On NetBSD and DragonFly a newly created thread inherits the signal stack
of the creating thread. This breaks horribly if both threads get a
signal at the same time. Fix this by dropping the signal stack in the
newly created thread. The right signal stack will then get installed
later.
Note that cgo code that calls pthread_create will have the wrong,
duplicated, signal stack in the newly created thread. I don't see any
way to fix that in Go. People using cgo to call pthread_create will
have to be aware of the problem.
Fixes#13945.
Fixes#13947.
Change-Id: I0c7bd2cdf9ada575d57182ca5e9523060de34931
Reviewed-on: https://go-review.googlesource.com/18814
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The TestInterfaceAddrsWithNetsh Windows unit test parses and compares the
output of the "netsh" command against more low level Windows API calls. In
at least two cases, some quirks of netsh cause these comparisons to fail.
One example appears to be wi-fi adapters. After a reboot, before it has
been allowed to connect to a network, netsh for IPv4 will not show an
address, whereas netsh for IPv6 will. If the interface is allowed to
connect, and then disconnected, netsh for IPv4 now shows an address and
the test will pass.
The fix is to not compare netsh output if the interface is down.
A related issue is that the IPv6 version of "netsh" can return an
IPv4-embedded IPv6 address where the IPv4 component of the address
is in decimal form, whilst the test is expecting hexadecimal form.
For example, output might be:
Address fe80::5efe:192.168.1.7%6 Parameters
...
Whilst this is valid notation, the fix is to recognise this format in the
"netsh" output and re-parse the address into the all-hexadecimal
representation that the test is expecting.
Fixes#13981
Change-Id: Ie8366673f4d43d07bad80d6d5d1d6e33f654b6cc
Reviewed-on: https://go-review.googlesource.com/18711
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The header was in the wrong place, so the definition of a pipeline
was not in the section labeled "Pipelines".
Fixes#13972
Change-Id: Ibca791a4511ca112047b57091c391f6e959fdd78
Reviewed-on: https://go-review.googlesource.com/18775
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
On HTTP redirect, the HTTP client creates a new request and don't copy
over the Cancel channel. This prevents any redirected request from being
cancelled.
Fixes#14053
Change-Id: I467cdd4aadcae8351b6e9733fc582b7985b8b9d3
Reviewed-on: https://go-review.googlesource.com/18810
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
https://golang.org/s/execmodes defines rules for how multiple codes of a go
package work when they end up in the address space of a single process, but
currently the linker blows up in this situation. Fix that by loading all .a
files before any .so files and ignoring duplicate symbols found when loading
shared libraries.
I know this is very very late for 1.6 but at least it should clearly not have
any effect when shared libraries are not in use.
Change-Id: I512ac912937e7502ff58eb5628b658ecce3c38e5
Reviewed-on: https://go-review.googlesource.com/18714
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
so that runtime/race tests are included in the race builder.
Update #14011.
Change-Id: I04ac6e47366fdb1fe84ba89da556c6d38f7d4a47
Reviewed-on: https://go-review.googlesource.com/18686
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
I'm not sure what the convert function was intended to be.
Fixes#14011
Change-Id: I29d905bc1827936b9433b20b13b7a0b0ac5f502e
Reviewed-on: https://go-review.googlesource.com/18712
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The linker already applies the fix for elf32, so this just extends it to elf64.
Inspired by https://github.com/pwaller/goupxFixes#13974
Change-Id: I65d92b5be9590657060a0e8e80ff5b86ba40017f
Reviewed-on: https://go-review.googlesource.com/18690
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The timeout means that TestSpecialDomainName will not hang if
the DNS server does not respond to the request.
Fixes#13939
Change-Id: I46e30bbd3c11b6c560656134e704331cf6f8af3f
Reviewed-on: https://go-review.googlesource.com/18661
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Both mips64 architectures share the same runtime/rt0 file, so
we have to hardcode them in buildall.bash.
Ideally we should have cmd/dist report all supported platforms,
see #12270.
Change-Id: I08ce35cfe0a831af5e1e8255b305efd38386fa52
Reviewed-on: https://go-review.googlesource.com/18687
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
No need to say "by default" because there is no alternative and no way
to override. Always HTTP/2.0 is officially spelled HTTP/2 these days.
Fixes#13985 harder
Change-Id: Ib1ec03cec171ca865342b8e7452cd4c707d7b770
Reviewed-on: https://go-review.googlesource.com/18720
Reviewed-by: Rob Pike <r@golang.org>
Fixes#14001
Change-Id: I6f9bc3028345081758d8f537c3aaddb2e254e69e
Reviewed-on: https://go-review.googlesource.com/18708
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is testing code in asm_GOARCH.s, so it's not necessary to run the
test on systems where it doesn't build.
Fixes#13991.
