Use the binutils Git repository instead of CVS.
Change-Id: I10100ca44d64ab3621367d1d4ac9e9a50d212d0d
Reviewed-on: https://go-review.googlesource.com/c/go/+/237839
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The GCC code repository is now hosted on Git. Adjust the instructions in
gccgo_install.html accordingly.
Change-Id: I443a8b645b63e63785979bc0554521e3dc3b0bf7
Reviewed-on: https://go-review.googlesource.com/c/go/+/237798
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Make sure that if a field comparison might panic, we evaluate
(and short circuit if not equal) all previous fields, and don't
evaluate any subsequent fields.
Add a bunch more tests to the equality+panic checker.
Update #8606
Change-Id: I6a159bbc8da5b2b7ee835c0cd1fc565575b58c46
Reviewed-on: https://go-review.googlesource.com/c/go/+/237919
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts golang.org/cl/190659 and golang.org/cl/226218, minus the
regression tests in the latter.
The original work happened in golang.org/cl/151157, which was reverted
in golang.org/cl/190909 due to a crash found by fuzzing.
We tried a second time in golang.org/cl/190659, which shipped with Go
1.14. A bug was found, where strings would be mangled in certain edge
cases. The fix for that was golang.org/cl/226218, which was backported
into Go 1.14.4.
Unfortunately, a second regression was just reported in #39555, which is
a similar case of strings getting mangled when decoding under certain
conditions. It would be possible to come up with another small patch to
fix that edge case, but instead, let's just revert the entire
optimization, as it has proved to do more harm than good. Moreover, it's
hard to argue or prove that there will be no more such regressions.
However, all the work wasn't for nothing. First, we learned that the way
the decoder unquotes tokenized strings isn't simple; initially, we had
wrongly assumed that each string was unquoted exactly once and in order.
Second, we have gained a number of regression tests which will be useful
to prevent the same mistakes in the future, including the test cases we
add in this CL.
Fixes#39555.
Change-Id: I66a6919c2dd6d9789232482ba6cf3814eaa70f61
Reviewed-on: https://go-review.googlesource.com/c/go/+/237838
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
TestNetpollBreak was sometimes timing out on Plan 9, where
netpoll_stub.go implements only enough of the network poller
to support runtime timers, using a notetsleep / notewakeup
pair. The runtime.lock which serialises the use of the note
doesn't guarantee fairness, and in practice the netpoll call
used by the test can be starved by the netpoll call from the
scheduler which supports the overall 'go test' timeout.
Calling osyield after relinquishing the lock gives the two
callers a more even chance to take a turn, which prevents
the test from timing out.
Fixes#39437
Change-Id: Ifbe6aaf95336d162d9d0b6deba19b8debf17b071
Reviewed-on: https://go-review.googlesource.com/c/go/+/237698
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The benchmark throughput numbers don't change, but the set-up time (the
time taken before the b.ResetTimer() call) drops from 460ms to 4ms.
Change-Id: I5a6756643dff6127f6d902455d83459c084834fc
Reviewed-on: https://go-review.googlesource.com/c/go/+/237757
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This alert is triggering occasionally. I've investigated the
collisions that happen, and they all seem to be pairwise, so they are
not a big deal. "pairwise" = when there are 32 collisions, it is two
keys mapping to the same hash, 32 times, not 33 keys all mapping to
the same hash.
Add some t.Logf calls in case this comes back, which will help isolate
the problem.
Fixes#39352
Change-Id: I1749d7c8efd0afcf9024d8964d15bc0f58a86e4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/237718
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Support for linux/386 was added to Delve in version 1.4.1, but the
version of Delve currently installed on the linux-386-longtest
builder is 1.2.0. That isn't new enough, which causes the test
to fail. Skip it on that builder until it can be made to work.
The only reason it used to pass on the linux-386-longtest builder
before is because that builder was misconfigured to run tests for
linux/amd64. This was resolved in CL 234520.
