This accidentally got committed - please review the whole paragraph
as if it was new.
Change-Id: I98e1db4670634c6e792d26201ce0cd329a6928b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/202579
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Previously we would always “upgrade” to the semantically-highest
version, even if a newer compatible version exists.
That made certain classes of mistakes irreversible: in general we
expect users to address bad releases by releasing a new (higher)
version, but if the bad release was an unintended +incompatible
version, then no release that includes a go.mod file can ever have a
higher version, and the bad release will be treated as “latest”
forever.
Instead, when considering a +incompatible version we now consult the
latest compatible (v0 or v1) release first. If the compatible release
contains a go.mod file, we ignore the +incompatible releases unless
they are expicitly requested (by version, commit ID, or branch name).
Fixes#34165
Updates #34189
Change-Id: I7301eb963bbb91b21d3b96a577644221ed988ab7
Reviewed-on: https://go-review.googlesource.com/c/go/+/204440
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
We had some issues with reports being marked as spam, so I added a
filter to never mark as spam something that mentions the word
"vulnerability". We get too much spam at that address to disable the
filter entirely, so instead meantion the bypass in the docs.
Change-Id: Idb4dabcf51a9dd8234a2d571cd020c970b0a582c
Reviewed-on: https://go-review.googlesource.com/c/go/+/205538
Reviewed-by: Katie Hockman <katie@golang.org>
This change updates the GOARCH/GOOS discussion at the top of the
"Installing Go from source" document to better reflect the current
status. In particular:
- The GOARCH list now focuses on simply listing the supported
architectures, with no notes about their supposed "maturity", since
the same GOARCH can be mature on a GOOS and not so mature on another.
- Outdated notes about some archs being new and "not well-exercised"
have been removed in favour of a following list of which ports are
first class.
- The list of supported OS has been updated (added: AIX, Illumos),
and sorted in alphabetical order.
- A note about the runtime support being the same for all ARCHS,
"including garbage collection and efficient array slicing and" etc etc
has been removed, since it doesn't seem particularly relevant in a
"install from source" instruction page, and it's likely a leftover
from the time this doc page was the landing place for new people and
it felt the need to "sell" Go.
Updates #27689Fixes#35009
Change-Id: Ic4eca91dca3135adc7bed4fe00b4f157768f0e81
Reviewed-on: https://go-review.googlesource.com/c/go/+/202197
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
mod_get_svn passes, and I also tested this manually on a real-world svn-hosted package:
example.com$ go mod init example.com
go: creating new go.mod: module example.com
example.com$ GOPROXY=direct GONOSUMDB=llvm.org go get -d llvm.org/llvm/bindings/go/llvm
go: finding llvm.org/llvm latest
go: finding llvm.org/llvm/bindings/go/llvm latest
go: downloading llvm.org/llvm v0.0.0-20191022153947-000000375505
go: extracting llvm.org/llvm v0.0.0-20191022153947-000000375505
example.com$ go list llvm.org/llvm/bindings/...
llvm.org/llvm/bindings/go
llvm.org/llvm/bindings/go/llvm
Fixes#26092
Change-Id: Iefe2151b82a0225c73bb6f8dd7cd8a352897d4c0
Reviewed-on: https://go-review.googlesource.com/c/go/+/203497
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This change adds the -modfile flag to module aware build commands and
to 'go mod' subcommands. -modfile may be set to a path to an alternate
go.mod file to be read and written. A real go.mod file must still
exist and is used to set the module root directory. However, it is not
opened.
When -modfile is set, the effective location of the go.sum file is
also changed to the -modfile with the ".mod" suffix trimmed (if
present) and ".sum" added.
Updates #34506
Change-Id: I2d1e044e18af55505a4f24bbff09b73bb9c908b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/202564
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Sections will be filled in with individual CLs before Go 1.14.
NOTE: This document is currently in Markdown for ease of writing /
reviewing. Before Go 1.14, we will either ensure that x/website
can render Markdown (flavor TBD) or check in a rendered HTML file that
can be displayed directly.
