A straight conversion from a type T to an interface type I, where T does
not implement I, should always panic with an interface conversion error
that shows the missing method. This was not happening if the conversion
was done once using the comma-ok form (the result would not be OK) and
then again in a straight conversion. Due to an error in the runtime
package the second conversion was failing with a nil pointer
dereference.
Fixes#16130.
Change-Id: I8b9fca0f1bb635a6181b8b76de8c2385bb7ac2d2
Reviewed-on: https://go-review.googlesource.com/24284
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
- Mention RFC 2616 conformation in which the server now only sends one
"Transfer-Encoding" header when "chunked" is explicitly set.
- Mention that a timeout handler now sends a 200 status code on
encountering an empty response body instead of sending back 0.
Change-Id: Id45e2867390f7e679ab40d7a66db1f7b9d92ce17
Reviewed-on: https://go-review.googlesource.com/24250
Reviewed-by: Andrew Gerrand <adg@golang.org>
pecoff.doc (https://goo.gl/ayvckk) in section 5.6 says:
Immediately following the COFF symbol table is the COFF string table.
The position of this table is found by taking the symbol table address
in the COFF header, and adding the number of symbols multiplied by
the size of a symbol.
So it is unclear what to do when symbol table address is 0.
Lets assume executable does not have any string table.
Added new test with executable with no symbol table. The
gcc -s testdata\hello.c -o testdata\gcc-386-mingw-no-symbols-exec.
command was used to generate the executable.
Fixes#16084
Change-Id: Ie74137ac64b15daadd28e1f0315f3b62d1bf2059
Reviewed-on: https://go-review.googlesource.com/24200
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use the same technique as mips64 for these casts (CL 22835).
We could use the FCFIDU instruction for ppc64le however it seems
better to keep it the same as ppc64 for now.
Updates #15539, updates #16004.
Change-Id: I550680e485327568bf3238c4615a6cc8de6438d7
Reviewed-on: https://go-review.googlesource.com/24191
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We haven't used poisonStack since we switched to 1-bit stack maps
(4d0f3a1), but the checks are still there. However, nothing prevents
us from genuinely allocating an object at this address on 32-bit and
causing the runtime to crash claiming that it's found a bad pointer.
Since we're not using poisonStack anyway, just pull it out.
Fixes#15831.
Change-Id: Ia6ef604675b8433f75045e369f5acd4644a5bb38
Reviewed-on: https://go-review.googlesource.com/24211
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Currently zosarch.go is written out in non-deterministic map order.
Sort the keys and write it out in sorted order to make the generated
file contents deterministic.
Change-Id: Id490f0e8665a2c619c5a7a00a30f4fc64f333258
Reviewed-on: https://go-review.googlesource.com/24174
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I verified that the test fails if I undo the change that it tests for.
Updates #14732.
Change-Id: Ib30352580236adefae946450ddd6cd65a62b7cdf
Reviewed-on: https://go-review.googlesource.com/24151
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
The comments describing blocks of Pos/End implementations for various
nodes types are being misinterpreted as documentation for BadDecl,
BadExpr, BadStmt, and ImportSpec's Pos methods.
Change-Id: I935b0bc38dbc13e9305f3efeb437dd3a6575d9a1
Reviewed-on: https://go-review.googlesource.com/24152
Reviewed-by: Robert Griesemer <gri@golang.org>
This is an attempt to get more information for #14809, which seems to
occur rarely.
Updates #14809.
Change-Id: Idbeb136ceb57993644e03266622eb699d2685d02
Reviewed-on: https://go-review.googlesource.com/24110
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Reviewed-by: Austin Clements <austin@google.com>
Fixes#16056.
Change-Id: Ic3343914742713851b8ae969b101521f25e85e7b
Reviewed-on: https://go-review.googlesource.com/24132
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#16063
Change-Id: I2e8695beb657b0aef067e83f086828d8857787ed
Reviewed-on: https://go-review.googlesource.com/24130
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some users don't realize that creating a Context with a CancelFunc
attaches a subtree to the parent, and that that subtree is not released
until the CancelFunc is called or the parent is canceled. Make this
clear early in the package docs, so that people learning about this
package have the right conceptual model.
Change-Id: I7c77a546c19c3751dd1f3a5bc827ad106dd1afbf
Reviewed-on: https://go-review.googlesource.com/24090
Reviewed-by: Alan Donovan <adonovan@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Do run it on the builders, though.
Fixes#15881.
Change-Id: Ie42204d553cb18547ffd6441afc261717bbd9205
Reviewed-on: https://go-review.googlesource.com/24111
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The previous fix was wrong because it had two misunderstandings on
freebsd32 calling convention like the following:
- 32-bit id1 implies that it is the upper half of 64-bit id, indeed it
depends on machine endianness.
