The lldb child process is killed if a test runs too long. Also
kill it when the setup times out (and is retried).
Might help with builder flakes where all 5 attempts to start up
lldb fail even though the tests before and after the timeouts
succeed. For example:
...
ok vendor/golang_org/x/net/route 37.797s
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
go_darwin_arm_exec: failed to start test harness (retry attempted)
FAIL vendor/golang_org/x/text/transform 115.185s
ok vendor/golang_org/x/text/unicode/norm 122.773s
...
Change-Id: I6638860522896491dccfa12f1e520c0f23df6d66
Reviewed-on: https://go-review.googlesource.com/67791
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is a step toward using cached build artifacts: the importcfg
will direct the compiler and linker to read them right from the cache
if necessary. However, this CL does not have a cache yet, so it still
reads them from the usual install location or build location.
Even so, this fixes a long-standing issue that -I and -L (no longer used)
are not expressive enough to describe complex GOPATH setups.
Shared libraries are handled enough that all.bash passes, but
there may still be more work to do here. If so, tests and fixes
can be added in follow-up CLs.
Gccgo will need updating to support -importcfg as well.
Fixes#14271.
Change-Id: I5c52a0a5df0ffbf7436e1130c74e9e24fceff80f
Reviewed-on: https://go-review.googlesource.com/56279
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When rewriting loads and stores accessing global variables to use the
GOT we were making use of REGTMP (R10). Unfortunately loads and stores
with large offsets (larger than 20-bits) were also using REGTMP,
causing it to be clobbered and subsequently a segmentation fault.
This can be fixed by using REGTMP2 (R11) for the rewrite. This is fine
because REGTMP2 only has a couple of uses in the assembler (division,
high multiplication and storage-to-storage instructions). We didn't
use REGTMP2 originally because it used to be used more frequently,
in particular for stores of constants to memory. However we have now
eliminated those uses.
This was found while writing a test case for CL 63030. That test case
is included in this CL.
Change-Id: I13956f1f3ca258a7c8a7ff0a7570d2848adf7f68
Reviewed-on: https://go-review.googlesource.com/65011
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It's not needed, and the current expectation is that it will go away
in the future.
Change-Id: I5f46800e748d9ffa484bda6d1738290c8e00ac2b
Reviewed-on: https://go-review.googlesource.com/63751
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
rune has a well-defined size, but C.int is implementation-specified.
Using one as the other should require an explicit conversion.
updates #13467
Change-Id: I53ab2478427dca790efdcc197f6b8d9fbfbd1847
Reviewed-on: https://go-review.googlesource.com/63730
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I had passed 1 instead of 2 to the SplitAfterN call in
errorstest.check, so all of the cases were erroneously falling through
to the non-regexp case (and passing even if the actual error didn't
match).
Now, we use bytes.HasSuffix to check for the non-regexp case, so we
will not incorrectly match a regexp comment to the non-regexp case.
updates #13467
Change-Id: Ia6be928a495425f2b7bae5001bd01346e115dcfa
Reviewed-on: https://go-review.googlesource.com/63692
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This makes the test easier to run in isolation and easier to change,
and simplifies the code to run the tests in parallel.
updates #13467
Change-Id: I5622b5cc98276970347da18e95d071dbca3c5cc1
Reviewed-on: https://go-review.googlesource.com/63276
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Previously, test7978 failed if the user did not invoke it with
GOTRACEBACK=2 already set in their environment. Environment-sensitive
test are awkward, and in this case there is a very simple workaround:
set the traceback level to the necessary value explicitly.
Change-Id: I7d576f24138aa8a41392148eae11bbeaef558573
Reviewed-on: https://go-review.googlesource.com/63275
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 62593 broken TestExportedSymbols and TestUnexportedSymbols
because it started executing android test binary on host.
Make them run on android.
Hopefully fixes android build.
Change-Id: Ic0bb9f0cbbefca23828574282caa33a03ef72431
Reviewed-on: https://go-review.googlesource.com/62830
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Elias Naur <elias.naur@gmail.com>
Change-Id: Ib35bb7fc9c5b4ccc9b8e1bd16443e0b307be9406
Reviewed-on: https://go-review.googlesource.com/62593
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#21809
Change-Id: Ic43077c6bea3c7cdc9611e74abf07b6deab70433
Reviewed-on: https://go-review.googlesource.com/62670
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: Id1b5939cfcd210a0cb5f61915ce2d077c7fcec11
Reviewed-on: https://go-review.googlesource.com/62592
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The noopt builder sets GO_GCFLAGS when building the standard library.
Set it when building plugins to ensure the -shared packages built for it
have the same inlining in the export data (and thus the same package
version).
