Sysmon can actually get the RW lock execLock while holding the sysmon
lock (if no M is available), so there is an edge from lockRankSysmon to
lockRankRwmutexR. The stack trace is sysmon() [gets sched.sysmonlock] ->
startm() -> newm() -> newm1() -> execLock.runlock() [gets
execLock.rLock]
Change-Id: I9658659ba3899afb5219114d66b989abd50540db
Reviewed-on: https://go-review.googlesource.com/c/go/+/265721
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
With previous CLs, internal linking without cgo should work well.
Enable it by default. And stop always requiring cgo.
Enable tests that were previously disabled due to the lack of
internal linking.
Updates #38485.
Change-Id: I45125b9c263fd21d6847aa6b14ecaea3a2989b29
Reviewed-on: https://go-review.googlesource.com/c/go/+/265121
Trust: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Now that we have the G register saved, we can enable asynchronous
preemption for pure Go programs on darwin/arm64.
Updates #38485, #36365.
Change-Id: Ic654fa4dce369efe289b38d59cf1a184b358fe9e
Reviewed-on: https://go-review.googlesource.com/c/go/+/265120
Trust: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Now that we always have TLS set up, we can always save the G
register, regardless of whether cgo is used. This makes pure Go
programs signal-safe.
Updates #38485.
Change-Id: Icbc69acf0e2a5652fbcbbd074258a1a5efe87f1a
Reviewed-on: https://go-review.googlesource.com/c/go/+/265119
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Joel Sing <joel@sing.id.au>
Currently, on darwin/arm64 we set up TLS using cgo. TLS is not
set for pure Go programs. As we use libc for syscalls on darwin,
we need to save the G register before the libc call. Otherwise it
is not signal-safe, as a signal may land during the execution of
a libc function, where the G register may be clobbered.
This CL initializes TLS in Go, by calling the pthread functions
directly without cgo. This makes it possible to save the G
register to TLS in pure Go programs (done in a later CL).
Inspired by Elias's CL 209197. Write the logic in Go instead of
assembly.
Updates #38485, #35853.
Change-Id: I257ba2a411ad387b2f4d50d10129d37fec7a226e
Reviewed-on: https://go-review.googlesource.com/c/go/+/265118
Trust: Cherry Zhang <cherryyz@google.com>
Trust: Elias Naur <mail@eliasnaur.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Implement runtime.duffzero and runtime.duffcopy for riscv64.
Use obj.ADUFFZERO/obj.ADUFFCOPY for medium size, word aligned
zeroing/moving.
Change-Id: I42ec622055630c94cb77e286d8d33dbe7c9f846c
Reviewed-on: https://go-review.googlesource.com/c/go/+/237797
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Use a standard "not-equal" label that we can jump to when we
detect that the arguments are not equal. This prevents the
recombination that was noticed in #39428.
Fixes#39428
Change-Id: Ib7c6b3539f4f6046043fd7148f940fcdcab70427
Reviewed-on: https://go-review.googlesource.com/c/go/+/255317
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
It requires cgo. Also, skip the test on windows and plan9.
For #42207
Change-Id: I8522773f93bc3f9826506a41a08b86a083262e31
Reviewed-on: https://go-review.googlesource.com/c/go/+/265778
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Always use the aligned form -- the old code sometimes could
at least nominally use a misaligned field in an SSA-able struct,
even if not actually.
Fixes#42181.
Change-Id: Ibdce0985f9349da70921a37423054b85ee4200d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/265277
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Trust: David Chase <drchase@google.com>
Otherwise, if a signal occurs just after we allocated the M,
we can deadlock if the signal handler needs to allocate an M
itself.
Fixes#42207
Change-Id: I76f44547f419e8b1c14cbf49bf602c6e645d8c14
Reviewed-on: https://go-review.googlesource.com/c/go/+/265759
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
It has been observed that setgid hangs when using cgo with musl.
This fix ensures that signal 34 gets handled in an appropriate way,
like signal 33 when using glibc.
