2020-08-12 08:34:15 -06:00
<!-- {
"Title": "Go 1.16 Release Notes",
"Path": "/doc/go1.16"
}-->
<!--
NOTE: In this document and others in this directory, the convention is to
set fixed-width phrases with non-fixed-width spaces, as in
< code > hello< / code > < code > world< / code > .
Do not send CLs removing the interior tags from such phrases.
-->
< style >
main ul li { margin: 0.5em 0; }
< / style >
< h2 id = "introduction" > DRAFT RELEASE NOTES — Introduction to Go 1.16< / h2 >
< p >
< strong >
Go 1.16 is not yet released. These are work-in-progress
release notes. Go 1.16 is expected to be released in February 2021.
< / strong >
< / p >
< h2 id = "language" > Changes to the language< / h2 >
< p >
2020-12-03 10:07:52 -07:00
There are no changes to the language.
2020-08-12 08:34:15 -06:00
< / p >
< h2 id = "ports" > Ports< / h2 >
2020-12-03 10:12:23 -07:00
< h3 id = "darwin" > Darwin and iOS< / h3 >
2020-11-04 10:40:35 -07:00
2020-11-24 11:23:10 -07:00
< p > <!-- golang.org/issue/38485, golang.org/issue/41385, CL 266373, more CLs -->
2020-11-04 10:40:35 -07:00
Go 1.16 adds support of 64-bit ARM architecture on macOS (also known as
Apple Silicon) with < code > GOOS=darwin< / code > , < code > GOARCH=arm64< / code > .
Like the < code > darwin/amd64< / code > port, the < code > darwin/arm64< / code >
port supports cgo, internal and external linking, < code > c-archive< / code > ,
< code > c-shared< / code > , and < code > pie< / code > build modes, and the race
detector.
< / p >
2020-11-24 11:23:10 -07:00
< p > <!-- CL 254740 -->
2020-12-03 10:12:23 -07:00
The iOS port, which was previously < code > darwin/arm64< / code > , has
been renamed to < code > ios/arm64< / code > . < code > GOOS=ios< / code >
implies the
2020-11-04 10:40:35 -07:00
< code > darwin< / code > build tag, just as < code > GOOS=android< / code >
2020-12-03 10:12:23 -07:00
implies the < code > linux< / code > build tag. This change should be
transparent to anyone using gomobile to build iOS apps.
2020-11-04 10:40:35 -07:00
< / p >
< p > <!-- golang.org/issue/42100, CL 263798 -->
2020-12-03 10:12:23 -07:00
Go 1.16 adds an < code > ios/amd64< / code > port, which targets the iOS
simulator running on AMD64-based macOS. Previously this was
unofficially supported through < code > darwin/amd64< / code > with
the < code > ios< / code > build tag set.
2020-11-04 10:40:35 -07:00
< / p >
2020-12-03 15:29:39 -07:00
< p > <!-- golang.org/issue/23011 -->
Go 1.16 is the last release that will run on macOS 10.12 Sierra.
Go 1.17 will require macOS 10.13 High Sierra or later.
< / p >
2020-10-02 14:13:14 -06:00
< h3 id = "netbsd" > NetBSD< / h3 >
< p > <!-- golang.org/issue/30824 -->
Go now supports the 64-bit ARM architecture on NetBSD (the
< code > netbsd/arm64< / code > port).
2020-08-12 08:34:15 -06:00
< / p >
2020-12-06 19:28:36 -07:00
< h3 id = "openbsd" > OpenBSD< / h3 >
< p > <!-- golang.org/issue/40995 -->
Go now supports the MIPS64 architecture on OpenBSD
(the < code > openbsd/mips64< / code > port). This port does not yet
support cgo.
< / p >
2020-10-07 11:42:49 -06:00
< h3 id = "386" > 386< / h3 >
< p > <!-- golang.org/issue/40255, golang.org/issue/41848, CL 258957, and CL 260017 -->
As < a href = "go1.15#386" > announced< / a > in the Go 1.15 release notes,
Go 1.16 drops support for x87 mode compilation (< code > GO386=387< / code > ).
Support for non-SSE2 processors is now available using soft float
mode (< code > GO386=softfloat< / code > ).
Users running on non-SSE2 processors should replace < code > GO386=387< / code >
with < code > GO386=softfloat< / code > .
< / p >
2020-12-03 03:27:05 -07:00
< h3 id = "riscv" > RISC-V< / h3 >
< p > <!-- golang.org/issue/36641, CL 267317 -->
The < code > linux/riscv64< / code > port now supports cgo and
< code > -buildmode=pie< / code > . This release also includes performance
optimizations and code generation improvements for RISC-V.
< / p >
2020-08-12 08:34:15 -06:00
< h2 id = "tools" > Tools< / h2 >
< p >
TODO
< / p >
< h3 id = "go-command" > Go command< / h3 >
2020-12-01 09:10:40 -07:00
< h4 id = "modules" > Modules< / h4 >
2020-11-24 11:23:10 -07:00
2020-12-01 09:10:40 -07:00
< p > <!-- golang.org/issue/41330 -->
Module-aware mode is enabled by default, regardless of whether a
< code > go.mod< / code > file is present in the current working directory or a
2020-12-03 08:31:42 -07:00
parent directory. More precisely, the < code > GO111MODULE< / code > environment
2020-12-01 09:10:40 -07:00
variable now defaults to < code > on< / code > . To switch to the previous behavior,
set < code > GO111MODULE< / code > to < code > auto< / code > .
2020-11-24 11:23:10 -07:00
< / p >
2020-11-10 09:32:04 -07:00
< p > <!-- golang.org/issue/40728 -->
Build commands like < code > go< / code > < code > build< / code > and < code > go< / code >
< code > test< / code > no longer modify < code > go.mod< / code > and < code > go.sum< / code >
by default. Instead, they report an error if a module requirement or checksum
needs to be added or updated (as if the < code > -mod=readonly< / code > flag were
used). Module requirements and sums may be adjusted with < code > go< / code >
< code > mod< / code > < code > tidy< / code > or < code > go< / code > < code > get< / code > .
< / p >
2020-09-02 11:14:36 -06:00
< p > <!-- golang.org/issue/40276 -->
< code > go< / code > < code > install< / code > now accepts arguments with
version suffixes (for example, < code > go< / code > < code > install< / code >
< code > example.com/cmd@v1.0.0< / code > ). This causes < code > go< / code >
< code > install< / code > to build and install packages in module-aware mode,
ignoring the < code > go.mod< / code > file in the current directory or any parent
directory, if there is one. This is useful for installing executables without
2020-12-01 09:10:40 -07:00
affecting the dependencies of the main module.
