It is generally expected that the ELF flags of a dynamically linked executable
and the libraries it links against match. Go's linker currently always produces
executables with flags that do not declare a float abi (hard, soft) at all, but
when cgo is involved it is unlikely that this matches the system libraries
being linked against -- really the decision about ABI is made by the C compiler
during the invocation of cgo.
This change is basically a port of the code from binutils that parses the
".ARM.attributes" section to check for the tag that declares that the code is
built for the hard-float ABI.
Fixes#7094
Change-Id: I737c8f3b5ed4af545cfc3e86722d03eb83083402
Reviewed-on: https://go-review.googlesource.com/14860
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Change-Id: Id6cb5e3d40e8a2ded6359aa7fcdc012861cc3994
Reviewed-on: https://go-review.googlesource.com/14545
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Motivation:
* There are an increasing number of "one-off" corrupt files added
to make sure that package does not succeed or crash on them.
Instead, allow for the test to specify the error that is expected
to occur (if any).
* Also, fold in the logic to check the MD5 checksum into this
function.
The following tests are being removed:
* TestIncrementalRead: Done by TestReader by using io.CopyBuffer
with a buffer of 8. This achieves the same behavior as this test.
* TestSparseEndToEnd: Since TestReader checks the MD5 checksums
if the input corpus provides them, then this is redundant.
* TestSparseIncrementalRead: Redundant for the same reasons that
TestIncrementalRead is now redundant
* TestNegativeHdrSize: Added to TestReader corpus
* TestIssue10968: Added to TestReader corpus
* TestIssue11169: Added to TestReader corpus
With this change, code coverage did not change: 85.3%
Change-Id: I8550d48657d4dbb8f47dfc3dc280758ef73b47ec
Reviewed-on: https://go-review.googlesource.com/15176
Reviewed-by: Andrew Gerrand <adg@golang.org>
This lets us re-enable duffzero.
Fixes#12108
Change-Id: Iefd24d26eaa56067caa2c29ff99cd20a42d8714a
Reviewed-on: https://go-review.googlesource.com/14937
Reviewed-by: Keith Randall <khr@golang.org>
Let C be whether c valid
Let E be whether err is non-nil
The old comment explicitly says that (~C → E). However, that does call
into question whether (E → ~C), which causes doubts for users.
Without a comment at all, it is obvious that only (E ↔ ~C) makes sense.
Fixes#11308
Change-Id: I5a7d51ceb509057eccca91f57a7e48c9d1c6d112
Reviewed-on: https://go-review.googlesource.com/15256
Reviewed-by: Andrew Gerrand <adg@golang.org>
The later part of the docstring simply talks about "offset" but does
not disambiguate what it is relative to. For both the return value
and valid offsets to seek to, it only makes sense in the context of
"offset relative to origin of file".
Fixes#11877
Change-Id: Ic238a407cf8e8fdd64991d98a6584cdc8a51cd6b
Reviewed-on: https://go-review.googlesource.com/15257
Reviewed-by: Andrew Gerrand <adg@golang.org>
Usage of all commands is printed to stderr, except go test, which is printed to
stdout. This is inconsistent.
Print `go test -help` to stderr instead.
R=rsc@golang.org
Change-Id: I079f4788134bf9aedcccc26838879eedad1c925e
Reviewed-on: https://go-review.googlesource.com/15434
Reviewed-by: Andrew Gerrand <adg@golang.org>
The net package already has support for limited uses of the strconv
package. Despite this, a few uses of strconv have crept in over time.
Remove them and use the existing net support instead.
Change-Id: Icdb4bdaa8e1197f1119a96cddcf548ed4a551b74
Reviewed-on: https://go-review.googlesource.com/15400
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
cgo panics in Package.rewriteRef for:
var a = C.enum_test(1)
or
p := new(C.enum_test)
when the corresponding enum type is not defined.
Check nil values for Type fields and issue a proper
error instead.
Fixes#11097
Updates #12160
Change-Id: I5821d29097ef0a36076ec5273125b09846c7d832
Reviewed-on: https://go-review.googlesource.com/15264
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The existing serve() method returns a zero-length response body when
it encounters an error, which results in a blank page and no visible
error in browsers.
This change sends a response body explaining the error for display in browsers.
Fixes#12745
Change-Id: I9dc3b95ad88cb92c18ced51f6b52bd3b2c1b974c
Reviewed-on: https://go-review.googlesource.com/15018
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The current heap sampling introduces some bias that interferes
with unsampling, producing unexpected heap profiles.
