To turn ssa compilation on or off altogether, use
-ssa=1 or -ssa=0. Default is on.
To turn on or off consistency checks, do
-d=ssa/check/on or -d=ssa/check/off. Default is on for now.
Change-Id: I277e0311f538981c8b9c62e7b7382a0c8755ce4c
Reviewed-on: https://go-review.googlesource.com/20217
Reviewed-by: David Chase <drchase@google.com>
Passing copy==1 to syslook is only necessary to support subsequent
calls to substArgTypes. typ2Itab and concatstring* don't have "any"
parameters, so no point in deep copying their function signatures at
every call site.
For a couple other syslook calls (makemap and conv[IET]2[IET]), move
them closer to their corresponding substArgTypes calls so it's easier
to see that all syslook(fn, 1) calls are necessary.
Change-Id: I4a0588ab2b8b5b8ce7a0a44b24c8cf8fda489af6
Reviewed-on: https://go-review.googlesource.com/20215
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The changes to internal/big are completely automatic
by running vendor.bash in that directory.
Also added respective test case.
For #14553.
Change-Id: I98b124bcc9ad9e9bd987943719be27864423cb5d
Reviewed-on: https://go-review.googlesource.com/20199
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When a big.Float is converted to a denormal float32/64, the rounding
precision depends on the size of the denormal. Rounding may round up
and thus change the size (exponent) of the denormal. Recompute the
correct precision again for correct placement of the mantissa.
Fixes#14553.
Change-Id: Iedab5810a2d2a405cc5da28c6de7be34cb035b86
Reviewed-on: https://go-review.googlesource.com/20198
Reviewed-by: Alan Donovan <adonovan@google.com>
Good riddance to another one-off linked list type.
Change-Id: Idf9926a701ab4da8a022be1d61f1257020d58fc5
Reviewed-on: https://go-review.googlesource.com/20212
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is mostly changing the opXXX helpers to take an int16 (matching Prog.As)
argument and return a uint32. The only bit that's not completely trivial is
passing -p.As to opirr to signal operating on a shifted constant, because AADD
+ ALAST overflows int16.
Change-Id: I69133800bbe41c38fa4a89bbbf49823043b3419c
Reviewed-on: https://go-review.googlesource.com/20182
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL addresses some issues noted during CL 20089.
Change-Id: I4e91a8077c07a571ccc9c004278672eb951c5104
Reviewed-on: https://go-review.googlesource.com/20181
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dave Cheney <dave@cheney.net>
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The existing implementation returns nil, ErrBufferFull when n > len(b.buf),
now it will return any data in the buffer and ErrBufferFull.
Fixes#14121
Change-Id: Ie52d32ccd80e4078ebfae6e75393c89675959ead
Reviewed-on: https://go-review.googlesource.com/19091
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Move a few local fields all the way to []*Node while I'm at it.
Update #14473.
Change-Id: Ib18360879839ac592f778cf1042f111bdf14add3
Reviewed-on: https://go-review.googlesource.com/20197
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Automated CL prepared by github.com/mdempsky/unconvert, except for
reverting changes to ssa/rewritegeneric.go (generated file) and
package big (vendored copy of math/big).
Change-Id: I64dc4199f14077c7b6a2f334b12249d4a785eadd
Reviewed-on: https://go-review.googlesource.com/20089
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dave Cheney <dave@cheney.net>
cmd/vet's printf checker currently uses a hardcoded map of function
names to expected positions of format strings. We can be a bit more
precise than this by looking up the signature of the function, which
helps when libraries implement functions like Errorf or Logf with
extra arguments like log levels or error codes.
Specifically, the format string param is assumed to be the last string
parameter of the called function.
Fixes#12294.
Change-Id: Icf10ebb819bba91fa1c4109301417042901e34c7
Reviewed-on: https://go-review.googlesource.com/20163
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Also rewrite bexport.go to use nodeSeqIterate.
The new setNodeSeq is a transitional generic function to set either a
NodeList or a slice to either a NodeList or a slice. This should permit
us to flip fields from *NodeList to []*Node, or Nodes, without changing
other code.
Passes toolstash -cmp.
