The frontend does this for 32 bits and below, but SSA needs
to do it for 64 bits. The algorithms are all copied from
cgen.go:cgen_div.
Speeds up TimeFormat substantially: ~40% slower to ~10% slower.
Change-Id: I023ea2eb6040df98ccd9105e15ca6ea695610a7a
Reviewed-on: https://go-review.googlesource.com/19302
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
Use just a single write barrier flag test, even if there
are multiple pointer fields in a struct.
This helps move more of the wb-specific code (like the LEA
needed to materialize the write address) into the unlikely path.
Change-Id: Ic7a67145904369c4ff031e464d51267d71281c8f
Reviewed-on: https://go-review.googlesource.com/19085
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
If the output register is one of the input registers,
we can use a real add instead of LEA.
Change-Id: Ide58f1536afb077c0b939d3a8c7555807fd1c5e3
Reviewed-on: https://go-review.googlesource.com/19234
Reviewed-by: Alexandru Moșoi <alexandru@mosoi.ro>
When using a stack-allocated buffer for the result, don't
expose the uninitialized portion of it by restricting its
capacity to its length.
The other option is to zero the portion between len and cap.
That seems like more work, but might be worth it if the caller
then appends some stuff to the result. But this close to 1.6,
I'm inclined to do the simplest fix possible.
Fixes#14232
Change-Id: I21c50d3cda02fd2df4d60ba5e2cfe2efe272f333
Reviewed-on: https://go-review.googlesource.com/19231
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The plan9.bell-labs.com site has fallen into disrepair.
We'll instead use the site maintained by contributor David du Colombier.
Fixes#14233
Change-Id: I0c702e5d3b091cccd42b288ea32f34d507a4733d
Reviewed-on: https://go-review.googlesource.com/19240
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
* Enclose each rule's code in a for with no condition
* The loop is ran at most once because it's always terminated by a return.
* Use break when matching condition fails
* Drop rule hashes
* Shaves about 3 lines of code per rule
The binary size is not afected.
Change-Id: I27c3e40dc8cae98dcd50739342dc38db2ef9c247
Reviewed-on: https://go-review.googlesource.com/19220
Reviewed-by: Keith Randall <khr@golang.org>
Mostly indexed loads. A few more LEA cases.
Change-Id: Idc1d447ed0dd6e906cd48e70307a95e77f61cf5f
Reviewed-on: https://go-review.googlesource.com/19172
Reviewed-by: Todd Neal <todd@tneal.org>
Run-TryBot: Keith Randall <khr@golang.org>
LEAQ symbol+100(SB), AX
Under dynamic link, rewrites to
MOVQ symbol@GOT(SB), AX
ADDQ $100, AX
but ADDQ clobbers flags, whereas the original LEAQ (when not dynamic
linking) doesn't.
Use LEAQ instead of ADDQ to add that constant in so we preserve flags.
Change-Id: Ibb055403d94a4c5163e1c7d2f45da633ffd0b6a3
Reviewed-on: https://go-review.googlesource.com/19230
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Shaves about 3 lines per generated rule.
Change-Id: I94adc94ab79f90ac5fd033f896ece3b1eddf0f3d
Reviewed-on: https://go-review.googlesource.com/19197
Reviewed-by: Keith Randall <khr@golang.org>
Removes approx. one assignment per rule.
Change-Id: Ie9f0a7082ae12c4447ff6b4d40678cd92bdbb6f2
Reviewed-on: https://go-review.googlesource.com/19194
Reviewed-by: Keith Randall <khr@golang.org>
* Simplify comparisons of form a + const1 == const2 or a + const1 != const2.
* Canonicalize Eq, Neq, Add, Sub to have a constant as first argument.
Needed for the above new rules and helps constant folding.
Change-Id: I8078702a5daa706da57106073a3e9f640a67f486
Reviewed-on: https://go-review.googlesource.com/19192
Reviewed-by: Keith Randall <khr@golang.org>
Modify the simple domCheck to use the sparse tree code. This
speeds up compilation of one of the generated test cases from
1m48s to 17s.
Change-Id: If577410ee77b54918147a66917a8e3721297ee0a
Reviewed-on: https://go-review.googlesource.com/19187
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
libcurl sends this (despite never being standardized), and the Google
GFE rejects it with a 400 bad request (but only when over http2?).
So nuke it.
