Support external linking for the new reloc pass as well, and
enable it on AMD64 and 386.
Change-Id: Ia71aec3d7c14e9d661e0748d2e988f29f220d1e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/230308
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Remove 'Sub' field from sym.Symbol, replacing uses (those downstream of
loadlibfull) with loader method calls.
NB: removing the Outer field will have to wait for now; it is accessed
in archreloc methods that don't have access to link ctxt or loader
currently.
Change-Id: I2abe5906fc169c64b2ab7d5ad213619bea5a17c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/230617
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Convert some optimizations rules to strongly-typed versions. Similar to
CL 230338, this CL only converts rules that need no additional changes
(i.e: only need to change '->' to '=>').
This CL covers the rules from line 800 - 1219.
Passes toolstash-check
Change-Id: I94181a809fa38918b78301f1c0c680b7a8ab552f
Reviewed-on: https://go-review.googlesource.com/c/go/+/230738
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Only enabled for AMD64 when internal linking for now.
Change-Id: I2aa9ee47c0f7413ea7bbcdd31b8317c14220bba3
Reviewed-on: https://go-review.googlesource.com/c/go/+/230302
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Previously, looking up only IPv4 or IPv6 addresses was only possible
with DefaultResolver via ResolveIPAddr. Add this functionality to the
Resolver type with a new method, LookupIP. This largely brings Resolver
functionally to parity with the global functions. The name LookupIP is
used over ResolveIPAddr to be consistent with the other Resolver
methods.
There are two main benefits to (*Resolver).LookupIP over
(*Resolver).LookupHost. First is an ergonomic benefit. Wanting a
specific family of address is common enough to justify a method, evident
by the existence of ResolveIPAddr. Second, this opens the possibility of
not performing unnecessary DNS requests when only a specific family of
addresses are needed. This optimization is left to follow up work.
Updates #30452
Change-Id: I241f61019588022a39738f8920b0ddba900cecdd
Reviewed-on: https://go-review.googlesource.com/c/go/+/228641
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Allocate the runcases slice on the stack if the number
of select cases is small (up to 4).
Found while looking at production profiles of common
proto based RPC server framework code in Google which do
not have a large number of cases.
name old time/op new time/op delta
Select/1 147ns ± 2% 120ns ± 6% -18.32% (p=0.000 n=7+10)
Select/4 316ns ± 5% 249ns ± 2% -21.23% (p=0.000 n=10+10)
Select/8 516ns ± 3% 515ns ± 3% ~ (p=0.858 n=10+9)
name old alloc/op new alloc/op delta
Select/1 96.0B ± 0% 64.0B ± 0% -33.33% (p=0.000 n=10+10)
Select/4 336B ± 0% 208B ± 0% -38.10% (p=0.000 n=10+10)
Select/8 672B ± 0% 672B ± 0% ~ (all equal)
name old allocs/op new allocs/op delta
Select/1 4.00 ± 0% 3.00 ± 0% -25.00% (p=0.000 n=10+10)
Select/4 7.00 ± 0% 6.00 ± 0% -14.29% (p=0.000 n=10+10)
Select/8 11.0 ± 0% 11.0 ± 0% ~ (all equal)
Change-Id: I1687e74fc8e86606a27f03fa8a561bcfb68775d6
Reviewed-on: https://go-review.googlesource.com/c/go/+/230657
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Opening a connection with Connect should still create a derived
context with a timeout because some clients will not use a timeout
and the connection pool may open a connection asynchronously.
Likewise, if a connection close makes a network operation it should
provide some type of sane timeout for the operation.
Fixes#38185
Change-Id: I9b7ce2996c81c486170dcc84b12672a99610fa27
Reviewed-on: https://go-review.googlesource.com/c/go/+/230438
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
CL 220499 started marking readonly syms as SRODATA earlier,
so we can use that in the writebarrier pass now.
Passes toolstash-check.