Fixes#39343
Change-Id: I89565663e2c361f62cbccfe80aaedf290bd58d57
Reviewed-on: https://go-review.googlesource.com/c/go/+/236518
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The extend information of a time zone file with last transition < now
could result in a wrong cached zone because it used the zone of the
last transition.
This could lead to wrong zones in systems with slim zoneinfo.
Fixes#42216
Change-Id: I7c57c35b5cfa58482ac7925b5d86618c52f5444d
Reviewed-on: https://go-review.googlesource.com/c/go/+/264939
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Some programs have a lot of timers that they adjust both forward and
backward in time. This can cause a large number of timerModifiedEarlier
timers. In practice these timers are used for I/O deadlines and are
rarely reached. The effect is that the runtime spends a lot of time
in adjusttimers making sure that there are no timerModifiedEarlier
timers, but the effort is wasted because none of the adjusted timers
are near the top of the timer heap anyhow.
Avoid much of this extra work by keeping track of the earliest known
timerModifiedEarlier timer. This lets us skip adjusttimers if we know
that none of the timers will be ready to run anyhow. We will still
eventually run it, when we reach the deadline of the earliest known
timerModifiedEarlier, although in practice that timer has likely
been removed. When we do run adjusttimers, we will reset all of the
timerModifiedEarlier timers, and clear our notion of when we need
to run adjusttimers again.
This effect should be to significantly reduce the number of times we
walk through the timer list in adjusttimers.
Fixes#41699
Change-Id: I38eb2be611fb34e3017bb33d0a9ed40d75fb414f
Reviewed-on: https://go-review.googlesource.com/c/go/+/258303
Trust: Ian Lance Taylor <iant@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Pretty minor concern, but after auditing the compiler/runtime for
conversions from pointers to go:notinheap types to unsafe.Pointer,
this is the only remaining one I found.
Update #42076
Change-Id: I81d5b893c9ada2fc19a51c2559262f2e9ff71c35
Reviewed-on: https://go-review.googlesource.com/c/go/+/265757
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
pointers to go:notinheap types should be treated as scalars. That
means they shouldn't be stored directly in interfaces, or directly
in reflect.Value.ptr.
Also be sure to use uintpr to compare such pointers in reflect.DeepEqual.
Fixes#42076
Change-Id: I53735f6d434e9c3108d4940bd1bae14c61ef2a74
Reviewed-on: https://go-review.googlesource.com/c/go/+/264480
Trust: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
storeType splits compound stores up into a scalar parts and a pointer parts.
The scalar part happens unconditionally, and the pointer part happens
under the guard of a write barrier check.
Types which are declared as pointers, but are represented as scalars because
they might have "bad" values, were not handled correctly here. They ended
up not getting stored in either set.
Fixes#42032
Change-Id: I46f6600075c0c370e640b807066247237f93c7ac
Reviewed-on: https://go-review.googlesource.com/c/go/+/264300
Trust: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The gofrontend has started emitting a notinheap annotation for types
marked go:notinheap.
For #41761
Change-Id: Ic8f7ffc32dbfe98ec09b3d835957f1be8e6c1208
Reviewed-on: https://go-review.googlesource.com/c/go/+/265702
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This corresponds to the feature in https://golang.org/cl/263542, since
this can be a noteworthy change to people writing tools to inspect Go
builds.
Also amend the wording to clarify that build IDs are for an entire
compiled package, not just their export data or object file.
Change-Id: I2eb295492807d5d2997a35e5e2371914cb3ad3a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/264158
Trust: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
rewrite.go has two identical functions isPowerOfTwo and
isPowerOfTwo64; the former has been there for a while, while the
latter was added together with isPowerOfTwo{8,16,32} for use in typed
rules.
This change deletes isPowerOfTwo and switch to using isPowerOfTwo64
everywhere.
Change-Id: If26c94565d2393fac6f0ba117ee7ee2fc915f7cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/265417
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Changes:
- makeValAndOff is deleted in favour of MakeValAndOff{32,64}
- canAdd is renamed to canAdd64 to uniform with existing canAdd32
- addOffset{32,64} is simplified by directly using MakeValAndOff{32,64}
- ValAndOff.Int64 is removed
Change-Id: Ic01db7fa31ddfe0aaaf1d1d77af823d48a7bee84
Reviewed-on: https://go-review.googlesource.com/c/go/+/265357
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
This change removes support in rulegen for untyped -> ssa rules.
