I was confused about how to start an HTTP server if the server
cert/key are in memory, not on disk. I thought it would be good to
show an example of how to use these two functions to accomplish that.
example-cert.pem and example-key.pem were generated using
crypto/tls/generate_cert.go.
Change-Id: I850e1282fb1c38aff8bd9aeb51988d21fe307584
Reviewed-on: https://go-review.googlesource.com/72252
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Even though GOARCH=riscv64 is not supported by gc yet, it is easy
to make cmd/cgo already support it.
Together with the changes in debug/elf in CL 107339 this e.g. allows
to generate Go type definitions for linux/riscv64 in the
golang.org/x/sys/unix package without using gccgo.
Change-Id: I6b849df2ddac56c8c483eb03d56009669ca36973
Reviewed-on: https://go-review.googlesource.com/110066
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The iOS exec wrapper uses ios-deploy to set up a device, install
the wrapped app, and start a lldb session to run it. ios-deploy is
not built to be scripted, as can be seen from the brittle way it is
driven by the Go wrapper. There are many timeouts and comments such
as
"
// lldb tries to be clever with terminals.
// So we wrap it in script(1) and be clever
// right back at it.
"
This CL replaces the use of ios-deploy with a lldb driver script in
Python. lldb is designed to be scripted, so apart from getting rid
of the ios-deploy dependency, we gain:
- No timouts and scripting ios-deploy through stdin and parsing
stdout for responses.
- Accurate exit codes.
- Prompt exits when the wrapped binary fails for some reason. Before,
the go test timeout would kick in to fail the test.
- Support for environment variables.
- No noise in the test output. Only the test binary output is output
from the wrapper.
We have to do more work with the lldb driver: mounting the developer
image on the device, running idevicedebugserverproxy and installing
the app. Even so, the CL removes almost as many lines as it adds.
Furthermore, having the steps split up helps to tell setup errors
from runtime errors.
Change-Id: I48cccc32f475d17987283b2c93aacc3da18fe339
Reviewed-on: https://go-review.googlesource.com/107337
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Missed conversion of newosproc for the parts of darwin that
weren't affected by my previous change.
Update #25181
Change-Id: I81a2935e192b6d0df358c59b7e785eb03c504c23
Reviewed-on: https://go-review.googlesource.com/110123
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
In the binary sizes FAQ, the approximate size of a Go hello world
binary was said to be 1.5MB (it was about 1.6MB on go1.7 on
linux/amd64). Sadly, this is no longer true. A Go1.10 hello world is
2.0MB, and in 1.11 it'll be about 2.5MB.
Just say "a couple megabytes" to stop this dance.
Change-Id: Ib4dc13a47ccd51327c1a9d90d4116f79597513a4
Reviewed-on: https://go-review.googlesource.com/110069
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Some of the comments relative paths do not exist and
reflect does not define its own hmap structure.
Correct paths and consistently reference paths starting from the
go src directory.
Change-Id: I5204a3a98f77d65f17dcde98b847378cea05ad8a
Reviewed-on: https://go-review.googlesource.com/94758
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Replace thread creation with calls to the pthread
library in libc.
Update #17490
Change-Id: I1e19965c45255deb849b059231252fc6a7861d6c
Reviewed-on: https://go-review.googlesource.com/108679
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
and assign the same colors for spans belong to the tasks
(sadly, the trace viewer will change the saturation/ligthness
for asynchronous slices so exact color mapping is impossible.
But I hope they are not too far from each other)
Change-Id: Idaaf0828a1e0dac8012d336dcefa1c6572ddca2e
Reviewed-on: https://go-review.googlesource.com/109338
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Change the help doc of
go tool compile -d=ssa/help
from this:
compile: GcFlag -d=ssa/<phase>/<flag>[=<value>|<function_name>]
<phase> is one of:
check, all, build, intrinsics, early_phielim, early_copyelim
early_deadcode, short_circuit, decompose_user, opt, zero_arg_cse
opt_deadcode, generic_cse, phiopt, nilcheckelim, prove, loopbce
decompose_builtin, softfloat, late_opt, generic_deadcode, check_bce
fuse, dse, writebarrier, insert_resched_checks, tighten, lower
lowered_cse, elim_unread_autos, lowered_deadcode, checkLower
late_phielim, late_copyelim, phi_tighten, late_deadcode, critical
likelyadjust, layout, schedule, late_nilcheck, flagalloc, regalloc
loop_rotate, stackframe, trim
<flag> is one of on, off, debug, mem, time, test, stats, dump
<value> defaults to 1
<function_name> is required for "dump", specifies name of function to dump after <phase>
Except for dump, output is directed to standard out; dump appears in a file.
