Now that packet/ is checked in, we can add its Makefile. Also, a couple
of updates to error/ and s2k/ for bugfixes and to use the new crypto
package.
R=bradfitzgo
CC=golang-dev
https://golang.org/cl/4179043
(The unittest for Signature may seem a little small, but it's tested by
the higher level code.)
R=bradfitzgo
CC=golang-dev
https://golang.org/cl/4173043
In line with other functions such as Fprintf, put the
thing to be written first.
Apologies for the breakages this is sure to cause.
R=rsc, gri, adg, eds, r2, aam
CC=golang-dev
https://golang.org/cl/4169042
BSD and Darwin require an extra page between
end and the first mapping, and Windows has various
memory in the way too.
Fixes#1464.
R=r, r2
CC=golang-dev
https://golang.org/cl/4167041
Add Error type to enable clients to distinguish
between local and remote errors.
Also return "connection shut down error" after
the first error return rather than returning the
same error each time.
R=r
CC=golang-dev
https://golang.org/cl/4080058
Neither gofmt nor godoc are making use of a Styler (for
token-specific formatting) anymore. Stylers interacted in complicated
ways with HTML-escaping which was why the printer needed an HTML mode
in the first place.
godoc now uses a more powerful and general text formatting
function that does HTML escaping, text selection, and can
handle token-specific formatting if so desired (currently
used only for comments).
As a consequence, cleaned up uses of go/printer in godoc;
simplified the various write utility functions, and also
removed the need for the "html" template format (in favor of
html-esc which now does the same and is used more pervasively).
Applied gofmt -w src misc to verify no changes occured,
and tested godoc manually.
There should be no visible changes except that (type) code
snippets presented for godoc package documentation now
uses the same formatting as for general source code and
thus comments get the comment-specific color here as well
(not the case at the moment).
(TODO: godoc needs a good automatic test suite).
R=rsc
CC=golang-dev
https://golang.org/cl/4152042
Even if local, it requires communication with a daemon
which may not be available. This is creating problems
for getting an Ubuntu package going in Launchpad's PPA.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/3989062
Faster in most cases, and not prone to memory leaks. Named "Do" to match with similarly named method on Vector.
R=gri
CC=golang-dev
https://golang.org/cl/4134046
Currently, when an importer closes the connection, the exporter gives an
error message 'netchan export: error decoding client header:EOF'. This
change causes the exporter to look for an EOF during the parse of the
header, and silences the log message in that case.
R=r
CC=golang-dev, rog
https://golang.org/cl/4132044
Previously, the outer loop would continue until we selected the
client's least preferable ciphersuite.
R=golang-dev, r2
CC=golang-dev
https://golang.org/cl/4029056
OS X, at least, appears to test |byte == 255|, not |byte != 0| to
establish if a bool is true or false.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/4128064
Many recently issued certificates are chained: there's one or more
intermediate certificates between the host certificate and the root CA
certificate. This change causes the code to load any number of
certificates from the certificate file. This matches the behaviour of
common webservers, and the output of OpenSSL's command line tools.
R=golang-dev, r2
CC=golang-dev
https://golang.org/cl/4119057
If a multi-line raw string is the first token on a line, it
should not be indented because the following lines (belonging
to the raw string) are not indented either.
Adjusted src of ebnf/ebnf_test.go manually as it now is formatted
as expected.
gofmt -w src misc
Fixes#1072.
R=r
CC=golang-dev
https://golang.org/cl/4119056
signed or unsigned integers using %v or the formatless scanner.
That is, Sscan("0x11", &i) or Sscanf("0x11", "%v", &i) will now
set i to 17. If a format other than %v is presented, the behavior
is as before.
Fixes#1469.
R=rsc
CC=golang-dev
https://golang.org/cl/4131042
Must be invoked as ./clean.bash --gomake make
(or --gomake gmake, depending on the name of
GNU make).
R=niemeyer
CC=golang-dev
https://golang.org/cl/4023065
Note that DSA public key support is nascent and the verification
functions clearly don't support it yet. I'm intending to get RSA keys
working first.
R=bradfitzgo
CC=golang-dev
https://golang.org/cl/3973054
ReadRune. (If you have a Reader but not a RuneReader, use bufio.)
