Change-Id: I39af932b789cd18dc4bfc84f9667b1c32c9825f4
Reviewed-on: https://go-review.googlesource.com/c/go/+/567476
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
CL 517775 moved early deadcode into unified writer. with new way to
handle dead code with label statement involved: any statements after
terminating statement will be considered dead until next label
statement.
However, this is not safe, because code after label statement may still
refer to dead statements between terminating and label statement.
It's only safe to remove statements after terminating *and* label one.
Fixes#65593
Change-Id: Idb630165240931fad50789304a9e4535f51f56e2
Reviewed-on: https://go-review.googlesource.com/c/go/+/565596
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Use quotes to wrap user-supplied token in the syntax error message.
Updates #65790
Change-Id: I631a63df4a6bb8615b7850a324d812190bc15f30
GitHub-Last-Rev: f291e1d5a6
GitHub-Pull-Request: golang/go#65840
Reviewed-on: https://go-review.googlesource.com/c/go/+/565518
Reviewed-by: Carlos Amedee <carlos@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
types2 handles all constant-related bounds checks in user Go code now,
so it's safe to remove the check from typecheck, avoid the inconsistency
with type parameter.
Fixes#65417
Change-Id: I82dd197b78e271725d132b5a20450ae3e90f9abc
Reviewed-on: https://go-review.googlesource.com/c/go/+/560575
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Griesemer <gri@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Enable canRotate for riscv64, enable rotation intrinsics and provide
better rewrite implementations for rotations. By avoiding Lsh*x64
and Rsh*Ux64 we can produce better code, especially for 32 and 64
bit rotations. By enabling canRotate we also benefit from the generic
rotation rewrite rules.
Benchmark on a StarFive VisionFive 2:
│ rotate.1 │ rotate.2 │
│ sec/op │ sec/op vs base │
RotateLeft-4 14.700n ± 0% 8.016n ± 0% -45.47% (p=0.000 n=10)
RotateLeft8-4 14.70n ± 0% 10.69n ± 0% -27.28% (p=0.000 n=10)
RotateLeft16-4 14.70n ± 0% 12.02n ± 0% -18.23% (p=0.000 n=10)
RotateLeft32-4 13.360n ± 0% 8.016n ± 0% -40.00% (p=0.000 n=10)
RotateLeft64-4 13.360n ± 0% 8.016n ± 0% -40.00% (p=0.000 n=10)
geomean 14.15n 9.208n -34.92%
Change-Id: I1a2036fdc57cf88ebb6617eb8d92e1d187e183b2
Reviewed-on: https://go-review.googlesource.com/c/go/+/560315
Reviewed-by: M Zhuo <mengzhuo1203@gmail.com>
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Mark Ryan <markdryan@rivosinc.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
This CL separates the pass that computes inlinability from the pass
that performs inlinability. In particular, the latter can now happen
in any flat order, rather than bottom-up order. This also allows
inlining of calls exposed by devirtualization.
Change-Id: I389c0665fdc8288a6e25129a6744bfb1ace1eff7
Reviewed-on: https://go-review.googlesource.com/c/go/+/562319
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
As CL 514596 and CL 514775 adds hardware implement of float
max/min, we should add codegen test for these two CL.
Change-Id: I347331032fe9f67a2e6fdb5d3cfe20203296b81c
Reviewed-on: https://go-review.googlesource.com/c/go/+/561295
Reviewed-by: Joel Sing <joel@sing.id.au>
TryBot-Result: Gopher Robot <gobot@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: M Zhuo <mengzhuo1203@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
This CL improves the error messages reported when a field or method
name is used that doesn't exist. It brings the error messges on par
(or better) with the respective errors reported before Go 1.18 (i.e.
before switching to the new type checker):
Make case distinctions based on whether a field/method is exported
and how it is spelled. Factor out that logic into a new function
(lookupError) in a new file (errsupport.go), which is generated for
go/types. Use lookupError when reporting selector lookup errors
and missing struct field keys.
Add a comprehensive set of tests (lookup2.go) and spot tests for
the two cases brought up by the issue at hand.
Adjusted existing tests as needed.
Fixes#49736.
Change-Id: I2f439948dcd12f9bd1a258367862d8ff96e32305
Reviewed-on: https://go-review.googlesource.com/c/go/+/560055
Run-TryBot: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Rather than implementing a new, less complete mechanism to check
if a selector exists with different capitalization, use the
existing mechanism in lookupFieldOrMethodImpl by making it
available for internal use.
Pass foldCase parameter all the way trough to Object.sameId and
thus make it consistently available where Object.sameId is used.
From sameId, factor out samePkg functionality into stand-alone
predicate.
Do better case distinction when reporting an error for an undefined
selector expression.
Cleanup.
Change-Id: I7be3cecb4976a4dce3264c7e0c49a320c87101e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/558315
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This do:
- Fold always false or always true comparisons for ints and uint.
- Reduce < and <= where the true set is only one value to == with such value.
Change-Id: Ie9e3f70efd1845bef62db56543f051a50ad2532e
Reviewed-on: https://go-review.googlesource.com/c/go/+/555135
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
The input index to a jump table can be out of range for unreachable code.
Dynamically the compiler ensures that an out-of-range index can never
reach a jump table, but that guarantee doesn't extend to the static
realm.
Fixes#64826
Change-Id: I5829f3933ae5124ffad8337dfd7dd75e67a8ec33
Reviewed-on: https://go-review.googlesource.com/c/go/+/552055
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: David Chase <drchase@google.com>
Per the discussion on the issue, since no problems related to this
appeared since Go 1.20, remove the ability to disable the check for
anonymous interface cycles permanently.
Adjust various tests accordingly.
For #56103.
Change-Id: Ica2b28752dca08934bbbc163a9b062ae1eb2a834
Reviewed-on: https://go-review.googlesource.com/c/go/+/550896
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Add a skip for this test that effectively disables it for 32-bit platforms,
so as to not run into timeouts or OOMs on smaller machines.
Fixes#64789.
Change-Id: I2d428e1dccae62b8bb1a69c5f95699692a282bbb
Reviewed-on: https://go-review.googlesource.com/c/go/+/550975
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Right shifts, for some odd reasons, can encode shifts of constant
1-32 instead of 0-31. Left shifts, however, can encode shifts 0-31.
When the shift amount is 0, arm recommends encoding right shifts
using left shifts.
Fixes#64715
Change-Id: Id3825349aa7195028037893dfe01fa0e405eaa51
Reviewed-on: https://go-review.googlesource.com/c/go/+/549955
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Keith Randall <khr@google.com>
This commit is aimed at improving the readability and consistency
of the code base. Extraneous newline characters were present after
some return statements, creating unnecessary separation in the code.
Fixes#64610
Change-Id: Ic1b05bf11761c4dff22691c2f1c3755f66d341f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/548316
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
We can't delete all the outgoing edges and then add one back in, because
then we've lost the argument of any phi at the target. Instead, move
the important target to the front of the list and delete the rest.
This normally isn't a problem, because there is never normally a phi
at the target of a jump table. But this isn't quite true when in race
build mode, because there is a phi of the result of a bunch of raceread
calls.
The reason this happens is that each case is written like this (where e
is the runtime.eface we're switching on):
if e.type == $type.int32 {
m = raceread(e.data, m1)
}
m2 = phi(m1, m)
if e.type == $type.int32 {
.. do case ..
goto blah
}
so that if e.type is not $type.int32, it falls through to the default
case. This default case will have a memory phi for all the (jumped around
and not actually called) raceread calls.
If we instead did it like
if e.type == $type.int32 {
raceread(e.data)
.. do case ..
goto blah
}
That would paper over this bug, as it is the only way to construct
a jump table whose target is a block with a phi in it. (Yet.)
But we'll fix the underlying bug in this CL. Maybe we can do the
rewrite mentioned above later. (It is an optimization for -race mode,
which isn't particularly important.)
Fixes#64606
Change-Id: I6f6e3c90eb1e2638112920ee2e5b6581cef04ea4
Reviewed-on: https://go-review.googlesource.com/c/go/+/548356
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
When I was plumbing min/max support through the compiler, I was
thinking mostly about numeric argument types. As a result, I forgot
that escape analysis would need to be aware that min/max can operate
on string values, which contain pointers.
Fixes#64565.
Change-Id: I36127ce5a2da942401910fa0f9de922726c9f94d
Reviewed-on: https://go-review.googlesource.com/c/go/+/547715
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Mauri de Souza Meneguzzo <mauri870@gmail.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
The code generation on riscv64 will currently result in incorrect
assembly when a 32 bit integer is right shifted by an amount that
exceeds the size of the type. In particular, this occurs when an
int32 or uint32 is cast to a 64 bit type and right shifted by a
value larger than 31.
Fix this by moving the SRAW/SRLW conversion into the right shift
rules and removing the SignExt32to64/ZeroExt32to64. Add additional
rules that rewrite to SRAIW/SRLIW when the shift is less than the
size of the type, or replace/eliminate the shift when it exceeds
the size of the type.
Add SSA tests that would have caught this issue. Also add additional
codegen tests to ensure that the resulting assembly is what we
expect in these overflow cases.
Fixes#64285
Change-Id: Ie97b05668597cfcb91413afefaab18ee1aa145ec
Reviewed-on: https://go-review.googlesource.com/c/go/+/545035
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: M Zhuo <mzh@golangcn.org>
Reviewed-by: Mark Ryan <markdryan@rivosinc.com>
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Gopher Robot <gobot@golang.org>
With range over int, the rune literal in range expression will be left
as untyped rune, but idealType is not handling this case, causing ICE.
Fixing this by setting the concrete type for untyped rune expresison.
Fixes#64471
Change-Id: I07a151c54ea1d9e1b92e4d96cdfb6e73dca13862
Reviewed-on: https://go-review.googlesource.com/c/go/+/546296
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
The shift amounts were wrong in this case, leading to miscompilation
of load combining.
Also the store combining was not triggering when it should.
Fixes#64468
Change-Id: Iaeb08972c5fc1d6f628800334789c6af7216e87b
Reviewed-on: https://go-review.googlesource.com/c/go/+/546355
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Mauri de Souza Meneguzzo <mauri870@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
order.go ensures expressions that are passed to the runtime by address
are in fact addressable. However, in the case of local variables, if the
variable hasn't already been marked as addrtaken, then taking its
address here will effectively prevent the variable from being converted
to SSA form.
Instead, it's better to just copy the variable into a new temporary,
which we can pass by address instead. This ensures the original variable
can still be converted to SSA form.
Fixes#63332.
Change-Id: I182376d98d419df8bf07c400d84c344c9b82c0fb
Reviewed-on: https://go-review.googlesource.com/c/go/+/541715
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
This CL interleaves devirtualization and inlining, so that
devirtualized calls can be inlined.
Fixes#52193.
Change-Id: I681e7c55bdb90ebf6df315d334e7a58f05110d9c
Reviewed-on: https://go-review.googlesource.com/c/go/+/528321
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Bypass: Matthew Dempsky <mdempsky@google.com>
The early return here is meant to suppress inlining of the function
call itself. However, it also suppresses recursing to visit the call
arguments, which are safe to inline.
Change-Id: I75887574c00931cb622277d04a822bc84c29bfa2
Reviewed-on: https://go-review.googlesource.com/c/go/+/543658
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
This patch reworks how inlheur.AnalyzeFunc is called by the top level
inliner. Up until this point the strategy was to analyze a function at
the point where CanInline is invoked on it, however it simplifies
things to instead make the call outside of CanInline (for example, so
that directly recursive functions can be analyzed).