Tested locally with GO_GCFLAGS="-N -l" ./all.bash
Fixes#17937
Change-Id: Id037cfbf4af744c05c47bdc58eea60a5dba69533
Reviewed-on: https://go-review.googlesource.com/62511
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
1. remove broken verification
The runtime check assumes that no-pcln symbol entry have zero value,
but the linker emit no entries if the symbol is no-pcln.
As a result, if there are no-pcln symbols at the very end of pcln
table, it will panic.
2. correct condition of export
Handle special chracters in pluginpath correcty.
Export "go.itab.*", so different plugins can share the same itab.
Fixes#18190
Change-Id: Ia4f9c51d83ce8488a9470520f1ee9432802cfc1d
Reviewed-on: https://go-review.googlesource.com/61091
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Along the way, track bad modules. Make sure they don't end up on
the active modules list, and aren't accidentally reprocessed as
new plugins.
Fixes#19004
Change-Id: I8a5e7bb11f572f7b657a97d521a7f84822a35c07
Reviewed-on: https://go-review.googlesource.com/61171
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It is common to have multiple plugins built from ephemeral
source files all with the same name:
# generate main.go
go build -buildmode=plugin -o=p1.so main.go
# rm main.go, generate new main.go
go build -buildmode=plugin -o=p2.so main.go
...
These different plugins currently have the same build ID,
and hence the same package path. This means only one can be
loaded.
To remove this restriction, this commit adds the contents of the
main package source files to the plugin hash.
Fixes#19358
Change-Id: Icd42024b085feb29c09c2771aaecb85f8b528dd3
Reviewed-on: https://go-review.googlesource.com/61170
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When compiling a plugin, package main gets a new name so as not to
conflict with the main package in the host binary, or any other
plugins. It is already defined by cmd/go, and used by cmd/link when
filling out the "" package placeholder in symbols.
With this CL, the plugin-specific name for main is also passed to
cmd/compile's -p flag. This is used to fill out the pkgpath field
of types, and ensures that two types defined in two different plugin
mains with the same name will not be mistaken for one another at
runtime.
Fixes#21386
Change-Id: I8a646d8d7451caff533fe0007343ea8b8e1704ed
Reviewed-on: https://go-review.googlesource.com/60910
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The approach of https://golang.org/cl/43476 turned out incorrect.
The problem is that the sniff introduced by the CL only work for simple
expression. And when it fails it fallback to uint64, not int64, which
breaks backward compatibility.
In this CL, we use DWARF for guessing kind instead. That should be more
reliable than previous approach. And importanly, it fallbacks to int64 even
if it fails to guess kind.
Fixes#21708
Change-Id: I39a18cb2efbe4faa9becdcf53d5ac68dba180d46
Reviewed-on: https://go-review.googlesource.com/60510
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, cgo supports only macros which can be reduced to constants
or variables. The CL addresses remaining parts, macros which can be
represented as niladic functions.
The basic idea is simple:
1. make a thin wrapper function per macros.
2. replace macro expansions with function calls.
Fixes#10715Fixes#18720
Change-Id: I150b4fb48e9dc4cc34466ef6417c04ac93d4bc1a
Reviewed-on: https://go-review.googlesource.com/43970
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Current code uses names like "x" and "s" which can conflict with user's
code easily. Use cryptographic names.
Fixes#21668
Change-Id: Ib6d3d6327aa5b92d95c71503d42e3a79d96c8e15
Reviewed-on: https://go-review.googlesource.com/59710
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When running multiple iOS builds on the same host, GOIOS_DEVICE_ID
is used to distinguish the devices. To improve support,
- Only restart the particular device when invoking iostest.bash
with the -restart flag.
- Make the exec wrapper lock file per-device.
For the iOS builder.
Change-Id: Id6f222981f25036399a43c3202a393dba89d87cb
Reviewed-on: https://go-review.googlesource.com/57970
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Generated with
github.com/catapult/tracing/bin/vulcanize_trace_viewer
catapult @ ab4d571fa
Renamed trace_viewer_lean.html to trace_viewer_full.html
to make it clear we are using the full version of trace viewer
(waiting for https://github.com/catapult-project/catapult/issues/2247
to be fixed).
Update #15302
Change-Id: Ice808bb27ab79a1dec9fc863e0c5a761027ebfbe
Reviewed-on: https://go-review.googlesource.com/58750
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
If set, GOIOS_DEVICE_ID specifies the device id for the iOS exec
wrapper. With that, a single builder can host multiple iOS devices.
Change-Id: If3cc049552f5edbd7344befda7b8d7f73b4236e2
Reviewed-on: https://go-review.googlesource.com/57296
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: JBD <jbd@google.com>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
This reverts commit a6ffab6b67.
