2236 lines
66 KiB
Plaintext
2236 lines
66 KiB
Plaintext
.\" $XdotOrg: xserver/xorg/hw/xfree86/doc/man/xorg.conf.man.pre,v 1.7 2006/05/26 00:12:18 reed Exp $
|
|
.\" shorthand for double quote that works everywhere.
|
|
.ds q \N'34'
|
|
.TH __xconfigfile__ __filemansuffix__ __vendorversion__
|
|
.SH NAME
|
|
__xconfigfile__ \- configuration File for __xservername__ X server
|
|
.SH INTRODUCTION
|
|
.B __xservername__
|
|
supports several mechanisms for supplying/obtaining configuration and
|
|
run-time parameters: command line options, environment variables, the
|
|
__xconfigfile__ configuration file, auto-detection, and fallback defaults.
|
|
When the same information is supplied in more than one way, the highest
|
|
precedence mechanism is used. The list of mechanisms is ordered from
|
|
highest precedence to lowest. Note that not all parameters can be
|
|
supplied via all methods. The available command line options and
|
|
environment variables (and some defaults) are described in the Xserver(__appmansuffix__)
|
|
and __xservername__(__appmansuffix__) manual pages. Most configuration file parameters, with
|
|
their defaults, are described below. Driver and module specific
|
|
configuration parameters are described in the relevant driver or module
|
|
manual page.
|
|
.SH DESCRIPTION
|
|
.B __xservername__
|
|
uses a configuration file called
|
|
.I __xconfigfile__
|
|
for its initial setup.
|
|
This configuration file is searched for in the following places when the
|
|
server is started as a normal user:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.IR /etc/X11/ <cmdline>
|
|
.IR __projectroot__/etc/X11/ <cmdline>
|
|
.IB /etc/X11/ $XORGCONFIG
|
|
.IB __projectroot__/etc/X11/ $XORGCONFIG
|
|
.I /etc/X11/__xconfigfile__\-4
|
|
.I /etc/X11/__xconfigfile__
|
|
.I /etc/__xconfigfile__
|
|
.IR __projectroot__/etc/X11/__xconfigfile__. <hostname>
|
|
.I __projectroot__/etc/X11/__xconfigfile__\-4
|
|
.I __projectroot__/etc/X11/__xconfigfile__
|
|
.IR __projectroot__/lib/X11/__xconfigfile__. <hostname>
|
|
.I __projectroot__/lib/X11/__xconfigfile__\-4
|
|
.I __projectroot__/lib/X11/__xconfigfile__
|
|
.fi
|
|
.RE
|
|
.PP
|
|
where
|
|
.I <cmdline>
|
|
is a relative path (with no \(lq..\(rq components) specified with the
|
|
.B \-config
|
|
command line option,
|
|
.B $XORGCONFIG
|
|
is the relative path (with no \(lq..\(rq components) specified by that
|
|
environment variable, and
|
|
.I <hostname>
|
|
is the machine's hostname as reported by
|
|
.BR gethostname (__libmansuffix__).
|
|
.PP
|
|
When the __xservername__ server is started by the \(lqroot\(rq user, the config file
|
|
search locations are as follows:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
<cmdline>
|
|
.IR /etc/X11/ <cmdline>
|
|
.IR __projectroot__/etc/X11/ <cmdline>
|
|
.B $XORGCONFIG
|
|
.IB /etc/X11/ $XORGCONFIG
|
|
.IB __projectroot__/etc/X11/ $XORGCONFIG
|
|
.I /etc/X11/__xconfigfile__\-4
|
|
.I /etc/X11/__xconfigfile__
|
|
.I /etc/__xconfigfile__
|
|
.IR __projectroot__/etc/X11/__xconfigfile__. <hostname>
|
|
.I __projectroot__/etc/X11/__xconfigfile__\-4
|
|
.I __projectroot__/etc/X11/__xconfigfile__
|
|
.IR __projectroot__/lib/X11/__xconfigfile__. <hostname>
|
|
.I __projectroot__/lib/X11/__xconfigfile__\-4
|
|
.I __projectroot__/lib/X11/__xconfigfile__
|
|
.fi
|
|
.RE
|
|
.PP
|
|
where
|
|
.I <cmdline>
|
|
is the path specified with the
|
|
.B \-config
|
|
command line option (which may be absolute or relative),
|
|
.B $XORGCONFIG
|
|
is the path specified by that
|
|
environment variable (absolute or relative),
|
|
.B $HOME
|
|
is the path specified by that environment variable (usually the home
|
|
directory), and
|
|
.I <hostname>
|
|
is the machine's hostname as reported by
|
|
.BR gethostname (__libmansuffix__).
