The stack barrier code will need a bookkeeping structure to keep track
of the overwritten return PCs. This commit introduces and allocates
this structure, but does not yet use the structure.
We don't want to allocate space for this structure during garbage
collection, so this commit allocates it along with the allocation of
the corresponding stack. However, we can't do a regular allocation in
newstack because mallocgc may itself grow the stack (which would lead
to a recursive allocation). Hence, this commit makes the bookkeeping
structure part of the stack allocation itself by stealing the
necessary space from the top of the stack allocation. Since the size
of this bookkeeping structure is logarithmic in the size of the stack,
this has minimal impact on stack behavior.
Change-Id: Ia14408be06aafa9ca4867f4e70bddb3fe0e96665
Reviewed-on: https://go-review.googlesource.com/10313
Reviewed-by: Russ Cox <rsc@golang.org>
Currently the runtime assumes that the allocation for the stack is
exactly [stack.lo, stack.hi). We're about to steal a small part of
this allocation for per-stack GC metadata. To prepare for this, this
commit adds a field to the G for the allocated size of the stack.
With this change, stack.lo and stack.hi continue to act as the true
bounds on the stack, but are no longer also used as the bounds on the
stack allocation.
(I also tried this the other way around, where stack.lo and stack.hi
remained the allocation bounds and I introduced a new top of stack.
However, there are far more places that assume stack.hi is the true
top of the stack than there are places that assume it's the top of the
allocation.)
Change-Id: Ifa9d956753be53d286d09cbc73d47fb34a18c0c6
Reviewed-on: https://go-review.googlesource.com/10312
Reviewed-by: Russ Cox <rsc@golang.org>
Currently signalstack takes a lower limit and a length and all calls
hard-code the passed length. Change the API to take a *stack and
compute the lower limit and length from the passed stack.
This will make it easier for the runtime to steal some space from the
top of the stack since it eliminates the hard-coded stack sizes.
Change-Id: I7d2a9f45894b221f4e521628c2165530bbc57d53
Reviewed-on: https://go-review.googlesource.com/10311
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Currently we truncate gctrace clock and CPU times to millisecond
precision. As a result, many phases are typically printed as 0, which
is fine for user consumption, but makes gathering statistics and
reports over GC traces difficult.
In 1.4, the gctrace line printed times in microseconds. This was
better for statistics, but not as easy for users to read or interpret,
and it generally made the trace lines longer.
This change strikes a balance between these extremes by printing
milliseconds, but including the decimal part to two significant
figures down to microsecond precision. This remains easy to read and
interpret, but includes more precision when it's useful.
For example, where the code currently prints,
gc #29 @1.629s 0%: 0+2+0+12+0 ms clock, 0+2+0+0/12/0+0 ms cpu, 4->4->2 MB, 4 MB goal, 1 P
this prints,
gc #29 @1.629s 0%: 0.005+2.1+0+12+0.29 ms clock, 0.005+2.1+0+0/12/0+0.29 ms cpu, 4->4->2 MB, 4 MB goal, 1 P
Fixes#10970.
Change-Id: I249624779433927cd8b0947b986df9060c289075
Reviewed-on: https://go-review.googlesource.com/10554
Reviewed-by: Russ Cox <rsc@golang.org>
The Error function is a potential XSS vector if a user can control the
error message.
For example, an http.FileServer when given a request for this path
/<script>alert("xss!")</script>
may return a response with a body like this
open <script>alert("xss!")</script>: no such file or directory
Browsers that sniff the content may interpret this as HTML and execute
the script. The nosniff header added by this CL should help, but we
should also try santizing the output entirely.
Change-Id: I447f701531329a2fc8ffee2df2f8fa69d546f893
Reviewed-on: https://go-review.googlesource.com/10640
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Allow room for the initial minus sign of negative integers when
computing widths.
Fixes#10945.
Change-Id: I04d80203aaff64611992725d613ec13ed2ae721f
Reviewed-on: https://go-review.googlesource.com/10393
Reviewed-by: Rob Pike <r@golang.org>
This change fixes incorrect parsing of literal IP addresses in local
database when the addresses contain IPv6 zone identifiers, are in
dotted-decimal notation or in colon-hexadecimal notation with leading
zeros.
https://golang.org/cl/5851 already fixed the code path using getaddrinfo
via cgo. This change fixes the remaining non-cgo code path.
