This cl is the first in a set that change the configuration behaviour.
This one should have no behaviour differences, but makes a lot of preparatory changes.
The same options are set to the same values in the same places.
The options are now stored on the Session instead of the Server
The View supports options, but does not have any yet.
Change-Id: Ie966cceca6878861686a1766d63bb8a78021259b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193726
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
If the client registers with foldingRange.lineFoldingOnly = true, only
return folding ranges that span multiple lines. Do this as they are
computed, so that if other filtering is applied later, we do not include
ranges that would go unused by the client anyway.
Change-Id: I27ea24428d25f180e26892de0f6d16c211225bf7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192477
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Invert "useDeepCompletions" config flag to "disableDeepCompletion" and
separate out "disableFuzzyMatching" which reverts to the previous
prefix matching behavior.
I separated fuzzy matching tests out to a separate file so they aren't
entangled with deep completion tests. In coming up with representative
test cases I found a couple issues which I fixed:
- We were treating a fuzzy matcher score of 0 as no match, but the
matcher returns 0 for candidates that match but have no bonuses. I
changed the matcher interface so that a score of 0 counts as a
match. For example, this was preventing a pattern of "o" from
matching "foo".
- When we lower a candidate's score based on its depth, we were
subtracting a static multiplier which could result in the score
going negative. A negative score messes up future score weighting
because multiplying it by a value in the range [0, 1) makes it
bigger instead of smaller. Fix by scaling a candidate's score based
on its depth rather than subtracting a constant factor.
Updates golang/go#32754
Change-Id: Ie6f9111f1696b0d067d08f7eed7b0a338ad9cd67
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192137
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Prepare rename gets the range of the identifier to rename. Returns an
error when there is no identifier to rename.
Change-Id: I5e5865bc9ff97e6a95ac4f0c48edddcfd0f9ed67
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191170
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now we register for and handle didChangeWatchedFiles "change"
events. We don't handle "create" or "delete" yet.
When a file changes on disk, there are two basic cases. If the editor
has the file open, we want to ignore the change since we need to
respect the file contents in the editor. If the file isn't open in the
editor then we need to re-type check (and re-diagnose) any packages it
belongs to.
We will need special handling of go.mod changes, but start with
just *.go files for now.
I'm putting the new behavior behind an initialization flag while it is
under development.
Updates golang/go#31553
Change-Id: I81a767ebe12f5f82657752dcdfb069c5820cbaa0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190857
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Unimported packages may be suggested as completion items. Since these
are not yet imported, they should be ranked lower than other candidates.
They also require an additional import statement to be valid, which is
provided as an AdditionalTextEdit.
Adding this import does not use astutil.AddNamedImport, to avoid
editing the current ast and work even if there are errors. Additionally,
it can be hard to determine what changes need to be made to the source
document from the ast, as astutil.AddNamedImport includes a merging
pass. Instead, the completion item simply adds another import
declaration.
Change-Id: Icbde226d843bd49ee3713cafcbd5299d51530695
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190338
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change keys the supported code actions map by file kind, so that we
can extend it more easily for go.mod files.
Change-Id: Ic28f91bd517700cf070281b1c4d4ded14a702790
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189039
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Set the server state to initialized so that dynamic configuration
requests will be sent to the client.
Rename the mutex that guards state. The state field was previously named
initialized, so it only makes sense to similarly rename the mutex that
guards the state field.
Always unlock stateMu before calling other functions so that callees
that need to check state can acquire the lock.
Change-Id: Ia5592ca1dedfc6f004ae6b61548890624ae98d59
Reviewed-on: https://go-review.googlesource.com/c/tools/+/188097
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Also add enough support that using it from within the context of the lsp will
report back to the original client.
Change-Id: I081f157c289642454e9f0476747b2131dcd4e16c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185996
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds documentation to the completion items. This normally
should be done in completionItem/resolve, since it takes more time to
compute documentation. However, I am not sure if that latency incurred
by pre-computing documentation is actually significantly more than the
latency incurred by an extra call to 'completionItem/resolve'. This
needs to be investigated, so we begin by just precomputing all of the
documentation for each item.