Reason for revert: with CL 57290 the tests run on Android again.
Change-Id: Ifeb29762a4cd0178463acfeeb3696884d99d2993
Reviewed-on: https://go-review.googlesource.com/57310
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
The testcshared test.bash was rewritten in Go, but the rewritten script
broke on Android. Make the tests run on Android again by:
- Restoring the LD_LIBRARY_PATH path (.).
- Restoring the Android specific C flags (-pie -fuse-ld=gold).
- Adding runExe to run test executables. All other commands must run on
the host.
Fixes#21513.
Change-Id: I3ea617a943c686b15437cc5c118e9802a913d93a
Reviewed-on: https://go-review.googlesource.com/57290
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Hopefully this will fix android build.
Maybe fixes#21513
Change-Id: I98f760562646f06b56e385c36927e79458465b92
Reviewed-on: https://go-review.googlesource.com/56790
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Another attempt to fix build
Change-Id: I26137c115ad4b5f5a69801ed981c146adf6e824c
Reviewed-on: https://go-review.googlesource.com/56750
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Hopefully fixes build.
Change-Id: If0629b95b923a65e4507073cf7aa44a5e178fc0f
Reviewed-on: https://go-review.googlesource.com/56711
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
This makes it much easier to run individual failing subtests.
Use $(go env CC) instead of always defaulting to clang; this makes it
easier to test with other compilers.
Run C binaries to detect incompatible compiler/kernel pairings instead
of sniffing versions.
updates #21196
Change-Id: I0debb3cc4a4244df44b825157ffdc97b5c09338d
Reviewed-on: https://go-review.googlesource.com/52910
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When calling a Go function that returns multiple values from C, cgo
generates a structure to hold the values. According to the documentation
this structure is called `struct <function-name>_return`. When compiling
for gccgo the generated structure name is `struct <function-name>_result`.
This change updates the output for gccgo to match the documentation and
output for gc.
Fixes#20910
Change-Id: Iaea8030a695a7aaf9d9f317447fc05615d8e4adc
Reviewed-on: https://go-review.googlesource.com/49350
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This should fix NaCl build failure for CL 49530.
Change-Id: Id9a54f0c81b1b5db5b5efb12a2ad6509c4ab42b3
Reviewed-on: https://go-review.googlesource.com/55770
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Otherwise, some test flags don't work.
Change-Id: Iacf3930d0eec28e4d690cd382adbb2ecf866a0e2
Reviewed-on: https://go-review.googlesource.com/55615
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Just like https://golang.org/cl/34783
Given cgo.go:
1 package main
2
3 /*
4 long double x = 0;
5 */
6 import "C"
7
8 func main() {
9 _ = C.x
10 _ = C.x
11 }
Before:
./cgo.go:10:6: unexpected: 16-byte float type - long double
After:
./cgo.go:9:6: unexpected: 16-byte float type - long double
The above test case is not portable. So it is tested on only amd64.
Change-Id: If0b84cf73d381a22e2ada71c8e9a6e6ec77ffd2e
Reviewed-on: https://go-review.googlesource.com/54950
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The activeModules function is called by the cgo pointer checking code,
which is called by the write barrier (when GODEBUG=cgocheck=2), and as
such must be nosplit/nowritebarrier.
Fixes#21306
Change-Id: I57f2124f14de7f3872b2de9532abab15df95d45a
Reviewed-on: https://go-review.googlesource.com/53352
Reviewed-by: Austin Clements <austin@google.com>
Check not only that a tsan program can be built, but also that it runs.
This fails with some installations of GCC 7.
Skip the tsan10 program when using GCC, as it reportedly hangs.
This is a patch to help people build 1.9; we may be able to do a
better fix for 1.10.
Updates #21196
Change-Id: Icd1ffbd018dc65a97ff45cab1264b9b0c7fa0ab2
Reviewed-on: https://go-review.googlesource.com/52790
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
http://golang.org/cl/50251 fixed a regression under TSAN.
This change adds a minimal reproducer for the observed symptom.
Change-Id: Ib9ad01b458b7fdec14d6c2fe3c243f9c64b3dcf2
Reviewed-on: https://go-review.googlesource.com/50371
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
clang can emit some dwarf.VoidType which are wrapped by multiple
dwarf.TypedefType. We need to unwrap those before further processing.
Fixes#20129
Change-Id: I671ce6aef2dc7b55f1a02aec5f9789ac1b369643
Reviewed-on: https://go-review.googlesource.com/44772
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
With current GCC a macro that refers to another macro can report an
error on the macro definition line, with a note on the use.