Change-Id: I202018e191fc74f027243351bc8cf96145f2482c
Reviewed-on: https://go-review.googlesource.com/c/go/+/264679
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Instead of always polling 500ms, start with an interval of 1ms and
exponentially back off to at most 500ms. 10% jitter is added to each
interval.
This makes Shutdown more responsive when connections and listeners
close quickly.
Also removes the need for the polling interval to be changed in tests
since if tests' connections and listeners close quickly Shutdown will
also return quickly.
Fixes#42156
Change-Id: I5e59844a2980c09adebff57ae8b58817965e6db4
Reviewed-on: https://go-review.googlesource.com/c/go/+/264479
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Bryan C. Mills <bcmills@google.com>
Combine (AND m (SRWconst x)) or (SRWconst (AND m x)) when mask m is
and the shift value produce constant which can be encoded into an
RLWINM instruction.
Combine (CLRLSLDI (SRWconst x)) if the combining of the underling rotate
masks produces a constant which can be encoded into RLWINM.
Likewise for (SLDconst (SRWconst x)) and (CLRLSDI (RLWINM x)).
Combine rotate word + and operations which can be encoded as a single
RLWINM/RLWNM instruction.
The most notable performance improvements arise from the crypto
benchmarks below (GOARCH=power8 on a ppc64le/linux):
pkg:golang.org/x/crypto/blowfish goos:linux goarch:ppc64le
ExpandKeyWithSalt 52.2µs ± 0% 47.5µs ± 0% -8.88%
ExpandKey 44.4µs ± 0% 40.3µs ± 0% -9.15%
pkg:golang.org/x/crypto/ssh/internal/bcrypt_pbkdf goos:linux goarch:ppc64le
Key 57.6ms ± 0% 52.3ms ± 0% -9.13%
pkg:golang.org/x/crypto/bcrypt goos:linux goarch:ppc64le
Equal 90.9ms ± 0% 82.6ms ± 0% -9.13%
DefaultCost 91.0ms ± 0% 82.7ms ± 0% -9.12%
Change-Id: I59a0ca29face38f4ab46e37124c32906f216c4ce
Reviewed-on: https://go-review.googlesource.com/c/go/+/260798
Run-TryBot: Carlos Eduardo Seo <carlos.seo@linaro.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Carlos Eduardo Seo <carlos.seo@linaro.com>
Trust: Lynn Boger <laboger@linux.vnet.ibm.com>
It has duplicated logic with "n.isGoConst".
Passes toolstash-check.
Change-Id: I5bf871ef81c7188ca09dae29c7ff55b3a254d972
Reviewed-on: https://go-review.googlesource.com/c/go/+/265437
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Allocate a C enum object, and test if it can be assigned a value
successfully.
For #39537
Change-Id: I7b5482112486440b9d99f2ee4051328d87f45dca
GitHub-Last-Rev: 81890f40ac
GitHub-Pull-Request: golang/go#39977
Reviewed-on: https://go-review.googlesource.com/c/go/+/240697
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Change the scheduler to treat expired timers with the same approach it
uses to steal runnable G's.
Previously the scheduler ignored timers on P's not marked for
preemption. That had the downside that any G's waiting on those expired
timers starved until the G running on their P completed or was
preempted. That could take as long as 20ms if sysmon was in a 10ms
wake up cycle.
In addition, a spinning P that ignored an expired timer and found no
other work would stop despite there being available work, missing the
opportunity for greater parallelism.
With this change the scheduler no longer ignores timers on
non-preemptable P's or relies on sysmon as a backstop to start threads
when timers expire. Instead it wakes an idle P, if needed, when
creating a new timer because it cannot predict if the current P will
have a scheduling opportunity before the new timer expires. The P it
wakes will determine how long to sleep and block on the netpoller for
the required time, potentially stealing the new timer when it wakes.