Updates golang/go#29151
Change-Id: I148664d271cf3f1d089c1a871901e3ee404ffbe8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184721
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Instead of defaulting to a one sentence synopsis for documentation on
hover, allow the user to configure the amount of documentation they want
to see. Right now, the options are none, some (using go/doc.Synopsis),
or all. We should add a 4th, single-line, mode, which will allow clients
like vim-go to stop stripping off documentation on hover.
Updates golang/go#32561
Change-Id: I529242da84b794636984d5ef2918b7252886f0ef
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184797
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change refactors code actions to handle the Context.Only parameter,
which indicates which code actions a language server should execute.
Change-Id: Iddfccbbeba3a53fde2aa8df844434f2ab9d01666
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184158
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Deep completion refers to searching through an object's fields and
methods for more completion candidates. For example:
func wantsInt(int) { }
var s struct { i int }
wantsInt(<>)
Will now give a candidate for "s.i" since its type matches the
expected type.
We limit to three deep completion results. In some cases there are
many useless deep completion matches. Showing too many options defeats
the purpose of "smart" completions. We also lower a completion item's
score according to its depth so that we favor shallower options. For
now we do not continue searching past function calls to limit our
search scope. In other words, we are not able to suggest results with
any chained fields/methods after the first method call.
Deep completions are behind the "useDeepCompletions" LSP config flag
for now.
Change-Id: I1b888c82e5c4b882f9718177ce07811e2bccbf22
GitHub-Last-Rev: 26522363730036e0b382a7bcd10aa1ed825f6866
GitHub-Pull-Request: golang/tools#100
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177622
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change provides support to rename identifiers within a single
package.
The renaming is performed by finding all references to an identifier,
and then creating text edits to replace the existing text with the
new identifier.
Editing an import spec is not supported.
Fixes#27571
Change-Id: I0881b65a1b3c72d7c53d7d6ab1ea386160dc00fb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182585
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds an "experimentalDisabledAnalyses" configuration
to the "gopls" configuration. A user can specify a list of excluded
analyses by analyzer name.
Fixesgolang/go#31717
Change-Id: I4b162fcd61ecfcef5c926bd0e96f182748a7721d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179920
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change implements the find all references feature by finding all of
the uses and definitions of the identifier within the current package.
Testing for references is done using "refs" in the testdata files and
marking the references in the package.
Change-Id: Ieb44b68608e940df5f65c3052eb9ec974f6fae6c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/181122
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
These are the latest changes to vscode-languageserver-node brought to Go.
Change-Id: I88d0b384356964c358cb2c51ea3b79cb6b51b434
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178357
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is primarily to separate the levels because they have different cache
lifetimes and sharability.
This will allow us to share results between views and even between servers.
Change-Id: I280ca19d17a6ea8a15e48637d4445e2b6cf04769
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177518
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change removes the explicit configuration for improved
documentation on hover. We use a comment's synopsis rather than the full
comment.
However, we also add a "noDocsOnHover" setting that is used by the cmd
tests. Ultimately, no one should use this setting and we should remove
it. We leave it temporarily because the cmd tests still need work.
Change-Id: I5488eca96a729ed7edad8f59b95af163903740d6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174378
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The cache now exposes only one symbol, NewView
This is preparing the cache for a re-write
Change-Id: I411c2cd7a7edc2e7c774218c6786f9fd4fcc53cb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176924
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change stops diagnostics from running in files making up the "fake"
builtin package.
Fixesgolang/go#31962
Change-Id: Ic54e1587e3ad54f0c1f5e82f1a6f3522b4c6bee9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177218
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This also required us to change the way we map files to a view, as it may change
over time.
Fixesgolang/go#31635
Change-Id: Ic82467a1185717081487389f4c25ad69df1af290
Reviewed-on: https://go-review.googlesource.com/c/tools/+/175477
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
RangeFormatting was broken with the introduction of the diff library,
but not noticed until golang/go#31150. Temporarily disable this behavior
until we fix it.
Change-Id: Ie3e50a763e0c0e8672ad20c3a2e37d901325d356
Reviewed-on: https://go-review.googlesource.com/c/tools/+/175938
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The generated code adds some server methods that are unsupported, but were
prviously unimplemented, and makes small adjusments to some parameter types.
