Fixes#25143
Change-Id: Ide654fe70651fda827cdeeaaa73d2a1f8aefd7e7
Reviewed-on: https://go-review.googlesource.com/110159
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The iOS exec wrapper uses ios-deploy to set up a device, install
the wrapped app, and start a lldb session to run it. ios-deploy is
not built to be scripted, as can be seen from the brittle way it is
driven by the Go wrapper. There are many timeouts and comments such
as
"
// lldb tries to be clever with terminals.
// So we wrap it in script(1) and be clever
// right back at it.
"
This CL replaces the use of ios-deploy with a lldb driver script in
Python. lldb is designed to be scripted, so apart from getting rid
of the ios-deploy dependency, we gain:
- No timouts and scripting ios-deploy through stdin and parsing
stdout for responses.
- Accurate exit codes.
- Prompt exits when the wrapped binary fails for some reason. Before,
the go test timeout would kick in to fail the test.
- Support for environment variables.
- No noise in the test output. Only the test binary output is output
from the wrapper.
We have to do more work with the lldb driver: mounting the developer
image on the device, running idevicedebugserverproxy and installing
the app. Even so, the CL removes almost as many lines as it adds.
Furthermore, having the steps split up helps to tell setup errors
from runtime errors.
Change-Id: I48cccc32f475d17987283b2c93aacc3da18fe339
Reviewed-on: https://go-review.googlesource.com/107337
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Return a non-zero exit code if the WebAssembly host fails to compile
the WebAssmbly bytecode to machine code.
Change-Id: I774309db2872b6a2de77a1b0392608058414160d
Reviewed-on: https://go-review.googlesource.com/110097
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The test has been flaky, probably due to EAGAIN, but let's find out
for sure.
Updates #25078
Change-Id: I5a5b14bfc52cb43f25f07ca7d207b61ae9d4f944
Reviewed-on: https://go-review.googlesource.com/109359
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
If X depends on Y and X was installed but Y is only present in the cache
(as happens when you "go install X") then we should report X as up-to-date,
not as stale.
This applies whether X is a package or a main binary.
Fixes#24558.
Fixes#23818.
Change-Id: I26a0b375b1f7f7ac909cc0db68e92f4e04529208
Reviewed-on: https://go-review.googlesource.com/107957
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
We were using absolute paths in the #line directives in the export
header file. This makes the header file change if you move GOPATH.
The absolute paths aren't helpful for the final user, which is some C
program elsewhere.
Fixes#24945
Change-Id: I2da32c9b477df578bd5087435a03fe97abe462e3
Reviewed-on: https://go-review.googlesource.com/108315
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We were using file descriptor 100, which requires the Linux kernel to
grow the fdtable size. That step may sometimes require a long time,
causing the test to fail. Switch to file descriptor 30, which should
not require growing the fdtable.
Fixes#23784
Change-Id: I3ac40d6f8569c70d34b470cfca34eff149bf8229
Reviewed-on: https://go-review.googlesource.com/108537
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
First, take the exclusive lock that ensures only one running binary
later: after assembling the gotest.app directory and signing it.
Second, don't pass -r to ios-deploy. The -r flag uninstalls the
app before installing it. It seems unnecessary, takes extra time
and if there was only the one developer app on the phone, it
will drop the developer permission on uninstall.
Change-Id: Ia222d3e5c2e1e2285f53074eb952941fd45fadd9
Reviewed-on: https://go-review.googlesource.com/106676
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
CL 106096 changed the iOS exec wrapper to directly run the binary
without waiting for a SIGINT signal, but did so in a way that
expects a "(lldb)" response from lldb in 2 seconds. Lldb might
not out output anything until the program finishes, so change the
exec wrapper to just fire and forget the the run command and go
straight to waiting for exit, successfully or otherwise.
Change-Id: I6a2dc63f9b29fe44edb3591afb048b9a8e2e0822
Reviewed-on: https://go-review.googlesource.com/106176
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
To enable the exec wrapper go_darwin_arm_exec.go to run binaries
on iOS devices, the GOIOS_DEV_ID variable needs to be set to a code
signing identity. The program detect.go attempts to detect suitable
values for GOIOS_DEV_ID (along with GOIOS_APP_ID and GOIOS_TEAM_ID).