The matching code is a few percent slower but significantly cleaner.
R=rsc
CC=golang-dev
https://golang.org/cl/4125046
As discussed in the mailing list, this adds a simple barrier
implementation to the sync package which enables one or more
goroutines to wait for a counter to go down to zero.
R=rsc, rog, r
CC=golang-dev
https://golang.org/cl/3770045
notes:
* due to Issue 1466 the Msghdr struct for
src/pkg/syscall/ztypes_darwin_386.go
src/pkg/syscall/ztypes_darwin_amd64.go
had to be edited after the godefs generation.
* ztypes_*.go files for linux, freebsd and darwin
have been prepared on the correct host OS and ARCH.
While the total increase is a dozen lines per file
the diff is larger due to a change to godefs,
http://code.google.com/p/go/source/detail?r=c79e30afe9c8
while has altered the names of Pad members which
causes gofmt to realign the affected structs
R=rsc, mikioh
CC=golang-dev
https://golang.org/cl/4119053
Since nobody suggested major changes to the higher level API, I'm
splitting up the lower level code for review. This is the first of the
changes for the packet reading/writing code.
It deliberately doesn't include a Makefile because the package is
incomplete.
R=bradfitzgo
CC=golang-dev
https://golang.org/cl/4080051
* Don't require lines to be full.
* Don't forget to flush the line buffer.
* Update the test so that it doesn't happen to include only full lines
in order to test the above.
* Always write the line after the header as GNUPG expects it.
R=bradfitzgo
CC=golang-dev
https://golang.org/cl/4124043
OpenPGP changed its OCFB mode for more modern packets (for example, the
MDC symmetrically encrypted packet). This change adds a bool to
determine which mode is used.
R=bradfitzgo, r, rsc
CC=golang-dev
https://golang.org/cl/4126041
GC is still single-threaded.
Multiple threads will happen in another CL.
Garbage collection pauses are typically
about half as long as they were before this CL.
R=brainman, iant, r
CC=golang-dev
https://golang.org/cl/3975046
so that spawned processes avoid inheriting pipes.
Implement CloseOnExec.
Make file and pipe handles inheritable.
R=rsc, brainman, vincent.vanackere
CC=golang-dev
https://golang.org/cl/4126047
Follow morestack, so that crashes during a stack split
give complete traces. Also mark stack segment boundaries
as an aid to debugging.
Correct various line number bugs with yet another attempt
at interpreting the pc/ln table. This one has a chance at
being correct, because I based it on reading src/cmd/ld/lib.c
instead of on reading the documentation.
Fixes#1138.
Fixes#1430.
Fixes#1461.
throw: runtime: split stack overflow
runtime.throw+0x3e /home/rsc/g/go2/src/pkg/runtime/runtime.c:78
runtime.throw(0x81880af, 0xf75c8b18)
runtime.newstack+0xad /home/rsc/g/go2/src/pkg/runtime/proc.c:728
runtime.newstack()
runtime.morestack+0x4f /home/rsc/g/go2/src/pkg/runtime/386/asm.s:184
runtime.morestack()
----- morestack called from stack: -----
runtime.new+0x1a /home/rsc/g/go2/src/pkg/runtime/malloc.c:288
runtime.new(0x1, 0x0, 0x0)
gongo.makeBoard+0x33 /tmp/Gongo/gongo_robot_test.go:344
gongo.makeBoard(0x809d238, 0x1, 0xf76092c8, 0x1)
----- stack segment boundary -----
gongo.checkEasyScore+0xcc /tmp/Gongo/gongo_robot_test.go:287
gongo.checkEasyScore(0xf764b710, 0x0, 0x809d238, 0x1)
gongo.TestEasyScore+0x8c /tmp/Gongo/gongo_robot_test.go:255
gongo.TestEasyScore(0xf764b710, 0x818a990)
testing.tRunner+0x2f /home/rsc/g/go2/src/pkg/testing/testing.go:132
testing.tRunner(0xf764b710, 0xf763b5dc, 0x0)
runtime.goexit /home/rsc/g/go2/src/pkg/runtime/proc.c:149
runtime.goexit()
R=ken2, r
CC=golang-dev
https://golang.org/cl/4000053
If the same directory was used for multiple builds,
it was possible for a stale version.go to contain the
wrong definitions for $GOOS and $GOARCH, because
they can change even if the hg version does not.
