If the current time is equal to the NextUpdate time, then the CRL
should be considered expired.
Fixes#22568.
Change-Id: I55bcc95c881097e826d43eb816a43b9b377b0265
Reviewed-on: https://go-review.googlesource.com/71972
Reviewed-by: Adam Langley <agl@golang.org>
Reviewed-by: Filippo Valsorda <hi@filippo.io>
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use internal/testenv package to get the right go binary.
Otherwise, I think we're just grabbing an old one from the environment.
Fixes#22560.
Change-Id: Id5b743b24717e15ec8ffbcfae4dc3e5f6a87b9a9
Reviewed-on: https://go-review.googlesource.com/76090
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: David Chase <drchase@google.com>
Otherwise, one can't run "go fmt" on a directory containing Go files if
none of them are buildable (e.g. because of build tags). This is
counter-intuitive, as fmt will format all Go files anyway.
If we encounter such a load error, ignore it and carry on. All other
load errors, such as when a package can't be found, should still be
shown to the user.
Add a test for the two kinds of load errors. Use fmt -n so that any
changes to the formatting of the files in testdata don't actually get
applied. The load errors still occur with -n, so the test does its job.
Fixes#22183.
Change-Id: I99d0c0cdd29015b6a3f5286a9bbff50757c78e0d
Reviewed-on: https://go-review.googlesource.com/75930
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
A statement like
foo = bar + qux
might compile to
AX := AX + BX
resulting in a regkill for AX before this instruction.
The buggy behavior is to kill AX "at" this instruction,
before it has executed. (Code generation of no-instruction
values like RegKills applies their effects at the
next actual instruction emitted).
However, bar is still associated with AX until after the
instruction executes, so the effect of the regkill must
occur at the boundary between this instruction and the
next. Similarly, the new value bound to AX is not visible
until this instruction executes (and in the case of values
that require multiple instructions in code generation, until
all of them have executed).
The ranges are adjusted so that a value's start occurs
at the next following instruction after its evaluation,
and the end occurs after (execution of) the first
instruction following the end of the lifetime as a value.
(Notice the asymmetry; the entire value must be finished
before it is visible, but execution of a single instruction
invalidates. However, the value *is* visible before that
next instruction executes).
The test was adjusted to make it insensitive to the result
numbering for variables printed by gdb, since that is not
relevant to the test and makes the differences introduced
by small changes larger than necessary/useful.
The test was also improved to present variable probes
more intuitively, and also to allow explicit indication
of "this variable was optimized out"
Change-Id: I39453eead8399e6bb05ebd957289b112d1100c0e
Reviewed-on: https://go-review.googlesource.com/74090
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For structs, slices, strings, interfaces, etc, propagation of
names to their components (e.g., complex.real, complex.imag)
is fragile (depends on phase ordering) and not done right
for the "dec" pass.
The dec pass is subsumed into decomposeBuiltin,
and then names are pushed into the args of all
OpFooMake opcodes.
compile/ssa/debug_test.go was fixed to pay attention to
variable values, and the reference files include checks
for the fixes in this CL (which make debugging better).
Change-Id: Ic2591ebb1698d78d07292b92c53667e6c37fa0cd
Reviewed-on: https://go-review.googlesource.com/73210
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This test was taking too long on ppc64x.
There were a few reasons.
The first is that the page size on ppc64x is 64k instead of 4k.
That's 16x more work.
The second is that the generic Index is pretty bad in this case.
It first calls IndexByte which does a bunch of setup work only to find
the byte we're looking for at index 0. Then it calls Equal which
has to look at the whole string to find a difference on the last byte.
To fix, just limit our attention to near the end of the page.
Change-Id: I6b8bcbb94652a2da853862acc23803def0c49303
Reviewed-on: https://go-review.googlesource.com/76050
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This change adds code generation tests for multiplication by ±2ⁿ for
arm and arm64, in preparation for a future CL which will remove the
relevant architecture-specific SSA rules (the reduction is already
performed by rules in generic.rules added in CL 36323).
Change-Id: Iebdd5c3bb2fc632c85888569ff0c49f78569a862
Reviewed-on: https://go-review.googlesource.com/75752
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This makes the output they print refer to the code that called them.
For example, instead of
=== RUN TestWindowsStackMemoryCgo
--- SKIP: TestWindowsStackMemoryCgo (0.00s)
testenv.go:213: skipping known flaky test ...
