In b we only need the division by 0 check.
func b(i uint, v []byte) byte {
return v[i%uint(len(v))]
}
Updates #15079.
Change-Id: Ic7491e677dd57cd6ba577efbce576dbb6e023cbd
Reviewed-on: https://go-review.googlesource.com/21502
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Ahmed Waheed <oneofone@gmail.com>
When we grow the heap, we create a temporary "in use" span for the
memory acquired from the OS and then free that span to link it into
the heap. Hence, we (1) increase pagesInUse when we make the temporary
span so that (2) freeing the span will correctly decrease it.
However, currently step (1) increases pagesInUse by the number of
pages requested from the heap, while step (2) decreases it by the
number of pages requested from the OS (the size of the temporary
span). These aren't necessarily the same, since we round up the number
of pages we request from the OS, so steps 1 and 2 don't necessarily
cancel out like they're supposed to. Over time, this can add up and
cause pagesInUse to underflow and wrap around to 2^64. The garbage
collector computes the sweep ratio from this, so if this happens, the
sweep ratio becomes effectively infinite, causing the first allocation
on each P in a sweep cycle to sweep the entire heap. This makes
sweeping effectively STW.
Fix this by increasing pagesInUse in step 1 by the number of pages
requested from the OS, so that the two steps correctly cancel out. We
add a test that checks that the running total matches the actual state
of the heap.
Fixes#15022. For 1.6.x.
Change-Id: Iefd9d6abe37d0d447cbdbdf9941662e4f18eeffc
Reviewed-on: https://go-review.googlesource.com/21280
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
To refer to types and names by offsets, we want to keep the symbols in
the same sections. Do this by making all types .relro for now.
Once name offsets are further along, name data can move out of relro.
Change-Id: I1cbd2e914bd180cdf25c4aeb13d9c1c734febe69
Reviewed-on: https://go-review.googlesource.com/21394
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Identify this assignment case and instead of the more general error
prog.go:6: cannot assign to students["sally"].age (value of type int)
produce
prog.go:6: cannot directly assign to struct field students["sally"].age in map
that explains why the assignment is not possible. Used ExprString
instead of String of operand since the type of the field is not relevant
to the error.
Updates #13779.
Change-Id: I581251145ae6336ddd181b9ddd77f657c51b5aff
Reviewed-on: https://go-review.googlesource.com/21463
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Identify this assignment case and instead of the more general error
prog.go:6: cannot assign to students["sally"].age
produce
prog.go:6: cannot directly assign to struct field students["sally"].age in map
that explains why the assignment is not possible.
Fixes#13779.
Change-Id: I90c10b445f907834fc1735aa66e44a0f447aa74f
Reviewed-on: https://go-review.googlesource.com/21462
Reviewed-by: David Chase <drchase@google.com>
It appears that windows osyield is just 15ms sleep on my computer
(see benchmarks below). Replace NtWaitForSingleObject in osyield
with SwitchToThread (as suggested by Dmitry).
Also add issue #14790 related benchmarks, so we can track perfomance
changes in CL 20834 and CL 20835 and beyond.
Update #14790
benchmark old ns/op new ns/op delta
BenchmarkChanToSyscallPing1ms 1953200 1953000 -0.01%
BenchmarkChanToSyscallPing15ms 31562904 31248400 -1.00%
BenchmarkSyscallToSyscallPing1ms 5247 4202 -19.92%
BenchmarkSyscallToSyscallPing15ms 5260 4374 -16.84%
BenchmarkChanToChanPing1ms 474 494 +4.22%
BenchmarkChanToChanPing15ms 468 489 +4.49%
BenchmarkOsYield1ms 980018 75.5 -99.99%
BenchmarkOsYield15ms 15625200 75.8 -100.00%
Change-Id: I1b4cc7caca784e2548ee3c846ca07ef152ebedce
Reviewed-on: https://go-review.googlesource.com/21294
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This makes these names even less likely to collide with a real user-defined function.
Fixes#13852.
Change-Id: If5a8562c6797ced19c355c7ab2c86fc4401a8674
Reviewed-on: https://go-review.googlesource.com/21490
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Add supporting code for runtime initialization, including both
32- and 64-bit x86 architectures.
