The code in #20162 contains an embedded interface.
It didn't get dowidth'd by the frontend,
and during DWARF generation, ngotype asked
for a string description of it,
which triggered a request for the number of fields
in the interface, which triggered a dowidth,
which is disallowed in the backend.
The other changes in this CL are to support the test.
Fixes#20162
Change-Id: I4d0be5bd949c361d4cdc89a8ed28b10977e40cf9
Reviewed-on: https://go-review.googlesource.com/42131
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
dowidth is fundamentally unsafe to call from the back end;
it will cause data races.
Replace all calls to dowidth in the backend with
assertions that the width has been calculated.
Then fix all the cases in which that was not so,
including the cases from #20145.
Fixes#20145.
Change-Id: Idba3d19d75638851a30ec2ebcdb703c19da3e92b
Reviewed-on: https://go-review.googlesource.com/41970
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
At VARKILLs, zero a variable if it is ambiguously live.
After the VARKILL anything this variable references
might be collected. If it were to become live again later,
the GC will see references to already-collected objects.
We don't know a variable is ambiguously live until very
late in compilation (after lowering, register allocation, ...),
so it is hard to generate the code in an arch-independent way.
We also have to be careful not to clobber any registers.
Fortunately, this almost never happens so performance is ~irrelevant.
There are only 2 instances where this triggers in the stdlib.
Fixes#20029
Change-Id: Ia9585a91d7b823fad4a9d141d954464cc7af31f4
Reviewed-on: https://go-review.googlesource.com/41076
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Instead of a separate check control flow pass (checkcfg.go)
operating on nodes, perform this check at parse time on the
new syntax tree. Permits this check to be done concurrently,
and doesn't depend on the specifics of the symbol's dclstack
implementation anymore. The remaining dclstack uses will be
removed in a follow-up change.
- added CheckBranches Mode flag (so we can turn off the check
if we only care about syntactic correctness, e.g. for tests)
- adjusted test/goto.go error messages: the new branches
checker only reports if a goto jumps into a block, but not
which block (we may want to improve this again, eventually)
- also, the new branches checker reports one variable that
is being jumped over by a goto, but it may not be the first
one declared (this is fine either way)
- the new branches checker reports additional errors for
fixedbugs/issue14006.go (not crucial to avoid those errors)
- the new branches checker now correctly reports only
variable declarations being jumped over, rather than
all declarations (issue 8042). Added respective tests.
Fixes#8042.
Change-Id: I53b6e1bda189748e1e1fb5b765a8a64337c27d40
Reviewed-on: https://go-review.googlesource.com/39998
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The fixedbugs/issue12536.go file was erroneously deleted just before
committing the patch that fixed the issue (CL 14400).
That's an easy test and there's a small reproducer in the issue, add
it back.
Updates #12536
Change-Id: Ib7b0cd245588299e9a5469e1d75805fd0261ce1a
Reviewed-on: https://go-review.googlesource.com/40712
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also adjust truncfltlit to make it more similar to trunccmplxlit, and
make it report an error for bad Etypes.
Fixes#19947
Change-Id: I6684523e989c2293b8a8e85bd2bfb9c399c5ea36
Reviewed-on: https://go-review.googlesource.com/40453
Reviewed-by: Robert Griesemer <gri@golang.org>
When casting an ideal to complex{64,128}, for example during the
evaluation of
var a = complex64(0) / 1e-50
we want the compiler to report a division-by-zero error if a divisor
would be zero after the cast.
We already do this for floats; for example
var b = float32(0) / 1e-50
generates a 'division by zero' error at compile time (because
float32(1e-50) is zero, and the cast is done before performing the
division).
There's no such check in the path for complex{64,128} expressions, and
no cast is performed before the division in the evaluation of
var a = complex64(0) / 1e-50
which compiles just fine.
This patch changes the convlit1 function so that complex ideals
components (real and imag) are correctly truncated to float{32,64}
when doing an ideal -> complex{64, 128} cast.