Also improve internal documentation and the text of skip reasons.
Fixes#39309.
Change-Id: I395cb1f076e59dd3a3feb53e1dcdce5101e9a0f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/237603
Reviewed-by: David Chase <drchase@google.com>
Other command line arguments are written in code tags, so add a code tag for consistency.
For #37419
Change-Id: I1948536c3a1860d93726484be2dc7bcb03dfdc2f
Reviewed-on: https://go-review.googlesource.com/c/go/+/237539
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Replace tab indentation with spaces for consistency, as all other indentation is done with spaces.
For #37419
Change-Id: I728a75ae0d00e637f57eb455b6039ffc1a5feed2
Reviewed-on: https://go-review.googlesource.com/c/go/+/237538
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
We replaced http.DefaultClient with securityPreservingHTTPClient,
but we still need that too many redirects check. This issue introduced
by CL 156838.
We introduce a special path to test rediret requests in the script test
framework. You can specify the number of redirects in the path.
$GOPROXY/redirect/<count>/...
Redirect request sequence details(count=8):
request: $GOPROXY/mod/redirect/8/rsc.io/quote/@v/v1.2.0.mod
redirect: $GOPROXY/mod/redirect/7/rsc.io/quote/@v/v1.2.0.mod
redirect: $GOPROXY/mod/redirect/6/rsc.io/quote/@v/v1.2.0.mod
redirect: $GOPROXY/mod/redirect/5/rsc.io/quote/@v/v1.2.0.mod
redirect: $GOPROXY/mod/redirect/4/rsc.io/quote/@v/v1.2.0.mod
redirect: $GOPROXY/mod/redirect/3/rsc.io/quote/@v/v1.2.0.mod
redirect: $GOPROXY/mod/redirect/2/rsc.io/quote/@v/v1.2.0.mod
redirect: $GOPROXY/mod/redirect/1/rsc.io/quote/@v/v1.2.0.mod
the last: $GOPROXY/mod/rsc.io/quote/@v/v1.2.0.mod
Fixes#39482
Change-Id: I149a3702b2b616069baeef787b2e4b73afc93b0e
Reviewed-on: https://go-review.googlesource.com/c/go/+/237177
Run-TryBot: Baokun Lee <nototon@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This API and functionality was added late in the Go 1.15 release
cycle, and use within gopls has revealed some shortcomings. It's
possible (but not decided) that we'll want a different API long-term,
so for now this CL renames UsesCgo to a non-exported name to avoid
long-term commitment under the Go 1 compat guarantee.
Updates #16623.
Updates #39072.
Change-Id: I04bc0c161a84adebe43e926df5df406bc794c3db
Reviewed-on: https://go-review.googlesource.com/c/go/+/237417
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The scheduler assumes two special invariants that apply to tuple
selectors (Select0 and Select1 ops):
1. There is only one tuple selector of each type per generator.
2. Tuple selectors and generators reside in the same block.
Prior to this CL the assumption was that these invariants would
only be broken by the CSE pass. The CSE pass therefore contained
code to move and de-duplicate selectors to fix these invariants.
However it is also possible to write relatively basic optimization
rules that cause these invariants to be broken. For example:
(A (Select0 (B))) -> (Select1 (B))
This rule could result in the newly added selector (Select1) being
in a different block to the tuple generator (see issue #38356). It
could also result in duplicate selectors if this rule matches
multiple times for the same tuple generator (see issue #39472).
The CSE pass will 'fix' these invariants. However it will only do
so when optimizations are enabled (since disabling optimizations
disables the CSE pass).
This CL moves the CSE tuple selector fixup code into its own pass
and makes it mandatory even when optimizations are disabled. This
allows tuple selectors to be treated like normal ops for most of
the compilation pipeline until after the new pass has run, at which
point we need to be careful to maintain the invariant again.
Fixes#39472.