Add .ctors section on Windows to PE .o files, and INITENTRY to .ctors
section to plug in to the GCC C/C++ startup initialization mechanism.
This allows the Go runtime to initialize itself. Add .text section
symbol for .ctor relocations. Note: This is unlikely to be useful for
MSVC-based toolchains.
Fixes#13494
Change-Id: I4286a96f70e5f5228acae88eef46e2bed95813f3
Reviewed-on: https://go-review.googlesource.com/18057
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Rather than having half a dozen switch statements. Also remove some c2go dregs.
Change-Id: I19af5b64f73369126020e15421c34cad5bbcfbf8
Reviewed-on: https://go-review.googlesource.com/21442
Reviewed-by: Ian Lance Taylor <iant@golang.org>
On s390x char is unsigned. We cannot force it to be signed using
-fsigned-char (see arm64) because the s390x gccgo API is already
public and we need to stick as closely as possible to it to avoid
breaking existing projects. In order to match the gccgo API we
also force the RawSockaddr.Data and RawSockaddrUnix.Path fields
to be signed.
This CL adds a post-processing pass (mkpost.go) to mkall.sh in
order to export the types of fields in PtraceRegs on s390x
without affecting the API on other platforms. The types of these
fields match their counterparts in gccgo. mkpost.go also cleans
up the Pad_cgo* fields and X_* fields (these fields are not
exported by gccgo currently). It could be extended to add build
tags on platforms that need them.
Change-Id: I66bdf5b86ec98af70baf666989027bb354df9e3e
Reviewed-on: https://go-review.googlesource.com/20961
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Change-Id: I91873aaebf79bdf1c00d38aacc1a1fb8d79656a7
Reviewed-on: https://go-review.googlesource.com/21433
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This makes clear that Go's path.Join and filepath.Join are different
from the Python os.path.join (and perhaps others).
Requested in private mail.
Change-Id: Ie5dfad8a57f9baa5cca31246af1fd4dd5b1a64ee
Reviewed-on: https://go-review.googlesource.com/20711
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This code made sense before fmt switched to using sync.Pool, but a
sync.Pool clears all items on GC, so not reusing something based on
size is just a waste of memory.
Change-Id: I201312b0ee6c572ff3c0ffaf71e42623a160d23f
Reviewed-on: https://go-review.googlesource.com/21480
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Introduces the new relocation variant RV_390_DBL which indicates
that the relocation value should be shifted right by 1 (to make
it 2-byte aligned).
Change-Id: I03fa96b4759ee19330c5298c3720746622fb1a03
Reviewed-on: https://go-review.googlesource.com/20878
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Rather than specifying every field that should be cleared in Reset,
it is better to just zero the entire struct and only preserve or set the
fields that we actually care about. This ensures that the Header field
is reset for the next use.
Fixes#15077
Change-Id: I41832e506d2d64c62b700aa1986e7de24a577511
Reviewed-on: https://go-review.googlesource.com/21465
Run-TryBot: Joe Tsai <joetsai@digital-static.net>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Handle this case:
if 0 <= i && i < len(a) {
use a[i]
}
Shaves about 5k from pkg/tools/linux_amd64/*.
Change-Id: I6675ff49aa306b0d241b074c5738e448204cd981
Reviewed-on: https://go-review.googlesource.com/21431
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Changes made:
* Reader.flg is not used anywhere else other than readHeader and
does not need to be stored.
* Store Reader.digest and Writer.digest as uint32s rather than as
a hash.Hash32 and use the crc32.Update function instead. This simplifies
initialization logic since the zero value of uint32 is the initial
CRC-32 value. There are no performance detriments to doing this since
the hash.Hash32 returned by crc32 simply calls crc32.Update as well.
* s/[0:/[:/ Consistently use shorter notation for slicing.
* s/RFC1952/RFC 1952/ Consistently use RFC notation.
Change-Id: I55416a19f4836cbed943adaa3f672538ea5d166d
Reviewed-on: https://go-review.googlesource.com/21429
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Joe Tsai <joetsai@digital-static.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The issue was seen when inlining an exported function that contained
a fallthrough statement.
