Until recently, struct workbuf had only lfnode and uintptr fields
before the obj array to make it convenient to compute the size of the
obj array. It slowly grew more fields until this became inconvenient
enough that it was restructured to make the size computation easy.
Now the size computation doesn't care what the field types are, so
switch to more natural types.
Change-Id: I966140ba7ebb4aeb41d5c66d9d2a3bdc17dd4bcf
Reviewed-on: https://go-review.googlesource.com/5262
Reviewed-by: Russ Cox <rsc@golang.org>
This converts the garbage collector from directly manipulating work
buffers to using the new gcWork abstraction.
The previous management of work buffers was rather ad hoc. As a
result, switching to the gcWork abstraction changes many details of
work buffer management.
If greyobject fills a work buffer, it can now pull from work.partial
in addition to work.empty.
Previously, gcDrain started with a partial or empty work buffer and
fetched an empty work buffer if it filled its current buffer (in
greyobject). Now, gcDrain starts with a full work buffer and fetches
an partial or empty work buffer if it fills its current buffer (in
greyobject). The original behavior was bad because gcDrain would
immediately drop the empty work buffer returned by greyobject and
fetch a full work buffer, which greyobject was likely to immediately
overflow, fetching another empty work buffer, etc. The new behavior
isn't great at the start because greyobject is likely to immediately
overflow the full buffer, but the steady-state behavior should be more
stable. Both before and after this change, gcDrain fetches a full
work buffer if it drains its current buffer. Basically all of these
choices are bad; the right answer is to use a dual work buffer scheme.
Previously, shade always fetched a work buffer (though usually from
m.currentwbuf), even if the object was already marked. Now it only
fetches a work buffer if it actually greys an object.
Change-Id: I8b880ed660eb63135236fa5d5678f0c1c041881f
Reviewed-on: https://go-review.googlesource.com/5232
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
This introduces a producer/consumer abstraction for GC work pointers
that internally handles the details of filling, draining, and
shuffling work buffers.
In addition to simplifying the GC code, this should make it easy for
us to change how we use work buffers, including cleaning up how we use
the work.partial queue, reintroducing a FIFO lookahead cache, adding
prefetching, and using dual buffers to avoid flapping.
This commit doesn't change any existing code. The following commit
will switch the garbage collector from explicit workbuf manipulation
to gcWork.
Change-Id: Ifbfe5fff45bf0362d6d7c3cecb061f0c9874077d
Reviewed-on: https://go-review.googlesource.com/5231
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Fairly straightforward. A couple of unusual addressing tricks.
Also added the ability to write R(10) to mean R10. PPC64 uses
this for a couple of large register spaces. It appears for ARM now
as well, since I saw some uses of that before, although I rewrote
them in our source. I could put it in for 386 and amd64 but it's
not worth it.
Change-Id: I3ffd7ffa62d511b95b92c3c75b9f1d621f5393b6
Reviewed-on: https://go-review.googlesource.com/5282
Reviewed-by: Russ Cox <rsc@golang.org>
References to FP must now have a symbol.
Change-Id: I3f06b99cc48cbd4ccd6f23f2e4b0830af40f7f3d
Reviewed-on: https://go-review.googlesource.com/5281
Reviewed-by: Russ Cox <rsc@golang.org>
Oversight in 9a: did not set the static bit in the assembler for
symbols with <>.
Change-Id: Id508dcd3ed07733e60395aefa86d0035faab14a9
Reviewed-on: https://go-review.googlesource.com/5280
Reviewed-by: Russ Cox <rsc@golang.org>
Nit. There's no reason to take a uintptr and doing so just requires
casts in annoying places.
Change-Id: Ifeb9638c6d94eae619c490930cf724cc315680ba
Reviewed-on: https://go-review.googlesource.com/5230
Reviewed-by: Russ Cox <rsc@golang.org>
The comment previously was reversed in sense (it appeared to be
describing unmarshaling). I've fixed that, and added the caveat that map
keys are subject to UTF-8 coercion like other strings.
Change-Id: Id08082aa71401a6e7530a42f979fbb50bd1f4e6a
Reviewed-on: https://go-review.googlesource.com/5221
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
if their nominal Min and Max points differ.
This is a behavior change, but arguably a bug fix, as Eq wasn't
previously consistent with In, and the concept of a rectangle being a
set of points. This is demonstrated by the new geom_test.go test.
It does mean that r.Eq(s) no longer implies that Inset'ting both r and s
with a negative inset results in two rectangles that are still Eq, but
that seems acceptable to me.
The previous behavior is still available as "r == s".
Also clarify the image.Rect doc comment when the inputs are
non-canonical.
