When reading body of inlining function, which has another inlined
function in the body, the reader still add this inlined function to
todoBodies, which it shouldn't because the inlined function was read
already.
To fix this, introduce new flag to signal that we are done construting
all functions in todoBodies, thus the addBody shouldn't add anything
to todoBodies then.
Updates #48094
Change-Id: I45105dd518f0a7b69c6dcbaf23b957623f271203
Reviewed-on: https://go-review.googlesource.com/c/go/+/347529
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For #48066
Change-Id: I1152a1c15756df35b71b27d3e7025d97da9e70b0
Reviewed-on: https://go-review.googlesource.com/c/go/+/348579
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
In case of embedded field, if the receiver was fully instantiated, we
must use its instantiated type, instead of passing the type params of
the base receiver.
Fixes#47797Fixes#48253
Change-Id: I97613e7e669a72605137e82406f7bf5fbb629378
Reviewed-on: https://go-review.googlesource.com/c/go/+/348549
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
This is followup of CL 343972, moving the checkptr alignment
instrumentation during SSA generation instead of walk.
Change-Id: I29b2953e4eb8631277fe2e0f44b9d987dd7a69f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/345430
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
So next CL can re-use the logic to perform checkptr instrumentation.
Change-Id: I3241e9c3c84da04db71fd1d4fd83cb76b2e18521
Reviewed-on: https://go-review.googlesource.com/c/go/+/345435
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The current assembler uses REGTMP as a temporary destination register,
when optimizing one instruction into a multi-instruction sequence. But
in some cases, when the source register is REGTMP, this behavior is
incorrect.
For example:
ADD $0x1234567, R27, R3
The current assembler encodes it into
MOVD $17767, R27
MOVK $(291<<16), R27
ADD R27, R27, R3
It is illegal to overwrite R27. This CL adds the related checks.
Add test cases.
Change-Id: I0af373d9fd23d8f067c093778dd4cc76748faf38
Reviewed-on: https://go-review.googlesource.com/c/go/+/344689
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: fannie zhang <Fannie.Zhang@arm.com>
This is a vestigial artifact of how I initially split apart the public
and private data for objects. But now objects are split into more
parts, and it's proven easier to just keep them as separate variables.
So it's time to cleanup the initial public/private code to follow the
same approach.
Change-Id: I3976b19fb433cbe21d299d3799ec616f9e59561e
Reviewed-on: https://go-review.googlesource.com/c/go/+/348412
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
In indexed export, values are always exported along with their type
and are encoded in a type-sensitive manner, because this matches how
cmd/compile handled constants internally.
However, go/types intentionally differs from this, decoupling type
from value representation. As unified IR strives to be more
go/types-centric, it makes sense to embrace this and make values a
more first-class encoding.
Change-Id: If21d849c4f610358bd776d5665469d180bcd5f6e
Reviewed-on: https://go-review.googlesource.com/c/go/+/348014
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This ensures that diagnostics for files within $GOROOT continue to be
reported using their full filepath, rather than the abbreviated
filepath. Notably, this is necessary for test/run.go, which has tests
that expect to see the full filepath.
Updates #48247.
Change-Id: I440e2c6dd6109ca059d81cee49e476bba805d703
Reviewed-on: https://go-review.googlesource.com/c/go/+/348670
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Port to types2 and adjust compiler accordingly.
Change-Id: I2e72b151ef834977dca64cb2e62cedcac4e46062
Reviewed-on: https://go-review.googlesource.com/c/go/+/348578
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This is a port of CL 348376 with the necessary adjustments
in the compiler.
Change-Id: Ib11ee841b194746ff231ee493aa56bf9b3a4a67f
Reviewed-on: https://go-review.googlesource.com/c/go/+/348577
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
A common bug during development is to introduce rewrite rule cycles.
This is annoying because it takes a while to notice that
make.bash is a bit too slow this time, and to remember why.
And then you have to manually arrange to debug.
Make this all easier by automating it.
Detect cycles, and when we detect one, print the sequence
of rewrite rules that occur within a single cycle before crashing.
Change-Id: I8dadda13990ab925a81940d4833c9e5243368435
Reviewed-on: https://go-review.googlesource.com/c/go/+/347829
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
This is a clean port of CL 348371.
Change-Id: I3a61a5a8928279bc783ef16739f7607de3b6ecf3
Reviewed-on: https://go-review.googlesource.com/c/go/+/348575
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This is a port of CL 347561.
A comment was corrected both in types2 and go/types, and the
compiler adjusted for the updated NewTypeParameter function.