Before this change, detect.go would use "security find-identity
-p codesigning -v" to list all available identities for code signing
and pick the first one with "iPhone Developer" in its name. However,
that pick might be invalid since if it was replaced by an identity
issued later.
For example, on the mobile builder:
$ security find-identity -p codesigning -v
1) 0E251DE41FE4490574E475AC320B47F58D6D3635 "lldb_codesign"
2) 0358588D07AA6A19478981BA405F40A97F95F187 "iPhone Developer: xxx@xxx (2754T98W8E)"
3) FC6D96F24A3223C98BF7A2C2C5194D82E04CD23E "iPhone Developer: xxx@xxx (2754T98W8E)"
3 valid identities found
In this case, the identity 0358588D07AA6A19478981BA405F40A97F95F187
is picked by detect.go even though it has been invalidated by
FC6D96F24A3223C98BF7A2C2C5194D82E04CD23E.
Instead of attempting to find an identity from the "security
find-identity" list, use the identity from the CommonName in the
embedded certificate in the provisioning file. The CommonName only
lists the identity name (iPhone Developer: xxx@xxx (2754T98W8E)),
not the fingerprint (FC6D96F24A3223C98BF7A2C2C5194D82E04CD23E), but
fortunately the codesign tool accepts both.
Identity names may not be unique, as demonstrated by the example,
but that will result in an ambiguity error at codesigning instead of
a more obscure error about an invalid identity when
go_darwin_arm_exec.go runs a binary.
The fix is then to delete the invalid identity from the system
keychain.
While here, find all connected devices instead of the first connected
and only consider provision files that covers them all. This matters
for the mobile builder where two devices are connected.
Change-Id: I6beb59ace3fc5e071ba76222a20a607765943989
Reviewed-on: https://go-review.googlesource.com/105436
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Once upon a time, the iOS exec wrapper needed to change the current
working directory for the binary being tested. To allow that, the
runtime raised a SIGINT signal that the wrapper caught, changed the
working directory and resumed the process.
These days, the current working directory is passed from the wrapper
to the runtime through a special entry in the app metadata and the
SIGINT handshake is not necessary anymore.
Remove the signaling from the runtime and the exec harness.
Change-Id: Ia53bcc9e4724d2ca00207e22b91ce80a05271b55
Reviewed-on: https://go-review.googlesource.com/106096
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
This commit adds scripts for running the WebAssembly binaries that the
Go compiler will produce.
The script go_js_wasm_exec uses Node.js to run the binaries. Adding it
to PATH will enable "go run" and "go test" to work for js/wasm
without having to manually provide the -exec flag.
See https://golang.org/cmd/go/#hdr-Compile_and_run_Go_program
for more information.
The web page wasm_exec.html is an example on how to run the same
binaries in a web browser.
Both scripts use wasm_exec.js as a shared library.
Updates #18892
Change-Id: Ia4d9bea025957750baa0d0651243dc88f156f85d
Reviewed-on: https://go-review.googlesource.com/103255
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#14327
Much of the code is based on the linux/amd64 code that implements these
build modes, and code is shared where possible.
Change-Id: Ia510f2023768c0edbc863aebc585929ec593b332
Reviewed-on: https://go-review.googlesource.com/93875
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When there are plugins, there may not be a unique copy of runtime
functions like goexit, mcall, etc. So identifying them by entry
address is problematic. Instead, keep track of each special function
using a field in the symbol table. That way, multiple copies of
the same runtime function will be treated identically.
Fixes#24351Fixes#23133
Change-Id: Iea3232df8a6af68509769d9ca618f530cc0f84fd
Reviewed-on: https://go-review.googlesource.com/100739
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
bytes.IndexByte is heavily optimized. Use it in findnull.
This is second attempt, similar to CL97523.