Also as part of this patch, change things so that we no longer run
some of the more compile-time intensive analysis on functions that
haven't been marked inlinable (so as to safe compile time), and add a
teardown/cleanup hook in the inlheur package to be invoked by the
inliner when we're done inlining.
Change-Id: Id0772a285d891b0bed66dd86adaffa69d973c26a
Reviewed-on: https://go-review.googlesource.com/c/go/+/539318
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This test erroneously assumes that there will always be at least one
live object accounted for in a MemProfileRecord. This is not true; all
memory allocated from a particular location could be dead.
Fixes#64153.
Change-Id: Iadb783ea9b247823439ddc74b62a4c8b2ce8e33e
Reviewed-on: https://go-review.googlesource.com/c/go/+/542736
Reviewed-by: Cherry Mui <cherryyz@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Generate the CC version of many opcodes whose result is compared against
signed 0. The approach taken here works even if the opcode result is used in
multiple places too.
Add support for ADD, ADDconst, ANDN, SUB, NEG, CNTLZD, NOR conversions
to their CC opcode variant. These are the most commonly used variants.
Also, do not set clobberFlags of CNTLZD and CNTLZW, they do not clobber
flags.
This results in about 1% smaller text sections in kubernetes binaries,
and no regressions in the crypto benchmarks.
Change-Id: I9e0381944869c3774106bf348dead5ecb96dffda
Reviewed-on: https://go-review.googlesource.com/c/go/+/538636
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Jayanth Krishnamurthy <jayanth.krishnamurthy@ibm.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
This optab matching rule was used to match signed 16 bit values shifted
left by 16 bits. Unsigned 16 bit values greater than 0x7FFF<<16 were
classified as C_U32CON which led to larger than necessary codegen.
Instead, rewrite logical/arithmetic operations in the preprocessor pass
to use the 16 bit shifted immediate operation (e.g ADDIS vs ADD). This
simplifies the optab matching rules, while also minimizing codegen size
for large unsigned values.
Note, ADDIS sign-extends the constant argument, all others do not.
For matching opcodes, this means:
MOVD $is<<16,Rx becomes ADDIS $is,Rx or ORIS $is,Rx
MOVW $is<<16,Rx becomes ADDIS $is,Rx
ADD $is<<16,[Rx,]Ry becomes ADDIS $is[Rx,]Ry
OR $is<<16,[Rx,]Ry becomes ORIS $is[Rx,]Ry
XOR $is<<16,[Rx,]Ry becomes XORIS $is[Rx,]Ry
Change-Id: I1a988d9f52517a04bb8dc2e41d7caf3d5fff867c
Reviewed-on: https://go-review.googlesource.com/c/go/+/536735
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Range over integer is enabled now without the GOEXPERIMENT. The
GOEXPERIMENT is only for range over func. Rename it to rangefunc.
For #61405.
Change-Id: I9405fb8e2e30827875716786823856090a1a0cad
Reviewed-on: https://go-review.googlesource.com/c/go/+/539277
Reviewed-by: Russ Cox <rsc@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Fix#63955
parseIndVar, prove and maybe more are on the assumption that the loop header
is a single block. This can be wrong, ensure we don't match theses cases we
don't know how to handle.
In the future we could update them so that they know how to handle such cases
but theses cases seems rare so I don't think the value would be really high.
We could also run a loop canonicalization pass first which could handle this.
The repro case looks weird because I massaged it so it would crash with the
previous compiler.
Change-Id: I4aa8afae9e90a17fa1085832250fc1139c97faa6
Reviewed-on: https://go-review.googlesource.com/c/go/+/539977
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Move the range-over-function tests into range4.go.
Change-Id: Idccf30a0c7d7e8d2a17fb1c5561cf21e00506135
Reviewed-on: https://go-review.googlesource.com/c/go/+/539095
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Have nil checks return a pointer that is known non-nil. Users of
that pointer can use the result, ensuring that they are ordered
after the nil check itself.
The order dependence goes away after scheduling, when we've fixed
an order. At that point we move uses back to the original pointer
so it doesn't change regalloc any.
This prevents pointer arithmetic on nil from being spilled to the
stack and then observed by a stack scan.
Fixes#63657
Change-Id: I1a5fa4f2e6d9000d672792b4f90dfc1b7b67f6ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/537775
Reviewed-by: David Chase <drchase@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Keith Randall <khr@google.com>
The compiler is currently sign extending 32 bit signed integers to
64 bits before right shifting them using a 64 bit shift instruction.
There's no need to do this as RISC-V has instructions for right
shifting 32 bit signed values (sraw and sraiw) which sign extend
the result of the shift to 64 bits. Change the compiler so that
it uses sraw and sraiw for shifts of signed 32 bit integers reducing
in most cases the number of instructions needed to perform the shift.
Here are some examples of code sequences that are changed by this
patch:
int32(a) >> 2
before:
sll x5,x10,0x20
sra x10,x5,0x22
after:
sraw x10,x10,0x2
int32(v) >> int(s)
before:
sext.w x5,x10
sltiu x6,x11,64
add x6,x6,-1
or x6,x11,x6
sra x10,x5,x6
after:
sltiu x5,x11,32
add x5,x5,-1
or x5,x11,x5
sraw x10,x10,x5
int32(v) >> (int(s) & 31)
before:
sext.w x5,x10
and x6,x11,63
sra x10,x5,x6
after:
and x5,x11,31
sraw x10,x10,x5
int32(100) >> int(a)
before:
bltz x10,<target address calls runtime.panicshift>
sltiu x5,x10,64
add x5,x5,-1
or x5,x10,x5
li x6,100
sra x10,x6,x5
after:
bltz x10,<target address calls runtime.panicshift>
sltiu x5,x10,32
add x5,x5,-1
or x5,x10,x5
li x6,100
sraw x10,x6,x5
int32(v) >> (int(s) & 63)
before:
sext.w x5,x10
and x6,x11,63
sra x10,x5,x6
after:
and x5,x11,63
sltiu x6,x5,32
add x6,x6,-1
or x5,x5,x6
sraw x10,x10,x5
In most cases we eliminate one instruction. In the case where
we shift a int32 constant by a variable the number of instructions
generated is identical. A sra is simply replaced by a sraw. In the
unusual case where we shift right by a variable anded with a constant
> 31 but < 64, we generate two additional instructions. As this is
an unusual case we do not try to optimize for it.
Some improvements can be seen in some of the existing benchmarks,
notably in the utf8 package which performs right shifts of runes
which are signed 32 bit integers.
| utf8-old | utf8-new |
| sec/op | sec/op vs base |
EncodeASCIIRune-4 17.68n ± 0% 17.67n ± 0% ~ (p=0.312 n=10)
EncodeJapaneseRune-4 35.34n ± 0% 34.53n ± 1% -2.31% (p=0.000 n=10)
AppendASCIIRune-4 3.213n ± 0% 3.213n ± 0% ~ (p=0.318 n=10)
AppendJapaneseRune-4 36.14n ± 0% 35.35n ± 0% -2.19% (p=0.000 n=10)
DecodeASCIIRune-4 28.11n ± 0% 27.36n ± 0% -2.69% (p=0.000 n=10)
DecodeJapaneseRune-4 38.55n ± 0% 38.58n ± 0% ~ (p=0.612 n=10)
Change-Id: I60a91cbede9ce65597571c7b7dd9943eeb8d3cc2
Reviewed-on: https://go-review.googlesource.com/c/go/+/535115
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: M Zhuo <mzh@golangcn.org>
Reviewed-by: David Chase <drchase@google.com>
I will shortly be sending CLs to let the gofrontend code pass
these tests.
Change-Id: I53ccbdac3ac224a4fdc9577270f48136ca73a62c
Reviewed-on: https://go-review.googlesource.com/c/go/+/536537
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Most of the test cases in the test directory use the new go:build syntax
already. Convert the rest. In general, try to place the build constraint
line below the test directive comment in more places.
For #41184.
For #60268.
Change-Id: I11c41a0642a8a26dc2eda1406da908645bbc005b
Cq-Include-Trybots: luci.golang.try:gotip-linux-386-longtest,gotip-linux-amd64-longtest,gotip-windows-amd64-longtest
Reviewed-on: https://go-review.googlesource.com/c/go/+/536236
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Commit 061d77cb70 was published in parallel with another commit
36ecff0893 which changed how certain constants were generated.
Update the test to account for the changes.
Change-Id: I314b735a34857efa02392b7a0dd9fd634e4ee428
Reviewed-on: https://go-review.googlesource.com/c/go/+/536256
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Auto-Submit: Paul Murphy <murp@ibm.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
This is only supported power10/linux/PPC64. This generates smaller,
faster code by merging a pli + add into paddi.
Change-Id: I1f4d522fce53aea4c072713cc119a9e0d7065acc
Reviewed-on: https://go-review.googlesource.com/c/go/+/531717
Run-TryBot: Paul Murphy <murp@ibm.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
The funcdata is encoded as varint, with the upper limit set to 1e9.
However, the stack offsets could be up to 1<<30. Thus emitOpenDeferInfo
will trigger an ICE for function with large frame size.
By using binary.PutUvarint, the frame offset could be encoded correctly
for value larger than 1<<35, allow the compiler to report the error.
Further, the runtime also do validation when reading in the funcdata
value, so a bad offset won't likely cause mis-behavior.
Fixes#52697
Change-Id: I084c243c5d24c5d31cc22d5b439f0889e42b107c
Reviewed-on: https://go-review.googlesource.com/c/go/+/535077
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
In the PPC64 ISA, the instruction to do an 'and' operation
using an immediate constant is only available in the form that
also sets CR0 (i.e. clobbers the condition register.) This means
CR0 is being clobbered unnecessarily in many cases. That
affects some decisions made during some compiler passes
that check for it.
In those cases when the constant used by the ANDCC is a right
justified consecutive set of bits, a shift instruction can
be used which has the same effect if CR0 does not need to be
set. The rule to do that has been added to the late rules file
after other rules using ANDCCconst have been processed in the
main rules file.
Some codegen tests had to be updated since ANDCC is no
longer generated for some cases. A new test case was added to
verify the ANDCC is present if the results for both the AND
and CR0 are used.
Change-Id: I304f607c039a458e2d67d25351dd00aea72ba542
Reviewed-on: https://go-review.googlesource.com/c/go/+/531435
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Paul Murphy <murp@ibm.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Reviewed-by: Jayanth Krishnamurthy <jayanth.krishnamurthy@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
var p *[2]uint32 = ...
p[0] = 0
p[1] = 0
When we combine these two 32-bit stores into a single 64-bit store,
use the line number of the first store, not the second one.
This differs from the default behavior because usually with the combining
that the compiler does, we use the line number of the last instruction
in the combo (e.g. load+add, we use the line number of the add).
This is the same behavior that gcc does in C (picking the line
number of the first of a set of combined stores).
Change-Id: Ie70bf6151755322d33ecd50e4d9caf62f7881784
Reviewed-on: https://go-review.googlesource.com/c/go/+/521678
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
The immediate-data interface shortcuts also apply to pointer-shaped
things like maps, channels, and functions.
Fixes#63505.
Change-Id: I43982441bf523f53e9e5d183e95aea7c6655dd6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/534657
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Auto-Submit: David Chase <drchase@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Do this by removing all stores of zero-sized anything.
Fixes#63433.