Fixes#11674
Change-Id: Ic5f8ee3c8cfe4c3bb0621481792c96511723d151
Reviewed-on: https://go-review.googlesource.com/37891
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This avoids false positives
like those found in #19880.
Fixes#19880
Change-Id: I583c16cc3c71e7462a72500db9ea2547c468f8c1
Reviewed-on: https://go-review.googlesource.com/40255
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Given code such as
type T struct {
_ string
}
func f() {
var x = T{"space"}
// ...
}
the compiler rewrote the 'var x' line as
var x T
x._ = "space"
The compiler then rejected the assignment to
a blank field, thus rejecting valid code.
It also failed to catch a number of invalid assignments.
And there were insufficient checks for validity
when emitting static data, leading to ICEs.
To fix, check earlier for explicit blanks field names,
explicitly handle legit blanks in sinit,
and don't try to emit static data for nodes
for which typechecking has failed.
Fixes#19482
Change-Id: I594476171d15e6e8ecc6a1749e3859157fe2c929
Reviewed-on: https://go-review.googlesource.com/38006
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Dupok symbols may be defined in multiple packages. Its associated
package is chosen sort of arbitrarily (the first containing package
that the linker loads). Canonicalize its package to the package
with which it will be laid down in text, which is the first package
in dependency order that defines the symbol. So later passes (for
example, trampoline insertion pass) know that the dupok symbol
is laid down along with the package.
Fixes#19764.
Change-Id: I7cbc7474ff3016d5069c8b7be04af934abab8bc3
Reviewed-on: https://go-review.googlesource.com/39150
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
Now that we no longer generate dead code,
it is possible to follow block predecessors
into infinite loops with no variable definitions,
causing an infinite loop during phi insertion.
To fix that, check explicitly whether the predecessor
is dead in lookupVarOutgoing, and if so, bail.
The loop in lookupVarOutgoing is very hot code,
so I am wary of adding anything to it.
However, a long, CPU-only benchmarking run shows no
performance impact at all.
Fixes#19783
Change-Id: I8ef8d267e0b20a29b5cb0fecd7084f76c6f98e47
Reviewed-on: https://go-review.googlesource.com/38913
Reviewed-by: David Chase <drchase@google.com>
The uintptr-typed Data field in reflect.SliceHeader and
reflect.StringHeader needs special treatment because it is
really a pointer. Add the special treatment in walk for
bug #19168 to escape analysis.
Includes extra debugging that was helpful.
Fixes#19743.
Change-Id: I6dab5002f0d436c3b2a7cdc0156e4fc48a43d6fe
Reviewed-on: https://go-review.googlesource.com/38738
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Previously, an inlined call to wg.Done() in package main would have the
following incorrect symbol name:
main.(*sync.WaitGroup).Done
This change modifies methodname to return the correct symbol name:
sync.(*WaitGroup).Done
This fix was suggested by @mdempsky.
Fixes#19467.
Change-Id: I0117838679ac5353789299c618ff8c326712d94d
Reviewed-on: https://go-review.googlesource.com/37866
Reviewed-by: Austin Clements <austin@google.com>
Gccgo crashed compiling a function that returned multiple zero-sized values.
Change-Id: I499112cc310e4a4f649962f4d2bc9fee95dee1b6
Reviewed-on: https://go-review.googlesource.com/38772
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This was cherry-picked to 1.8 as CL 38587, but on master issue was fixed
by CL 37661. Add still relevant part (test) and close issue, since test passes.
Fixes#19201
Change-Id: I6415792e2c465dc6d9bd6583ba1e54b107bcf5cc
Reviewed-on: https://go-review.googlesource.com/37376
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Prior to this CL, Type.Width != 0 was the mark
of a Type whose Width had been calculated.
As a result, dowidth always recalculated
the width of struct{}.
This, combined with the prohibition on calculating
the width of a FuncArgsStruct and the use of
struct{} as a function argument,
meant that there were circumstances in which
it was forbidden to call dowidth on a type.