Change-Id: I3dd32cafa3e457193f0771e0f8e150c88b381c82
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173420
Run-TryBot: Peter Weinberger <pjw@google.com>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change associates an ast.Node for some object declarations.
In this case, we only handle type declarations, but future changes will
support other objects as well. This is the first step in adding
documentation on hover.
Updates golang/go#29151
Change-Id: I39ddccf4130ee3b106725286375cd74bc51bcd38
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172661
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change separates the different behaviors of server.go by the
categories defined in the spec. This allows us to differentiate more
easily between the language features and the text synchronization code.
I also renamed the "Symbols" function to "Symbol", which fits with the
specification
(https://microsoft.github.io/language-server-protocol/specification#workspace_symbol),
and makes clearer the distinction between DocumentSymbols and Symbol.
Change-Id: I926b8a772c478f6ae426352fb12dc4403f0e736a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172637
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
- show signature for function calls whose function expression is not
an object (e.g. the second call in foo()()). since the function name
is not available, we use the generic "func"
- only provide signature help when the position is on or within the
call expression parens. this is consistent with the one other lsp
server i tried (java). this improves the gopls experience in emacs
where lsp-mode is constantly calling "hover" and
"signatureHelp" ("hover" should be preferred unless you are inside
the function params list)
- use the entire signature type string as the label since that includes
the return values, which are useful to see
- don't qualify the function name with its package. it looks funny to
see "bytes.Cap()" as the help when you are in a call
to (*bytes.Buffer).Cap(). it could be useful to include invocant
type info, but leave it out for now since signature help is meant to
focus on the function parameters.
- don't turn variadic args "foo ...int" into "foo []int" for the
parameter information (i.e. maintain it as "foo ...int")
- when determining active parameter, count the space before a
parameter name as being part of that parameter (e.g. the space
before "b" in "func(a int, b int)")
- handle variadic params when determining the active param (i.e.
highlight "foo(a int, *b ...string*)" on signature help for final
param in `foo(123, "a", "b", "c")`
- don't generate an extra space in formatParams() for unnamed
arguments
I also tweaked the signatureHelp server log message to include the
error message itself, and populated the server's logger in lsp_test.go
to aid in development.
Fixesgolang/go#31448
Change-Id: Iefe0e1e3c531d17197c0fa997b949174475a276c
GitHub-Last-Rev: 5c0b8ebd87a8c05d5d8f519ea096f94e89c77e2c
GitHub-Pull-Request: golang/tools#82
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172439
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change makes sure that we never return error messages for
completions and signature help requests - just empty results.
Change-Id: I00d75cd116daab63beb07f2344e47aac01bb64ee
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170958
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
go.ts, the program that generates Go types for the LSP protocol, now
handles Typescript type merging for ClientCapabilites, so fields are no
longer missing. Also, to silence go lint and go vet there are changes
in the comments generated in tsprotocol.go. All the *structs were changed
to structs in ClientCapabilities as it was absurdly complex to write literals
of the type. Finally, several otherwise unused types are no longer
generated.
Change-Id: If414a32bc4d733adb2cf8befda9d8a0703c568a6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/171026
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change makes codeActions look at the diagnostics provided before
responding. Specifically, before running "source.organizeImports", we
check if there is a diagnostic relating to imports.
Change-Id: I5268d5e8f144c4f2e085b2a861d0abfb7614323b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170997
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change allows us to determine if we should complete with
placeholders in the function signature or not.
We currently complete all functions with parameters with a set of
parentheses with the cursor between them. Now, we support the option to
tab through the parameters.
Change-Id: I01d9d7ffdc76eb2f8e009ab9c8aa46d71c24c358
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170877
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This uses the workspace folders to build multiple views, and then tries to pick
the right view to send each incomming request to.
Change-Id: I0cc896dbbc67eb0a88225ddeca6c518f4258bbba
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170179
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds a cache of undelivered diagnostics on the server-side.
If we fail to send a diagnostic once, we will retry the next time that
the server sends diagnostics.
Change-Id: I161dfad8ea1d2cfdcee933baed2d6872dc03b0c0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167737
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Also use it for errors that were otherwise silently dropped
This makes it much easier to debug problems.
Also added command line control over whether the rpc trace messages are printed, which allows you to read the
log, otherwise the file edit messages swamp the log.