2020-09-02 11:14:36 -06:00
< / p >
2020-10-29 13:49:05 -06:00
< p > <!-- golang.org/issue/40276 -->
< code > go< / code > < code > install< / code > , with or without a version suffix (as
described above), is now the recommended way to build and install packages in
module mode. < code > go< / code > < code > get< / code > should be used with the
< code > -d< / code > flag to adjust the current module's dependencies without
building packages, and use of < code > go< / code > < code > get< / code > to build and
install packages is deprecated. In a future release, the < code > -d< / code > flag
will always be enabled.
< / p >
2020-04-15 13:11:51 -06:00
< p > <!-- golang.org/issue/24031 -->
< code > retract< / code > directives may now be used in a < code > go.mod< / code > file
to indicate that certain published versions of the module should not be used
by other modules. A module author may retract a version after a severe problem
is discovered or if the version was published unintentionally.< br >
< / p >
2020-09-18 08:23:58 -06:00
< p > <!-- golang.org/issue/26603 -->
The < code > go< / code > < code > mod< / code > < code > vendor< / code >
and < code > go< / code > < code > mod< / code > < code > tidy< / code > subcommands now accept
the < code > -e< / code > flag, which instructs them to proceed despite errors in
resolving missing packages.
< / p >
2020-12-01 09:10:40 -07:00
< p > <!-- golang.org/issue/36465 -->
The < code > go< / code > command now ignores requirements on module versions
excluded by < code > exclude< / code > directives in the main module. Previously,
the < code > go< / code > command used the next version higher than an excluded
version, but that version could change over time, resulting in
non-reproducible builds.
< / p >
2020-12-03 08:31:42 -07:00
< h4 id = "embed" > Embedding Files< / h4 >
< p >
The < code > go< / code > command now supports including
static files and file trees as part of the final executable,
using the new < code > //go:embed< / code > directive.
See the documentation for the new
< a href = "/pkg/embed/" > < code > embed< / code > < / a >
package for details.
< / p >
2020-09-21 19:50:37 -06:00
< h4 id = "go-test" > < code > go< / code > < code > test< / code > < / h4 >
2020-03-13 14:32:37 -06:00
< p > <!-- golang.org/issue/29062 -->
2020-09-21 19:50:37 -06:00
When using < code > go< / code > < code > test< / code > , a test that
2020-08-26 18:26:05 -06:00
calls < code > os.Exit(0)< / code > during execution of a test function
will now be considered to fail.
This will help catch cases in which a test calls code that calls
2020-09-21 19:50:37 -06:00
< code > os.Exit(0)< / code > and thereby stops running all future tests.
2020-08-26 18:26:05 -06:00
If a < code > TestMain< / code > function calls < code > os.Exit(0)< / code >
that is still considered to be a passing test.
< / p >
2020-12-01 09:10:40 -07:00
< p > <!-- golang.org/issue/39484 -->
< code > go< / code > < code > test< / code > reports an error when the < code > -c< / code >
or < code > -i< / code > flags are used together with unknown flags. Normally,
unknown flags are passed to tests, but when < code > -c< / code > or < code > -i< / code >
are used, tests are not run.
< / p >
< h4 id = "go-get" > < code > go< / code > < code > get< / code > < / h4 >
2020-09-22 12:02:52 -06:00
< p > <!-- golang.org/issue/37519 -->
The < code > go< / code > < code > get< / code > < code > -insecure< / code > flag is
2020-09-25 08:09:42 -06:00
deprecated and will be removed in a future version. This flag permits
fetching from repositories and resolving custom domains using insecure
2020-12-07 10:10:56 -07:00
schemes such as HTTP, and also bypasses module sum validation using the
2020-09-25 08:09:42 -06:00
checksum database. To permit the use of insecure schemes, use the
< code > GOINSECURE< / code > environment variable instead. To bypass module
sum validation, use < code > GOPRIVATE< / code > or < code > GONOSUMDB< / code > .
See < code > go< / code > < code > help< / code > < code > environment< / code > for details.
2020-09-22 12:02:52 -06:00
< / p >
cmd/go/internal/modget: resolve paths at the requested versions
Previously, we resolved each argument to 'go get' to a package path or
module path based on what was in the build list at existing versions,
even if the argument specified a different version explicitly. That
resulted in bugs like #37438, in which we variously resolved the wrong
version or guessed the wrong argument type for what is unambiguously a
package argument at the requested version.
We were also using a two-step upgrade/downgrade algorithm, which could
not only upgrade more that is strictly necessary, but could also
unintentionally upgrade *above* the requested versions during the
downgrade step.
This change instead uses an iterative approach, with an explicit
disambiguation step for the (rare) cases where an argument could match
the same package path in multiple modules. We use a hook in the
package loader to halt package loading as soon as an incorrect version
is found — preventing over-resolving — and verify that the result
after applying downgrades successfully obtained the requested versions
of all modules.
Making 'go get' be correct and usable is especially important now that
we are defaulting to read-only mode (#40728), for which we are
recommending 'go get' more heavily.
While I'm in here refactoring, I'm also reworking the API boundary
between the modget and modload packages. Previously, the modget
package edited the build list directly, and the modload package
accepted the edited build list without validation. For lazy loading
(#36460), the modload package will need to maintain additional
metadata about the requirement graph, so it needs tighter control over
the changes to the build list.
As of this change, modget no longer invokes MVS directly, but instead
goes through the modload package. The resulting API gives clearer
reasons in case of updates, which we can use to emit more useful
errors.
Fixes #37438
Updates #36460
Updates #40728
Change-Id: I596f0020f3795870dec258147e6fc26a3292c93a
Reviewed-on: https://go-review.googlesource.com/c/go/+/263267
Trust: Bryan C. Mills <bcmills@google.com>
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
2020-09-18 10:10:58 -06:00
< p > <!-- golang.org/cl/263267 -->
< code > go< / code > < code > get< / code > < code > example.com/mod@patch< / code > now
requires that some version of < code > example.com/mod< / code > already be
required by the main module.
(However, < code > go< / code > < code > get< / code > < code > -u=patch< / code > continues
to patch even newly-added dependencies.)
< / p >
2020-12-01 09:10:40 -07:00
< h4 id = "govcs" > < code > GOVCS< / code > environment variable< / h4 >
< p > <!-- golang.org/issue/266420 -->
< code > GOVCS< / code > is a new environment variable that limits which version
control tools the < code > go< / code > command may use to download source code.