Phase "all" supports flags "time", "mem", and "dump".
Phases "intrinsics" supports flags "on", "off", and "debug".
Interpretation of the "debug" value depends on the phase.
Dump files are named <phase>__<function_name>_<seq>.dump.
To this:
compile: PhaseOptions usage:
go tool compile -d=ssa/<phase>/<flag>[=<value>|<function_name>]
where:
- <phase> is one of:
check, all, build, intrinsics, early_phielim, early_copyelim
early_deadcode, short_circuit, decompose_user, opt, zero_arg_cse
opt_deadcode, generic_cse, phiopt, nilcheckelim, prove
decompose_builtin, softfloat, late_opt, generic_deadcode, check_bce
branchelim, fuse, dse, writebarrier, insert_resched_checks, lower
lowered_cse, elim_unread_autos, lowered_deadcode, checkLower
late_phielim, late_copyelim, tighten, phi_tighten, late_deadcode
critical, likelyadjust, layout, schedule, late_nilcheck, flagalloc
regalloc, loop_rotate, stackframe, trim
- <flag> is one of:
on, off, debug, mem, time, test, stats, dump
- <value> defaults to 1
- <function_name> is required for the "dump" flag, and specifies the
name of function to dump after <phase>
Phase "all" supports flags "time", "mem", and "dump".
Phase "intrinsics" supports flags "on", "off", and "debug".
If the "dump" flag is specified, the output is written on a file named
<phase>__<function_name>_<seq>.dump; otherwise it is directed to stdout.
Also add a few examples at the bottom.
Fixes#20349
Change-Id: I334799e951e7b27855b3ace5d2d966c4d6ec4cff
Reviewed-on: https://go-review.googlesource.com/110062
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The prove pass sometimes has bounds information
that later rewrite passes do not.
Use this information to mark shifts as bounded,
and then use that information to generate better code on amd64.
It may prove to be helpful on other architectures, too.
While here, coalesce the existing shift lowering rules.
This triggers 35 times building std+cmd. The full list is below.
Here's an example from runtime.heapBitsSetType:
if nb < 8 {
b |= uintptr(*p) << nb
p = add1(p)
} else {
nb -= 8
}
We now generate better code on amd64 for that left shift.
Updates #25087
vendor/golang_org/x/crypto/curve25519/mont25519_amd64.go:48:20: Proved Rsh8Ux64 bounded
runtime/mbitmap.go:1252:22: Proved Lsh64x64 bounded
runtime/mbitmap.go:1265:16: Proved Lsh64x64 bounded
runtime/mbitmap.go:1275:28: Proved Lsh64x64 bounded
runtime/mbitmap.go:1645:25: Proved Lsh64x64 bounded
runtime/mbitmap.go:1663:25: Proved Lsh64x64 bounded
runtime/mbitmap.go:1808:41: Proved Lsh64x64 bounded
runtime/mbitmap.go:1831:49: Proved Lsh64x64 bounded
syscall/route_bsd.go:227:23: Proved Lsh32x64 bounded
syscall/route_bsd.go:295:23: Proved Lsh32x64 bounded
syscall/route_darwin.go:40:23: Proved Lsh32x64 bounded
compress/bzip2/bzip2.go:384:26: Proved Lsh64x16 bounded
vendor/golang_org/x/net/route/address.go:370:14: Proved Lsh64x64 bounded
compress/flate/inflate.go:201:54: Proved Lsh64x64 bounded
math/big/prime.go:50:25: Proved Lsh64x64 bounded
vendor/golang_org/x/crypto/cryptobyte/asn1.go:464:43: Proved Lsh8x8 bounded
net/ip.go:87:21: Proved Rsh8Ux64 bounded
cmd/internal/goobj/read.go:267:23: Proved Lsh64x64 bounded
cmd/vendor/golang.org/x/arch/arm64/arm64asm/decode.go:534:27: Proved Lsh32x32 bounded
cmd/vendor/golang.org/x/arch/arm64/arm64asm/decode.go:544:27: Proved Lsh32x32 bounded
cmd/internal/obj/arm/asm5.go:1044:16: Proved Lsh32x64 bounded
cmd/internal/obj/arm/asm5.go:1065:10: Proved Lsh32x32 bounded
cmd/internal/obj/mips/obj0.go:1311:21: Proved Lsh32x64 bounded
cmd/compile/internal/syntax/scanner.go:352:23: Proved Lsh64x64 bounded
go/types/expr.go:222:36: Proved Lsh64x64 bounded
crypto/x509/x509.go:1626:9: Proved Rsh8Ux64 bounded
cmd/link/internal/loadelf/ldelf.go:823:22: Proved Lsh8x64 bounded
net/http/h2_bundle.go:1470:17: Proved Lsh8x8 bounded
net/http/h2_bundle.go:1477:46: Proved Lsh8x8 bounded
net/http/h2_bundle.go:1481:31: Proved Lsh64x8 bounded
cmd/compile/internal/ssa/rewriteARM64.go:18759:17: Proved Lsh64x64 bounded
cmd/compile/internal/ssa/sparsemap.go:70:23: Proved Lsh32x64 bounded
cmd/compile/internal/ssa/sparsemap.go:73:45: Proved Lsh32x64 bounded
Change-Id: I58bb72f3e6f12f6ac69be633ea7222c245438142
Reviewed-on: https://go-review.googlesource.com/109776
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
When a loop has bound len(s)-delta, findIndVar detected it and
returned len(s) as (conservative) upper bound. This little lie
allowed loopbce to drop bound checks.