Change-Id: Ia3f79e09d9c65ac95f897ce37e967ee1258a080b
Reviewed-on: https://go-review.googlesource.com/c/go/+/237118
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This removes the same logic from run.bat that was removed from
cmd/dist in CL 236819.
The duplicated logic was removed from run.bash and run.rc in CL 6531,
but that part of run.bat was apparently missed (and not noticed
because its effect was redundant).
Also fix a path-separator bug in cmd/addr2line.TestAddr2Line that was
exposed as a result.
Fixes#39478
Updates #39385
Change-Id: I00054966cf92ef92a03681bf23de7f45f46fbb5e
Reviewed-on: https://go-review.googlesource.com/c/go/+/237359
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Restore previously sent SCTs and stapled OCSP response during session
resumption for both TLS 1.2 and 1.3. This behavior is somewhat
complicated for TLS 1.2 as SCTs are sent during the server hello,
so they override what is saved in ClientSessionState. It is likely
that if the server is sending a different set of SCTs there is probably
a reason for doing so, such as a log being retired, or SCT validation
requirements changing, so it makes sense to defer to the server in
that case.
Fixes#39075
Change-Id: I3c0fa2f69c6bf0247a447c48a1b4c733a882a233
Reviewed-on: https://go-review.googlesource.com/c/go/+/234237
Reviewed-by: Filippo Valsorda <filippo@golang.org>
When the arrangement specifier is "B16", the 30-bit should be 1 rather than 0.
This CL fixes this error.
Fixes#39445
Change-Id: Ib44881cdb8b3aab855cb30f2c52a085cd73a6a2c
Reviewed-on: https://go-review.googlesource.com/c/go/+/236638
Run-TryBot: eric fang <eric.fang@arm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The minor changes to the library section has been populated
with TODOs for individual packages using relnote in CL 235757,
and they've been resolved in the following CLs.
We will look things over as part of finishing touches on
the release notes, but this TODO is resolved for beta 1.
For #37419.
Change-Id: I942f81a957fe8df8f630b4406ca29f73602d080a
Reviewed-on: https://go-review.googlesource.com/c/go/+/237157
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Also do not unset it by default in the tests for cmd/go.
GOROOT_FINAL affects the GOROOT value embedded in binaries,
such as 'cmd/cgo'. If its value changes and a build command
is performed that depends on one of those binaries, the binary
would be spuriously rebuilt.
Instead, only unset it in the specific tests that make assumptions
about the GOROOT paths embedded in specific compiled binaries.
That may cause those tests to do a little extra rebuilding when
GOROOT_FINAL is set, but that little bit of extra rebuilding
seems preferable to spuriously-stale binaries.
Fixes#39385
Change-Id: I7c87b1519bb5bcff64babf1505fd1033ffa4f4fb
Reviewed-on: https://go-review.googlesource.com/c/go/+/236819
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
CL 236857 removed all uses of whitelist/blacklist, which is great.
But it substituted awkward phrasing using allowlist/blocklist,
especially as verbs or participles. This CL uses more standard English,
like "allow the function" or "blocked functions" instead of
"allowlist the function" or "blocklisted functions".
Change-Id: I9106a2fdbd62751c4cbda3a77181358a8a6d0f13
Reviewed-on: https://go-review.googlesource.com/c/go/+/236917
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The removed line assumed that the script's WORK directory is not a
child of any directory containing version-control metadata.
While that assumption does hold in most cases, it does not hold when,
for example, $TMPDIR is $HOME/tmp and $HOME/.git/config exists.
A similar situation may or may not arise when using
golang.org/x/build/cmd/release. Either way, the assertion is incorrect
and was interfering with local testing for #39385.
Updates #39385Fixes#39431
Change-Id: I67813d7ce455aa9b56a6eace6eddebf48d0f7fa6
Reviewed-on: https://go-review.googlesource.com/c/go/+/236818
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
The page sweeper depends on spans being marked if any object in the
span is marked, but currently only greyobject does this.
gcmarknewobject and wbBufFlush1 also mark objects, but neither set
span marks. As a result, if there are live objects on a span, but
they're all marked via allocation or write barriers, then the span
itself won't be marked and the page reclaimer will free the span,
ultimately leading to memory corruption when the memory for those live
allocations gets reused.