Change-Id: Ic4d49714b8bffbe03c8e9a75ca96df4475bae732
Reviewed-on: https://go-review.googlesource.com/c/go/+/230559
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Remove the "ElfSym" and "LocalElfSym" fields from sym.Symbol,
replacing uses with loader method calls as needed.
Change-Id: I3828f13203ece2bdc03eeb09ab37a5c94e21a726
Reviewed-on: https://go-review.googlesource.com/c/go/+/230462
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Remove sym.Symbol 'Unit' field, replacing accesses to the field with
calls into the loader instead.
Change-Id: Ia1abd4c3d93036705dd624a49cb3d9cbe6a5188b
Reviewed-on: https://go-review.googlesource.com/c/go/+/230307
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Add new get/set methods to the loader for recording the ELF symbol
index for a given loader symbol. These are map-based, since it is
expected that many/most symbols will not need an ELF symbol table
entry.
Change-Id: I1102c3637775515ccc6650118e8b059468a2c3ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/230461
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Remove the 'Gotype' field from sym.Symbol, as it is now no longer
used. Store the loader.Sym for a symbol as a field in sym.Symbol
("SymIdx"). Then remove sym.Symbol 'File' field, and replace the field
accesses in question with calls into the loader instead.
Change-Id: I01c5504425006b8d3fe77fac2b69a86e198c7a5a
Reviewed-on: https://go-review.googlesource.com/c/go/+/230304
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
None of the users of genasmsym are doing anything with the Gotype
field of sym.Symbol, so remove that param from the callback function.
Change-Id: Ie902c4cdbcc6b68d353daf5ce21a99012161a946
Reviewed-on: https://go-review.googlesource.com/c/go/+/230545
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The span set data structure may leak blocks due to a race in the logic
to check whether it's safe to free a block. The simplest example of this
race is between two poppers:
1. Popper A claims slot spanSetEntries-2.
2. Popper B claims slot spanSetEntries-1.
3. Popper A gets descheduled before it subtracts from block.used.
4. Popper B subtracts from block.used, sees that claimed
spanSetEntries-1, but also that block.used != 0, so it returns.
5. Popper A comes back and subtracts from block.used, but it didn't
claim spanSetEntries-1 so it also returns.
The spine is left with a stale block pointer and the block later gets
overwritten by pushes, never to be re-used again.
The problem here is that we designate the claimer of slot
spanSetEntries-1 to be the one who frees the block, but that may not be
the thread that actually does the last subtraction from block.used.
Fixing this problem is tricky, and the fundamental problem there is that
block.used is not stable: it may be observed to be zero, but that
doesn't necessarily mean you're the last popper!
Do something simpler: keep a counter of how many pops have happened to a
given block instead of block.used. This counter monotonically increases
when a pop is _completely done_. Because this counter is monotonically
increasing, and only increases when a popper is done, then we know for
sure whichever popper is the last to increase it (i.e. its value is
spanSetBlockEntries) is also the last popper in the block. Because the
race described above still exists, the last popper may not be the one
which claimed the last slot in the block, but we know for certain nobody
else is popping from that block anymore so we can safely free it.
Finally, because pops serialize with pushes to the same slot, we need
not worry about concurrent pushers at all.
Updates #37487.
Change-Id: I6697219372774c8ca7d8ee6895eaa230a64ce9e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/230497
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make Wasm more like other architectures, writing data sections to
heap in Asmb instead of Asmb2. Then we can remove the
copy-on-write logic in applying relocations.
Change-Id: I26d5315ea9fba032fe4bdb9b5c7fe483611c4373
Reviewed-on: https://go-review.googlesource.com/c/go/+/230465
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Currently mcaches are flushed to mcentral after a bunch of memstats have
already been read. This is not safe (in the sense that it doesn't ensure
consisent memstats) since memstats may in general change when mcentral
data structures are manipulated.
Note that prior to the new mcentral implementation this was not a
problem because mcentral operations happened to never modify certain
memstats. As of the new mcentral implementation, we might for example
persistentalloc when uncaching a span, which would change memstats. This
can cause a skew between the value of sys (which currently is calculated
before mcaches are flushed) and the value of gc_sys and other_sys.