|
|
.PP
|
|
The
|
|
.I __xconfigfile__
|
|
file is composed of a number of sections which may be present in any order.
|
|
Each section has the form:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.BI "Section \*q" SectionName \*q
|
|
.RI " " SectionEntry
|
|
...
|
|
.B EndSection
|
|
.fi
|
|
.RE
|
|
.PP
|
|
The section names are:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.BR "Files " "File pathnames"
|
|
.BR "ServerFlags " "Server flags"
|
|
.BR "Module " "Dynamic module loading"
|
|
.BR "Extensions " "Extension enabling"
|
|
.BR "InputDevice " "Input device description"
|
|
.BR "Device " "Graphics device description"
|
|
.BR "VideoAdaptor " "Xv video adaptor description"
|
|
.BR "Monitor " "Monitor description"
|
|
.BR "Modes " "Video modes descriptions"
|
|
.BR "Screen " "Screen configuration"
|
|
.BR "ServerLayout " "Overall layout"
|
|
.BR "DRI " "DRI\-specific configuration"
|
|
.BR "Vendor " "Vendor\-specific configuration"
|
|
.fi
|
|
.RE
|
|
.PP
|
|
The following obsolete section names are still recognised for compatibility
|
|
purposes.
|
|
In new config files, the
|
|
.B InputDevice
|
|
section should be used instead.
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.BR "Keyboard " "Keyboard configuration"
|
|
.BR "Pointer " "Pointer/mouse configuration"
|
|
.fi
|
|
.RE
|
|
.PP
|
|
The old
|
|
.B XInput
|
|
section is no longer recognised.
|
|
.PP
|
|
The
|
|
.B ServerLayout
|
|
sections are at the highest level.
|
|
They bind together the input and output devices that will be used in a session.
|
|
The input devices are described in the
|
|
.B InputDevice
|
|
sections.
|
|
Output devices usually consist of multiple independent components (e.g.,
|
|
a graphics board and a monitor).
|
|
These multiple components are bound together in the
|
|
.B Screen
|
|
sections, and it is these that are referenced by the
|
|
.B ServerLayout
|
|
section.
|
|
Each
|
|
.B Screen
|
|
section binds together a graphics board and a monitor.
|
|
The graphics boards are described in the
|
|
.B Device
|
|
sections, and the monitors are described in the
|
|
.B Monitor
|
|
sections.
|
|
.PP
|
|
Config file keywords are case\-insensitive, and \(lq_\(rq characters are
|
|
ignored.
|
|
Most strings (including
|
|
.B Option
|
|
names) are also case-insensitive, and insensitive to white space and
|
|
\(lq_\(rq characters.
|
|
.PP
|
|
Each config file entry usually takes up a single line in the file. They
|
|
consist of a keyword, which is possibly followed by one or more arguments,
|
|
with the number and types of the arguments depending on the keyword.
|
|
The argument types are:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.BR "Integer " "an integer number in decimal, hex or octal"
|
|
.BR "Real " "a floating point number"
|
|
.BR "String " "a string enclosed in double quote marks (\*q)"
|
|
.fi
|
|
.RE
|
|
.PP
|
|
Note: hex integer values must be prefixed with \(lq0x\(rq, and octal values
|
|
with \(lq0\(rq.
|
|
.PP
|
|
A special keyword called
|
|
.B Option
|
|
may be used to provide free\-form data to various components of the server.
|
|
The
|
|
.B Option
|
|
keyword takes either one or two string arguments.
|
|
The first is the option name, and the optional second argument is the
|
|
option value.
