go/doc/go_tutorial.txt

Let's Go
----

Rob Pike

----
(September 14, 2008)


This document is a tutorial introduction to the basics of the Go systems programming
language, intended for programmers familiar with C or C++. It is not a comprehensive
guide to the language; at the moment the document closest to that is the draft
specification:

	/doc/go_lang.html

To check out the compiler and tools and be ready to run Go programs, see

	/doc/go_setup.html

The presentation proceeds through a series of modest programs to illustrate
key features of the language.  All the programs work (at time of writing) and are
checked in at

	/doc/progs

Program snippets are annotated with the line number in the original file; for
cleanliness, blank lines remain blank.

Hello, World
----

Let's start in the usual way:

--PROG progs/helloworld.go

Every Go source file declares which package it's part of using a "package" statement.
The "main" package's "main" function is where the program starts running (after
any initialization).

Function declarations are introduced with the "func" keyword.

Notice that string constants can contain Unicode characters, encoded in UTF-8.
Go is defined to accept UTF-8 input.  Strings are arrays of bytes, usually used
to store Unicode strings represented in UTF-8.

The built-in function "print()" has been used during the early stages of
development of the language but is not guaranteed to last.  Here's a better version of the
program that doesn't depend on "print()":

--PROG progs/helloworld2.go

This version imports the ''os'' package to acess its "Stdout" variable, of type
"*OS.FD"; given "OS.Stdout" we can use its "WriteString" method to print the string.

The comment convention is the same as in C++:

	/* ... */
	// ...

Echo
----

Next up, here's a version of the Unix utility "echo(1)":

--PROG progs/echo.go

It's still fairly small but it's doing a number of new things.  In the last example,
we saw "func" introducing a function.  The keywords "var", "const", and "type"
(not used yet) also introduce declarations, as does "import".
Notice that we can group declarations of the same sort into
parenthesized, semicolon-separated lists if we want, as on lines 3-6 and 10-13.
But it's not necessary to do so; we could have said

	const Space = " "
	const Newline = "\n"

Semicolons aren't needed here; in fact, semicolons are unnecessary after any
top-level declaration, even though they are needed as separators <i>within</i>
a parenthesized list of declarations.

Having imported the "Flag" package, line 8 creates a global variable to hold
the value of echo's -n flag.  (The nil hides a nice feature not needed here;
see the source in "src/lib/flag.go" for details).

In "main.main", we parse the arguments (line 16) and then create a local
string variable we will use to build the output.

The declaration statement has the form

	var s string = "";

This is the "var" keyword, followed by the name of the variable, followed by
its type, followed by an equals sign and an initial value for the variable.

Go tries to be terse, and this declaration could be shortened.  Since the
string constant is of type string, we don't have to tell the compiler that.
We could write

	var s = "";

or we could go even shorter and write the idiom

	s := "";

The := operator is used a lot in Go to represent an initializing declaration.
(For those who know Limbo, its := construct is the same, but notice
that Go has no colon after the name in a full "var" declaration.)
And there's one in the "for" clause on the next line:

--PROG  progs/echo.go /for/

The "Flag" package has parsed the arguments and left the non-flag arguments
in a list that can be iterated over in the obvious way.

The Go "for" statement differs from that of C in a number of ways.  First,
it's the only looping construct; there is no "while" or "do".  Second,
there are no parentheses on the clause, but the braces on the body
are mandatory.  (The same applies to the "if" statement.) Later examples
will show some other ways "for" can be written.

The body of the loop builds up the string "s" by appending (using +=)
the flags and separating spaces. After the loop, if the "-n" flag is not
set, it appends a newline, and then writes the result.

Notice that "main.main" is a niladic function with no return type.
It's defined that way.  Falling off the end of "main.main" means
''success''; if you want to signal erroneous return, use

	sys.exit(1)

The "sys" package is built in and contains some essentials for getting
started; for instance, "sys.argc()" and "sys.argv(int)" are used by the
"Flag" package to access the arguments.

An Interlude about Types
----

Go has some familiar types such as "int" and "float", which represent
values of the ''appropriate'' size for the machine. It also defines
specifically-sized types such as "int8", "float64", and so on, plus
unsigned integer types such as "uint", "uint32", etc.  And then there
is a "byte" synonym for "uint8", which is the element type for
strings.