Change-Id: I7b70fd18034a87b2964e6d6d5f6f33dcaf7d8ea8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170178
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now the jsonrpc2 library allows you to call outgoing methods within a handler
we can clean up some stuff and also have it work correctly in more cases.
Change-Id: I8633069816d92f7cc16842431775efb1a98a506a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170008
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This changes the basic API of a jsonrpc2 connection to run the
read loop as a method rather than in a go routine launched in
the NewConn. This allows the handler to be created and bound
between construction and the read loop starting, which fixes
the race.
Fixesgolang/go#30091
Change-Id: I8201175affe431819cf473e5194d70c019f58425
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170003
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This connects up the configuration message, and uses it to allow the client to set the environment
in the config passed to packages.Load
Change-Id: I75e03c01c74e9b11c8b4c47b9cbdd0574cddf778
Reviewed-on: https://go-review.googlesource.com/c/tools/+/169704
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is the first step of fixing gopls on Windows.
Change-Id: I20cea63051f448cba86996edaf7a8347b0d20bd1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/169444
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Change span to hide its fields and have validating accessors
This catches the cases where either the offset or the position is being used
when it was not set.
It also normalizes the forms as the API now controls them, and allows us to
simplify some of the logic.
The converters are now allowed to return an error, which lets us cleanly
propagate bad cases.
The lsp was then converted to the new format, and also had some error checking
of its own added on the top.
All this allowed me to find and fix a few issues, most notably a case where the
wrong column mapper was being used during the conversion of definition results.
Change-Id: Iebdf8901e8269b28aaef60caf76574baa25c46d4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167858
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Gopls presently uses hand-coded data types (in internal/lsp/protocol)
for communicating with LSP clients. Instead, modify it to use the
automatically generated file (internal/lsp/protocol/tsprotocol.go).
Replaced files have been put (temporarily) in a directory 'preserve'
so readers can compare the old data types with the new ones.
Change-Id: Idfa53a5783e2d6a47e03b20641dd76fbc2c32677
Reviewed-on: https://go-review.googlesource.com/c/tools/+/166757
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds an additional cache for type information, which here is
just a *packages.Package for each package. The metadata cache maintains
the import graph, which allows us to easily determine when a package X
(and therefore any other package that imports X) should be invalidated.
Additionally, rather than performing content changes as they happen, we
queue up content changes and apply them the next time that any type
information is requested.
Updates golang/go#30309
Change-Id: Iaf569f641f84ce69b0c0d5bdabbaa85635eeb8bf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165438
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
It is difficult to debug gopls in combination with the incremental
changes feature. Because gopls is slow (caching CL is in progress), it
seems like the incremental changes can sometimes produce strange
behavior. Disable it for now until we can prioritize work on it.
Change-Id: I931aa39756f198d1af21dca359acc83ca3392c4c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165023
Reviewed-by: Michael Matloob <matloob@golang.org>
we don't really use them, only generate them in cases where the failure is way more fundamental, and then also fail
to remember them for the next call to the same accessor. Better to not have them.
Change-Id: I0e8abeda688f5cc2a932ed95a80d89225c399f93
Reviewed-on: https://go-review.googlesource.com/c/162399
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds a copy of the parseFiles function from go/packages for
file parsing. Also fix crash caused by lack of TypeSizes from
go/packages.Load when using LoadImports mode.
Change-Id: Ie8c3c653679ab81da45905c6839de7e63966d84c
Reviewed-on: https://go-review.googlesource.com/c/161670
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Also adding in --remote support and using it to implement the equivalent
functionality of the external forward command
Also adding in --listen as a replacement for --port as it is more flexible,
specifically it allows localhost:port which
is helpful in environments where opening remotely accesible ports is
problematic.
Change-Id: I5de1cea7dd6f1ee46e7423f3be2a4caca6f040b2
Reviewed-on: https://go-review.googlesource.com/c/161658
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change moves gopls from type-checking packages using the
go/packages API to type-checking from source. This is the first step in
adding caching to gopls.