Change-Id: I4381f0dd8e43228e1d037c5d997d421b7838f905
Reviewed-on: https://go-review.googlesource.com/c/go/+/348574
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This is a clean port of CL 347560.
Change-Id: I0d56f5a818df1a66e603415d5198d909b0aef228
Reviewed-on: https://go-review.googlesource.com/c/go/+/348573
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This is a port of CL 344390 with adjustments to names to make it
work for types2.
Change-Id: I05c33d9858f973adfbf48d8a1faaf377280f6985
Reviewed-on: https://go-review.googlesource.com/c/go/+/348572
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
As discussed in #47781, IndexListExpr is one character shorter and has
the advantage of being next to IndexExpr in documentation.
Updates #47781
Change-Id: I709d5c1a79b4f9aebcd6445e4ab0cd6dae45bab7
Reviewed-on: https://go-review.googlesource.com/c/go/+/348609
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Workspace mode only allows -mod to be set to 'readonly'. When returning
the error for other values of -mod, specify the the value in the error
so it's easier to see what's going on when the go command is invoked
through another tool.
For #45713, #48186
Change-Id: I3ba206a71c7a20c18aeccfa48f3c9dc935a180a4
Reviewed-on: https://go-review.googlesource.com/c/go/+/347593
Trust: Michael Matloob <matloob@golang.org>
Trust: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This change changes go.work files so that directory paths are clearly
distinguished from module paths by either being rooted absolute paths or
starting with '.' or '..' path elements if they are relative paths.
go mod initwork now checks that the go.work file doesn't already exist
before creating it, and gomod initwork and gomod editwork look up the
module path corresponding to a directory and write it to the directory
directive's comment.
For #45713
Change-Id: I6983779059b7de6fc83d359280ceffb263f6b641
Reviewed-on: https://go-review.googlesource.com/c/go/+/347591
Trust: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
While type checking expressions involving interface types, it is
possible that their type set is used before delayed actions are
processed. As a result, computeInterfaceTypeSet is called with a nil
checker, and errors in the interface type definition result in panics
(see #48234).
To avoid the panics, store a *Checker on Interface for use in between
checking of the interface type expression and processing of delayed
actions.
Fixes#48234
Change-Id: I5509bc1c01b55edac52446b9e075fbe8fcc01874
Reviewed-on: https://go-review.googlesource.com/c/go/+/348371
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
As discussed on the go/types proposal (#47916), we should spell out the
word 'Type', rather than using 'T'.
Change-Id: I5f51255eedc07fea61f909b7ecb3093a7fab765e
Reviewed-on: https://go-review.googlesource.com/c/go/+/348376
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
As discussed in the ast proposal (#47781), there's not really a strong
reason to avoid spelling out 'Type'.
Change-Id: I0ba1bf03b112ea60509a78a89a050a302779d9d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/348375
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
This aligns with the API proposal.
Change-Id: I9967a317196392ffa5ddbe5391d7aba5f6e7bad2
Reviewed-on: https://go-review.googlesource.com/c/go/+/347561
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This is a pure code move, with no other changes.
Change-Id: Id31f1f960d3208dc614556de89bf39b7ca77df3a
Reviewed-on: https://go-review.googlesource.com/c/go/+/347560
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Implement deduplication of type instances via the Environment by
recording a map of unique IDs for *Named types. This avoids an issue
with the existing type hash, where qualified names alone were not
sufficient to differentiate two *Named types that have the same fully
qualified name but which are distinct pointers. It also allows us to
drop the scope accounting for local types.
A subtle bug is also fixed in subst.go, where the instance t was passed
to typeHash rather than t.orig.
Change-Id: I85639ccc1c9bfee470babd2fc85375484c8ed0b9
Reviewed-on: https://go-review.googlesource.com/c/go/+/344390
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Rather than create and delay execution of a closure for each type parameter
in a type parameter list, just create one per type parameter list.
While at it, inline the small amount of code for getting the type constraint
and remove the respective function.
Change-Id: I49a00ff0a7b7e43eb53992dd7dbfac25ff23b42c
Reviewed-on: https://go-review.googlesource.com/c/go/+/348018
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Check type constraints after the respective type parameter list
has been associated with a parameterized type so that recursive
type parameter constraints "see" a parameterized type.
Fixes#45550.
Fixes#47796.
Change-Id: Iac74610ca017a78013820624230c857395506aff
Reviewed-on: https://go-review.googlesource.com/c/go/+/348090
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Pull in the latest published version of github.com/google/pprof
that is available at this time in the Go 1.18 development cycle.
Done with:
go get -d github.com/google/pprof@latest
go mod tidy
go mod vendor
For #36905.