This inhibits refactoring to call dowidth automatically,
rather than explicitly.
Instead add a helper method, Type.WidthCalculated,
and implement as Type.Align > 0.
Type.Width is not a good candidate for tracking
whether the width has been calculated;
0 is a value type width, and Width is subject to
too much magic value game-playing.
For good measure, add a test for #11354.
Change-Id: Ie9a9fb5d924e7a2010c1904ae5e38ed4a38eaeb2
Reviewed-on: https://go-review.googlesource.com/38468
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Avoid construction of incorrect syntax trees in presence of errors.
For #19663.
Change-Id: I43025a3cf0fe02cae9a57e8bb9489b5f628c3fd7
Reviewed-on: https://go-review.googlesource.com/38604
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Simple phi insertion already had a heuristic to check
for dead blocks, namely having no predecessors.
When we stopped generating code for dead blocks,
we eliminated some values contained in more subtle
dead blocks, which confused phi insertion.
Compensate by beefing up the reachability check.
Fixes#19678
Change-Id: I0081e4a46f7ce2f69b131a34a0553874a0cb373e
Reviewed-on: https://go-review.googlesource.com/38602
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 37499 allows inlining more functions by ignoring dead code.
However, that dead code can contain non-exportable constructs.
Teach the exporter not to export dead code.
Fixes#19679
Change-Id: Idb1d3794053514544b6f1035d29262aa6683e1e7
Reviewed-on: https://go-review.googlesource.com/38601
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Almost never happens in practice.
The compiler will generate reasonable code anyway,
since assignments involving [0]T never do any work.
Fixes#19696Fixes#19671
Change-Id: I350d2e0c5bb326c4789c74a046ab0486b2cee49c
Reviewed-on: https://go-review.googlesource.com/38599
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously, we handled recursive interfaces by deferring typechecking
of interface methods, while eagerly expanding interface embeddings.
This CL switches to eagerly evaluating interface methods, and
deferring expanding interface embeddings to dowidth. This allows us to
detect recursive interface embeddings with the same mechanism used for
detecting recursive struct embeddings.
Updates #16369.
Change-Id: If4c0320058047f8a2d9b52b9a79de47eb9887f95
Reviewed-on: https://go-review.googlesource.com/38391
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Report syntax error that was missed when moving to new parser.
Fixes#19610.
Change-Id: Ie5625f907a84089dc56fcccfd4f24df546042783
Reviewed-on: https://go-review.googlesource.com/38375
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
See https://go-review.googlesource.com/#/c/38313/ for background.
It turns out that only a few tests checked for this.
The new error message is shorter and very clear.
Change-Id: I8ab4ad59fb023c8b54806339adc23aefd7dc7b07
Reviewed-on: https://go-review.googlesource.com/38314
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Interface wrapper functions now get compiled eagerly in some cases.
Consequently, they may be present in multiple translation units.
Mark them as DUPOK, just like closures.
Fixes#19548Fixes#19550
Change-Id: Ibe74adb5a62dbf6447db37fde22dcbb3479969ef
Reviewed-on: https://go-review.googlesource.com/38156
Reviewed-by: David Chase <drchase@google.com>
Move the zeroing of results earlier. In particular, they need to
come before any move-to-heap operations, as those require allocation.
Those allocations are points at which the GC can see the uninitialized
result slots.
For the function:
func f() (x, y, z *int) {
defer(){}()
escape(&y)
return
}
We used to generate code like this:
x = nil
y = nil
&y = new(int)
z = nil
Now we will generate:
x = nil
y = nil
z = nil
&y = new(int)
Since the fix for #18860, the return slots are always live if there
is a defer, so the former ordering allowed the GC to see junk
in the z slot.
Fixes#19078
Change-Id: I71554ae437549725bb79e13b2c100b2911d47ed4
Reviewed-on: https://go-review.googlesource.com/38133
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
After benchmarking with a compiler modified to have better
spill location, it became clear that this method of checking
was actually faster on (at least) two different architectures
(ppc64 and amd64) and it also provides more timely interruption
of loops.