It is obviously more generic to teach prove about relations like
x+d<w for non-constant "w"; we already handled the case for
constant "w", so we just want to learn that if d<0, then x+d<w
proves that x<w.
To be able to remove the code from findIndVar, we also need
to teach prove that len() and cap() are always non-negative.
This CL allows to prove 633 more checks in cmd+std. Most
of them are cases where the code was already testing before
accessing a slice but the compiler didn't know it. For instance,
take strings.HasSuffix:
func HasSuffix(s, suffix string) bool {
return len(s) >= len(suffix) && s[len(s)-len(suffix):] == suffix
}
When suffix is a literal string, the compiler now understands
that the explicit check is enough to not emit a slice check.
I also found a loopbce test that was incorrectly
written to detect an overflow but had a off-by-one (on the
conservative side), so it unexpectly passed with this CL; I
changed it to really trigger the overflow as intended.
Change-Id: Ib5abade337db46b8811425afebad4719b6e46c4a
Reviewed-on: https://go-review.googlesource.com/105635
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
To be effective, this also requires being able to relax constraints
on min/max bound inclusiveness; they are now exposed through a flags,
and prove has been updated to handle it correctly.
Change-Id: I3490e54461b7b9de8bc4ae40d3b5e2fa2d9f0556
Reviewed-on: https://go-review.googlesource.com/104041
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Test both minimum and maximum bound, and prepare
formatting for more advanced tests (inclusive / esclusive bounds).
Change-Id: Ibe432916d9c938343bc07943798bc9709ad71845
Reviewed-on: https://go-review.googlesource.com/104040
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reuse findIndVar to discover induction variables, and then
register the facts we know about them into the facts table
when entering the loop block.
Moreover, handle "x+delta > w" while updating the facts table,
to be able to prove accesses to slices with constant offsets
such as slice[i-10].
Change-Id: I2a63d050ed58258136d54712ac7015b25c893d71
Reviewed-on: https://go-review.googlesource.com/104038
Run-TryBot: Giovanni Bajo <rasky@develer.com>
Reviewed-by: David Chase <drchase@google.com>
When a branch is followed, we apply the relation as described
in the domain relation table. In case the relation is in the
positive domain, we can also infer an unsigned relation if,
by that point, we know that both operands are non-negative.
Fixes#20393
Change-Id: Ieaf0c81558b36d96616abae3eb834c788dd278d5
Reviewed-on: https://go-review.googlesource.com/100278
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: David Chase <drchase@google.com>
There are several things combined in this change.
First, eliminate the gobitvector type in favor
of adding a ptrbit method to bitvector.
In non-performance-critical code, use that method.
In performance critical code, though, load the bitvector data
one byte at a time and iterate only over set bits.
To support that, add and use sys.Ctz8.
name old time/op new time/op delta
StackCopyPtr-8 81.8ms ± 5% 78.9ms ± 3% -3.58% (p=0.000 n=97+96)
StackCopy-8 65.9ms ± 3% 62.8ms ± 3% -4.67% (p=0.000 n=96+92)
StackCopyNoCache-8 105ms ± 3% 102ms ± 3% -3.38% (p=0.000 n=96+95)
Change-Id: I00b80f45612708bd440b1a411a57fa6dfa24aa74
Reviewed-on: https://go-review.googlesource.com/109716
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
getArgInfo is called a lot during stack copying.
In the common case it doesn't do much work,
but it cannot be inlined.