|
|
Some commonly used option value types include:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.BR "Integer " "an integer number in decimal, hex or octal"
|
|
.BR "Real " "a floating point number"
|
|
.BR "String " "a sequence of characters"
|
|
.BR "Boolean " "a boolean value (see below)"
|
|
.BR "Frequency " "a frequency value (see below)"
|
|
.fi
|
|
.RE
|
|
.PP
|
|
Note that
|
|
.I all
|
|
.B Option
|
|
values, not just strings, must be enclosed in quotes.
|
|
.PP
|
|
Boolean options may optionally have a value specified.
|
|
When no value is specified, the option's value is
|
|
.BR TRUE .
|
|
The following boolean option values are recognised as
|
|
.BR TRUE :
|
|
.PP
|
|
.RS 4
|
|
.BR 1 ,
|
|
.BR on ,
|
|
.BR true ,
|
|
.B yes
|
|
.RE
|
|
.PP
|
|
and the following boolean option values are recognised as
|
|
.BR FALSE :
|
|
.PP
|
|
.RS 4
|
|
.BR 0 ,
|
|
.BR off ,
|
|
.BR false ,
|
|
.B no
|
|
.RE
|
|
.PP
|
|
If an option name is prefixed with
|
|
.RB \*q No \*q,
|
|
then the option value is negated.
|
|
.PP
|
|
Example: the following option entries are equivalent:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.B "Option \*qAccel\*q \*qOff\*q"
|
|
.B "Option \*qNoAccel\*q"
|
|
.B "Option \*qNoAccel\*q \*qOn\*q"
|
|
.B "Option \*qAccel\*q \*qfalse\*q"
|
|
.B "Option \*qAccel\*q \*qno\*q"
|
|
.fi
|
|
.RE
|
|
.PP
|
|
Frequency option values consist of a real number that is optionally
|
|
followed by one of the following frequency units:
|
|
.PP
|
|
.RS 4
|
|
.BR Hz ,
|
|
.BR k ,
|
|
.BR kHz ,
|
|
.BR M ,
|
|
.B MHz
|
|
.RE
|
|
.PP
|
|
When the unit name is omitted, the correct units will be determined from
|
|
the value and the expectations of the appropriate range of the value.
|
|
It is recommended that the units always be specified when using frequency
|
|
option values to avoid any errors in determining the value.
|
|
.SH "FILES SECTION"
|
|
The
|
|
.B Files
|
|
section is used to specify some path names required by the server.
|
|
Some of these paths can also be set from the command line (see
|
|
.BR Xserver (__appmansuffix__)
|
|
and
|
|
.BR __xservername__ (__appmansuffix__)).
|
|
The command line settings override the values specified in the config
|
|
file.
|
|
The
|
|
.B Files
|
|
section is optional, as are all of the entries that may appear in it.
|
|
.PP
|
|
The entries that can appear in this section are:
|
|
.TP 7
|
|
.BI "FontPath \*q" path \*q
|
|
sets the search path for fonts.
|
|
This path is a comma separated list of font path elements which the __xservername__
|
|
server searches for font databases.
|
|
Multiple
|
|
.B FontPath
|
|
entries may be specified, and they will be concatenated to build up the
|
|
fontpath used by the server. Font path elements can be absolute
|
|
directory paths, catalogue directories or a font server identifier. The
|
|
formats of the later two are explained below:
|
|
.PP
|
|
.RS 7
|
|
Catalogue directories:
|
|
.PP
|
|
.RS 4
|
|
Catalogue directories can be specified using the prefix \fBcatalogue:\fR
|
|
before the directory name. The directory can then be populated with
|
|
symlinks pointing to the real font directories, using the following
|
|
syntax in the symlink name:
|
|
.PP
|
|
.RS 4
|
|
.IR <identifier> : [attribute]: pri= <priority>
|
|
.RE
|
|
.PP
|
|
where
|
|
.I <identifier>
|
|
is an alphanumeric identifier,
|
|
.I [attribute]
|
|
is an attribute which will be passed to the underlying FPE and
|
|
.I <priority>
|
|
is a number used to order the fontfile FPEs. Examples:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.I 75dpi:unscaled:pri=20 -> /usr/share/X11/fonts/75dpi
|
|
.I gscript:pri=60 -> /usr/share/fonts/default/ghostscript
|
|
.I misc:unscaled:pri=10 \-> /usr/share/X11/fonts/misc
|
|
.fi
|
|
.PP
|
|
.RE .RE .RE
|
|
.PP
|
|
.RS 7
|
|
Font server identifiers:
|
|
.PP
|
|
.RS 4
|
|
Font server identifiers have the form:
|
|
.RS 4
|
|
.PP
|
|
.IR <trans> / <hostname> : <port\-number>
|
|
.RE
|
|
.PP
|
|
where
|
|
.I <trans>
|
|
is the transport type to use to connect to the font server (e.g.,
|
|
.B unix
|
|
for UNIX\-domain sockets or
|
|
.B tcp
|
|
for a TCP/IP connection),
|
|
.I <hostname>
|
|
is the hostname of the machine running the font server, and
|
|
.I <port\-number>
|
|
is the port number that the font server is listening on (usually 7100).