Change-Id: I872cbfe45bc5f432595737c1f6da641c502b1ab6
Reviewed-on: https://go-review.googlesource.com/20194
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The ssa compiler uses the duffcopy and duffzero functions,
which rely on the MOVUPS instructions.
However, this doesn't work on Plan 9, since floating point
operations are not allowed in the note handler.
This change disables the use of duffcopy and duffzero
on Plan 9 in the ssa compiler.
Updates #14605.
Change-Id: I017f8ff83de00eabaf7e146b4344a863db1dfddc
Reviewed-on: https://go-review.googlesource.com/20171
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I tried to write a program to convert *NodeList to Node, but ran into
too many problem cases. I'm backing off and trying a more iterative
approach using interfaces.
This CL adds an interface for iteration over either a *NodeList or a
Nodes. I changed typechecklist to use it, to show how it works. After
NodeList is eliminated, we can change the typechecklist parameter type
to Nodes.
Passes toolstash -cmp.
Change-Id: I5c7593714b020d20868b99151b1e7cadbbdbc397
Reviewed-on: https://go-review.googlesource.com/20190
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL introduces a mergestrings pass after the reachability
analysis to combine all reachable go.string."..." character data
symbols into a single symbol.
Shrinks juju by 1.2mb (1.5%).
Shrinks cmd/go by 0.5% when building without DWARF.
No noticable effect on linker speed.
Change-Id: I2ba3e60bf418f65766bda257f6ca9eea26d895b6
Reviewed-on: https://go-review.googlesource.com/20165
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The listsort function is no longer used, except in a test. Change the
test to use sort.Sort instead.
Change-Id: Ib634705cc1bc3b1d8fc3795bd4ed2894e6abc284
Reviewed-on: https://go-review.googlesource.com/19964
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
No extra buffering is needed to save the encoding
since the left padding can be computed and written out
before the encoding is generated.
Add extra tests to both string and byte slice formatting.
name old time/op new time/op delta
SprintfHexString-2 410ns ± 3% 194ns ± 3% -52.60% (p=0.000 n=20+19)
SprintfHexBytes-2 431ns ± 3% 202ns ± 2% -53.13% (p=0.000 n=18+20)
Change-Id: Ibca4316427c89f834e4faee61614493c7eedb42b
Reviewed-on: https://go-review.googlesource.com/20097
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The ODOTPTRs introduced in CL #19814 don't have field names,
just offsets. The fieldtrack experiment crashes when
examining them. Instead, just ignore them. We'll never track
these fields anyway.
It would be nice to have the runtime type struct build in the
compiler (like we do sudog, for example) so we could use its
fieldnames. Doesn't seem worth it just for this CL.
Change-Id: I5e75024f5a8333eb7439543b3f466ea40213a1b9
Reviewed-on: https://go-review.googlesource.com/20157
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The new Minalign field sets the minimum alignment for all symbols.
This is required for the upcoming s390x port which requires symbols
be 2-byte aligned for efficient relative addressing.
All preexisting architectures have Minalign set to 1 which means
that this commit should have no effect.
I tested values of 2, 4 and 8 on linux amd64 and the tests appear to
pass. Increasing Minalign to 16 appears to break the runtime. I
think this is due to assumptions made about the layout of module
data.
toolstash -cmp on linux amd64 shows no changes due to this commit.
Resolves#14604
Change-Id: I0fe042d52c4e4732eba5fabcd0c31102a2408764
Reviewed-on: https://go-review.googlesource.com/20149
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change consolidates functions and methods related to TCPAddr,
TCPConn and TCPListener for maintenance purpose, especially for
documentation. Also refactors Dial error code paths.
The followup changes will update comments and examples.
Updates #10624.
Change-Id: I3333ee218ebcd08928f9e2826cd1984d15ea153e
Reviewed-on: https://go-review.googlesource.com/20009
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Over the years as more bugs were discovered with the bzip2 library,
new Tests were appended the unit tests and the tests became gnarly.
Clean up the tests to be more consistent with modern Go style in
addition to coalescing common tests into a general version that
iterates over a list of input/output pairs. This has the advantage that
the input, output, and test code are all in the same area, rather than
being sprawled around the test file.