Speaking of "string", that's a built-in type as well.  Strings are
<i>immutable values</i> -- they are not just arrays of "byte" values.
Once you've built a string <i>value</i>, you can't change it, although
of course you can change a string <i>variable</i> simply by
reassigning it.  This snippet from "strings.go" is legal code:

--PROG progs/strings.go /hello/ /ciao/

However the following statements are illegal because they would modify
a "string" value:

	s[0] = 'x';
	(*p)[1] = 'y';

In C++ terms, Go strings are a bit like "const strings", while pointers
to strings are analogous to "const string" references.

Yes, there are pointers.  However, Go simplifies their use a little;
read on.

Arrays are declared like this:

	var array_of_int [10]int;

Arrays, like strings, are values, but they are mutable. This differs
from C, in which "array_of_int" would be usable as a pointer to "int".
In Go, since arrays are values, it's meaningful (and useful) to talk
about pointers to arrays.

The size of the array is part of its type; however, one can declare
an <i>open array</i> variable, to which one can assign any array value
with the same element type.
(At the moment, only <i>pointers</i> to open arrays are implemented.)
Thus one can write this function (from "sum.go"):

--PROG progs/sum.go /sum/ /^}/

and invoke it like this:

--PROG progs/sum.go /1,2,3/

Note how the return type ("int") is defined for "sum()" by stating it
after the parameter list.  Also observe that although the argument
is a pointer to an array, we can index it directly ("a[i]" not "(*a)[i]").
The expression "[]int{1,2,3}" -- a type followed by a brace-bounded expression
-- is a constructor for a value, in this case an array of "int". We pass it
to "sum()" by taking its address.

The built-in function "len()" appeared there too - it works on strings,
arrays, and maps, which can be built like this:

	m := map[string] int {"one":1 , "two":2}

At least for now, maps are <i>always</i> pointers, so in this example
"m" has type "*map[string]int".  This may change.

You can also create a map (or anything else) with the built-in "new()"
function:

	m := new(map[string] int)

The "new()" function always returns a pointer, an address for the object
it creates.

An Interlude about Constants
----

Although integers come in lots of sizes in Go, integer constants do not.
There are no constants like "0ll" or "0x0UL".   Instead, integer
constants are evaluated as ideal, large-precision values that
can overflow only when they are assigned to an integer variable with
too little precision to represent the value.

	const hard_eight = (1 << 100) >> 97  // legal

There are nuances that deserve redirection to the legalese of the
language specification but here are some illustrative examples:

	var a uint64 = 0  // a has type uint64, value 0
	a := uint64(0)    // equivalent; uses a "conversion"
	i := 0x1234       // i gets default type: int
	var j int = 1e6   // legal - 1000000 is representable in an int
	x := 1.5          // a float
	i3div2 = 3/2      // integer division - result is 1
	f3div2 = 3./2.    // floating point division - result is 1.5

Conversions only work for simple cases such as converting ints of one
sign or size to another, and between ints and floats, plus a few other
simple cases.  There are no automatic conversions of any kind in Go,
other than that of making constants have concrete size and type when
assigned to a variable.

An I/O Package
----

Next we'll look at a simple package for doing file I/O with the usual
sort of open/close/read/write interface.  Here's the start of "fd.go":

--PROG progs/fd.go /package/ /^}/

The first line declares the name of the package -- "fd" for ''file descriptor'' --
and then we import the low-level, external "syscall" package, which provides
a primitive interface to the underlying operating system's calls.

Next is a type definition: the "type" keyword introduces a type declaration,
in this case a data structure called "FD".
To make things a little more interesting, our "FD" includes the name of the file
that the file descriptor refers to.  The "export" keyword makes the declared
structure visible to users of the package.

Now we can write what is often called a factory:

--PROG progs/fd.go /NewFD/ /^}/

This returns a pointer to a new "FD" structure with the file descriptor and name
filled in.  We can use it to construct some familiar, exported variables of type "*FD":

--PROG progs/fd.go /export.var/ /^.$/

The "NewFD" function was not exported because it's internal. The proper factory
to use is "Open":

--PROG progs/fd.go /func.Open/ /^}/

There are a number of new things in these few lines.  First, "Open" returns
multiple values, an "FD" and an "errno" (Unix error number).  We declare the
multi-value return as a parenthesized list of declarations.  "Syscall.open"
also has a multi-value return, which we can grab with the multi-variable
declaration on line 27; it declares "r" and "e" to hold the two values,
both of type "int64" (although you'd have to look at the "syscall" package
to see that).  Finally, line 28 returns two values: a pointer to the new "FD"
and the return code.  If "Syscall.open" failed, the file descriptor "r" will
be negative and "NewFD" will return "nil".