Split into multiple files to fix.
R=r, r2
CC=golang-dev
https://golang.org/cl/4124050
Shame on me: I fixed the same bug in 6l in 8691fcc6a66e
(https://golang.org/cl/2609041) and neglected
to look at 5l and 8l to see if they were affected.
On the positive side, the check I added in that CL is the
one that detected this bug.
Fixes#1457.
R=ken2
CC=golang-dev
https://golang.org/cl/3981052
This aligns the naming scheme with the testing package and
also lets govet work on more logging calls.
R=rsc
CC=golang-dev
https://golang.org/cl/4001048
Make the error message and the needed action more obvious
when a command isn't found to obtain the source code
of a project. Users seem to strugle with the existing
wording in practice.
R=rsc
CC=golang-dev
https://golang.org/cl/4058047
The callback mechanism has been made more flexible.
Eliminated one round of argument copying in Syscall.
Faster Get/SetLastError implemented.
Added gettime for gc perf profiling.
R=rsc, brainman, mattn, rog
CC=golang-dev
https://golang.org/cl/4058046
The crypto package is added as a common place to store identifiers for
hash functions. At the moment, the rsa package has an enumeration of
hash functions and knowledge of their digest lengths. This is an
unfortunate coupling and other high level crypto packages tend to need
to duplicate this enumeration and knowledge (i.e. openpgp).
crypto pulls this code out into a common location.
It would also make sense to add similar support for ciphers to crypto,
but the problem there isn't as acute that isn't done in this change.
R=bradfitzgo, r, rsc
CC=golang-dev
https://golang.org/cl/4080046
The "all:" target is the default for running gomake
by hand, but it is not used during the build.
The build runs make install and make test.
Save the build of maketables for the test phase
so that the packages it needs will have been
installed already.
R=r, r2
CC=golang-dev
https://golang.org/cl/4121043
The sanity checking in pass 2 is wrong
when a select is offering to communicate in
either direction on a channel and neither case
is immediately ready.
R=ken2
CC=golang-dev
https://golang.org/cl/3991047
The old heap maps used a multilevel table, but that
was overkill: there are only 1M entries on a 32-bit
machine and we can arrange to use a dense address
range on a 64-bit machine.
The heap map is in bss. The assumption is that if
we don't touch the pages they won't be mapped in.
Also moved some duplicated memory allocation
code out of the OS-specific files.
R=r
CC=golang-dev
https://golang.org/cl/4118042
- complex numbers now supported.
- entirely independent of standard decode code.
- parser has no read-ahead; that is, the scanning works
simply by reading the values as they arrive, not by trying
to count bytes for message boundaries, a proof of concept
for the pending rewrite of the regular decoder.
R=rsc, r2
CC=golang-dev
https://golang.org/cl/4084044
It is unmaintained and untested, and I think it's broken too.
It was a toy to show that Go can run on real hardware,
and it served its purpose.
The source code will of course remain in the repository
history, so it could be brought back if needed later.
R=r, r2, uriel
CC=golang-dev
https://golang.org/cl/3996047
The implementation of the position computation
was surprisingly broken. Implemented fixes and
added extra test cases.
There is a slight interface change: Calling
Pos() returns the current position; but if
called before Scan() that position may not
be the position of the next token returned
by Scan() (depending on the scan settings
and the source text) - this in contrast to
the original comment.
However, after calling Scan(), the Scanner's
Position field reports the position of the
scanned token, as before.
Fixes#1327.
R=rsc
CC=golang-dev
https://golang.org/cl/3972047
Also simplify sleeper algorithm and poll
occasionally so redundant sleeper goroutines
will quit sooner.
R=r, niemeyer, r2
CC=golang-dev
https://golang.org/cl/4063043
The docstring claims the function uses PSS message encoding,
when the function actually implements PKCS1-v1_5 encoding.