Change-Id: I5d8271edab992d15d02005fa3fe31835f2eff8fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/534296
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
It is one less dependent load away, and right next to another
field in the itab we also load as part of the type switch or
type assert.
Change-Id: If7aaa7814c47bd79a6c7ed4232ece0bc1d63550e
Reviewed-on: https://go-review.googlesource.com/c/go/+/533117
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Before range over integer, types2 leaves constant expression in RHS of
non-constant shift untyped, so idealType do the validation to ensure
that constant value must be an int >= 0.
With range over int, the range expression can also be left untyped, and
can be an negative integer, causing the validation false.
Fixing this by relaxing the validation in idealType, and moving the
check to Unified IR reader.
Fixes#63378
Change-Id: I43042536c09afd98d52c5981adff5dbc5e7d882a
Reviewed-on: https://go-review.googlesource.com/c/go/+/532835
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Keith Randall <khr@golang.org>
This is the last of the getitab users to receive a cache.
We should now no longer see getitab (and callees) in profiles.
Hopefully.
Change-Id: I2ed72b9943095bbe8067c805da7f08e00706c98c
Reviewed-on: https://go-review.googlesource.com/c/go/+/531055
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 419456 starts using lookupObj to find types2.Object associated with
builtin functions. However, the new code does not un-parenthesized the
callee expression, causing an ICE because of nil obj returned.
Un-parenthesizing the callee expression fixes the problem.
Fixes#63436
Change-Id: Iebb4fbc08575e7d0b1dbd026c98e8f949ca16460
Reviewed-on: https://go-review.googlesource.com/c/go/+/533476
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Change-Id: If9089f8afd78de3e62cd575f642ff96ab69e2099
GitHub-Last-Rev: 14165018d6
GitHub-Pull-Request: golang/go#63386
Reviewed-on: https://go-review.googlesource.com/c/go/+/532895
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Jorropo <jorropo.pgm@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Auto-Submit: Michael Pratt <mpratt@google.com>
Convert expand calls into a smaller number of focused
recursive rewrites, and rely on an enhanced version of
"decompose" to clean up afterwards.
Debugging information seems to emerge intact.
Change-Id: Ic46da4207e3a4da5c8e2c47b637b0e35abbe56bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/507295
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
That way we don't need to call into the runtime for every
type assertion (to an interface type).
name old time/op new time/op delta
TypeAssert-24 3.78ns ± 3% 1.00ns ± 1% -73.53% (p=0.000 n=10+8)
Change-Id: I0ba308aaf0f24a5495b4e13c814d35af0c58bfde
Reviewed-on: https://go-review.googlesource.com/c/go/+/529316
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
That way we don't need to call into the runtime when the type being
switched on has been seen many times before.
The cache is just a hash table of a sample of all the concrete types
that have been switched on at that source location. We record the
matching case number and the resulting itab for each concrete input
type.
The caches seldom get large. The only two in a run of all.bash that
get more than 100 entries, even with the sampling rate set to 1, are
test/fixedbugs/issue29264.go, with 101
test/fixedbugs/issue29312.go, with 254
Both happen at the type switch in fmt.(*pp).handleMethods, perhaps
unsurprisingly.
name old time/op new time/op delta
SwitchInterfaceTypePredictable-24 25.8ns ± 2% 2.5ns ± 3% -90.43% (p=0.000 n=10+10)
SwitchInterfaceTypeUnpredictable-24 37.5ns ± 2% 11.2ns ± 1% -70.02% (p=0.000 n=10+10)
Change-Id: I4961ac9547b7f15b03be6f55cdcb972d176955eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/526658
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
For type switches where the targets are interface types,
call into the runtime once instead of doing a sequence
of assert* calls.
name old time/op new time/op delta
SwitchInterfaceTypePredictable-24 26.6ns ± 1% 25.8ns ± 2% -2.86% (p=0.000 n=10+10)
SwitchInterfaceTypeUnpredictable-24 39.3ns ± 1% 37.5ns ± 2% -4.57% (p=0.000 n=10+10)
Not super helpful by itself, but this code organization allows
followon CLs that add caching to the lookups.
Change-Id: I7967f85a99171faa6c2550690e311bea8b54b01c
Reviewed-on: https://go-review.googlesource.com/c/go/+/526657
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
The types2 typechecker already reported all invalid conversions required
by the Go language spec. However, the conversion involves go pragma is
not specified in the spec, so is not checked by types2.
Fixing this by handling the error gracefully during typecheck, just like
how old typechecker did before CL 394575.
Fixes#63333
Change-Id: I04c4121971c62d96f75ded1794ab4bdf3a6cd0ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/532515
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Add a new form of RLDC which maps directly to the ISA definition
of rldc: RLDC Rs, $sh, $mb, Ra. This is used to generate mask
constants described below.
Using MOVD $-1, Rx; RLDC Rx, $sh, $mb, Rx, any mask constant
can be generated. A mask is a contiguous series of 1 bits, which
may wrap.
Change-Id: Ifcaae1114080ad58b5fdaa3e5fc9019e2051f282
Reviewed-on: https://go-review.googlesource.com/c/go/+/531120
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Check for shifted 16b constants, and transform them to avoid the load
penalty. This should be much faster than loading, and reduce binary
size by reducing the constant pool size.
Change-Id: I6834e08be7ca88e3b77449d226d08d199db84299
Reviewed-on: https://go-review.googlesource.com/c/go/+/531119
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Change-Id: I8787458f9ccd3b5cdcdda820d8a45deb4f77eade
GitHub-Last-Rev: be865d67ef
GitHub-Pull-Request: golang/go#63165
Reviewed-on: https://go-review.googlesource.com/c/go/+/530120
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
This sequence can show up in the lowering pass on PPC64. If it
makes it to the latelower pass, it will cause an error because
it looks like it can be turned into RLDICL, but -1 isn't an
accepted mask.
Also, print more debug info if panic is called from
encodePPC64RotateMask.
Fixes#62698
Change-Id: I0f3322e2205357abe7fc28f96e05e3f7ad65567c
Reviewed-on: https://go-review.googlesource.com/c/go/+/529195
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Add compiler support for range over functions.
See the large comment at the top of
cmd/compile/internal/rangefunc/rewrite.go for details.
This is only reachable if GOEXPERIMENT=range is set,
because otherwise type checking will fail.
For proposal #61405 (but behind a GOEXPERIMENT).
For #61717.
Change-Id: I05717f94e63089c503acc49b28b47edeb4e011b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/510541
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
Add compiler implementation of range over integers.
This is only reachable if GOEXPERIMENT=range is set,
because otherwise type checking will fail.
For proposal #61405 (but behind a GOEXPERIMENT).
For #61717.
Change-Id: I4e35a73c5df1ac57f61ffb54033a433967e5be51
Reviewed-on: https://go-review.googlesource.com/c/go/+/510538
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
Add type-checking logic for range over integers and functions,
behind GOEXPERIMENT=range.
For proposal #61405 (but behind a GOEXPERIMENT).
For #61717.
Change-Id: Ibf78cf381798b450dbe05eb922df82af2b009403
Reviewed-on: https://go-review.googlesource.com/c/go/+/510537
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Auto-Submit: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
This patch changes the inliner to use callsite scores when deciding to
inline as opposed to looking only at callee cost/hairyness.
For this to work, we have to relax the inline budget cutoff as part of
CanInline to allow for the possibility that a given function might
start off with a cost of N where N > 80, but then be called from a
callsites whose score is less than 80. Once a given function F in
package P has been approved by CanInline (based on the relaxed budget)
it will then be emitted as part of the export data, meaning that other
packages importing P will need to also need to compute callsite scores
appropriately.
For a function F that calls function G, if G is marked as potentially
inlinable then the hairyness computation for F will use G's cost for
the call to G as opposed to the default call cost; for this to work
with the new scheme (given relaxed cost change described above) we
use G's cost only if it falls below inlineExtraCallCost, otherwise
just use inlineExtraCallCost.
Included in this patch are a bunch of skips and workarounds to
selected 'errorcheck' tests in the <GOROOT>/test directory to deal
with the additional "can inline" messages emitted when the new inliner
is turned on.
Change-Id: I9be5f8cd0cd8676beb4296faf80d2f6be7246335
Reviewed-on: https://go-review.googlesource.com/c/go/+/519197
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
There's several copies of this function. We only need one.
While here, normalize so that we always declare parameters, and always
use the names ~pNN for params and ~rNN for results.
Change-Id: I49e90d3fd1820f3c07936227ed5cfefd75d49a1c
Reviewed-on: https://go-review.googlesource.com/c/go/+/528415
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Than McIntosh <thanm@google.com>
sparse conditional constant propagation can discover optimization
opportunities that cannot be found by just combining constant folding
and constant propagation and dead code elimination separately.
This is a re-submit of PR#59575, which fix a broken dominance relationship caught by ssacheck
Updates https://github.com/golang/go/issues/59399
Change-Id: I57482dee38f8e80a610aed4f64295e60c38b7a47
GitHub-Last-Rev: 830016f24e
GitHub-Pull-Request: golang/go#60469
Reviewed-on: https://go-review.googlesource.com/c/go/+/498795
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Previously, the unified frontend implemented unsafe.Sizeof, etc that
involved derived types by constructing a normal OSIZEOF, etc
expression, including fully instantiating their argument. (When
unsafe.Sizeof is applied to a non-generic type, types2 handles
constant folding it.)
This worked, but involves unnecessary work, since all we really need
to track is the argument type (and the field selections, for
unsafe.Offsetof).
Further, the argument expression could generate temporary variables,
which would then go unused after typecheck replaced the OSIZEOF
expression with an OLITERAL. This results in compiler failures after
CL 523315, which made later passes stricter about expecting the
frontend to not construct unused temporaries.
Fixes#62515.
Change-Id: I37baed048fd2e35648c59243f66c97c24413aa94
Reviewed-on: https://go-review.googlesource.com/c/go/+/527097
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Currently, cmd/compile optimizes `var a = true; var b = a` into `var a
= true; var b = true`. But this may not be safe if we need to
initialize any other global variables between `a` and `b`, and the
initialization involves calling a user-defined function that reassigns
`a`.
This CL changes staticinit to keep track of the initialization
expressions that we've seen so far, and to stop applying the
staticcopy optimization once we've seen an initialization expression
that might have modified another global variable within this package.
To help identify affected initializers, this CL adds a -d=staticcopy
flag to warn when a staticcopy is suppressed and turned into a dynamic
copy.
Currently, `go build -gcflags=all=-d=staticcopy std` reports only four
instances:
```
encoding/xml/xml.go:1600:5: skipping static copy of HTMLEntity+0 with map[string]string{...}
encoding/xml/xml.go:1869:5: skipping static copy of HTMLAutoClose+0 with []string{...}
net/net.go:661:5: skipping static copy of .stmp_31+0 with poll.ErrNetClosing
net/http/transport.go:2566:5: skipping static copy of errRequestCanceled+0 with ~R0
```
Fixes#51913.
Change-Id: Iab41cf6f84c44f7f960e4e62c28a8aeaade4fbcf
Reviewed-on: https://go-review.googlesource.com/c/go/+/395541
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
When creating the struct type to hold variables captured by a function
literal, we currently reuse the captured variable names as fields.
However, there's no particular reason to do this: these struct types
aren't visible to users, and it adds extra complexity in making sure
fields belong to the correct packages.