Change-Id: I3fc95523d50f33a0e23bb26b9195f70ab0aed0f4
Reviewed-on: https://go-review.googlesource.com/19184
Reviewed-by: Chris Broadfoot <cbro@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Previous flakes:
https://build.golang.org/log/223365dedb6b6aa0cfdf5afd0a50fd433a16badehttps://build.golang.org/log/edbea4cd3f24e707ef2ae8378559bb0fcc453c22
Dmitry says in email about this:
> The stack trace points to it pretty clearly. Done can indeed unblock
> Wait first and then panic. I guess we need to recover after first
> Done as well.
And it looks like TestWaitGroupMisuse2 was already hardened against
this. Do the same in TestWaitGroupMisuse3.
Change-Id: I317800c7e46f13c97873f0873c759a489dd5f47d
Reviewed-on: https://go-review.googlesource.com/19183
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The loading of zversion.go was expecting it to be in
package runtime, but it moved to runtime/internal/sys.
Worse, the load was not checking the error.
Update the path, check the error, add a test.
Fixes#14176.
Change-Id: I203c40afe1448875581415d5e42c29f09b14545d
Reviewed-on: https://go-review.googlesource.com/19180
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
RFC Errata 4522 (http://www.rfc-editor.org/errata_search.php?eid=4522)
notes that RFC 2616 had a typo in a list of headers that the
httputil.ReverseProxy code copied. Fix the typo in our code.
Fixes#14174
Change-Id: Ifc8f18fd58a6508a02a23e54ff3c473f03e521d3
Reviewed-on: https://go-review.googlesource.com/19133
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Move the cached sparse sets to the Config. I tested make.bash with
pre-allocating sets of size 150 and not caching very small sets, but the
difference between this implementation (no min size, no preallocation)
and a min size with preallocation was fairly negligible:
Number of sparse sets allocated:
Cached in Config w/none preallocated no min size 3684 *this CL*
Cached in Config w/three preallocated no min size 3370
Cached in Config w/three preallocated min size=150 3370
Cached in Config w/none preallocated min size=150 15947
Cached in Func, w/no min 96996 *previous code*
Change-Id: I7f9de8a7cae192648a7413bfb18a6690fad34375
Reviewed-on: https://go-review.googlesource.com/19152
Reviewed-by: Keith Randall <khr@golang.org>
This corrects a regression from Go 1.5 introduced by CL 18317.
Fixes#14185.
Change-Id: Ic3215714846d9f28809cd04e3eb3664b599244f4
Reviewed-on: https://go-review.googlesource.com/19151
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Add the aux type to opcodes.
Add rematerializeable as a flag.
Change-Id: I906e19281498f3ee51bb136299bf26e13a54b2ec
Reviewed-on: https://go-review.googlesource.com/19088
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
Converted working slices of pointer into slices of pointer
index. Half the size (on 64-bit machine) and no pointers
to trace if GC occurs while they're live.
TODO - could expose slice mapping ID->*Block; some dom
clients also construct these.
Minor optimization in regalloc that cuts allocation count.
Minor optimization in compile.go that cuts calls to Sprintf.
Change-Id: I28f0bfed422b7344af333dc52ea272441e28e463
Reviewed-on: https://go-review.googlesource.com/19104
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
Currently it's possible for the scheduler to deadlock with the right
confluence of locked Gs, assists, and scheduling of background mark
workers. Broadly, this happens because handoffp is stricter than
findrunnable, and if the only work for a P is GC work, handoffp will
put the P into idle, rather than starting an M to execute that P. One
way this can happen is as follows:
0. There is only one user G, which we'll call G 1. There is more than
one P, but they're all idle except the one running G 1.
1. G 1 locks itself to an M using runtime.LockOSThread.
2. GC starts up and enters mark 1.
3. G 1 performs a GC assist, which completes mark 1 without being
fully satisfied. Completing mark 1 causes all background mark
workers to park. And since the assist isn't fully satisfied, it
parks as well, waiting for a background mark worker to satisfy its
remaining assist debt.
4. The assist park enters the scheduler. Since G 1 is locked to the M,
the scheduler releases the P and calls handoffp to hand the P to
another M.
5. handoffp checks the local and global run queues, which are empty,
and sees that there are idle Ps, so rather than start an M, it puts
the P into idle.
At this point, all of the Gs are waiting and all of the Ps are idle.
In particular, none of the GC workers are running, so no mark work
gets done and the assist on the main G is never satisfied, so the
whole process soft locks up.
Fix this by making handoffp start an M if there is GC work. This
reintroduces a key invariant: that in any situation where findrunnable
would return a G to run on a P, handoffp for that P will start an M to
run work on that P.
Fixes#13645.
Tested by running 2,689 iterations of `go tool dist test -no-rebuild
runtime:cpu124` across 10 linux-amd64-noopt VMs with no failures.
