Replace ioutil.Discard which is deprecated as of Go 1.16.
This was already done in CL 263142 but accidentially re-introduced in
CL 285914.
Change-Id: Ife0944d416294b1ba7c8f6b602aa68a3b9213c50
Reviewed-on: https://go-review.googlesource.com/c/go/+/299989
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Go Bot <gobot@golang.org>
Over a dozen of the ld tests were missing closes. That was less
obvious before CL 299670 started using T.TempDir instead, which fails
a test when the tempdir can't be cleaned up (as it can't on Windows
when things are still open), insteading of leaving tempdirs around on
disk after the test.
Most of the missing closes were fixed in CL 299670, but the builders
helpfully pointed out that I missed at least this one.
Change-Id: I35f695bb7cbfba31e16311c5af965c148f9d7943
Reviewed-on: https://go-review.googlesource.com/c/go/+/299929
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Trust: Dan Scales <danscales@google.com>
Trust: Alex Brainman <alex.brainman@gmail.com>
The ValAndOff type is a 64bit integer holding a 32bit value and a
32bit offset in each half, but for historical reasons its Val and Off
methods returned an int64. This was convenient when AuxInt was always
an int64, but now that AuxInts are typed we can return int32 from Val
and Off and get rid of a several casts and now unnecessary range
checks.
This change:
- changes the Val and Off methods to return an int32 (from int64);
- adds Val64 and Off64 methods for convenience in the few remaining
places (in the ssa.go files) where Val and Off are stored in int64
fields;
- deletes makeValAndOff64, renames makeValAndOff32 to makeValAndOff
- deletes a few ValAndOff methods that are now unused;
- removes several validOff/validValAndOff check that will always
return true.
Passes:
GOARCH=amd64 gotip build -toolexec 'toolstash -cmp' -a std
GOARCH=386 gotip build -toolexec 'toolstash -cmp' -a std
GOARCH=s390x gotip build -toolexec 'toolstash -cmp' -a std
(the three GOARCHs with SSA rules files impacted by the change).
Change-Id: I2abbbf42188c798631b94d3a55ca44256f140be7
Reviewed-on: https://go-review.googlesource.com/c/go/+/299149
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Document that network poller implementations need to define
netpollclose.
Change-Id: Idc73dea7cfd503d4de7e1d95902f0f102cf5ed8f
Reviewed-on: https://go-review.googlesource.com/c/go/+/297809
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Brings in the static analyzer "sigchanyzer", that we created at
Orijtech, Inc, and already submitted in CL 274352, as
golang.org/x/tools/go/analysis/passes/sigchanyzer
and add it to cmd/vet as one of the passes.
Fixes#9399
Change-Id: I83708b8ea5ca8ede5ee31efab55cbce7419434ab
Reviewed-on: https://go-review.googlesource.com/c/go/+/299532
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Bryan C. Mills <bcmills@google.com>
It's no longer necessary for non-Go signal handlers to use SA_RESTART.
For #20400Fixes#44761
Change-Id: Ie3c7fecc631a4a2822331754296ea09b308e1391
Reviewed-on: https://go-review.googlesource.com/c/go/+/298269
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The compiler currently has problem that some imported type is missing
size calculation. The problem is not triggered until CL 283313 merged,
due to the compiler can compile the functions immediately when it sees
them, so during SSA generation, size calculation is still ok.
CL 283313 makes the compiler always push functions to compile queue,
then drain from it for compiling function. During this process, the
types calculation size is disabled, so calculating size during SSA now
make the compiler crashes.
To fix this, we can just always calculate type size during typechecking,
when importing type from other packages.
Fixes#44732
Change-Id: I8d00ea0b5aadd432154908280e55d85c75f3ce92
Reviewed-on: https://go-review.googlesource.com/c/go/+/299689
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
These are left over from comments I failed to leave on CL 249463;
apparently I never hit "Reply".
Change-Id: Ia3f8a900703c347f8f98581ec1ac172c0f72cd9e
Reviewed-on: https://go-review.googlesource.com/c/go/+/299589
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Limits the number of bytes that can be consumed by Uvarint
to MaxVarintLen64 (10) to avoid wasted computations.