This mitigates security issues with tools that are typically used in trusted,
authenticated environments. By default, < code > git< / code > and < code > hg< / code >
may be used to download code from any repository. < code > svn< / code > ,
< code > bzr< / code > , and < code > fossil< / code > may only be used to download code
from repositories with module paths or package paths matching patterns in
the < code > GOPRIVATE< / code > environment variable. See
< a href = "/cmd/go/#hdr-Controlling_version_control_with_GOVCS" > < code > go< / code >
< code > help< / code > < code > vcs< / code > < / a > for details.
< / p >
2020-03-13 14:32:37 -06:00
< h4 id = "all-pattern" > The < code > all< / code > pattern< / h4 >
< p > <!-- golang.org/cl/240623 -->
When the main module's < code > go.mod< / code > file
declares < code > go< / code > < code > 1.16< / code > or higher, the < code > all< / code >
package pattern now matches only those packages that are transitively imported
by a package or test found in the main module. (Packages imported by < em > tests
of< / em > packages imported by the main module are no longer included.) This is
the same set of packages retained
by < code > go< / code > < code > mod< / code > < code > vendor< / code > since Go 1.11.
< / p >
2020-10-17 13:03:19 -06:00
< h4 id = "toolexec" > The < code > -toolexec< / code > build flag< / h4 >
< p > <!-- golang.org/cl/263357 -->
When the < code > -toolexec< / code > build flag is specified to use a program when
invoking toolchain programs like compile or asm, the environment variable
< code > TOOLEXEC_IMPORTPATH< / code > is now set to the import path of the package
being built.
< / p >
2020-10-29 14:34:32 -06:00
< h4 id = "i-flag" > The < code > -i< / code > build flag< / h4 >
< p > <!-- golang.org/issue/41696 -->
The < code > -i< / code > flag accepted by < code > go< / code > < code > build< / code > ,
< code > go< / code > < code > install< / code > , and < code > go< / code > < code > test< / code > is
now deprecated. The < code > -i< / code > flag instructs the < code > go< / code > command
to install packages imported by packages named on the command line. Since
the build cache was introduced in Go 1.10, the < code > -i< / code > flag no longer
has a significant effect on build times, and it causes errors when the install
directory is not writable.
< / p >
2020-10-22 09:30:26 -06:00
< h4 id = "list-buildid" > The < code > list< / code > command< / h4 >
< p > <!-- golang.org/cl/263542 -->
When the < code > -export< / code > flag is specified, the < code > BuildID< / code >
field is now set to the build ID of the compiled package. This is equivalent
to running < code > go< / code > < code > tool< / code > < code > buildid< / code > on
< code > go< / code > < code > list< / code > < code > -exported< / code > < code > -f< / code > < code > {{.Export}< / code > ,
but without the extra step.
< / p >
2020-09-01 18:01:00 -06:00
< h3 id = "cgo" > Cgo< / h3 >
2020-11-25 12:07:30 -07:00
< p > <!-- CL 252378 -->
2020-09-01 18:01:00 -06:00
The < a href = "/cmd/cgo" > cgo< / a > tool will no longer try to translate
C struct bitfields into Go struct fields, even if their size can be
represented in Go. The order in which C bitfields appear in memory
is implementation dependent, so in some cases the cgo tool produced
results that were silently incorrect.
< / p >
2020-11-24 11:23:10 -07:00
< h3 id = "vet" > Vet< / h3 >
2020-08-12 08:34:15 -06:00
< p >
TODO
2020-11-24 11:23:10 -07:00
<!-- CL 235677: https://golang.org/cl/235677: cmd/vet: bring in pass to catch invalid uses of testing.T in goroutines -->
2020-08-12 08:34:15 -06:00
< / p >
2020-12-08 15:35:41 -07:00
< p > <!-- CL 248686, CL 276372 -->
The vet tool now warns about amd64 assembly that clobbers the BP
register (the frame pointer) without saving and restoring it,
contrary to the calling convention. Code that doesn't preserve the
BP register must be modified to either not use BP at all or preserve
BP by saving and restoring it. An easy way to preserve BP is to set
the frame size to a nonzero value, which causes the generated
prologue and epilogue to preserve the BP register for you.
See < a href = "https://golang.org/cl/248260" > CL 248260< / a > for example
fixes.
< / p >
2020-08-12 08:34:15 -06:00
< h2 id = "runtime" > Runtime< / h2 >
< p >
2020-12-03 08:31:42 -07:00
The new < a href = "/pkg/runtime/metrics/" > < code > runtime/metrics< / code > < / a > package
introduces a stable interface for reading
implementation-defined metrics from the Go runtime.
It supersedes existing functions like
< a href = "/pkg/runtime/#ReadMemStats" > < code > runtime.ReadMemStats< / code > < / a >
and
< a href = "/pkg/runtime/debug/#GCStats" > < code > debug.GCStats< / code > < / a >
and is significantly more general and efficient.
See the package documentation for more details.
2020-08-12 08:34:15 -06:00
< / p >
2020-12-03 11:53:41 -07:00
< p > <!-- CL 254659 -->
2020-12-03 17:09:13 -07:00
Setting the < code > GODEBUG< / code > environment variable
2020-12-03 11:53:41 -07:00
to < code > inittrace=1< / code > now causes the runtime to emit a single
line to standard error for each package < code > init< / code > ,
summarizing its execution time and memory allocation. This trace can
be used to find bottlenecks or regressions in Go startup
performance.
The < a href = "/pkg/runtime/#hdr-Environment_Variables" > < code > GODEBUG< / code > <
documentation< / a > describes the format.
< / p >
2020-11-02 09:43:50 -07:00
< p > <!-- CL 267100 -->
On Linux, the runtime now defaults to releasing memory to the
operating system promptly (using < code > MADV_DONTNEED< / code > ), rather
than lazily when the operating system is under memory pressure
(using < code > MADV_FREE< / code > ). This means process-level memory
statistics like RSS will more accurately reflect the amount of
physical memory being used by Go processes. Systems that are
currently using < code > GODEBUG=madvdontneed=1< / code > to improve
memory monitoring behavior no longer need to set this environment
variable.
< / p >
2020-12-03 11:53:41 -07:00
< p > <!-- CL 220419, CL 271987 -->
2020-12-06 19:20:15 -07:00
Go 1.16 fixes a discrepancy between the race detector and
the < a href = "/ref/mem" > Go memory model< / a > . The race detector now
more precisely follows the channel synchronization rules of the
memory model. As a result, the detector may now report races it
previously missed.