Further, it turns out we were getting that subtly wrong. If two
function literals from different packages capture variables with
identical names starting with an uppercase letter (and in the same
order and with corresponding identical types) end up in the same
function (e.g., due to inlining), then we could end up creating
closure struct types that are "different" (i.e., not types.Identical)
yet end up with equal LinkString representations (which violates
LinkString's contract).
The easy fix is to just always use simple, exported, generated field
names in the struct. This should allow further struct reuse across
packages too, and shrink binary sizes slightly.
Fixes#62498.
Change-Id: I9c973f5087bf228649a8f74f7dc1522d84a26b51
Reviewed-on: https://go-review.googlesource.com/c/go/+/527135
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
One of the more tedious quirks of the original frontend (i.e.,
typecheck) to preserve was that it preserved the original
representation of constants into the backend. To fit into the unified
IR model, I ended up implementing a fairly heavyweight workaround:
simply record the original constant's string expression in the export
data, so that diagnostics could still report it back, and match the
old test expectations.
But now that there's just a single frontend to support, it's easy
enough to just update the test expectations and drop this support for
"raw" constant expressions.
Change-Id: I1d859c5109d679879d937a2b213e777fbddf4f2f
Reviewed-on: https://go-review.googlesource.com/c/go/+/526376
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Unfortunately, there isn't a single op that provides the resulting
computation.
At least, I couldn't find one.
Fixes#62469
Change-Id: I236f3965b827aaeb3d70ef9fe89be66b116494f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/526276
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Generate RLDIC[LR] instead of MOVD mask, Rx; AND Rx, Ry, Rz.
This helps reduce code size, and reduces the latency caused
by the constant load.
Similarly, for smaller-than-register values, truncate constants
which exceed the range of the value's type to avoid needing to
load a constant.
Change-Id: I6019684795eb8962d4fd6d9585d08b17c15e7d64
Reviewed-on: https://go-review.googlesource.com/c/go/+/515576
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
This reverts commit c1dfbf72e1.
Reason for revert: TESTL rule is wrong when the result is used for an ordered comparison.
Fixes#62360
Change-Id: I4d5b6aca24389b0a2bf767bfbc0a9d085359eb38
Reviewed-on: https://go-review.googlesource.com/c/go/+/524255
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Jakub Ciolek <jakub@ciolek.dev>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
In CL 522879, I moved the logic for setting Addrtaken from typecheck's
markAddrOf and ComputeAddrtaken directly into ir.NewAddrExpr. However,
I took the logic from markAddrOf, and failed to notice that
ComputeAddrtaken also set Addrtaken on the canonical ONAME.
The result is that if the only address-of expressions were within a
function literal, the canonical variable never got marked Addrtaken.
In turn, this could cause the consistency check in ir.Reassigned to
fail. (Yay for consistency checks turning mistakes into ICEs, rather
than miscompilation.)
Fixes#62313.
Change-Id: Ieab2854cd7fcc1b6c5d1e61de66453add9890a4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/523375
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Also gofmt a test file to make sure the parser works.
Fixes#62267.
Change-Id: I9b9f12b06bae7df626231000879b5ed7df3cd9ba
Reviewed-on: https://go-review.googlesource.com/c/go/+/522635
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
This test passes "-linkmode=external" to 'go run' to link the binary
using the system C linker.
CGO_ENABLED=0 explicitly tells cmd/go not to use the C toolchain,
so the test should not be run in that configuration.
Updates #46330.
Change-Id: I16ac66aac91178045f9decaeb28134061e9711f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/522495
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
In go.dev/cl/517775, I moved the frontend's deadcode elimination pass
into unified IR. But I also made a small enhancement: a branch like
"if x || true" is now detected as always taken, so the else branch can
be eliminated.
However, the inliner also has an optimization for delaying the
introduction of the result temporary variables when there's a single
return statement (added in go.dev/cl/266199). Consequently, the
inliner turns "if x || true { return true }; return true" into:
if x || true {
~R0 := true
goto .i0
}
.i0:
// code that uses ~R0
In turn, this confuses phi insertion, because it doesn't recognize
that the "if" statement is always taken, and so ~R0 will always be
initialized.
With this CL, after inlining we instead produce:
_ = x || true
~R0 := true
goto .i0
.i0:
Fixes#62211.
Change-Id: Ic8a12c9eb85833ee4e5d114f60e6c47817fce538
Reviewed-on: https://go-review.googlesource.com/c/go/+/522096
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
For large interface -> concrete type switches, we can use a jump
table on some bits of the type hash instead of a binary search on
the type hash.
name old time/op new time/op delta
SwitchTypePredictable-24 1.99ns ± 2% 1.78ns ± 5% -10.87% (p=0.000 n=10+10)
SwitchTypeUnpredictable-24 11.0ns ± 1% 9.1ns ± 2% -17.55% (p=0.000 n=7+9)
Change-Id: Ida4768e5d62c3ce1c2701288b72664aaa9e64259
Reviewed-on: https://go-review.googlesource.com/c/go/+/521497
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
This lets us combine more write barriers, getting rid of some of the
test+branch and gcWriteBarrier* calls.
With the new write barriers, it's easy to add a few non-pointer writes
to the set of values written.
We allow up to 2 non-pointer writes between pointer writes. This is enough
for, for example, adjacent slice fields.
Fixes#62126
Change-Id: I872d0fa9cc4eb855e270ffc0223b39fde1723c4b
Reviewed-on: https://go-review.googlesource.com/c/go/+/521498
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Currently, the types package has IsRuntimePkg and IsReflectPkg
predicates for testing if a Pkg is the runtime or reflect packages.
IsRuntimePkg returns "true" for any "CompilingRuntime" package, which
includes all of the packages imported by the runtime. This isn't
inherently wrong, except that all but one use of it is of the form "is
this Sym a specific runtime.X symbol?" for which we clearly only want
the package "runtime" itself. IsRuntimePkg was introduced (as
isRuntime) in CL 37538 as part of separating the real runtime package
from the compiler built-in fake runtime package. As of that CL, the
"runtime" package couldn't import any other packages, so this was
adequate at the time.
We could fix this by just changing the implementation of IsRuntimePkg,
but the meaning of this API is clearly somewhat ambiguous. Instead, we
replace it with a new RuntimeSymName function that returns the name of
a symbol if it's in package "runtime", or "" if not. This is what
every call site (except one) actually wants, which lets us simplify
the callers, and also more clearly addresses the ambiguity between
package "runtime" and the general concept of a runtime package.
IsReflectPkg doesn't have the same issue of ambiguity, but it
parallels IsRuntimePkg and is used in the same way, so we replace it
with a new ReflectSymName for consistency.
Change-Id: If3a81d7d11732a9ab2cac9488d17508415cfb597
Reviewed-on: https://go-review.googlesource.com/c/go/+/521696
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This CL adds FMADDS,FMSUBS,FNMADDS,FNMSUBS SSA support for riscv
Change-Id: I1e7dd322b46b9e0f4923dbba256303d69ed12066
Reviewed-on: https://go-review.googlesource.com/c/go/+/506616
Reviewed-by: Joel Sing <joel@sing.id.au>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: M Zhuo <mzh@golangcn.org>
There's no need for distinct hmap and hiter types for each map.
Shaves 9kB off cmd/go binary size.
Change-Id: I7bc3b2d8ec82e7fcd78c1cb17733ebd8b615990a
Reviewed-on: https://go-review.googlesource.com/c/go/+/521615
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
If we're not using the upper bits, don't bother issuing a
sign/zero extension operation.
For arm64, after CL 520916 which fixed a correctness bug with
extensions but as a side effect leaves many unnecessary ones
still in place.
Change-Id: I5f4fe4efbf2e9f80969ab5b9a6122fb812dc2ec0
Reviewed-on: https://go-review.googlesource.com/c/go/+/521496
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This CL implements the remainder of the zero-copy string->[]byte
conversion optimization initially attempted in go.dev/cl/520395, but
fixes the tracking of mutations due to ODEREF/ODOTPTR assignments, and
adds more comprehensive tests that I should have included originally.
However, this CL also keeps it behind the -d=zerocopy flag. The next
CL will enable it by default (for easier rollback).
Updates #2205.
Change-Id: Ic330260099ead27fc00e2680a59c6ff23cb63c2b
Reviewed-on: https://go-review.googlesource.com/c/go/+/520599
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This reverts CL 520395.
Reason for revert: thanm@ pointed out failure cases.
Change-Id: I3fd60b73118be3652be2c08b77ab39e793b42110
Reviewed-on: https://go-review.googlesource.com/c/go/+/520596
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
This CL enables the latent support for string->[]byte conversions
added go.dev/cl/520259.
One catch is that we need to make sure []byte("") evaluates to a
non-nil slice, even if "" is (nil, 0). This CL addresses that by
adding a "ptr != nil" check for OSTR2BYTESTMP, unless the NonNil flag
is set.
The existing uses of OSTR2BYTESTMP (which aren't concerned about
[]byte("") evaluating to nil) are updated to set this flag.
Fixes#2205.
Change-Id: I35a9cb16c164cd86156b7560915aba5108d8b523
Reviewed-on: https://go-review.googlesource.com/c/go/+/520395
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Currently, we rewrite:
go f(new(T))
into:
tmp := new(T)
go func() { f(tmp) }()
However, we can both shrink the closure and improve escape analysis by
instead rewriting it into:
go func() { f(new(T)) }()
This CL does that.
Change-Id: Iae16a476368da35123052ca9ff41c49159980458
Reviewed-on: https://go-review.googlesource.com/c/go/+/520340
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Normalizing go/defer statements to always use functions with zero
parameters and zero results was added to escape analysis, because that
was the earliest point at which all three frontends converged. Now
that we only have the unified frontend, we can do it during typecheck,
which is where we perform all other desugaring and normalization
rewrites.
Change-Id: Iebf7679b117fd78b1dffee2974bbf85ebc923b23
Reviewed-on: https://go-review.googlesource.com/c/go/+/520260
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
I previously used a clumsy hack to copy Closgen back and forth while
inlining, to handle when an inlined function contains closures, which
need to each be uniquely numbered.
The real solution was to name the closures using r.inlCaller, rather
than r.curfn. This CL adds a helper method to do exactly this.
Change-Id: I510553b5d7a8f6581ea1d21604e834fd6338cb06
Reviewed-on: https://go-review.googlesource.com/c/go/+/520339
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This CL extends escape analysis in two ways.
First, we already optimize directly called closures. For example,
given:
var x int // already stack allocated today
p := func() *int { return &x }()
we don't need to move x to the heap, because we can statically track
where &x flows. This CL extends the same idea to work for indirectly
called closures too, as long as we know everywhere that they're
called. For example:
var x int // stack allocated after this CL
f := func() *int { return &x }
p := f()
This will allow a subsequent CL to move the generation of go/defer
wrappers earlier.
Second, this CL adds tracking to detect when pointer values flow to
the pointee operand of an indirect assignment statement (i.e., flows
to p in "*p = x") or to builtins that modify memory (append, copy,
clear). This isn't utilized in the current CL, but a subsequent CL
will make use of it to better optimize string->[]byte conversions.
Updates #2205.
Change-Id: I610f9c531e135129c947684833e288ce64406f35
Reviewed-on: https://go-review.googlesource.com/c/go/+/520259
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
For aggregate-typed arguments passed to a call, expandCalls
decomposed them into parts in the same block where the value
was created. This is not necessarily the call block, and in
the case where stores are involved, can change the memory
leaving that block, and getting that right is problematic.