R=agl1, rsc
CC=danderson, golang-dev
https://golang.org/cl/4097042
Init may report an error on the first character and
thus one needs an ability to set the error handler
for Init. Was a design bug.
Added corresponding test cases and better documentation.
Also: Fixed a subtle infinite loop exposed by one of the
new test cases.
Fixes#1380.
R=rsc, gri
CC=golang-dev
https://golang.org/cl/4094041
When parsing numbers with an exponent (like "12e-1"), the JSON scanner
would only allow a lowercase 'e', while the RFC also allows the
uppercase 'E'.
R=adg
CC=golang-dev, rsc
https://golang.org/cl/3986042
(or at least a correct encoder, still to come).
Change the debug structure slightly to better represent
the grammar.
Minor tweaks for consistency in type.go.
R=rsc
CC=golang-dev
https://golang.org/cl/4007044
The test code used to do this:
for _, tc := range tests {
ch <- &tc
}
Note that &tc is always the same value here. As the value is
received from the channel, the sender can loop around and
change the contents of tc. This means that the receiver's
value is unstable and can change while it is in use.
R=adg, r2, rsc
CC=chris, golang-dev
https://golang.org/cl/3978043
Close of closed channel panics.
Receive from closed channel never panics,
even if done repeatedly.
Fixes#1349.
Fixes#1419.
R=gri, iant, ken2, r, gri1, r2, iant2, rog, albert.strasheim, niemeyer, ejsherry
CC=golang-dev
https://golang.org/cl/3989042
Re-implement the debugging helper to be independent of the existing
implementation. This is preparatory to a rewrite to clean up issue 1416.
Include a definition of the grammar of the data stream.
R=rsc
CC=golang-dev
https://golang.org/cl/3970045
This was broken after the last update (2011-01-20).
However, I'm not sure if the changed example is a
sensible use of import(), so I'd appreciate comments.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/4067043
The functionality we want (shared ppid) is implied
by CLONE_THREAD already, and CLONE_PARENT
causes problems if the Go program is pid 1 (init).
See issue 1406 for more details.
Fixes#1406.
R=adg, iant
CC=golang-dev
https://golang.org/cl/3971044
The o+i*p approach to visiting select cases in random
order stops being fair when there is some case that
is never ready. If that happens, then the case that follows
it in the order gets more chances than the others.
In general the only way to ensure fairness is to make
all permutations equally likely. I've done that by computing
one explicitly.
Makes the permutations correct for n >= 4 where
previously they were broken. For n > 12, there's not
enough randomness to do a perfect job but this should
still be much better than before.
Fixes#1425.
R=r, ken2, ejsherry
CC=golang-dev
https://golang.org/cl/4037043
With the current implementation, xml unmarshalling
will silently fail to unmarshal any paths passing
through the same element, such as:
type T struct {
A string "dummy>a"
B string "dummy>b"
}
This change tweaks the algorithm so that this works
correctly.
Also, using paths that would cause the same element to
unmarshal twice will error out ahead of time explaining
the problem, rather than silently misbehaving.
R=rsc
CC=golang-dev
https://golang.org/cl/4082041
When data is received for a channel, but that channel
is not ready to receive it, the central run() loop
is currently blocked, but this can lead to deadlock
and interference between independent channels.
This CL adds an explicit buffer size to netchan
channels (an API change) - the sender will not
send values until the buffer is non empty.
The protocol changes to send ids rather than channel names
because acks can still be sent after a channel is hung up,
we we need an identifier that can be ignored.
R=r, rsc
CC=golang-dev
https://golang.org/cl/2447042
Also:
* document special cases for Frexp and Ldexp
* handle ±Inf in Ldexp
* correctly return -0 on underflow in Ldexp
* test special cases for Ldexp
* test boundary cases for Frexp, Ilogb, Ldexp, and Logb
R=rsc
CC=golang-dev
https://golang.org/cl/3676041
Minor cleanup:
- removed a duplicate test case
- added a function to remove repeated code
- for consistency, replaced "return nil" with a panic at an
unreachable point
Fixes#1428.