2020-12-03 11:53:41 -07:00
< / p >
2020-08-12 08:34:15 -06:00
< h2 id = "compiler" > Compiler< / h2 >
2020-12-03 11:53:41 -07:00
< p > <!-- CL 256459, CL 264837, CL 266203, CL 256460 -->
The compiler can now inline functions with
non-labeled < code > for< / code > loops, method values, and type
switches. The inliner can also detect more indirect calls where
inlining is possible.
2020-08-12 08:34:15 -06:00
< / p >
< h2 id = "linker" > Linker< / h2 >
2020-11-24 11:23:10 -07:00
< p > <!-- CL 248197 -->
2020-08-12 10:59:55 -06:00
This release includes additional improvements to the Go linker,
reducing linker resource usage (both time and memory) and improving
code robustness/maintainability. These changes form the second half
of a two-release project to
< a href = "https://golang.org/s/better-linker" > modernize the Go
linker< / a > .
< / p >
< p >
The linker changes in 1.16 extend the 1.15 improvements to all
supported architecture/OS combinations (the 1.15 performance improvements
were primarily focused on < code > ELF< / code > -based OSes and
< code > amd64< / code > architectures). For a representative set of
2020-12-07 15:15:06 -07:00
large Go programs, linking is 20-25% faster than 1.15 and requires
2020-08-12 10:59:55 -06:00
5-15% less memory on average for < code > linux/amd64< / code > , with larger
2020-12-07 15:15:06 -07:00
improvements for other architectures and OSes. Most binaries are
also smaller as a result of more aggressive symbol pruning.
2020-08-12 08:34:15 -06:00
< / p >
2020-11-25 12:07:30 -07:00
< p > <!-- CL 255259 -->
2020-10-21 08:04:07 -06:00
On Windows, < code > go build -buildmode=c-shared< / code > now generates Windows
ASLR DLLs by default. ASLR can be disabled with < code > --ldflags=-aslr=false< / code > .
< / p >
2020-10-07 11:42:49 -06:00
2020-08-12 08:34:15 -06:00
< h2 id = "library" > Core library< / h2 >
2020-12-03 08:31:42 -07:00
< h3 id = "library-embed" > Embedded Files< / h3 >
< p >
The new < a href = "/pkg/embed/" > < code > embed< / code > < / a > package
provides access to files embedded in the program during compilation
using the new < a href = "#embed" > < code > //go:embed< / code > directive< / a > .
< / p >
< h3 id = "fs" > File Systems< / h3 >
< p >
The new < a href = "/pkg/io/fs/" > < code > io/fs< / code > < / a > package
defines an abstraction for read-only trees of files,
the < a href = "/pkg/io/fs/#FS" > < code > fs.FS< / code > < / a > interface,
and the standard library packages have
been adapted to make use of the interface as appropriate.
< / p >
< p >
On the producer side of the interface,
the new < a href = "/pkg/embed/#FS" > embed.FS< / code > < / a > type
implements < code > fs.FS< / code > , as does
< a href = "/pkg/archive/zip/#Reader" > < code > zip.Reader< / code > < / a > .
2020-12-02 10:49:20 -07:00
The new < a href = "/pkg/os/#DirFS" > < code > os.DirFS< / code > < / a > function
2020-12-03 08:31:42 -07:00
provides an implementation of < code > fs.FS< / code > backed by a tree
of operating system files.
< / p >
< p >
On the consumer side,
the new < a href = "/pkg/net/http/#FS" > < code > http.FS< / code > < / a >
function converts an < code > fs.FS< / code > to an
< a href = "/pkg/net/http/#Handler" > < code > http.Handler< / code > < / a > .
Also, the < a href = "/pkg/html/template/" > < code > html/template< / code > < / a >
and < a href = "/pkg/text/template/" > < code > text/template< / code > < / a >
packages’ < a href = "/pkg/html/template/#ParseFS" > < code > ParseFS< / code > < / a >
functions and methods read templates from an < code > fs.FS< / code > .
< / p >
2020-08-12 08:34:15 -06:00
< p >
2020-12-03 08:31:42 -07:00
For testing code that implements < code > fs.FS< / code > ,
the new < a href = "/pkg/testing/fstest/" > < code > testing/fstest< / code > < / a >
package provides a < a href = "/pkg/testing/fstest/#TestFS" > < code > TestFS< / code > < / a >
function that checks for and reports common mistakes.
It also provides a simple in-memory file system implementation,
< a href = "/pkg/testing/fstest/#MapFS" > < code > MapFS< / code > < / a > ,
which can be useful for testing code that accepts < code > fs.FS< / code >
implementations.
2020-05-23 11:15:46 -06:00
< / p >
2020-08-12 08:34:15 -06:00
2020-11-25 12:07:30 -07:00
< p >
TODO: when the "Minor changes to the library" section is close to completion,
decide if any changes are worth factoring out and highlighting in "Core library"
2020-08-17 11:10:12 -06:00
< / p >
2020-08-12 08:34:15 -06:00
< h3 id = "minor_library_changes" > Minor changes to the library< / h3 >
< p >
As always, there are various minor changes and updates to the library,
made with the Go 1 < a href = "/doc/go1compat" > promise of compatibility< / a >
in mind.
< / p >
< p >
2020-11-25 12:07:30 -07:00
TODO: complete this section, resolve TODOs below, add missing entries
2020-08-12 08:34:15 -06:00
< / p >
2020-05-12 18:39:11 -06:00
2020-09-28 11:29:57 -06:00
< dl id = "crypto/dsa" > < dt > < a href = "/pkg/crypto/dsa/" > crypto/dsa< / a > < / dt >
< dd >
< p > <!-- CL 257939 -->
The < a href = "/pkg/crypto/dsa/" > < code > crypto/dsa< / code > < / a > package is now deprecated.
See < a href = "https://golang.org/issue/40337" > issue #40337< / a > .
< / p >
< / dd >
< / dl > <!-- crypto/dsa -->
2020-11-25 12:07:30 -07:00
< dl id = "crypto/hmac" > < dt > < a href = "/pkg/crypto/hmac/" > crypto/hmac< / a > < / dt >
< dd >
< p > <!-- CL 261960 -->
2020-12-03 17:46:59 -07:00
< a href = "/pkg/crypto/hmac/#New" > < code > New< / code > < / a > will now panic if
separate calls to the hash generation function fail to return new values.
Previously, the behavior was undefined and invalid outputs were sometimes
generated.
2020-11-25 12:07:30 -07:00
< / p >
< / dd >
< / dl > <!-- crypto/hmac -->
2020-11-24 11:23:10 -07:00
< dl id = "crypto/tls" > < dt > < a href = "/pkg/crypto/tls/" > crypto/tls< / a > < / dt >
< dd >
2020-11-25 12:07:30 -07:00
< p > <!-- CL 256897 -->
2020-12-03 17:46:59 -07:00
I/O operations on closing or closed TLS connections can now be detected
using the new < a href = "/pkg/net/#ErrClosed" > < code > net.ErrClosed< / code > < / a >
error. A typical use would be < code > errors.Is(err, net.ErrClosed)< / code > .