The solution is to use a Poisson process to generate the
sampling points, using the formulas described at
https://en.wikipedia.org/wiki/Poisson_process
This fixes#12620
Change-Id: If2400809ed3c41de504dd6cff06be14e476ff96c
Reviewed-on: https://go-review.googlesource.com/14590
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
ppc64 codegen assumes that it is OK to stomp on r31 at any time, but it is not
excluded from the set of registers that regopt is allowed to use.
Fixes#12597
Change-Id: I29c7655e32abd22f3c21d88427b73e4fca055233
Reviewed-on: https://go-review.googlesource.com/15245
Reviewed-by: Minux Ma <minux@golang.org>
Turns out the summary information for the ... args was
already correctly computed, all that lacked was to make
use of it and correct tests that documented our prior
deficiencies.
Fixes#12006
Change-Id: Ie8adfab7547f179391d470679598f0904aabf9f7
Reviewed-on: https://go-review.googlesource.com/15200
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
The runtime/zgoos_$GOOS.go and runtime/zgoarch_$GOARCH.go files
are in the repository now, so the message is actually incorrect
(running make.bash won't generate those). The reason is probably
wrong $GOROOT.
Change-Id: I8dc125594c52d666eca91fd5af48b60d12d599b8
Reviewed-on: https://go-review.googlesource.com/15221
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CGOPKGPATH variable was undocumented, but it is not needed anymore.
It was used before the existence of the go tool to tell cgo the full
path of the package that it was building, which in turn set the name
of the shared library that cgo expected to load back when cgo used
shared libraries. CGOPKGPATH no longer does anything useful;
it just affects the comments in the generated header file.
Remove it to avoid any future confusion.
Fixes#11852
Change-Id: Ieb452e5bbcfd05b87a4a3618b5b8f44423341858
Reviewed-on: https://go-review.googlesource.com/15266
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Commit acc90c5 passed the trybots, lingered for weeks, and in the
meantime the type of this variable changed to a bool. I didn't rebase
and re-run the trybots before submitting.
Fixes#12832
Change-Id: If24fda227edd8207f8069c67f1c45f08e6ac215a
Reviewed-on: https://go-review.googlesource.com/15286
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Internal error arose from calling methodfunc on a invalid interface
field during the implements check. int obviously isn't a function,
and errors on getinarg...
for im := iface.Type; im != nil; im = im.Down {
imtype = methodfunc(im.Type, nil)
// ...
}
Fix handles the internal compiler error, but does not throw an
additional error, i.e. the following code will error on the I
interface, but type A will pass the implements check since
'Read(string) string' is implemented and 'int' is skipped
type I interface {
Read(string) string
int
}
type A struct {
}
func (a *A) Read(s string) string {
return s
}
func New() I {
return new(A)
}
Fixes#10975
Change-Id: I4b54013afb2814db3f315515f0c742d8631ca500
Reviewed-on: https://go-review.googlesource.com/13747
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently, amd64p32's memmove and memclr use 8 byte writes as much as
possible and 1 byte writes for the tail of the object. However, if an
object ends with a 4 byte pointer at an 8 byte aligned offset, this
may copy/zero the pointer field one byte at a time, allowing the
garbage collector to observe a partially copied pointer.
Fix this by using 4 byte writes instead of 8 byte writes.
Updates #12552.
Change-Id: I13324fd05756fb25ae57e812e836f0a975b5595c
Reviewed-on: https://go-review.googlesource.com/15370
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This fixes an issue where the runtime panics with "out of memory" or
"cannot allocate memory" even though there's ample memory by reducing
the number of memory mappings created by the memory allocator.
Commit 7e1b61c worked around issue #8832 where Linux's transparent
huge page support could dramatically increase the RSS of a Go process
by setting the MADV_NOHUGEPAGE flag on any regions of pages released
to the OS with MADV_DONTNEED. This had the side effect of also
increasing the number of VMAs (memory mappings) in a Go address space
because a separate VMA is needed for every region of the virtual
address space with different flags. Unfortunately, by default, Linux
limits the number of VMAs in an address space to 65530, and a large
heap can quickly reach this limit when the runtime starts scavenging
memory.
This commit dramatically reduces the number of VMAs. It does this
primarily by only adjusting the huge page flag at huge page
granularity. With this change, on amd64, even a pessimal heap that
alternates between MADV_NOHUGEPAGE and MADV_HUGEPAGE must reach 128GB
to reach the VMA limit. Because of this rounding to huge page
granularity, this change is also careful to leave large used and
unused regions huge page-enabled.
This change reduces the maximum number of VMAs during the runtime
benchmarks with GODEBUG=scavenge=1 from 692 to 49.
Fixes#12233.