Updates #33637
Change-Id: Icd43fa2bdb7d256b28a56b93214b70343f43492e
Reviewed-on: https://go-review.googlesource.com/c/go/+/202081
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This change adds the '-modcacherw' build flag, which leaves
newly-created directories (but not the files!) in the module cache
read-write instead of making them unwritable.
Fixes#31481
Change-Id: I7c21a53dd145676627c3b51096914ce797991d99
Reviewed-on: https://go-review.googlesource.com/c/go/+/202079
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Some code tags in the HTML were not properly closed. Close them so that
the text is rendered correctly.
Change-Id: I5c2170ffced313417f65004d53518128c34f7979
Reviewed-on: https://go-review.googlesource.com/c/go/+/200117
Reviewed-by: Ian Lance Taylor <iant@golang.org>
'GOFLAGS=-mod=vendor' currently causes 'go get' to always fail unless
the '-mod' flag is explicitly overwritten. Moreover, as of CL 198319
we plan to set -mod=vendor by default if a vendor directory is
present, so all users with vendor directories will be affected — not
just those who set 'GOFLAGS' explicitly.
Similarly, an explicit '-mod=readonly' argument to 'go get' is
currently ignored as a special case, but the fact that it is ignored
(rather than rejected) can be very surprising.
Rather than adding more special cases, we should remove the '-mod'
flag from 'go get' entirely.
Fixes#30345Fixes#32502
Updates #33848
Change-Id: Iecd3233ca3ef580ca3a66bd5e6ee8d86d4cbd8a7
Reviewed-on: https://go-review.googlesource.com/c/go/+/198438
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
In the GOPATH section of the 'How To Write Go Code' document, it is
mentioned two times in the span of a few lines that one can set GOPATH
to a custom workspace path. The two paragraphs say basically the same
thing, and they both link to golang.org/wiki/SettingGOPATH, so I'm
quite sure the duplication is not intentional.
This change deletes the second occurrence.
Change-Id: I16f8bb8657041a23ed272eacf9adbc5637e8e34a
Reviewed-on: https://go-review.googlesource.com/c/go/+/197839
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
This was missing from the original StructOf CL because I couldn't
think of a use for it. Now I can: even with types used entirely
by reflect, unexported fields can be set using UnsafeAddr.
Change-Id: I5e7e3d81d16e8817cdd69d85796ce33930ef523b
Reviewed-on: https://go-review.googlesource.com/c/go/+/85661
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also added a test to ensure that any interactions
between TimeoutHandler and Flusher result in the
correct status code and body, but also that we don't
get superfluous logs from stray writes as was seen
in the bug report.
Fixes#34439.
Change-Id: I4af62db256742326f9353f98a2fcb5f71d2a5fd9
Reviewed-on: https://go-review.googlesource.com/c/go/+/197659
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This was in response to a post-merge review comment in
golang.org/cl/185537
Change-Id: I866b3882c8e83bf1fef60115cff5d1c6a9863f09
Reviewed-on: https://go-review.googlesource.com/c/go/+/186319
Reviewed-by: Andrew Bonventre <andybons@golang.org>
I noticed lots of trailing whitespace in one of cmd/trace's HTML files.
While at it, remove a few others from still-maintained files. Leave old
documents alone, such as doc/devel/weekly.html.
Change-Id: I7de7bbb6dd3fe6403bbb1f1178a8d3640c1e537b
Reviewed-on: https://go-review.googlesource.com/c/go/+/196178
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Update the section in asm.html related to PPC64. Remove the line
that says it is in an experimental state, add a link to the
new doc.go file that has all the detail for the Go assembler for
PPC64.
Change-Id: I45d9891669e01d94e2721be576d572e02cd9d2db
Reviewed-on: https://go-review.googlesource.com/c/go/+/183840
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This skeleton follows the model of CL 174521,
with additions from 'relnote -html'.
Updates #33738
Updates #30439
Change-Id: I0f88ff7f231b7728dca0695143f2f2eda74d60c4
Reviewed-on: https://go-review.googlesource.com/c/go/+/195058
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change updates the status of gccgo 8 and gccgo 9, which are now
released.
It also replaces every instance of two-spaces with one space in text
paragraphs, which is the preferred style in Go documentation.