Change-Id: Ia7a2d3a34b32e6987dc67428c1e09e63baf0518a
Reviewed-on: https://go-review.googlesource.com/18707
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
GC assists check gcBlackenEnabled under the assist queue lock to avoid
going to sleep after gcWakeAllAssists has already woken all assists.
However, currently we clear gcBlackenEnabled shortly *after* waking
all assists, which opens a window where this exact race can happen.
Fix this by clearing gcBlackenEnabled before waking blocked assists.
However, it's unlikely this actually matters because the world is
stopped between waking assists and clearing gcBlackenEnabled and there
aren't any obvious allocations during this window, so I don't think an
assist could actually slip in to this race window.
Updates #13645.
Change-Id: I7571f059530481dc781d8fd96a1a40aadebecb0d
Reviewed-on: https://go-review.googlesource.com/18682
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Also adds missing nosplit to unminit.
Fixes#13964.
Change-Id: I07d93a8c872a255a89f91f808b66c889f0a6a69c
Reviewed-on: https://go-review.googlesource.com/18658
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If a user starts two HTTP requests when no http2 connection is
available, both end up creating new TCP connections, since the
server's protocol (h1 or h2) isn't yet known. Once it turns out that
the server supports h2, one of the connections is useless. Previously
we kept upgrading both TLS connections to h2 (SETTINGS frame exchange,
etc). Now the unnecessary connections are closed instead, before the
h2 preface/SETTINGS.
Updates x/net/http2 to git rev a8e212f3d for https://golang.org/cl/18675
This CL contains the tests for https://golang.org/cl/18675
Semi-related change noticed while writing the tests: now that we have
TLSNextProto in Go 1.6, which consults the TLS
ConnectionState.NegotiatedProtocol, we have to gurantee that the TLS
handshake has been done before we look at the ConnectionState. So add
that check after the DialTLS hook. (we never documented that users
have to call Handshake, so do it for them, now that it matters)
Updates #13957
Change-Id: I9a70e9d1282fe937ea654d9b1269c984c4e366c0
Reviewed-on: https://go-review.googlesource.com/18676
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
While the default behavior of eliding runtime frames from tracebacks
usually makes sense, this is not the case when you're trying to test
the runtime itself. Fix this by forcing the traceback level to at
least "system" in the runtime tests.
This will specifically help with debugging issue #13645, which has
proven remarkably resistant to reproduction outside of the build
dashboard itself.
Change-Id: I2a8356ba6c3c5badba8bb3330fc527357ec0d296
Reviewed-on: https://go-review.googlesource.com/18648
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Passes with go test -race -count=1000 -name=TestServerValidatesHostHeader now
without hanging.
Fixes#13950
Change-Id: I41c3a555c642595c95c8c52f19a05a4c68e67630
Reviewed-on: https://go-review.googlesource.com/18660
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This doesn't fix a bug, but may improve performance in programs that
have many concurrent calls from C to Go. The old code made several
system calls between lockextra and unlockextra. That could be happening
while another thread is spinning acquiring lockextra. This changes the
code to not make any system calls while holding the lock.
Change-Id: I50576478e478670c3d6429ad4e1b7d80f98a19d8
Reviewed-on: https://go-review.googlesource.com/18548
Reviewed-by: Russ Cox <rsc@golang.org>
TestFutexsleep is supposed to clean up before returning by waking up
the goroutines it started and left blocked in futex sleeps. However,
it currently fails at this in several ways:
1. Both the sleep and wakeup are done on the address of tt.mtx, but in
both cases tt is a *local copy* of the futexsleepTest created by a
loop, so the sleep and wakeup happen on completely different
addresses. Fix this by making them both use the address of the
global tt.mtx.
2. If the sleep happens after the wakeup (not likely, but not
impossible), it won't wake up. Fix this by using the futex protocol
properly: sleep if the mutex's value is 0, and set the mutex's
value to non-zero before doing the wakeup.
3. If TestFutexsleep runs more than once, channels and mutex values
left over from the first run will interfere with later runs. Fix
this by clearing the mutex value and creating a new channel for
each test and waiting for goroutines to finish before returning
(lest they send their completion to the channel for the next run).
As an added bonus, this test now actually tests that futex
sleep/wakeup work. Previously this test would have been satisfied if
futexsleep was an infinite loop and futexwakeup was a no-op.
Change-Id: I1cbc6871cc9dcb8f4601b3621913bec2b79b0fc3
Reviewed-on: https://go-review.googlesource.com/18617
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Otherwise it is impossible to vendor a/b/c without hiding the real a/b.
I also updated golang.org/s/go15vendor.
Fixes#13832.
Change-Id: Iee3d53c11ea870721803f6e8e67845b405686e79
Reviewed-on: https://go-review.googlesource.com/18644
Reviewed-by: Andrew Gerrand <adg@golang.org>
Currently readType simultaneously constructs a type graph and resolves
the sizes of the types. However, these two operations are
fundamentally at odds: the order we parse a cyclic structure in may be
different than the order we need to resolve type sizes in. As a
result, it's possible that when readType attempts to resolve the size
of a typedef, it may dereference a nil Type field of another typedef
retrieved from the type cache that's only partially constructed.