Fix this by making gcmarknewobject and wbBufFlush1 also mark pages.
No test because I have no idea how to reliably (or even unreliably)
trigger this.
Fixes#39432.
Performance is a wash or very slightly worse. I benchmarked the
gcmarknewobject and wbBufFlush1 changes independently and both showed
a slight performance improvement, so I'm going to call this noise.
name old time/op new time/op delta
BiogoIgor 15.9s ± 2% 15.9s ± 2% ~ (p=0.758 n=25+25)
BiogoKrishna 15.7s ± 3% 15.7s ± 3% ~ (p=0.382 n=21+21)
BleveIndexBatch100 4.94s ± 3% 5.07s ± 4% +2.63% (p=0.000 n=25+25)
CompileTemplate 204ms ± 1% 205ms ± 1% +0.43% (p=0.000 n=21+23)
CompileUnicode 77.8ms ± 1% 78.1ms ± 1% ~ (p=0.130 n=23+23)
CompileGoTypes 731ms ± 1% 733ms ± 1% +0.30% (p=0.006 n=22+22)
CompileCompiler 3.64s ± 2% 3.65s ± 3% ~ (p=0.179 n=24+25)
CompileSSA 8.44s ± 1% 8.46s ± 1% +0.30% (p=0.003 n=22+23)
CompileFlate 132ms ± 1% 133ms ± 1% ~ (p=0.098 n=22+22)
CompileGoParser 164ms ± 1% 164ms ± 1% +0.37% (p=0.000 n=21+23)
CompileReflect 455ms ± 1% 457ms ± 2% +0.50% (p=0.002 n=20+22)
CompileTar 182ms ± 2% 182ms ± 1% ~ (p=0.382 n=22+22)
CompileXML 245ms ± 3% 245ms ± 1% ~ (p=0.070 n=21+23)
CompileStdCmd 16.5s ± 2% 16.5s ± 3% ~ (p=0.486 n=23+23)
FoglemanFauxGLRenderRotateBoat 12.9s ± 1% 13.0s ± 1% +0.97% (p=0.000 n=21+24)
FoglemanPathTraceRenderGopherIter1 18.6s ± 1% 18.7s ± 0% ~ (p=0.083 n=23+24)
GopherLuaKNucleotide 28.4s ± 1% 29.3s ± 1% +2.84% (p=0.000 n=25+25)
MarkdownRenderXHTML 252ms ± 0% 251ms ± 1% -0.50% (p=0.000 n=23+24)
Tile38WithinCircle100kmRequest 516µs ± 2% 516µs ± 2% ~ (p=0.763 n=24+25)
Tile38IntersectsCircle100kmRequest 689µs ± 2% 689µs ± 2% ~ (p=0.617 n=24+24)
Tile38KNearestLimit100Request 608µs ± 1% 606µs ± 2% -0.35% (p=0.030 n=19+22)
[Geo mean] 522ms 524ms +0.41%
https://perf.golang.org/search?q=upload:20200606.4
Change-Id: I8b331f310dbfaba0468035f207467c8403005bf5
Reviewed-on: https://go-review.googlesource.com/c/go/+/236817
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Rather than hashing the encoding of the SPKI structure, hash the
bytes of the public key itself.
Fixes#39429
Change-Id: I55a0f8f08ab1f1b5702590b47d8b9a92d1dbcc1f
Reviewed-on: https://go-review.googlesource.com/c/go/+/236878
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Previously, if there was a non-directory file with the name vendor or
testdata in the Go source tree, it was possible for some directories
to be skipped by filepath.Walk performed in findGorootModules.