Fixes#34167
Change-Id: I94a4d85c06281f2623d39a68db7b6c95b5867999
Reviewed-on: https://go-review.googlesource.com/c/go/+/193842
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This saves a redirect and makes the document more consistent.
Change-Id: Ib7f68b1967275c0c676a044314919449680297f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/191537
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
- Add doc to syscall.Errno (and syscall.ErrorString for plan9).
- Mention under `syscall` in release notes.
Fixes#33436.
Change-Id: I032ffebaa76ed67eb9d748e7645ca73f26144ea0
Reviewed-on: https://go-review.googlesource.com/c/go/+/191337
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Document that:
* math/big.Float.Parse
* math/big.Int.SetString
* strconv.ParseFloat
* strconv.ParseInt
* strconv.ParseUint
now accept underscores to group digits only if base = 0,
as per the Go 2 language changes.
Updates #32815
Change-Id: Id45bd803a18442436419739297e8aed0d32ca56c
Reviewed-on: https://go-review.googlesource.com/c/go/+/191077
Reviewed-by: Robert Griesemer <gri@golang.org>
Change-Id: I75619feced842b8ca509ee08e01b63258c5e87ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/190757
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Prior doc implied that "git clone" was one way to obtain a go1.4
bootstrap toochain, but it did not state this outright. Further,
the doc did not make it explicit in the "Fetch the repository"
section that one must necessarily "git clone" a second time in
the (presumed-to-be-uncommon) case where "git clone" had already
been perfomed in the "compiler binaries" section.
Updates #33402
Change-Id: Id70a6587b6ee09aca13559d63868b75cb07dff1e
Reviewed-on: https://go-review.googlesource.com/c/go/+/188900
Reviewed-by: Ian Lance Taylor <iant@golang.org>
And also insert new paragraphs between GOOS and GOARCH listings
for better readability.
Fixes#28142Fixes#26513
Change-Id: Ie92e98dbfd924e80032a12afbfa02f30e3a6f916
Reviewed-on: https://go-review.googlesource.com/c/go/+/189578
Reviewed-by: Andrew Bonventre <andybons@golang.org>
A brief description at the top the Standard Library section of the
changes to support error wrapping.
Fixes#33365.
Change-Id: Id5a3b2fe148d9bfb949f2cfc9e5d8a1613a0e219
Reviewed-on: https://go-review.googlesource.com/c/go/+/188798
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Documents the work from:
* CL 163599
* CL 163737
which now uses the Request.Body's io.ReaderFrom implementation,
if available, and permits system level optimizations such as
"sendfile" to be used to transmit/upload the Body, which greatly
speeds up file uploads.
Updates #33396
Change-Id: I7b8315c4b3e57ad47bb9be2b0c838857875d4bd5
Reviewed-on: https://go-review.googlesource.com/c/go/+/188457
Reviewed-by: Andrew Bonventre <andybons@golang.org>
The Effective Go document references the crypto/cipher Block
interface, but the parameters' names are swapped. This change
alignes them to the crypto definition, to avoid confusion.
Fixes#33432
Change-Id: I8b9aac4dc6af3eec968bbc8f3ee5366b99016fcc
Reviewed-on: https://go-review.googlesource.com/c/go/+/188797
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In preparation for the forthcoming spec changes for #6977.
While at it, modernize existing File example that dates
back all the way to commit 18c5b488a3.
Change-Id: Id10e4df0513e3de15bd58867222923eefa9473ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/187978
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also, reorder packages so the list is in alphabetical order.
Fixes#32914.
Change-Id: Ifa504cb7e48df31ba6dc0e5756148430b59fa139
Reviewed-on: https://go-review.googlesource.com/c/go/+/187797
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Spotted while seeing CL 187818 in master.
Change-Id: Ic3f42558f6833fc35580b2b2a15f2c5aba5713c0
Reviewed-on: https://go-review.googlesource.com/c/go/+/187822
Reviewed-by: Ian Lance Taylor <iant@golang.org>
As noticed while mentoring at Gophercon, a common mistake for
beginners is that, after they install git-codereview, it's not
found by git because they haven't put GOPATH/bin in their
environment.