In this version we never call IndexByte on region of memory,
that crosses page boundary. A bit slower than CL97523,
but still fast:
name old time/op new time/op delta
GoString-6 164ns ± 2% 118ns ± 0% -28.00% (p=0.000 n=10+6)
findnull is also used in gostringnocopy,
which is used in many hot spots in the runtime.
Fixes#23830
Change-Id: Id843dd4f65a34309d92bdd8df229e484d26b0cb2
Reviewed-on: https://go-review.googlesource.com/98015
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This reverts commit 7365fac2db.
Reason for revert: breaks the build on some architectures, reading unmapped pages?
Change-Id: I3a8c02dc0b649269faacea79ecd8213defa97c54
Reviewed-on: https://go-review.googlesource.com/97995
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
bytes.IndexByte is heavily optimized.
Use it in findnull.
name old time/op new time/op delta
GoString-8 65.5ns ± 1% 40.2ns ± 1% -38.62% (p=0.000 n=19+19)
findnull is also used in gostringnocopy,
which is used in many hot spots in the runtime.
Fixes#23830
Change-Id: I2e6cb279c7d8078f8844065de684cc3567fe89d7
Reviewed-on: https://go-review.googlesource.com/97523
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Increase the sleep and wait for up to 2 seconds for the dup2.
Apparently it can sometimes take a long time.
Fixes#23784
Change-Id: I929530b057bbcd842b28a7640c39dd68d719ff7d
Reviewed-on: https://go-review.googlesource.com/93895
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
iana.org, www.iana.org and data.iana.org all present a valid TLS
certificate, so let's use it when fetching data or linking to
resources to avoid errors in transit.
Change-Id: Ib3ce7c19789c4e9d982a776b61d8380ddc63194d
Reviewed-on: https://go-review.googlesource.com/89416
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This replaces frame size -4/-8 with the NOFRAME flag in mips and
mips64 assembly.
This was automated with:
sed -i -e 's/\(^TEXT.*[A-Z]\),\( *\)\$-[84]/\1|NOFRAME,\2$0/' $(find -name '*_mips*.s')
Plus a manual fix to mkduff.go.
The go binary is identical on both architectures before and after this
change.
Change-Id: I0310384d1a584118c41d1cd3a042bb8ea7227efb
Reviewed-on: https://go-review.googlesource.com/92044
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This replaces frame size -8 with the NOFRAME flag in arm64 assembly.
This was automated with:
sed -i -e 's/\(^TEXT.*[A-Z]\),\( *\)\$-8/\1|NOFRAME,\2$0/' $(find -name '*_arm64.s')
Plus a manual fix to mkduff.go.
The go binary is identical before and after this change.
Change-Id: I0310384d1a584118c41d1cd3a042bb8ea7227efa
Reviewed-on: https://go-review.googlesource.com/92043
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This replaces frame size -4 with the NOFRAME flag in arm assembly.
This was automated with:
sed -i -e 's/\(^TEXT.*[A-Z]\),\( *\)\$-4/\1|NOFRAME,\2$0/' $(find -name '*_arm.s')
Plus three manual comment changes found by:
grep '\$-4' $(find -name '*_arm.s')
The go binary is identical before and after this change.
Change-Id: I0310384d1a584118c41d1cd3a042bb8ea7227ef9
Reviewed-on: https://go-review.googlesource.com/92042
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Both gcc and clang accept an option -fplugin=code.so to load
a plugin from the ELF shared object file code.so.
Obviously that plugin can then do anything it wants
during the build. This is contrary to the goal of "go get"
never running untrusted code during the build.
(What happens if you choose to run the result of
the build is your responsibility.)
Disallow this behavior by only allowing a small set of
known command-line flags in #cgo CFLAGS directives
(and #cgo LDFLAGS, etc).
The new restrictions can be adjusted by the environment
variables CGO_CFLAGS_ALLOW, CGO_CFLAGS_DISALLOW,
and so on. See the documentation.
In addition to excluding cgo-defined flags, we also have to
make sure that when we pass file names on the command
line, they don't look like flags. So we now refuse to build
packages containing suspicious file names like -x.go.