PASS
we see
=== RUN TestWindowsStackMemoryCgo
--- SKIP: TestWindowsStackMemoryCgo (0.00s)
crash_cgo_test.go:471: skipping known flaky test ...
PASS
Change-Id: I5f4c77c3aeab5c0e43c6dde2f15db70a6df24603
Reviewed-on: https://go-review.googlesource.com/76031
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The go repository contains a mix of github.com/golang/go/issues/xxxxx
and golang.org/issues/xxxxx URLs for references to issues in the issue
tracker. We should use one for consistency, and golang.org is preferred
in case the project moves the issue tracker in the future.
This reasoning is taken from a comment Sam Whited left on a CL I
recently opened: https://go-review.googlesource.com/c/go/+/73890.
In that CL I referenced an issue using its github.com URL, because other
tests in the file I was changing contained references to issues using
their github.com URL. Sam Whited left a comment on the CL stating I
should change it to the golang.org URL.
If new code is intended to reference issues via golang.org and not
github.com, existing code should be updated so that precedence exists
for contributors who are looking at the existing code as a guide for the
code they should write.
Change-Id: I3b9053fe38a1c56fc101a8b7fd7b8f310ba29724
Reviewed-on: https://go-review.googlesource.com/75673
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Example usage of functionality implemented in CL 66710.
Change-Id: I87d6e4d2fb7a60e4ba1e6ef02715480eb7e8f8bd
Reviewed-on: https://go-review.googlesource.com/76011
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Introduce the presence of the monotonic time reading first,
before the paragraph about comparison that mentions it multiple times.
Change-Id: I91e31e118be013eee6c258163a1bb2cb42501527
Reviewed-on: https://go-review.googlesource.com/76010
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL makes "go install" behave the way many users expect:
install only the things named on the command line.
Future builds still run as fast, thanks to the new build cache (CL 75473).
To install dependencies as well (the old behavior), use "go install -i".
Actual definitions aside, what most users know and expect of "go install"
is that (1) it installs what you asked, and (2) it's fast, unlike "go build".
It was fast because it installed dependencies, but installing dependencies
confused users repeatedly (see for example #5065, #6424, #10998, #12329,
"go build" and "go test" so that they could be "fast" too, but that only
created new opportunities for confusion. We also had to add -installsuffix
and then -pkgdir, to allow "fast" even when dependencies could not be
installed in the usual place.
The recent introduction of precise content-based staleness logic means that
the go command detects the need for rebuilding packages more often than it
used to, with the consequence that "go install" rebuilds and reinstalls
dependencies more than it used to. This will create more new opportunities
for confusion and will certainly lead to more issues filed like the ones
listed above.
CL 75743 introduced a build cache, separate from the install locations.
That cache makes all operations equally incremental and fast, whether or
not the operation is "install" or "build", and whether or not "-i" is used.
Installing dependencies is no longer necessary for speed, it has confused
users in the past, and the more accurate rebuilds mean that it will confuse
users even more often in the future. This CL aims to end all that confusion
by not installing dependencies by default.
By analogy with "go build -i" and "go test -i", which still install
dependencies, this CL introduces "go install -i", which installs
dependencies in addition to the things named on the command line.
Fixes#5065.
Fixes#6424.
Fixes#10998.
Fixes#12329.
Fixes#18981.
Fixes#22469.
Another step toward #4719.
Change-Id: I3d7bc145c3a680e2f26416e182fa0dcf1e2a15e5
Reviewed-on: https://go-review.googlesource.com/75850
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This CL adds an automatic, limited "go vet" to "go test".
If the building of a test package fails, vet is not run.
If vet fails, the test is not run.
The goal is that users don't notice vet as part of the "go test"
process at all, until vet speaks up and says something important.
This should help users find real problems in their code faster
(vet can just point to them instead of needing to debug a
test failure) and expands the scope of what kinds of things
vet can help with.
The "go vet" runs in parallel with the linking of the test binary,
so for incremental builds it typically does not slow the overall
"go test" at all: there's spare machine capacity during the link.
all.bash has less spare machine capacity. This CL increases
the time for all.bash on my laptop from 4m41s to 4m48s (+2.5%)
To opt out for a given run, use "go test -vet=off".
The vet checks used during "go test" are a subset of the full set,
restricted to ones that are 100% correct and therefore acceptable
to make mandatory. In this CL, that set is atomic, bool, buildtags,
nilfunc, and printf. Including printf is debatable, but I want to
include it for now and find out what needs to be scaled back.
