The paths for the other "go" commands in this file were fixed in CL 223741,
but this one was missed (and run.bat is not caught by the builders).
Change-Id: Iba1efddc7d2fbe6af39c39d643508decc954bbc5
Reviewed-on: https://go-review.googlesource.com/c/go/+/234758
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
In certain cases the HTTP/2 stack needs to resend a request.
It obtains a fresh body to send by calling req.GetBody.
This call was missing from the path where the HTTP/2
round tripper returns ErrSkipAltProtocol, meaning fall back
to HTTP/1.1. The result was that the HTTP/1.1 fallback
request was sent with no body at all.
This CL changes that code path to rewind the body before
falling back to HTTP/1.1. But rewinding the body is easier
said than done. Some requests have no GetBody function,
meaning the body can't be rewound. If we need to rewind and
can't, that's an error. But if we didn't read anything, we don't
need to rewind. So we have to track whether we read anything,
with a new ReadCloser wrapper. That in turn requires adding
to the couple places that unwrap Body values to look at the
underlying implementation.
This CL adds the new rewinding code in the main retry loop
as well.
The new rewindBody function also takes care of closing the
old body before abandoning it. That was missing in the old
rewind code.
Thanks to Aleksandr Razumov for CL 210123
and to Jun Chen for CL 234358, both of which informed
this CL.
Fixes#32441.
Change-Id: Id183758526c087c6b179ab73cf3b61ed23a2a46a
Reviewed-on: https://go-review.googlesource.com/c/go/+/234894
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
All GDB tests currently ignore non-zero exit statuses. When tests
flakes, we don't even know if GDB exited successfully or not.
Add checks for non-zero exits, which are not expected.
Furthermore, always log the output from GDB. The tests are currently
inconsistent about whether they always log, or only on error.
Updates #39021
Change-Id: I7af1d795fc2fdf58093cb2731d616d4aa44e9996
Reviewed-on: https://go-review.googlesource.com/c/go/+/235282
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When the output file is mmap'd, OutBuf.Close currently munmap the
file but doesn't actually close the file descriptor. This CL
makes it actually close the FD.
Change-Id: I053c5592ae95497228c50ce6a267b3b48f0af6d6
Reviewed-on: https://go-review.googlesource.com/c/go/+/235417
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Uses the `cfg.BuildN` flag to avoid deleting inside the `if cleanCache`
block. Introduces a test in src/cmd/go/testdata/script.
Fixes#39250
Change-Id: I857c441b1d7aa7c68cfd646d6833e6eaca5b18d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/235140
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
If GOPROXY is "", we set it to the default value,
"https://proxy.golang.org,direct". However, if GOPROXY is a non-empty
string that doesn't contain any URLs or keywords, we treat it as
either "off" or "noproxy", which can lead to some strange errors.
This change reports an error for this kind of GOPROXY value.
For #39180
Change-Id: If2e6e39d6f74c708e5ec8f90e9d4880e0e91894f
Reviewed-on: https://go-review.googlesource.com/c/go/+/234857
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
This fixes a bug in CL 228777 which disallowed
a MaxPathLen of -1 without IsCA, even though the
x509.Certificate documentation indicates that
MaxPathLen of -1 is considered "unset".
Updates #38216
Change-Id: Ib7240e00408d060f27567be8b820d0eee239256f
Reviewed-on: https://go-review.googlesource.com/c/go/+/235280
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Set linker explicitly to lld because the default does not work on NDK
versions r19c, r20, r20b and r21. NDK 18b (or earlier) based builds
will need to specify -fuse-ld=gold.
Fixes#38838
Change-Id: Ib75f71fb9896b843910f41bd12aa1e36868fa9b3
GitHub-Last-Rev: eeaa171604
GitHub-Pull-Request: golang/go#39217
Reviewed-on: https://go-review.googlesource.com/c/go/+/235017
Reviewed-by: Elias Naur <mail@eliasnaur.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add two no op instructions following svc on openbsd/arm64 and swi on openbsd/arm.
All except some of the most recent arm64 processors have a speculative execution
flaw that occurs across a syscall boundary, which cannot be mitigated in the
kernel. In order to protect against this leak a speculation barrier needs to be
placed after an svc or swi instruction.
