 138ns × (1.00,1.00) 135ns × (0.99,1.02) -1.60% (p=0.000)
RegexpMatchEasy1_1K 869ns × (0.99,1.01) 879ns × (1.00,1.01) +1.08% (p=0.000)
RegexpMatchMedium_32 252ns × (0.99,1.01) 243ns × (1.00,1.00) -3.71% (p=0.000)
RegexpMatchMedium_1K 72.7µs × (1.00,1.00) 70.3µs × (1.00,1.00) -3.34% (p=0.000)
RegexpMatchHard_32 3.85µs × (1.00,1.00) 3.82µs × (1.00,1.01) -0.81% (p=0.000)
RegexpMatchHard_1K 118µs × (1.00,1.00) 117µs × (1.00,1.00) -0.56% (p=0.000)
Revcomp 920ms × (0.97,1.07) 917ms × (0.97,1.04) ~ (p=0.808)
Template 129ms × (0.98,1.03) 114ms × (0.99,1.01) -12.06% (p=0.000)
TimeParse 619ns × (0.99,1.01) 622ns × (0.99,1.01) ~ (p=0.062)
TimeFormat 661ns × (0.98,1.04) 665ns × (0.99,1.01) ~ (p=0.524)
See next CL for combination with a similar optimization for slice.
The benchmarks that are slower in this CL are still faster overall
with the combination of the two.
Change-Id: I2a7421658091b2488c64741b4db15ab6c3b4cb7e
Reviewed-on: https://go-review.googlesource.com/9812
Reviewed-by: David Chase <drchase@google.com>
This lets us abstract away which arguments can be constants and so on
and lets the back ends reverse the order of arguments if that helps.
Change-Id: I283ec1d694f2dd84eba22e5eb4aad78a2d2d9eb0
Reviewed-on: https://go-review.googlesource.com/9810
Reviewed-by: David Chase <drchase@google.com>
Messages that are too big are rejected when read, so they should
be rejected when written too.
Fixes#10518.
Change-Id: I96678fbe2d94f51b957fe26faef33cd8df3823dd
Reviewed-on: https://go-review.googlesource.com/9965
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The status buffer built by the exit function
was not nil-terminated.
Fixes#10789.
Change-Id: I2d34ac50a19d138176c4b47393497ba7070d5b61
Reviewed-on: https://go-review.googlesource.com/9953
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Once added to the signal queue, the pointer passed to the
signal handler could no longer be valid. Instead of passing
the pointer to the note string, we recopy the value of the
note string to a static array in the signal queue.
Fixes#10784.
Change-Id: Iddd6837b58a14dfaa16b069308ae28a7b8e0965b
Reviewed-on: https://go-review.googlesource.com/9950
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Today's earlier fix can stay, but it's a band-aid over the real problem,
which is that bad code was slipping through the type checker
into the back end (and luckily causing a type error there).
I discovered this because my new append does not use the same
temporaries and failed the test as written.
Fixes#9521.
Change-Id: I7e33e2ea15743406e15c6f3fdf73e1edecda69bd
Reviewed-on: https://go-review.googlesource.com/9921
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Any Git branch can be the default branch not only master. Removing
hardwired 'checkout master', and using 'checkout {tag}' is the best
choice. It works with and without a master branch. Furthermore it
resolves the Github default branch issue. Changing Github default
branch is effectively changing HEAD.
Fixes#9032
Change-Id: I19a1221bcefe0806e7556c124c6da7ac0c2160b5
Reviewed-on: https://go-review.googlesource.com/5312
Reviewed-by: Russ Cox <rsc@golang.org>
registry.ReadSubKeyNames requires QUERY access right in addition to
ENUMERATE_SUB_KEYS.
This was making TestLocalZoneAbbr fail on Windows 7 in Paris/Madrid
timezone. It succeeded on Windows 8 because timezone name changed from
"Paris/Madrid" to "Romance Standard Time", the latter being matched by
an abbrs entry.
Change-Id: I791287ba9d1b3556246fa4e9e1604a1fbba1f5e6
Reviewed-on: https://go-review.googlesource.com/9809
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