(It already found one real problem in package os's tests that
previous go vet os had not turned up.)
Now that we can rely on type information it may be that printf
should make its function-name-based heuristic less aggressive
and have a whitelist of known print/printf functions.
Determining the exact set for Go 1.10 is #18085.
Running vet also means that programs now have to type-check
with both cmd/compile and go/types in order to pass "go test".
We don't start vet until cmd/compile has built the test package,
so normally the added go/types check doesn't find anything.
However, there is at least one instance where go/types is more
precise than cmd/compile: declared and not used errors involving
variables captured into closures.
This CL includes a printf fix to os/os_test.go and many declared
and not used fixes in the race detector tests.
Fixes#18084.
Change-Id: I353e00b9d1f9fec540c7557db5653e7501f5e1c9
Reviewed-on: https://go-review.googlesource.com/74356
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This CL adds caching of successful test results, keyed by the
action ID of the test binary and its command line arguments.
Suppose you run:
go test -short std
<edit a typo in a comment in math/big/float.go>
go test -short std
Before this CL, the second go test would re-run all the tests
for the std packages. Now, the second go test will use the cached
result immediately (without any compile or link steps) for any
packages that do not transitively import math/big, and then
it will, after compiling math/big and seeing that the .a file didn't
change, reuse the cached test results for the remaining packages
without any additional compile or link steps.
Suppose that instead of editing a typo you made a substantive
change to one function, but you left the others (including their
line numbers) unchanged. Then the second go test will re-link
any of the tests that transitively depend on math/big, but it still
will not re-run the tests, because the link will result in the same
test binary as the first run.
The only cacheable test arguments are:
-cpu
-list
-parallel
-run
-short
-v
Using any other test flag disables the cache for that run.
The suggested argument to mean "turn off the cache" is -count=1
(asking "please run this 1 time, not 0").
There's an open question about re-running tests when inputs
like environment variables and input files change. For now we
will assume that users will bypass the test cache when they
need to do so, using -count=1 or "go test" with no arguments.
This CL documents the new cache but also documents the
previously-undocumented distinction between "go test" with
no arguments (now called "local directory mode") and with
arguments (now called "package list mode"). It also cleans up
a minor detail of package list mode buffering that used to change
whether test binary stderr was sent to go command stderr based
on details like exactly how many packages were listed or
how many CPUs the host system had. Clearly the file descriptor
receiving output should not depend on those, so package list mode
now consistently merges all output to stdout, where before it
mostly did that but not always.
Fixes#11193.
Change-Id: I120edef347b9ddd5b10e247bfd5bd768db9c2182
Reviewed-on: https://go-review.googlesource.com/75631
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Right rotation is achieved using negative k in RotateLeft*(x, k). Add
examples demonstrating that functionality.
Change-Id: I15dab159accd2937cb18d3fa8ca32da8501567d3
Reviewed-on: https://go-review.googlesource.com/75371
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
CL 65071 enabled inlining for local closures with no captures.
To determine safety of inlining a call sites, we check whether the
variable holding the closure has any assignments after its original
definition.
Unfortunately, that check did not catch OAS2MAPR and OAS2DOTTYPE,
leading to incorrect inlining when a variable holding a closure was
subsequently reassigned through a type conversion or a 2-valued map
access.
There was another more subtle issue wherein reassignment check would
always return a false positive for closure calls inside other
closures. This was caused by the Name.Curfn field of local variables
pointing to the OCLOSURE node instead of the corresponding ODCLFUNC,
which resulted in reassigned walking an empty Nbody and thus never
seeing any reassignments.
This CL fixes these oversights and adds many more tests for closure
inlining which ensure not only that inlining triggers but also the
correctness of the resulting code.
Updates #15561
Change-Id: I74bdae849c4ecfa328546d6d62b512e8d54d04ce
Reviewed-on: https://go-review.googlesource.com/75770
Reviewed-by: Hugues Bruant <hugues.bruant@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This avoids the problem in which appending to a slice returned by
Split can affect subsequent slices.
Fixes#21149.
Change-Id: Ie3df2b9ceeb9605d4625f47d49073c5f348cf0a1
Reviewed-on: https://go-review.googlesource.com/74510
Reviewed-by: Jelte Fennema <github-tech@jeltef.nl>
Reviewed-by: Robert Griesemer <gri@golang.org>
Make sure Index and IndexByte don't read past the queried byte slice.