This change adds a modified FOR loop node "FORUNTIL" that
checks after executing the loop body instead of before (i.e.,
always at least once). This ensures that a pointer past the
end of a slice or array is not made visible to the garbage
collector.
Without the rescheduling checks inserted, the restructured
loop from this change apparently provides a 1% geomean
improvement on PPC64 running the go1 benchmarks; the
improvement on AMD64 is only 0.12%.
Inserting the rescheduling check exposed some peculiar bug
with the ssa test code for s390x; this was updated based on
initial code actually generated for GOARCH=s390x to use
appropriate OpArg, OpAddr, and OpVarDef.
NaCl is disabled in testing.
Change-Id: Ieafaa9a61d2a583ad00968110ef3e7a441abca50
Reviewed-on: https://go-review.googlesource.com/36206
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When defining an int const, the compiler tries to cast the RHS
expression to int. The cast may fail for three reasons:
1. expr is an integer constant that overflows int
2. expr is a floating point constant
3. expr is a complex constant, or not a number
In the second case, in order to print a sensible error message, we
must distinguish between a floating point constant that should be
included in the error message and a floating point constant that
cannot be reasonably formatted for inclusion in an error message.
For example, in:
const a int = 1.1
const b int = 1 + 1e-100
a is in the former group, while b is in the latter, since the floating
point value resulting from the evaluation of the rhs of the assignment
(1.00...01) is too long to be fully printed in an error message, and
cannot be shortened without making the error message misleading
(rounding or truncating it would result in a "1", which looks like an
integer constant, and it makes little sense in an error message about
an invalid floating point expression).
To fix this problem, we try to format the float value using fconv
(which is used by the error reporting mechanism to format float
arguments), and then parse the resulting string back to a
big.Float. If the result is an integer, we assume that expr is a float
value that cannot be reasonably be formatted as a string, and we emit
an error message that does not include its string representation.
Also, change the error message for overflows to a more conservative
"integer too large", which does not mention overflows that are only
caused by an internal implementation restriction.
Also, change (*Mpint) SetFloat so that it returns a bool (instead of
0/-1 for success/failure).
Fixes#11371
Change-Id: Ibbc73e2ed2eaf41f07827b0649d0eb637150ecaa
Reviewed-on: https://go-review.googlesource.com/35411
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This reverts commit cb6e0639fb.
The fix is incorrect as it's perfectly fine to refer to an
identifier 'init' inside a function, and 'init' may even be
a variable of function value. Misspelling 'init' in that
context would lead to an incorrect error message.
Reopened#8481.
Change-Id: I49787fdf7738213370ae6f0cab54013e9e3394a8
Reviewed-on: https://go-review.googlesource.com/37876
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
New special case for booleans and byte-sized integer types
converted to interfaces needs to ensure that the operand is
not too complex, if it were to appear in a parameter list
for example.
Added test, also increased the recursive node dump depth to
a level that was actually useful for an actual bug.
Fixes#19275.
Change-Id: If36ac3115edf439e886703f32d149ee0a46eb2a5
Reviewed-on: https://go-review.googlesource.com/37470
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
CL 35562 substituted zerobase for the pointer for
interfaces containing zero-sized values.
However, it failed to evaluate the zero-sized value
expression for side-effects. Fix that.
The other similar interface value optimizations
are not affected, because they all actually use the
value one way or another.
Fixes#19246
Change-Id: I1168a99561477c63c29751d5cd04cf81b5ea509d
Reviewed-on: https://go-review.googlesource.com/37395
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The loop-A-encloses-loop-C code did not properly handle the
case where really C was already known to be enclosed by B,
and A was nearest-outer to B, not C.
Fixes#19217.
Change-Id: I755dd768e823cb707abdc5302fed39c11cdb34d4
Reviewed-on: https://go-review.googlesource.com/37340
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Avoid printing a second error message when a field of an undefined
variable is accessed.