Change-Id: I885cee0f532a4069d1a17ea27365d54965ecca22
Reviewed-on: https://go-review.googlesource.com/c/go/+/187818
Reviewed-by: Katie Hockman <katie@golang.org>
While it's true that CL 168479 was also backported to 1.12, this is
irrelevant for the Go1.13 release notes.
Change-Id: I044be69f8f2bc005f58a0d63db05129add15f674
Reviewed-on: https://go-review.googlesource.com/c/go/+/186138
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Do not allow a pseudo-version derived from a canonical tag to refer to
the same revision as the tag itself. It's unnecessary (because
canonical tags already have a total ordering) and confusing (the
pseudo-version appears to come after the tag, but actually refers to
the exact same revision).
Updates #32879
Updates #27173
Change-Id: I02befedbe89c8819bdd93e470783ce63fc813193
Reviewed-on: https://go-review.googlesource.com/c/go/+/184720
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Go 1.14 will no longer run on Native Client (NaCl). Updating the 1.13
release notes to indicate this. See #30439.
Fixes#32948
Change-Id: Ia147bb053adc098bd696dbdb01553c23222f8134
Reviewed-on: https://go-review.googlesource.com/c/go/+/185537
Reviewed-by: Andrew Bonventre <andybons@golang.org>
- fix link for `Time.Format`
- fix closing tag for `go get`
- add links for `runtime.Caller`, `runtime.Callers`
- remove link for `TypedArrayOf` since it has been removed (CL 177537)
Change-Id: I1dc38226e6d91c68fbd2f02c1acfad5327f4ebe8
Reviewed-on: https://go-review.googlesource.com/c/go/+/185038
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
When reading tip.golang.org/doc/go1.13.html, the spec links in
the "Changes to the language" section should point to the updated
spec, not the old one.
Change-Id: I6b13ca0b4c722ed52b84a12a680bece876a4e478
Reviewed-on: https://go-review.googlesource.com/c/go/+/184118
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Looking at the live release notes on tip.golang.org, the Modules
section is much more verbose than the other sections.
To some extent that's to be expected, but too much detail in the
release notes might discourage folks from consulting the actual
documentation. Ensure that topics have clear links and omit
unnecessary details.
Change-Id: I1ccbc1697fccaf7ca7094c606bd11696c46d87f0
Reviewed-on: https://go-review.googlesource.com/c/go/+/183987
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As suggested by thepudds in CL 183630.
Also adjust the paragraph to harmonize the transitions between the
newly-adjacent paragraphs.
Change-Id: Ie85abea946db81804c1995d27be4951d5db6b812
Reviewed-on: https://go-review.googlesource.com/c/go/+/183918
Reviewed-by: Jay Conrod <jayconrod@google.com>
Fixup for two typos from CL 183630.
Change-Id: I7968a736680e8a6bbd1f4691d443b217702bc190
Reviewed-on: https://go-review.googlesource.com/c/go/+/183843
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Also fix up markup in the “Version validation” section to correct
indentation on Chrome.
Change-Id: Ib930d324567c086bbd0c67b105272bdfcca77b12
Reviewed-on: https://go-review.googlesource.com/c/go/+/183630
Reviewed-by: Jay Conrod <jayconrod@google.com>
Also alphabetize port listing.
Change-Id: I4cc552a74856c9955571d721deb6223438c7d856
Reviewed-on: https://go-review.googlesource.com/c/go/+/183637
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Previously, most operations involving pseudo-versions allowed any
arbitrary combination of version string and date, and would resolve to
the underlying revision (typically a Git commit hash) as long as that
revision existed.
There are a number of problems with that approach:
• The pseudo-version participates in minimal version selection. If its
version prefix is inaccurate, the pseudo-version may appear to have
higher precedence that the releases that follow it, effectively
“pinning” the module to that commit. For release tags, module
authors are the ones who make the decision about release tagging;
they should also have control over the pseudo-version precedence
within their module.
• The commit date within the pseudo-version provides a total order
among pseudo-versions. If it is not accurate, the pseudo-version
will sort into the wrong place relative to other commits with the
same version prefix.