Change-Id: Ic397776d042f20d53783a1cacf122e2e2db00584
Reviewed-on: https://go-review.googlesource.com/15191
Reviewed-by: Keith Randall <khr@golang.org>
In general, finishsweep_m must block until any spans that are
concurrently being swept have been swept. It accomplishes this by
looping over all spans, which, as in the previous commit, takes
~1ms/heap GB. Unfortunately, we do this during the STW sweep
termination phase, so multi-gigabyte heaps can push our STW time past
10ms.
However, there's no need to do this wait if the world is stopped
because, in effect, stopping the world already had to wait for
anything that was sweeping (and if it didn't, the wait in
finishsweep_m would deadlock). Hence, we can simply skip this loop if
the world is stopped, such as during sweep termination. In fact,
currently all calls to finishsweep_m are STW, but this hasn't always
been the case and may not be the case in the future, so we keep the
logic around.
For 24GB heaps, this reduces max pause time by 75% relative to tip and
by 90% relative to Go 1.5. Notably, all pauses are now well under
10ms. Here are the results for the garbage benchmark:
------------- max pause ------------
Heap Procs after change before change 1.5.1
24GB 12 3.8ms 16ms 37ms
24GB 4 3.7ms 16ms 37ms
4GB 4 3.7ms 3ms 6.9ms
In the 4GB/4P case, it seems the "before change" run got lucky: the
max went up, but the 99%ile pause time went down from 3ms to 2.04ms.
Change-Id: Ica22189559f231d408ef2815019c9dbb5f38bf31
Reviewed-on: https://go-review.googlesource.com/15071
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In order to compute the sweep ratio, the runtime needs to know how
many pages belong to spans in state _MSpanInUse. Currently it finds
this out by looping over all spans during mark termination. However,
this takes ~1ms/heap GB, so multi-gigabyte heaps can quickly push our
STW time past 10ms.
Replace the loop with an actively maintained count of in-use pages.
For multi-gigabyte heaps, this reduces max mark termination pause time
by 75%–90% relative to tip and by 85%–95% relative to Go 1.5.1. This
shifts the longest pause time for large heaps to the sweep termination
phase, so it only slightly decreases max pause time, though it roughly
halves mean pause time. Here are the results for the garbage
benchmark:
---- max mark termination pause ----
Heap Procs after change before change 1.5.1
24GB 12 1.9ms 18ms 37ms
24GB 4 3.7ms 18ms 37ms
4GB 4 920µs 3.8ms 6.9ms
Fixes#11484.
Change-Id: Ia2d28bb8a1e4f1c3b8ebf79fb203f12b9bf114ac
Reviewed-on: https://go-review.googlesource.com/15070
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reduces pause time by ~25% relative to tip and by ~50% relative
to Go 1.5.1.
Currently one of the steps of STW mark termination is to loop (in
parallel) over all spans to find objects with finalizers in order to
mark all objects reachable from these objects and to treat the
finalizer special as a root. Unfortunately, even if there are no
finalizers at all, this loop takes roughly 1 ms/heap GB/core, so
multi-gigabyte heaps can quickly push our STW time past 10ms.
Fix this by moving this scan from mark termination to concurrent scan,
where it can run in parallel with mutators. The loop itself could also
be optimized, but this cost is small compared to concurrent marking.
Making this scan concurrent introduces two complications:
1) The scan currently walks the specials list of each span without
locking it, which is safe only with the world stopped. We fix this by
speculatively checking if a span has any specials (the vast majority
won't) and then locking the specials list only if there are specials
to check.
2) An object can have a finalizer set after concurrent scan, in which
case it won't have been marked appropriately by concurrent scan. If
the finalizer is a closure and is only reachable from the special, it
could be swept before it is run. Likewise, if the object is not marked
yet when the finalizer is set and then becomes unreachable before it
is marked, other objects reachable only from it may be swept before
the finalizer function is run. We fix this issue by making
addfinalizer ensure the same marking invariants as markroot does.
For multi-gigabyte heaps, this reduces max pause time by 20%–30%
relative to tip (depending on GOMAXPROCS) and by ~50% relative to Go
1.5.1 (where this loop was neither concurrent nor parallel). Here are
the results for the garbage benchmark:
---------------- max pause ----------------
Heap Procs Concurrent scan STW parallel scan 1.5.1
24GB 12 18ms 23ms 37ms
24GB 4 18ms 25ms 37ms
4GB 4 3.8ms 4.9ms 6.9ms
In all cases, 95%ile pause time is similar to the max pause time. This
also improves mean STW time by 10%–30%.
Fixes#11485.
Change-Id: I9359d8c3d120a51d23d924b52bf853a1299b1dfd
Reviewed-on: https://go-review.googlesource.com/14982
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, the GC modes constants are untyped and functions pass them
around as ints. Clean this up by introducing a proper type for these
constant.