Instead, do all the expanding in the same block as the call,
which avoids the problems of (1) not being able to reorder
loads/stores across a block boundary to conform to memory
order and (2) (incorrectly, not) exposing the new memory to
consumers in other blocks. Putting it all in the same block
as the call allows reordering, and the call creates its own
new memory (which is already dealt with correctly).
Fixes#61992.
Change-Id: Icc7918f0d2dd3c480cc7f496cdcd78edeca7f297
Reviewed-on: https://go-review.googlesource.com/c/go/+/519276
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Open-coded defer slots are assigned indices upfront, so they're
logically like elements in an array. Without reassigning the indices,
we need to keep all of the elements alive so their relative offsets
are correct.
Fixes#61895.
Change-Id: Ie0191fdb33276f4e8ed0becb69086524fff022b2
Reviewed-on: https://go-review.googlesource.com/c/go/+/517856
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 497276 added optimization for len(string([]byte)) by avoiding call to
slicebytetostring. However, the bytes to string expression may contain
init nodes, which need to be preserved. Otherwise, it would make the
liveness analysis confusing about the lifetime of temporary variables
created by init nodes.
Fixes#61778
Change-Id: I6d1280a7d61bcc75f11132af41bda086f084ab54
Reviewed-on: https://go-review.googlesource.com/c/go/+/516375
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Stop using BTSconst and friends when ORLconst can be used instead.
OR can be issued by more function units than BTS can, so it could
lead to better IPC. OR might take a few more bytes to encode, but
not a lot more.
Still use BTSconst for cases where the constant otherwise wouldn't
fit and would require a separate movabs instruction to materialize
the constant. This happens when setting bits 31-63 of 64-bit targets.
Add BTS-to-memory operations so we don't need to load/bts/store.
Fixes#61694
Change-Id: I00379608df8fb0167cb01466e97d11dec7c1596c
Reviewed-on: https://go-review.googlesource.com/c/go/+/515755
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Fixes#61629
This reduce the pressure on regalloc because then the loop only keep alive
one value (the iterator) instead of the iterator and the upper bound since
the comparison now acts against an immediate, often zero which can be skipped.
This optimize things like:
for i := 0; i < n; i++ {
Or a range over a slice where the index is not used:
for _, v := range someSlice {
Or the new range over int from #61405:
for range n {
It is hit in 975 unique places while doing ./make.bash.
Change-Id: I5facff8b267a0b60ea3c1b9a58c4d74cdb38f03f
Reviewed-on: https://go-review.googlesource.com/c/go/+/512935
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Jorropo <jorropo.pgm@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
s==s is always true for strings. This comes up in NaN testing in
generic code, where we want x==x to compile completely away except for
float types.
Fixes#60777
Change-Id: I3ce054b5121354de2f9751b010fb409f148cb637
Reviewed-on: https://go-review.googlesource.com/c/go/+/503795
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
If we load 2 values and then store those 2 loaded values, we can likely
perform that operation with a single wider load and store.
Fixes#60709
Change-Id: Ifc5f92c2f1b174c6ed82a69070f16cec6853c770
Reviewed-on: https://go-review.googlesource.com/c/go/+/502295
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
The compiler/assembler's -S output prints relocation type
numerically, which is hard to understand. Every time I need to
count the relocation type constants to figure out which relocation
it actually is. Print the symbolic name instead.
Change-Id: I4866873bbae8b3dc0ee212609cb00280f9164243
Reviewed-on: https://go-review.googlesource.com/c/go/+/501856
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
(ANDCCconst [y] (MOV.*reg x)) should only be merged when zero
extending. Otherwise, sign bits are lost on negative values.
(ANDCCconst [0xFF] (MOVBreg x)) should be simplified to a zero
extension of x. Likewise for the MOVHreg variant.
Fixes#61297
Change-Id: I04e4fd7dc6a826e870681f37506620d48393698b
Reviewed-on: https://go-review.googlesource.com/c/go/+/508775
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Paul Murphy <murp@ibm.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
User code is unlikely to be correct, but don't crash the compiler
when the offset of a pointer in an object is not a multiple of the
pointer size.
Fixes#61187
Change-Id: Ie56bfcb38556c5dd6f702ae4ec1d4534c6acd420
Reviewed-on: https://go-review.googlesource.com/c/go/+/508555
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
According to RISCV manual 11.6:
FMADD x,y,z computes x*y+z and
FNMADD x,y,z => -x*y-z
FMSUB x,y,z => x*y-z
FNMSUB x,y,z => -x*y+z respectively
However our implement of SSA convert FMADD -x,y,z to FNMADD x,y,z which
is wrong and should be convert to FNMSUB according to manual.
Change-Id: Ib297bc83824e121fd7dda171ed56ea9694a4e575
Reviewed-on: https://go-review.googlesource.com/c/go/+/506575
Run-TryBot: M Zhuo <mzh@golangcn.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Joedian Reid <joedian@golang.org>
Reviewed-by: Michael Munday <mike.munday@lowrisc.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
The large-function phi placement algorithm evidently doesn't like the
same pseudo-variable being used to represent expressions of varying
types.
Instead, use the same tactic as used for "valVar" (ssa.go:6585--6587),
which is to just generate a fresh marker node each time.
Maybe we could just use the OMIN/OMAX nodes themselves as the key
(like we do for OANDAND/OOROR), but that just seems needlessly risky
for negligible memory savings. Using fresh marker values each time
seems obviously safe by comparison.
Fixes#61041.
Change-Id: Ie2600c9c37b599c2e26ae01f5f8a433025d7fd08
Reviewed-on: https://go-review.googlesource.com/c/go/+/506679
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
For float or string, min/max builtin performs a runtime call, so we need
to save its result to temporary variable. Otherwise, the runtime call
will clobber closure's arguments currently on the stack when passing
min/max as argument to closures.
Fixes#60990
Change-Id: I1397800f815ec7853182868678d0f760b22afff2
Reviewed-on: https://go-review.googlesource.com/c/go/+/506115
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Our large-function phi placement algorithm is incompatible with phi
opcodes already existing in the SSA representation. Instead, use simple
variable assignments and have the phi placement algorithm place the phis
we need for min/max.
Turns out the small-function phi placement algorithm doesn't have this
sensitivity, so this bug only occurs in large functions (>500 basic blocks).
Maybe we should document/check that no phis are present when we start
phi placement (regardless of size). Leaving for a potential separate CL.
We should probably also fix the placement algorithm to handle existing
phis correctly. But this CL is probably a lot smaller/safer than
messing with phi placement.
Fixes#60982
Change-Id: I59ba7f506c72b22bc1485099a335d96315ebef67
Reviewed-on: https://go-review.googlesource.com/c/go/+/505756
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
CL 410344 fixed missing method value wrapper, by visiting body of
wrapper function after applying inlining pass.
CL 492017 allow more inlining of functions that construct closures,
which ends up making the wrapper function now inlineable, but can
contain closure nodes that couldn't be inlined. These closures body may
contain OMETHVALUE nodes that we never seen, thus we need to scan
closures body for finding them.
Fixes#60945
Change-Id: Ia1e31420bb172ff87d7321d2da2989ef23e6ebb6
Reviewed-on: https://go-review.googlesource.com/c/go/+/505255
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Change-Id: Idd872c5b90dbca564ed8a37bb3683e642142ae63
Reviewed-on: https://go-review.googlesource.com/c/go/+/505015
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Currently ArenaNew expects the type passed in to be a *T and it returns
a *T. This does not match the function's documentation.
Since this is an experiment, change ArenaNew to match the documentation.
This more closely aligns ArenaNew with arena.New. (Takes a type T,
returns a *T value.)
Note that this is a breaking change. However, as far as pkg.go.dev can
tell, there's exactly one package using it in the open source world.
Also, add smoke test for the exported API, which is just a wrapper
around the internal API. Clearly there's enough room for error here that
it should be tested, but we don't need thorough tests at this layer
because that already exists in the runtime. We just need to make sure it
basically works.
Fixes#60528.
Change-Id: I673cc4609378380ef80648b0c2eb2928e73f49c9
Reviewed-on: https://go-review.googlesource.com/c/go/+/501860
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
types2 have already errored about any spec-required overflows, and
division by zero. CL 469595 unintentionally fixed typecheck not to error
about overflows, but zero division is still be checked during tcArith.
This causes unsafe operations with variable size failed to compile,
instead of raising runtime error.
Fixes#60601
Change-Id: I7bea2821099556835c920713397f7c5d8a4025ac
Reviewed-on: https://go-review.googlesource.com/c/go/+/501735
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Don't use the line number of the argument itself, as that may be from
arbitrarily earlier in the function.
Fixes#60673
Change-Id: Ifc0a2aaae221a256be3a4b0b2e04849bae4b79d7
Reviewed-on: https://go-review.googlesource.com/c/go/+/502656
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@google.com>
CL 496257 adds min/max builtins, which may appear as argument to a
function call, so it will be tested by mayCall. But those ops are not
handled by mayCall, causes the compiler crashes.
Fixes#60582
Change-Id: I729f10bf62b4aad39ffcb1433f576e74d09fdd9a
Reviewed-on: https://go-review.googlesource.com/c/go/+/500575
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
HAUTO should be handled the same way as other stack offsets for
adding to constant pool. Add the missing cases.
Fixes#57955.
Change-Id: If7fc82cafb2bbf0a6121e73e353b8825cb36b5bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/463138
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Some testdir tests fail if GOEXPERIMENT=cgocheck2 is set. Fix this by
skipping these tests.
Change-Id: I58d4ef0cceb86bcf93220b4a44de9b9dc4879b16
Reviewed-on: https://go-review.googlesource.com/c/go/+/499675
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Two interface types that are assignable don't have to be identical;
specifically, if they are defined types, they can be different
defined types. If those defined types specify type parameters which
are never used, do not infer a type argument based on the instantiation
of a matching defined type.
Adjusted three existing tests where we inferred type arguments incorrectly.
Fixes#60377.
Change-Id: I91fb207235424b3cbc42b5fd93eee619e7541cb7
Reviewed-on: https://go-review.googlesource.com/c/go/+/498315
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
sparse conditional constant propagation can discover optimization opportunities that cannot be found by just combining constant folding and constant propagation and dead code elimination separately.
Updates #59399
Change-Id: Ia954e906480654a6f0cc065d75b5912f96f36b2e
GitHub-Last-Rev: 90fc02db99
GitHub-Pull-Request: golang/go#59575
Reviewed-on: https://go-review.googlesource.com/c/go/+/483875
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
CL 415241 and CL 411935 break tests into unified/nounified variants, for
compatibility with old frontend while developing unified IR. Now the old
frontend was gone, so moving those tests back to the original files.
Change-Id: Iecdcd4e6ee33c723f6ac02189b0be26248e15f0f
Reviewed-on: https://go-review.googlesource.com/c/go/+/497275
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
In Go 1.17, cmd/compile gained the ability to inline calls to
functions that contain function literals (aka "closures"). This was
implemented by duplicating the function literal body and emitting a
second LSym, because in general it might be optimized better than the
original function literal.
However, the second LSym was named simply as any other function
literal appearing literally in the enclosing function would be named.
E.g., if f has a closure "f.funcX", and f is inlined into g, we would
create "g.funcY" (N.B., X and Y need not be the same.). Users then
have no idea this function originally came from f.
With this CL, the inlined call stack is incorporated into the clone
LSym's name: instead of "g.funcY", it's named "g.f.funcY".