A wrinkle in all this is that GNU binutils uniformly accept
@foo on the command line to mean "if the file foo exists,
then substitute its contents for @foo in the command line".
So we must also reject @x.go, flags and flag arguments
beginning with @, and so on.
Fixes#23672, CVE-2018-6574.
Change-Id: I59e7c1355155c335a5c5ae0d2cf8fa7aa313940a
Reviewed-on: https://team-review.git.corp.google.com/209949
Reviewed-by: Ian Lance Taylor <iant@google.com>
CL 49490 fixed a warning when compiling the C code generated by cgo,
but it introduced typedef conflicts in Go code that cgo is supposed to
avoid.
Original CL description:
cmd/cgo: fix for function taking pointer typedef
Fixes#19832
Updates #19832Fixes#23720
Change-Id: I22a732db31be0b4f7248c105277ab8ee44ef6cfb
Reviewed-on: https://go-review.googlesource.com/92455
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The dlopen function returns an opaque handle, and it is possible for
it to look like a Go pointer, causing garbage collector and cgo
confusion.
Fixes#23663
Change-Id: Id080e2bbcee8cfa7ac4a457a927f96949eb913f8
Reviewed-on: https://go-review.googlesource.com/91596
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Introduce GOANDROID_ADB_FLAGS for additional flags to adb invocations.
With GOANDROID_ADG_FLAGS, the Android builders can distinguish between
emulator and device builds.
Change-Id: I11729926a523ee27f6a3795cb2cfb64a9454f0a5
Reviewed-on: https://go-review.googlesource.com/88795
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
The cgo checker was issuing an error with cgocheck=2 when a timer
bucket was stored in a pollDesc. The pollDesc values are allocated
using persistentalloc, so they are not in the Go heap. The code is OK
since timer bucket pointers point into a global array, and as such are
never garbage collected or moved.
Mark timersBucket notinheap to avoid the problem. timersBucket values
only occur in the global timers array.
Fixes#23435
Change-Id: I835f31caafd54cdacc692db5989de63bb49e7697
Reviewed-on: https://go-review.googlesource.com/87637
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
After CL 69831, addTransitiveLinkDeps ensures that all dependencies of
a link appear in Deps. We no longer need to traverse through all
actions to find them. And the old scheme of looking through all the
actions and assuming we would see shared library actions before
libraries they depend on no longer works.
Now that we have complete deps, change to a simpler scheme in which we
find the shared libraries in the deps, and then use that to sort the
deps into archives and shared libraries.
Fixes#22224
Change-Id: I14fcc773ac59b6f5c2965cc04d4ed962442cc89e
Reviewed-on: https://go-review.googlesource.com/87497
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The jobject type is declared as a pointer, but some JVMs
(Dalvik, ART) store non-pointer values in them. In Go, we must
use uintptr instead of a real pointer for these types.
This is similar to the CoreFoundation types on Darwin which
were "fixed" in CL 66332.
Update #22906
Update #21897
RELNOTE=yes
Change-Id: I0d4c664501d89a696c2fb037c995503caabf8911
Reviewed-on: https://go-review.googlesource.com/81876
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixed by CL 76025 yesterday, without realizing it:
the testshared and testplugin builds of separate iface_i
packages were colliding incorrectly in the cache.
Including the build directory fixes that.
Fixes#22571.
Change-Id: Id8193781c67c3150823dc1f48eae781dfe3702fb
Reviewed-on: https://go-review.googlesource.com/76371
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The iOS test harness dumps the output of its lldb session to stdout,
but only if the lldb session was successfully started.
Make sure the log is always dumpede, so that lldb startup failures
such as
lldb setup error: exited (lldb start: exit status 253)
can be diagnosed.
For the iOS builders.
Change-Id: Ie0e3341dd8f84a88d26509c34816668d3ebbfaa0
Reviewed-on: https://go-review.googlesource.com/76195
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
This reverts commit 08f19bbde1.
Reason for revert:
The changed transformation takes effect on a larger set
of code snippets than expected.
