Fixes#37595
Change-Id: I83e5f6105748a0a9238322a4f7ec4b0bbf61a263
Reviewed-on: https://go-review.googlesource.com/c/go/+/348394
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Daniel Martí <mvdan@mvdan.cc>
Trust: Cherry Mui <cherryyz@google.com>
ticks might be same after tick division, although the real cputicks
is linear growth
Fixes#46737
Change-Id: I1d98866fbf21b426c6c1c96cc9cf802d7f440f18
Reviewed-on: https://go-review.googlesource.com/c/go/+/330849
Trust: Meng Zhuo <mzh@golangcn.org>
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Meng Zhuo <mzh@golangcn.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The branch test only takes a few seconds so enable it in short mode. Also fix a
typo that currently prevents the code from compiling.
Change-Id: I25fc646b002a66c042c61fb1f56d5efa8e47903c
Reviewed-on: https://go-review.googlesource.com/c/go/+/356249
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Even after type-checking the RHS of a type declaration, we may not yet
be able to expand, if the RHS is itself an instance (see #49043).
We can instead rely on the mechanisms we have in place for delayed
expansion.
Fixes#49043
Change-Id: Ibffa4c1b1163c824b5c7e151aaac35f3e8c84ec7
Reviewed-on: https://go-review.googlesource.com/c/go/+/356533
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Rather than using Checker.later in newNamed, add a Checker.defTypes
field to track named types that have been created during type-checking,
and use this to expand named types as a final phase in type checking.
We have encountered several bugs related to infinite recursion while
expanding named types, because (I would argue) we have two conflicting
requirements in the type checker: ensuring that we eventually collapse
underlying chains, and yet allowing lazy substitution of the underlying
type in instances. The former is necessary for correctness, and to
ensure that we detect cycles during the type-checking pass. The latter
is necessary to allow infinitely expanding patterns of instances through
underlying or method definitions.
I believe this CL reconciles these conflicting requirements, by creating
a boundary between types that are encountered in the source during
type checking, and instances that are created by recursive evaluation.
At the end of the type checking pass, Checker.defTypes should contain
all possible origin types for instantiation. Once we compute the true
underlying for these origin types, any remaining instances that are
unresolved are guaranteed to have an origin with a valid underlying.
Therefore, we can return from the type-checking pass without calling
under() for these remaining instances.
Fixes#48703Fixes#48974
Change-Id: I1474f514e2ab71c1ad4c3704fe32bfba11d59394
Reviewed-on: https://go-review.googlesource.com/c/go/+/356490
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Add constraint type inference for type instances, to be consistent with
inference of function values.
Fixes#47990
Change-Id: Ib99b5215cb2da5c10badc4de7e9e60ca0e48489f
Reviewed-on: https://go-review.googlesource.com/c/go/+/356489
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
When (*bufio.Writer).ReadFrom is called with a partially filled buffer,
fill out and flush the buffer and then call the underlying writer's
ReadFrom method if present.
Fixes#44815.
Change-Id: I15b3ef0746d0d60fd62041189a9b9df11254dd29
Reviewed-on: https://go-review.googlesource.com/c/go/+/340530
Trust: Damien Neil <dneil@google.com>
Run-TryBot: Damien Neil <dneil@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It was noticed through some other investigation that BitLen32
was not generating the best code and found that it wasn't recognized
as an intrinsic. This corrects that and enables the test for PPC64.
Change-Id: Iab496a8830c8552f507b7292649b1b660f3848b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/355872
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
This change removes the js.Wrapper interface for performance reasons.
See proposal #44006 for details.
This is a breaking change, but syscall/js is exempt from Go's
compatibility promise.
Fixes#44006
Change-Id: I968cd14b1e61cc72ea9f84240b6bd29e8b8ae673
Reviewed-on: https://go-review.googlesource.com/c/go/+/356430
Trust: Richard Musiol <neelance@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
This changes Go, to remove this unused field on the `Tree` struct. Which seems to replaced by the non-private field `Mode`.