Fix this by moving mcache flushing to the very top of updatememstats.
Also leave a comment explaining that this must be done first, in
general, because mcentrals make no guarantee that they will not
influence memstats (and doing so would be unnecessarily restrictive).
Fixes#38712.
Change-Id: I15bacb313c54a46e380a945a71bb75db67169c1b
Reviewed-on: https://go-review.googlesource.com/c/go/+/230498
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
This change is just the mechanical work of moving the wavefront past
address.
Change-Id: I519ec49fa8ba50760c7d23fc084fcd3bb0544546
Reviewed-on: https://go-review.googlesource.com/c/go/+/229700
Run-TryBot: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is a second attempt at CL 230024, with
cmd/go/testdata/script/mod_retention.txt updated to perform a
version-independent comparison on the 'go' version added to a go.mod
file that lacks one.
Fixes#38708
Change-Id: I15dcd83b51ed5ec57946b419bcbaec41e85a46f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/230382
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
This reverts CL 229994.
Reason for revert: break AIX build.
This is nice to have but isn't critical. We can revisit later.
Change-Id: Ifc56a0a4c0fb36859cf7666ab149e25e0e5d4cc0
Reviewed-on: https://go-review.googlesource.com/c/go/+/230459
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
ctxt.Tlsg2 is supposed to be the embedded ArchSyms.Tlsg2.
Change-Id: I4f9711f83999d4a98bcf6d99c24fab756c580905
Reviewed-on: https://go-review.googlesource.com/c/go/+/230379
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Convert some optimizations rules to strongly-typed versions. So far, I
have only converted the rules that need no additional changes (i.e: only
need to change '->' to "=>").
This CL covers the rules from line 478 - line 800 in S390X.rules file.
Some compare and branch rules also fall in this range, but they were
already done previously in another CL.
Passes toolstash-check.
Change-Id: I9167c5f1a32f4fd6c29bacc13fff95e83b0533e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/230338
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The compiler has better error messages for methods called without a
pointer receiver when one is expected. This change is similar to
CL 229801, but for method calls.
Also, added better error messages for functions called with the wrong
capitalization. I left the third TODO in this switch statement almost
as-is because I'm not sure that the extra complexity is worth it -
I adjusted the error to look like the one the compiler reports.
Fixesgolang/go#38658
Change-Id: Ie0ca2503e12f3659f112f0135cc27db1b027fdcb
Reviewed-on: https://go-review.googlesource.com/c/go/+/230380
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Linux 4.5 introduced (and Linux 5.3 refined) the copy_file_range
system call, which allows file systems the opportunity to implement
copy acceleration techniques. This commit adds support for
copy_file_range(2) to the os package.
Introduce a new ReadFrom method on *os.File, which makes *os.File
implement the io.ReaderFrom interface. If dst and src are both files,
this enables io.Copy(dst, src) to call dst.ReadFrom(src), which, in
turn, will call copy_file_range(2) if possible. If copy_file_range(2)
is not supported by the host kernel, or if either of dst or src
refers to a non-regular file, ReadFrom falls back to the regular
io.Copy code path.
Add internal/poll.CopyFileRange, which acquires locks on the
appropriate poll.FDs and performs the actual work, as well as
internal/syscall/unix.CopyFileRange, which wraps the copy_file_range
system call itself at the lowest level.
Rework file layout in internal/syscall/unix to accomodate the
additional system call numbers needed for copy_file_range.
Merge these definitions with the ones used by getrandom(2) into
sysnum_linux_$GOARCH.go files.
A note on additional optimizations: if dst and src both refer to pipes
in the invocation dst.ReadFrom(src), we could, in theory, use the
existing splice(2) code in package internal/poll to splice directly
from src to dst. Attempting this runs into trouble with the poller,
however. If we call splice(src, dst) and see EAGAIN, we cannot know
if it came from src not being ready for reading or dst not being
ready for writing. The write end of src and the read end of dst are
not under our control, so we cannot reliably use the poller to wait
for readiness. Therefore, it seems infeasible to use the new ReadFrom
method to splice between pipes directly. In conclusion, for now, the
only optimization enabled by the new ReadFrom method on *os.File is
the copy_file_range optimization.