For example, this:
func foo() {
// Comment
bar()
}
becomes:
func foo() {
// Comment
bar()
}
This is an unintended consequence.
Change-Id: Ifca88d6267dab8a8170791f7205124712bf8ace8
Reviewed-on: https://go-review.googlesource.com/81335
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Joe Tsai <joetsai@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some C types are declared as pointers, but C code
stores non-pointers in them. When the Go garbage
collector sees such a pointer, it gets unhappy.
Instead, for these types represent them on the Go
side with uintptr.
We need this change to handle Apple's CoreFoundation
CF*Ref types. Users of these types might need to
update their code like we do in root_cgo_darwin.go.
The only change that is required under normal
circumstances is converting some nils to 0.
A go fix module is provided to help.
Fixes#21897
RELNOTE=yes
Change-Id: I9716cfb255dc918792625f42952aa171cd31ec1b
Reviewed-on: https://go-review.googlesource.com/66332
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
(The tests only run when swig is already installed on the local system.)
Change-Id: I172d106a68cfc746a1058f5a4bcf6761bab88912
Reviewed-on: https://go-review.googlesource.com/78175
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Permit the C preamble to use the _GoString_ type. Permit Go code to
pass string values directly to those C types. Add accessors for C
code to retrieve sizes and pointers.
Fixes#6907
Change-Id: I190c88319ec88a3ef0ddb99f342a843ba69fcaa3
Reviewed-on: https://go-review.googlesource.com/70890
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Also, with this change, error locations don't print absolute positions
in [] brackets following positions relative to line directives. To get
the absolute positions as well, specify the -L flag.
Fixes#22660.
Change-Id: I9ecfa254f053defba9c802222874155fa12fee2c
Reviewed-on: https://go-review.googlesource.com/77090
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The go repository contains a mix of github.com/golang/go/issues/xxxxx
and golang.org/issues/xxxxx URLs for references to issues in the issue
tracker. We should use one for consistency, and golang.org is preferred
in case the project moves the issue tracker in the future.
This reasoning is taken from a comment Sam Whited left on a CL I
recently opened: https://go-review.googlesource.com/c/go/+/73890.
In that CL I referenced an issue using its github.com URL, because other
tests in the file I was changing contained references to issues using
their github.com URL. Sam Whited left a comment on the CL stating I
should change it to the golang.org URL.
If new code is intended to reference issues via golang.org and not
github.com, existing code should be updated so that precedence exists
for contributors who are looking at the existing code as a guide for the
code they should write.
Change-Id: I3b9053fe38a1c56fc101a8b7fd7b8f310ba29724
Reviewed-on: https://go-review.googlesource.com/75673
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL makes "go install" behave the way many users expect:
install only the things named on the command line.
Future builds still run as fast, thanks to the new build cache (CL 75473).
To install dependencies as well (the old behavior), use "go install -i".
Actual definitions aside, what most users know and expect of "go install"
is that (1) it installs what you asked, and (2) it's fast, unlike "go build".
It was fast because it installed dependencies, but installing dependencies
confused users repeatedly (see for example #5065, #6424, #10998, #12329,
"go build" and "go test" so that they could be "fast" too, but that only
created new opportunities for confusion. We also had to add -installsuffix
and then -pkgdir, to allow "fast" even when dependencies could not be
installed in the usual place.
The recent introduction of precise content-based staleness logic means that
the go command detects the need for rebuilding packages more often than it
used to, with the consequence that "go install" rebuilds and reinstalls
dependencies more than it used to. This will create more new opportunities
for confusion and will certainly lead to more issues filed like the ones
listed above.
CL 75743 introduced a build cache, separate from the install locations.
That cache makes all operations equally incremental and fast, whether or
not the operation is "install" or "build", and whether or not "-i" is used.
Installing dependencies is no longer necessary for speed, it has confused
users in the past, and the more accurate rebuilds mean that it will confuse
users even more often in the future. This CL aims to end all that confusion
by not installing dependencies by default.
By analogy with "go build -i" and "go test -i", which still install
dependencies, this CL introduces "go install -i", which installs
dependencies in addition to the things named on the command line.