Fixes#8243.
Fixes#8996.
Change-Id: I48443611cbabed0d69667cc73911ba3de396fd44
Reviewed-on: https://go-review.googlesource.com/10306
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes an error where the compiler did not spot that the shadowed err
value was set again after being read. That second assignment was lost
as the value was redeclared in an inner scope.
Spotted by Gordon Klass, https://groups.google.com/forum/#!topic/golang-nuts/MdDLbvOjb4o
Change-Id: I28f2da6f98c52afcbb45e17d2b4f36c586598f98
Reviewed-on: https://go-review.googlesource.com/10600
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
The names of examples were wrong so they were not shown in
the documentation.
Change-Id: Ib1b985b44d2e056c38c008a591cb441e422c4717
Reviewed-on: https://go-review.googlesource.com/10404
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Executing a template involving variadic functions featuring
a []interface{} slice (such as printf) could result in a
panic in reflect.Value.Call, due to incorrect type checking.
The following expressions failed (with a panic):
{{true|printf}}
{{1|printf}}
{{1.1|printf}}
{{'x'|printf}}
{{1+2i|printf}}
Implemented proper type checks for the fixed parameters of the
variadic functions.
Fixes#10946
Change-Id: Ia75333f651f73b3d2e024cb0c47cc30d90cb6852
Reviewed-on: https://go-review.googlesource.com/10403
Reviewed-by: Rob Pike <r@golang.org>
The current escape code panics when an action involves chain nodes.
Such nodes can be seen in the following situation:
{{ . | AAA.B }} - AAA being a registered function
The above expression is actually valid, because AAA could return a
map containing a B key. The tests in text/template explicitly
demonstrate this case.
Fix allIdents to cover also chain nodes.
While I was investigating this issue, I realized that the tests
introduced in similar CL 9621 were incorrect. Parse errors were
caught as expected, but for the wrong reason. Fixed them as well.
No changes in text/template code itself.
Fixes#10801
Change-Id: Ic9fe43b63669298ca52c3f499e2725dd2bb818a8
Reviewed-on: https://go-review.googlesource.com/10340
Reviewed-by: Rob Pike <r@golang.org>
In 1.6, go doc is more likely to be available.
Change-Id: I970ad1d3317b35273f5c8d830f75713d3570c473
Reviewed-on: https://go-review.googlesource.com/10518
Reviewed-by: Andrew Gerrand <adg@golang.org>
When go doc is invoked with a single package name argument (e.g. go doc pkgname)
it needs to find the directory of the requested package sources in GOPATH.
GOPATH might contain directories with the same name as the requested package
that do no contain any *.go files. This change makes "go doc" ignore such
directories when looking for possible package directories.
This fixes#10882
Change-Id: Ib3d4ea69a25801c34cbe7b044de9870ba12f9aa8
Reviewed-on: https://go-review.googlesource.com/10190
Reviewed-by: Rob Pike <r@golang.org>
t.init() should be called at the time of template creation
i.e, template.New() and t.New() instead of later in the process.
- Removed calls of t.init() from t.Parse(), t.Execute(), t.Funcs()
- Also got rid of t.common != nil checks as it should never be nil
Fixes#10879
Change-Id: I1b7ac812f02c841ae80037babce7e2b0a2df13e8
Reviewed-on: https://go-review.googlesource.com/10240
Reviewed-by: Rob Pike <r@golang.org>
This was a simple oversight: the algorithm to handle recursive types
needed to be applied to the ignore-item case as well.
Fixes#10415.
Change-Id: I39ef31cad680ab8334e141f60d2f8707896785d1
Reviewed-on: https://go-review.googlesource.com/8942
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
runtime.GC() is intentionally very weakly specified. However, it is so
weakly specified that it's difficult to know that it's being used
correctly for its one intended use case: to ensure garbage collection
has run in a test that is garbage-sensitive. In particular, it is
unclear whether it is synchronous or asynchronous. In the old STW
collector this was essentially self-evident; short of queuing up a
garbage collection to run later, it had to be synchronous. However,
with the concurrent collector, there's evidence that people are
inferring that it may be asynchronous (e.g., issue #10986), as this is
both unclear in the documentation and possible in the implementation.