This change also eliminates a race between a spinning P transitioning
to idle concurrently with timer creation using the same pattern used
for submission of new goroutines in the same window.
Benchmark analysis:
CL 232199, which was included in Go 1.15 improved timer latency over Go
1.14 by allowing P's to steal timers from P's not marked for preemption.
The benchmarks added in this CL measure that improvement in the
ParallelTimerLatency benchmark seen below. However, Go 1.15 still relies
on sysmon to notice expired timers in some situations and sysmon can
sleep for up to 10ms before waking to check timers. This CL fixes that
shortcoming with modest regression on other benchmarks.
name \ avg-late-ns go14.time.bench go15.time.bench fix.time.bench
ParallelTimerLatency-8 17.3M ± 3% 7.9M ± 0% 0.2M ± 3%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=1-8 53.4k ±23% 50.7k ±31% 252.4k ± 9%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=2-8 204k ±14% 90k ±58% 188k ±12%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=3-8 1.17M ± 0% 0.11M ± 5% 0.11M ± 2%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=4-8 1.81M ±44% 0.10M ± 4% 0.10M ± 2%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=5-8 2.28M ±66% 0.09M ±13% 0.08M ±21%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=6-8 2.84M ±85% 0.07M ±15% 0.07M ±18%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=7-8 2.13M ±27% 0.06M ± 4% 0.06M ± 9%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=8-8 2.63M ± 6% 0.06M ±11% 0.06M ± 9%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=9-8 3.32M ±17% 0.06M ±16% 0.07M ±14%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=10-8 8.46M ±20% 4.37M ±21% 5.03M ±23%
StaggeredTickerLatency/work-dur=2ms/tickers-per-P=1-8 1.02M ± 1% 0.20M ± 2% 0.20M ± 2%
name \ max-late-ns go14.time.bench go15.time.bench fix.time.bench
ParallelTimerLatency-8 18.3M ± 1% 8.2M ± 0% 0.5M ±12%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=1-8 141k ±19% 127k ±19% 1129k ± 3%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=2-8 2.78M ± 4% 1.23M ±15% 1.26M ± 5%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=3-8 6.05M ± 5% 0.67M ±56% 0.81M ±33%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=4-8 7.93M ±20% 0.71M ±46% 0.76M ±41%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=5-8 9.41M ±30% 0.92M ±23% 0.81M ±44%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=6-8 10.8M ±42% 0.8M ±41% 0.8M ±30%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=7-8 9.62M ±24% 0.77M ±38% 0.88M ±27%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=8-8 10.6M ±10% 0.8M ±32% 0.7M ±27%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=9-8 11.9M ±36% 0.6M ±46% 0.8M ±38%
StaggeredTickerLatency/work-dur=300µs/tickers-per-P=10-8 36.8M ±21% 24.7M ±21% 27.5M ±16%
StaggeredTickerLatency/work-dur=2ms/tickers-per-P=1-8 2.12M ± 2% 1.02M ±11% 1.03M ± 7%
Other time benchmarks:
name \ time/op go14.time.bench go15.time.bench fix.time.bench
AfterFunc-8 137µs ± 4% 123µs ± 4% 131µs ± 2%
After-8 212µs ± 3% 195µs ± 4% 204µs ± 7%
Stop-8 165µs ± 6% 156µs ± 2% 151µs ±12%
SimultaneousAfterFunc-8 260µs ± 3% 248µs ± 3% 284µs ± 2%
StartStop-8 65.8µs ± 9% 64.4µs ± 7% 67.3µs ±15%
Reset-8 13.6µs ± 2% 9.6µs ± 2% 9.1µs ± 4%
Sleep-8 307µs ± 4% 306µs ± 3% 320µs ± 2%
Ticker-8 53.0µs ± 5% 54.5µs ± 5% 57.0µs ±11%
TickerReset-8 9.24µs ± 2% 9.51µs ± 3%
TickerResetNaive-8 149µs ± 5% 145µs ± 5%
Fixes#38860
Updates #25471
Updates #27707
Change-Id: If52680509b0f3b66dbd1d0c13fa574bd2d0bbd57
Reviewed-on: https://go-review.googlesource.com/c/go/+/232298
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Trust: Ian Lance Taylor <iant@golang.org>
misc/cgo/test fails in 'dist test' on arm64 if the C compiler is of GCC-9.4 or
above and its 'outline atomics' feature is enabled, since the internal linking
hasn't yet supported "__attribute__((constructor))" and also mis-handles hidden
visibility.