Fixes#36817.
Change-Id: I696372639fa0cdf704e3f65414f7321fc7d30adb
Reviewed-on: https://go-review.googlesource.com/c/go/+/229101
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
IntSize is an untyped constant that does not need explicit conversion.
Annotating IntSize as an int and running github.com/mdempsky/unconvert
reveals these two cases.
Fixes#38682.
Change-Id: I014646b7457ddcde32474810153229dcf0c269c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/230306
Run-TryBot: Akhil Indurti <aindurti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently allocToCache assumes it can move the search address past the
block it allocated the cache from, which violates the property that
searchAddr should always point to mapped memory (i.e. memory represented
by pageAlloc.inUse).
This bug was already fixed once for pageAlloc.alloc in the Go 1.14
release via CL 216697, but that changed failed to take into account
allocToCache.
Fixes#38605.
Change-Id: Id08180aa10d19dc0f9f551a1d9e327a295560dff
Reviewed-on: https://go-review.googlesource.com/c/go/+/229577
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Originally, we use an assembly function that returns a boolean result to
tell whether the machine has vector facility or not. It is now no longer
needed when we can directly use cpu.S390X.HasVX variable. This CL
also removes the last occurence of hasVectorFacility function on s390x.
Change-Id: Id20cb746c21eacac5e13344b362e2d87adfe4317
Reviewed-on: https://go-review.googlesource.com/c/go/+/230337
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
symGroupType was needed for dodata. Now that we have converted
dodata to using the loader, stop overwriting it.
Change-Id: Ie94109c0b35dd2f71a19ebb38f8cf20b6a37c624
Reviewed-on: https://go-review.googlesource.com/c/go/+/229994
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
In dodata we overwrite symbol types to SDATA. Now we'll stop
doing that, so accept more symbol types here. This is basically
a list of all writeable types handled in dodata that could appear
in XCOFF.
Change-Id: Iee35369162f5acd59806a3f0e6c8d3682620067e
Reviewed-on: https://go-review.googlesource.com/c/go/+/230310
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Originally, we use an assembly function that returns a boolean result to
tell whether the machine has vector facility or not. It is now no longer
needed when we can directly use cpu.S390X.HasVX variable.
Change-Id: Ic1dae851982532bcfd9a9453416c112347f21d87
Reviewed-on: https://go-review.googlesource.com/c/go/+/230318
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Originally, we use an assembly function that returns a boolean result to
tell whether the machine has vector facility or not. It is now no longer
needed when we can directly use cpu.S390X.HasVX variable.
Change-Id: Ic3ffeb9e63238ef41406d97cdc42502145ddb454
Reviewed-on: https://go-review.googlesource.com/c/go/+/230319
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL allows the usage of KDSA instruction when it is available. The
instruction is designed to be resistant to side channel attacks and
offers performance improvement for ed25519.
Benchmarks:
name old time/op new time/op delta
Signing-8 120µs ±20% 62µs ±12% -48.40% (p=0.000 n=10+10)
Verification-8 325µs ±17% 69µs ±10% -78.80% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
Signing-8 448B ± 0% 0B -100.00% (p=0.000 n=10+10)
Verification-8 288B ± 0% 0B -100.00% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
Signing-8 5.00 ± 0% 0.00 -100.00% (p=0.000 n=10+10)
Verification-8 2.00 ± 0% 0.00 -100.00% (p=0.000 n=10+10)
Change-Id: I0330ce83d807370b419ce638bc2cae4cb3c250dc
Reviewed-on: https://go-review.googlesource.com/c/go/+/202578
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
This reverts CL 33677.