This change works around that.
name old time/op new time/op delta
StackCopyPtr-8 108ms ± 5% 96ms ± 4% -10.40% (p=0.000 n=20+20)
StackCopy-8 82.6ms ± 3% 78.4ms ± 6% -5.15% (p=0.000 n=19+20)
StackCopyNoCache-8 130ms ± 3% 122ms ± 3% -6.44% (p=0.000 n=20+20)
Change-Id: If7d8a08c50a4e2e76e4331b399396c5dbe88c2ce
Reviewed-on: https://go-review.googlesource.com/108945
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Currently, when the runtime looks up the stack map for a frame, it
uses frame.continpc - 1 unless continpc is the function entry PC, in
which case it uses frame.continpc. As a result, if continpc is the
function entry point (which happens for deferred frames), it will
actually look up the stack map *following* the first instruction.
I think, though I am not positive, that this is always okay today
because the first instruction of a function can never change the stack
map. It's usually not a CALL, so it doesn't have PCDATA. Or, if it is
a CALL, it has to have the entry stack map.
But we're about to start emitting stack maps at every instruction that
changes them, which means the first instruction can have PCDATA
(notably, in leaf functions that don't have a prologue).
To prepare for this, tweak how the runtime looks up stack map indexes
so that if continpc is the function entry point, it directly uses the
entry stack map.
For #24543.
Change-Id: I85aa818041cd26aff416f7b1fba186e9c8ca6568
Reviewed-on: https://go-review.googlesource.com/109349
Reviewed-by: Rick Hudson <rlh@golang.org>
This instruction was introduced on the z14 to accelerate "limbified"
multiplications for certain cryptographic algorithms. This change allows
it to be used in Go assembly.
Change-Id: Ic93dae7fec1756f662874c08a5abc435bce9dd9e
Reviewed-on: https://go-review.googlesource.com/109695
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Current optab entries are unordered, because the new instructions
are added at the end of the optab. The patch reorders them by comments
in optab, such as arithmetic operations, logical operations and a
series of load/store etc.
The patch removes the VMOVS opcode because FMOVS already has the same
operation.
Change-Id: Iccdf89ecbb3875b9dfcb6e06be2cc19c7e5581a2
Reviewed-on: https://go-review.googlesource.com/109896
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Return a non-zero exit code if the WebAssembly host fails to compile
the WebAssmbly bytecode to machine code.
Change-Id: I774309db2872b6a2de77a1b0392608058414160d
Reviewed-on: https://go-review.googlesource.com/110097
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The init function and runtime.addmoduledata were not added when
building plugin, which caused the runtime could not find the
module.
Testplugin is still not enabled on linux/arm64
(https://go.googlesource.com/go/+/master/src/cmd/dist/test.go#948)
because the gold linker on the builder is too old, which fails
with an internal error (see issue #17138). I tested locally and
it passes.
Fixes#24940.
Updates #17138.
Change-Id: I26aebca6c38a3443af0949471fa12b6d550e8c6c
Reviewed-on: https://go-review.googlesource.com/109917
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
mips64 softfloat support is based on mips implementation and introduces
new enviroment variable GOMIPS64.
GOMIPS64 is a GOARCH=mips64{,le} specific option, for a choice between
hard-float and soft-float. Valid values are 'hardfloat' (default) and
'softfloat'. It is passed to the assembler as
'GOMIPS64_{hardfloat,softfloat}'.
Change-Id: I7f73078627f7cb37c588a38fb5c997fe09c56134
Reviewed-on: https://go-review.googlesource.com/108475
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As a follow-up to the first README for cmd/compile/internal/ssa.
Since this is the parent package for all the compiler packages, this
README serves as an overview of the compiler and its packages. As more
READMEs are added for specific parts with more detail, such as ssa's,
they can be linked from this one.
Thanks to Iskander Sharipov, Josh Bleecher Snyder, Matthew Dempsky,
Alberto Donizetti, and Robert Griesemer for helping with all the details
in this document.
Change-Id: I820a535e25dce86ccc667ce1c6e92b75fc32f3af
Reviewed-on: https://go-review.googlesource.com/103935
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If the vetted function supplies zero arguments, previously you would
get an error message like this:
Printf format %v reads arg #1, but call has only 0 args
"has only 0 args" is an odd construction, and "has 0 args" sounds
better. Getting rid of "only" in all cases simplifies the code and
reads just as well.
Change-Id: I4706dfe4a75f13bf4db9c0650e459ca676710752
Reviewed-on: https://go-review.googlesource.com/109457
Run-TryBot: Kevin Burke <kev@inburke.com>
Run-TryBot: David Symonds <dsymonds@golang.org>
Reviewed-by: David Symonds <dsymonds@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Simplify some C-style loops with range statements, and move some
declarations closer to their uses.