This change addresses the problem by skipping the internal linking cases of
misc/cgo/test on linux/arm64. It fixes 'dist test' failure only, user is expected to
pass a GCC option '-mno-outline-atomics' via CGO_CFLAGS if running into the same
problem when building cgo programs using internal linking.
Updates #39466
Change-Id: I57f9e85fca881e5fd2dae6c1b4446bce9e0c1975
Reviewed-on: https://go-review.googlesource.com/c/go/+/262357
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Glob is needed for //go:embed processing.
Also change TestReadDir to be deterministic
and print more output about failures.
Change-Id: Ie22a9c5b32bda753579ff98cec1d28e3244c4e06
Reviewed-on: https://go-review.googlesource.com/c/go/+/264538
Trust: Russ Cox <rsc@golang.org>
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Previously, 2 goroutines were created in OpenDB and a comment in the DB.close() field indicated that they were canceled. Later, session Resetter () was removed, but the comment remained the same. This commit just fixes this message
Change-Id: Ie81026f51d7770e9cf8004818154021f626fb2e8
GitHub-Last-Rev: 38b338a0d1
GitHub-Pull-Request: golang/go#42191
Reviewed-on: https://go-review.googlesource.com/c/go/+/264838
Reviewed-by: Daniel Theophanes <kardianos@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Trust: Brad Fitzpatrick <bradfitz@golang.org>
Add additional rules to eliminate unnecessary sign/zero extension for riscv64.
Also where possible, replace an extension following a load with a different typed
load. This removes almost another 8,000 instructions from the go binary.
Of particular note, change Eq16/Eq8/Neq16/Neq8 to zero extend each value before
subtraction, rather than zero extending after subtraction. While this appears to
double the number of zero extensions, it often lets us completely eliminate them
as the load can already be performed in a properly typed manner.
As an example, prior to this change runtime.memequal16 was:
0000000000013028 <runtime.memequal16>:
13028: 00813183 ld gp,8(sp)
1302c: 00019183 lh gp,0(gp)
13030: 01013283 ld t0,16(sp)
13034: 00029283 lh t0,0(t0)
13038: 405181b3 sub gp,gp,t0
1303c: 03019193 slli gp,gp,0x30
13040: 0301d193 srli gp,gp,0x30
13044: 0011b193 seqz gp,gp
13048: 00310c23 sb gp,24(sp)
1304c: 00008067 ret
Whereas it now becomes:
0000000000012fa8 <runtime.memequal16>:
12fa8: 00813183 ld gp,8(sp)
12fac: 0001d183 lhu gp,0(gp)
12fb0: 01013283 ld t0,16(sp)
12fb4: 0002d283 lhu t0,0(t0)
12fb8: 405181b3 sub gp,gp,t0
12fbc: 0011b193 seqz gp,gp
12fc0: 00310c23 sb gp,24(sp)
12fc4: 00008067 ret
Change-Id: I16321feb18381241cab121c0097a126104c56c2c
Reviewed-on: https://go-review.googlesource.com/c/go/+/264659
Trust: Joel Sing <joel@sing.id.au>
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
CryptGenRandom appears to be unfavorable these days, whereas the classic
RtlGenRandom is still going strong.
This commit also moves the warnBlocked function into rand_unix, rather
than rand, because it's now only used on unix.