Hopefully will be helpful for CL 33597.
Also remove the code which maps/unmaps the Go heap.
Much safer to play with protection bits off-heap.
Change-Id: I50d73e879b2d83285e1bc7c3e810efe4c245fe75
Reviewed-on: https://go-review.googlesource.com/75890
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This adds new rules to recognize consecutive byte loads and
stores and lowers them to loads and stores such as lhz, lwz, ld,
sth, stw, std. This change only covers the little endian cases
on little endian machines, such as is found in encoding/binary
UintXX or PutUintXX for little endian. Big endian will be done
later.
Updates were also made to binary_test.go to allow the benchmark
for Uint and PutUint to actually use those functions because
the way they were written, those functions were being
optimized out.
Testcases were also added to cmd/compile/internal/gc/asm_test.go.
Updates #22496
The following improvement can be found in golang.org/x/crypto
poly1305:
Benchmark64-16 142 114 -19.72%
Benchmark1K-16 1717 1424 -17.06%
Benchmark64Unaligned-16 142 113 -20.42%
Benchmark1KUnaligned-16 1721 1428 -17.02%
chacha20poly1305:
BenchmarkChacha20Poly1305Open_64-16 1012 885 -12.55%
BenchmarkChacha20Poly1305Seal_64-16 971 836 -13.90%
BenchmarkChacha20Poly1305Open_1350-16 11113 9539 -14.16%
BenchmarkChacha20Poly1305Seal_1350-16 11013 9392 -14.72%
BenchmarkChacha20Poly1305Open_8K-16 61074 53431 -12.51%
BenchmarkChacha20Poly1305Seal_8K-16 61214 54806 -10.47%
Other improvements of around 10% found in crypto/tls.
Results after updating encoding/binary/binary_test.go:
BenchmarkLittleEndianPutUint64-16 1.87 0.93 -50.27%
BenchmarkLittleEndianPutUint32-16 1.19 0.93 -21.85%
BenchmarkLittleEndianPutUint16-16 1.16 1.03 -11.21%
Change-Id: I7bbe2fbcbd11362d58662fecd907a0c07e6ca2fb
Reviewed-on: https://go-review.googlesource.com/74410
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Unlike the legacy text format that outputs the count and the number of
cycles, the pprof tool expects contention profiles to include the count
and the delay time measured in nanoseconds. printCountCycleProfile
performs the conversion from cycles to nanoseconds.
(See parseContention function in
cmd/vendor/github.com/google/pprof/profile/legacy_profile.go)
Fixes#21474
Change-Id: I8e8fb6ea803822d7eaaf9ecf1df3e236ad225a7b
Reviewed-on: https://go-review.googlesource.com/64410
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The name of the temporary directory containing _testmain.go
was leaking into the binary.
Found with GODEBUG=gocacheverify=1 go test std.
Change-Id: I5b35f049b564f3eb65c6a791ee785d15255c7885
Reviewed-on: https://go-review.googlesource.com/75630
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
We build and run executables in the work directory,
and some users have $TMPDIR set noexec.
Fixes#8451.
Change-Id: I76bf2ddec84e9cb37ad9a6feb53a1a84b47aa263
Reviewed-on: https://go-review.googlesource.com/75475
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This CL adds caching of built package files in $GOCACHE, so that
a second build with a particular configuration will be able to reuse
the work done in the first build of that configuration, even if the
first build was only "go build" and not "go install", or even if there
was an intervening "go install" that wiped out the installed copy of
the first build.
The benchjuju benchmark runs go build on a specific revision of jujud 10 times.
Before this CL:
102.72u 15.29s 21.98r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
105.99u 15.55s 22.71r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
106.49u 15.70s 22.82r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
107.09u 15.72s 22.94r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
108.19u 15.85s 22.78r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
108.92u 16.00s 23.02r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
109.25u 15.82s 23.05r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
109.57u 15.96s 23.11r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
109.86u 15.97s 23.17r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
110.50u 16.05s 23.37r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
After this CL:
113.66u 17.00s 24.17r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
3.85u 0.68s 3.49r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
3.98u 0.72s 3.63r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
4.07u 0.72s 3.57r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
3.98u 0.70s 3.43r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
4.58u 0.70s 3.58r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
3.90u 0.70s 3.46r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
3.85u 0.71s 3.52r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
3.70u 0.69s 3.64r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
3.79u 0.68s 3.41r go build -o /tmp/jujud github.com/juju/juju/cmd/jujud ...