Also simplify the Point and Rectangle Eq implementations dating from
before Go 1.0, when you couldn't compare structs via the == operator.
Change-Id: Ic39e628db31dc5fe5220f4b444e6d5000eeace5b
Reviewed-on: https://go-review.googlesource.com/5006
Reviewed-by: Rob Pike <r@golang.org>
Env vars were incorrectly copying whole value of http.RemoteAddr
to REMOTE_ADDR and REMOTE_HOST. They contained IP:port pair which
instead should only have IP (RFC 3875, other sources).
Module also was not setting REMOTE_PORT variable which become de-facto
standard for passing TCP client port to CGI scripts (Apache mod_cgi,
IIS, and probably others)
Fixes#9861
Change-Id: Ia73e664c48539e3c7db4997d09d957884e98d8a5
Reviewed-on: https://go-review.googlesource.com/4933
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixed for the other assemblers in CL 2297042 in 2010.
Change-Id: I6cf41c569e884d98d295369e60e550ff8c0884e6
Reviewed-on: https://go-review.googlesource.com/5173
Reviewed-by: Rob Pike <r@golang.org>
In CL 3964, NULL was used instead of nil.
However, Plan 9 doesn't declare NULL.
Change-Id: Ied3850aca5c8bca5974105129a37d575df33f6ec
Reviewed-on: https://go-review.googlesource.com/5150
Reviewed-by: Minux Ma <minux@golang.org>
Fixes#8291
There were several complaints about closure names in the issue tracker.
The first problem is that you see names like net/http.func·001
in profiles, traces, etc. And there is no way to figure out what
is that function.
Another issue is non-US-ascii symbols. All programs out there
should accept UTF-8. But unfortunately it is not true in reality.
For example, less does not render middle dot properly.
This change prepends outer function name to closure name and
replaces middle dot with dot. Now names look like:
main.glob.func1
main.glob.func2
main.glob.func2.1
main.init.1
main.init.1.func1
main.init.1.func1.1
main.main.func1
main.main.func1.1
Change-Id: I725726af88f2ad3ced2e3450f0f06bf459fd91c0
Reviewed-on: https://go-review.googlesource.com/3964
Reviewed-by: Russ Cox <rsc@golang.org>
This will get fixed properly upstream, but this will serve for now.
Change-Id: I25e5210d190bc7a06a5b9f80724e3360d1a6b10c
Reviewed-on: https://go-review.googlesource.com/5121
Reviewed-by: Russ Cox <rsc@golang.org>
Require a name to be specified when referencing the pseudo-stack.
If you want a real stack offset, use the hardware stack pointer (e.g.,
R13 on arm), not SP.
Fix affected assembly files.
Change-Id: If3545f187a43cdda4acc892000038ec25901132a
Reviewed-on: https://go-review.googlesource.com/5120
Run-TryBot: Rob Pike <r@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Historically, yacc has supported various kinds of inspections
and manipulations of the parser state, exposed as global variables.
The Go implementation of yacc puts that state (properly) in local
stack variables, so it can only be exposed explicitly.
There is now an explicit parser type, yyParser, returned by a
constructor, yyNewParser.
type yyParser interface {
Parse(yyLexer) int
Lookahead() int
}
Parse runs a parse. A call to the top-level func Parse
is equivalent to calling yyNewParser().Parse, but constructing
the parser explicitly makes it possible to access additional
parser methods, such as Lookahead.
Lookahead can be called during grammar actions to read
(but not consume) the value of the current lookahead token,
as returned by yylex.Lex. If there is no current lookahead token,
Lookahead returns -1. Invoking Lookahead corresponds to
reading the global variable yychar in a traditional Unix yacc grammar.
To support Lookahead, the internal parsing code now separates
the return value from Lex (yychar) from the reencoding used
by the parsing tables (yytoken). This has the effect that grammars
that read yychar directly in the action (possible since the actions
are in the same function that declares yychar) now correctly see values
from the Lex return value space, not the internal reencoding space.
This can fix bugs in ported grammars not even using SetParse and Lookahead.
(The reencoding was added on Plan 9 for large character sets.
No Plan 9 programs using yacc looked at yychar.)
Other methods may be added to yyParser later as needed.
Obvious candidates include equivalents for the traditional
yyclearin and yyerrok macros.
Change-Id: Iaf7649efcf97e09f44d1f5bc74bb563a11f225de
Reviewed-on: https://go-review.googlesource.com/4850
Reviewed-by: Rob Pike <r@golang.org>
First draft of converted Go compiler, using rsc.io/c2go rev 83d795a.