R=golang-dev, r, rsc
CC=golang-dev
https://golang.org/cl/4057042
RFC2616 sections 4.4 and 14.16:
* Cannot use Content-Length with non-identity Transfer-Encoding
* Content-Range response is "bytes x-y/z" not "x-y/z"
R=rsc
CC=golang-dev
https://golang.org/cl/4018041
For Windows, the options for syscall.Wait4() aren't used.
Then this will be dummy value like WNOHANG, WSTOPPED.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/4075041
This introduces support for selecting which subelement
to unmarshal into a given struct field by providing a
nesting path separated by the > character.
R=rsc
CC=golang-dev
https://golang.org/cl/4066041
Have to set #defines correctly to get correct value.
Otherwise get a mask for use in implementing WIFSTOPPED(status).
Changed WSTOPPED definition in os because on
OS X WSTOPPED and WUNTRACED have different values
even though they seem to mean the same thing.
Fixes#1374.
R=r, r2
CC=golang-dev
https://golang.org/cl/4063042
The fault was lucky: when it wasn't faulting it was silently
copying a word from some other block and later putting
that same word back. If some other goroutine had changed
that word of memory in the interim, too bad.
The ARM code was inconsistent about whether the
"argument frame" included the saved LR. Including it made
some things more regular but mostly just caused confusion
in the places where the regularity broke. Now the rule
reflects reality: argp is always a pointer to arguments,
never a saved link register.
Renamed struct fields to make meaning clearer.
Running ARM in QEMU, package time's gotest:
* before: 27/58 failed
* after: 0/50
R=r, r2
CC=golang-dev
https://golang.org/cl/3993041
In this specific package crosscall2 is already defined in a .S
file anyhow. This avoids a warning about mismatched
alignment.
R=rsc
CC=golang-dev
https://golang.org/cl/4000043
Introduced a printer mode (pmode) type and corresponding
pmode values which permit easy toggling of the current
printer mode for fine-tuning of layout.
Use the printer mode to disable potential introduction of
line breaks before a closing '}' in composite literals.
Added extra test case. Applied gofmt to src and misc.
Fixes#1365.
R=r2
CC=golang-dev
https://golang.org/cl/4008041
Until now, each scan of a file added a new file to the file set.
With this change, a file can be re-scanned using the same *token.File
w/o changing the file set. Eventually this will enable the re-use of
cached source code in godoc (for the fulltext index). At the moment,
source files are read over and over again from disk.
This is the first step in that direction.
R=r, rsc, r2
CC=golang-dev
https://golang.org/cl/4001041
Also adds some tests for Issue 900 which was the reason
the current URL parsing is broken. (the previous fix
was wrong)
R=rsc, adg, dangabrad, bradfitzwork
CC=golang-dev
https://golang.org/cl/3910042
This implements the algorithm qsufsort using the sort package
as a sorting primitive. Its worst-case performance is O(N*log(N)), and it
uses only an additional slice of N ints of memory during creation.
Benchmarks (seconds):
old new
10k nulls 149 0.044
1M English corpus 32.0 3.6
R=gri, gri1
CC=golang-dev
https://golang.org/cl/3752044
error is needed by all the OpenPGP packages as they return a shared
family of error types.
armor implements OpenPGP armoring. It's very like PEM except:
a) it includes a CRC24 checksum
b) PEM values are small (a few KB) and so encoding/pem assumes that
they fit in memory. Armored data can be very large and so this
package presents a streaming interface.
R=r, nsz, rsc
CC=golang-dev
https://golang.org/cl/3786043
I missed that environment is used during runtime setup,
well before go init() functions run. Implemented os-dependent
runtime.goenvs functions to allow for different unix, plan9 and
windows versions of environment discovery.
R=rsc, paulzhol
CC=golang-dev
https://golang.org/cl/3787046
In the case where r.Method == "POST", was
calling Printf with an argument but "" format string,
causing a spurious %!EXTRA(...) message.
Also escape string properly in HTML generation.
R=r
CC=golang-dev
https://golang.org/cl/3923043
A few system call numbers on x86 Linux are
defined in terms of a previous definition,
e.g.,
#define __NR_timer_create 259
#define __NR_timer_settime (__NR_timer_create+1)
...