As unusual and unlikely as such non-directory files are, it's better
to ensure all directories are visited, and all modules in the GOROOT
source tree are found.
This increases confidence that tests relying on findGorootModule
will not have unexpected false negatives.
For #36851.
For #36907.
Change-Id: I468e80d8f57119e2c72d546b3fd1e23c31fd6e6c
Reviewed-on: https://go-review.googlesource.com/c/go/+/236600
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This is a followup to CL 96495.
It should be simpler and more robust to achieve .bat files having
CRLF line endings by treating it as a binary file, like all other
files, and checking it in with the desired CRLF line endings.
A test is used to check the entire Go tree, short of directories
starting with "." and named "testdata", for any .bat files that
have anything other than strict CRLF line endings. This will help
catch any accidental modifications to existing .bat files or check
ins of new .bat files.
Importantly, this is compatible with how Gerrit serves .tar.gz files,
making it so that CRLF line endings are preserved.
The Go project is supported on many different environments, some of
which may have limited git implementations available, or none at all.
Relying on fewer git features and special rules makes it easier to
have confidence in the exact content of all files. Additionally, Go
development started in Subversion, moved to Perforce, then Mercurial,
and now uses Git.¹ Reducing its reliance on git-specific features will
help if there will be another transition in the project's future.
There are only 5 .bat files in the entire Go source tree, so a new one
being added is a rare event, and we prefer to do things in Go instead.
We still have the option of improving the experience for developers by
adding a pre-commit converter for .bat files to the git-codereview tool.
¹ https://groups.google.com/d/msg/golang-dev/sckirqOWepg/YmyT7dWJiocJFixes#39391.
For #37791.
Change-Id: I6e202216322872f0307ac96f1b8d3f57cb901e6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/236437
Reviewed-by: Bryan C. Mills <bcmills@google.com>
I had a look at the changes between 1.14 and master, and these are the
only two that seem relevant enough for the changelog.
There was also CL 179337 to reuse values when decoding map elements, but
it got reverted in CL 234559 and is not being included in 1.15.
Updates #37419.
Change-Id: Ib125415a953471ce29553a413d85aaf4b18a7a12
Reviewed-on: https://go-review.googlesource.com/c/go/+/236523
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
There's been plenty of discussion on the usage of these terms in tech.
I'm not trying to have yet another debate. It's clear that there are
people who are hurt by them and who are made to feel unwelcome by their
use due not to technical reasons but to their historical and social
context. That's simply enough reason to replace them.
Anyway, allowlist and blocklist are more self-explanatory than whitelist
and blacklist, so this change has negative cost.
Didn't change vendored, bundled, and minified files. Nearly all changes
are tests or comments, with a couple renames in cmd/link and cmd/oldlink
which are extremely safe. This should be fine to land during the freeze
without even asking for an exception.
Change-Id: I8fc54a3c8f9cc1973b710bbb9558a9e45810b896
Reviewed-on: https://go-review.googlesource.com/c/go/+/236857
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Khosrow Moossavi <khos2ow@gmail.com>
Reviewed-by: Leigh McCulloch <leighmcc@gmail.com>
Reviewed-by: Urban Ishimwe <urbainishimwe@gmail.com>
Use the "Core library -> runtime" section for changes that affect the
runtime package API and use the top-level "Runtime" section for
package-independent behavior changes. Also, move the one change that's
really about os (and net) into the "os" package section and reword it
to be more accurate.
Updates #37419.
Change-Id: I32896b039f29ac67308badd0d0b36e8c6e39f64f
Reviewed-on: https://go-review.googlesource.com/c/go/+/236718
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The TODO was added durring the initial creation of the document.
In the current location, it makes it seem like the tzdata documents
are incomplete when they are complete. It is understood that the
entire Core library section will be a work in progress until the release.
For #37419
Change-Id: Ic857eb0ec2583781c701985ea62e519e9d940090
Reviewed-on: https://go-review.googlesource.com/c/go/+/236760
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