Fixes#15071
Change-Id: I1e8215ad49d57673dba7e8f8bd2ed8ad290dc452
Reviewed-on: https://go-review.googlesource.com/21452
Reviewed-by: Dave Cheney <dave@cheney.net>
The IsStruct case is meant to handle cases like append(f()) where f's
result parameters are something like ([]int, int, int). However, at
this point in the compiler we've already rewritten append(f()) into
"tmp1, tmp2, tmp3 := f(); append(tmp1, tmp2, tmp3)".
As further evidence, the t.Elem() is not a valid method call for a
struct type anyway, which would trigger the Fatalf call in Type.Elem
if this code was ever hit.
Change-Id: Ia066f93df66ee3fadc9a9a0f687be7b5263af163
Reviewed-on: https://go-review.googlesource.com/21427
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Make sure that for any DLL that Go uses itself, we only look for the
DLL in the Windows System32 directory, guarding against DLL preloading
attacks.
(Unless the Windows version is ancient and LoadLibraryEx is
unavailable, in which case the user probably has bigger security
problems anyway.)
This does not change the behavior of syscall.LoadLibrary or NewLazyDLL
if the DLL name is something unused by Go itself.
This change also intentionally does not add any new API surface. Instead,
x/sys is updated with a LoadLibraryEx function and LazyDLL.Flags in:
https://golang.org/cl/21388
Updates #14959
Change-Id: I8d29200559cc19edf8dcf41dbdd39a389cd6aeb9
Reviewed-on: https://go-review.googlesource.com/21140
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Replace isideal(t) with t.IsUntyped().
Replace Istype(t, k) with t.IsKind(k).
Replace isnilinter(t) with t.IsEmptyInterface().
Also replace a lot of t.IsKind(TFOO) with t.IsFoo().
Replacements prepared mechanically with gofmt -w -r.
Passes toolstash -cmp.
Change-Id: Iba48058f3cc863e15af14277b5ff5e729e67e043
Reviewed-on: https://go-review.googlesource.com/21424
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
This removes all access to Type.Bound
from outside type.go.
Update sinit to make a new type rather than
copy and mutate.
Update bimport to create a new slice type
instead of mutating TDDDFIELD.
These are rare, so the extra allocs are nominal.
I’m not happy about having a setter,
but it appears the most practical route
forward at the moment, and it only has a few uses.
Passes toolstash -cmp.
Change-Id: I174f07c8f336afc656904bde4bdbde4f3ef0db96
Reviewed-on: https://go-review.googlesource.com/21423
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes a problem when using the external linker on Solaris. The Solaris
external linker still doesn't work due to issue #14957.
The problem is, for example, with `go test cmd/objdump`:
objdump_test.go:71: go build fmthello.go: exit status 2
# command-line-arguments
/var/gcc/iant/go/pkg/tool/solaris_amd64/link: running gcc failed: exit status 1
Undefined first referenced
symbol in file
x_cgo_callers /tmp/go-link-355600608/go.o
ld: fatal: symbol referencing errors
collect2: error: ld returned 1 exit status
Change-Id: I54917cfd5c288ee77ea25c439489bd2c9124fe73
Reviewed-on: https://go-review.googlesource.com/21392
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This change exposes a facility to create new struct types from a slice of
reflect.StructFields.
- reflect: first stab at implementing StructOf
- reflect: tests for StructOf
StructOf creates new struct types in the form of structTypeWithMethods
to accomodate the GC (especially the uncommonType.methods slice field.)
Creating struct types with embedded interfaces with unexported methods
is not supported yet and will panic.
Creating struct types with non-ASCII field names or types is not yet
supported (see #15064.)
Binaries' sizes for linux_amd64:
old=tip (0104a31)
old bytes new bytes delta
bin/go 9911336 9915456 +0.04%
reflect 781704 830048 +6.18%
Updates #5748.
Updates #15064.
Change-Id: I3b8fd4fadd6ce3b1b922e284f0ae72a3a8e3ce44
Reviewed-on: https://go-review.googlesource.com/9251
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
There are 5293 loop in the main go repository.