When cgo is trying to decide which line an error refers to,
it is looking at the uses. So if we see an error on a line that we
don't recognize followed by a note on a line that we do recognize,
treat the note as an error.
Fixes#20125.
Change-Id: I389cd0eb7d56ad2d54bef70e278d9f76c4d36448
Reviewed-on: https://go-review.googlesource.com/44290
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Hiroshi Ioka <hirochachacha@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For test.go:
package main
import (
"C"
"fmt"
)
func main() {
fmt.Println("Hello, world!")
C.no_such_f()
}
Before:
could not determine kind of name for C.no_such_f
After:
./test.go:10:2: could not determine kind of name for C.no_such_f
Fixes#18452
Change-Id: I49c136b7fa60fab25d2d5b905d440fe4d106e565
Reviewed-on: https://go-review.googlesource.com/34783
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Current code cannot handle string #define macros if those macros are
defined via other macros. This CL solve the issue.
Updates #18720
Change-Id: Ibed0773d10db3d545bb246b97e81c0d19e3af3d5
Reviewed-on: https://go-review.googlesource.com/41312
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, cgo converts integer macros into int64 if it's possible.
As a result, some macros which satisfy
math.MaxInt64 < x <= math.MaxUint64
will lose their original values.
This CL introduces the new probe to check signs,
so we can handle signed ints and unsigned ints separately.
Fixes#20369
Change-Id: I002ba452a82514b3a87440960473676f842cc9ee
Reviewed-on: https://go-review.googlesource.com/43476
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In PPC64 ELF files, the st_other field indicates the number of
prologue instructions between the global and local entry points.
We add the instructions in the compiler and assembler if -shared is used.
We were assuming that the instructions were present when building a
c-archive or PIE or doing dynamic linking, on the assumption that those
are the cases where the go tool would be building with -shared.
That assumption fails when using some other tool, such as Bazel,
that does not necessarily use -shared in exactly the same way.
This CL records in the object file whether a symbol was compiled
with -shared (this will be the same for all symbols in a given compilation)
and uses that information when setting the st_other field.
Fixes#20290.
Change-Id: Ib2b77e16aef38824871102e3c244fcf04a86c6ea
Reviewed-on: https://go-review.googlesource.com/43051
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
On Android, the exec wrapper passes on output from adb to its parent
process by passing on os.Stderr and os.Stdout to adb. If the adb
process somehow hangs, it will keep stderr and stdout will open, in turn
blocking go test from ever returning from its cmd.Wait() even though
it has killed the exec wrapper process.
Break the short circuit by introducing a wrapper between adb and the
exec wrapper, preventing os/exec.Run from passing along the raw
file descriptors for os.Stdout and os.Stderr.
(Hopefully) fixes occasional indefinite hangs on the Android builder.
Change-Id: I1188211fbde79b4a66bf93ff8e9d0091abf34560
Reviewed-on: https://go-review.googlesource.com/42271
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The "lldb start" phase often times out on the iOS builder. Increase
the timeout and see if that helps.
Change-Id: I92fd67cbfa90659600e713198d6b2c5c78dde20f
Reviewed-on: https://go-review.googlesource.com/41863
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Here we restrict using cgo builtin references because internally they're go functions
as opposed to C usafe.Pointer values.
Fixes#18889
Change-Id: I1e4332e4884063ccbaf9772c172d4462ec8f3d13
Reviewed-on: https://go-review.googlesource.com/40934
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously the "ABI hash" for a package (used to determine if a loaded shared
library has the ABI expected by its loader) was the hash of the entire
__.PKGDEF file. But that means it depends on the build ID generated by the go
tool for the package, which means that if a file is added (even a .c or .h
file!) to the package, the ABI changes, perhaps uncessarily.
Fixes#19920
Change-Id: If919481e1a03afb350c8a9c7a0666bb90ee90270
Reviewed-on: https://go-review.googlesource.com/40401
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Some tests need the src/runtime/textflag.h file. Make sure it is
included in iOS test runs.
Change-Id: I5e0e7ebe85679686ef15a7d336f28ac9b68a587a
Reviewed-on: https://go-review.googlesource.com/40915
Run-TryBot: Elias Naur <elias.naur@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Prior to this CL, flags such as NOSPLIT
on ATEXT Progs were stored in From3.Offset.
Some but not all of those flags were also
duplicated into From.Sym.Attribute.
This CL migrates all of those flags into
From.Sym.Attribute and stops creating a From3.
A side-effect of this is that printing an
ATEXT Prog can no longer simply dump From3.Offset.
That's kind of good, since the raw flag value
wasn't very informative anyway, but it did
necessitate a bunch of updates to the cmd/asm tests.