Fixes#8440.
Change-Id: I3fe0b11fa3423cec3871cb01b5951efa8ea7451a
Reviewed-on: https://go-review.googlesource.com/36751
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#19012.
Fallback to return signatures without detailed types.
These error message will be of the form of issue:
* https://golang.org/issues/4215
* https://golang.org/issues/6750
So:
func f(x int, y uint) {
return x > y
}
f(10, "a" < 3)
will give errors:
too many errors to return
too many arguments in call to f
instead of:
too many errors to return
have (<T>)
want ()
too many arguments in call to f
have (number, <T>)
want (number, number)
Change-Id: I680abc7cdd8444400e234caddf3ff49c2d69f53d
Reviewed-on: https://go-review.googlesource.com/36806
Reviewed-by: Robert Griesemer <gri@golang.org>
Added a flag to generic and various architectures' atomic
operations that are judged to have observable side effects
and thus cannot be dead-code-eliminated.
Test requires GOMAXPROCS > 1 without preemption in loop.
Fixes#19182.
Change-Id: Id2230031abd2cca0bbb32fd68fc8a58fb912070f
Reviewed-on: https://go-review.googlesource.com/37333
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The rules for folding addresses into load/stores checks sym1 is
not on stack (because the stack offset is not known at that point).
But sym1 could be nil, which invalidates the check. Check merged
sym instead.
Fixes#19137.
Change-Id: I8574da22ced1216bb5850403d8f08ec60a8d1005
Reviewed-on: https://go-review.googlesource.com/37145
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
CL 35261 introduces special handling of zero-valued STRUCTLIT for
efficient struct zeroing. But it didn't cover all use cases, for
example, CONVNOP STRUCTLIT is not handled.
On the other hand, CL 34566 handles zeroing earlier, so we don't
need the change in CL 35261 for efficient zeroing. Other uses of
zero-valued struct literals are very rare. So undo the change in
walk.go in CL 35261.
Add a test for efficient zeroing.
Fixes#19084.
Change-Id: I0807f7423fb44d47bf325b3c1ce9611a14953853
Reviewed-on: https://go-review.googlesource.com/36955
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Use distinction between explicit and automatically inserted semicolons
to provide a better error message if the condition in an 'if' statement
is missing.
For #18747.
Change-Id: Iac167ae4e5ad53d2dc73f746b4dee9912434bb59
Reviewed-on: https://go-review.googlesource.com/36930
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Added missing nil-check. We will get rid of the gcCompat corrections
shortly but it's still worthwhile having the new test case added.
Fixes#19056.
Change-Id: I35bd938a4d789058da15724e34c05e5e631ecad0
Reviewed-on: https://go-review.googlesource.com/36908
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The gcCompat mode was introduced to match the new parser's node position
setup exactly with the positions used by the original parser. Some of the
gcCompat adjustments were required to satisfy syntax error test cases,
and the rest were required to make toolstash cmp pass.
This change removes the former gcCompat adjustments and instead adjusts
the respective test cases as necessary. In some cases this makes the error
lines consistent with the ones reported by gccgo.
Where it has changed, the position associated with a given syntactic construct
is the position (line/col number) of the left-most token belonging to the
construct.
Change-Id: I5b60c00c5999a895c4d6d6e9b383c6405ccf725c
Reviewed-on: https://go-review.googlesource.com/36695
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Starting the error message with "expecting" rather than "missing"
causes the syntax error mechanism to add additional helpful info
(it recognizes "expecting" but not "missing").
Fixes#17328.
Change-Id: I8482ca5e5a6a6b22e0ed0d831b7328e264156334
Reviewed-on: https://go-review.googlesource.com/36637
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Towards better syntax error messages: With this change, the parser knows whether
a semicolon was an actual ';' in the source, or whether it was an automatically
inserted semicolon as result of a '\n' or EOF. Using this information in error
messages makes them more understandable.