- 32-bit ARM calling convension doesn't conform to freebsd32_args,
indeed it does.
This change fixes the bugs and makes blockUntilWaitable work correctly
on freebsd/{386,arm}.
Fixes#16064.
Change-Id: I820c6d01d59a43ac4f2ab381f757c03b14bca75e
Reviewed-on: https://go-review.googlesource.com/24064
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This adds 8 bytes of binary size to every type that has methods. It is
the smallest change I could come up with for 1.7.
Fixes#16037
Change-Id: Ibe15c3165854a21768596967757864b880dbfeed
Reviewed-on: https://go-review.googlesource.com/24070
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I don't see how the call could fail, so, no test. Just a code cleanup in
case it can fail in the future.
Fixes#15987.
Change-Id: If4af0d5e7d19cc8b13fb6a4f7661c37fb0015e83
Reviewed-on: https://go-review.googlesource.com/23860
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
A .syso file may include information that should go into the object file
that is not object code, and should be included even if not using cgo.
The example in the issue is a Windows manifest file.
Fixes#16050.
Change-Id: I1f4f3f80bb007e84d153ca2d26e5919213ea4f8d
Reviewed-on: https://go-review.googlesource.com/24032
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
The dir parameter was removed in https://golang.org/cl/5732045.
Fixes#15503.
Change-Id: I02a6d8317233bea08633715a095ea2514822032b
Reviewed-on: https://go-review.googlesource.com/24011
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <shurcool@gmail.com>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Functions should be declared to end after the last real instruction, not
after the last padding byte. We achieve this by adding the padding while
assembling the text section in the linker instead of adding the padding
to the function symbol in the compiler. This change makes dtrace happy.
TODO: check that this works with external linking
Fixes#15969
Change-Id: I973e478d0cd34b61be1ddc55410552cbd645ad62
Reviewed-on: https://go-review.googlesource.com/24040
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Special case for rewriting OAS inits omitted OASWB, added
that and OAS2FUNC. The special case cannot be default case,
that causes racewalk to fail in horrible ways.
Fixes#16008.
Change-Id: Ie0d2f5735fe9d8255a109597b36d196d4f86703a
Reviewed-on: https://go-review.googlesource.com/23954
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Generate package comment in alldocs.go using line comments rather than
general comments. This scales better, general comments cannot contain the
"*/" character sequence. Line comments do not have any restrictions on
the comment text that can be contained.
Remove the dependency on sed, which is not cross-platform, not go-gettable
external command.
Remove trailing whitespace from usage string in test.go. It's unnecessary.
Fixes#16030.
Change-Id: I3c0bc9955e7c7603c3d1fb4878218b0719d02e04
Reviewed-on: https://go-review.googlesource.com/23968
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Instead of doing:
x = input
one round of aes on x
x ^= seed
two rounds of aes on x
Do:
x = input
x ^= seed
three rounds of aes on x
This change provides some additional seed-dependent scrambling
which should help prevent collisions.
Change-Id: I02c774d09c2eb6917cf861513816a1024a9b65d7
Reviewed-on: https://go-review.googlesource.com/23577
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On systems that support the POSIX.1-2008 waitid function, we can use it
to block until a wait will succeed. This avoids a possible race
condition: if a program calls p.Kill/p.Signal and p.Wait from two
different goroutines, then it is possible for the wait to complete just
before the signal is sent. In that case, it is possible that the system
will start a new process using the same PID between the wait and the
signal, causing the signal to be sent to the wrong process. The
Process.isdone field attempts to avoid that race, but there is a small
gap of time between when wait returns and isdone is set when the race
can occur.
This CL avoids that race by using waitid to wait until the process has
exited without actually collecting the PID. Then it sets isdone, then
waits for any active signals to complete, and only then collects the PID.
No test because any plausible test would require starting enough
processes to recycle all the process IDs.
Update #13987.
Update #16028.
Change-Id: Id2939431991d3b355dfb22f08793585fc0568ce8
Reviewed-on: https://go-review.googlesource.com/23967
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
+ panic with explicit error if no file set it provided
(Not providing a file set is invalid use of the API; panic
is the appropriate action rather than returning an error.)
Fixes#16018.
Change-Id: I207f5b2a2e318d65826bdd9522fce46d614c24ee
Reviewed-on: https://go-review.googlesource.com/24010
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make the documentation for `go get` match the documentation for `go
install`, since `go get` essentially invokes `go install`.
Update #15825.
