According to ARM64 manual, it is "constrained unpredictable behavior"
if the src and dst registers of some load/store instructions are same.
In order to completely prevent such unpredictable behavior, adding the
check for load/store instructions that are supported by the assembler
in the assembler.
Add test cases.
Update #25823
Change-Id: I64c14ad99ee543d778e7ec8ae6516a532293dbb3
Reviewed-on: https://go-review.googlesource.com/120660
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Rationale: small buffer optimization does not work and it has
made things slower since 2014. Until we can make it work,
we should prefer simpler code that also turns out to be more
efficient.
With this change, it's possible to use
NewBuffer(make([]byte, 0, bootstrapSize)) to get the desired
stack-allocated initial buffer since escape analysis can
prove the created slice to be non-escaping.
New implementation key points:
- Zero value bytes.Buffer performs better than before
- You can have a truly stack-allocated buffer, and it's not even limited to 64 bytes
- The unsafe.Sizeof(bytes.Buffer{}) is reduced significantly
- Empty writes don't cause allocations
Buffer benchmarks from bytes package:
name old time/op new time/op delta
ReadString-8 9.20µs ± 1% 9.22µs ± 1% ~ (p=0.148 n=10+10)
WriteByte-8 28.1µs ± 0% 26.2µs ± 0% -6.78% (p=0.000 n=10+10)
WriteRune-8 64.9µs ± 0% 65.0µs ± 0% +0.16% (p=0.000 n=10+10)
BufferNotEmptyWriteRead-8 469µs ± 0% 461µs ± 0% -1.76% (p=0.000 n=9+10)
BufferFullSmallReads-8 108µs ± 0% 108µs ± 0% -0.21% (p=0.000 n=10+10)
name old speed new speed delta
ReadString-8 3.56GB/s ± 1% 3.55GB/s ± 1% ~ (p=0.165 n=10+10)
WriteByte-8 146MB/s ± 0% 156MB/s ± 0% +7.26% (p=0.000 n=9+10)
WriteRune-8 189MB/s ± 0% 189MB/s ± 0% -0.16% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
ReadString-8 32.8kB ± 0% 32.8kB ± 0% ~ (all equal)
WriteByte-8 0.00B 0.00B ~ (all equal)
WriteRune-8 0.00B 0.00B ~ (all equal)
BufferNotEmptyWriteRead-8 4.72kB ± 0% 4.67kB ± 0% -1.02% (p=0.000 n=10+10)
BufferFullSmallReads-8 3.44kB ± 0% 3.33kB ± 0% -3.26% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
ReadString-8 1.00 ± 0% 1.00 ± 0% ~ (all equal)
WriteByte-8 0.00 0.00 ~ (all equal)
WriteRune-8 0.00 0.00 ~ (all equal)
BufferNotEmptyWriteRead-8 3.00 ± 0% 3.00 ± 0% ~ (all equal)
BufferFullSmallReads-8 3.00 ± 0% 2.00 ± 0% -33.33% (p=0.000 n=10+10)
The most notable thing in go1 benchmarks is reduced allocs in HTTPClientServer (-1 alloc):
HTTPClientServer-8 64.0 ± 0% 63.0 ± 0% -1.56% (p=0.000 n=10+10)
For more explanations and benchmarks see the referenced issue.
Updates #7921
Change-Id: Ica0bf85e1b70fb4f5dc4f6a61045e2cf4ef72aa3
Reviewed-on: https://go-review.googlesource.com/133715
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The existing implementation causes a compiler panic if a function parameter shadows a built-in function, and then calling that shadowed name.
Fixes#27356
Change-Id: I1ffb6dc01e63c7f499e5f6f75f77ce2318f35bcd
Reviewed-on: https://go-review.googlesource.com/132876
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
First, move the strings.Count logic out of emit, since only itemText
requires that. Use it in those call sites. itemLeftDelim and
itemRightDelim cannot contain newlines, as they're the "{{" and "}}"
tokens.
Secondly, introduce a startLine lexer field so that we don't have to
keep track of it elsewhere. That's also a requirement to move the
strings.Count out of emit, as emit modifies the start position field.
Change-Id: I69175f403487607a8e5b561b3f1916ee9dc3c0c6
Reviewed-on: https://go-review.googlesource.com/132275
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The formatting verb '%#x' was used for uint32 values in CL 132956.
This fixes TestFormats.
Change-Id: I3ab6519bde2cb74410fdca14829689cb46bf7022
Reviewed-on: https://go-review.googlesource.com/133595
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
https://go-review.googlesource.com/c/go/+/132355 addressed
a crash and inadvertently fixed#27346; however the comment
added to the type-checker was incorrect and misleading.
This CL fixes the comment, and adds a test case for #27346.
Fixes#27346.
Updates #22467.