In order to avoid the performance impact of these instructions, the OpenBSD 6.7
kernel returns execution two instructions past the svc or swi call. For now two
hardware no ops are added, which allows syscalls to work with both 6.6 and 6.7.
These should be replaced with real speculation barriers once OpenBSD 6.8 is
released.
Updates #36435
Change-Id: I06153cb0998199242cca8761450e53599c3e7de4
Reviewed-on: https://go-review.googlesource.com/c/go/+/234381
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 235017 is about to change the default Android linker to lld. lld doesn't
support the --compress-debug-sections=zlib-gnu flag, but linkerFlagSupported
doesn't take any alternative linkers specified with -fuse-ld into account.
Updates #38838
Change-Id: I5f7422c06d40dedde2e4b070fc48398e8f822190
Reviewed-on: https://go-review.googlesource.com/c/go/+/235157
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The parallel chatty tests added in CL 229085 fail on the
solaris-amd64-oraclerel builder, because a +NN:NN offset time zone is
used. Allow for the `+` character in the corresponding regex to fix
these tests. Also move the '-' to the end of the character class, so it
is not interpreted as the range 9-T.
Change-Id: Iec9ae82ba45d2490176f274f0dc6812666eae718
Reviewed-on: https://go-review.googlesource.com/c/go/+/234978
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Specifically, this change documents the behavior of Unmarshal when a
SEQUENCE contains trailing elements.
For context Unmarshal treats trailing elements of a SEQUENCE that do not
have matching struct fields as valid, as this is how ASN.1 structures
are typically extended. This can be somewhat confusing as you might
expect those elements to be appended to rest, but rest is really only
for trailing data unrelated to the structure being parsed (i.e. if you
append a second sequence to b, it would be returned in rest).
Fixes#35680
Change-Id: Ia2c68b2f7d8674d09e859b4b7f9aff327da26fa0
Reviewed-on: https://go-review.googlesource.com/c/go/+/233537
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
The existing example is needlessly complex.
You have to know that t.Sub returns a Duration
and also have to mentally subtract the two times
to understand what duration should be printed.
Rewrite to focus on just the Duration.String operation.
Change-Id: I00765b6019c07a6ff03022625b556c2b9ba87c09
Reviewed-on: https://go-review.googlesource.com/c/go/+/234893
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A zombie slot is a slot that is marked, but isn't allocated. This can
indicate a bug in the GC, or a bad use of unsafe.Pointer. Currently,
the sweeper has best-effort detection for zombie slots: if there are
more marked slots than allocated slots, then there must have been a
zombie slot. However, this is imprecise since it only compares totals
and it reports almost no information that may be helpful to debug the
issue.
Add a precise check that compares the mark and allocation bitmaps and
reports detailed information if it detects a zombie slot.
No appreciable effect on performance as measured by the sweet
benchmarks:
name old time/op new time/op delta
BiogoIgor 15.8s ± 2% 15.8s ± 2% ~ (p=0.421 n=24+25)
BiogoKrishna 15.6s ± 2% 15.8s ± 5% ~ (p=0.082 n=22+23)
BleveIndexBatch100 4.90s ± 3% 4.88s ± 2% ~ (p=0.627 n=25+24)
CompileTemplate 204ms ± 1% 205ms ± 0% +0.22% (p=0.010 n=24+23)
CompileUnicode 77.8ms ± 2% 78.0ms ± 1% ~ (p=0.236 n=25+24)
CompileGoTypes 729ms ± 0% 731ms ± 0% +0.26% (p=0.000 n=24+24)
CompileCompiler 3.52s ± 0% 3.52s ± 1% ~ (p=0.152 n=25+25)
CompileSSA 8.06s ± 1% 8.05s ± 0% ~ (p=0.192 n=25+24)
CompileFlate 132ms ± 1% 132ms ± 1% ~ (p=0.373 n=24+24)
CompileGoParser 163ms ± 1% 164ms ± 1% +0.32% (p=0.003 n=24+25)
CompileReflect 453ms ± 1% 455ms ± 1% +0.39% (p=0.000 n=22+22)
CompileTar 181ms ± 1% 181ms ± 1% +0.20% (p=0.029 n=24+21)
CompileXML 244ms ± 1% 244ms ± 1% ~ (p=0.065 n=24+24)
CompileStdCmd 15.8s ± 2% 15.7s ± 2% ~ (p=0.059 n=23+24)
FoglemanFauxGLRenderRotateBoat 13.4s ±11% 12.8s ± 0% ~ (p=0.377 n=25+24)
FoglemanPathTraceRenderGopherIter1 18.6s ± 0% 18.6s ± 0% ~ (p=0.696 n=23+24)
GopherLuaKNucleotide 28.7s ± 4% 28.6s ± 5% ~ (p=0.700 n=25+25)
MarkdownRenderXHTML 250ms ± 1% 248ms ± 1% -1.01% (p=0.000 n=24+24)
[Geo mean] 1.60s 1.60s -0.11%
(https://perf.golang.org/search?q=upload:20200517.6)
For #38702.