#define __NR_mq_open 277
#define __NR_mq_unlink (__NR_mq_open+1)
This change assumes the numbers are sorted
sequentially in the input file.
R=rsc, bradfitzwork
CC=golang-dev
https://golang.org/cl/3946041
The After code is trivially generalisable to provide support
for this, and it is possible to use AfterFunc to do
things that After cannot, such as waiting
for many events at varied times without an overhead
of one goroutine per event.
R=rsc, r
CC=golang-dev
https://golang.org/cl/3905041
- added position information for [ and ] brackets of Index and Slice expression nodes
- removed a TODO in go/printer
R=r, rsc
CC=golang-dev
https://golang.org/cl/3867045
If we don't do this, then when C code calls back to Go code
which panics, we lose space on the scheduler stack. If that
happens a lot, eventually there is no space left on the
scheduler stack.
R=rsc
CC=golang-dev
https://golang.org/cl/3898042
Not absolutely certain it's right to do this, but since there's
no error value coming back, it seems reasonable.
Fixes#1392.
R=rsc, adg
CC=golang-dev
https://golang.org/cl/3896042
A cursory reading of the cgo code suggests this
should be necessary, though I don't have access
to a FreeBSD machine for testing.
R=rsc, adg
CC=golang-dev
https://golang.org/cl/3746047
The old loop was a bit odd; change it to be more regular.
This also enables a diagnostic for Printf("%", 3): %!(NOVERB)
R=rsc, Kyle C
CC=golang-dev
https://golang.org/cl/3749044
- add End() method to all nodes; the text range of a node n is [n.Pos(), n.End())
- various small bug fixes in the process
- fixed several comments
R=r, rsc
CC=golang-dev
https://golang.org/cl/3769042
After a prefix match, the old code advanced the length of the
prefix. This is incorrect since the full match might begin
in the middle of the prefix. (Consider "aaaab+" matching
"aaaaaab").
Fixes#1373
R=rsc
CC=golang-dev
https://golang.org/cl/3795044
The bug was that for an anchored pattern such as ^x, the prefix
scan ignored the anchor, and could scan the whole file if there was
no x present. The fix is to do prefix matching after the anchor;
the cost miniscule; the speedups huge.
R=rsc, gri
CC=golang-dev
https://golang.org/cl/3837042
Implementation uses fast suffixarray lookup to find
initial matches if the regular expression starts with
a suitable prefix without meta characters.
R=r, rsc
CC=golang-dev
https://golang.org/cl/3720042
#pragma dynexport is no longer needed for
this use of cgo, since the gcc and gc code are
now linked together into the same binary.
It may still be necessary later.
On the Mac, you cannot use the GOT to resolve
symbols that exist in the current binary, so 6l and 8l
translate the GOT-loading mov instructions into lea
instructions.
On ELF systems, we could use the GOT for those
symbols, but for consistency 6l and 8l apply the
same translation.
The translation is sketchy in the extreme
(depending on the relocation being in a mov
instruction) but it verifies that the instruction
is a mov before rewriting it to lea.
Also makes typedefs global across files.
Fixes#1335.
Fixes#1345.
R=iant, r
CC=golang-dev
https://golang.org/cl/3650042
The former is a boolean function to test whether a string
contains a regular expression metacharacter; the second
returns the string used to compile the regexp.
R=gri, rsc
CC=golang-dev
https://golang.org/cl/3728041
It was only used by exp/4s, and even if it is general purpose, I think
it belongs in a graphics library atop exp/draw, not in exp/draw itself.
R=rsc
CC=golang-dev
https://golang.org/cl/3705041
This is largely based on ality's CL 2747042.
crypto/rc4: API break in order to conform to crypto/cipher's
Stream interface
cipher/cipher: promote to the default build
Since CBC differs between TLS 1.0 and 1.1, we downgrade and
support only 1.0 at the current time. 1.0 is what most of the
world uses.
Given this CL, it would be trival to add support for AES 256,
SHA 256 etc, but I haven't in order to keep the change smaller.
R=rsc
CC=ality, golang-dev
https://golang.org/cl/3659041
The recent linker changes broke NaCl support
a month ago, and there are no known users of it.