The reason I'm doing this work now is that
avoiding storing flags in both From.Sym and From3.Offset
simplifies some other changes to fix the data
race first described in CL 40254.
This CL almost passes toolstash-check -all.
The only changes are in cases where the assembler
has decided that a function's flags may be altered,
e.g. to make a function with no calls in it NOSPLIT.
Prior to this CL, that information was not printed.
Sample before:
"".Ctz64 t=1 size=63 args=0x10 locals=0x0
0x0000 00000 (/Users/josh/go/tip/src/runtime/internal/sys/intrinsics.go:35) TEXT "".Ctz64(SB), $0-16
0x0000 00000 (/Users/josh/go/tip/src/runtime/internal/sys/intrinsics.go:35) FUNCDATA $0, gclocals·f207267fbf96a0178e8758c6e3e0ce28(SB)
Sample after:
"".Ctz64 t=1 nosplit size=63 args=0x10 locals=0x0
0x0000 00000 (/Users/josh/go/tip/src/runtime/internal/sys/intrinsics.go:35) TEXT "".Ctz64(SB), NOSPLIT, $0-16
0x0000 00000 (/Users/josh/go/tip/src/runtime/internal/sys/intrinsics.go:35) FUNCDATA $0, gclocals·f207267fbf96a0178e8758c6e3e0ce28(SB)
Observe the additional "nosplit" in the first line
and the additional "NOSPLIT" in the second line.
Updates #15756
Change-Id: I5c59bd8f3bdc7c780361f801d94a261f0aef3d13
Reviewed-on: https://go-review.googlesource.com/40495
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Prevent a crash if the same type in two plugins had a recursive
definition, either by referring to a pointer to itself or a map existing
with the type as a value type (which creates a recursive definition
through the overflow bucket type).
Fixes#19258
Change-Id: Iac1cbda4c5b6e8edd5e6859a4d5da3bad539a9c6
Reviewed-on: https://go-review.googlesource.com/40292
Run-TryBot: Todd Neal <todd@tneal.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The hardware divider is an optional component of ARMv7. This patch
detects whether it is available in runtime and use it or not.
1. The hardware divider is detected at startup and a flag is set/clear
according to a perticular bit of runtime.hwcap.
2. Each call of runtime.udiv will check this flag and decide if
use the hardware division instruction.
A rough test shows the performance improves 40-50% for ARMv7. And
the compatibility of ARMv5/v6 is not broken.
fixes#19118
Change-Id: Ic586bc9659ebc169553ca2004d2bdb721df823ac
Reviewed-on: https://go-review.googlesource.com/37496
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Current code doesn't support floating point #define macros.
This CL compiles floats to a object file and retrive values from it.
That approach is the same work as we've already done for integers.
Updates #18720
Change-Id: I88b7ab174d0f73bda975cf90c5aeb797961fe034
Reviewed-on: https://go-review.googlesource.com/35511
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Without this, the load fails during kernel exec, which results in the
mysterious and completely uninformative "Killed: 9" error.
It appears that the stars (or at least the inputs) were properly aligned
with earlier versions of Xcode so that this happened accidentally.
Make it happen on purpose.
Gregory Man bisected the breakage to this change in LLVM,
which fits the theory nicely:
https://github.com/llvm-mirror/llvm/commit/9a41e59cFixes#19734.
Change-Id: Ice67a09af2de29d3c0d5e3fcde6a769580897c95
Reviewed-on: https://go-review.googlesource.com/38854
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The gold linker is used by default in the Android NDK, except on
arm64:
https://github.com/android-ndk/ndk/issues/148
The Go linker already forces the use of the gold linker on arm and
arm64 (CL 22141) for other reasons. However, the test.bash script in
testcshared doesn't, resulting in linker errors on android/arm64:
warning: liblog.so, needed by ./libgo.so, not found (try using -rpath or
-rpath-link)
Add -fuse-ld=gold when running testcshared on Android. Fixes the
android/arm64 builder.
Change-Id: I35ca96f01f136bae72bec56d71b7ca3f344df1ed
Reviewed-on: https://go-review.googlesource.com/38832
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
POSIX Shell only supports = to compare variables inside '[' tests. But
this is Bash, where == is an alias for =. In practice they're the same,
but the current form is inconsisnent and breaks POSIX for no good
reason.
Change-Id: I38fa7a5a90658dc51acc2acd143049e510424ed8
Reviewed-on: https://go-review.googlesource.com/38031
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Compiler errors now show the exact line and line byte offset (sometimes
called "column") of where an error occured. For `go tool compile x.go`:
package p
const c int = false
//line foo.go:123
type t intg
reports
x.go:2:7: cannot convert false to type int
foo.go:123[x.go:4:8]: undefined: intg
(Some errors use the "wrong" position for the error message; arguably
the byte offset for the first error should be 15, the position of 'false',
rathen than 7, the position of 'c'. But that is an indepedent issue.)