Change-Id: Ib25aa38365ec70a0bed2a8a6527e5823ab9f9ded
Reviewed-on: https://go-review.googlesource.com/c/go/+/348410
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
The codegen tests are currently skipped (see #48247). The test
added in CL 346050 did not compile because it was in the main
package but did not contain a main function. Changing the package
to 'codegen' fixes the issue.
Updates #48247.
Change-Id: I0a0eaca8e6a7d7b335606d2c76a204ac0c12e6d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/348392
Trust: Michael Munday <mike.munday@lowrisc.org>
Run-TryBot: Michael Munday <mike.munday@lowrisc.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The codegen tests are currently skipped (see #48247) and the
bitfield tests do not actually compile due to a duplicate function
name (sbfiz5) added in CL 267602. Renaming the function fixes the
issue.
Updates #48247.
Change-Id: I626fd5ef13732dc358e73ace9ddcc4cbb6ae5b21
Reviewed-on: https://go-review.googlesource.com/c/go/+/348391
Trust: Michael Munday <mike.munday@lowrisc.org>
Run-TryBot: Michael Munday <mike.munday@lowrisc.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
This test is not executed by default (see #48247) and does not
actually pass. It was added in CL 346689. The code generation
changes made in that CL only change how instructions are assembled,
they do not actually affect the output of the compiler. This test
is unfortunately therefore invalid and will never pass.
Updates #48247.
Change-Id: I0c807e4a111336e5a097fe4e3af2805f9932a87f
Reviewed-on: https://go-review.googlesource.com/c/go/+/348390
Trust: Michael Munday <mike.munday@lowrisc.org>
Run-TryBot: Michael Munday <mike.munday@lowrisc.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Now that issue #48124 is resolved, ran the
following commands inside the cmd module:
go get -d golang.org/x/tools@36045662144327e4475f9d356f49ab32ce730049 # main branch
go mod tidy
go mod vendor
For #36905.
Updates #48124.
Change-Id: I9dc736c2c5256f7d9e80fd9c52c6725ecf0b8001
Reviewed-on: https://go-review.googlesource.com/c/go/+/348409
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Trust: Alexander Rakoczy <alex@golang.org>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Setup .TOC. to point to the same place for all objects. Today, the linker
assumes all call relocations can use the local function entry point of
imported object files. This requires a consistent pointer across all
objects.
This intentionally computes the .TOC. pointer in all linking configurations.
In some cases the .TOC. is not used today (e.g linking position-dependent go
only code). It is harmless and simple to compute in all cases, so just
do it for easier maintenance.
Notably, .TOC. is used in some cases when static linking is requested on
ppc64le/linux:
* Position-independent C code using a PC-rel relocation against .TOC.. cgo
generated C object files are usually compiled PIC even if the go binary
itself is not.
* Anything which causes PLT stub generation. The stubs always generate
a .TOC. relative relocation.
* The race detector. Today, this links in an externally compiled archive which
contains position-independent object files.
Similarly, position-independent linking is always punted to the external
linker on ppc64 today.
Updates #21961Fixes#15409
Change-Id: Ifd8294b9249e16ba8b92eaf876d15d162f9c61fd
Reviewed-on: https://go-review.googlesource.com/c/go/+/304458
Reviewed-by: Cherry Mui <cherryyz@google.com>
Trust: Lynn Boger <laboger@linux.vnet.ibm.com>
Be consistent with both style/wording and formatting of error messages.
Change-Id: I23013d904333a67a8f17dd364bb5015f54f419c0
Reviewed-on: https://go-review.googlesource.com/c/go/+/345050
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Mui <cherryyz@google.com>
No functional change, but makes the code consistent and more readable.
Change-Id: I33db681fe0ed501842755f27b6e7843cdc8877cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/345049
Trust: Joel Sing <joel@sing.id.au>
Trust: Meng Zhuo <mzh@golangcn.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Meng Zhuo <mzh@golangcn.org>
Use cursym.WriteInt rather than building up a slice of bytes and then writing them
out via PutUint32. This also allows for variable instruction sizes, which will be
needed when support for compressed (2 byte length) instructions is added.
Change-Id: I17c9ffa52d27c91a24e161317e3db28e224804ae
Reviewed-on: https://go-review.googlesource.com/c/go/+/344460
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Replace the now poorly named rewriteMOV function with a markRelocs function,
absorbing the MOV validation into the instruction generation code.
Change-Id: I6ae94553f7f300862c40310343ef0be8f44a4b0f
Reviewed-on: https://go-review.googlesource.com/c/go/+/344459
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Rewrite and simplify the rewriteMOV function in preparation for eliminating it
entirely. Improve some error messages in the process.