2020-11-25 12:07:30 -07:00
< / p >
< p > <!-- CL 266037 -->
2020-12-03 17:46:59 -07:00
A default write deadline is now set in
< a href = "/pkg/crypto/tls/#Conn.Close" > < code > Conn.Close< / code > < / a >
before sending the "close notify" alert, in order to prevent blocking
2020-11-25 12:07:30 -07:00
indefinitely.
< / p >
< p > <!-- CL 246338 -->
2020-12-03 17:46:59 -07:00
The new < a href = "/pkg/crypto/tls#Conn.HandshakeContext" > < code > Conn.HandshakeContext< / code > < / a >
method allows cancellation of an in-progress handshake. The provided
context is accessible through the new
< a href = "/pkg/crypto/tls#ClientHelloInfo.Context" > < code > ClientHelloInfo.Context< / code > < / a >
and < a href = "/pkg/crypto/tls#CertificateRequestInfo.Context" >
< code > CertificateRequestInfo.Context< / code > < / a > methods. Canceling the
context after the handshake has finished has no effect.
2020-11-25 12:07:30 -07:00
< / p >
< p > <!-- CL 239748 -->
2020-12-03 17:46:59 -07:00
Clients now return a handshake error if the server selects
2020-11-25 12:07:30 -07:00
< a href = "/pkg/crypto/tls/#ConnectionState.NegotiatedProtocol" >
2020-12-03 17:46:59 -07:00
an ALPN protocol< / a > that was not in
2020-11-25 12:07:30 -07:00
< a href = "/pkg/crypto/tls/#Config.NextProtos" >
the list advertised by the client< / a > .
< / p >
< p > <!-- CL 262857 -->
2020-12-03 17:46:59 -07:00
Servers will now prefer other available AEAD cipher suites (such as ChaCha20Poly1305)
2020-11-25 12:07:30 -07:00
over AES-GCM cipher suites if either the client or server doesn't have AES hardware
2020-12-03 17:46:59 -07:00
support, unless both < a href = "/pkg/crypto/tls/#Config.PreferServerCipherSuites" >
< code > Config.PreferServerCipherSuites< / code > < / a >
2020-11-25 12:07:30 -07:00
and < a href = "/pkg/crypto/tls/#Config.CipherSuites" > < code > Config.CipherSuites< / code > < / a >
2020-12-03 17:46:59 -07:00
are set. The client is assumed not to have AES hardware support if it does
not signal a preference for AES-GCM cipher suites.
2020-11-25 12:07:30 -07:00
< / p >
2020-11-24 11:23:10 -07:00
< p > <!-- CL 246637 -->
2020-12-03 17:46:59 -07:00
< a href = "/pkg/crypto/tls/#Config.Clone" > < code > Config.Clone< / code > < / a > now
returns nil if the receiver is nil, rather than panicking.
2020-11-24 11:23:10 -07:00
< / p >
< / dd >
< / dl > <!-- crypto/tls -->
2020-09-28 11:29:57 -06:00
< dl id = "crypto/x509" > < dt > < a href = "/pkg/crypto/x509/" > crypto/x509< / a > < / dt >
< dd >
2020-10-29 17:04:00 -06:00
< p >
The < code > GODEBUG=x509ignoreCN=0< / code > flag will be removed in Go 1.17.
It enables the legacy behavior of treating the < code > CommonName< / code >
field on X.509 certificates as a host name when no Subject Alternative
Names are present.
< / p >
2020-11-25 12:07:30 -07:00
< p > <!-- CL 235078 -->
2020-12-03 17:46:59 -07:00
< a href = "/pkg/crypto/x509/#ParseCertificate" > < code > ParseCertificate< / code > < / a > and
< a href = "/pkg/crypto/x509/#CreateCertificate" > < code > CreateCertificate< / code > < / a >
now enforce string encoding restrictions for the < code > DNSNames< / code > ,
< code > EmailAddresses< / code > , and < code > URIs< / code > fields. These fields
can only contain strings with characters within the ASCII range.
2020-11-25 12:07:30 -07:00
< / p >
< p > <!-- CL 259697 -->
2020-12-03 17:46:59 -07:00
< a href = "/pkg/crypto/x509/#CreateCertificate" > < code > CreateCertificate< / code > < / a >
now verifies the generated certificate's signature using the signer's
public key. If the signature is invalid, an error is returned, instead of
a malformed certificate.
2020-11-25 12:07:30 -07:00
< / p >
< p > <!-- CL 233163 -->
A number of additional fields have been added to the
2020-12-03 17:46:59 -07:00
< a href = "/pkg/crypto/x509/#CertificateRequest" > < code > CertificateRequest< / code > < / a > type.
These fields are now parsed in < a href = "/pkg/crypto/x509/#ParseCertificateRequest" >
< code > ParseCertificateRequest< / code > < / a > and marshalled in
< a href = "/pkg/crypto/x509/#CreateCertificateRequest" > < code > CreateCertificateRequest< / code > < / a > .
2020-11-25 12:07:30 -07:00
< / p >
2020-09-28 11:29:57 -06:00
< p > <!-- CL 257939 -->
DSA signature verification is no longer supported. Note that DSA signature
generation was never supported.
See < a href = "https://golang.org/issue/40337" > issue #40337< / a > .
< / p >
2020-11-24 11:23:10 -07:00
< p > <!-- CL 257257 -->
2020-11-30 17:32:41 -07:00
On Windows, < a href = "/pkg/crypto/x509/#Certificate.Verify" > < code > Certificate.Verify< / code > < / a >
will now return all certificate chains that are built by the platform
certificate verifier, instead of just the highest ranked chain.
2020-11-24 11:23:10 -07:00
< / p >
< p > <!-- CL 262343 -->
2020-12-03 17:46:59 -07:00
The new < a href = "/pkg/crypto/x509/#SystemRootsError.Unwrap" > < code > SystemRootsError.Unwrap< / code > < / a >
method allows accessing the < a href = "/pkg/crypto/x509/#SystemRootsError.Err" > < code > Err< / code > < / a >
field through the < a href = "/pkg/errors" > < code > errors< / code > < / a > package functions.