Change-Id: I8af1fefd5fbf7b9cb665b98f9c4b73d1d08eea81
Reviewed-on: https://go-review.googlesource.com/c/go/+/234100
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The go/build package uses the "go" tool from the user's environment,
but its tests should not assume that that tool is in any particular
state, let alone appropriate for running the test.
Instead, explicitly use testenv.GoTool, adding it to $PATH in a
TestMain when necessary.
Fixes#39199Fixes#39198
Change-Id: I56618a55ced473e75dd96eeb3a8f7084e2e64d02
Reviewed-on: https://go-review.googlesource.com/c/go/+/234880
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
When a locked M wants to start a new M, it hands off to the template
thread to actually call clone and start the thread. The template thread
is lazily created the first time a thread is locked (or if cgo is in
use).
stoplockedm will release the P (_Pidle), then call handoffp to give the
P to another M. In the case of a pending STW, one of two things can
happen:
1. handoffp starts an M, which does acquirep followed by schedule, which
will finally enter _Pgcstop.
2. handoffp immediately enters _Pgcstop. This only occurs if the P has
no local work, GC work, and no spinning M is required.
If handoffp starts an M, and must create a new M to do so, then newm
will simply queue the M on newmHandoff for the template thread to do the
clone.
When a stop-the-world is required, stopTheWorldWithSema will start the
stop and then wait for all Ps to enter _Pgcstop. If the template thread
is not fully created because startTemplateThread gets stopped, then
another stoplockedm may queue an M that will never get created, and the
handoff P will never leave _Pidle. Thus stopTheWorldWithSema will wait
forever.
A sequence to trigger this hang when STW occurs can be visualized with
two threads:
T1 T2
------------------------------- -----------------------------
LockOSThread LockOSThread
haveTemplateThread == 0
startTemplateThread
haveTemplateThread = 1
newm haveTemplateThread == 1
preempt -> schedule g.m.lockedExt++
gcstopm -> _Pgcstop g.m.lockedg = ...
park g.lockedm = ...
return
... (any code)
preempt -> schedule
stoplockedm
releasep -> _Pidle
handoffp
startm (first 3 handoffp cases)
newm
g.m.lockedExt != 0
Add to newmHandoff, return
park
Note that the P in T2 is stuck sitting in _Pidle. Since the template
thread isn't running, the new M will not be started complete the
transition to _Pgcstop.
To resolve this, we disable preemption around the assignment of
haveTemplateThread and the creation of the template thread in order to
guarantee that if handTemplateThread is set then the template thread
will eventually exist, in the presence of stops.
Fixes#38931
Change-Id: I50535fbbe2f328f47b18e24d9030136719274191
Reviewed-on: https://go-review.googlesource.com/c/go/+/232978
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In #24929, we decided to stream chatty test output. It looks like,
foo_test.go:138: TestFoo/sub-1: hello from subtest 1
foo_test.go:138: TestFoo/sub-2: hello from subtest 2
In this CL, we refactor the output to be grouped by === CONT lines, preserving
the old test-file-before-log-line behavior:
=== CONT TestFoo/sub-1
foo_test.go:138 hello from subtest 1
=== CONT TestFoo/sub-2
foo_test.go:138 hello from subtest 2
This should remove a layer of verbosity from tests, and make it easier to group
together related lines. It also returns to a more familiar format (the
pre-streaming format), whilst still preserving the streaming feature.