The byte offset (column) values are measured in bytes; they start at 1,
matching the convention used by editors and IDEs.
Positions modified by //line directives show the line offset only for the
actual source location (in square brackets), not for the "virtual" file and
line number because that code is likely generated and the //line directive
only provides line information.
Because the new format might break existing tools or scripts, printing
of line offsets can be disabled with the new compiler flag -C. We plan
to remove this flag eventually.
Fixes#10324.
Change-Id: I493f5ee6e78457cf7b00025aba6b6e28e50bb740
Reviewed-on: https://go-review.googlesource.com/37970
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
A typo in the previous revision ("act" instead of "oldact") caused us
to return the sa_flags from the new (or zeroed) sigaction rather than
the old one.
In the presence of a signal handler registered before
runtime.libpreinit, this caused setsigstack to erroneously zero out
important sa_flags (such as SA_SIGINFO) in its attempt to re-register
the existing handler with SA_ONSTACK.
Change-Id: I3cd5152a38ec0d44ae611f183bc1651d65b8a115
Reviewed-on: https://go-review.googlesource.com/37852
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
There are a few problems from change 35494, discovered during testing
of change 37852.
1. I was confused about the usage of n.key in the sema variant, so we
were looping on the wrong condition. The error was not caught by
the TryBots (presumably due to missing TSAN coverage in the BSD and
darwin builders?).
2. The sysmon goroutine sometimes skips notetsleep entirely, using
direct usleep syscalls instead. In that case, we were not calling
_cgo_yield, leading to missed signals under TSAN.
3. Some notetsleep calls have long finite timeouts. They should be
broken up into smaller chunks with a yield at the end of each
chunk.
updates #18717
Change-Id: I91175af5dea3857deebc686f51a8a40f9d690bcc
Reviewed-on: https://go-review.googlesource.com/37867
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
write(2) is defined in unistd.h.
For the iOS builder.
Change-Id: I411ffe81988d8fbafffde89e4732a20af1a63325
Reviewed-on: https://go-review.googlesource.com/37962
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The iOS test harness was recently changed in response to lldb bugs
to replace breakpoints with the SIGUSR2 signal (CL 34926), and to
pass the current directory in the test binary arguments (CL 35152).
Both the signal sending and working directory setup is done from
the go test driver.
However, the new method doesn't work with tests where a C program is
the test driver instead of go test: the current working directory
will not be changed and SIGUSR2 is not raised.
Instead of copying that logic into any C test program, rework the
test harness (again) to move the setup logic to the early runtime
cgo setup code. That way, the harness will run even in the library
build modes.
Then, use the app Info.plist file to pass the working
directory, removing the need to alter the arguments after running.
Finally, use the SIGINT signal instead of SIGUSR2 to avoid
manipulating the signal masks or handlers.
Fixes the testcarchive tests on iOS.
With this CL, both darwin/arm and darwin/arm64 passes all.bash.
This CL replaces CL 34926, CL 35152 as well as the fixup CL
35123 and CL 35255. They are reverted in CLs earlier in the
relation chain.
Change-Id: I8485c7db1404fbd8daa261efd1ea89e905121a3e
Reviewed-on: https://go-review.googlesource.com/36090
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This reverts commit 333f764df3.
Replaced by a improved strategy later in the CL relation chain.
Change-Id: I70a1d2f0aa5aa0d3d0ec85b5a956c6fb60d88908
Reviewed-on: https://go-review.googlesource.com/36069
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This reverts commit 593ea3b360.
Replaced by a improved strategy later in the CL relation chain.
Change-Id: I6963e4d1bf38e7028cf545a953e28054d83548
Change-Id: I6963e4d1bf38e7028cf545a953e28054d8354870
Reviewed-on: https://go-review.googlesource.com/36067
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This reverts commit 467109bf56.
Replaced by a improved strategy later in the CL relation chain.
Change-Id: Ib90813b5a6c4716b563c8496013d2d57f9c022b8
Reviewed-on: https://go-review.googlesource.com/36066
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Import the github.com/google/pprof and github.com/ianlancetaylor/demangle
packages, without modification.
Build the golang version of pprof from cmd/pprof/pprof.go
by importing the packages from src/cmd/vendot/github.com/google/pprof
The versions upstreamed are:
github.com/ianlancetaylor/demangle 4883227f66371e02c4948937d3e2be1664d9be38
github.com/google/pprof 7eb5ba977f28f2ad8dd5f6bb82cc9b454e123cdc
Update misc/nacl/testzip.proto for new tests.
