We already do this for floor/ceil, but RoundToEven was added later.
Intrinsify it also.
name old time/op new time/op delta
RoundToEven-8 3.00ns ± 1% 0.68ns ± 2% -77.34% (p=0.000 n=10+10)
Change-Id: Ib158cbceb436c6725b2d9353a526c5c4be19bcad
Reviewed-on: https://go-review.googlesource.com/74852
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
Reviewed-by: Keith Randall <khr@golang.org>
The comment on invalid time values in Constants and example
refers to _ zero padding when it should refer to space padding.
Change-Id: I5784356e389d324703e20eec6203f147db92880f
Reviewed-on: https://go-review.googlesource.com/75410
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The ztypes_windows* file names indicate that these are auto-generated
but they aren't. Rename them to types_windows* to avoid this confusion.
This follows CL 52950 which did the same for golang.org/x/sys.
Change-Id: Ia557ec5d4bcfb6bae20e34e71b5f3f190285794f
Reviewed-on: https://go-review.googlesource.com/75390
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The only file that really changed is
x/net/idna (upstream 8253218a).
See CL 73730: avoid memory leak in validation codes
The rest is just a small change in the
generation line at the top.
Change-Id: I62c5172f77f63d919c41d11c6db0a9517bc2a221
Reviewed-on: https://go-review.googlesource.com/74953
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Handle make(map[any]any) and make(map[any]any, hint) where
hint <= BUCKETSIZE special to allow for faster map initialization
and to improve binary size by using runtime calls with fewer arguments.
Given hint is smaller or equal to BUCKETSIZE in which case
overLoadFactor(hint, 0) is false and no buckets would be allocated by makemap:
* If hmap needs to be allocated on the stack then only hmap's hash0
field needs to be initialized and no call to makemap is needed.
* If hmap needs to be allocated on the heap then a new special
makehmap function will allocate hmap and intialize hmap's
hash0 field.
Reduces size of the godoc by ~36kb.
AMD64
name old time/op new time/op delta
NewEmptyMap 16.6ns ± 2% 5.5ns ± 2% -66.72% (p=0.000 n=10+10)
NewSmallMap 64.8ns ± 1% 56.5ns ± 1% -12.75% (p=0.000 n=9+10)
Updates #6853
Change-Id: I624e90da6775afaa061178e95db8aca674f44e9b
Reviewed-on: https://go-review.googlesource.com/61190
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Current AllowedOpCodes is 1024, which is not enough for modern x86.
Changed limit to 2048 (though AVX512 will exceed this).
Additional Z-cases and ytab tables are added to make it possible
to handle missing AVX1 and AVX2 instructions.
This CL is required by x86avxgen to work properly:
https://go-review.googlesource.com/c/arch/+/66972
Change-Id: I290214bbda554d2cba53349f50dcd34014fe4cee
Reviewed-on: https://go-review.googlesource.com/70650
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
Add support for ADX cpuid bit detection and all instructions,
implied by that bit (ADOX/ADCX). They are useful for rsa and math/big in
general.
Change-Id: Idaa93303ead48fd18b9b3da09b3e79de2f7e2193
Reviewed-on: https://go-review.googlesource.com/74850
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The comment currently implies that a zero will be added, but the
underscore is used to add a space for single-digit dates.
Change-Id: Ib3bac8a16bc2d1fcb26ab3bb7ad172b89e1a4a24
Reviewed-on: https://go-review.googlesource.com/75230
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Since CL 33071, testCPUProfile is only one user of the badOS map.
Replace it by the corresponding switch, with the "plan9" case removed
because it is already checked earlier in the same function.
Change-Id: Id647b8ee1fd37516bb702b35b3c9296a4f56b61b
Reviewed-on: https://go-review.googlesource.com/75110
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If GODEBUG=gocacheverify=1, then instead of using the cache to
avoid computations, the go command will do the computations and
double-check that they match any existing cache entries.
This is handled entirely in the cache implementation; there's no
complexity added to any of the cache usage sites.
(As of this CL there aren't any cache usage sites, but soon there will be.)
Also change GOCMDDEBUGHASH to the more usual GODEBUG=gocachehash=1.
Change-Id: I574f181e06b5299b1d9c6d402e40c57a0e064e74
Reviewed-on: https://go-review.googlesource.com/75294
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This lets users see the effective GOCACHE setting.
Change-Id: I0b6dd2945d54611be89ed68fe2fd99110b9a25f6
Reviewed-on: https://go-review.googlesource.com/75293
Reviewed-by: David Crawshaw <crawshaw@golang.org>
These are convenience function for small cached items.