There is no loss of test coverage.
Change-Id: I377ed89378f0b89763d4a56ffc37b22d9c2a369e
Reviewed-on: https://go-review.googlesource.com/20133
Run-TryBot: Joe Tsai <joetsai@digital-static.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
/etc/services is not available on Android. The pure Go implementation
of LookupPort will never succeed on Android. Skipping the test.
Updates #14576.
Change-Id: I707ac24aea3f988656b95b1816ee5c9690106985
Reviewed-on: https://go-review.googlesource.com/20154
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It appears to be a trivial dreg. Unreferenced. Gone.
Change-Id: I4a5ceed48e84254bc8a07fdb04487a18a0edf965
Reviewed-on: https://go-review.googlesource.com/20122
Run-TryBot: Rob Pike <r@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Arch backends already provide us Widthint and Widthptr, which is ample
information to figure out how to define the universal "int", "uint",
and "uintptr" types. No need for providing a generic typedef
mechanism beyond that.
Change-Id: I35c0c17a67c80605a9208b93d77d6960b2cbb17d
Reviewed-on: https://go-review.googlesource.com/20153
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
No performance improvement, but possibly more readable.
Linking juju:
tip: real 0m5.470s user 0m6.131s
this: real 0m5.392s user 0m6.087s
Change-Id: I578e94fbe6c11b19d79034c33b3db31d9689d439
Reviewed-on: https://go-review.googlesource.com/20108
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
All callers already had strings. No need to generate byte slice copies
to work on bytes.
Performance not measured, but probably helps at least a bit.
Change-Id: Iec3230b69724fac68caae7aad46f2ce1504e82e5
Reviewed-on: https://go-review.googlesource.com/20136
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Latest version of gcc (tdm-1) 5.1.0 refuses to compile our code
on windows/386 (see issue for details). Rewrite the code.
Fixes#14328
Change-Id: I70f4f063282bd2958cd2175f3974369dd49dd8dc
Reviewed-on: https://go-review.googlesource.com/20008
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Looks a tiny bit faster, which is a surprise. Probably noise.
Motivation is making the LSym structure a little easier to understand.
Linking juju, best of 10:
before: real 0m4.811s user 0m5.582s
after: real 0m4.611s user 0m5.267s
Change-Id: Idbedaf4a6e6e199036a1bbb6760e98c94ed2c282
Reviewed-on: https://go-review.googlesource.com/20142
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Function bodies are not yet hooked up because the node structure is not
100% correct. This commit establishes that we can correctly write bodies
out and read them in again.
- export and import all exported inlined function bodies:
(export GO_GCFLAGS="-newexport"; sh all.bash) working
- inlined functions are not yet hooked up (just dropped on the floor)
- improved tracing output and error messages
- make mkbuiltin.go work for both textual and binary export data
so we can run tests with the new format
Change-Id: I70dc4de419df1b604389c3747041d6dba8730b0b
Reviewed-on: https://go-review.googlesource.com/16284
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Also stop creating a map for each symbol, as it does not seem to help.
Linking juju:
tip: real 0m5.470s user 0m6.131s
this: real 0m4.811s user 0m5.582s
Change-Id: Ib3d931c996396a00942581770ff32df1eb8d6615
Reviewed-on: https://go-review.googlesource.com/20140
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
uint8(s.b & 0xff) ought to produce same code as uint8(s.b)
but it did not. RLH found this one looking for moles to
whack in the GC code.
Change-Id: I883d68ec7a5746d652712be84a274a11256b3b33
Reviewed-on: https://go-review.googlesource.com/20141
Reviewed-by: Keith Randall <khr@golang.org>
Count only the runes up to the requested precision
to decide where to truncate a string.
Change the loop within truncate to need fewer jumps.
name old time/op new time/op delta
SprintfTruncateString-2 188ns ± 3% 155ns ± 3% -17.43% (p=0.000 n=20+20)
Change-Id: I17ca9fc0bb8bf7648599df48e4785251bbc31e99
Reviewed-on: https://go-review.googlesource.com/20098
Reviewed-by: Rob Pike <r@golang.org>