Now that we can build "FDs", we can write methods to use them. To declare
a method of a type, we define a function to have an explicit receiver
of that type, placed
in parentheses before the function name. Here are some methods for "FD",
each of which declares a receiver variable "fd".

--PROG progs/fd.go /Close/ END

There is no implicit "this" and the receiver variable must be used to access
members of the structure.  Methods are not declared within
the "struct" declaration itself.  The "struct" declaration defines only data members.

Finally, we can use our new package:

--PROG progs/helloworld3.go

and run the program:

	% helloworld3
	hello, world
	can't open file; errno=2
	% 

Rotting cats
----

Building on the FD package, here's a simple version of the Unix utility "cat(1)", "progs/cat.go":

--PROG progs/cat.go

By now this should be easy to follow, but the "switch" statement introduces some
new features.  Like a "for" loop, an "if" or "switch" can include an
initialization statement.  The "switch" on line 12 uses one to create variables
"nr" and "er" to hold the return values from "fd.Read()".  (The "if" on line 19
has the same idea.)  The "switch" statement is general: it evaluates the cases
from  top to bottom looking for the first case that matches the value; the
case expressions don't need to be constants or even integers, as long as
they all have the same type.

Since the "switch" value is just "true", we could leave it off -- as is also true
in a "for" statement, a missing value means "true".  In fact, such a "switch"
is a form of "if-else" chain.

Line 19 calls "Write()" by slicing (a pointer to) the array, creating a
<i>reference slice</i>.

Now let's make a variant of "cat" that optionally does "rot13" on its input.
It's easy to do by just processing the bytes, but instead we will exploit
Go's notion of an <i>interface</i>.

The "cat()" subroutine uses only two methods of "fd": "Read()" and "Name()",
so let's start by defining an interface that has exactly those two methods.
Here is code from "progs/cat_rot13.go":

--PROG progs/cat_rot13.go /type.Reader/ /^}/

Any type that implements the two methods of "Reader" -- regardless of whatever
other methods the type may also contain -- is said to <i>implement</i> the
interface.  Since "FD.FD" implements these methods, it implements the
"Reader" interface.  We could tweak the "cat" subroutine to accept a "Reader"
instead of a "*FD.FD" and it would work just fine, but let's embellish a little
first by writing a second type that implements "Reader", one that wraps an
existing "Reader" and does "rot13" on the data. To do this, we just define
the type and implement the methods and with no other bookkeeping,
we have a second implementation of the "Reader" interface.

--PROG progs/cat_rot13.go /type.Rot13/ /end.of.Rot13/

(The "rot13" function called on line 39 is trivial and not worth reproducing.)

To use the new feature, we define a flag:

--PROG progs/cat_rot13.go /rot13_flag/

and use it from within a mostly unchanged "cat()" function:

--PROG progs/cat_rot13.go /func.cat/ /^}/

Lines 53 and 54 set it all up: If the "rot13" flag is true, wrap the "Reader"
we received into a "Rot13" and proceed.  Note that the interface variables
are values, not pointers: the argument is of type "Reader", not "*Reader",
even though under the covers it holds a pointer to a "struct".

Here it is in action:

<pre>
	% echo abcdefghijklmnopqrstuvwxyz | ./cat
	abcdefghijklmnopqrstuvwxyz
	% echo abcdefghijklmnopqrstuvwxyz | ./cat --rot13
	nopqrstuvwxyzabcdefghijklm
	% 
</pre>

Fans of dependency injection may take cheer from how easily interfaces
made substituting the implementation of a file descriptor.

Interfaces are a distinct feature of Go.  An interface is implemented by a
type if the type implements all the methods declared in the interface.
This means
that a type may implement an arbitrary number of different interfaces.
There is no type hierarchy; things can be much more <i>ad hoc</i>,
as we saw with "rot13".  "FD.FD" implements "Reader"; it could also
implement a "Writer", or any other interface built from its methods that
fits the current situation. Consider the <i>empty interface</i>

<pre>
	type interface Empty {}
</pre>

<i>Every</i> type implements the empty interface, which makes it
useful for things like containers.