Without this change, the failure rate was somewhere around 1%.
Performance change is negligible.
name old time/op new time/op delta
XBenchGarbage-12 2.48ms ± 2% 2.48ms ± 1% -0.24% (p=0.000 n=92+93)
name old time/op new time/op delta
BinaryTree17-12 2.86s ± 2% 2.87s ± 2% ~ (p=0.667 n=19+20)
Fannkuch11-12 2.52s ± 1% 2.47s ± 1% -2.05% (p=0.000 n=18+20)
FmtFprintfEmpty-12 51.7ns ± 1% 51.5ns ± 3% ~ (p=0.931 n=16+20)
FmtFprintfString-12 170ns ± 1% 168ns ± 1% -0.65% (p=0.000 n=19+19)
FmtFprintfInt-12 160ns ± 0% 160ns ± 0% +0.18% (p=0.033 n=17+19)
FmtFprintfIntInt-12 265ns ± 1% 273ns ± 1% +2.98% (p=0.000 n=17+19)
FmtFprintfPrefixedInt-12 235ns ± 1% 239ns ± 1% +1.99% (p=0.000 n=16+19)
FmtFprintfFloat-12 315ns ± 0% 315ns ± 1% ~ (p=0.250 n=17+19)
FmtManyArgs-12 1.04µs ± 1% 1.05µs ± 0% +0.87% (p=0.000 n=17+19)
GobDecode-12 7.93ms ± 0% 7.85ms ± 1% -1.03% (p=0.000 n=16+18)
GobEncode-12 6.62ms ± 1% 6.58ms ± 1% -0.60% (p=0.000 n=18+19)
Gzip-12 322ms ± 1% 320ms ± 1% -0.46% (p=0.009 n=20+20)
Gunzip-12 42.5ms ± 1% 42.5ms ± 0% ~ (p=0.751 n=19+19)
HTTPClientServer-12 69.7µs ± 1% 70.0µs ± 2% ~ (p=0.056 n=19+19)
JSONEncode-12 16.9ms ± 1% 16.7ms ± 1% -1.13% (p=0.000 n=19+19)
JSONDecode-12 61.5ms ± 1% 61.3ms ± 1% -0.35% (p=0.001 n=20+17)
Mandelbrot200-12 3.94ms ± 0% 3.91ms ± 0% -0.67% (p=0.000 n=20+18)
GoParse-12 3.71ms ± 1% 3.70ms ± 1% ~ (p=0.244 n=17+19)
RegexpMatchEasy0_32-12 101ns ± 1% 102ns ± 2% +0.54% (p=0.037 n=19+20)
RegexpMatchEasy0_1K-12 349ns ± 0% 350ns ± 0% +0.33% (p=0.000 n=17+18)
RegexpMatchEasy1_32-12 84.5ns ± 2% 84.2ns ± 1% -0.43% (p=0.048 n=19+20)
RegexpMatchEasy1_1K-12 510ns ± 1% 513ns ± 2% +0.58% (p=0.002 n=18+20)
RegexpMatchMedium_32-12 132ns ± 1% 134ns ± 1% +0.95% (p=0.000 n=20+20)
RegexpMatchMedium_1K-12 40.1µs ± 1% 39.6µs ± 1% -1.39% (p=0.000 n=20+20)
RegexpMatchHard_32-12 2.08µs ± 0% 2.06µs ± 1% -0.95% (p=0.000 n=18+18)
RegexpMatchHard_1K-12 62.2µs ± 1% 61.9µs ± 1% -0.42% (p=0.001 n=19+20)
Revcomp-12 537ms ± 0% 536ms ± 0% ~ (p=0.076 n=20+20)
Template-12 71.3ms ± 1% 69.3ms ± 1% -2.75% (p=0.000 n=20+20)
TimeParse-12 361ns ± 0% 360ns ± 1% ~ (p=0.056 n=19+19)
TimeFormat-12 353ns ± 0% 352ns ± 0% -0.23% (p=0.000 n=17+18)
[Geo mean] 62.6µs 62.5µs -0.17%
Change-Id: I0fbbbe4d7d99653ba5600ffb4394fa03558bc4e9
Reviewed-on: https://go-review.googlesource.com/19107
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates x/net/http2 to git rev 644ffc for three CLs since the last update:
http2: don't add *Response to activeRes in Transport on Headers.END_STREAM
https://golang.org/cl/19134
http2: add mechanism to send undeclared Trailers mid handler
https://golang.org/cl/19131
http2: remove unused variable
https://golang.org/cl/18936
The first in the list above is the main fix that's necessary. The
other are two are in the git history but along for the cmd/bundle
ride. The middle CL is well-tested, small (mostly comments),
non-tricky, and almost never seen (since nobody really uses Trailers).