For #17328.
Change-Id: I8cd9accee8681b62569d0ecef922d38682b401eb
Reviewed-on: https://go-review.googlesource.com/36636
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For code such as
if a := 10 { ...
the 1.7 compiler reported
a := 10 used as value
while the 1.8 compiler reported
invalid condition, tag, or type switch guard
Changed the error message to match the 1.7 compiler.
Fixes#18915.
Change-Id: I01308862e461922e717f9f8295a9db53d5a914eb
Reviewed-on: https://go-review.googlesource.com/36470
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We shouldn't use CONVNOP for conversions between two different
nonempty interface types, because we want to update the itab
in those situations.
Fixes#18595
After this CL, we are guaranteed that itabs are unique, that is
there is only one itab per compile-time-type/concrete type pair.
See also the tests in CL 35115 and 35116 which make sure this
invariant holds even for shared libraries and plugins.
Unique itabs are required for CL 34810 (faster type switch code).
R=go1.9
Change-Id: Id27d2e01ded706680965e4cb69d7c7a24ac2161b
Reviewed-on: https://go-review.googlesource.com/35119
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This CL fixes two issues:
1. Load ops were initially always lowered to unsigned loads, even
for signed types. This was fine by itself however LoadReg ops
(used to re-load spilled values) were lowered to signed loads
for signed types. This meant that spills could invalidate
optimizations that assumed the original unsigned load.
2. Types were not always being maintained correctly through rules
designed to eliminate unnecessary zero and sign extensions.
Fixes#18906.
Change-Id: I95785dcadba03f7e3e94524677e7d8d3d3b9b737
Reviewed-on: https://go-review.googlesource.com/36256
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Fixes#8481.
Inform the user that init functions cannot be directly invoked
in user code, as mandated by the spec at:
http://golang.org/ref/spec#Program_initialization_and_execution.
Change-Id: Ib12c0c08718ffd48b76b6f9b13c76bb6612d2e7b
Reviewed-on: https://go-review.googlesource.com/34790
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#15055.
Updates exprfmt printing using fmt verb "%v" to check that n.Left
is non-nil before attempting to print it, otherwise we'll print
the nodes in the list using verb "%.v".
Credit to @mdempsky for this approach and for finding
the root cause of the issue.
Change-Id: I20a6464e916dc70d5565e145164bb9553e5d3865
Reviewed-on: https://go-review.googlesource.com/25361
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make sure that the lack of an lvalue doesn't
cause extra side-effects.
Updates #18661
Updates #18739
Change-Id: I52eb4b4a5c6f8ff5cddd2115455f853c18112c19
Reviewed-on: https://go-review.googlesource.com/36126
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When switching to the new parser, I changed cmd/compile to handle iota
per an intuitive interpretation of how nested constant declarations
should work (which also matches go/types).
Note: if we end up deciding that the current spec wording is
intentional (i.e., confirming gccgo's current behavior), the test will
need to be updated to expect 4 instead of 1.
Updates #15550.
Change-Id: I441f5f13209f172b73ef75031f2a9daa5e985277
Reviewed-on: https://go-review.googlesource.com/36122
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Whoever called toint() is expecting the {Mpint, Mpflt, Mpcplx} arg to
be converted to an integer expression, so it never makes sense to
report an error as "constant X truncated to real".
Fixes#11580
Change-Id: Iadcb105f0802358a7f77188c2b1e63fe80c5580c
Reviewed-on: https://go-review.googlesource.com/34638
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
For #18130.