Change-Id: I5b384424cf60aa0af36eb8aad1d8db3f99b9838e
GitHub-Last-Rev: 4b033f967b
GitHub-Pull-Request: golang/go#48028
Reviewed-on: https://go-review.googlesource.com/c/go/+/345789
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Allowing eliminates a class of possible misuse of unsafe.Pointer, and
allow callers to migrate from Value.Addr and Value.Pointer, thus they
can be now deprecated.
Fixes#40592
Change-Id: I798e507c748922cac5cc1c1971c1b2cc7095a068
Reviewed-on: https://go-review.googlesource.com/c/go/+/350691
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The doc mentions that "UnsafeAddr returns a _pointer_ to v's data", but
it returns a uintptr instead, which don't have pointer semantic.
Change-Id: I557d5597cbc485356ca803eb496a99d6db8c63ba
Reviewed-on: https://go-review.googlesource.com/c/go/+/350690
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The compiler refuses to do spectre mitigation on 386, but the
assembler doesn't. Fix that.
Fixes#49006
Change-Id: I887b6f7ed7523a47f463706f06ca4c2c6e828b6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/356190
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
After CL 349012 and CL 350911, we can fully handle these
labeled statements, so we can allow them when inlining.
Updates #14768
Change-Id: I0ab3fd3f8d7436b49b1aedd946516b33c63f5747
Reviewed-on: https://go-review.googlesource.com/c/go/+/355497
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: David Chase <drchase@google.com>
Trust: Dan Scales <danscales@google.com>
This CL avoids a useless follow-on error (that gets reported before the
actual error due to source position). This addresses the first part of
the issue below.
Thanks to @cuonglm for the suggestion for the fix.
For #49005.
Change-Id: Ifdd83072a05c32e115dc58a0233868a64f336f3f
Reviewed-on: https://go-review.googlesource.com/c/go/+/356449
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The respective issue was fixed in types2 with CL 356189;
and the problem didn't exist in go/types. This CL simply
adds the test case to the type checkers as well.
For #49003.
Change-Id: Ib50ee8bb0ad21f2916f2b79d4f77593302899a3e
Reviewed-on: https://go-review.googlesource.com/c/go/+/356411
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Make sure that an embedded field like "MyStruct[T]" works and can be
referenced via the name MyStruct.
Change-Id: I8be1f1184dd42c4e54e4144aff2fd85e30af722f
Reviewed-on: https://go-review.googlesource.com/c/go/+/356312
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
The list of environments to support with wasm_exec.js was becoming too
large to maintain. With this change, wasm_exec.js expects that the
environment provides all necessary polyfills.
The standardized "globalThis" is used for accessing the environment.
wasm_exec.js now only provides stub fallbacks for globalThis.fs and
globalThis.process.
All code specific to Node.js is now in a separate file.
Change-Id: I076febbd94d4d7845260faad972f450f74a7b983
Reviewed-on: https://go-review.googlesource.com/c/go/+/347353
Trust: Richard Musiol <neelance@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Simple cleanup: convert a bunch of if's to a switch statement in
getInstInfo. Also, use a few extra variables to avoid repeated node
conversions (such as n.(*ir.CallExpr))
Change-Id: I7a2a4efb569415256a8bc9350fb100bd2d8cfb39
Reviewed-on: https://go-review.googlesource.com/c/go/+/356311
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
SetImplicit() has an explicit meaning and really shouldn't be used in
this way - its use is left over from early prototype of the dictionary
code. Convert from using SetImplicit to just using a map during
traversal.
Change-Id: I3d257c101a859f000e159d7ced307d1b7cf990d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/356310
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Both netpollblock and netpollunblock read gpp using a non-atomic load.
When consuming a ready event, netpollblock clears gpp using a non-atomic
store, thus skipping a barrier.
Thus on systems with weak memory ordering, a sequence like so this is
possible:
T1 T2
1. netpollblock: read gpp -> pdReady
2. netpollblock: store gpp -> 0
3. netpollunblock: read gpp -> pdReady
4. netpollunblock: return
i.e., without a happens-before edge between (2) and (3), netpollunblock
may read the stale value of gpp.
Switch these access to use atomic loads and stores in order to create
these edges.
For ease of future maintainance, I've simply changed rg and wg to always
be accessed atomically, though I don't believe pollOpen or pollClose
require atomics today.