Change-Id: I2a7dcfd8c9c0bfc6c35c86eadcdc6f9ce53d9be7
Reviewed-on: https://go-review.googlesource.com/c/161497
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change makes sure to handle escaped characters, for instance, files
in the module cache contain "@" in the path. Also, return errors when a
package is not found for a file.
Updates golang/go#30027
Change-Id: I6c4f6d0f30dde55701308b89785f02b671e81cc6
Reviewed-on: https://go-review.googlesource.com/c/161077
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Yasuhiro MATSUMOTO <mattn.jp@gmail.com>
The source package now exposes an Identifier method that returns information
about an identifier, which can be used to implement Definition, TypeDefinition
and Hover, as well as other command line functions in a later cl.
Change-Id: I03629c2c940215b4e2c86ee45bee8a18b79ee0e1
Reviewed-on: https://go-review.googlesource.com/c/159337
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change allows golsp to be run on a port, with an intermediary
command passing the data through. This allows for improved logging.
Also, add necessary changes to VSCode integration to allow changing the
name of the command for golsp.
Change-Id: I20dca1a50296636e57e022342ee70f0610ad1531
Reviewed-on: https://go-review.googlesource.com/c/157497
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Refactor code as a follow-up to
https://go-review.googlesource.com/c/tools/+/154742.
Also, change every instance of "source.URI()" to "fromProtocolURI", so
that we can add a better implementation of that later on (for Windows
support).
Change-Id: Ifa24ffd7e1aebf1f7d05df6f65742769ead0922f
Reviewed-on: https://go-review.googlesource.com/c/154741
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Added a View interface to the source package, which allows for reading
of other files (in the same package or in other packages). We were
already reading files in jump to definition (to handle the lack of
column information in export data), but now we can also read files in
diagnostics, which allows us to determine the end of an identifier so
that we can report ranges in diagnostic messages.
Updates golang/go#29150
Change-Id: I7958d860dea8f41f2df88a467b5e2946bba4d1c5
Reviewed-on: https://go-review.googlesource.com/c/154742
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds support for goimports as a code action that can be run
on save. However, there do appear to be issues with the propagation of
the context.Only field of the CodeActionParams, so we treat every
codeAction as an organizeImports action - this should be fixed in the
next vscode-languageclient release
(https://github.com/Microsoft/vscode-languageserver-node/issues/442).
Change-Id: I64ca0034c393762248fde6521aba86ed9d41bf70
Reviewed-on: https://go-review.googlesource.com/c/154338
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change separates a cache package out of the
golang.org/x/tools/internal/lsp/source package. The source package now
uses an interface instead a File struct, which will allow it be reused
more easily. The cache package contains the View and File structs now.
Change-Id: Ia2114e9dafc5214c8b21bceba3adae1c36b9799d
Reviewed-on: https://go-review.googlesource.com/c/152798
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds a very simple implementation of hovering. It doesn't
show any documentation, just the object string for the given object.
Also, this change sets the prefix for composite literals, making sure we
don't insert duplicate text.
Change-Id: Ib706ec821a9e459a6c61c10f5dd28d1798944fa3
Reviewed-on: https://go-review.googlesource.com/c/152599
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The LSP specification doesn't have a Score field, so we must provide
sortText to the protocol in order to maintain the correct order.
Change-Id: I075849f520c21a0465dfb2060c598d8bae5f876b
Reviewed-on: https://go-review.googlesource.com/c/151237
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Also, trigger signature help on completion of a function (the "(" as a
trigger character doesn't work if it's part of a completion).
Change-Id: I952cb875fa72a741d7952178f85e20f9efa3ebff
Reviewed-on: https://go-review.googlesource.com/c/150638
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
If signature help is enabled, we should not offer parameter suggestions.
If signature help is not enabled, the user should be able to tab
through parameter completions.
Change-Id: I10990ef4aefb306ddbf51ed14cc1110065eba655
Reviewed-on: https://go-review.googlesource.com/c/150637
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
If a file ends with an empty newline, go/token treats the newline as the
final character of the previous line. VSCode, however, treats this as a
final line with no characters. We handle this by determining if the file
we are formatting ends with a newline character and updating the
protocol ranges accordingly.