Change-Id: Iba92b7826a9fd6979e627687f2ce72d4b4799385
Reviewed-on: https://go-review.googlesource.com/75292
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Use a build cache separate from the default user cache,
one that will be wiped out during startup, so that make.bash
continues to start from a clean slate.
Change-Id: I38733991015c66efb89fc170c71701b1dd9de28d
Reviewed-on: https://go-review.googlesource.com/75291
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This makes ImportDir("$GOROOT/src/math", 0)
and Import("math", "", 0) equivalent. It was an
oversight that they were not before.
An upcoming change to the go command relies on
the two returning the same results.
Change-Id: I187da4830fae85f8dde673c22836ff2da6801047
Reviewed-on: https://go-review.googlesource.com/75290
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The cache is stored in $GOCACHE, which is printed by go env and
defaults to a subdirectory named "go-build" in the standard user cache
directory for the host operating system.
This CL only implements the cache. Future CLs will store data in it.
Change-Id: I0b4965a9e50f852e17e44ec3d6dafe05b58f0d22
Reviewed-on: https://go-review.googlesource.com/68116
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
At the end of type-checking a function or closure, unused local variables
are reported by looking at all variables in the function scope and its
nested children scopes. If a nested scope belonged to a nested function
(closure), that scope would be searched twice, leading to multiple error
messages for unused variables.
This CL introduces an internal-only marker to identify function scopes
so that they can be ignored where needed.
Fixes#22524.
Change-Id: If58cc17b2f0615a16f33ea262f50dffd0e86d0f0
Reviewed-on: https://go-review.googlesource.com/75251
Reviewed-by: Alan Donovan <adonovan@google.com>
Mac OS X 10.13 introduced APFS which stores nanosecond resolution
timestamps. The implementation of os.Stat already returns full
resolution timestamps, but os.Chtimes only sets timestamps with
microsecond resolution.
Fix this by using setattrlist on Darwin, which takes a struct timeval
with nanosecond resolution. This is what Mac OS X 10.13 appears uses
to implement utimensat, according to dtruss.
Fixes#22528
Change-Id: I397dabef6b2b73a081382999aa4c4405ab8c6015
Reviewed-on: https://go-review.googlesource.com/74952
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The marshal method allows the hash's internal state to be serialized and
unmarshaled at a later time, without having the re-write the entire stream
of data that was already written to the hash.
Fixes#20573
Change-Id: I40bbb84702ac4b7c5662f99bf943cdf4081203e5
Reviewed-on: https://go-review.googlesource.com/66710
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Whitespace is ignored in bool values and attrs. It is convenient and
relatively safe since whitespace around a bool value is often
unimportant. The same logic can be applied to numeric values of types
int, uint, and float.
Fixes#22146
Change-Id: Ie0462def90304af144b8e2e72d85b644857c27cc
Reviewed-on: https://go-review.googlesource.com/73891
Reviewed-by: Sam Whited <sam@samwhited.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Sam Whited <sam@samwhited.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Whitespace is ignored in bool values and attrs, but there are no tests
capturing this behavior.
Change-Id: I7a7249de4886f510869e91de937e69b83c3254c8
Reviewed-on: https://go-review.googlesource.com/73890
Reviewed-by: Sam Whited <sam@samwhited.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Sam Whited <sam@samwhited.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also replaces verbs for error message from %s to %v. In general, low
level IO APIs return an error value containing non-string types and
there's no guarantee that all the types implement fmt.Stringer
interface.
Change-Id: I8a6e2a80d5c721c772a83b9556bac16556eaa771
Reviewed-on: https://go-review.googlesource.com/73931
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In CL 50510, the Content-Type header started to be set in Redirect when
request method is GET. (Prior to that, it wasn't set at all, which is
what said CL was fixing.) However, according to HTTP specification,
the expected response for a HEAD request is identical to that of a
GET request, but without the response body.
This CL updates the behavior to set the Content-Type header for HEAD
method in addition to GET.
This actually allows a simpler implementation than before. This change
largely reverts CL 50510, and applies the simpler implementation.
Add a test for Content-Type header and body for GET, HEAD requests.
Updates CL 50510.
Change-Id: If33ea3f4bbc5246bb5dc751458004828cfe681b9
Reviewed-on: https://go-review.googlesource.com/65190
Run-TryBot: Dmitri Shuralyov <shurcool@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Tom Bergan <tombergan@google.com>
It is easy to miss the documentation information that no arguments
in the Notify function means that the Notify will catch all possible signals.
So the example was added with explicit comment above the Notify usage.