Fixes#48925
Change-Id: I903ea667eea320277610b4f969129935731520c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/355952
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: David Chase <drchase@google.com>
The go command no longer reports an error when invoked in a repository
nested inside another. This check is still used by 'go get' in GOPATH
mode when locating a repository, but it's not needed when preparing
the build stamp.
Fixes#49004
Change-Id: I4ed4dcc04174d2d42da8651d47e52ab1d7d66e35
Reviewed-on: https://go-review.googlesource.com/c/go/+/356309
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This pulls in some code and tests from CL 353355.
This change makes some refactors for when we read
to and write from memory during minimization.
That fixes a bug when minimizing interesting inputs.
Now, if an error occurs while minimizing an interesting
input, that value will continue to be minimized as a
crash, and returned to the user.
This change also allows minimization of a crash that
occurred during the warmup phase. We don't want to
minimize failures in the seed corpus, but if an entry
in the cache causes a new failure, then there's no
compelling reason why we shouldn't try to minimize it.
Fixes#48731
Change-Id: I7262cecd8ea7ae6fdf932f3a36db55fb062a1f2a
Reviewed-on: https://go-review.googlesource.com/c/go/+/355691
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Roland Shoemaker <roland@golang.org>
This CL fixes the subtle issue that Elem can promote a
not-in-heap pointer, which could be any bit pattern, into an
unsafe.Pointer, which the garbage collector can see. If that
resulting value is bad, it can crash the GC.
Make sure that we don't introduce bad pointers that way. We can
make Elem() panic, because any such bad pointers are in the Go heap,
and not-in-heap pointers are not allowed to point into the Go heap.
Update #48399
Change-Id: Ieaf35a611b16b4dfb5e907e229ed4a2aed30e18c
Reviewed-on: https://go-review.googlesource.com/c/go/+/350153
Trust: Keith Randall <khr@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Add a simple mechanism to provide formatted descriptions for
delayed actions. The comment strings are printed when tracing
is enabled and the delayed action is executed. This results
in more easily decipherable tracing output.
Requires debug mode in order to minimize the overhead during normal
execution. Use the mechanism in a few places to show typical use.
Also cleaned up a few unrelated comments.
Change-Id: Ic273c380c3963341500396ec62b694d143c25de2
Reviewed-on: https://go-review.googlesource.com/c/go/+/355871
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Modify the phase for creating needed function/method instantiations and
modifying functions to use those instantiations, so that the phase is
self-contained and can be called again after inlining. This is to deal
with the issue that inlining may reveal new fully-instantiated types
whose methods must be instantiated.
With this change, we have an extra phase for instantiation after
inlining, to take care of the new fully-instantiated types that have
shown up during inlining. We call inline.InlineCalls() for any new
instantiated functions that are created.
Change-Id: I4ddf0b1907e5f1f7d45891db7876455a99381133
Reviewed-on: https://go-review.googlesource.com/c/go/+/352870
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Alexander Rakoczy <alex@golang.org>
This fixes a test failure on the 386-longtest builder.
For #37475
Change-Id: Icd1d3474968fcf85ef893190760fb488302abc3a
Reviewed-on: https://go-review.googlesource.com/c/go/+/356209
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Same for Value.
Add a bigger test. Include some shouldPanic checks.
Fix a bug in assignment conversion.
Fixes#48294
Change-Id: Id863ee5122a5787a7b35574b18586fd24d118788
Reviewed-on: https://go-review.googlesource.com/c/go/+/356049
Trust: Keith Randall <khr@golang.org>
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Fixes a test failure in cmd/go TestScript/mod_outside.
make.bash (cmd/dist) builds everything with -gcflags=all= -ldflags=all=
by default. If those no-op flags aren't used, all GOROOT binaries
appear stale.
It's likely safe to omit those flags in cmd/dist if they're
empty. Checking out a new commit in GOROOT would always cause
staleness since the VCS info would change.
For #37475
Change-Id: Ic9aa0f3b7318e05fbb2f7d2c008ad07a4c61952f
Reviewed-on: https://go-review.googlesource.com/c/go/+/356014
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This CL fixes the debug/buildinfo test, which did not expect build settings.