Change-Id: I076584856491353607a3b98b67d0ca6838be50d6
Reviewed-on: https://go-review.googlesource.com/36798
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This ensures that SIGPROF is handled correctly when using
runtime/pprof in a c-archive or c-shared library.
Separate profiler handling into pre-process changes and per-thread
changes. Simplify the Windows code slightly accordingly.
Fixes#18220.
Change-Id: I5060f7084c91ef0bbe797848978bdc527c312777
Reviewed-on: https://go-review.googlesource.com/34018
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
Before this CL, Go programs in c-archive or c-shared buildmodes
would not handle SIGPIPE. That leads to surprising behaviour where
writes on a closed pipe or socket would raise SIGPIPE and terminate
the program. This CL changes the Go runtime to handle
SIGPIPE regardless of buildmode. In addition, SIGPIPE from non-Go
code is forwarded.
This is a refinement of CL 32796 that fixes the case where a non-default
handler for SIGPIPE is installed by the host C program.
Fixes#17393
Change-Id: Ia41186e52c1ac209d0a594bae9904166ae7df7de
Reviewed-on: https://go-review.googlesource.com/35960
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TestMain doesn't make use of any flags.
Change-Id: I98ec582fb004045a5067618f605ccfeb1f9f4bbb
Reviewed-on: https://go-review.googlesource.com/33613
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Tests that use TestMain might never call m.Run(), and simply return
from TestMain. In that case, the iOS test harness never sees the
PASS from the testing framework and assumes the test failed.
Allow an exit with exit code 0 to also mean test success, thereby
fixing the objdump test on iOS.
Change-Id: I1fe9077b05931aa0905e41b88945cd153c5b35b6
Reviewed-on: https://go-review.googlesource.com/36065
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If -test.timeout is not specified to go test, it will time out after
a default 10 minutes.
The iOS exec wrapper also contains a fail safe timeout mechanism for
a stuck device. However, if no explicit -test.timeout is specified,
it will use a timeout of 0, plus some constant amount.
Use the same default timeout in the exec wrapper as for go test,
10 minutes.
Change-Id: I6465ccd9f7b9ce08fa302e6697f7938a0ea9af34
Reviewed-on: https://go-review.googlesource.com/36062
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The iOS exec wrapper use the constant bundle id "golang.gotest" for
running Go programs on iOS. However, that only happens to work on
the old iOS builders where their provisioning profile covers
that bundle id.
Expand the detection script to list all available provisioning
profiles for the attached device and include the bundle id in the
GOIOS_APP_ID environment variable.
To allow the old builders to continue, the "golang.gotest" bundle
id is used as a fallback if only the app id prefix is specified in
GOIOS_APP_ID.
For the new builders.
Change-Id: I8baa1d4d57f845de851c3fad3f178e05e9a01b17
Reviewed-on: https://go-review.googlesource.com/36060
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On (at least) macOS 10.12, the `security cms` subcommand used by the
iOS detection script will output an error to stderr. The command
otherwise succeeds, but the extra line confuses a later parsing step.
To fix it, use only stdout and ignore stderr from every command run
by detect.go.
For the new iOS builders.
Change-Id: Iee426da7926d7f987ba1be061fa92ebb853ef53d
Reviewed-on: https://go-review.googlesource.com/36059
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Modules appear in the moduledata linked list in the order they are
loaded by the dynamic loader, with one exception: the
firstmoduledata itself the module that contains the runtime.
This is not always the first module (when using -buildmode=shared,
it is typically libstd.so, the second module).
The order matters for typelinksinit, so we swap the first module
with whatever module contains the main function.
Updates #18729
This fixes the test case extracted with -linkshared, and now
go test -linkshared encoding/...
passes. However the original issue about a plugin failure is not
yet fixed.
Change-Id: I9f399ecc3518e22e6b0a350358e90b0baa44ac96
Reviewed-on: https://go-review.googlesource.com/35644
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is needed for typical tests with gccgo, as it passes the
LD_LIBRARY_PATH environment variable to the new program.
Change-Id: I9bf4b0dbdff63f5449c7fcb8124eaeab10ed7f34
Reviewed-on: https://go-review.googlesource.com/35481
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
With GCC 7 (not yet released), cgo fails with errors like
./sigaltstack.go:65:8: call of non-function C.restoreSignalStack
I do not know precisely why. Explicitly declaring that there are no
arguments to the static function is a simple fix for the debug info.
Change-Id: Id96e1cb1e55ee37a9f1f5ad243d7ee33e71584ac
Reviewed-on: https://go-review.googlesource.com/35480
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We already do this for shared libraries. Do it for plugins also.