A survey of the top most common for loops:
18 for __k__ := 0; i < len(sa.Addr); i++ {
19 for __k__ := 0; ; i++ {
19 for __k__ := 0; i < 16; i++ {
25 for __k__ := 0; i < length; i++ {
30 for __k__ := 0; i < 8; i++ {
49 for __k__ := 0; i < len(s); i++ {
67 for __k__ := 0; i < n; i++ {
376 for __k__ := range __slice__ {
685 for __k__, __v__ := range __slice__ {
2074 for __, __v__ := range __slice__ {
The algorithm to find induction variables handles all cases
with an upper limit. It currently doesn't find related induction
variables such as c * ind or c + ind.
842 out of 22954 bound checks are removed for src/make.bash.
1957 out of 42952 bounds checks are removed for src/all.bash.
Things to do in follow-up CLs:
* Find the associated pointer for `for _, v := range a {}`
* Drop the NilChecks on the pointer.
* Replace the implicit induction variable by a loop over the pointer
Generated garbage can be reduced if we share the sdom between passes.
% benchstat old.txt new.txt
name old time/op new time/op delta
Template 337ms ± 3% 333ms ± 3% ~ (p=0.258 n=9+9)
GoTypes 1.11s ± 2% 1.10s ± 2% ~ (p=0.912 n=10+10)
Compiler 5.25s ± 1% 5.29s ± 2% ~ (p=0.077 n=9+9)
MakeBash 33.5s ± 1% 34.1s ± 2% +1.85% (p=0.011 n=9+9)
name old alloc/op new alloc/op delta
Template 63.6MB ± 0% 63.9MB ± 0% +0.52% (p=0.000 n=10+9)
GoTypes 218MB ± 0% 219MB ± 0% +0.59% (p=0.000 n=10+9)
Compiler 978MB ± 0% 985MB ± 0% +0.69% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
Template 582k ± 0% 583k ± 0% +0.10% (p=0.000 n=10+10)
GoTypes 1.78M ± 0% 1.78M ± 0% +0.12% (p=0.000 n=10+10)
Compiler 7.68M ± 0% 7.69M ± 0% +0.05% (p=0.000 n=10+10)
name old text-bytes new text-bytes delta
HelloSize 581k ± 0% 581k ± 0% -0.08% (p=0.000 n=10+10)
CmdGoSize 6.40M ± 0% 6.39M ± 0% -0.08% (p=0.000 n=10+10)
name old data-bytes new data-bytes delta
HelloSize 3.66k ± 0% 3.66k ± 0% ~ (all samples are equal)
CmdGoSize 134k ± 0% 134k ± 0% ~ (all samples are equal)
name old bss-bytes new bss-bytes delta
HelloSize 126k ± 0% 126k ± 0% ~ (all samples are equal)
CmdGoSize 149k ± 0% 149k ± 0% ~ (all samples are equal)
name old exe-bytes new exe-bytes delta
HelloSize 947k ± 0% 946k ± 0% -0.01% (p=0.000 n=10+10)
CmdGoSize 9.92M ± 0% 9.91M ± 0% -0.06% (p=0.000 n=10+10)
Change-Id: Ie74bdff46fd602db41bb457333d3a762a0c3dc4d
Reviewed-on: https://go-review.googlesource.com/20517
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
The new function runtime.SetCgoTraceback may be used to register stack
traceback and symbolizer functions, written in C, to do a stack
traceback from cgo code.
There is a sample implementation of runtime.SetCgoSymbolizer at
github.com/ianlancetaylor/cgosymbolizer. Just importing that package is
sufficient to get symbolic C backtraces.
Currently only supported on linux/amd64.
Change-Id: If96ee2eb41c6c7379d407b9561b87557bfe47341
Reviewed-on: https://go-review.googlesource.com/17761
Reviewed-by: Austin Clements <austin@google.com>
Added a debug flag "-d closure" to explain compilation of
closures (should this be done some other way? Should we
rewrite the "-m" flag to "-d escapes"?) Used this to
discover that cause was an OXXX node in the captured vars
list, and in turn noticed that OXXX nodes are explicitly
ignored in all other processing of captured variables.