Fixes#33542
Change-Id: I5c02a5917572f54079d627972401efb6e1ce4057
Reviewed-on: https://go-review.googlesource.com/c/go/+/210057
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than handling sign and zero extension via rules, defer to the assembler
and use MOV pseudo-instructions. The instruction can also be omitted where the
type and size is already correct. This change results in more than 6,000
instructions being removed from the go binary (in part due to omitted
instructions, in part due to MOVBU having a more efficient implementation in
the assembler than what is used in the current ZeroExt8to{16,32,64} rules).
This will also allow for further rewriting to remove redundant sign/zero
extension.
Change-Id: I05e42fd9f09f40a69948be7de772cce8946c8744
Reviewed-on: https://go-review.googlesource.com/c/go/+/264658
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Instead of duplicating PackageOpts fields in the loaderParams struct,
embed the PackageOpts directly. Many of the fields are duplicated, and
further fields that would also be duplicated will be added in
subsequent changes.
For #36460
Change-Id: I3b0770d162e901d23ec1643183eb07c413d51e0a
Reviewed-on: https://go-review.googlesource.com/c/go/+/263138
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
This reverts CL 252478.
Reason for revert: debug/Elfhdr has no Flags fields, some other CLs has removed it.
Change-Id: Ie199ac29f382c56aaf37a2e8338f2dafe6e79297
Reviewed-on: https://go-review.googlesource.com/c/go/+/265317
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Meng Zhuo <mzh@golangcn.org>
Add support for Thread Local Storage (TLS) for linux/riscv64 with external
linking, using the initial-exec model.
Update #36641
Change-Id: I3106ef9a29cde73215830b00deff43dbec1c76e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/263478
Trust: Joel Sing <joel@sing.id.au>
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Enable c-archive, c-shared, shared and pie build modes for linux/riscv64.
Change-Id: I15a8a51b84dbbb82a5b6592aec84a7f09f0cc37f
Reviewed-on: https://go-review.googlesource.com/c/go/+/263457
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Currently, "x &^ y" gets rewriten into "x & ^y" during walk. It adds
unnecessary complexity to other parts, which must aware about this.
Instead, we can just implement "&^" in the conversion to SSA, so "&^"
can be handled like other binary operators.
However, this CL does not pass toolstash-check. It seems that implements
"&^" in the conversion to SSA causes registers allocation change.
With the parent:
obj: 00212 (.../src/runtime/complex.go:47) MOVQ X0, AX
obj: 00213 (.../src/runtime/complex.go:47) BTRQ $63, AX
obj: 00214 (.../src/runtime/complex.go:47) MOVQ "".n(SP), CX
obj: 00215 (.../src/runtime/complex.go:47) MOVQ $-9223372036854775808, DX
obj: 00216 (.../src/runtime/complex.go:47) ANDQ DX, CX
obj: 00217 (.../src/runtime/complex.go:47) ORQ AX, CX
With this CL:
obj: 00212 (.../src/runtime/complex.go:47) MOVQ X0, AX
obj: 00213 (.../src/runtime/complex.go:47) BTRQ $63, AX
obj: 00214 (.../src/runtime/complex.go:47) MOVQ $-9223372036854775808, CX
obj: 00215 (.../src/runtime/complex.go:47) MOVQ "".n(SP), DX
obj: 00216 (.../src/runtime/complex.go:47) ANDQ CX, DX
obj: 00217 (.../src/runtime/complex.go:47) ORQ AX, DX
Change-Id: I80acf8496a91be4804fb7ef3df04c19baae2754c
Reviewed-on: https://go-review.googlesource.com/c/go/+/264660
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For follow up CL, which will defer lowering OANDNOT until SSA.
Change-Id: I5a988d0b8f0ae664580f08b123811b2a31ef55c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/265040
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This change modifies addrRanges.findSucc to more efficiently find the
successor range in an addrRanges by using a binary search to narrow down
large addrRanges and iterate over no more than 8 addrRanges.
This change makes the runtime more robust against systems that may
aggressively randomize the address space mappings it gives the runtime
(e.g. Fuchsia).
For #40191.
Change-Id: If529df2abd2edb1b1496d8690ddd284ecd7138c2
Reviewed-on: https://go-review.googlesource.com/c/go/+/242679
Trust: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