Change-Id: Ib6d5caedf302fd42929c4dacc55e973c1aebfe85
Reviewed-on: https://go-review.googlesource.com/133415
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Signalling NaNs were being converted to quiet NaNs during constant
propagation through integer <-> float store-to-load forwarding.
This occurs because we store float32 constants as float64
values and CPU hardware 'quietens' NaNs during conversion between
the two.
Eventually we want to move to using float32 values to store float32
constants, however this will be a big change since both the compiler
and the assembler expect float64 values. So for now this is a small
change that will fix the immediate issue.
Fixes#27193.
Change-Id: Iac54bd8c13abe26f9396712bc71f9b396f842724
Reviewed-on: https://go-review.googlesource.com/132956
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The ppc64x builders are failing on the new splice test from CL 113997
but the actual failure is being obscured by a test deadlock.
Change-Id: I7747f88bcdba9776a3c0d2f5066cfec572706108
Reviewed-on: https://go-review.googlesource.com/133417
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
The android builders are failing on the AF_UNIX part of the new splice
test from CL 113997. Skip them.
Change-Id: Ia0519aae922acb11d2845aa687633935bcd4b1b0
Reviewed-on: https://go-review.googlesource.com/133515
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For OINDEX and other Left+Right nodes, we want the whole
node to be considered as "may affect memory" if either
of Left or Right affect memory. Initial implementation
only considered node as such if both Left and Right were non-safe.
Change-Id: Icfb965a0b4c24d8f83f3722216db068dad2eba95
Reviewed-on: https://go-review.googlesource.com/133275
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
For some reason on darwin the linker still can't add debug sections to
plugins. Executables importing "plugin" do have them, however.
Because of issue 25841, plugins on darwin would likely have bad debug
info anyway so, for now, this isn't a great loss.
This disables the check for debug sections in plugins for darwin only.
Updates #27502
Change-Id: Ib8f62dac1e485006b0c2b3ba04f86d733db5ee9a
Reviewed-on: https://go-review.googlesource.com/133435
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
File is compiled with "-l" flag, so go:noinline is redundant.
Change-Id: Ia269f3b9de9466857fc578ba5164613393e82369
Reviewed-on: https://go-review.googlesource.com/133295
Reviewed-by: Cherry Zhang <cherryyz@google.com>
On linux/ppc64{,le} the SYS_SYNC_FILE_RANGE2 syscall is used to
implement SyncFileRange. This syscall has a different argument order
than SYS_SYNC_FILE_RANGE. Apart from that the implementations of both
syscalls are the same, so use a simple wrapper to invoke the syscall
with the correct argument order.
For context see:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=edd5cd4a9424f22b0fa08bef5e299d41befd5622
Updates #27485
Change-Id: Ib94fb98376bf6c879df6f1b68c3bdd11ebcb5a44
Reviewed-on: https://go-review.googlesource.com/133195
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
LDADDALD(64-bit) and LDADDALW(32-bit) are already supported.
This CL adds supports of LDADDALH(16-bit) and LDADDALB(8-bit).
Change-Id: I4eac61adcec226d618dfce88618a2b98f5f1afe7
Reviewed-on: https://go-review.googlesource.com/132135
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Makes the error message more consistent between OAS and OAS2.
Fixes#26616.
Change-Id: I07ab46c5ef8a37efb2cb557632697f5d1bf789f7
Reviewed-on: https://go-review.googlesource.com/131280
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Splits part of dwarfgeneratedebugsyms into a new function,
dwarfGenerateDebugInfo which is called between deadcode elimination
and type name mangling.
This function takes care of collecting and processing the DIEs for
all functions and package-level variables and also generates DIEs
for all types used in the program.
Fixes#23733
Change-Id: I75ef0608fbed2dffc3be7a477f1b03e7e740ec61
Reviewed-on: https://go-review.googlesource.com/111237
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Removes unnecessary nil-check when referencing offset from an
address. Suggested by Keith Randall in golang/go#27180.
Updates golang/go#27180
Change-Id: I326ed7fda7cfa98b7e4354c811900707fee26021
Reviewed-on: https://go-review.googlesource.com/131735
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The same catch block is there in wasm_exec.js for node processes.
Added it in browser invocations too, to prevent uncaught exceptions.
Change-Id: Icab577ec585fa86df3c76db508b49401bcdb52ae
Reviewed-on: https://go-review.googlesource.com/132916
Reviewed-by: Richard Musiol <neelance@gmail.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The indirectType function comment uses the phrase 'layed out'. In the
context of that phrase, where something is being placed or sprawled,
the word should be 'laid'. 'Layed' is a misspelling of 'laid'.