Fixes#22257
Change-Id: Ia6a16dd4a419f7c77d89020ca5db85979b5b474e
Reviewed-on: https://go-review.googlesource.com/74730
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The counter part, writeInt in cmd/internal/obj, writes int64s.
So the reader side should also read int64s. This may cause a
larger range of values being accepted, some of which should
not be that large. This is probably ok: for example, for
size/index/length, the very large value (due to corruption)
may be well past the end and causes other errors. And we did
not do much bound check anyway.
One exmaple where this matters is ARM32's object file. For one
type of relocation it encodes the instruction into Reloc.Add
field (which itself may be problematic and worth fix) and the
instruction encoding overflows int32, causing ARM32 object
file being rejected by goobj (and so objdump and nm) before.
Unskip ARM32 object file tests in goobj, nm, and objdump.
Updates #19811.
Change-Id: Ia46c2b68df5f1c5204d6509ceab6416ad6372315
Reviewed-on: https://go-review.googlesource.com/69010
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
An initial draft of the Newton code for Float.Sqrt was structured like
this:
for condition
// do Newton iteration..
prec *= 2
since prec, at the end of the loop, was double the precision used in
the last Newton iteration, the termination condition was set to
2*limit. The code was later rewritten in the form
for condition
prec *= 2
// do Newton iteration..
but condition was not updated, and it's still 2*limit, which is about
double what we actually need, and is triggering the execution of an
additional, and unnecessary, Newton iteration.
This change adjusts the Newton termination condition to the (correct)
value of z.prec, plus 32 guard bits as a safety margin.
name old time/op new time/op delta
FloatSqrt/64-4 798ns ± 3% 802ns ± 3% ~ (p=0.458 n=8+8)
FloatSqrt/128-4 1.65µs ± 1% 1.65µs ± 1% ~ (p=0.290 n=8+8)
FloatSqrt/256-4 3.10µs ± 1% 2.10µs ± 0% -32.32% (p=0.000 n=8+7)
FloatSqrt/1000-4 8.83µs ± 1% 4.91µs ± 2% -44.39% (p=0.000 n=8+8)
FloatSqrt/10000-4 107µs ± 1% 40µs ± 1% -62.68% (p=0.000 n=8+8)
FloatSqrt/100000-4 2.91ms ± 1% 0.96ms ± 1% -67.13% (p=0.000 n=8+8)
FloatSqrt/1000000-4 240ms ± 1% 80ms ± 1% -66.66% (p=0.000 n=8+8)
name old alloc/op new alloc/op delta
FloatSqrt/64-4 416B ± 0% 416B ± 0% ~ (all equal)
FloatSqrt/128-4 720B ± 0% 720B ± 0% ~ (all equal)
FloatSqrt/256-4 1.34kB ± 0% 0.82kB ± 0% -39.29% (p=0.000 n=8+8)
FloatSqrt/1000-4 5.09kB ± 0% 2.50kB ± 0% -50.94% (p=0.000 n=8+8)
FloatSqrt/10000-4 45.9kB ± 0% 23.5kB ± 0% -48.81% (p=0.000 n=8+8)
FloatSqrt/100000-4 533kB ± 0% 251kB ± 0% -52.90% (p=0.000 n=8+8)
FloatSqrt/1000000-4 9.21MB ± 0% 4.61MB ± 0% -49.98% (p=0.000 n=8+8)
name old allocs/op new allocs/op delta
FloatSqrt/64-4 9.00 ± 0% 9.00 ± 0% ~ (all equal)
FloatSqrt/128-4 13.0 ± 0% 13.0 ± 0% ~ (all equal)
FloatSqrt/256-4 15.0 ± 0% 12.0 ± 0% -20.00% (p=0.000 n=8+8)
FloatSqrt/1000-4 24.0 ± 0% 19.0 ± 0% -20.83% (p=0.000 n=8+8)
FloatSqrt/10000-4 40.0 ± 0% 35.0 ± 0% -12.50% (p=0.000 n=8+8)
FloatSqrt/100000-4 66.0 ± 0% 55.0 ± 0% -16.67% (p=0.000 n=8+8)
FloatSqrt/1000000-4 143 ± 0% 122 ± 0% -14.69% (p=0.000 n=8+8)
Change-Id: I4868adb7f8960f2ca20e7792734c2e6211669fc0
Reviewed-on: https://go-review.googlesource.com/75010
Reviewed-by: Robert Griesemer <gri@golang.org>
Recurse into structs/arrays of one element when
assigning names.
Test incorporated into existing end-to-end debugger test,
hand-verified that it fails without this CL.
