1
0
mirror of https://github.com/golang/go synced 2024-11-17 22:44:41 -07:00
go/misc/cgo/test/callback.go

182 lines
3.7 KiB
Go
Raw Normal View History

// Copyright 2011 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
package cgotest
/*
void callback(void *f);
void callGoFoo(void);
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
*/
import "C"
import (
"./backdoor"
"path"
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
"runtime"
"strings"
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
"testing"
"unsafe"
)
// nestedCall calls into C, back into Go, and finally to f.
func nestedCall(f func()) {
// NOTE: Depends on representation of f.
// callback(x) calls goCallback(x)
C.callback(*(*unsafe.Pointer)(unsafe.Pointer(&f)))
}
//export goCallback
func goCallback(p unsafe.Pointer) {
(*(*func())(unsafe.Pointer(&p)))()
}
func testCallback(t *testing.T) {
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
var x = false
nestedCall(func() { x = true })
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
if !x {
t.Fatal("nestedCall did not call func")
}
}
func testCallbackGC(t *testing.T) {
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
nestedCall(runtime.GC)
}
var lockedOSThread = backdoor.LockedOSThread
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
func testCallbackPanic(t *testing.T) {
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
// Make sure panic during callback unwinds properly.
if lockedOSThread() {
t.Fatal("locked OS thread on entry to TestCallbackPanic")
}
defer func() {
s := recover()
if s == nil {
t.Fatal("did not panic")
}
if s.(string) != "callback panic" {
t.Fatal("wrong panic:", s)
}
if lockedOSThread() {
t.Fatal("locked OS thread on exit from TestCallbackPanic")
}
}()
nestedCall(func() { panic("callback panic") })
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
panic("nestedCall returned")
}
func testCallbackPanicLoop(t *testing.T) {
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
// Make sure we don't blow out m->g0 stack.
for i := 0; i < 100000; i++ {
testCallbackPanic(t)
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
}
}
func testCallbackPanicLocked(t *testing.T) {
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
runtime.LockOSThread()
defer runtime.UnlockOSThread()
if !lockedOSThread() {
t.Fatal("runtime.LockOSThread didn't")
}
defer func() {
s := recover()
if s == nil {
t.Fatal("did not panic")
}
if s.(string) != "callback panic" {
t.Fatal("wrong panic:", s)
}
if !lockedOSThread() {
t.Fatal("lost lock on OS thread after panic")
}
}()
nestedCall(func() { panic("callback panic") })
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
panic("nestedCall returned")
}
// Callback with zero arguments used to make the stack misaligned,
// which broke the garbage collector and other things.
func testZeroArgCallback(t *testing.T) {
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
defer func() {
s := recover()
if s != nil {
t.Fatal("panic during callback:", s)
}
}()
C.callGoFoo()
}
//export goFoo
func goFoo() {
x := 1
for i := 0; i < 10000; i++ {
// variadic call mallocs + writes to
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
variadic(x, x, x)
if x != 1 {
panic("bad x")
}
}
}
func variadic(x ...interface{}) {}
func testBlocking(t *testing.T) {
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
c := make(chan int)
go func() {
for i := 0; i < 10; i++ {
c <- <-c
}
}()
nestedCall(func() {
runtime: scheduler, cgo reorganization * Change use of m->g0 stack (aka scheduler stack). * Provide runtime.mcall(f) to invoke f() on m->g0 stack. * Replace scheduler loop entry with runtime.mcall(schedule). Runtime.mcall eliminates the need for fake scheduler states that exist just to run a bit of code on the m->g0 stack (Grecovery, Gstackalloc). The elimination of the scheduler as a loop that stops and starts using gosave and gogo fixes a bad interaction with the way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled) C functions on that stack, and then when calling back into Go, it sets m->g0->sched.sp below the added call frames, so that other uses of m->g0's stack will not interfere with those frames. Unfortunately, gogo (longjmp) back to the scheduler loop at this point would end up running scheduler with the lower sp, which no longer points at a valid stack frame for a call to scheduler. If scheduler then wrote any function call arguments or local variables to where it expected the stack frame to be, it would overwrite other data on the stack. I realized this possibility while debugging a problem with calling complex Go code in a Go -> C -> Go cgo callback. This wasn't the bug I was looking for, it turns out, but I believe it is a real bug nonetheless. Switching to runtime.mcall, which only adds new frames to the stack and never jumps into functions running in existing ones, fixes this bug. * Move cgo-related code out of proc.c into cgocall.c. * Add very large comment describing cgo call sequences. * Simpilify, regularize cgo function implementations and names. * Add test suite as misc/cgo/test. Now the Go -> C path calls cgocall, which calls asmcgocall, and the C -> Go path calls cgocallback, which calls cgocallbackg. The shuffling, which affects mainly the callback case, moves most of the callback implementation to cgocallback running on the m->curg stack (not the m->g0 scheduler stack) and only while accounted for with $GOMAXPROCS (between calls to exitsyscall and entersyscall). The previous callback code did not block in startcgocallback's approximation to exitsyscall, so if, say, the garbage collector were running, it would still barge in and start doing things like call malloc. Similarly endcgocallback's approximation of entersyscall did not call matchmg to kick off new OS threads when necessary, which caused the bug in issue 1560. Fixes #1560. R=iant CC=golang-dev https://golang.org/cl/4253054
2011-03-07 08:37:42 -07:00
for i := 0; i < 10; i++ {
c <- i
if j := <-c; j != i {
t.Errorf("out of sync %d != %d", j, i)
}
}
})
}
// Test that the stack can be unwound through a call out and call back
// into Go.
func testCallbackCallers(t *testing.T) {
pc := make([]uintptr, 100)
n := 0
name := []string{
"test.goCallback",
"runtime.cgocallbackg",
"runtime.cgocallback_gofunc",
"return",
"runtime.cgocall",
"test._Cfunc_callback",
"test.nestedCall",
"test.testCallbackCallers",
"test.TestCallbackCallers",
"testing.tRunner",
"runtime.goexit",
}
nestedCall(func() {
n = runtime.Callers(2, pc)
})
if n != len(name) {
t.Errorf("expected %d frames, got %d", len(name), n)
}
for i := 0; i < n; i++ {
f := runtime.FuncForPC(pc[i])
if f == nil {
t.Fatalf("expected non-nil Func for pc %p", pc[i])
}
fname := f.Name()
// Remove the prepended pathname from automatically
// generated cgo function names.
if strings.HasPrefix(fname, "_") {
fname = path.Base(f.Name()[1:])
}
if fname != name[i] {
t.Errorf("expected function name %s, got %s", name[i], fname)
}
}
}