With this change, if Uvarint reads more than MaxVarintLen64
bytes, it'll return the erroring byte count of n=-(MaxVarintLen64+1)
which is -11, as per the function signature.
Updated some tests to reflect the new change in expectations of n
when the number of bytes to be read exceeds the limits..
Fixes#41185
Change-Id: Ie346457b1ddb0214b60c72e81128e24d604d083d
Reviewed-on: https://go-review.googlesource.com/c/go/+/299531
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
IsNonNil is readily implemented using SNEZ on riscv64, removing over 8,000
instructions from the go binary. Other rules will improve on this sequence,
however in this case it makes sense to use a direct simplification.
Change-Id: Ib4068599532398afcd05f51d160673ef5fb5e5a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/299230
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Michael Munday <mike.munday@lowrisc.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Instead of using two relocation types R_XXX and R_WEAKXXX, use a
separate bit, R_WEAK, to mark weak relocations. This makes it
easier to add more weak relocation types.
Change-Id: Iec4195c2aefa65f59e464c83018246e17cd08173
Reviewed-on: https://go-review.googlesource.com/c/go/+/268478
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
When writing code that reflects over a struct type, it's a common requirement to know the full set of struct fields, including fields available due to embedding of anonymous members while excluding fields that are erased because they're at the same level as another field with the same name.
The logic to do this is not that complex, but it's a little subtle and easy to get wrong.
This CL adds a new `VisibleFields` function to the reflect package that returns the full set of effective fields that apply in a given struct type.
Performance isn't a prime consideration, as it's common to cache results by type.
Fixes#42782
Change-Id: I7f1af76cecff9b8a2490f17eec058826e396f660
Reviewed-on: https://go-review.googlesource.com/c/go/+/281233
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Daniel Martí <mvdan@mvdan.cc>
Currently, relocation type is stored as uint8 in object files, as
Go relocations do not exceed 255. In the linker, however, it is
used as a 16-bit type, because external relocations can exceed
255. The linker has to store the extra byte in a side table. This
complicates many things.
Just store it as uint16 in object files. This simplifies things,
with a small cost of increasing the object file sizes.
before after
hello.o 1672 1678
runtime.a 7927784 8056194
Change-Id: I313cf44ad0b8b3b76e35055ae55d911ff35e3158
Reviewed-on: https://go-review.googlesource.com/c/go/+/268477
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Currently, the compiler synthesize a special ".fp" node, which
points to the FP of the current frame, be to used to call
gorecover. Later that node turns to an Arg in SSA that is not
really an arg, causing problems for the new ABI work which changes
the handling of Args, so we have to special-case that node.
This CL changes the compiler to get the FP by using getcallersp,
which is an intrinsic in SSA and works on all platforms. As we
need the FP, not the caller SP, one drawback is that we have to
add FixedFrameSize for LR machines. But it does allow us to remove
that special node.
Change-Id: Ie721d51efca8116c9d23cc4f79738fffcf847df8
Reviewed-on: https://go-review.googlesource.com/c/go/+/297930
Trust: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Currently, when instrumenting for the race detector, the compiler
inserts racefuncentry/racefuncentryfp at the entry of instrumented
functions. racefuncentry takes the caller's PC. On AMD64, we synthesize
a node which points to -8(FP) which is where the return address is
stored. Later this node turns to a special Arg in SSA that is not
really an argument. This causes problems in the new ABI work so that
special node has to be special-cased.
This CL changes the special node to a call to getcallerpc, which lowers
to an intrinsic in SSA. This also unifies AMD64 code path and LR machine
code path, as getcallerpc works on all platforms.
Change-Id: I1377e140b91e0473cfcadfda221f26870c1b124d
Reviewed-on: https://go-review.googlesource.com/c/go/+/297929
Trust: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
CL 280456 introduced a new store combining rule. On the LHS some
of the Aux and AuxInt of the stores are not specified, therefore
ignored during the matching. The rule is only correct if they
match. This CL adds explict match.
TODO: maybe we want the rule matcher require Aux/AuxInt to be
always specified on the LHS (using _ to explicitly ignore)? Or
maybe we want it to match the zero value if not specified? The
current approach is error-prone.
Fixes#44823.