In the future, it seems desirable to arrange for the clone's name to
appear exactly as the original name, so stack traces remain the same
as when -l or -d=inlfuncswithclosures are used. But it's unclear
whether the linker supports that today, or whether any downstream
tooling would be confused by this.
Updates #60324.
Change-Id: Ifad0ccef7e959e72005beeecdfffd872f63982f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/497137
Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Retrying the original CL with a small modification. The original CL
did not handle the case of reading an itab out of a dictionary
correctly. When we read an itab out of a dictionary, we must treat
the type inside that itab as maybe being put in an interface.
Original CL: 486895
Revert CL: 490156
Change-Id: Id2dc1699d184cd8c63dac83986a70b60b4e6cbd7
Reviewed-on: https://go-review.googlesource.com/c/go/+/491495
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This enables the implementation for proposal #58671, which is
a likely accept. By enabling it early we get a bit extra soak
time for this feature. The change can be reverted trivially, if
need be.
For #58671.
Change-Id: Id6c27515e45ff79f4f1d2fc1706f3f672ccdd1ab
Reviewed-on: https://go-review.googlesource.com/c/go/+/495955
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In the types1 universe, we only need to represent value types. For
interfaces, this means we only need to worry about pure interfaces. A
pure interface can embed a union type, but the overall union must be
equivalent to "any".
In go.dev/cl/458619, we changed the types1 reader to return "any", but
to incorporate a consistency check to make sure this is valid.
Unfortunately, a pure interface can actually still reference impure
interfaces, and in general this is hard to check precisely without
reimplementing a lot of types2 data structures and logic into types1.
We haven't had any other reports of this check failing since 1.20, so
it seems simplest to just suppress for now.
Fixes#60117.
Change-Id: I5053faafe2d1068c6d438b2193347546bf5330cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/495455
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Be more liberal about expanding the OR tree. Handle any tree shape
instead of a fully left or right associative tree.
Also remove tail feature, it isn't ever needed.
Change-Id: If16bebef94b952a604d6069e9be3d9129994cb6f
Reviewed-on: https://go-review.googlesource.com/c/go/+/494056
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ryan Berger <ryanbberger@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
[This is a roll-forward of CL 458755, which was reverted due to make.bash
being broken on GOAMD64=v3. But it turned out that the problem was caused
by wrong bswap/load rewrite rules, and it was fixed in CL 492616.]
This CL enhances the tighten pass. Previously if a value has memory arg,
then the tighten pass won't move it, actually if the memory state is
consistent among definition and use block, we can move the value. This
CL optimizes this case. This is useful for the following situation:
b1:
x = load(...mem)
if(...) goto b2 else b3
b2:
use(x)
b3:
some_op_not_use_x
For the micro-benchmark mentioned in #56620, the performance improvement
is about 15%.
There's no noticeable performance change in the go1 benchmark.
Fixes#56620
Change-Id: I36ea68bed384986cd3ae81cb9e6efe84bb213adc
Reviewed-on: https://go-review.googlesource.com/c/go/+/492895
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Eric Fang <eric.fang@arm.com>
This modifies some existing rules to allow more prefixed instructions
to be generated when using GOPPC64=power10. Some rules also check
if PCRel is available, which is currently supported for linux/ppc64le
and linux/ppc64 (internal linking only).
Prior to p10, DS-offset loads and stores had a 16 bit size limit for
the offset field. If the offset of the data for load or store was
beyond this range then an indexed load or store would be selected by
the rules.
In p10 the assembler can generate prefixed instructions in this case,
but does not if an indexed instruction was selected during the lowering
pass.
This allows many more cases to use prefixed loads or stores, reducing
function sizes and improving performance in some cases where the code
change happens in key loops.
For example in strconv BenchmarkAppendQuoteRune before:
12c5e4: 15 00 10 06 pla r10,1425660
12c5e8: fc c0 40 39
12c5ec: 00 00 6a e8 ld r3,0(r10)
12c5f0: 10 00 aa e8 ld r5,16(r10)
After this change:
12a828: 15 00 10 04 pld r3,1433272
12a82c: b8 de 60 e4
12a830: 15 00 10 04 pld r5,1433280
12a834: c0 de a0 e4
Performs better in the second case.
A testcase was added to verify that the rules correctly select a load or
store based on the offset and whether power10 or earlier.
Change-Id: I4335fed0bd9b8aba8a4f84d69b89f819cc464846
Reviewed-on: https://go-review.googlesource.com/c/go/+/477398
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Archana Ravindar <aravind5@in.ibm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Paul Murphy <murp@ibm.com>
With CL 408826 reflect.Value does not always escape. We need to
make sure Value operations does (or does not) escape the Value
correctly. This CL adds a test.
There are still a few unfortunate cases, where some Value
operations escape more than necessary (comparing to a non-reflect
version of the code), but hard to fix. These are mostly that a
Value would escape conditionally (mostly on the type of the Value),
but currently we don't have a good way to express that.
Change-Id: I9fdfc7584670aa09c5a01f6b2803f2043aaddb65
Reviewed-on: https://go-review.googlesource.com/c/go/+/441938
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Types are either static (for compiler-created types) or heap
allocated and always reachable (for reflection-created types, held
in the central map). So there is no need to escape types.
With CL 408826 reflect.Value does not always escape. Some functions
that escapes Value.typ would make the Value escape without this CL.
Had to add a special case for the inliner to keep (*Value).Type
still inlineable.
Change-Id: I7c14d35fd26328347b509a06eb5bd1534d40775f
Reviewed-on: https://go-review.googlesource.com/c/go/+/413474
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The effect and motivation is for the test to be selected when doing
'go test cmd' and not when doing 'go test std' since it's primarily
about testing the Go compiler and linker. Other than that, it's run
by all.bash and 'go test std cmd' as before.
For #56844.
Fixes#60059.
Change-Id: I2d499af013f9d9b8761fdf4573f8d27d80c1fccf
Reviewed-on: https://go-review.googlesource.com/c/go/+/493876
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Russ added test/bench/go1 in CL 5484071 to have a stable suite of
programs to use as benchmarks. For the compiler and runtime we had
back then, those were reasonable benchmarks, but the compiler and
runtime are now far more sophisticated and these benchmarks no longer
have good coverage. We also now have better benchmark suites
maintained outside the repo (e.g., golang.org/x/benchmarks). Keeping
test/bench/go1 at this point is actively misleading.
Indirectly related to #37486, as this also removes the last package
dist test runs outside of src/.
Change-Id: I2867ef303fe48a02acce58ace4ee682add8acdbf
Reviewed-on: https://go-review.googlesource.com/c/go/+/494193
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
The test directory driver currently sets the GOOS/GOARCH environment
variables if they aren't set. This appears to be in service of a
single test, test/env.go, which was introduced in September 2008 along
with os.Getenv. It's not entirely clear what that test is even trying
to check, since runtime.GOOS isn't necessarily the same as $GOOS. We
keep the test around because golang.org/x/tools/go/ssa/interp uses it
as a test case, but we simplify the test and eliminate the need for
the driver to set GOOS/GOARCH.
Change-Id: I5acc0093b557c95d1f0a526d031210256a68222d
Reviewed-on: https://go-review.googlesource.com/c/go/+/493601
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Adds rules that rewrites statements such as ~P&~Q as ~(P|Q) and ~P|~Q as ~(P&Q), removing an extraneous instruction.
Change-Id: Icedb97df741680ddf9799df79df78657173aa500
GitHub-Last-Rev: f22e2350c9
GitHub-Pull-Request: golang/go#60018
Reviewed-on: https://go-review.googlesource.com/c/go/+/493175
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Stefan M <st3f4nm4d4@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Thanks to the recent addition of the memcombine pass, the
ppc64 ports now have the memcombine optimizations. Previously
in PPC64.rules, the memcombine rules were only added for
ppc64le targets due to the significant increase in size of
the rewritePPC64.go file when those rules were added. The
ppc64 and ppc64le rules had to be different because of the
byte order due to endianness differences.
This enables the memcombine tests to be run on ppc64 as well
as ppc64le.
Change-Id: I4081e2d94617a1b66541d536c0c2662e266c9c1e
Reviewed-on: https://go-review.googlesource.com/c/go/+/492615
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Lynn Boger <laboger@linux.vnet.ibm.com>
[This is a roll-forward of CL 479095, which was reverted due to a bad
interaction between inlining and escape analysis, then later fixed
first with an attempt in CL 482355, then again in CL 484859, and then
one more time with CL 492135.]
Currently, when the inliner is determining if a function is
inlineable, it descends into the bodies of closures constructed by
that function. This has several unfortunate consequences:
- If the closure contains a disallowed operation (e.g., a defer), then
the outer function can't be inlined. It makes sense that the
*closure* can't be inlined in this case, but it doesn't make sense
to punish the function that constructs the closure.
- The hairiness of the closure counts against the inlining budget of
the outer function. Since we currently copy the closure body when
inlining the outer function, this makes sense from the perspective
of export data size and binary size, but ultimately doesn't make
much sense from the perspective of what should be inlineable.
- Since the inliner walks into every closure created by an outer
function in addition to starting a walk at every closure, this adds
an n^2 factor to inlinability analysis.
This CL simply drops this behavior.
In std, this makes 57 more functions inlinable, and disallows inlining
for 10 (due to the basic instability of our bottom-up inlining
approach), for an net increase of 47 inlinable functions (+0.6%).
This will help significantly with the performance of the functions to
be added for #56102, which have a somewhat complicated nesting of
closures with a performance-critical fast path.
The downside of this seems to be a potential increase in export data
and text size, but the practical impact of this seems to be
negligible:
│ before │ after │
│ bytes │ bytes vs base │
Go/binary 15.12Mi ± 0% 15.14Mi ± 0% +0.16% (n=1)
Go/text 5.220Mi ± 0% 5.237Mi ± 0% +0.32% (n=1)
Compile/binary 22.92Mi ± 0% 22.94Mi ± 0% +0.07% (n=1)
Compile/text 8.428Mi ± 0% 8.435Mi ± 0% +0.08% (n=1)
Change-Id: I5f75fcceb177f05853996b75184a486528eafe96
Reviewed-on: https://go-review.googlesource.com/c/go/+/492017
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
If the function referenced by a closure expression is incorporated
into a static init, be sure to mark it as non-hidden, since otherwise
it will be live but no longer reachable from the init func, hence it
will be skipped during escape analysis, which can lead to
miscompilations.
Fixes#59680.
Change-Id: Ib858aee296efcc0b7655d25c23ab8a6a8dbdc5f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/492135
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
[This is a roll-forward of CL 484859, this time including a fix for
issue #59709. The call to do dead function marking was taking place in
the wrong spot, causing it to run more than once if generics were
instantiated.]
This patch generalizes the code in the inliner that marks unreferenced
hidden closure functions as dead. Rather than doing the marking on the
fly (previous approach), this new approach does a single pass at the
end of inlining, which catches more dead functions.
Change-Id: I0e079ad755c21295477201acbd7e1a732a98fffd
Reviewed-on: https://go-review.googlesource.com/c/go/+/492016
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Previously, type arguments could only be inferred for generic
functions in call expressions, whereas with the reverse type inference
proposal they can now be inferred in assignment contexts too. As a
consequence, we now need to check Info.Instances to find the inferred
type for more cases now.
Updates #59338.
Fixes#59955.