Reason for revert: NetBSD is broken
Updates #38649
Change-Id: Id60e3c97d3cb4fb0053dea03b95dbbb0b850c883
Reviewed-on: https://go-review.googlesource.com/c/go/+/230038
Run-TryBot: Andrew Bonventre <andybons@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Several new ones came from my testing (long, repeated runs) and one (assistQueue ->
spine) came from the staticlockranking builder (filed as issue 38441).
Fixes#38441
Change-Id: I4268da0d8b8cc51251eba6bd936110c8ab4c4e61
Reviewed-on: https://go-review.googlesource.com/c/go/+/229480
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Currently, the small object sweeper will sweep until it finds a free
slot or there are no more spans of that size class to sweep. In dense
heaps, this can cause sweeping for a given size class to take
unbounded time, and gets worse with larger heaps.
This CL limits the small object sweeper to try at most 100 spans
before giving up and allocating a fresh span. Since it's already shown
that 100 spans are completely full at that point, the space overhead
of this fresh span is at most 1%.
This CL is based on an experimental CL by Austin Clements (CL 187817)
and is updated to be part of the mcentral implementation, gated by
go115NewMCentralImpl.
Updates #18155.
Change-Id: I37a72c2dcc61dd6f802d1d0eac3683e6642b6ef8
Reviewed-on: https://go-review.googlesource.com/c/go/+/229998
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Currently mcentral is implemented as a couple of linked lists of spans
protected by a lock. Unfortunately this design leads to significant lock
contention.
The span ownership model is also confusing and complicated. In-use spans
jump between being owned by multiple sources, generally some combination
of a gcSweepBuf, a concurrent sweeper, an mcentral or an mcache.
So first to address contention, this change replaces those linked lists
with gcSweepBufs which have an atomic fast path. Then, we change up the
ownership model: a span may be simultaneously owned only by an mcentral
and the page reclaimer. Otherwise, an mcentral (which now consists of
sweep bufs), a sweeper, or an mcache are the sole owners of a span at
any given time. This dramatically simplifies reasoning about span
ownership in the runtime.
As a result of this new ownership model, sweeping is now driven by
walking over the mcentrals rather than having its own global list of
spans. Because we no longer have a global list and we traditionally
haven't used the mcentrals for large object spans, we no longer have
anywhere to put large objects. So, this change also makes it so that we
keep large object spans in the appropriate mcentral lists.
In terms of the static lock ranking, we add the spanSet spine locks in
pretty much the same place as the mcentral locks, since they have the
potential to be manipulated both on the allocation and sweep paths, like
the mcentral locks.
This new implementation is turned on by default via a feature flag
called go115NewMCentralImpl.
Benchmark results for 1 KiB allocation throughput (5 runs each):
name \ MiB/s go113 go114 gotip gotip+this-patch
AllocKiB-1 1.71k ± 1% 1.68k ± 1% 1.59k ± 2% 1.71k ± 1%
AllocKiB-2 2.46k ± 1% 2.51k ± 1% 2.54k ± 1% 2.93k ± 1%
AllocKiB-4 4.27k ± 1% 4.41k ± 2% 4.33k ± 1% 5.01k ± 2%
AllocKiB-8 4.38k ± 3% 5.24k ± 1% 5.46k ± 1% 8.23k ± 1%
AllocKiB-12 4.38k ± 3% 4.49k ± 1% 5.10k ± 1% 10.04k ± 0%
AllocKiB-16 4.31k ± 1% 4.14k ± 3% 4.22k ± 0% 10.42k ± 0%
AllocKiB-20 4.26k ± 1% 3.98k ± 1% 4.09k ± 1% 10.46k ± 3%
AllocKiB-24 4.20k ± 1% 3.97k ± 1% 4.06k ± 1% 10.74k ± 1%
AllocKiB-28 4.15k ± 0% 4.00k ± 0% 4.20k ± 0% 10.76k ± 1%
Fixes#37487.
Change-Id: I92d47355acacf9af2c41bf080c08a8c1638ba210
Reviewed-on: https://go-review.googlesource.com/c/go/+/221182
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