In fact, runtime.GC() runs a fully synchronous STW collection. We
probably don't want to commit to this exact behavior. But we can
commit to the essential property that tests rely on: that runtime.GC()
does not return until the GC has finished.
Change-Id: Ifc3045a505e1898ecdbe32c1f7e80e2e9ffacb5b
Reviewed-on: https://go-review.googlesource.com/10488
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
As noted in bug #10980, an empty PEM block is encoded as
-----BEGIN foo-----
-----END foo-----
However, Decode failed to process this.
RFC 1421 doesn't answer what the encoding of the empty block should be
because PEM messages always contain at least one header. However, PEM
these days is just the encoding format – nobody uses the rest of PEM any
longer.
Having the empty block not contain a newline seems most correct because
https://tools.ietf.org/html/rfc1421#section-9 clearly says that the
optional “pemtext” carries the leading new-line with it. So if omitted,
the new-line should be omitted too.
None the less, this changes makes encoding/pem permissive, accepting any
number of blank lines in an empty PEM block.
Fixes#10980
Change-Id: If36bdfbf991ee281eccd50b56ddc95f24c6debb2
Reviewed-on: https://go-review.googlesource.com/10516
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
I think it's worth mentioning.
But the final decision is up to you.
Change-Id: I3959132600ecc554988524ede73a7f6e8eac8353
Reviewed-on: https://go-review.googlesource.com/10551
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
They're each architecture-specific.
Let them share.
Reduces Prog size to 288, which is the
next smaller malloc class.
Reduces inuse_space while compiling the
rotate tests by ~3.2%.
Change-Id: Ica8ec90e466c97b569745fffff0e5acd364e55fa
Reviewed-on: https://go-review.googlesource.com/10514
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
That which cannot happen has not happened.
No immediate changes to Addr or Prog size.
Change-Id: I4cb9315f2c9f5f92eda340bfc4abb46395fa467f
Reviewed-on: https://go-review.googlesource.com/10513
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Printed and Width were unused.
Despite only removing two bytes, due to alignment, 8 bytes are saved
on 64-bit:
Before: unsafe.Sizeof(obj.Prog{}) == 304
After: unsafe.Sizeof(obj.Prog{}) == 296
The next size class below 320 (304=>19(320)) is 288. Still 8 bytes
away from that.
Change-Id: I8d1632dd40d387f7036c03c65ea4d64e9b6218c3
Reviewed-on: https://go-review.googlesource.com/10511
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
- (*Float).Scan conflicted with fmt.Scanner.Scan; it was also only used
internally. Removed it, as well as the companion ScanFloat function.
- (*Float).Parse (and thus ParseFloat) can now also parse infinities.
As a result, more code could be simplified.
- Fixed a bug in rounding (round may implicitly be called for infinite
values). Found via existing test cases, after simplifying some code.
- Added more test cases.
Fixes issue #10938.
Change-Id: I1df97821654f034965ba8b82b272e52e6dc427f1
Reviewed-on: https://go-review.googlesource.com/10498
Reviewed-by: Alan Donovan <adonovan@google.com>
This paves the way for a fmt-compatible (*Float).Format method.
A better name then Text is still desirable (suggestions welcome).
This is partly fixing issue #10938.
Change-Id: I59c20a8cee11f5dba059fe0f38b414fe75f2ab13
Reviewed-on: https://go-review.googlesource.com/10493
Reviewed-by: Alan Donovan <adonovan@google.com>
It is almost never set and Addr is large, so having the full struct
in the Prog wastes memory most of the time.
Before (on a 64-bit system):
$ sizeof -p cmd/internal/obj Addr Prog
Addr 80
Prog 376
$
After:
$ sizeof -p cmd/internal/obj Addr Prog
Addr 80
Prog 304
$
Change-Id: I491f201241f87543964a7d0f48b85830759be9d0
Reviewed-on: https://go-review.googlesource.com/10457
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Memory usage has been reduced.
The tests are still slow,
but that is issue #10571.
/usr/bin/time shows significant variation
in the peak memory usage compiling with tip.
This is unsurprising, given GC.
Using Go 1.4.2, memory is stable at 410mb.
Using tip at d2ee09298,
memory ranges from 470mb (+15%) to 534mb (+30%),
with a mean of 504mb (+23%), with n=50.