This CL reduces the overall all.bash time from 4m22s to 4m17s on my laptop.
Not much faster, but also not slower.
See also #4719, #20137, #20372.
Change-Id: I101d5363f8c55bf4825167a5f6954862739bf000
Reviewed-on: https://go-review.googlesource.com/75473
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The README is there to help people who stumble across the directory.
The access log is there to help us evaluate potential algorithms for
managing and pruning cache directories. For now the management
is manual: users have to run "go clean -cache" if they want the cache
to get smaller.
As a low-resolution version of the access log, we also update the
mtime on each cache file as they are used by the go command.
A simple refinement of go clean -cache would be to delete
(perhaps automatically) cache files that have not been used in more
than one day, or some suitable time period.
Change-Id: I1dd6309952942169d71256c4b50b723583d21fca
Reviewed-on: https://go-review.googlesource.com/75471
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Give users a way to remove their caches.
Change-Id: I0b041aa54b318e98605675f168fed54ab9b6fd14
Reviewed-on: https://go-review.googlesource.com/75470
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The current GOROOT documentation could indicate that changing the
environment variable at runtime would affect the return value of
GOROOT. This is false as the returned value is the one used for the
build. This CL aims to clarify the confusion.
Fixes#22302
Change-Id: Ib68c30567ac864f152d2da31f001a98531fc9757
Reviewed-on: https://go-review.googlesource.com/75751
Reviewed-by: Russ Cox <rsc@golang.org>
This change applies x86avxgen output.
https://go-review.googlesource.com/c/arch/+/66972
As an effect, many new AVX instructions are now available.
One of the side-effects of this patch is
sorted AXXX (A-enum) constants.
Some AVX1/2 instructions still not added due to:
1. x86.csv V0.2 does not list them;
2. partially because of (1), test suite does not contain tests for
these instructions.
Change-Id: I90430d773974ca5c995d6950d90e2c62ec88ef47
Reviewed-on: https://go-review.googlesource.com/75490
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
BFC (Bit Field Clear) and BFI (Bit Field Insert) were
introduced in ARMv6T2, and the compiler can use them
to do further optimization.
Change-Id: I5a3fbcd2c2400c9bf4b939da6366c854c744c27f
Reviewed-on: https://go-review.googlesource.com/72891
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
With GOBUILDTIMELOGFILE set, make.bash logs the starting time using
$ echo $(date) > file
and expects to be able to read the date back with
time.Parse(time.UnixDate)
but in some locales the default date format is not the same as
time.UnixDate; for example on LC_TIME="en_GB.UTF-8"
$ locale date_fmt
%a %e %b %H:%M:%S %Z %Y
Fix this by setting LC_TIME=C before the date command invocation.
Fixes#22541
Change-Id: I59bf944bb868e2acdd816c7e35134780cdbfc6a6
Reviewed-on: https://go-review.googlesource.com/75370
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The current code can potentially return a smaller processor count on a
linux kernel when its cpumask_size (controlled by both kernel config and
boot parameter) is not a multiple of the pointer size, because
r/sys.PtrSize will be rounded down. Since sched_getaffinity returns the
size in bytes, we can just allocate the buf as a byte array to avoid the
extra calculation with the pointer size and roundups.
Change-Id: I0c21046012b88d8a56b5dd3dde1d158d94f8eea9
Reviewed-on: https://go-review.googlesource.com/75591
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Instead of trying to validate map key types eagerly in some
cases, delay their validation to the end of type-checking,
when we all type information is present.
Passes go build -toolexec 'toolstash -cmp' -a std .
Fixes#21273.
Fixes#21657.
Change-Id: I532369dc91c6adca1502d6aa456bb06b57e6c7ff
Reviewed-on: https://go-review.googlesource.com/75310
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The godoc for RoundTrip already specifies when it's ok to reuse a
request that contains a body: the caller must wait until RoundTrip
calls Close on Request.Body.
This CL adds a small clarification: If the request does not have a
body, it can be reused as long as the caller does not mutate the
Request until RoundTrip fails or the Response.Body is closed.
Fixes#19653
Change-Id: I56652a9369978d11650e2e6314104831c2ce5e78
Reviewed-on: https://go-review.googlesource.com/75671
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Usage of atomic.Value has a subtle requirement that the
value be of the same concrete type. In prior usage, the intention
was to consistently store a value of the error type.