Change-Id: Id8be0fd776ae65c8f0f937f3e718825e407cb217
Reviewed-on: https://go-review.googlesource.com/c/150338
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This makes our internal version of go to definition be tested with the
same test data that godef now uses
Change-Id: I04e488b6b9b2d891181f202ea1125b823a079c50
Reviewed-on: https://go-review.googlesource.com/c/150045
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The go/format.Node function fails silently on malformed ASTs, even
though it writes out an invalid tree containing the strings "BadExpr"
and "BadStmt". We fix this by checking for *ast.Bad{Expr,Decl,Stmt}
before running the function. Ultimately, this should be fixed upstream
and just return an error from format.Node.
Change-Id: I2ba25551f0e97c0321d8e757de67360af44044d7
Reviewed-on: https://go-review.googlesource.com/c/149613
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Add SignatureHelp functionality to source package. Tests will be added
in a subsequent change.
Change-Id: Ia43280946d96a984c5741273a00c12255d637b2a
Reviewed-on: https://go-review.googlesource.com/c/149177
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
This makes the format code use the AST that is already cached on the file to do
the formatting. It also moves the core format code into the source directory.
Change-Id: Iaa79169708e92525cce326ea094ab98144fe1011
Reviewed-on: https://go-review.googlesource.com/c/148198
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The completion function belongs in internal/lsp/source, so move it
there. Some small refactoring of completion, by moving each type of
completion into helper functions that append to the list of results.
Change-Id: I8599092906609591d499183657fe2d21d1f74df1
Reviewed-on: https://go-review.googlesource.com/c/148397
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This enables go to definition for the lsp.
It has one known non working case (where the filenames have $GOROOT in them)
Change-Id: I142c6e04b8691c5076dfcd55592ea710b4b361a4
Reviewed-on: https://go-review.googlesource.com/c/148158
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
I realized this was a mistake, we should try to keep the source
directory independent of the LSP protocol itself, and adapt in
the outer layer.
This will keep us honest about capabilities, let us add the
caching and conversion layers easily, and also allow for a future
where we expose the source directory as a supported API for other
tools.
The outer lsp package then becomes the adapter from the core
features to the specifics of the LSP protocol.
Change-Id: I68fd089f1b9f2fd38decc1cbc13c6f0f86157b94
Reviewed-on: https://go-review.googlesource.com/c/148157
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Add an autocompletion implementation to the LSP. Also, add a function
that type-checks a package at a certain position, returning an *ast.File
and token.Pos for querying completion.
Change-Id: I288d4e6ed168e6014e79a4436f31f5b4a99b7139
Reviewed-on: https://go-review.googlesource.com/c/147657
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
A file is strongly associated with a view, and knows how to manage it's own
contents.
We can also now track files that are not "active"
Change-Id: Ib9474cd40e5caa3db6596548612a9f90168b8a19
Reviewed-on: https://go-review.googlesource.com/c/147204
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This allows us to write the lsp verbs in terms of a stable underlying source
management layer.
This should make it easier to refactor the underlying layer to add more powerful
caching and incremental modes as we go.
Change-Id: Iab97b061d80394a6fa6748a93a4c68f2deb46129
Reviewed-on: https://go-review.googlesource.com/c/147201
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Add some basic tests for diagnostics using the new
go/packages/packagestest framework.
Change-Id: I6a7bfba6c392928a9eb123ab71ceb73785c12600
Reviewed-on: https://go-review.googlesource.com/c/145697
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Any time a file is changed, we compute diagnostics for its package and
return them to the client. No caching is implemented yet, so we parse
and type-check the package each time.
Change-Id: I7fb2f1d8975e7ce092938d903599188cc2132512
Reviewed-on: https://go-review.googlesource.com/c/143497
Reviewed-by: Alan Donovan <adonovan@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Refactor code a bit to support range formatting as well document
formatting. Also, separate view from server to clean up.
Change-Id: Ica397c7a0fb92a7708ea247c2d5de83e5528d8d4
Reviewed-on: https://go-review.googlesource.com/138275
Reviewed-by: Alan Donovan <adonovan@google.com>
This commit adds support for some basic commands necessary for
integration with VSCode. It also adds support for the
"textDocument/format" method.
Change-Id: I8fd0e33ca544ab65d3233efe2fef9716446ad4ff
Reviewed-on: https://go-review.googlesource.com/138135
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>