Fixes#38458
Change-Id: Iaef94c580d69cdd541b2ef055aa004f50d72d078
Reviewed-on: https://go-review.googlesource.com/c/go/+/229085
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Currently sysmon is not stopped when the world is stopped, which is
in general a difficult thing to do. The result of this is that when
tracing starts and the value of trace.enabled changes, it's possible
for sysmon to fail to emit an event when it really should. This leads to
traces which the execution trace parser deems inconsistent.
Fix this by putting all of sysmon's work behind a new lock sysmonlock.
StartTrace and StopTrace both acquire this lock after stopping the world
but before performing any work in order to ensure sysmon sees the
required state change in tracing. This change is expected to slow down
StartTrace and StopTrace, but will help ensure consistent traces are
generated.
Updates #29707.
Fixes#38794.
Change-Id: I64c58e7c3fd173cd5281ffc208d6db24ff6c0284
Reviewed-on: https://go-review.googlesource.com/c/go/+/234617
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
On darwin, we preallocate file storage space with fcntl
F_ALLOCATEALL in F_PEOFPOSMODE mode. This is specified as
allocating from the physical end of the file. So the size we give
it should be the increment, instead of the total size.
Fixes#39044.
Change-Id: I10c7ee8d51f237b4a7604233ac7abc6f91dcd602
Reviewed-on: https://go-review.googlesource.com/c/go/+/234481
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
When the concurrent back end is not enabled, it is possible to have a
scenario where: we compile a specific inlinable non-pointer-receiver
method T.M, then at some point later on in the compilation we visit a
type that triggers generation of a pointer-receiver wrapper (*T).M,
which then results in an inline of T.M into (*T).M. This introduces
subtle differences in the DWARF as compared with when the concurrent
back end is enabled (in the concurrent case, by the time we run the
SSA back end on T.M is is marked as being inlined, whereas in the
non-current case it is not marked inlined).
As a fix, at the point where we would normally compile a given
function in the xtop list right away, if the function is a method AND
is inlinable AND hasn't been inlined, then delay its compilation until
compileFunctions (so as to make sure that when we do compile it, all
possible inlining has been complete). In addition, make sure that
the abstract function symbol for the inlined function gets recorded
correctly.
Fixes#38068.
Change-Id: I57410ab5658bd4ee5b4b80750518e9b20fd6ba52
Reviewed-on: https://go-review.googlesource.com/c/go/+/234178
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
modfetch.TryProxies ranks errors returned by GOPROXY entries by
usefulness. It returns the error of the highest rank from the last
proxy. Errors from "direct" and "noproxy" are most useful, followed by
errors other than ErrNotExist, followed by ErrNotExist.
This change ranks errUseProxy with ErrNotExist even though it's
reported by "noproxy". There is almost always a more useful message
than "path does not match GOPRIVATE/GONOPROXY".
Fixes#39180
Change-Id: Ifa5b96462d7bf411e6d2d951888465c839d42471
Reviewed-on: https://go-review.googlesource.com/c/go/+/234687
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When copying a stack, we
1. allocate a new stack,
2. adjust pointers pointing to the old stack to pointing to the
new stack.
If the GC is running on another thread concurrently, on a machine
with weak memory model, the GC could observe the adjusted pointer
(e.g. through gp._defer which could be a special heap-to-stack
pointer), but not observe the publish of the new stack span. In
this case, the GC will see the adjusted pointer pointing to an
unallocated span, and throw. Fixing this by adding a publication
barrier between the allocation of the span and adjusting pointers.
One testcase for this is TestDeferHeapAndStack in long mode. It
fails reliably on linux-mips64le-mengzhuo builder without the fix,
and passes reliably after the fix.
Fixes#35541.
Change-Id: I82b09b824fdf14be7336a9ee853f56dec1b13b90
Reviewed-on: https://go-review.googlesource.com/c/go/+/234478
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
On Windows, calling syscall.Open(file, O_CREAT|O_TRUNC, 0) for a file
that already exists would change the file to be read-only.
That is not how the Unix syscall.Open behaves, so avoid it on
Windows by calling CreateFile twice if necessary.
Fixes#38225
Change-Id: I70097fca8863df427cc8a97b9376a9ffc69c6318
Reviewed-on: https://go-review.googlesource.com/c/go/+/234534
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
On Windows, some of gcc command (like msys2 native) output NUL as a file.