Fixes#5065.
Fixes#6424.
Fixes#10998.
Fixes#12329.
Fixes#18981.
Fixes#22469.
Another step toward #4719.
Change-Id: I3d7bc145c3a680e2f26416e182fa0dcf1e2a15e5
Reviewed-on: https://go-review.googlesource.com/75850
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This CL adds an automatic, limited "go vet" to "go test".
If the building of a test package fails, vet is not run.
If vet fails, the test is not run.
The goal is that users don't notice vet as part of the "go test"
process at all, until vet speaks up and says something important.
This should help users find real problems in their code faster
(vet can just point to them instead of needing to debug a
test failure) and expands the scope of what kinds of things
vet can help with.
The "go vet" runs in parallel with the linking of the test binary,
so for incremental builds it typically does not slow the overall
"go test" at all: there's spare machine capacity during the link.
all.bash has less spare machine capacity. This CL increases
the time for all.bash on my laptop from 4m41s to 4m48s (+2.5%)
To opt out for a given run, use "go test -vet=off".
The vet checks used during "go test" are a subset of the full set,
restricted to ones that are 100% correct and therefore acceptable
to make mandatory. In this CL, that set is atomic, bool, buildtags,
nilfunc, and printf. Including printf is debatable, but I want to
include it for now and find out what needs to be scaled back.
(It already found one real problem in package os's tests that
previous go vet os had not turned up.)
Now that we can rely on type information it may be that printf
should make its function-name-based heuristic less aggressive
and have a whitelist of known print/printf functions.
Determining the exact set for Go 1.10 is #18085.
Running vet also means that programs now have to type-check
with both cmd/compile and go/types in order to pass "go test".
We don't start vet until cmd/compile has built the test package,
so normally the added go/types check doesn't find anything.
However, there is at least one instance where go/types is more
precise than cmd/compile: declared and not used errors involving
variables captured into closures.
This CL includes a printf fix to os/os_test.go and many declared
and not used fixes in the race detector tests.
Fixes#18084.
Change-Id: I353e00b9d1f9fec540c7557db5653e7501f5e1c9
Reviewed-on: https://go-review.googlesource.com/74356
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This CL adds caching of successful test results, keyed by the
action ID of the test binary and its command line arguments.
Suppose you run:
go test -short std
<edit a typo in a comment in math/big/float.go>
go test -short std
Before this CL, the second go test would re-run all the tests
for the std packages. Now, the second go test will use the cached
result immediately (without any compile or link steps) for any
packages that do not transitively import math/big, and then
it will, after compiling math/big and seeing that the .a file didn't
change, reuse the cached test results for the remaining packages
without any additional compile or link steps.
Suppose that instead of editing a typo you made a substantive
change to one function, but you left the others (including their
line numbers) unchanged. Then the second go test will re-link
any of the tests that transitively depend on math/big, but it still
will not re-run the tests, because the link will result in the same
test binary as the first run.
The only cacheable test arguments are:
-cpu
-list
-parallel
-run
-short
-v
Using any other test flag disables the cache for that run.
The suggested argument to mean "turn off the cache" is -count=1
(asking "please run this 1 time, not 0").
There's an open question about re-running tests when inputs
like environment variables and input files change. For now we
will assume that users will bypass the test cache when they
need to do so, using -count=1 or "go test" with no arguments.
This CL documents the new cache but also documents the
previously-undocumented distinction between "go test" with
no arguments (now called "local directory mode") and with
arguments (now called "package list mode"). It also cleans up
a minor detail of package list mode buffering that used to change
whether test binary stderr was sent to go command stderr based
on details like exactly how many packages were listed or
how many CPUs the host system had. Clearly the file descriptor
receiving output should not depend on those, so package list mode
now consistently merges all output to stdout, where before it
mostly did that but not always.
Fixes#11193.
Change-Id: I120edef347b9ddd5b10e247bfd5bd768db9c2182
Reviewed-on: https://go-review.googlesource.com/75631
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
To improve readability when exported fields are removed,
forbid the printer from emitting an empty line before the first comment
in a const, var, or type block.