|
|
.RE
|
|
.PP
|
|
When this entry is not specified in the config file, the server falls back
|
|
to the compiled\-in default font path, which contains the following
|
|
font path elements (which can be set inside a catalogue directory):
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.I __projectroot__/lib/X11/fonts/misc/
|
|
.I __projectroot__/lib/X11/fonts/TTF/
|
|
.I __projectroot__/lib/X11/fonts/Type1/
|
|
.I __projectroot__/lib/X11/fonts/75dpi/
|
|
.I __projectroot__/lib/X11/fonts/100dpi/
|
|
.fi
|
|
.RE
|
|
.PP
|
|
The recommended font path contains the following font path elements:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.I __projectroot__/lib/X11/fonts/local/
|
|
.I __projectroot__/lib/X11/fonts/misc/
|
|
.I __projectroot__/lib/X11/fonts/75dpi/:unscaled
|
|
.I __projectroot__/lib/X11/fonts/100dpi/:unscaled
|
|
.I __projectroot__/lib/X11/fonts/Type1/
|
|
.I __projectroot__/lib/X11/fonts/75dpi/
|
|
.I __projectroot__/lib/X11/fonts/100dpi/
|
|
.fi
|
|
.RE
|
|
.PP
|
|
Font path elements that are found to be invalid are removed from the
|
|
font path when the server starts up.
|
|
.RE
|
|
.TP 7
|
|
.BI "ModulePath \*q" path \*q
|
|
sets the search path for loadable __xservername__ server modules.
|
|
This path is a comma separated list of directories which the __xservername__ server
|
|
searches for loadable modules loading in the order specified.
|
|
Multiple
|
|
.B ModulePath
|
|
entries may be specified, and they will be concatenated to build the
|
|
module search path used by the server.
|
|
.\" The LogFile keyword is not currently implemented
|
|
.ig
|
|
.TP 7
|
|
.BI "LogFile \*q" path \*q
|
|
sets the name of the __xservername__ server log file.
|
|
The default log file name is
|
|
.PP
|
|
.RS 11
|
|
.RI __logdir__/__xservername__. <n> .log
|
|
.RE
|
|
.PP
|
|
.RS 7
|
|
where
|
|
.I <n>
|
|
is the display number for the __xservername__ server.
|
|
..
|
|
.SH "SERVERFLAGS SECTION"
|
|
In addition to options specific to this section (described below), the
|
|
.B ServerFlags
|
|
section is used to specify some global
|
|
__xservername__ server options.
|
|
All of the entries in this section are
|
|
.BR Options ,
|
|
although for compatibility purposes some of the old style entries are
|
|
still recognised.
|
|
Those old style entries are not documented here, and using them is
|
|
discouraged.
|
|
The
|
|
.B ServerFlags
|
|
section is optional, as are the entries that may be specified in it.
|
|
.PP
|
|
.B Options
|
|
specified in this section (with the exception of the
|
|
.B \*qDefaultServerLayout\*q
|
|
.BR Option )
|
|
may be overridden by
|
|
.B Options
|
|
specified in the active
|
|
.B ServerLayout
|
|
section.
|
|
Options with command line equivalents are overridden when their command
|
|
line equivalent is used.