To address those problems, this change restricts the pseudo-versions
that the 'go' command accepts, rendering some previously
accepted-but-not-canonical versions invalid. A pseudo-version is now
valid only if all of:
1. The tag from which the pseudo-version derives points to the named
revision or one of its ancestors as reported by the underlying VCS
tool, or the pseudo-version is not derived from any tag (that is,
has a "vX.0.0-" prefix before the date string and uses the lowest
major version appropriate to the module path).
2. The date string within the pseudo-version matches the UTC timestamp
of the revision as reported by the underlying VCS tool.
3. The short name of the revision within the pseudo-version (such as a
Git hash prefix) is the same as the short name reported by the
underlying cmd/go/internal/modfetch/codehost.Repo. Specifically, if
the short name is a SHA-1 prefix, it must use the same number of
hex digits (12) as codehost.ShortenSHA1.
4. The pseudo-version includes a '+incompatible' suffix only if it is
needed for the corresponding major version, and only if the
underlying module does not have a go.mod file.
We believe that all releases of the 'go' tool have generated
pseudo-versions that meet these constraints. However, a few
pseudo-versions edited by hand or generated by third-party tools do
not. If we discover invalid-but-benign pseudo-versions in widely-used
existing dependencies, we may choose to add a whitelist for those
specific path/version combinations.
―
To work around invalid dependencies in leaf modules, users may add a
'replace' directive from the invalid version to its valid equivalent.
Note that the go command's go.mod parser automatically resolves commit
hashes found in 'replace' directives to the appropriate
pseudo-versions, so in most cases one can write something like:
replace github.com/docker/docker v1.14.0-0.20190319215453-e7b5f7dbe98c => github.com/docker/docker e7b5f7dbe98c
and then run any 'go' command (such as 'go list' or 'go mod tidy') to
resolve it to an appropriate pseudo-version. Note that the invalid
version will still be used in minimal version selection, so this use
of 'replace' directives is an incomplete workaround.
―
One of the common use cases for higher-than-tagged pseudo-versions is
for projects that do parallel development on release branches. For
example, if a project cuts a 'v1.2' release branch at v1.2.0, they may
want future commits on the main branch to show up as pre-releases for
v1.3.0 rather than for v1.2.1 — especially if v1.2.1 is already tagged
on the release branch. (On the other hand, a backport of a patch to
the v1.2 branch should not show up as a pre-release for v1.3.0.)
To address this use-case, module authors can make use of our existing
support for pseudo-versions derived from pre-release tags: if the
author adds an explicit pre-release tag (such as 'v1.3.0-devel') to
the first commit after the branch, then the pseudo-versions for that
commit and its descendents will be derived from that tag and will sort
appropriately in version selection.
―
Updates #27171Fixes#29262Fixes#27173Fixes#32662Fixes#32695
Change-Id: I0d50a538b6fdb0d3080aca9c9c3df1040da1b329
Reviewed-on: https://go-review.googlesource.com/c/go/+/181881
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
There is a subtle distinction between a value
*being* the zero value vs being *equal to* the zero value.
This was discussed at length in #31450.
Using "a zero value" in the docs suggests that there may
be more than zero value. That is possible on the "equal to
zero value" reading, but not the "is zero" reading that we
selected for the semantics of IsZero.
This change attempts to prevent any confusion on this front by
switching to "the zero value" in the documentation.
And while we're here, eliminate a double-space.
(Darn macbook keyboards.)
Change-Id: Iaa02ba297438793f5a90be9919a4d53baef92f8e
Reviewed-on: https://go-review.googlesource.com/c/go/+/182617
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Write release notes for a few reflect, runtime, and syscall changes.
The init randomization has been reverted.
Change-Id: Idae481ca015e325eb7302abaa15b2792312f4c32
Reviewed-on: https://go-review.googlesource.com/c/go/+/181577
Reviewed-by: Austin Clements <austin@google.com>
* In doc/install-source.html, clarify the meaning of $GOBIN and
describe where executables from the Go distribution are
installed. Also describe $GOPATH, since it provides a default value
for $GOBIN and may conflict with $GOROOT.