Change-Id: I374d80efd301814b6d98b86b7a4a68dd09704c92
Reviewed-on: https://go-review.googlesource.com/23925
Reviewed-by: Andrew Gerrand <adg@golang.org>
This patch updates the doc about comments whitespace for the
encoding/csv package to reflect that leading whitespace before
the hash will treat the line as not a comment.
Fixes#13775.
Change-Id: Ia468c75b242a487b4b2b4cd3d342bfb8e07720ba
Reviewed-on: https://go-review.googlesource.com/23302
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When setting $pc, gdb does a backtrace using the current value of $sp,
and it may complain if $sp does not match that $pc (although the
assignment went through successfully).
This happens with ARM SSA backend: when setting $pc it prints
> Cannot access memory at address 0x0
As well as occasionally on MIPS64:
> warning: GDB can't find the start of the function at 0xc82003fe07.
> ...
Setting $sp before setting $pc makes it happy.
Change-Id: Idd96dbef3e9b698829da553c6d71d5b4c6d492db
Reviewed-on: https://go-review.googlesource.com/23940
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The generated code for interface stubs sometimes just messes
with a few of the args and then tail-calls to the target routine.
The args that aren't explicitly modified appear to not be used.
But they are used, by the thing we're tail calling.
Fixes#16016
Change-Id: Ib9b3a8311bb714a201daee002885fcb59e0463fa
Reviewed-on: https://go-review.googlesource.com/23960
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The combination of https://golang.org/cl/23650 and
https://golang.org/cl/23675 did not work--they were tested separately
but not together.
The problem was that 23650 introduced deferred argument checking, and
the deferred function loses the type that 23675 started requiring. The
fix is to go back to using an empty interface type in a deferred
argument check.
No new test required--fixes broken build.
Change-Id: I5ea023c5aed71d70e57b11c4551242d3ef25986d
Reviewed-on: https://go-review.googlesource.com/23961
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
When cgo writes a _cgoCheckPointerN function to handle unsafe.Pointer,
use the function's argument type rather than interface{}. This permits
type errors to be detected at build time rather than run time.
Fixes#13830.
Change-Id: Ic7090905e16b977e2379670e0f83640dc192b565
Reviewed-on: https://go-review.googlesource.com/23675
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
getAbbrs looks like it is checking each month looking for a change
in the time zone abbreviation, but starts in Dec of the previous year
and skips the month of February because of the overflow rules for
AddDate. Changing the day to 1 starts at Jan 1 and tries all months
in the current year. This isn't very important or likely to change
output as zones usually span several months. Discovered when
looking into time.AddDate behavior when adding months.
Change-Id: I685254c8d21c402ba82cc4176e9a86b64ce8f7f7
Reviewed-on: https://go-review.googlesource.com/23322
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change-Id: I68d66fccf9cc8f7137c92b94820ce7d6f478a185
Reviewed-on: https://go-review.googlesource.com/23310
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The test TestGoGetHTTPS404 downloads a package that does not build on
every OS, so change it to only run where the package builds. It's not
great for the test to depend on an external package, but this is an
improvement on the current situation.
Fixes#15644.
Change-Id: I1679cee5ab1e61a5b26f4ad39dc8a397fbc0da69
Reviewed-on: https://go-review.googlesource.com/23920
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
This matches the behavior of the legacy backend.
Fixes#15975 (if this is the intended behavior)
Change-Id: Id277959069b8b8bf9958fa8f2cbc762c752a1a19
Reviewed-on: https://go-review.googlesource.com/23820
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
R13 needs to be set to g because C code may have clobbered R13.
Fixes#16006.
Change-Id: I66311fe28440e85e589a1695fa1c42416583b4c6
Reviewed-on: https://go-review.googlesource.com/23910
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Before, the Android exec wrapper expected the trailing exit code
output on its own line, like this:
PASS
exitcode=0
However, some tests can sometimes squeeze in some output after
the test harness outputs "PASS" and the newline. The
TestWriteHeapDumpFinalizers test is particularly prone to this,
since its finalizers println to standard out. When it happens, the
output looks like this:
PASS
finalizedexitcode=0
Two recent failures caused by this race:
https://build.golang.org/log/185605e1b936142c22350eef22d20e982be53c29https://build.golang.org/log/e61cf6a050551d10360bd90be3c5f58c3eb07605
Since the "exitcode=" string is always echoed after the test output,
the fix is simple: instead of looking for the last newline in the
output, look for the last exitcode string instead.
Change-Id: Icd6e53855eeba60b982ad3108289d92549328b86
Reviewed-on: https://go-review.googlesource.com/23750
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