The NaCl code can always be recovered from the
repository history.
R=adg, r
CC=golang-dev
https://golang.org/cl/3671042
This Flush is equivalent to zlib's Z_SYNC_FLUSH.
The addition of the explicit Writer type opens the
door to adding a PartialFlush if needed for SSH
and maybe even FullFlush. It also opens the door
for a SetDictionary method to be added.
http://www.bolet.org/~pornin/deflate-flush.html
documents the various intricacies of flushing a
DEFLATE stream.
R=agl1, r
CC=golang-dev
https://golang.org/cl/3637041
The code used interfaces in a pretty, pedagogical way but not efficiently.
Remove unnecessary interface code for significant speedups.
Before:
regexp.BenchmarkLiteral 1000000 2629 ns/op
regexp.BenchmarkNotLiteral 100000 18131 ns/op
regexp.BenchmarkMatchClass 100000 26647 ns/op
regexp.BenchmarkMatchClass_InRange 100000 27092 ns/op
regexp.BenchmarkReplaceAll 100000 27014 ns/op
After:
regexp.BenchmarkLiteral 1000000 2077 ns/op
regexp.BenchmarkNotLiteral 100000 13738 ns/op
regexp.BenchmarkMatchClass 100000 20418 ns/op
regexp.BenchmarkMatchClass_InRange 100000 20999 ns/op
regexp.BenchmarkReplaceAll 100000 21825 ns/op
There's likely more to do without major surgery, but this is a simple, significant step.
R=rsc
CC=golang-dev
https://golang.org/cl/3572042
Too many programs complain that we even try.
This was a bit of security paranoia and not worth
the bother.
Fixes#1340.
R=r, r2
CC=golang-dev
https://golang.org/cl/3579042
cc: same
runtime: test cc alignment (required moving #define of offsetof to runtime.h)
fix bug260
Fixes#482.
Fixes#609.
R=ken2, r
CC=golang-dev
https://golang.org/cl/3563042
- change Walk signature to use an ast.Node instead of interface{}
- add Pos functions to a couple of ast types to make them proper nodes
- explicit nil checks where a node can be nil; incorrect ASTs cause Walk to crash
For now ast.Walk is exercised extensively as part of godoc's indexer;
so we have some confidence in its correctness. But this needs a test,
eventually.
Fixes#1326.
R=rsc, r
CC=golang-dev
https://golang.org/cl/3481043
This patch adds a new package: os/inotify, which
provides a Go wrapper to the Linux inotify system.
R=rsc, albert.strasheim, rog, jacek.masiulaniec
CC=golang-dev
https://golang.org/cl/2049043
At the moment, and for the forseeable future, it only checks arguments to print calls.
R=rsc, gri, niemeyer, iant2, rog, lstoakes, jacek.masiulaniec, cw
CC=golang-dev
https://golang.org/cl/3522041
One of my own experiments ended up getting mistakenly commited when
switching to Jacobian transformations.
R=rsc
CC=golang-dev
https://golang.org/cl/3473044
Formerly known as libcgo.
Almost no code here is changing; the diffs
are shown relative to the originals in libcgo.
R=r
CC=golang-dev
https://golang.org/cl/3420043
The name ParseFile was kept as it indicates that
this function parses a Go 'SourceFile' per the
Go spec. Similarly, the other functions (ParseExpr,
ParseStmtList, ParseDeclList) parse the corresponding
constructs as defined in the Go spec.
Fixes#1311.
R=r, rsc
CC=golang-dev
https://golang.org/cl/3453042
I have written a tool to verify Printf calls, and although it's not
ready to be reviewed yet it's already uncovered a spate of problems
in the repository. I'm sending this CL to break the changes into
pieces; as the tool improves it will find more, I'm sure.