Change-Id: I9b6465395869459c2387d0424febe7337b28b90e
Reviewed-on: https://go-review.googlesource.com/c/go/+/492455
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
This CL enhances the tighten pass. Previously if a value has memory arg,
then the tighten pass won't move it, actually if the memory state is
consistent among definition and use block, we can move the value. This
CL optimizes this case. This is useful for the following situation:
b1:
x = load(...mem)
if(...) goto b2 else b3
b2:
use(x)
b3:
some_op_not_use_x
For the micro-benchmark mentioned in #56620, the performance improvement
is about 15%.
There's no noticeable performance change in the go1 benchmark.
Fixes#56620
Change-Id: I9b152754f27231f583a6995fc7cd8472aa7d390c
Reviewed-on: https://go-review.googlesource.com/c/go/+/458755
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Put zero-sized data symbols at same address as runtime.zerobase,
so zero-sized global variables have the same address as zero-sized
allocations.
Change-Id: Ib3145dc1b663a9794dfabc0e6abd2384960f2c49
Reviewed-on: https://go-review.googlesource.com/c/go/+/490435
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The current definitions of StackLimit and StackGuard only indirectly
specify the NOSPLIT stack limit and duplicate a literal constant
(928). Currently, they define the stack guard delta, and from there
compute the NOSPLIT limit.
Rationalize these by defining a new constant, abi.StackNosplitBase,
which consolidates and directly specifies the NOSPLIT stack limit (in
the default case). From this we then compute the stack guard delta,
inverting the relationship between these two constants. While we're
here, we rename StackLimit to StackNosplit to make it clearer what's
being limited.
This change does not affect the values of these constants in the
default configuration. It does slightly change how
StackGuardMultiplier values other than 1 affect the constants, but
this multiplier is a pretty rough heuristic anyway.
before after
stackNosplit 800 800
_StackGuard 928 928
stackNosplit -race 1728 1600
_StackGuard -race 1856 1728
For #59670.
Change-Id: Ia94094c5e47897e7c088d24b4a5e33f5c2768db5
Reviewed-on: https://go-review.googlesource.com/c/go/+/486976
Auto-Submit: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This reverts commit CL 486380.
Submitted out of order and breaks bootstrap.
Change-Id: I67bd225094b5c9713b97f70feba04d2c99b7da76
Reviewed-on: https://go-review.googlesource.com/c/go/+/486916
Reviewed-by: David Chase <drchase@google.com>
TryBot-Bypass: Austin Clements <austin@google.com>
The current definitions of StackLimit and StackGuard only indirectly
specify the NOSPLIT stack limit and duplicate a literal constant
(928). Currently, they define the stack guard delta, and from there
compute the NOSPLIT limit.
Rationalize these by defining a new constant, abi.StackNosplitBase,
which consolidates and directly specifies the NOSPLIT stack limit (in
the default case). From this we then compute the stack guard delta,
inverting the relationship between these two constants. While we're
here, we rename StackLimit to StackNosplit to make it clearer what's
being limited.
This change does not affect the values of these constants in the
default configuration. It does slightly change how
StackGuardMultiplier values other than 1 affect the constants, but
this multiplier is a pretty rough heuristic anyway.
before after
stackNosplit 800 800
_StackGuard 928 928
stackNosplit -race 1728 1600
_StackGuard -race 1856 1728
For #59670.
Change-Id: Ibe20825ebe0076bbd7b0b7501177b16c9dbcb79e
Reviewed-on: https://go-review.googlesource.com/c/go/+/486380
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Marking variables in erroneous variable declarations as used is
convenient for tests but doesn't necessarily hide follow-on errors
in real code: either the variable is not supposed to be declared in
the first place and then we should get an error if it is not used,
or it is there because it is intended to be used, and the we expect
an error it if is not used.
This brings types2 closer to go/types.
Change-Id: If7ee1298fc770f7ad0cefe7e968533fd50ec2343
Reviewed-on: https://go-review.googlesource.com/c/go/+/486175
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Add more rules to ensure that order doesn't matter.
Add memequal 0 rule.
Try to use a constant argument to memequal when one is available.
Fixes#59684
Change-Id: I36e85ffbd949396ed700ed6e8ec2bc3ae013f5d2
Reviewed-on: https://go-review.googlesource.com/c/go/+/485535
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This reverts commit http://go.dev/cl//484859
Reason for revert: causes linker errors in a number of google-internal tests.
Change-Id: I322252f784a46d2b1d447ebcdca86ce14bc0cc91
Reviewed-on: https://go-review.googlesource.com/c/go/+/485755
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
[This is a roll-forward of CL 479095, which was reverted due to a bad
interaction between inlining and escape analysis, then later fixed
fist with an attempt in CL 482355, then again in 484859 .]
Currently, when the inliner is determining if a function is
inlineable, it descends into the bodies of closures constructed by
that function. This has several unfortunate consequences:
- If the closure contains a disallowed operation (e.g., a defer), then
the outer function can't be inlined. It makes sense that the
*closure* can't be inlined in this case, but it doesn't make sense
to punish the function that constructs the closure.
- The hairiness of the closure counts against the inlining budget of
the outer function. Since we currently copy the closure body when
inlining the outer function, this makes sense from the perspective
of export data size and binary size, but ultimately doesn't make
much sense from the perspective of what should be inlineable.
- Since the inliner walks into every closure created by an outer
function in addition to starting a walk at every closure, this adds
an n^2 factor to inlinability analysis.
This CL simply drops this behavior.
In std, this makes 57 more functions inlinable, and disallows inlining
for 10 (due to the basic instability of our bottom-up inlining
approach), for an net increase of 47 inlinable functions (+0.6%).
This will help significantly with the performance of the functions to
be added for #56102, which have a somewhat complicated nesting of
closures with a performance-critical fast path.
The downside of this seems to be a potential increase in export data
and text size, but the practical impact of this seems to be
negligible:
│ before │ after │
│ bytes │ bytes vs base │
Go/binary 15.12Mi ± 0% 15.14Mi ± 0% +0.16% (n=1)
Go/text 5.220Mi ± 0% 5.237Mi ± 0% +0.32% (n=1)
Compile/binary 22.92Mi ± 0% 22.94Mi ± 0% +0.07% (n=1)
Compile/text 8.428Mi ± 0% 8.435Mi ± 0% +0.08% (n=1)
Updates #56102.
Change-Id: I6e938d596992ffb473cf51e7e598f372ce08deb0
Reviewed-on: https://go-review.googlesource.com/c/go/+/484860
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This patch generalizes the code in the inliner that marks unreferenced
hidden closure functions as dead. Rather than doing the marking on the
fly (previous approach), this new approach does a single pass at the
end of inlining, which catches more dead functions.
Fixes#59638.
Updates #59404.
Updates #59547.
Change-Id: I54fd63e9e37c9123b08a3e7def7d1989919bba91
Reviewed-on: https://go-review.googlesource.com/c/go/+/484859
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 399694 added constant-fold switch early in compilation. So function:
func f() string {
switch intSize {
case 32:
return "32"
case 64:
return "64"
default:
panic("unreachable")
}
}
will be constant-fold to:
func f() string {
switch intSize {
case 64:
return "64"
}
}
When this function get inlined, there is a check whether we can delay
declaring the result parameter until the "return" statement. For the
original function, we can't delay the result, because there's more than
one return statement. However, the constant-fold one can, because
there's on one return statement in the body now. The result parameter
~R0 ends up declaring inside the switch statement scope.
Now, when walking the switch statement, it's re-written into if-else
statement. Without typecheck.EvalConst, the if condition "if 64 == 64"
is passed as-is to the ssa generation pass. Because "64 == 64" is not a
constant, the ssagen creates normal blocks for branching the results.
This confuses the liveness analysis, because ~R0 is only live inside the
if block. With typecheck.EvalConst, "64 == 64" is evaluated to "true",
so ssagen can branch the result without emitting conditional blocks.
Instead, the constant-fold can be re-written as:
switch {
case true:
// Body
}
So it does not depend on the delay results check during inlining. Adding
a test, which will fail when typecheck.EvalConst is removed, so we can
do the cleanup without breaking things.
Change-Id: I638730bb147140de84260653741431b807ff2f15
Reviewed-on: https://go-review.googlesource.com/c/go/+/484316
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Static init inliner is using typecheck.EvalConst to handle string
concatenation expressions. But static init inliner may reveal constant
expressions after substitution, and the compiler needs to evaluate those
expressions in non-constant semantic. Using typecheck.EvalConst, which
always evaluates expressions in constant semantic, is not the right
choice.
For safety, this CL fold the logic to handle string concatenation to
static init inliner, so there won't be regression in handling constant
expressions in non-constant semantic. And also, future CL can simplify
typecheck.EvalConst logic.
Updates #58293
Updates #58339Fixes#58439
Change-Id: I74068d99c245938e576afe9460cbd2b39677bbff
Reviewed-on: https://go-review.googlesource.com/c/go/+/466277
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
(This is a retry of CL 462035 which was reverted at 474976.
The only change from that CL is the aix fix SRODATA->SNOPTRDATA
at inittask.go:141)
As described here:
https://github.com/golang/go/issues/31636#issuecomment-493271830
"Find the lexically earliest package that is not initialized yet,
but has had all its dependencies initialized, initialize that package,
and repeat."
Simplify the runtime a bit, by just computing the ordering required
in the linker and giving a list to the runtime.
Update #31636Fixes#57411
RELNOTE=yes
Change-Id: I28c09451d6aa677d7394c179d23c2c02c503fc56
Reviewed-on: https://go-review.googlesource.com/c/go/+/478916
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This reverts commit http://go.dev/cl/c/482356.
Reason for revert: Reverting this change again, since it is causing additional failures in google-internal testing.
Change-Id: I9234946f62e5bb18c2f873a65e8b298d04af0809
Reviewed-on: https://go-review.googlesource.com/c/go/+/484735
Reviewed-by: Florian Zenker <floriank@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Auto-Submit: Than McIntosh <thanm@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Range statement will mutate the key and value, so we should treat them as reassigned.
Fixes#59572
Change-Id: I9c6b67d938760a0c6a1d9739f2737c67af4a3a10
Reviewed-on: https://go-review.googlesource.com/c/go/+/483855
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Fixes#58141
Co-authored-by: Richard Musiol <neelance@gmail.com>
Co-authored-by: Achille Roussel <achille.roussel@gmail.com>
Co-authored-by: Julien Fabre <ju.pryz@gmail.com>
Co-authored-by: Evan Phoenix <evan@phx.io>
Change-Id: I49b66946acc90fdf09ed9223096bfec9a1e5b923
Reviewed-on: https://go-review.googlesource.com/c/go/+/479627
Run-TryBot: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Bypass: Ian Lance Taylor <iant@golang.org>
For now, only apply the rule if either of arguments are constants. That
would catch a lot of real user code, without slowing down the compiler
with code generated for string comparison (experience in CL 410336).
Updates #57959Fixes#45928
Change-Id: Ie2e830d6d0d71cda3947818b22c2775bd94f7971
Reviewed-on: https://go-review.googlesource.com/c/go/+/483359
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
So iterators that are in progress can know entries have been deleted and
terminate the iterator properly.
Update #55002
Update #56351Fixes#59411
Change-Id: I924f16a00fe4ed6564f730a677348a6011d3fb67
Reviewed-on: https://go-review.googlesource.com/c/go/+/481935
Reviewed-by: Keith Randall <khr@golang.org>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Use the type of the store for the byteswap, not the type of the
store's value argument.