Fixes#36000
Change-Id: I02c632fa2d710a011d79f24d5beee4bc57ad994e
Reviewed-on: https://go-review.googlesource.com/c/go/+/233977
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This removes the GOAMD64 environment variable and its documentation.
The value is instead supplied by a compiled-in constant.
Note that function alignment is also dependent on the value of
the (removed) flag; it is 32 for aligned jumps, 16 if not.
When the flag-dependent logic is removed, it will be 32.
Updates #35881.
Change-Id: Ic41c0b9833d2e8a31fa3ce8067d92aa2f165bf72
Reviewed-on: https://go-review.googlesource.com/c/go/+/231600
Reviewed-by: Austin Clements <austin@google.com>
This will hopefully address the occasional "runtime: out of memory"
failures observed on the openbsd-arm-jsing builder:
https://build.golang.org/log/c296d866e5d99ba401b18c1a2ff3e4d480e5238c
Also make the "spin" and "winch" loops concurrent instead of
sequential to cut down the test's running time.
Finally, change Block to coordinate by closing stdin instead of
sending SIGINT. The SIGINT handler wasn't necessarily registered by
the time the signal was sent.
Updates #20400
Updates #39043
Change-Id: Ie12fc75b87e33847dc25a12edb4126db27492da6
Reviewed-on: https://go-review.googlesource.com/c/go/+/234538
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently in (*addrRanges).removeGreaterEqual we use
(addrRange).subtract with a range from specified address to "infinity"
which is supposed to be maxOffAddr. However, maxOffAddr is necessarily
an inclusive bound on the address space, because on many platforms an
exclusive bound would overflow back to 0.
On some platforms like mips and mipsle, the address space is smaller
than what's representable in a pointer, so if there's a range which hits
the top of the address space (such as in the pageAlloc tests), the limit
doesn't overflow, but maxOffAddr is inclusive, so any attempt to prune
this range with (*addrRange).removeGreaterEqual causes a failure, since
the range passed to subtract is contained within the address range which
touches the top of the address space.
Another problem with using subtract here is that addr and
maxOffAddr.addr() may not be in the same segment which could cause
makeAddrRange to panic. While this unlikely to happen, on some platforms
such as Solaris it is possible.
Fix these issues by not using subtract at all. Create a specific
implementation of (addrRange).removeGreaterEqual which side-steps all of
this by not having to worry about the top of the address space at all.
Fixes#39128.
Change-Id: Icd5b587b1a3d32a5681fb76cec4c001401f5756f
Reviewed-on: https://go-review.googlesource.com/c/go/+/234457
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
In CL 231958, TempDir was changed to create a new temp directory on
each allocation, on the theory that it is easy to save in a variable
for callers that want the same directory repeatedly. Apply that
transformation here.
Updates #38850
Change-Id: Ibb014095426c33038e0a2c95303579cf95d5c3ba
Reviewed-on: https://go-review.googlesource.com/c/go/+/234582
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We use a single parent directory for all temporary directories
created by a test so they're all kept together.
Fixes#38850
Change-Id: If8edae10c5136efcbcf6fd632487d198b9e3a868
Reviewed-on: https://go-review.googlesource.com/c/go/+/231958
Reviewed-by: Russ Cox <rsc@golang.org>
Fold the descriptions of testing.T.Deadline and TestMain related changes
into the existing section for package testing.
Also link T.Deadline to its godoc.
Change-Id: I732c45fb879305099cb8a51a77ef11fba1b2f1e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/234557
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This was causing issues when fuzzing with
TestMarshalUnmarshal since the test would
occassionally set the version to VersionTLS13,
which would fail when unmarshaling. The check
doesn't add much in practice, and there is no
harm in removing it to de-flake the test.
Fixes#38902
Change-Id: I0906c570e9ed69c85fdd2c15f1b52f9e372c62e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/234486
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
v0.3.0 is a tag on 859b3ef565e2, the version that was already being
used. This change is a no-op, except for letting us use a release
version instead of a pseudo-version.