* Add more detail to 'go help install' as well.
Fixes#31576
Change-Id: Ib8a8c21677c3aa0ebef97a3b587b6f8fe338b80e
Reviewed-on: https://go-review.googlesource.com/c/go/+/182341
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This change makes the release notes for Go 1.13 more complete
by mentioning a new function in the os package.
Change-Id: I0d637fd70ff6d14782bbfb7c13985a0f83b19d6d
Reviewed-on: https://go-review.googlesource.com/c/go/+/181945
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: Idb5bf2a61bff635e3ebd926bdeacf943578ac874
Reviewed-on: https://go-review.googlesource.com/c/go/+/181681
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The additions were generated using golang.org/x/build/cmd/relnote.
Change-Id: Ie7322f7d01a2dd4a7bca89b9ef9c1ce93bc2671a
Reviewed-on: https://go-review.googlesource.com/c/go/+/180778
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Some <h3>s were missing ids due to which the anchor links
weren't getting generated.
Fixes#32415
Change-Id: Ica21425c1a7c49735231c1de96b6c77dd594ce64
Reviewed-on: https://go-review.googlesource.com/c/go/+/180397
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The spec was not very precise as to what happens with respect to sharing
if a sliced operand is (a pointer to) an array. Added a small clarification
and a supporting example.
Fixes#31689.
Change-Id: Ic49351bec2033abd3f5428154ec3e9a7c2c9eaa5
Reviewed-on: https://go-review.googlesource.com/c/go/+/177139
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Add a small paragraph and example pointing out
the difference for the case where T is a slice
or map. This is a common error for Go novices.
Fixes#29425.
Change-Id: Icdb59f25361e9f6a09b190fbfcc9ae0c7d90077b
Reviewed-on: https://go-review.googlesource.com/c/go/+/176338
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The very first paragraph on "Package initialization" stated that
"variables are initialized in declaration order, but after any
variables they might depend on". This phrasing was easily
misread as "declaration order is the first sorting criteria"
and then contradicted what the subsequent paragraphs spelled
out in precise detail.
Instead, variable initialization proceeds by repeatedly determining
a set of ready to initialize variables, and then selecting from that
set the variable declared earliest. That is, declaration order is the
second sorting criteria.
Also, for the purpose of variable initialization, declarations
introducing blank (_) variables are considered like any other
variables (their initialization expressions may have side-effects
and affect initialization order), even though blank identifiers
are not "declared".
This CL adds clarifying language regarding these two issues
and the supporting example.
Both gccgo and go/types implement this behavior. cmd/compile
has a long-standing issue (#22326).
The spec also did not state in which order multiple variables
initialized by a single (multi-value) initialization expression are
handled. This CL adds a clarifying paragraph: If any such variable
is initialized, all that declaration's variables are initialized at
the same time.
This behavior matches user expectation: We are not expecting to
observe partially initialized sets of variables in declarations
such as "var a, b, c = f()".
It also matches existing cmd/compile and go/types (but not gccgo)
behavior.
Finally, cmd/compile, gccgo, and go/types produce different
initialization orders in (esoteric) cases where hidden (not
detected with existing rules) dependencies exist. Added a
sentence and example clarifying how much leeway compilers have
in those situations. The goal is to preserve the ability to
use static initialization while at the same time maintain
the relative initialization order of variables with detected
dependencies.
Fixes #31292.
Updates #22326.
Change-Id: I0a369abff8cfce27afc975998db875f5c580caa2
Reviewed-on: https://go-review.googlesource.com/c/go/+/175980
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Previous section of documentation said that if GOPATH is not set then
it will be default to "$HOME/go", not "$HOME/work".
This change fix the path in example code to "$HOME/go", and while at it
fix the output of git command after commit.
Change-Id: Ifedca6c3997efd07e865c27b7321d755acad0254
Reviewed-on: https://go-review.googlesource.com/c/go/+/175258
Reviewed-by: Andrew Bonventre <andybons@golang.org>
The compiler output shown in the doc is now quite old
(most of the changes happened in Go 1.5).
Update it to be more like what users will actually see.
Also explain how to get literal machine code again.