Fixes#19868
Revives CL 40010
Old-Change-Id: I0266e58af975fb64cfa17922be383b70f0a7ea96
Change-Id: I122ac2375931477769ec8d763607c1ec42d78a7f
Reviewed-on: https://go-review.googlesource.com/71731
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Dsymutil, an utility used on macOS when externally linking executables,
does not support base address selector entries in debug_ranges.
To work around this deficiency this commit removes base address
selectors from debug_ranges and emits instead a list composed only of
compile unit relative addresses.
A new type of relocation is introduced, R_ADDRCUOFF, similar to
R_ADDROFF, that relocates an address to its offset from the low_pc of
the symbol's compile unit.
Fixes#21945
Change-Id: Ie991f9bc1afda2b49ac5d734eb41c37d3a37e554
Reviewed-on: https://go-review.googlesource.com/72371
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
After this CL, "go vet" can be guaranteed to have complete type information
about the packages being checked, even if cgo or swig is in use,
which will in turn make it reasonable for vet checks to insist on type
information. It also fixes vet's understanding of unusual import paths
like relative paths and vendored packages.
For now "go tool vet" will continue to cope without type information,
but the eventual plan is for "go tool vet" to query the go command for
what it needs, and also to be able to query alternate build systems
like bazel. But that's future work.
Fixes#4889.
Fixes#12556 (if not already fixed).
Fixes#15182.
Fixes#16086.
Fixes#17571.
Change-Id: I932626ee7da649b302cd269b82eb6fe5d7b9f0f2
Reviewed-on: https://go-review.googlesource.com/74750
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL adds support for accepting package config from
the go command. Paired with CL 74356 this lets us make
sure vet has complete information about package sources.
This fixes many issues (see CL 74356 for the list), including
mishandling of cgo and vendoring.
Change-Id: Ia4a1dce6f9b1b0a8ef5fdf9005a20a8b294969f1
Reviewed-on: https://go-review.googlesource.com/74355
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Also, support spaces in go binaries locations, and document
GOROOT_BOOTSTRAP at the top.
Change-Id: I643d22df57aad9a2200cc256edd20e8c811bc70d
Reviewed-on: https://go-review.googlesource.com/74951
Run-TryBot: Filippo Valsorda <hi@filippo.io>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The check of uintptr(newcap) > maxSliceCap(et.size) in addition
to capmem > _MaxMem is needed to prevent a reproducible overflow
on 32bit architectures.
On 64bit platforms this problem is less likely to occur as allocation
of a sufficiently large array or slice to be append is likely to
already exhaust available memory before the call to append can be made.
Example program that without the fix in this CL does segfault on 386:
type T [1<<27 + 1]int64
var d T
var s []T
func main() {
s = append(s, d, d, d, d)
print(len(s), "\n")
}
Fixes#21586
Change-Id: Ib4185435826ef43df71ba0f789e19f5bf9a347e6
Reviewed-on: https://go-review.googlesource.com/55133
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
testing.Skip{,f} will exit the test via runtime.Goexit. Thus, the
successive return is never reached and can be removed.
Change-Id: I1e399f3d5db753ece1ffba648850427e1b4be300
Reviewed-on: https://go-review.googlesource.com/74990
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
commentText is only called if g != nil in ParseGo, so the check inside
commentText is redundant and can be deleted.
Change-Id: I130c18b738527c96bc59950b354a50b9e23f92e9
Reviewed-on: https://go-review.googlesource.com/74871
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is basically a mini-bootstrap, to reach a fixed point.
Change-Id: I88abad3d3ac961c3d11a48cb64d625d458684ef7
Reviewed-on: https://go-review.googlesource.com/74792
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Otherwise the new numbered directories like b028/ appear in the objects,
and they can change from run to run.
Fixes#22514.
Change-Id: I8d0cf65f3622e48b2547d5757febe0ee1301e2ed
Reviewed-on: https://go-review.googlesource.com/74791
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This makes 'go install cmd/compile' in one directory produce
a different binary from running it in another directory,
which is problematic for reproducible builds.
Change-Id: If26685d2e45d2695413b472142b49694716575fa
Reviewed-on: https://go-review.googlesource.com/74790
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
When a SyntaxError occurs, report the current offset within the stream.
The code already accounted for the offset within the current buffer
being scanned. By including how much data was already scanned, the
current offset can be computed.
Fixes#22478
Change-Id: I91ecd4cad0b85a5c1556bc597f3ee914e769af01
Reviewed-on: https://go-review.googlesource.com/74251
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