While at it, ensure that all the SymbolType consts are typed.
Change-Id: I04b06afb2c1fb249ef8093a0c5cca0a597d1e05c
Reviewed-on: https://go-review.googlesource.com/105217
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Using oldname+resolve is how typecheck handles this anyway.
Passes toolstash -cmp, with both -iexport enabled and disabled.
Change-Id: I12b0f0333d6b86ce6bfc4d416c461b5f15c1110d
Reviewed-on: https://go-review.googlesource.com/109715
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Getcallerpc/sp no longer takes argument.
Change-Id: I80b30020e798990c59c8ffd0a4e078af6a75aea0
Reviewed-on: https://go-review.googlesource.com/109696
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also change tasks to be represented as "slices" instead of
asynchronous events which are more efficiently represented in trace
viewer data model. This change allows to utilize the flow events
(arrows) to represent task hierarchies.
Introduced RegionArgs and TaskArgs where the task id infomation and
goroutine id informations are stored for information-purpose.
Change-Id: I11bec7dd716fdfc5f94ea39661b2e51344367a6f
Reviewed-on: https://go-review.googlesource.com/109337
Reviewed-by: Heschi Kreinick <heschi@google.com>
getcallersp is intrinsified, and so the dummy arg is no longer
needed. Remove it, as well as a few dummy args that are solely
to feed getcallersp.
Change-Id: Ibb6c948ff9c56537042b380ac3be3a91b247aaa6
Reviewed-on: https://go-review.googlesource.com/109596
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The example in the 'A web server' section of the effective Go document
uses Google's image charts API (at chart.apis.google.com).
The service is now deprecated (see developers.google.com/chart/image),
and visiting http://chart.apis.google.com gives a 404. The endpoint is
still active, so the Go code in the example still works, but there's
no point in making the link clickable by the user if the page returns
a 404.
Change the element to `<code>`.
Change-Id: Ie67f4723cfa636e3dc1460507055b6bbb2b0970c
Reviewed-on: https://go-review.googlesource.com/109576
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
'%SystemRoot%/System32/chcp.com' is a tool on Windows that
is used to change the active code page in the console.
'go test os/exec' can fail with:
"'chcp' is not recognized as an internal or external command"
The test uses a custom PATH variable but does not include
'%SystemRoot%/System32'. Always append that to PATH.
Updates #24709
Change-Id: I1ab83b326072e3f0086b391b836234bcfd8a1fb7
GitHub-Last-Rev: fb930529bb
GitHub-Pull-Request: golang/go#25088
Reviewed-on: https://go-review.googlesource.com/109361
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
'%SystemRoot%/System32/chcp.com' is a tool on Windows that
is used to change the active code page in the console.
'go test path/filepath' can fail with:
"'chcp' is not recognized as an internal or external command"
The test uses a custom PATH variable but does not include
'%SystemRoot%/System32'. Always append that to PATH.
Updates #24709
Change-Id: Ib4c83ffdcc5dd6eb7bb34c07386cf2ab61dcae57
GitHub-Last-Rev: fac92613cc
GitHub-Pull-Request: golang/go#25089
Reviewed-on: https://go-review.googlesource.com/109362
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
On amd64, Ctz must include special handling of zeros.
But the prove pass has enough information to detect whether the input
is non-zero, allowing a more efficient lowering.
Introduce new CtzNonZero ops to capture and use this information.
Benchmark code:
func BenchmarkVisitBits(b *testing.B) {
b.Run("8", func(b *testing.B) {
for i := 0; i < b.N; i++ {
x := uint8(0xff)
for x != 0 {
sink = bits.TrailingZeros8(x)
x &= x - 1
}
}
})
// and similarly so for 16, 32, 64
}
name old time/op new time/op delta
VisitBits/8-8 7.27ns ± 4% 5.58ns ± 4% -23.35% (p=0.000 n=28+26)
VisitBits/16-8 14.7ns ± 7% 10.5ns ± 4% -28.43% (p=0.000 n=30+28)
VisitBits/32-8 27.6ns ± 8% 19.3ns ± 3% -30.14% (p=0.000 n=30+26)
VisitBits/64-8 44.0ns ±11% 38.0ns ± 5% -13.48% (p=0.000 n=30+30)
Fixes#25077
Change-Id: Ie6e5bd86baf39ee8a4ca7cadcf56d934e047f957
Reviewed-on: https://go-review.googlesource.com/109358
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