The final CL is just deleting an unused global variable.
Fixes#14084 again (with more tests)
Change-Id: Iac51350acee9c51d32bf7779d57e9d5a5482b928
Reviewed-on: https://go-review.googlesource.com/19135
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Tested by hand with a runtime/cgo modified to return an mmap failure
after 10 calls.
This is an interim patch. For 1.7 we should fix mmap properly to avoid
using the same value as both a pointer and an errno value.
Fixes#14149.
Change-Id: I8f2bbd47d711e283001ba73296f1c34a26c59241
Reviewed-on: https://go-review.googlesource.com/19084
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
These changes were left out of the 1cc5789df9 commit.
Change-Id: Id7f49973da281a567b69228dbaea31846b82b4af
Reviewed-on: https://go-review.googlesource.com/19105
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Small optimizations I noticed while looking at Giovanni's test cases.
More shifts by constants.
Indexed stores for smaller types.
Fold LEA into loads/stores.
More extending loads.
CMP $0 of AND -> TEST
Fix order of TEST ops.
Giovanni's test cases at https://gist.github.com/rasky/62fba94e3a20d1b05b2a
Change-Id: I7077bc0b5319bf05767eeb39f401f4bb4b39f635
Reviewed-on: https://go-review.googlesource.com/19086
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
Reviewed-by: David Chase <drchase@google.com>
From memory profiling, about 3% reduction in allocation count.
Change-Id: I4b662d55b8a94fe724759a2b22f05a08d0bf40f8
Reviewed-on: https://go-review.googlesource.com/19103
Reviewed-by: Keith Randall <khr@golang.org>
We used to compare the init state with == to 0 and 2, which
requires 2 comparisons. Instead, compare with 1 and use
<, ==. That requires only one comparison.
This isn't a big deal performance-wise, as it is just init
code. But there is a fair amount of init code, so this
should help a bit with code size.
Change-Id: I4a2765f1005776f0edce28ac143f4b7596d95a68
Reviewed-on: https://go-review.googlesource.com/18948
Reviewed-by: David Chase <drchase@google.com>
Rename StoreConst to ValAndOff so we can use it for other ops.
Make ValAndOff print nicely.
Add some notes & checks related to my aborted attempt to
implement combined CMP+load ops.
Change-Id: I2f901d12d42bc5a82879af0334806aa184a97e27
Reviewed-on: https://go-review.googlesource.com/18947
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: David Chase <drchase@google.com>
The old write barriers used _nostore versions, which
don't work for Ian's cgo checker. Instead, we adopt the
same write barrier pattern as the default compiler.
It's a bit trickier to code up but should be more efficient.
Change-Id: I6696c3656cf179e28f800b0e096b7259bd5f3bb7
Reviewed-on: https://go-review.googlesource.com/18941
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Compiling && and || expressions often leads to control
flow of the following form:
p:
If a goto b else c
b: <- p ...
x = phi(a, ...)
If x goto t else u
Note that if we take the edge p->b, then we are guaranteed
to take the edge b->t also. So in this situation, we might
as well go directly from p to t.
Change-Id: I6974f1e6367119a2ddf2014f9741fdb490edcc12
Reviewed-on: https://go-review.googlesource.com/18910
Reviewed-by: David Chase <drchase@google.com>
This CL expands symlinks only when an error would be reported otherwise.
Since the expansions are only on error paths, anything that worked yesterday
should still work after this CL.
This CL fixes a regression from Go 1.5 in "go run", or else we'd probably
postpone it.
Changing only the error paths is meant as a way to reduce the risk of
making this change so late in the release cycle, but it may actually be
the right strategy for symlinks in general.
Fixes#14054.
Change-Id: I42ed1276f67a0c395297a62bcec7d36c14c06404
Reviewed-on: https://go-review.googlesource.com/19102
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For each value that needs to be in a fixed register at the end of the
block, and try to pick that fixed register when the instruction
generating that value is scheduled (or restored from a spill).
Just used for end-of-block register requirements for now.
Fixed-register instruction requirements (e.g. shift in ecx) can be
added later. Also two-instruction constraints (input reg == output
reg) might be recorded in a similar manner.
Change-Id: I59916e2e7f73657bb4fc3e3b65389749d7a23fa8
Reviewed-on: https://go-review.googlesource.com/18774
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