Change-Id: Id9a77be5174d46cc23651930c2e9068ee6555690
Reviewed-on: https://go-review.googlesource.com/c/go/+/344458
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
I was a little too agressive in CL 258957 (removing 387 support) in
removing a signaling NaN test that should probably still exist.
I should have just removed the 387 skip, not the entire test.
Change-Id: I97ca53f190eb0de00e43b96629b2cae677e7dacb
Reviewed-on: https://go-review.googlesource.com/c/go/+/348209
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: Ic3c69906a8afde63278f173df0427b1c460c9f3e
Reviewed-on: https://go-review.googlesource.com/c/go/+/348189
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Added new function earlyTransformAssign() to add needed CONVIFACE nodes
due to assignments in generic functions.
Fixes#48049
Change-Id: I7cd9cee6ecf34ed2ef0743d1b17645b9f520fa00
Reviewed-on: https://go-review.googlesource.com/c/go/+/347914
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Update #40724
Change-Id: I110cdb7c4a2c5db6b85ca951143430555261abf3
Reviewed-on: https://go-review.googlesource.com/c/go/+/348017
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is easier to use in documentation.
Adjust the existing documentation that worked around the unfortunate name.
Change-Id: Ia4b7793ab94dfd7fb3968ee983be56cc38c30ec3
Reviewed-on: https://go-review.googlesource.com/c/go/+/347769
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This allows callers to do (amortized) allocation-free iteration
over many maps.
Fixes#46293
Change-Id: I3aa6134dd00da35b508bd1e3b487332a871a3673
Reviewed-on: https://go-review.googlesource.com/c/go/+/321891
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We had code in NewPtr() to set the HasTParam/HasShape flag as needed for
the cached ptr element if it wasn't set correctly based on its Elem.
This was causing the race mentioned in the issue.
But that setting code is no longer needed, as long as we call
SetRParams() soon after calling NewIncompleteNamedType(), before
creating/translating the underlying type (which we do). The
HasTParam/HasShape attribute can only come from setting of rparams or a
direct typeparam/shape somewhere in the underlying type, both of which
don't depend on recursion, etc. (as long as the rparams are set early).
Added a check that HasTParam/HasShape are set correctly for the cached
pointer/slice elems in NewPtr() and NewSlice().
Fixes#48191
Change-Id: Ide7d82efb77ae97901e75b2e6c65bd1bfc25e0ee
Reviewed-on: https://go-review.googlesource.com/c/go/+/348089
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
In CL 345572, we used the reflect.Value.SetLen method to avoid
extra memory allocation for reflect.Value.Slice.
This also applies to function decodeSlice
name old time/op new time/op delta
DecodeStringsSlice-12 96.5µs ±12% 63.0µs ± 8% -34.68% (p=0.000 n=9+10)
name old alloc/op new alloc/op delta
DecodeStringsSlice-12 89.3kB ± 0% 65.3kB ± 0% -26.89% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
DecodeStringsSlice-12 3.18k ± 0% 2.18k ± 0% -31.47% (p=0.000 n=10+10)
Change-Id: Ifdb43716cc90a265962dec022704a5571f447fd8
Reviewed-on: https://go-review.googlesource.com/c/go/+/347533
Reviewed-by: Joe Tsai <joetsai@digital-static.net>
Reviewed-by: Rob Pike <r@golang.org>
Trust: Joe Tsai <joetsai@digital-static.net>
Run-TryBot: Joe Tsai <joetsai@digital-static.net>
TryBot-Result: Go Bot <gobot@golang.org>
We should be putting a newly instantiated imported type in
Instantiate/doInst onto the instTypeList, so its methods/dictionaries
are instantiated. To do this, we needed a more general way to add a
type to instTypeList, so add NeedInstType(), analogous to
NeedRuntimeType(). This has the extra advantage that now all types
created by the type substituter are added to instTypeList without any
extra code, which was easy to forget. doInst() now correctly calls
NeedInstType().
This is a bit aggressive, since a fully instantiated type in a generic
function/method may never be used, if the generic method is never
instantiated in the local package. But it should be fairly uncommon for
a generic method to mention a fully instantiated type (but it does
happen in this bug).
Fixes both cases mentioned in the bug.
Fixed#48185
Change-Id: I19b5012dfac17e306c8005f8595a648b0ab280d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/347909
Trust: Dan Scales <danscales@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
If the condition is a bool constant, there's no need to walk both
branches.
Passes toolstash -cmp.
Change-Id: I4ee5e3553ce07c2213efba0d33d869b4a1b57783
Reviewed-on: https://go-review.googlesource.com/c/go/+/347911
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