Suggestions on how to test this would be welcome.
I'd like to get this in for 1.8. It could lead to mysterious
hangs when using plugins.
Fixes#18676
Change-Id: I03209b096149090b9ba171c834c5e59087ed0f92
Reviewed-on: https://go-review.googlesource.com/35117
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
The working directory is now adjusted to match the typical Go test
working directory in main, as the old trick for adjusting earlier
stopped working with the latest version of LLDB bugs.
That means the small number of places where testdata files are
read before main is called no longer work. This CL adjusts those
reads to happen after main is called. (This has the bonus effect of
not reading some benchmark testdata files in all.bash.)
Fixes compress/bzip2, go/doc, go/parser, os, and time package
tests on the iOS builder.
Change-Id: If60f026aa7848b37511c36ac5e3985469ec25209
Reviewed-on: https://go-review.googlesource.com/35255
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Another change in behvaior (bug) in LLDB. Despite the fact that
LLDB can dump the symtab of our test binaries and show the function
addresses, it can no longer call the functions. This means the chdir
trick on signal is failing.
This CL uses a new trick. For iOS, the exec script passes the change
in directory as an argument, and it is processed early by the test
harness generated by cmd/go.
For the iOS builders.
Change-Id: I8f5d0f831fe18de99f097761f89c5184d5bf2afb
Reviewed-on: https://go-review.googlesource.com/35152
Reviewed-by: Elias Naur <elias.naur@gmail.com>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make sure that the same type and itab generated in two
different plugins are actually the same thing.
See also CL 35115
Change-Id: I0c1ecb039d7e2bf5a601d58dfa162a435ae4ef76
Reviewed-on: https://go-review.googlesource.com/35116
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The iOS test harness has set a breakpoint early in the life of Go
programs so that it can change the current working directory using
information only available from the host debugger. Somewhere in the
upgrade to iOS 10 / XCode 8.2, breakpoints stopped working. This
may be an LLDB bug, or a bug in the ios-deploy LLDB scripts, it's
not clear.
Work around the problem by giving up on breakpoints. Instead, early
in the life of every test binary built for iOS, send (and ignore) a
SIGUSR2 signal. The debugger will catch this, giving the script
go_darwin_arm_exec a chance to change the working directory.
For the iOS builders.
Change-Id: I7476531985217d0c76bc176904c48379210576c2
Reviewed-on: https://go-review.googlesource.com/34926
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make sure that the same type and itab generated in two
different shared library are actually the same thing.
Change-Id: Ica45862d65ff8bc7ad04d59a41f57223f71224cd
Reviewed-on: https://go-review.googlesource.com/35115
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Xcode 8.0 has been donen't support the iOS 5 anymore
Fixes#18390.
Change-Id: Icc97e09424780c610a8fe173d0cf461d76b06da4
Reviewed-on: https://go-review.googlesource.com/34673
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Wait longer in case the system is heavily loaded.
Fixes#18324.
Change-Id: If9a6da1cf32d0321302d244ee24fb3f80e54489d
Reviewed-on: https://go-review.googlesource.com/34653
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
golang.org/issue/17594 was caused by additab being called more than once for
an itab. golang.org/cl/32131 fixed that by making the itabs local symbols,
but that in turn causes golang.org/issue/18252 because now there are now
multiple itab symbols in a process for a given (type,interface) pair and
different code paths can end up referring to different itabs which breaks
lots of reflection stuff. So this makes itabs global again and just takes
care to only call additab once for each itab.
Fixes#18252
Change-Id: I781a193e2f8dd80af145a3a971f6a25537f633ea
Reviewed-on: https://go-review.googlesource.com/34173
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Confirm that a trivial executable can build and execute using
-fsanitize=memory.
Fixes#18335 (by skipping the tests when they don't work).
Change-Id: Icb7a276ba7b57ea3ce31be36f74352cc68dc89d5
Reviewed-on: https://go-review.googlesource.com/34505
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This fixes Linux and the *BSD platforms on 386/amd64.
A few OS/arch combinations were already saving registers and/or doing
something that doesn't clearly resemble the SysV C ABI; those have
been left alone.
Fixes#18328.
Change-Id: I6398f6c71020de108fc8b26ca5946f0ba0258667
Reviewed-on: https://go-review.googlesource.com/34501
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Explicitly filter any C-only cgo functions out of pclntable,
which allows them to be duplicated with the host binary.
Updates #18190.
Change-Id: I50d8706777a6133b3e95f696bc0bc586b84faa9e
Reviewed-on: https://go-review.googlesource.com/34199
Reviewed-by: Ian Lance Taylor <iant@golang.org>