Normally when we're storing a 16-bit value, the value being stored is
also typed as 16 bits. But sometimes it is typed as something smaller,
usually because it is the result of an upcast from a smaller value,
and that upcast needs no instructions.
If the type of the store's arg is thinner than the type being stored,
and the byteswap'd value uses that thinner type, and the byteswap'd
value needs to be spilled & restored, that spill/restore happens using
the thinner type, which causes us to lose some of the top bits of the
value.
Fixes#59367
Change-Id: If6ce1e8a76f18bf8e9d79871b6caa438bc3cce4d
Reviewed-on: https://go-review.googlesource.com/c/go/+/481395
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
[This is a roll-forward of CL 479095, which was reverted due to a bad
interaction between inlining and escape analysis since fixed in CL 482355.]
Currently, when the inliner is determining if a function is
inlineable, it descends into the bodies of closures constructed by
that function. This has several unfortunate consequences:
- If the closure contains a disallowed operation (e.g., a defer), then
the outer function can't be inlined. It makes sense that the
*closure* can't be inlined in this case, but it doesn't make sense
to punish the function that constructs the closure.
- The hairiness of the closure counts against the inlining budget of
the outer function. Since we currently copy the closure body when
inlining the outer function, this makes sense from the perspective
of export data size and binary size, but ultimately doesn't make
much sense from the perspective of what should be inlineable.
- Since the inliner walks into every closure created by an outer
function in addition to starting a walk at every closure, this adds
an n^2 factor to inlinability analysis.
This CL simply drops this behavior.
In std, this makes 57 more functions inlinable, and disallows inlining
for 10 (due to the basic instability of our bottom-up inlining
approach), for an net increase of 47 inlinable functions (+0.6%).
This will help significantly with the performance of the functions to
be added for #56102, which have a somewhat complicated nesting of
closures with a performance-critical fast path.
The downside of this seems to be a potential increase in export data
and text size, but the practical impact of this seems to be
negligible:
│ before │ after │
│ bytes │ bytes vs base │
Go/binary 15.12Mi ± 0% 15.14Mi ± 0% +0.16% (n=1)
Go/text 5.220Mi ± 0% 5.237Mi ± 0% +0.32% (n=1)
Compile/binary 22.92Mi ± 0% 22.94Mi ± 0% +0.07% (n=1)
Compile/text 8.428Mi ± 0% 8.435Mi ± 0% +0.08% (n=1)
Updates #56102.
Change-Id: I1f4fc96c71609c8feb59fecdb92b69ba7e3b5b41
Reviewed-on: https://go-review.googlesource.com/c/go/+/482356
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
When a closure is inlined, it may contain other hidden closures, which
the inliner will duplicate, rendering the original nested closures as
unreachable. Because they are unreachable, they don't get processed in
escape analysis, meaning that go/defer statements don't get rewritten,
which can then in turn trigger errors in walk. This patch looks for
nested hidden closures and marks them as dead, so that they can be
skipped later on in the compilation flow. NB: if during escape
analysis we rediscover a hidden closure (due to an explicit reference)
that was previously marked dead, revive it at that point.
Fixes#59404.
Change-Id: I76db1e9cf1ee38bd1147aeae823f916dbbbf081b
Reviewed-on: https://go-review.googlesource.com/c/go/+/482355
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Currently, the prove pass can get knowledge from some specific logic
operators only before the CFG is explored, which means that the bounds
information of the branch will be ignored.
This CL updates the facts table by the logic operators in every
branch. Combined with the branch information, this will be helpful for
BCE in some circumstances.
Fixes#57243
Change-Id: I0bd164f1b47804ccfc37879abe9788740b016fd5
Reviewed-on: https://go-review.googlesource.com/c/go/+/419555
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Eric Fang <eric.fang@arm.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Unified IR already records the correct type for them.
Fixes#59378
Change-Id: I275c45b48f67bde55c8e2079d60b5868d0acde7f
Reviewed-on: https://go-review.googlesource.com/c/go/+/481555
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Casting to a *uintptr is not ok if there isn't at least 8 bytes of
data backing that pointer (on 64-bit archs).
So although we end up making a slice of 0 length with that pointer,
the cast itself doesn't know that.
Instead, bail early if the result is going to be 0 length.
Fixes#59334
Change-Id: Id3c0e09d341d838835c0382cccfb0f71dc3dc7e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/480575
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Currently, when the inliner is determining if a function is
inlineable, it descends into the bodies of closures constructed by
that function. This has several unfortunate consequences:
- If the closure contains a disallowed operation (e.g., a defer), then
the outer function can't be inlined. It makes sense that the
*closure* can't be inlined in this case, but it doesn't make sense
to punish the function that constructs the closure.
- The hairiness of the closure counts against the inlining budget of
the outer function. Since we currently copy the closure body when
inlining the outer function, this makes sense from the perspective
of export data size and binary size, but ultimately doesn't make
much sense from the perspective of what should be inlineable.
- Since the inliner walks into every closure created by an outer
function in addition to starting a walk at every closure, this adds
an n^2 factor to inlinability analysis.
This CL simply drops this behavior.
In std, this makes 57 more functions inlinable, and disallows inlining
for 10 (due to the basic instability of our bottom-up inlining
approach), for an net increase of 47 inlinable functions (+0.6%).
This will help significantly with the performance of the functions to
be added for #56102, which have a somewhat complicated nesting of
closures with a performance-critical fast path.
The downside of this seems to be a potential increase in export data
and text size, but the practical impact of this seems to be
negligible:
│ before │ after │
│ bytes │ bytes vs base │
Go/binary 15.12Mi ± 0% 15.14Mi ± 0% +0.16% (n=1)
Go/text 5.220Mi ± 0% 5.237Mi ± 0% +0.32% (n=1)
Compile/binary 22.92Mi ± 0% 22.94Mi ± 0% +0.07% (n=1)
Compile/text 8.428Mi ± 0% 8.435Mi ± 0% +0.08% (n=1)
Change-Id: Ie9e38104fed5689a94c368288653fd7cb4b7a35e
Reviewed-on: https://go-review.googlesource.com/c/go/+/479095
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
The cast is proceeded by a bounds check. If the bounds check passes
then we know the pointer in the slice is non-nil.
... except casts to pointers of 0-sized arrays. They are strange, as
the bounds check can pass for a nil input.
Change-Id: Ic01cf4a82d59fbe3071d4b271c94efca9cafaec1
Reviewed-on: https://go-review.googlesource.com/c/go/+/479335
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Keith Randall <khr@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Change the Checker.use/useLHS functions to report if all "used"
expressions evaluated without error. Use that information to
control whether to report an assignment mismatch error or not.
This will reduce the number of errors reported per assignment,
where the assignment mismatch is only one of the errors.
Change-Id: Ia0fc3203253b002e4e1d5759d8d5644999af6884
Reviewed-on: https://go-review.googlesource.com/c/go/+/478756
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
For #55242
Change-Id: I092b1881623ea997b178d038c0afd10cd5bca937
Reviewed-on: https://go-review.googlesource.com/c/go/+/479898
Reviewed-by: Than McIntosh <thanm@google.com>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
unsafe.SliceData can return pointers which are nil. That function gets
lowered to the SSA OpSlicePtr, which the compiler assumes is non-nil.
This used to be the case as OpSlicePtr was only used in situations
where the bounds check already passed. But with unsafe.SliceData that
is no longer the case.
There are situations where we know it is nil. Use Bounded() to
indicate that.
I looked through all the uses of OSPTR and added SetBounded where it
made sense. Most OSPTR results are passed directly to runtime calls
(e.g. memmove), so even if we know they are non-nil that info isn't
helpful.
Fixes#59293
Change-Id: I437a15330db48e0082acfb1f89caf8c56723fc51
Reviewed-on: https://go-review.googlesource.com/c/go/+/479896
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
As with changes in prior CLs, we don't suppress legitimate
"declared but not used" errors anymore simply because the
respective variables are used in incorrect assignments,
unrelated to the variables in question.
Adjust several (ancient) tests accordingly.
Change-Id: I5826393264d9d8085c64777a330d4efeb735dd2d
Reviewed-on: https://go-review.googlesource.com/c/go/+/478716
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
This CL re-introduces useLHS because we don't want to suppress
correct "declared but not used" errors for variables that only
appear on the LHS of an assignment (using Checker.use would mark
them as used).
This CL also adjusts a couple of places where types2 differed
from go/types (and suppressed valid "declared and not used"
errors). Now those errors are surfaced. Adjusted a handful of
tests accordingly.
Change-Id: Ia555139a05049887aeeec9e5221b1f41432c1a57
Reviewed-on: https://go-review.googlesource.com/c/go/+/478635
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Don't say "array length must be integer" if it is in fact an integer.
Fixes#59209
Change-Id: If60b93a0418f5837ac334412d3838eec25eeb855
Reviewed-on: https://go-review.googlesource.com/c/go/+/479115
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In the Sizes API, recognize an overflow (to a negative value) as a
consequence of an oversize value, and specify as such in the API.
Adjust the various size computations to take overflow into account.
Recognize a negative size or offset as an error and report it rather
than panicking.
Use the same protocol for results provided by the default (StdSizes)
and external Sizes implementations.
Add a new error code TypeTooLarge for the new errors.
Fixes#59190.
Fixes#59207.
Change-Id: I8c33a9e69932760275100112dde627289ac7695b
Reviewed-on: https://go-review.googlesource.com/c/go/+/478919
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Under the right conditions we can optimize cmp comparisons to cmn
comparisons, such as:
func foo(a, b int) int {
var c int
if a + b < 0 {
c = 1
}
return c
}
Previously it's compiled as:
ADD R1, R0, R1
CMP $0, R1
CSET LT, R0
With this CL it's compiled as:
CMN R1, R0
CSET MI, R0
Here we need to pay attention to the overflow situation of a+b, the MI
flag means N==1, which doesn't honor the overflow flag V, its value
depends only on the sign of the result. So it has the same semantic of
the Go code, so it's correct.
Similarly, this CL also optimizes the case of >= comparison
using the PL conditional flag.
Change-Id: I47179faba5b30cca84ea69bafa2ad5241bf6dfba
Reviewed-on: https://go-review.googlesource.com/c/go/+/476116
Run-TryBot: Eric Fang <eric.fang@arm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
For #59169
Change-Id: Id72ad9fe8b6e1d7cf64f972520ae8858f70c025a
Reviewed-on: https://go-review.googlesource.com/c/go/+/478217
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
Add the following common local transformations
(t + x) - (t + y) == x - y
(t + x) - (y + t) == x - y
(x + t) - (y + t) == x - y
(x + t) - (t + y) == x - y
(x - t) + (t + y) == x + y
(x - t) + (y + t) == x + y
The compiler itself matches such patterns many times. This also aligns with other popular compilers.
Fixes#59111
Change-Id: Ibdfdb414782f8fcaa20b84ac5d43d0d9ae2c7b60
GitHub-Last-Rev: 1aad82e62e
GitHub-Pull-Request: golang/go#59119
Reviewed-on: https://go-review.googlesource.com/c/go/+/477555
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
This CL add support for instrinsifying the TrialingZeros{8,32,64}
functions for 386 architecture. We need handle the case when the input
is 0, which could lead to undefined output from the BSFL instruction.
Next CL will remove the assembly code in runtime/internal/sys package.
Change-Id: Ic168edf68e81bf69a536102100fdd3f56f0f4a1b
Reviewed-on: https://go-review.googlesource.com/c/go/+/475735
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