2020-11-24 11:23:10 -07:00
< / p >
2020-09-28 11:29:57 -06:00
< / dd >
< / dl > <!-- crypto/x509 -->
2020-11-29 01:18:12 -07:00
< dl id = "encoding/asn1" > < dt > < a href = "/pkg/encoding/asn1" > encoding/asn1< / a > < / dt >
< dd >
< p > <!-- CL 255881 -->
2020-12-03 17:46:59 -07:00
< a href = "/pkg/encoding/asn1/#Unmarshal" > < code > Unmarshal< / code > < / a > and
< a href = "/pkg/encoding/asn1/#UnmarshalWithParams" > < code > UnmarshalWithParams< / code > < / a >
now return an error instead of panicking when the argument is not
2020-11-29 01:18:12 -07:00
a pointer or is nil. This change matches the behavior of other
2020-12-03 17:46:59 -07:00
encoding packages such as < a href = "/pkg/encoding/json" > < code > encoding/json< / code > < / a > .
2020-11-29 01:18:12 -07:00
< / p >
< / dd >
< / dl >
2020-11-24 11:23:10 -07:00
< dl id = "encoding/json" > < dt > < a href = "/pkg/encoding/json/" > encoding/json< / a > < / dt >
< dd >
< p > <!-- CL 234818 -->
2020-12-01 15:59:23 -07:00
The < code > json< / code > struct field tags understood by
< a href = "/pkg/encoding/json/#Marshal" > < code > Marshal< / code > < / a > ,
< a href = "/pkg/encoding/json/#Unmarshal" > < code > Unmarshal< / code > < / a > ,
and related functionality now permit semicolon characters within
a JSON object name for a Go struct field.
2020-11-24 11:23:10 -07:00
< / p >
< / dd >
< / dl > <!-- encoding/json -->
2020-10-20 16:19:36 -06:00
< dl id = "encoding/xml" > < dt > < a href = "/pkg/encoding/xml/" > encoding/xml< / a > < / dt >
< dd >
< p > <!-- CL 264024 -->
The encoder has always taken care to avoid using namespace prefixes
beginning with < code > xml< / code > , which are reserved by the XML
specification.
Now, following the specification more closely, that check is
case-insensitive, so that prefixes beginning
with < code > XML< / code > , < code > XmL< / code > , and so on are also
avoided.
< / p >
< / dd >
< / dl > <!-- encoding/xml -->
2020-11-24 11:23:10 -07:00
< dl id = "flag" > < dt > < a href = "/pkg/flag/" > flag< / a > < / dt >
< dd >
< p > <!-- CL 240014 -->
2020-12-03 08:03:22 -07:00
The new < a href = "/pkg/flag/#Func" > < code > Func< / code > < / a > function
allows registering a flag implemented by calling a function,
as a lighter-weight alternative to implementing the
< a href = "/pkg/flag/#Value" > < code > Value< / code > < / a > interface.
2020-11-24 11:23:10 -07:00
< / p >
< / dd >
< / dl > <!-- flag -->
< dl id = "io" > < dt > < a href = "/pkg/io/" > io< / a > < / dt >
< dd >
< p > <!-- CL 261577 -->
2020-12-03 08:03:22 -07:00
The package now defines a
< a href = "/pkg/io/#ReadSeekCloser" > < code > ReadSeekCloser< / code > < / a > interface.
2020-11-24 11:23:10 -07:00
< / p >
< / dd >
< / dl > <!-- io -->
< dl id = "log" > < dt > < a href = "/pkg/log/" > log< / a > < / dt >
< dd >
< p > <!-- CL 264460 -->
2020-12-03 08:03:22 -07:00
The new < a href = "/pkg/log/#Default" > < code > Default< / code > < / a > function
provides access to the default < a href = "/pkg/log/#Logger" > < code > Logger< / code > < / a > .
2020-11-24 11:23:10 -07:00
< / p >
< / dd >
< / dl > <!-- log -->
< dl id = "log/syslog" > < dt > < a href = "/pkg/log/syslog/" > log/syslog< / a > < / dt >
< dd >
< p > <!-- CL 264297 -->
2020-12-03 08:03:22 -07:00
The < a href = "/pkg/log/syslog/#Writer" > < code > Writer< / code > < / a >
now uses the local message format
(omitting the host name and using a shorter time stamp)
when logging to custom Unix domain sockets,
matching the format already used for the default log socket.
2020-11-24 11:23:10 -07:00
< / p >
< / dd >
< / dl > <!-- log/syslog -->
< dl id = "mime/multipart" > < dt > < a href = "/pkg/mime/multipart/" > mime/multipart< / a > < / dt >
< dd >
< p > <!-- CL 247477 -->
2020-12-03 08:03:22 -07:00
The < a href = "/pkg/mime/multipart/#Reader" > < code > Reader< / code > < / a > 's
< a href = "/pkg/mime/multipart/#Reader.ReadForm" > < code > ReadForm< / code > < / a >
method no longer rejects form data
when passed the maximum int64 value as a limit.
2020-11-24 11:23:10 -07:00
< / p >
< / dd >
< / dl > <!-- mime/multipart -->
< dl id = "net" > < dt > < a href = "/pkg/net/" > net< / a > < / dt >
< dd >
2020-11-25 12:07:30 -07:00
< p > <!-- CL 250357 -->
The case of I/O on a closed network connection, or I/O on a network
connection that is closed before any of the I/O completes, can now
be detected using the new < a href = "/pkg/net/#ErrClosed" > ErrClosed< / a > error.
A typical use would be < code > errors.Is(err, net.ErrClosed)< / code > .
In earlier releases the only way to reliably detect this case was to
match the string returned by the < code > Error< / code > method
with < code > "use of closed network connection"< / code > .
< / p >
< p > <!-- CL 255898 -->
In previous Go releases the default TCP listener backlog size on Linux systems,
set by < code > /proc/sys/net/core/somaxconn< / code > , was limited to a maximum of < code > 65535< / code > .
On Linux kernel version 4.1 and above, the maximum is now < code > 4294967295< / code > .
< / p >
2020-11-24 11:23:10 -07:00
< p > <!-- CL 238629 -->
2020-12-03 08:03:22 -07:00
On Linux, host name lookups no longer use DNS before checking
< code > /etc/hosts< / code > when < code > /etc/nsswitch.conf< / code >
is missing; this is common on musl-based systems and makes
Go programs match the behavior of C programs on those systems.
2020-11-24 11:23:10 -07:00
< / p >
< / dd >
< / dl > <!-- net -->
2020-08-26 14:55:09 -06:00
< dl id = "net/http" > < dt > < a href = "/pkg/net/http/" > net/http< / a > < / dt >
< dd >
< p > <!-- CL 233637 -->
In the < a href = "/pkg/net/http/" > < code > net/http< / code > < / a > package, the
behavior of < a href = "/pkg/net/http/#StripPrefix" > < code > StripPrefix< / code > < / a >
has been changed to strip the prefix from the request URL's
< code > RawPath< / code > field in addition to its < code > Path< / code > field.