Prompted by #30968.
Change-Id: I0ce139c3fe299ccc43e85b6aca81c6e0aac1a2df
Reviewed-on: https://go-review.googlesource.com/c/go/+/175757
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
For example, can use `goroutine all bt` to dump all goroutines'
information.
Change-Id: I51b547c2b837913e4bdabf0f45b28f09250a3e34
GitHub-Last-Rev: d04dcd4f58
GitHub-Pull-Request: golang/go#26283
Reviewed-on: https://go-review.googlesource.com/c/go/+/122589
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
The top right menu in Gerrit is now a gear icon, and the link
has a slightly different title.
Change-Id: I3f5d194f31ad09a99416a45db392aa4b5c7d98ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/173400
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change adds the environment variable GOWASM, which is a comma
separated list of experimental WebAssembly features that the compiled
WebAssembly binary is allowed to use. The default is to use no
experimental features. Initially there are no features avaiable.
More information about feature proposals can be found at
https://github.com/WebAssembly/proposals
Change-Id: I4c8dc534c99ecff8bb075dded0186ca8f8decaef
Reviewed-on: https://go-review.googlesource.com/c/go/+/168881
Run-TryBot: Richard Musiol <neelance@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
ppc64{,le} processor level selection allows the compiler to generate instructions
targeting newer processors and processor-specific optimizations without breaking
compatibility with our current baseline. This feature introduces a new environment
variable, GOPPC64.
GOPPC64 is a GOARCH=ppc64{,le} specific option, for a choice between different
processor levels (i.e. Instruction Set Architecture versions) for which the
compiler will target. The default is 'power8'.
Change-Id: Ic152e283ae1c47084ece4346fa002a3eabb3bb9e
Reviewed-on: https://go-review.googlesource.com/c/go/+/163758
Run-TryBot: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This CL documents the new binary and octal integer literals,
hexadecimal floats, generalized imaginary literals and digit
separators for all number literals in the spec.
Added empty lines between abutting paragraphs in some places
(a more thorough cleanup can be done in a separate CL).
A minor detail: A single 0 was considered an octal zero per the
syntax (decimal integer literals always started with a non-zero
digit). The new octal literal syntax allows 0o and 0O prefixes
and when keeping the respective octal_lit syntax symmetric with
all the others (binary_lit, hex_lit), a single 0 is not automatically
part of it anymore. Rather than complicating the new octal_lit syntax
to include 0 as before, it is simpler (and more natural) to accept
a single 0 as part of a decimal_lit. This is purely a notational
change.
R=Go1.13
Updates #12711.
Updates #19308.
Updates #28493.
Updates #29008.
Change-Id: Ib9fdc6e781f6031cceeed37aaed9d05c7141adec
Reviewed-on: https://go-review.googlesource.com/c/go/+/161098
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
A recent edit broke the flow; add a paragraph break when the subject
switches from maps to structs.
No changes in wording.
Change-Id: I5df88ec36b9d81931cfdbc684424440d01ac06d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/165917
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
And explain that it does this. A minor change probably worth mentioning,
although (#28782) I'd still like to freeze this document against any substantial
changes.
Fix#30568.
Change-Id: I74c56744871cfaf00dc52a9b480ca61d3ed19a6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/165597
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Path should now appear with the correct slash, depending on which
platform install document is being viewed - keeping in line with the
rest of the document.
Fixes#30160
Change-Id: Ib10e5a4adf366c700bff6f8d246bd5e3111ed61c
Reviewed-on: https://go-review.googlesource.com/c/go/+/162918
Reviewed-by: Andrew Bonventre <andybons@golang.org>
There's a "lib/time" sub-section in the Go 1.12 relase notes that
points to a non-existent golang.org/pkg/lib/time page.
The note is about a change in the tz database in the src/lib/time
directory, but the section's title (and the link) should probably just
refer to the time package.
Change-Id: Ibf9dacd710e72886f14ad0b7415fea1e8d25b83a
Reviewed-on: https://go-review.googlesource.com/c/164977
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Using go get prevents the failure case of when the
user doesn't have the repo on their machine.