Also, when printing the "Has filtered or unexported fields." message,
add an empty line before it to separate the message from the struct
or interfact contents.
Before the change:
<<<
type NamedArg struct {
// Name is the name of the parameter placeholder.
//
// If empty, the ordinal position in the argument list will be
// used.
//
// Name must omit any symbol prefix.
Name string
// Value is the value of the parameter.
// It may be assigned the same value types as the query
// arguments.
Value interface{}
// contains filtered or unexported fields
}
>>>
After the change:
<<<
type NamedArg struct {
// Name is the name of the parameter placeholder.
//
// If empty, the ordinal position in the argument list will be
// used.
//
// Name must omit any symbol prefix.
Name string
// Value is the value of the parameter.
// It may be assigned the same value types as the query
// arguments.
Value interface{}
// contains filtered or unexported fields
}
>>>
Fixes#18264
Change-Id: I9fe17ca39cf92fcdfea55064bd2eaa784ce48c88
Reviewed-on: https://go-review.googlesource.com/71990
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This cuts 6 seconds off all.bash with the new go command.
Not a ton, but also an easy 6 seconds to grab.
The -tags=use_go_run in the misc/cgo tests is just some
go command flag that will make run.go use go run,
but without making everything look stale.
(Those tests have relative imports,
so go tool compile+link is not enough.)
Change-Id: I43bf4bb661d3adde2b2d4aad5e8f64b97bc69ba9
Reviewed-on: https://go-review.googlesource.com/73994
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL changes the go command to base all its rebuilding decisions
on the content of the files being processed and not their file system
modification times. It also eliminates the special handling of release
toolchains, which were previously considered always up-to-date
because modification time order could not be trusted when unpacking
a pre-built release.
The go command previously tracked "build IDs" as a backup to
modification times, to catch changes not reflected in modification times.
For example, if you remove one .go file in a package with multiple .go
files, there is no modification time remaining in the system that indicates
that the installed package is out of date. The old build ID was the hash
of a list of file names and a few other factors, expected to change if
those factors changed.
This CL moves to using this kind of build ID as the only way to
detect staleness, making sure that the build ID hash includes all
possible factors that need to influence the rebuild decision.
One such factor is the compiler flags. As of this CL, if you run
go build -gcflags -N cmd/gofmt
you will get a gofmt where every package is built with -N,
regardless of what may or may not be installed already.
Another such factor is the linker flags. As of this CL, if you run
go install myprog
go install -ldflags=-s myprog
the second go install will now correctly build a new myprog with
the updated linker flags. (Previously the installed myprog appeared
up-to-date, because the ldflags were not included in the build ID.)
Because we have more precise information we can also validate whether
the target of a "go test -c" operation is already the right binary and
therefore can avoid a rebuild.
This CL sets us up for having a more general build artifact cache,
maybe even a step toward not having a pkg directory with .a files,
but this CL does not take that step. For now the result of go install
is the same as it ever was; we just do a better job of what needs to
be installed.
This CL does slow down builds a small amount by reading all the
dependent source files in full. (The go command already read the
beginning of every dependent source file to discover build tags
and imports.) On my MacBook Pro, before this CL all.bash takes
3m58s, while after this CL and a few optimizations stacked above it
all.bash takes 4m28s. Given that CL 73850 cut 1m43s off the all.bash
time earlier today, we can afford adding 30s back for now.
More optimizations are planned that should make the go command
more efficient than it was even before this CL.
Fixes#15799.
Fixes#18369.
Fixes#19340.
Fixes#21477.
Change-Id: I10d7ca0e31ca3f58aabb9b1f11e2e3d9d18f0bc9
Reviewed-on: https://go-review.googlesource.com/73212
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The upcoming CL 73212 will see through mtime modifications.
Change the underlying file too.
Change-Id: Ib23b4136a62ee87bce408b76bb0385451ae7dcd2
Reviewed-on: https://go-review.googlesource.com/74130
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