To fix this, we delay resolving typedef sizes until the end of the
readType recursion, when the full type graph is constructed.
Fixes#13039.
Change-Id: I9889af37fb3be5437995030fdd61e45871319d07
Reviewed-on: https://go-review.googlesource.com/18459
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes build on those systems.
Also fix printing of AVARLIVE.
Change-Id: I1b38cca0125689bc08e4e1bdd0d0c140b1ea079a
Reviewed-on: https://go-review.googlesource.com/18641
Reviewed-by: Russ Cox <rsc@golang.org>
This will allow the compiler to crunch Prog lists down to code as each
function is compiled, instead of waiting until the end, which should
reduce the working set of the compiler. But not until Go 1.7.
This also makes it easier to write some machine code output tests
for the assembler, which is why it's being done now.
For #13822.
Change-Id: I0811123bc6e5717cebb8948f9cea18e1b9baf6f7
Reviewed-on: https://go-review.googlesource.com/18311
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Consider this code:
func f(*int)
func g() {
p := new(int)
f(p)
}
where f is an assembly function.
In general liveness analysis assumes that during the call to f, p is dead
in this frame. If f has retained p, p will be found alive in f's frame and keep
the new(int) from being garbage collected. This is all correct and works.
We use the Go func declaration for f to give the assembly function
liveness information (the arguments are assumed live for the entire call).
Now consider this code:
func h1() {
p := new(int)
syscall.Syscall(1, 2, 3, uintptr(unsafe.Pointer(p)))
}
Here syscall.Syscall is taking the place of f, but because its arguments
are uintptr, the liveness analysis and the garbage collector ignore them.
Since p is no longer live in h once the call starts, if the garbage collector
scans the stack while the system call is blocked, it will find no reference
to the new(int) and reclaim it. If the kernel is going to write to *p once
the call finishes, reclaiming the memory is a mistake.
We can't change the arguments or the liveness information for
syscall.Syscall itself, both for compatibility and because sometimes the
arguments really are integers, and the garbage collector will get quite upset
if it finds an integer where it expects a pointer. The problem is that
these arguments are fundamentally untyped.
The solution we have taken in the syscall package's wrappers in past
releases is to insert a call to a dummy function named "use", to make
it look like the argument is live during the call to syscall.Syscall:
func h2() {
p := new(int)
syscall.Syscall(1, 2, 3, uintptr(unsafe.Pointer(p)))
use(unsafe.Pointer(p))
}
Keeping p alive during the call means that if the garbage collector
scans the stack during the system call now, it will find the reference to p.
Unfortunately, this approach is not available to users outside syscall,
because 'use' is unexported, and people also have to realize they need
to use it and do so. There is much existing code using syscall.Syscall
without a 'use'-like function. That code will fail very occasionally in
mysterious ways (see #13372).
This CL fixes all that existing code by making the compiler do the right
thing automatically, without any code modifications. That is, it takes h1
above, which is incorrect code today, and makes it correct code.
Specifically, if the compiler sees a foreign func definition (one
without a body) that has uintptr arguments, it marks those arguments
as "unsafe uintptrs". If it later sees the function being called
with uintptr(unsafe.Pointer(x)) as an argument, it arranges to mark x
as having escaped, and it makes sure to hold x in a live temporary
variable until the call returns, so that the garbage collector cannot
reclaim whatever heap memory x points to.
For now I am leaving the explicit calls to use in package syscall,
but they can be removed early in a future cycle (likely Go 1.7).
The rule has no effect on escape analysis, only on liveness analysis.
Fixes#13372.
Change-Id: I2addb83f70d08db08c64d394f9d06ff0a063c500
Reviewed-on: https://go-review.googlesource.com/18584
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CMOVs were not introduced until P6. We need 386 to run on
Pentium MMX.
Fixes#13923
Change-Id: Iee9572cd83e64c3a1336bc1e6b300b048fbcc996
Reviewed-on: https://go-review.googlesource.com/18621
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
This is the equivalent of https://golang.org/cl/18549 for
the binary importer (which is usually not used because by
default the gc compiler produces the traditional textual
export format).
For #13898.
Change-Id: Idb6b515f2ee49e6d0362c71846994b0bd4dae8f7
Reviewed-on: https://go-review.googlesource.com/18598
Reviewed-by: Alan Donovan <adonovan@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
GCC 4.8 exits 1 on an unrecognized option, but GCC 4.4 and 4.5 exit 0.
I didn't check other versions, or try to figure out just when this
changed.
Fixes#13937.
Change-Id: If193e9053fbb535999c9bde99f430f465a8c7c57
Reviewed-on: https://go-review.googlesource.com/18597
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