In past releases, only the < code > Path< / code > field was trimmed, and so if the
request URL contained any escaped characters the URL would be modified to
have mismatched < code > Path< / code > and < code > RawPath< / code > fields.
In Go 1.16, < code > StripPrefix< / code > trims both fields.
If there are escaped characters in the prefix part of the request URL the
handler serves a 404 instead of its previous behavior of invoking the
underlying handler with a mismatched < code > Path< / code > /< code > RawPath< / code > pair.
< / p >
< p > <!-- CL 252497 -->
2020-11-25 12:07:30 -07:00
The < a href = "/pkg/net/http/" > < code > net/http< / code > < / a > package now rejects HTTP range requests
of the form < code > "Range": "bytes=--N"< / code > where < code > "-N"< / code > is a negative suffix length, for
example < code > "Range": "bytes=--2"< / code > . It now replies with a < code > 416 "Range Not Satisfiable"< / code > response.
2020-08-26 14:55:09 -06:00
< / p >
2020-09-22 09:57:06 -06:00
< p > <!-- CL 256498, golang.org/issue/36990 -->
2020-12-03 17:46:59 -07:00
Cookies set with < a href = "/pkg/net/http/#SameSiteDefaultMode" > < code > SameSiteDefaultMode< / code > < / a >
now behave according to the current spec (no attribute is set) instead of
generating a SameSite key without a value.
2020-09-22 09:57:06 -06:00
< / p >
2020-08-01 05:18:31 -06:00
< p > <!-- CL 246338 -->
2020-12-03 17:46:59 -07:00
The < a href = "/pkg/net/http/" > < code > net/http< / code > < / a > package now passes the
< a href = "/pkg/net/http/#Request.Context" > < code > Request< / code > context< / a > to
< a href = "/pkg/crypto/tls#Conn.HandshakeContext" > < code > tls.Conn.HandshakeContext< / code > < / a >
when performing TLS handshakes.
2020-08-01 05:18:31 -06:00
< / p >
2020-11-24 11:23:10 -07:00
< p > <!-- CL 250039 -->
2020-12-03 08:03:22 -07:00
The < a href = "/pkg/net/http/#Client" > Client< / a > now sends
an explicit < code > Content-Length:< / code > < code > 0< / code >
header in < code > PATCH< / code > requests with empty bodies,
matching the existing behavior of < code > POST< / code > and < code > PUT< / code > .
2020-11-24 11:23:10 -07:00
< / p >
< p > <!-- CL 249440 -->
2020-12-03 08:03:22 -07:00
The < a href = "/pkg/net/http/#ProxyFromEnvironment" > ProxyFromEnvironment< / a > function
no longer returns the setting of the < code > HTTP_PROXY< / code > environment
variable for < code > https://< / code > URLs when < code > HTTPS_PROXY< / code > is unset.
2020-11-24 11:23:10 -07:00
< / p >
2020-08-26 14:55:09 -06:00
< / dd >
< / dl > <!-- net/http -->
2020-10-07 11:42:49 -06:00
2020-11-24 11:23:10 -07:00
< dl id = "net/http/httputil" > < dt > < a href = "/pkg/net/http/httputil/" > net/http/httputil< / a > < / dt >
< dd >
< p > <!-- CL 260637 -->
2020-12-03 08:03:22 -07:00
The < a href = "/pkg/net/http/httputil/#ReverseProxy" > ReverseProxy< / a >
now flushes buffered data more aggressively when proxying
streamed responses with unknown body lengths.
2020-11-24 11:23:10 -07:00
< / p >
< / dd >
< / dl > <!-- net/http/httputil -->
< dl id = "net/smtp" > < dt > < a href = "/pkg/net/smtp/" > net/smtp< / a > < / dt >
< dd >
< p > <!-- CL 247257 -->
2020-12-03 08:03:22 -07:00
The < a href = "/pkg/net/smtp/#Client" > Client< / a > 's
< a href = "/pkg/net/smtp/#Client.Mail" > < code > Mail< / code > < / a >
method now sends the < code > SMTPUTF8< / code > directive to
servers that support it, signaling that addresses are encoded in UTF-8.
2020-11-24 11:23:10 -07:00
< / p >
< / dd >
< / dl > <!-- net/smtp -->
< dl id = "os" > < dt > < a href = "/pkg/os/" > os< / a > < / dt >
< dd >
< p > <!-- CL 242998 -->
2020-12-03 03:07:27 -07:00
< a href = "/pkg/os/#Process.Signal" > < code > Process.Signal< / code > < / a > now
returns < a href = "/pkg/os/#ErrProcessDone" > < code > ErrProcessDone< / code > < / a >
instead of the unexported < code > errFinished< / code > when the process has
already finished.
2020-11-24 11:23:10 -07:00
< / p >
< / dd >
< / dl > <!-- os -->
< dl id = "os/signal" > < dt > < a href = "/pkg/os/signal/" > os/signal< / a > < / dt >
< dd >
< p > <!-- CL 219640 -->
2020-12-03 08:03:22 -07:00
The new
< a href = "/pkg/os/signal/#NotifyContext" > < code > NotifyContext< / code > < / a >
function allows creating contexts that are canceled upon arrival of
specific signals.
2020-11-24 11:23:10 -07:00
< / p >
< / dd >
< / dl > <!-- os/signal -->
< dl id = "path" > < dt > < a href = "/pkg/path/" > path< / a > < / dt >
< dd >
2020-12-01 06:19:57 -07:00
< p > <!-- CL 264397, golang.org/issues/28614 -->
The < code > Match< / code > and < code > Glob< / code > functions now
return an error if the unmatched part of the pattern has a
syntax error. Previously, the functions returned early on a failed
match, and thus did not report any later syntax error in the
pattern.
2020-11-24 11:23:10 -07:00
< / p >
< / dd >
< / dl > <!-- path -->
< dl id = "path/filepath" > < dt > < a href = "/pkg/path/filepath/" > path/filepath< / a > < / dt >
< dd >
2020-12-01 06:19:57 -07:00
< p > <!-- CL 264397, golang.org/issues/28614 -->
The < code > Match< / code > and < code > Glob< / code > functions now
return an error if the unmatched part of the pattern has a
syntax error. Previously, the functions returned early on a failed
match, and thus did not report any later syntax error in the
pattern.