R=rsc
CC=golang-dev
https://golang.org/cl/3427043
Specifically:
* lib/godoc:
- provide file set (FSet) argument to formatters where needed
* src/cmd:
- cgo, ebnflint, godoc, gofmt, goinstall: provide file set (fset) where needed
- godoc: remove local binary search with sort.Search (change by rsc),
extract file set for formatters
* src/pkg:
- exp/eval: remove embedded token.Position fields from nodes and replace
with named token.Pos fields; add corresponding Pos() accessor methods
- go/token: added file.Line(), changed signature of File.Position()
* test/fixedbugs/:
- bug206.go: change test to not rely on token.Pos details
* added various extra comments
* Runs all.bash
* gofmt formats all of src, misc w/o changes
* godoc runs
* performance:
- The new version of godoc consumes about the same space after indexing
has completed, but indexing is half the speed. Significant space savings
are expected from smaller ASTs, but since they are thrown away after a
file has been indexed, this is not visible anymore. The slower indexing
time is due to the much more expensive computation of line information.
However, with the new compressed position information, indexing can be
rewritten and simplified. Furthermore, computing the line info can be
done more efficiently.
New godoc, immediately after indexing completed (best of three runs):
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
44381 godoc 0.0% 0:38.00 4 19 149 145M 184K 148M 176M
2010/12/03 17:58:35 index updated (39.231s, 18505 unique words, 386387 spots)
2010/12/03 17:58:35 bytes=90858456 footprint=199182584
2010/12/03 17:58:36 bytes=47858568 footprint=167295224
Old godoc, immediately after indexing completed (best of three runs):
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
23167 godoc 0.0% 0:22.02 4 17 132 129M 184K 132M 173M
2010/12/03 14:51:32 index updated (24.892s, 18765 unique words, 393830 spots)
2010/12/03 14:51:32 bytes=66404528 footprint=163907832
2010/12/03 14:51:32 bytes=46282224 footprint=163907832
The different numbers for unique words/spots stem from the fact the the
two workspaces are not exactly identical. The new godoc maintains a large
file set data structure during indexing which (probably) is the reason
for the larger heap (90858456 vs 66404528) before garbage collection.
R=rsc, r
CC=golang-dev
https://golang.org/cl/3050041
8l was broken by commit 7ac0d2eed9, it caused .data to be page aligned in the file - which is not how Plan 9 expects things to be.
Also .rodata was layed out in a similar fashion.
Not sure when signame was introduced, but added a stub.
Removed the symo assignment in asm.c as it is not currently used.
Fix runtime breakage after commit 629c065d36 which prefixes all external symbols with runtime·.
R=rsc
CC=golang-dev
https://golang.org/cl/2674041
Note:
* Exp2 doesn't have a special case for very small arguments
* Exp2 hasn't been subject to a proper error analysis
Also:
* add tests for Exp2 with integer argument
* always test Go versions of Exp and Exp2
R=rsc
CC=Charlie Dorian, PeterGo, golang-dev
https://golang.org/cl/3481041
fmt.Printf("%U", 1) yields "U+0001"
It's essentially "U+%.4x" but lets you override the precision works in scan, too.
R=rsc
CC=golang-dev
https://golang.org/cl/3423043
Doing the tail recursion elimination explicitly
seems safer than leaving it to the compiler;
the code is still clean and easy to understand.
R=r, r2, gri
CC=golang-dev
https://golang.org/cl/3373041
Before one could say
{field}
or
{field|formatter}
Now one can also say
{field1 field2 field3}
or
{field1 field2 field3|formatter}
and the fields are passed as successive arguments to the formatter,
analogous to fmt.Print.
R=rsc, gri
CC=golang-dev
https://golang.org/cl/3385041
Make them more like Printf, with a ... final argument. This breaks
code with existing formatters but not the templates that use them.
R=rsc, gri
CC=golang-dev
https://golang.org/cl/3378041
Changed all uses of bytes.Add (aside from those testing bytes.Add) to append(a, b...).
Also ran "gofmt -s" and made use of copy([]byte, string) in the fasta benchmark.
R=golang-dev, r, r2
CC=golang-dev
https://golang.org/cl/3302042
This means that any Writer can be used safely
even when Output is called concurrently.
Fixes#1302.
R=r, nigeltao_gnome
CC=golang-dev
https://golang.org/cl/3300042
Make Split work on backslashes as well as on slashes under Windows
and support the "C:filename" special case. Also add corresponding
tests.
R=r, rsc, PeterGo, r2, brainman
CC=golang-dev
https://golang.org/cl/3008041