Sorting
----

As another example of interfaces, consider this simple sort algorithm,
taken from "progs/sort.go":

--PROG progs/sort.go /func.Sort/ /^}/

The code needs only three methods, which we wrap into "SortInterface":

--PROG progs/sort.go /interface/ /^}/

We can apply "Sort" to any type that implements "len", "less", and "swap".
The "sort" package includes the necessary methods to allow sorting of
arrays of integers, strings, etc.; here's the code for arrays of "int":

--PROG progs/sort.go /type.*IntArray/ /swap/

And now a routine to test it out, from "progs/sortmain.go".  This
uses a function in the "sort" package, omitted here for brevity,
to test that the result is sorted.

--PROG progs/sortmain.go /func.ints/ /^}/

If we have a new type we want to be able to sort, all we need to do is
to implement the three methods for that type, like this:

--PROG progs/sortmain.go /type.Day/ /swap/

Prime numbers
----

Now we come to processes and communication -- concurrent programming.
It's a big subject so to be brief we assume some familiarity with the topic.

A classic program in the style is the prime sieve of Eratosthenes.
It works by taking a stream of all the natural numbers, and introducing
a sequence of filters, one for each prime, to winnow the multiples of
that prime.  At each step we have a sequence of filters of the primes
so far, and the next number to pop out is the next prime, which triggers
the creation of the next filter in the chain.

Here's a flow diagram; each box represents a filter element whose
creation is triggered by the first number that flowed from the
elements before it.

<br>

&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<img src='sieve.gif'>

<br>

To create a stream of integers, we use a Go <i>channel</i>, which,
borrowing from CSP's descendants, represents a communications
channel that can connect two concurrent computations.
In Go, channel variables are
always pointers to channels -- it's the object they point to that
does the communication.

Here is the first function in "progs/sieve.go":

--PROG progs/sieve.go /Send/ /^}/

The function "Generate" sends the sequence 2, 3, 4, 5, ... to its
argument channel, "ch", using the binary send operator "-&lt".
Channels block, so if there's no recipient for the the value on "ch",
the send operation will wait until one becomes available.

The "Filter" function has three arguments: an input channel, an output
channel, and a prime number.  It copies values from the input to the
output, discarding anything divisible by the prime.  The unary prefix
operator "&lt;-" (receive) retrieves the next value on the channel.

--PROG progs/sieve.go /Copy/ /^}/


The generator and filters execute concurrently.  Go has
its own model of process/threads/light-weight processes/coroutines,
so to avoid notational confusion we'll call concurrently executing
computations in Go <i>goroutines</i>.  To start a goroutine,
invoke the function, prefixing the call with the keyword "go";
this starts the function running in parallel with the current
computation but in the same address space:

	go sum(huge_array); // calculate sum in the background

If you want to know when the calculation is done, pass a channel
on which it can report back:

	ch := new(chan int);
	go sum(huge_array, ch);
	// ... do something else for a while
	result := <-ch;  // wait for, and retrieve, result

Back to our prime sieve.  Here's how the sieve pipeline is stitched
together:

--PROG progs/sieve.go /func.main/ /^}/

Line 23 creates the initial channel to pass to "Generate", which it
then starts up.  As each prime pops out of the channel, a new "Filter"
is added to the pipeline and <i>its</i> output becomes the new value
of "ch".

The sieve program can be tweaked to use a pattern common
in this style of programming.  Here is a variant version
of "Generate", from "progs/sieve1.go":

--PROG progs/sieve1.go /func.Generate/ /^}/

This version does all the setup internally. It creates the output
channel, launches a goroutine internally using a function literal, and
returns the channel to the caller.  It is a factory for concurrent
execution, starting the goroutine and returning its connection.
The same
change can be made to "Filter":

--PROG progs/sieve1.go /func.Filter/ /^}/

The "Sieve" function's main loop becomes simpler and clearer as a
result, and while we're at it let's turn it into a factory too:

--PROG progs/sieve1.go /func.Sieve/ /^}/

Now "main"'s interface to the prime sieve is a channel of primes:

--PROG progs/sieve1.go /func.main/ /^}/

Service
----

here we will describe this server:

--PROG progs/server.go

and this modification, which exits cleanly

--PROG progs/server1.go /func.Server/ END