Since error is an interface, the underlying concrete can differ.
Fix this by creating a type-safe abstraction over atomic.Value
that wraps errors in a struct{error} type to ensure consistent types.
Change-Id: Ica74f2daba15e4cff48d2b4f830d2cb51c608fb6
Reviewed-on: https://go-review.googlesource.com/75594
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The existing implementation names a c net.Conn return which is
never user. Leaving the returns unamed is marginally clearer.
Change-Id: If9a411c9235b78c116a8ffb21fef71f7a4a4ce8f
Reviewed-on: https://go-review.googlesource.com/66890
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Prior to this CL loads with sign extension could not be replaced with
indexed loads (only loads with zero extension).
This CL also prevents large offsets (more than 20-bits) from being
merged into indexed loads. It is better to keep such offsets
separate.
Gives a small improvement in binary size, ~1.5KB from .text in cmd/go.
Change-Id: Ib848ffc2b05de6660c5ce2394ae1d1d144273e29
Reviewed-on: https://go-review.googlesource.com/36845
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
These are likely from the time when gc was written in C. There is no
need for any of these to be passed pointers, as the previous values are
not kept in any way, and the pointers are never nil. Others were left
untouched as they fell into one of these useful cases.
While at it, also turn some 0/1 integers into booleans.
Passes toolstash -cmp on std cmd.
Change-Id: Id3a9c9e84ef89536c4dc69a7fdbacd0fd7a76a9b
Reviewed-on: https://go-review.googlesource.com/72990
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates #22540
Change-Id: I26e79c25652976fac6f2e5a7afb4fd1240996d74
Reviewed-on: https://go-review.googlesource.com/75531
Reviewed-by: Tom Bergan <tombergan@google.com>
Run-TryBot: Tom Bergan <tombergan@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
To improve readability when exported fields are removed,
forbid the printer from emitting an empty line before the first comment
in a const, var, or type block.
Also, when printing the "Has filtered or unexported fields." message,
add an empty line before it to separate the message from the struct
or interfact contents.
Before the change:
<<<
type NamedArg struct {
// Name is the name of the parameter placeholder.
//
// If empty, the ordinal position in the argument list will be
// used.
//
// Name must omit any symbol prefix.
Name string
// Value is the value of the parameter.
// It may be assigned the same value types as the query
// arguments.
Value interface{}
// contains filtered or unexported fields
}
>>>
After the change:
<<<
type NamedArg struct {
// Name is the name of the parameter placeholder.
//
// If empty, the ordinal position in the argument list will be
// used.
//
// Name must omit any symbol prefix.
Name string
// Value is the value of the parameter.
// It may be assigned the same value types as the query
// arguments.
Value interface{}
// contains filtered or unexported fields
}
>>>
Fixes#18264
Change-Id: I9fe17ca39cf92fcdfea55064bd2eaa784ce48c88
Reviewed-on: https://go-review.googlesource.com/71990
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
* Avoid calculating insertk until needed.
* Avoid a pointer into b.tophash and just track the insertion index.
This avoids b.tophash being marked as escaping to heap.
* Calculate val only once at the end of the mapassign functions.
Function sizes decrease slightly, e.g. for mapassign_faststr:
before "".mapassign_faststr STEXT size=1166 args=0x28 locals=0x78
after "".mapassign_faststr STEXT size=1080 args=0x28 locals=0x68
name old time/op new time/op delta
MapAssign/Int32/256-4 19.4ns ± 4% 19.5ns ±11% ~ (p=0.973 n=20+20)
MapAssign/Int32/65536-4 32.5ns ± 2% 32.4ns ± 3% ~ (p=0.078 n=20+19)
MapAssign/Int64/256-4 20.3ns ± 6% 17.6ns ± 5% -13.01% (p=0.000 n=20+20)
MapAssign/Int64/65536-4 33.3ns ± 2% 33.3ns ± 1% ~ (p=0.444 n=20+20)
MapAssign/Str/256-4 22.3ns ± 3% 22.4ns ± 3% ~ (p=0.343 n=20+20)
MapAssign/Str/65536-4 44.9ns ± 1% 43.9ns ± 1% -2.39% (p=0.000 n=20+19)
Change-Id: I2627bb8a961d366d9473b5922fa129176319eb22
Reviewed-on: https://go-review.googlesource.com/74870
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