Change-Id: Ic12b4a0de63117f2f070039737f0c905f28561bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/299289
Trust: Cherry Zhang <cherryyz@google.com>
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Correctly accessing allgs is a bit hairy. Some paths need to lock
allglock, some don't. Those that don't are safest using atomicAllG, but
usage is not consistent.
Rather than doing this ad-hoc, move all access* through forEachG /
forEachGRace, the locking and atomic versions, respectively. This will
make it easier to ensure safe access.
* markroot is the only exception, as it has a far-removed guarantee of
safe access via an atomic load of allglen far before actual use.
Change-Id: Ie1c7a8243e155ae2b4bc3143577380c695680e89
Reviewed-on: https://go-review.googlesource.com/c/go/+/279994
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Previously, if you attempted to fetch a private repository, or your
Git/curl client failed for an unknown reason, codehost would return an
UnknownRevisionError, which reported that a given revision in go.mod
was "unknown". This is confusing to many users who can go look in
their browser for example and see that the commit-ish exists.
Instead check whether "git ls-remote" exited with an error, and if so,
return that instead of the UnknownRevision message.
Fixes#42751.
Change-Id: I0dbded878b2818280e61126a4493767d719ad577
Reviewed-on: https://go-review.googlesource.com/c/go/+/297950
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Trust: Bryan C. Mills <bcmills@google.com>
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Invalid constant was already reported by noder, so don't re-check in
typecheck, which lead to compiler crashing.
Updates #43311
Change-Id: I48e2f540601cef725c1ff628c066ed15d848e771
Reviewed-on: https://go-review.googlesource.com/c/go/+/298713
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Same as CL 294031, but for OTYPESW.
Updates #43311
Change-Id: I996f5938835baff1d830c17ed75652315106bdfd
Reviewed-on: https://go-review.googlesource.com/c/go/+/298712
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The invalid interface type will be reported already, so don't expand
that invalid one, which causes the compiler crashes.
Updates #43311
Change-Id: Ic335cfa74f0b9fcfd0929dc5fd31d9156a8f5f5c
Reviewed-on: https://go-review.googlesource.com/c/go/+/298710
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CheckReturn uses fn.Type() unconditionally, so for invalid function,
fn.Type() will be nil, causes the compiler crashes.
Updates #43311
Change-Id: I4420dd296c72ea83986b38fbf2c7f51fa59757c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/298709
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now that allglock is no longer taken in throw, paniclk can move to the
bottom of the lock order where it belongs.
There is no fundamental reason that we really need to skip checks on
paniclk in lockWithRank (despite the recursive throws that could be
caused by lock rank checking, startpanic_m would still allow the crash
to complete). However, the partial order of lockRankPanic should be
every single lock that may be held before a throw, nil dereference,
out-of-bounds access, which our partial order doesn't cover.
Updates #42669
Change-Id: Ic3efaea873dc2dd9fd5b0d6ccdd5319730b29a22
Reviewed-on: https://go-review.googlesource.com/c/go/+/270862
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
This change modifies the reflect ABI assignment algorithm to catch
zero-sized types at the top level of each argument and faux-stack-assign
them. It doesn't actually generate an ABI step, which is unnecessary,
but it ensures that the offsets of further stack-assigned arguments are
aligned to the alignment of that zero-sized argument.
This change is necessary to have the register ABI assignment algorithm
gracefully degrade to ABI0 when no registers are present in the ABI.
Fixes#44377.
Change-Id: Ia95571688a61259302bb3c6d5fb33fbb6b5e8db8
Reviewed-on: https://go-review.googlesource.com/c/go/+/293789
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Trust: Than McIntosh <thanm@google.com>
This change switches reflect to use global variables for ABI-related
register counts instead of internal/abi constants. The advantage of
doing so is that we can make the internal/abi constants non-zero and
enable the runtime register argument spiller/unspiller even if they're
not used. It's basically turning two things we need to flip when we
switch to the register ABI into one.
It also paves the way for testing the reflect register ABI path
independently, because now we can switch the global variables at will
and run the register-assignment algorithm in tests without having the
rest of the runtime be broken.