Change-Id: Ibc022447bdfa203644921fbb548312d7e2272e8d
Reviewed-on: https://go-review.googlesource.com/14981
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Removed direct link to issue tracker in the README - it makes it too
easy to use it for a question - and it's abused multiple times a day
for questions. It's easy enough to find it if there's a real issue
to report.
Added sentence to point people at golang-nuts and the new forum.
Change-Id: If75bab888cda064aceeefc49ef672fbb964f8f54
Reviewed-on: https://go-review.googlesource.com/15284
Reviewed-by: Jason Buberel <jbuberel@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes a case where the Stmt.Close() function in database/sql discards any error generated by the Close() function of the contained driverStmt.
Fixes#12798
Change-Id: I40384d6165856665b062d15a643e4ecc09d63fda
Reviewed-on: https://go-review.googlesource.com/15178
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change splits signal_unix.go into signal_unix.go and
signal2_unix.go and removes the fake symbol sigfwd from signal
forwarding unsupported platforms for clarification purpose.
Change-Id: I205eab5cf1930fda8a68659b35cfa9f3a0e67ca6
Reviewed-on: https://go-review.googlesource.com/12062
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If the stream is in an inconsistent state, it does not make sense
that Reader.Read can be called and possibly succeed.
Change-Id: I9d1c5a1300b2c2b45232188aa7999e350809dcf2
Reviewed-on: https://go-review.googlesource.com/15177
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
The native Go host resolver was behaving differently than libc
and the entries in the /etc/hosts were handled in a case sensitive
way. In order to be compatible with libc's resolver, /etc/hosts
lookups must be case-insensitive.
Fixes#12806.
Change-Id: I3c14001abffadf7458fd1a027c91e6438a87f285
Reviewed-on: https://go-review.googlesource.com/15321
Run-TryBot: Burcu Dogan <jbd@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The existing test did not take into account the implicit
dereference of &fixedArray and thus heap-escaped when it
was not necessary.
Also added a detailed test for this and related cases.
Fixes#12588
Change-Id: I951e9684a093082ccdca47710f69f4366bd6b3cf
Reviewed-on: https://go-review.googlesource.com/15130
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reduce allocation to avoid running out of memory on the openbsd/arm builder,
until issue/12032 is resolved.
Update issue #12032
Change-Id: Ibd513829ffdbd0db6cd86a0a5409934336131156
Reviewed-on: https://go-review.googlesource.com/15242
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
sysReserve will return nil on failure - correctly handle this case and return
nil to the caller. Currently, a failure will result in h.arena_end being set
to psize, h.arena_used being set to zero and fun times ensue.
On the openbsd/arm builder this has resulted in:
runtime: address space conflict: map(0x0) = 0x40946000
fatal error: runtime: address space conflict
When it should be reporting out of memory instead.
Change-Id: Iba828d5ee48ee1946de75eba409e0cfb04f089d4
Reviewed-on: https://go-review.googlesource.com/15056
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This is a follow-up to a326c3e to avoid reflect being in the API.
Fixes#12801.
Change-Id: Ic4c2e592e2c35b5911f75d88f1d9c44787c80f30
Reviewed-on: https://go-review.googlesource.com/15240
Run-TryBot: David Symonds <dsymonds@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
The sparseFileReader is prone to two different forms of
denial-of-service attacks:
* A malicious tar file can cause an infinite loop
* A malicious tar file can cause arbitrary panics
This results because of poor error checking/handling, which this
CL fixes. While we are at it, add a plethora of unit tests to
test for possible malicious inputs.
Change-Id: I2f9446539d189f3c1738a1608b0ad4859c1be929
Reviewed-on: https://go-review.googlesource.com/15115
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Andrew Gerrand <adg@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reader failed to detect truncated streams since calls to
io.ReadFull did not check if the error is io.EOF.
Change-Id: I86c497519daaaccefc6eb5617ddcd8fd3b99f51b
Reviewed-on: https://go-review.googlesource.com/14835
Reviewed-by: Nigel Tao <nigeltao@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The memory sanitizer (msan) is a nice compiler feature that can
dynamically check for memory errors in C code. It's not useful for Go
code, since Go is memory safe. But it is useful to be able to use the
memory sanitizer on C code that is linked into a Go program via cgo.
Without this change it does not work, as msan considers memory passed
from Go to C as uninitialized.
To make this work, change the runtime to call the C mmap function when
using cgo. When using msan the mmap call will be intercepted and marked
as returning initialized memory.
Work around what appears to be an msan bug by calling malloc before we
call mmap.
Change-Id: I8ab7286d7595ae84782f68a98bef6d3688b946f9
Reviewed-on: https://go-review.googlesource.com/15170
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