Fixes#9933.
Change-Id: Id31f3ae086ec324abf70e8f1a8044c4a0c27e274
Reviewed-on: https://go-review.googlesource.com/10211
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Use pkgimport == nil (or not) to distinguish between
parsing .go source files where "p" exponent specifier
is not allowed and parsing .a or .o export data where
it is. Use that to control error when p-exponent is
seen.
Fixes#9036
Change-Id: I8924f09c91d4945ef3f20e80a6e544008a94a7e4
Reviewed-on: https://go-review.googlesource.com/10450
Reviewed-by: Russ Cox <rsc@golang.org>
This is an automated follow-up to CL 10210.
It was generated with a combination of eg and gofmt -r.
No functional changes. Passes toolstash -cmp.
Change-Id: I35f5897948a270b472d8cf80612071b4b29e9a2b
Reviewed-on: https://go-review.googlesource.com/10253
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
TestGoroutineParallelism can deadlock if the GC runs during the
test. Currently it tries to prevent this by forcing a GC before the
test, but this is best effort and fails completely if GOGC is very low
for testing.
This change replaces this best-effort fix with simply setting GOGC to
off for the duration of the test.
Change-Id: I8229310833f241b149ebcd32845870c1cb14e9f8
Reviewed-on: https://go-review.googlesource.com/10454
Reviewed-by: Russ Cox <rsc@golang.org>
Currently when the race detector is enabled, orderexpr always creates
a temporary for slice and append operations. This used to be necessary
because the race detector had a different code path for slice
assignment that required this temporary. Unfortunately, creating this
temporary inhibits the optimization that eliminates write barriers
when a slice is assigned only to change its length or cap. For most
code, this is bad for performance, and in go:nowritebarrier functions
in the runtime, this can mean the difference between compiling and not
compiling.
Now the race detector uses the regular slice assignment code, so
creating this temporary is no longer necessary.
Change-Id: I296042e1edc571b77c407f709c2ff9091c4aa795
Reviewed-on: https://go-review.googlesource.com/10456
Reviewed-by: Russ Cox <rsc@golang.org>
Most runtime tests that invoke the compiler to build a sub-test binary
do so with a special environment constructed by testEnv that strips
out environment variables that should apply to the test but not to the
build.
Fix TestGdbPython to use this test environment when invoking go build,
like other tests do.
Change-Id: Iafdf89d4765c587cbebc427a5d61cb8a7e71b326
Reviewed-on: https://go-review.googlesource.com/10455
Reviewed-by: Russ Cox <rsc@golang.org>
A decimal represented 0.0 with a 0-length mantissa and undefined
exponent, but the formatting code assumes a valid zero exponent
if the float value is 0.0. The code worked because we allocate a
new decimal value each time and because there's no rounding that
lead to 0.0.
Change-Id: Ifd771d7709de83b87fdbf141786286b4c3e13d4f
Reviewed-on: https://go-review.googlesource.com/10448
Reviewed-by: Alan Donovan <adonovan@google.com>
This is dead code that was missed
during the 'go tool compile' migration.
Change-Id: Ice2af8a9ef72f8fd5f82225ee261854d93b659f1
Reviewed-on: https://go-review.googlesource.com/10430
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It shrinks Prog type from 448 bytes down to 376 bytes on amd64.
It also makes sense, because I don't know of any modern architecture
that have instructions which can write to two destinations, none of
which is a register (even x86 doesn't have such instructions).
Change-Id: I3061f1c9ac93d79ee2b92ecb9049641d0e0f6300
Reviewed-on: https://go-review.googlesource.com/10330
Reviewed-by: Aram Hăvărneanu <aram@mgk.ro>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
This speeds up sharded builds notably, by 1 second * the number of
tests.
Change-Id: Ib0295c31e4974f3003f72cb16c48949812b6f22b
Reviewed-on: https://go-review.googlesource.com/10460
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
- factor out handling of sign
- rename bstring, pstring to fmtB, fmtP consistent with fmtE, fmtF
- move all float-to-string conversion functions into ftoa.go
- no functional changes
Change-Id: I5970ecb874dc9c387630b59147d90bda16a5d8e6
Reviewed-on: https://go-review.googlesource.com/10387
Reviewed-by: Alan Donovan <adonovan@google.com>