|
|
The options recognised by this section are:
|
|
.TP 7
|
|
.BI "Option \*qDefaultServerLayout\*q \*q" layout\-id \*q
|
|
This specifies the default
|
|
.B ServerLayout
|
|
section to use in the absence of the
|
|
.B \-layout
|
|
command line option.
|
|
.TP 7
|
|
.BI "Option \*qNoTrapSignals\*q \*q" boolean \*q
|
|
This prevents the __xservername__ server from trapping a range of unexpected fatal
|
|
signals and exiting cleanly.
|
|
Instead, the __xservername__ server will die and drop core where the fault occurred.
|
|
The default behaviour is for the __xservername__ server to exit cleanly, but still drop a
|
|
core file.
|
|
In general you never want to use this option unless you are debugging an __xservername__
|
|
server problem and know how to deal with the consequences.
|
|
.TP 7
|
|
.BI "Option \*qDontVTSwitch\*q \*q" boolean \*q
|
|
This disallows the use of the
|
|
.BI Ctrl+Alt+F n
|
|
sequence (where
|
|
.RI F n
|
|
refers to one of the numbered function keys).
|
|
That sequence is normally used to switch to another \*qvirtual terminal\*q
|
|
on operating systems that have this feature.
|
|
When this option is enabled, that key sequence has no special meaning and
|
|
is passed to clients.
|
|
Default: off.
|
|
.TP 7
|
|
.BI "Option \*qDontZap\*q \*q" boolean \*q
|
|
This disallows the use of the
|
|
.B Terminate_Server
|
|
XKB action (usually on Ctrl+Alt+Backspace, depending on XKB options).
|
|
This action is normally used to terminate the __xservername__ server.
|
|
When this option is enabled, the action has no effect.
|
|
Default: off.
|
|
.TP 7
|
|
.BI "Option \*qDontZoom\*q \*q" boolean \*q
|
|
This disallows the use of the
|
|
.B Ctrl+Alt+Keypad\-Plus
|
|
and
|
|
.B Ctrl+Alt+Keypad\-Minus
|
|
sequences.
|
|
These sequences allows you to switch between video modes.
|
|
When this option is enabled, those key sequences have no special meaning
|
|
and are passed to clients.
|
|
Default: off.
|
|
.TP 7
|
|
.BI "Option \*qDisableVidModeExtension\*q \*q" boolean \*q
|
|
This disables the parts of the VidMode extension used by the xvidtune client
|
|
that can be used to change the video modes.
|
|
Default: the VidMode extension is enabled.
|
|
.TP 7
|
|
.BI "Option \*qAllowNonLocalXvidtune\*q \*q" boolean \*q
|
|
This allows the xvidtune client (and other clients that use the VidMode
|
|
extension) to connect from another host.
|
|
Default: off.
|
|
.TP 7
|
|
.BI "Option \*qAllowMouseOpenFail\*q \*q" boolean \*q
|
|
This allows the server to start up even if the mouse device can't be
|
|
opened/initialised.
|
|
Default: false.
|
|
.TP 7
|
|
.BI "Option \*qVTSysReq\*q \*q" boolean \*q
|
|
enables the SYSV\-style VT switch sequence for non\-SYSV systems
|
|
which support VT switching.
|
|
This sequence is
|
|
.B Alt\-SysRq
|
|
followed by a function key
|
|
.RB ( Fn ).
|
|
This prevents the __xservername__ server trapping the
|
|
keys used for the default VT switch sequence, which means that clients can
|
|
access them.
|
|
Default: off.
|
|
.TP 7
|
|
.BI "Option \*qXkbDisable\*q \*q" boolean \*q
|
|
disable/enable the XKEYBOARD extension.
|
|
The \-kb command line option overrides this config file option.
|
|
Default: XKB is enabled.
|
|
.\" The following four options are "undocumented".
|
|
.ig
|
|
.TP 7
|
|
.BI "Option \*qPciProbe1\*q"
|
|
Use PCI probe method 1.
|
|
Default: set.
|
|
.TP 7
|
|
.BI "Option \*qPciProbe2\*q"
|
|
Use PCI probe method 2.
|
|
Default: not set.
|
|
.TP 7
|
|
.BI "Option \*qPciForceConfig1\*q"
|
|
Force the use PCI config type 1.
|
|
Default: not set.