Couldn't figure out a reproducer, did verify that this OXXX
was not caused by an unnamed return value (which is one use
of these). Verified lack of heap allocation by examining -S
output.
Assembly:
(runtime/mgc.go:1371) PCDATA $0, $2
(runtime/mgc.go:1371) CALL "".notewakeup(SB)
(runtime/mgc.go:1377) LEAQ "".gcBgMarkWorker.func1·f(SB), AX
(runtime/mgc.go:1404) MOVQ AX, (SP)
(runtime/mgc.go:1404) MOVQ "".autotmp_2242+88(SP), CX
(runtime/mgc.go:1404) MOVQ CX, 8(SP)
(runtime/mgc.go:1404) LEAQ go.string."GC worker (idle)"(SB), AX
(runtime/mgc.go:1404) MOVQ AX, 16(SP)
(runtime/mgc.go:1404) MOVQ $16, 24(SP)
(runtime/mgc.go:1404) MOVB $20, 32(SP)
(runtime/mgc.go:1404) MOVQ $0, 40(SP)
(runtime/mgc.go:1404) PCDATA $0, $2
(runtime/mgc.go:1404) CALL "".gopark(SB)
Added a check for compiling_runtime to ensure that this is
caught in the future. Added a test to test the check.
Verified that 1.5.3 did NOT reject the test case when
compiled with -+ flag, so this is not a recently added bug.
Cause of bug is two-part -- there was no leaking closure
detection ever, and instead it relied on capture-of-variables
to trigger compiling_runtime test, but closures improved in
1.5.3 so that mere capture of a value did not also capture
the variable, which thus allowed closures to escape, as well
as this case where the escape was spurious. In
fixedbugs/issue14999.go, compare messages for f and g;
1.5.3 would reject g, but not f. 1.4 rejects both because
1.4 heap-allocates parameter x for both.
Fixes#14999.
Change-Id: I40bcdd27056810628e96763a44f2acddd503aee1
Reviewed-on: https://go-review.googlesource.com/21322
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Also cleans up return parameter stutter and missing periods.
Change-Id: I47f5c230227ddfd1b105d5e06842f89ffea50760
Reviewed-on: https://go-review.googlesource.com/21362
Reviewed-by: Andrew Gerrand <adg@golang.org>
Issue #8633 (and #9134) noted that we didn't document the rules about
closing the Response.Body when Client.Do returned both a non-nil
*Response and a non-nil error (which can only happen when the user's
CheckRedirect returns an error).
In the process of investigating, I cleaned this code up a bunch, but
no user-visible behavior should have changed, except perhaps some
better error messages in some cases.
It turns out it's always been the case that when a CheckRedirect error
occurs, the Response.Body is already closed. Document that.
And the new code makes that more obvious too.
Fixes#8633
Change-Id: Ibc40cc786ad7fc4e0cf470d66bb559c3b931684d
Reviewed-on: https://go-review.googlesource.com/21364
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
The change in 20907 fixed varexpr but broke aliased. After that change,
a reference to a field in a struct would not be seen as aliasing itself.
Before that change, it would, but only because all fields in a struct
aliased everything.
This CL changes the compiler to consider all references to a field as
aliasing all other fields in that struct. This is imperfect--a
reference to one field does not alias another field--but is a simple fix
for the immediate problem. A better fix would require tracking the
specific fields as well.
Fixes#15042.
Change-Id: I5c95c0dd7b0699e53022fce9bae2e8f50d6d1d04
Reviewed-on: https://go-review.googlesource.com/21390
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Updates x/net/http2 to git rev 31df19d6 for changes since Go 1.6.
The main change was https://go-review.googlesource.com/19726 (move
merging of HEADERS and CONTINUATION into Framer), but there were a few
garbage reduction changes too.
Change-Id: I882443d20749f8638f637a2835efe92538c95d31
Reviewed-on: https://go-review.googlesource.com/21365
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
The default is 10MB, like http2, but can be configured with a new
field http.Transport.MaxResponseHeaderBytes.
Fixes#9115
Change-Id: I01808ac631ce4794ef2b0dfc391ed51cf951ceb1
Reviewed-on: https://go-review.googlesource.com/21329
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