f8b4123613 [dev.typealias] spec: use term 'embedded field' rather than 'anonymous field'
9ecc3ee252 [dev.typealias] cmd/compile: avoid false positive cycles from type aliases
49b7af8a30 [dev.typealias] reflect: add test for type aliases
9bbb07ddec [dev.typealias] cmd/compile, reflect: fix struct field names for embedded byte, rune
43c7094386 [dev.typealias] reflect: fix StructOf use of StructField to match StructField docs
9657e0b077 [dev.typealias] cmd/doc: update for type alias
de2e5459ae [dev.typealias] cmd/compile: declare methods after resolving receiver type
9259f3073a [dev.typealias] test: match gccgo error messages on alias2.go
5d92916770 [dev.typealias] cmd/compile: change Func.Shortname to *Sym
a7c884efc1 [dev.typealias] go/internal/gccgoimporter: support for type aliases
5802cfd900 [dev.typealias] cmd/compile: export/import test cases for type aliases
d7cabd40dd [dev.typealias] go/types: clarified doc string
cc2dcce3d7 [dev.typealias] cmd/compile: a few better comments related to alias types
5c160b28ba [dev.typealias] cmd/compile: improved error message for cyles involving type aliases
b2386dffa1 [dev.typealias] cmd/compile: type-check type alias declarations
ac8421f9a5 [dev.typealias] cmd/compile: various minor cleanups
f011e0c6c3 [dev.typealias] cmd/compile, go/types, go/importer: various alias related fixes
49de5f0351 [dev.typealias] cmd/compile, go/importer: define export format and implement importing of type aliases
5ceec42dc0 [dev.typealias] go/types: export TypeName.IsAlias so clients can use it
aa1f0681bc [dev.typealias] go/types: improved Object printing
c80748e389 [dev.typealias] go/types: remove some more vestiges of prior alias implementation
80d8b69e95 [dev.typealias] go/types: implement type aliases
a917097b5e [dev.typealias] go/build: add go1.9 build tag
3e11940437 [dev.typealias] cmd/compile: recognize type aliases but complain for now (not yet supported)
e0a05c274a [dev.typealias] cmd/gofmt: added test cases for alias type declarations
2e5116bd99 [dev.typealias] go/ast, go/parser, go/printer, go/types: initial type alias support
Change-Id: Ia65f2e011fd7195f18e1dce67d4d49b80a261203
When nilcheck runs, the values in a block are not in any particular
order. So any facts derived from examining the blocks shouldn't be
used until we reach the next block.
This is suboptimal as it won't eliminate nil checks within a block.
But it's probably a better fix for now as it is a much smaller change
than other strategies for fixing this bug.
nilptr3.go changes are mostly because for this pattern:
_ = *p
_ = *p
either nil check is fine to keep, and this CL changes which one
the compiler tends to keep.
There are a few regressions from code like this:
_ = *p
f()
_ = *p
For this pattern, after this CL we issue 2 nil checks instead of one.
(For the curious, this happens because intra-block nil check
elimination now falls to CSE, not nilcheck proper. The former
pattern has two nil checks with the same store argument. The latter
pattern has two nil checks with different store arguments.)
Fixes#18725
Change-Id: I3721b494c8bc9ba1142dc5c4361ea55c66920ac8
Reviewed-on: https://go-review.googlesource.com/35485
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The test is inherently racy and vulnerable to starvation,
and within all.bash on some platforms that means it flakes.
Test is kept because it can be useful standalone to verify
behavior of GOEXPERIMENT=preeemptibleloops, and there is
likely to be further development of this feature in the
future.
There's also some question as to why it is flaking, because
though technically this is permitted, it's very odd in this
simple case.
Fixes#18589.
Change-Id: Ia0dd9037285c4a03122da4012c96981c9cc43b60
Reviewed-on: https://go-review.googlesource.com/35051
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Loop breaking with a counter. Benchmarked (see comments),
eyeball checked for sanity on popular loops. This code
ought to handle loops in general, and properly inserts phi
functions in cases where the earlier version might not have.
Includes test, plus modifications to test/run.go to deal with
timeout and killing looping test. Tests broken by the addition
of extra code (branch frequency and live vars) for added
checks turn the check insertion off.