For #37475
Change-Id: Ie8c15ec633b4eec6a976120c8db64f116589d98e
Reviewed-on: https://go-review.googlesource.com/c/go/+/356012
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
string(int) conversions are somewhat special and deserve an entry.
Change-Id: Ia68d047cfdb2f98e837bf663659f7f46404b16ac
Reviewed-on: https://go-review.googlesource.com/c/go/+/355989
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This flag is not used anymore.
Change-Id: Id083ffa4f0a3051d3f1905a211db8acaaf525cf4
Reviewed-on: https://go-review.googlesource.com/c/go/+/355931
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Test functions with type parameters cannot be invoked without type
arguments, so cmd/go would previously fail with a type-checking error in
the test harness.
Avoid this by producing an error explaining that test functions cannot
have type parameters.
Fixes#48953
Change-Id: I4e39c9b7a06c964fad5f12d74d262aa090c25d79
Reviewed-on: https://go-review.googlesource.com/c/go/+/355889
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Toolchain flags (like -gcflags), build tags (including race and msan),
and cgo variables (including CGO_ENABLED, CGO_CPPFLAGS and others) are
now stamped into binaries.
For #37475
Change-Id: I9023e682c0618f91805434946c6bc937536b69bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/355493
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
When the go command builds a binary, it will now stamp the current
revision from the local Git or Mercurial repository, and it will also
stamp whether there are uncommitted edited or untracked files. Only
Git and Mercurial are supported for now.
If no repository is found containing the current working directory
(where the go command was started), or if either the main package
directory or the containing module's root directory is outside the
repository, no VCS information will be stamped. If the VCS tool is
missing or returns an error, that error is reported on the main
package (hinting that -buildvcs may be disabled).
This change introduces the -buildvcs flag, which is enabled by
default. When disabled, VCS information won't be stamped when it would
be otherwise.
Stamped information may be read using 'go version -m file' or
debug.ReadBuildInfo.
For #37475
Change-Id: I4e7d3159e1c270d85869ad99f10502e546e7582d
Reviewed-on: https://go-review.googlesource.com/c/go/+/353930
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The same code was copied into debug/buildinfo. 'go version' doesn't
need its own copy.
For #37475
Change-Id: I9e473ce574139a87a5f9c63229f0fc7ffac447a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/353929
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
BuildInfo now includes the version of Go used to build a binary, as
reported by runtime.Version() or 'go version'.
For #37475
Change-Id: Id07dda357dc70599d64a9202dab894c7288de1de
Reviewed-on: https://go-review.googlesource.com/c/go/+/353888
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
These functions provide access to module information stamped into Go
binaries. In the future, they'll provide access to other information
(like VCS info).
These functions are added in a new package instead of runtime/debug
since they use binary parsing packages like debug/elf, which would
make runtime/debug an unacceptably heavy dependency. The types in
runtime/debug are still used; debug/buildinfo uses them via type
aliases.
This information is already available for the running binary through
debug.ReadBuildInfo and for other binaries with 'go version -m', but
until now, there hasn't been a way to get it for other binaries
without installing cmd/go.
This change copies most of the code in cmd/go/internal/version. A
later CL will migrate 'go version -m' to use this package.
For #37475Fixes#39301
Change-Id: I0fbe0896e04f12ef81c6d79fb61b20daede86159
Reviewed-on: https://go-review.googlesource.com/c/go/+/353887
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Previously, modload.PackageBuildInfo returned a string containing
information about modules used to build an executable. This string is
embedded in the binary and can be read with debug.ReadBuildInfo or
'go version -m'.
With this change, debug.BuildInfo now has a MarshalText method that
returns a string in the same format as modload.PackageBuildInfo.
Package.load now calls Package.setBuildInfo, which constructs a
debug.BuildInfo, formats it with MarshalText, then sets
Package.Internal.BuildInfo. This is equivalent to what
modload.PackageBuildInfo did.
modload.PackageBuildInfo is deleted, since it's no longer used.
For #37475
Change-Id: I5875a98cb64737637fec2a450ab2ffa7f1805707
Reviewed-on: https://go-review.googlesource.com/c/go/+/353886
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