Change-Id: I05ecb97637276e2252c47e92a0bd678130714889
GitHub-Last-Rev: 6ee67371b4
GitHub-Pull-Request: golang/go#27444
Reviewed-on: https://go-review.googlesource.com/132779
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Make OAS2 and OAS2FUNC sink locations point to the assignment position,
not the nth LHS position.
Fixes#26987
Change-Id: Ibeb9df2da754da8b6638fe1e49e813f37515c13c
Reviewed-on: https://go-review.googlesource.com/129315
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL implements the math/bits.OnesCount{8,16,32,64} functions
as intrinsics on s390x using the 'population count' (popcnt)
instruction. This instruction was released as the 'population-count'
facility which uses the same facility bit (45) as the
'distinct-operands' facility which is a pre-requisite for Go on
s390x. We can therefore use it without a feature check.
The s390x popcnt instruction treats a 64 bit register as a vector
of 8 bytes, summing the number of ones in each byte individually.
It then writes the results to the corresponding bytes in the
output register. Therefore to implement OnesCount{16,32,64} we
need to sum the individual byte counts using some extra
instructions. To do this efficiently I've added some additional
pseudo operations to the s390x SSA backend.
Unlike other architectures the new instruction sequence is faster
for OnesCount8, so that is implemented using the intrinsic.
name old time/op new time/op delta
OnesCount 3.21ns ± 1% 1.35ns ± 0% -58.00% (p=0.000 n=20+20)
OnesCount8 0.91ns ± 1% 0.81ns ± 0% -11.43% (p=0.000 n=20+20)
OnesCount16 1.51ns ± 3% 1.21ns ± 0% -19.71% (p=0.000 n=20+17)
OnesCount32 1.91ns ± 0% 1.12ns ± 1% -41.60% (p=0.000 n=19+20)
OnesCount64 3.18ns ± 4% 1.35ns ± 0% -57.52% (p=0.000 n=20+20)
Change-Id: Id54f0bd28b6db9a887ad12c0d72fcc168ef9c4e0
Reviewed-on: https://go-review.googlesource.com/114675
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Teach escape analysis to recognize these assignment patterns
as not causing the src to leak:
val.x = val.y
val.x[i] = val.y[j]
val.x1.x2 = val.x1.y2
... etc
Helps to avoid "leaking param" with assignments showed above.
The implementation is based on somewhat similiar xs=xs[a:b]
special case that is ignored by the escape analysis.
We may figure out more generalized version of this,
but this one looks like a safe step into that direction.
Updates #14858
Change-Id: I6fe5bfedec9c03bdc1d7624883324a523bd11fde
Reviewed-on: https://go-review.googlesource.com/126395
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This is still not fixed, the testcase reflects that there are still
a few boundchecks. Let's fix the good alternative with an explicit
test though.
Updates #24876
Change-Id: I4da35eb353e19052bd7b69ea6190a69ced8b9b3d
Reviewed-on: https://go-review.googlesource.com/107355
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The codegen testsuite uses regexp to parse the syntax, but it doesn't
have a way to tell line comments containing checks from line comments
containing English sentences. This means that any syntax error (that
is, non-matching regexp) is currently ignored and not reported.
There were some tests in memcombine.go that had an extraneous space
and were thus effectively disabled. It would be great if we could
report it as a syntax error, but for now we just punt and swallow the
spaces as a workaround, to avoid the same mistake again.
Fixes#25452
Change-Id: Ic7747a2278bc00adffd0c199ce40937acbbc9cf0
Reviewed-on: https://go-review.googlesource.com/113835
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The words 'the returned' were changed to 'a returned' in
8201b92aae when referring to the value
returned by SystemCertPool. Brad Fitz pointed out after that commit was
merged that it makes the wording of this function doc inconsistent with
rest of the stdlib since 'a returned' is not used anywhere, but 'the
returned' is frequently used.
Fixes#27385
Change-Id: I289b533a5a0b5c63eaf0abb6dec0085388ecf76b
GitHub-Last-Rev: 6c83b80257
GitHub-Pull-Request: golang/go#27438
Reviewed-on: https://go-review.googlesource.com/132776
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In the CPU profile tests for gccgo, check to make sure that the
runtime's sigprof handler itself doesn't appear in the profile. Add a
"skip if gccgo" guard to one testpoint.
Updates #26595
Change-Id: I92a44161d61f17b9305ce09532134edd229745a7
Reviewed-on: https://go-review.googlesource.com/126316
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change adds support for VDSO on ppc64x, making it possible to
avoid a syscall in walltime and nanotime.
BenchmarkClockVDSOAndFallbackPaths/vDSO-192 20000000 66.0 ns/op
BenchmarkClockVDSOAndFallbackPaths/Fallback-192 1000000 1456 ns/op
Change-Id: I3373bd804b6f122961de3ae9d034e6ccf35748e6
Reviewed-on: https://go-review.googlesource.com/131135
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