If GOEXPERIMENT=preemptibleloops, the compiler inserts reschedule
checks on every backedge of every reducible loop. Alternately,
specifying GO_GCFLAGS=-d=ssa/insert_resched_checks/on will
enable it for a single compilation, but because the core Go
libraries contain some loops that may run long, this is less
likely to have the desired effect.
This is intended as a tool to help in the study and diagnosis
of GC and other latency problems, now that goal STW GC latency
is on the order of 100 microseconds or less.
Updates #17831.
Updates #10958.
Change-Id: I6206c163a5b0248e3f21eb4fc65f73a179e1f639
Reviewed-on: https://go-review.googlesource.com/33910
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CALLPART of STRUCTLIT did not check for incomplete initialization
of struct; modify PTRLIT treatment to force zeroing.
Test for structlit, believe this might have also failed for
arraylit.
Fixes#18410.
Change-Id: I511abf8ef850e300996d40568944665714efe1fc
Reviewed-on: https://go-review.googlesource.com/34622
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Fixes#18392.
Avoid nil dereferencing n.Right when dealing with non-existent
self referenced interface methods e.g.
type A interface{
Fn(A.Fn)
}
Instead, infer the symbol name from n.Sym itself.
Change-Id: I60d5f8988e7318693e5c8da031285d8d7347b771
Reviewed-on: https://go-review.googlesource.com/34817
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Fixes#6772.
Lock-in test for invalid range loop: repeated variables in range declaration.
Change-Id: I37dd8b1cd7279abe7810deaf8a5d485c5c3b73ca
Reviewed-on: https://go-review.googlesource.com/34714
Reviewed-by: Keith Randall <khr@golang.org>
Change-Id: I00c97c36e8fdc79582eaed21877e4c8f44568666
Reviewed-on: https://go-review.googlesource.com/34316
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
- make the scanner unconditionally gc compatible
- consistently use "invalid" instead "illegal" in errors
Reviewed in and cherry-picked from https://go-review.googlesource.com/#/c/33896/.
Change-Id: I4c4253e7392f3311b0d838bbe503576c9469b203
Reviewed-on: https://go-review.googlesource.com/34237
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This was a regression from 1.7. See the issue for details.
Fixes#18149.
Change-Id: Ic8f5a35d14edf9254b1275400316cff7aff32a27
Reviewed-on: https://go-review.googlesource.com/33799
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It was supposed to be testing SSA, not amd64.
For #18024
Change-Id: Ibe65d7eb6bed9bc4b3eda68e1eaec5fa39fe8f76
Reviewed-on: https://go-review.googlesource.com/33491
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
The table of rewrites in ssa/cse is not sized appropriately for
ssa IDs that are created during copying of selects into new blocks.
Fixes#17918
Change-Id: I65fe86c6aab5efa679aa473aadc4ee6ea882cd41
Reviewed-on: https://go-review.googlesource.com/33240
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The tree is inconsistent about single l vs double l in those
words in documentation, test messages, and one error value text.
$ git grep -E '[Mm]arshall(|s|er|ers|ed|ing)' | wc -l
42
$ git grep -E '[Mm]arshal(|s|er|ers|ed|ing)' | wc -l
1694
Make it consistently a single l, per earlier decisions. This means
contributors won't be confused by misleading precedence, and it helps
consistency.
Change the spelling in one error value text in newRawAttributes of
crypto/x509 package to be consistent.
This change was generated with:
perl -i -npe 's,([Mm]arshal)l(|s|er|ers|ed|ing),$1$2,' $(git grep -l -E '[Mm]arshall' | grep -v AUTHORS | grep -v CONTRIBUTORS)
Updates #12431.
Follows https://golang.org/cl/14150.
Change-Id: I85d28a2d7692862ccb02d6a09f5d18538b6049a2
Reviewed-on: https://go-review.googlesource.com/33017
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
ppc64le supports both internal and external linking so I don't
think there is any reason for it to skip this test.
Change-Id: I05c80cc25909c0364f0a1fb7d20766b011ea1ebb
Reviewed-on: https://go-review.googlesource.com/32854
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