Change-Id: I29f4c7010de07d2ff1947bbca9865879d83c32c3
Reviewed-on: https://go-review.googlesource.com/4851
Reviewed-by: Rob Pike <r@golang.org>
Set TYPE_BRANCH for x(PC) in the parser and the assembler has less work to do.
This also makes the operand test handle -4(PC) correctly.
Also add a special test case for AX:DX, which should be fixed in obj really.
Change-Id: If195e3a8cf3454a73508633e9b317d66030da826
Reviewed-on: https://go-review.googlesource.com/5071
Reviewed-by: Russ Cox <rsc@golang.org>
Generated by reducing all the amd64 operands in the core.
Will add 386 and ARM later; this is a trial balloon.
NOTE: There is at least one anomaly: AX:DX doesn't print correctly in this situation.
Change-Id: I9f327c1890b100e3edb7b1b2a1c01f3e4b798f43
Reviewed-on: https://go-review.googlesource.com/4967
Reviewed-by: Russ Cox <rsc@golang.org>
Apparently when ARM stops at a GDB breakpoint, it appears to be in
syscall.Syscall. The "info goroutines" test expected it to be in a
runtime function. Since this isn't fundamental to the test, simply
tweak the test's regexp to make sure "info goroutines" prints some
running goroutine with an active M, but don't require it to be in any
particular function.
Change-Id: Iba2618b46d3dc49cef62ffb72484b83ea7b0317d
Reviewed-on: https://go-review.googlesource.com/5060
Reviewed-by: Dave Cheney <dave@cheney.net>
All of the other memory-related source files start with "m". Keep up
the tradition.
Change-Id: Idd88fdbf2a1453374fa12109b949b1c4d149a4f8
Reviewed-on: https://go-review.googlesource.com/4853
Reviewed-by: Minux Ma <minux@golang.org>
Rather than reaching in to slices directly in the slice pretty
printer, use the newly introduced SliceValue wrapper.
Change-Id: Ibb25f8c618c2ffb3fe1a8dd044bb9a6a085df5b7
Reviewed-on: https://go-review.googlesource.com/4936
Reviewed-by: Minux Ma <minux@golang.org>
"info goroutines" is failing because it hasn't kept up with changes in
the 1.5 runtime. This fixes three issues preventing "info goroutines"
from working. allg is no longer a linked list, so switch to using the
allgs slice. The g struct's 'status' field is now called
'atomicstatus', so rename uses of 'status'. Finally, this was trying
to parse str(pc) as an int, but str(pc) can return symbolic
information after the raw hex value; fix this by stripping everything
after the first space.
This also adds a test for "info goroutines" to runtime-gdb_test, which
was previously quite skeletal.
Change-Id: I8ad83ee8640891cdd88ecd28dad31ed9b5833b7a
Reviewed-on: https://go-review.googlesource.com/4935
Reviewed-by: Minux Ma <minux@golang.org>
R15 is the real register. PC is a pseudo-register that we are making
illegal in this context as part of the grand assembly unification.
Change-Id: Ie0ea38ce7ef4d2cf4fcbe23b851a570fd312ce8d
Reviewed-on: https://go-review.googlesource.com/4966
Reviewed-by: Minux Ma <minux@golang.org>
Handle the special name of R10 on the ARM - it's g - when it appears
in a register list [R0, g, R3]. Also simplify the pseudo-register parsing
a little.
Should fix the ARM build.
Change-Id: Ifcafc8195dcd3622653b43663ced6e4a144a3e51
Reviewed-on: https://go-review.googlesource.com/4965
Reviewed-by: Russ Cox <rsc@golang.org>
Mishandled the complex addressing mode in masks<>(SB)(CX*8)
as a casualty of the ARM work. Fix by backing all the flows up to
the state where registerIndirect is always called with the input
sitting on the opening paren.
With this, build passes for me with linux-arm, linux-386, and linux-amd64.
Change-Id: I7cae69a6fa9b635c79efd93850bd1e744b22bc79
Reviewed-on: https://go-review.googlesource.com/4964
Reviewed-by: Russ Cox <rsc@golang.org>
A consequence of the ARM work overlooked that SP is a real register
on x86, so we need to detect it specially.
This will be done better soon, but this is a fast fix for the build.
Change-Id: Ia30d111c3f42a5f0b5f4eddd4cc4d8b10470c14f
Reviewed-on: https://go-review.googlesource.com/4963
Reviewed-by: Russ Cox <rsc@golang.org>
The tools have been fixed to not do this, but verifyAsm depends on this
being fixed.
TBR=rsc
Change-Id: Ia8968cc803b3498dfa2f98188c6ed1cf2e11c66d
Reviewed-on: https://go-review.googlesource.com/4962
Reviewed-by: Rob Pike <r@golang.org>