For #36905
Change-Id: I70b8ce2a3f1451f5602c469501362d7a6a673b12
Reviewed-on: https://go-review.googlesource.com/c/go/+/234002
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
The Plan 9 runtime startup was enabling notes (like Unix signals)
before the gsignal stack was allocated. This left a small window
of time where an interrupt (eg by the parent killing a subprocess
quickly after exec) would cause a null pointer dereference in
sigtramp. This would leave the interrupted process suspended in
'broken' state instead of exiting. We've observed this on the
builders, where it can make a test time out waiting for the broken
process to terminate.
Updates #38772
Change-Id: I54584069fd3109595f06c78724c1f6419e028aab
Reviewed-on: https://go-review.googlesource.com/c/go/+/234397
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
The runtime needs to find the PC of the deferreturn call in a few
places. So for functions that have defer, we record the PC of
deferreturn call in its funcdata.
For very large binaries, the deferreturn call could be made
through a trampoline. The current code of finding deferreturn PC
fails in this case. This CL handles the trampoline as well.
Fixes#39049.
Change-Id: I929be54d6ae436f5294013793217dc2a35f080d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/234105
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Found this while deleting the old code. This should be data2.
Change-Id: I1232fac22ef63bb3a3f25a0558537cc371af3bd9
Reviewed-on: https://go-review.googlesource.com/c/go/+/234098
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
This part of the test has been flaky despite repeated attempts to fix it,
and it is unclear what exactly it is testing. Remove it.
Fixes#24616.
Change-Id: If7234f99dd3d3e92f15ccb94ee13e75c6da12537
Reviewed-on: https://go-review.googlesource.com/c/go/+/233942
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Don't include SCONST symbols in the symbol table when
NotInSymbolTable is set. This is what the old code (genasmsym)
does.
In fact, SCONST symbol is only emitted by the field tracking
code, and is always NotInSymbolTable. So we should just not
include them at all, or not generate SCONST symbols at all. But
at this late stage I'll just restore the old behavior.
Change-Id: If6843003e16701d45b8c67b2297098a7babdec52
Reviewed-on: https://go-review.googlesource.com/c/go/+/233997
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently maxOffAddr is defined in terms of the whole 64-bit address
space, assuming that it's all supported, by using ^uintptr(0) as the
maximal address in the offset space. In reality, the maximal address in
the offset space is (1<<heapAddrBits)-1 because we don't have more than
that actually available to us on a given platform.
On most platforms this is fine, because arenaBaseOffset is just
connecting two segments of address space, but on AIX we use it as an
actual offset for the starting address of the available address space,
which is limited. This means using ^uintptr(0) as the maximal address in
the offset address space causes wrap-around, especially when we just
want to represent a range approximately like [addr, infinity), which
today we do by using maxOffAddr.
To fix this, we define maxOffAddr more appropriately, in terms of
(1<<heapAddrBits)-1.
This change also redefines arenaBaseOffset to not be the negation of the
virtual address corresponding to address zero in the virtual address
space, but instead directly as the virtual address corresponding to
zero. This matches the existing documentation more closely and makes the
logic around arenaBaseOffset decidedly simpler, especially when trying
to reason about its use on AIX.
Fixes#38966.
Change-Id: I1336e5036a39de846f64cc2d253e8536dee57611
Reviewed-on: https://go-review.googlesource.com/c/go/+/233497
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
CL 233857 fixed the underlying issue for #37246,
which had arisen again as #38916.
Add the test case from #37246 to ensure it stays fixed.
Fixes#37246
Change-Id: If7fd75a096d2ce4364dc15509253c3882838161d
Reviewed-on: https://go-review.googlesource.com/c/go/+/233941
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
When tuple generators and selectors are eliminated as part of the
CSE pass we may end up with tuple selectors that are in different
blocks to the tuple generators that they correspond to. This breaks
the invariant that tuple generators and their corresponding
selectors must be in the same block. Therefore after CSE this
situation must be corrected.
Unfortunately the fixup code did not take into account that selectors
could be eliminated by CSE. It assumed that only the tuple generators
could be eliminated. In some situations this meant that it got into
a state where it was replacing references to selectors with references
to dead selectors in the wrong block.
To fix this we move the fixup code after the CSE rewrites have been
applied. This removes any difficult-to-reason-about interactions
with the CSE rewriter.
Fixes#38916.
Change-Id: I2211982dcdba399d03299f0a819945b3eb93b291
Reviewed-on: https://go-review.googlesource.com/c/go/+/233857
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