Change-Id: Ie23629a37a5c80aeb24909d4bd9eacbd3f0c06d9
Reviewed-on: https://go-review.googlesource.com/c/go/+/293149
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Previously, if an extracted module directory existed in the module
cache, but the corresponding ziphash file did not, if the sum was
missing from go.sum, we would not verify the sum. This caused 'go get'
not to write missing sums. 'go build' in readonly mode (now the
default) checks for missing sums and doesn't attempt to fetch modules
that can't be verified against go.sum.
With this change, when requesting the module directory with
modfetch.DownloadDir, if the ziphash file is missing, the go command
will re-hash the zip without downloading or re-extracting it again.
Note that the go command creates the ziphash file before the module
directory, but another program could remove it separately, and it
might not be present after a crash.
Fixes#44749
Change-Id: I64551e048a3ba17d069de1ec123d5b8b2757543c
Reviewed-on: https://go-review.googlesource.com/c/go/+/298352
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Add a new method TB.Setenv that'll set environment variables
only for the isolated lifetime of the test, and will clean up
and unset these variables when the test ends.
This method disables the test or benchmark from running in
parallel.
Fixes#41260
Change-Id: I0a18f094ec1c6ec3157b4b12993ea3075e2e9867
GitHub-Last-Rev: 0ca12fa565
GitHub-Pull-Request: golang/go#41857
Reviewed-on: https://go-review.googlesource.com/c/go/+/260577
Trust: Daniel Martí <mvdan@mvdan.cc>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: roger peppe <rogpeppe@gmail.com>
Change-Id: I919d9c3968c0fcd33774e714f22182504790bd01
Reviewed-on: https://go-review.googlesource.com/c/go/+/284143
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Trust: Daniel Martí <mvdan@mvdan.cc>
Most subprocess invocations in the go command use base.AppendPWD to
append an accurate value of PWD to the command's environment, which can
speed up calls like os.Getwd and also help to provide less-confusing
output from scripts. Update `go generate` to do so.
Fixes#43862
Change-Id: I3b756f1532b2d922f7d74fd86414d5567a0122c0
GitHub-Last-Rev: 3ec8da265a
GitHub-Pull-Request: golang/go#43940
Reviewed-on: https://go-review.googlesource.com/c/go/+/287152
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Baokun Lee <bk@golangcn.org>
This test was missed in CL 298650, and not caught by TryBots because
it is skipped it short mode (and we forgot to add longtest TryBots on
that CL).
Updates #44745
Change-Id: I696d01307dabf351b0e4735db0644f4e09c8e369
Reviewed-on: https://go-review.googlesource.com/c/go/+/298794
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Map serialization using reflect.Value.MapIndex cannot retrieve
map keys that contain a NaN, resulting in a panic.
Switch the implementation to use the reflect.Value.MapRange method
instead, which iterates over all map entries regardless of whether
they are directly retrievable.
Note that according to RFC 8259, section 4, a JSON object should
have unique names, but does not forbid the occurrence of duplicate names.
Fixes#43207
Change-Id: If4bc55229b1f64b8ca4b0fed37549725efdace39
Reviewed-on: https://go-review.googlesource.com/c/go/+/278632
Trust: Meng Zhuo <mzh@golangcn.org>
Trust: Joe Tsai <thebrokentoaster@gmail.com>
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Meng Zhuo <mzh@golangcn.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Previously, we would sometimes see an internal (*instance) type for a
receiver of a types2 method, which was a bug. To deal with that, we put
in an extra (*Selection).TArgs() method. However, that (*instance) type
is no longer showing up for receivers, so we can remove the types2
method we added and do the work with existing types2 API methods.
Change-Id: I03e68f5bbaaf82fe706b6efecbb02e951bbd3cd4
Reviewed-on: https://go-review.googlesource.com/c/go/+/298869
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
includes three tests
Change-Id: I33ac0cfe35085d4b6ad2775abcaa3d7d6527b49f
Reviewed-on: https://go-review.googlesource.com/c/go/+/297031
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
this caused a problem in write barrier code when a spurious
zero-offset prevented a write barrier elision.
removed cache after instrumenting it and discovering
zero safe hits (one value must dominate the other, else
unsafe).
Change-Id: I42dfdb4d38ebfe158b13e766a7fabfc514d773f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/297349
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