2020-11-24 11:23:10 -07:00
< / p >
< / dd >
< / dl > <!-- path/filepath -->
< dl id = "reflect" > < dt > < a href = "/pkg/reflect/" > reflect< / a > < / dt >
< dd >
2020-12-01 06:12:22 -07:00
< p > <!-- CL 248341, golang.org/issues/40281 -->
< code > StructTag< / code > now allows multiple space-separated keys
in key:value pairs, as in < code > `json xml:"field1"`< / code >
(equivalent to < code > `json:"field1" xml:"field1"`< / code > ).
2020-11-24 11:23:10 -07:00
< / p >
< / dd >
< / dl > <!-- reflect -->
2020-10-07 11:42:49 -06:00
< dl id = "runtime/debug" > < dt > < a href = "/pkg/runtime/debug/" > runtime/debug< / a > < / dt >
< dd >
< p > <!-- CL 249677 -->
2020-12-07 03:33:00 -07:00
The < a href = "/pkg/runtime#Error" > < code > runtime.Error< / code > < / a > values
2020-12-01 06:03:54 -07:00
used when < code > SetPanicOnFault< / code > is enabled may now have an
< code > Addr< / code > method. If that method exists, it returns the memory
address that triggered the fault.
2020-10-07 11:42:49 -06:00
< / p >
< / dd >
< / dl > <!-- runtime/debug -->
2020-10-09 06:18:05 -06:00
2020-11-25 12:07:30 -07:00
< dl id = "strconv" > < dt > < a href = "/pkg/strconv/" > strconv< / a > < / dt >
< dd >
< p > <!-- CL 260858 -->
< a href = "/pkg/strconv/#ParseFloat" > < code > ParseFloat< / code > < / a > now uses
the < a
href="https://nigeltao.github.io/blog/2020/eisel-lemire.html">Eisel-Lemire
algorithm< / a > , improving performance by up to a factor of 2. This can
also speed up decoding textual formats like < a
href="/pkg/encoding/json/">< code > encoding/json< / code > < / a > .
< / p >
< / dd >
< / dl > <!-- strconv -->
2020-10-21 12:45:03 -06:00
< dl id = "syscall" > < dt > < a href = "/pkg/syscall/" > syscall< / a > < / dt >
< dd >
2020-12-03 11:53:41 -07:00
< p > <!-- CL 263271 -->
< a href = "/pkg/syscall/?GOOS=windows#NewCallback" > < code > NewCallback< / code > < / a >
and
< a href = "/pkg/syscall/?GOOS=windows#NewCallbackCDecl" > < code > NewCallbackCDecl< / code > < / a >
now correctly support callback functions with multiple
sub-< code > uintptr< / code > -sized arguments in a row. This may
require changing uses of these functions to eliminate manual
padding between small arguments.
< / p >
2020-10-21 12:45:03 -06:00
< p > <!-- CL 261917 -->
2020-12-03 11:53:41 -07:00
< a href = "/pkg/syscall/?GOOS=windows#SysProcAttr" > < code > SysProcAttr< / code > < / a > on Windows has a new NoInheritHandles field that disables inheriting handles when creating a new process.
2020-10-21 12:45:03 -06:00
< / p >
2020-11-13 07:48:05 -07:00
< p > <!-- CL 269761, golang.org/issue/42584 -->
2020-12-03 11:53:41 -07:00
< a href = "/pkg/syscall/?GOOS=windows#DLLError" > < code > DLLError< / code > < / a > on Windows now has an Unwrap function for unwrapping its underlying error.
2020-11-13 07:48:05 -07:00
< / p >
2020-11-24 11:23:10 -07:00
< p > <!-- CL 210639 -->
2020-12-03 08:03:22 -07:00
On Linux,
< a href = "/pkg/syscall/#Setgid" > < code > Setgid< / code > < / a > ,
< a href = "/pkg/syscall/#Setuid" > < code > Setuid< / code > < / a > ,
and related calls are now implemented.
Previously, they returned an < code > syscall.EOPNOTSUPP< / code > error.
2020-11-24 11:23:10 -07:00
< / p >
2020-10-21 12:45:03 -06:00
< / dd >
< / dl > <!-- syscall -->
2020-11-24 11:23:10 -07:00
< dl id = "text/template" > < dt > < a href = "/pkg/text/template/" > text/template< / a > < / dt >
< dd >
2020-12-01 05:54:53 -07:00
< p > <!-- CL 254257, golang.org/issue/29770 -->
Newlines characters are now allowed inside action delimiters,
permitting actions to span multiple lines.
2020-11-24 11:23:10 -07:00
< / p >
< / dd >
< / dl > <!-- text/template -->
2020-11-25 12:07:30 -07:00
< dl id = "text/template/parse" > < dt > < a href = "/pkg/text/template/parse/" > text/template/parse< / a > < / dt >
< dd >
< p > <!-- CL 229398, golang.org/issue/34652 -->
A new < a href = "/pkg/text/template/parse/#CommentNode" > < code > CommentNode< / code > < / a >
was added to the parse tree. The < a href = "/pkg/text/template/parse/#Mode" > < code > Mode< / code > < / a >
field in the < code > parse.Tree< / code > enables access to it.
< / p >
< / dd >
< / dl > <!-- text/template/parse -->
2020-11-24 11:23:10 -07:00
< dl id = "time/tzdata" > < dt > < a href = "/pkg/time/tzdata/" > time/tzdata< / a > < / dt >
< dd >
< p > <!-- CL 261877 -->
2020-11-25 12:07:30 -07:00
The slim timezone data format is now used for the timezone database in
2020-11-25 04:57:38 -07:00
< code > $GOROOT/lib/time/zoneinfo.zip< / code > and the embedded copy in this
2020-11-25 12:07:30 -07:00
package. This reduces the size of the timezone database by about 350 KB.
2020-11-24 11:23:10 -07:00
< / p >
< / dd >
< / dl > <!-- time/tzdata -->
2020-11-25 12:07:30 -07:00
< dl id = "unicode" > < dt > < a href = "/pkg/unicode/" > unicode< / a > < / dt >
< dd >
< p > <!-- CL 248765 -->
The < a href = "/pkg/unicode/" > < code > unicode< / code > < / a > package and associated
support throughout the system has been upgraded from Unicode 12.0.0 to
< a href = "https://www.unicode.org/versions/Unicode13.0.0/" > Unicode 13.0.0< / a > ,
which adds 5,930 new characters, including four new scripts, and 55 new emoji.
Unicode 13.0.0 also designates plane 3 (U+30000-U+3FFFF) as the tertiary
ideographic plane.
< / p >
< / dd >
< / dl > <!-- unicode -->