Change-Id: I9c1174087728b5b06b578b0d52df6eeb7e8c7a3c
Reviewed-on: https://go-review.googlesource.com/c/163718
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Change-Id: I46fa43f6c5ac49386f4622e1363d8976f49c0894
Reviewed-on: https://go-review.googlesource.com/c/162019
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
install.html still insisted that GOROOT must be set if a binary install
of Go is set up in a custom directory. However, since 1.10, this has
been unnecessary as the GOROOT will be found based on the location of
the 'go' binary being run.
Likewise, install-source.html includes an 'export GOROOT' line in a
section that only talks about explicitly setting GOARCH and GOOS, which
is optional. We don't want to have users think it is recommended to set
GOROOT here either, so remove the unnecessary line.
Change-Id: I7dfef09f9a1d003e0253b793d63ea40d5cf1837f
Reviewed-on: https://go-review.googlesource.com/c/161758
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Most of the issues that led to the decision on #30055 were related to
incompatibility with or faulty support for RSA-PSS (#29831, #29779,
v1.5 signatures). RSA-PSS is required by TLS 1.3, but is also available
to be negotiated in TLS 1.2.
Altering TLS 1.2 behavior based on GODEBUG=tls13=1 feels surprising, so
just disable RSA-PSS entirely in TLS 1.2 until TLS 1.3 is on by default,
so breakage happens all at once.
Updates #30055
Change-Id: Iee90454a20ded8895e5302e8bcbcd32e4e3031c2
Reviewed-on: https://go-review.googlesource.com/c/160998
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Note the removal of the go tool tour command in the Go 1.12 release
notes.
Updates #24819
Change-Id: I258ab9401ea2cc06a83328c67299376fcf23c980
Reviewed-on: https://go-review.googlesource.com/c/158618
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
I needed Go 1.10 to debug and fix a test failure on that Go version in
x/tools, but I forgot what the magic 'go get' command for this was.
Googling "download specific golang version" and similar keywords showed
no results, presumably because the golang.org/dl subrepo isn't
prominently recommended nor documented anywhere.
The most appropriate documentation page to add this to is doc/install,
since it goes into some detail and is well indexed. We only need a short
section to introduce the trick.
The example does mention a specific version, Go 1.10.7, but I couldn't
imagine a way to make it version-agnostic while still being clear on
what the commands effectively do.
Change-Id: I13158564d76d95caec412cdb35a50a4356df5863
Reviewed-on: https://go-review.googlesource.com/c/157457
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This is about a minor change but worthy of note because this
may affect the profile results users will see.
Change-Id: Ie2c4358b248f868662dbc71db587576481aa7238
Reviewed-on: https://go-review.googlesource.com/c/158577
Reviewed-by: Raul Silvera <rauls5382@gmail.com>
Reviewed-by: Austin Clements <austin@google.com>
The ABI changes should be completely transparent to Go code, but could
cause linking issues in certain situations involving assembly code
reaching across package boundaries. If users encounter linking
problems, point them to the "Compatibility" section of the ABI design
document, which gives some guidance.
Change-Id: I4156d164562e2ec0de7ae8f9a3631a32ec45b317
Reviewed-on: https://go-review.googlesource.com/c/158237
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Worth mentioning because the results are not bit-for-bit identical.
This causes a test failure in github.com/fogleman/gg.
Updates #6794
Change-Id: I701f34927731fb5c658a1be271c04388e5e7e3f7
Reviewed-on: https://go-review.googlesource.com/c/157417
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It was recently updated (again) to version 2018i. Since we're here,
wrap the paragraph at ~70 columns, like all the others.
Change-Id: I0a380385f34f1df1258a9f2af447234967422f37
Reviewed-on: https://go-review.googlesource.com/c/156857
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Change a link in the cgo section of the 1.12 release notes from
https://golang.org/cmd/cgo ...
to
/cmd/cgo/ ...
to uniform it with other links on the page, and to ensure correct
target when the page is displayed on tip.golang.org.
Change-Id: I7653a6ea15ce111a60929c7ae7e9fb0dc9515502
Reviewed-on: https://go-review.googlesource.com/c/156858
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