|
|
.TP 7
|
|
.BI "Option \*qPciForceConfig2\*q"
|
|
Force the use PCI config type 2.
|
|
Default: not set.
|
|
..
|
|
.TP 7
|
|
.BI "Option \*qBlankTime\*q \*q" time \*q
|
|
sets the inactivity timeout for the
|
|
.B blank
|
|
phase of the screensaver.
|
|
.I time
|
|
is in minutes.
|
|
This is equivalent to the __xservername__ server's
|
|
.B \-s
|
|
flag, and the value can be changed at run\-time with
|
|
.BR xset(__appmansuffix__).
|
|
Default: 10 minutes.
|
|
.TP 7
|
|
.BI "Option \*qStandbyTime\*q \*q" time \*q
|
|
sets the inactivity timeout for the
|
|
.B standby
|
|
phase of DPMS mode.
|
|
.I time
|
|
is in minutes, and the value can be changed at run\-time with
|
|
.BR xset(__appmansuffix__).
|
|
Default: 20 minutes.
|
|
This is only suitable for VESA DPMS compatible monitors, and may not be
|
|
supported by all video drivers.
|
|
It is only enabled for screens that have the
|
|
.B \*qDPMS\*q
|
|
option set (see the MONITOR section below).
|
|
.TP 7
|
|
.BI "Option \*qSuspendTime\*q \*q" time \*q
|
|
sets the inactivity timeout for the
|
|
.B suspend
|
|
phase of DPMS mode.
|
|
.I time
|
|
is in minutes, and the value can be changed at run\-time with
|
|
.BR xset(__appmansuffix__).
|
|
Default: 30 minutes.
|
|
This is only suitable for VESA DPMS compatible monitors, and may not be
|
|
supported by all video drivers.
|
|
It is only enabled for screens that have the
|
|
.B \*qDPMS\*q
|
|
option set (see the MONITOR section below).
|
|
.TP 7
|
|
.BI "Option \*qOffTime\*q \*q" time \*q
|
|
sets the inactivity timeout for the
|
|
.B off
|
|
phase of DPMS mode.
|
|
.I time
|
|
is in minutes, and the value can be changed at run\-time with
|
|
.BR xset(__appmansuffix__).
|
|
Default: 40 minutes.
|
|
This is only suitable for VESA DPMS compatible monitors, and may not be
|
|
supported by all video drivers.
|
|
It is only enabled for screens that have the
|
|
.B \*qDPMS\*q
|
|
option set (see the MONITOR section below).
|
|
.TP 7
|
|
.BI "Option \*qPixmap\*q \*q" bpp \*q
|
|
This sets the pixmap format to use for depth 24.
|
|
Allowed values for
|
|
.I bpp
|
|
are 24 and 32.
|
|
Default: 32 unless driver constraints don't allow this (which is rare).
|
|
Note: some clients don't behave well when this value is set to 24.
|
|
.TP 7
|
|
.BI "Option \*qPC98\*q \*q" boolean \*q
|
|
Specify that the machine is a Japanese PC\-98 machine.
|
|
This should not be enabled for anything other than the Japanese\-specific
|
|
PC\-98 architecture.
|
|
Default: auto\-detected.
|
|
.\" Doubt this should be documented.
|
|
.ig
|
|
.TP 7
|
|
.BI "Option \*qEstimateSizesAggressively\*q \*q" value \*q
|
|
This option affects the way that bus resource sizes are estimated.
|
|
Default: 0.
|
|
..
|
|
.TP 7
|
|
.BI "Option \*qNoPM\*q \*q" boolean \*q
|
|
Disables something to do with power management events.
|
|
Default: PM enabled on platforms that support it.
|
|
.TP 7
|
|
.BI "Option \*qXinerama\*q \*q" boolean \*q
|
|
enable or disable XINERAMA extension.
|
|
Default is disabled.
|
|
.TP 7
|
|
.BI "Option \*qHandleSpecialKeys\*q \*q" when \*q
|
|
This option controls when the server uses the builtin handler to process
|
|
special key combinations (such as
|
|
.BR Ctrl+Alt+Backspace ).
|
|
Normally the XKEYBOARD extension keymaps will provide mappings for each of
|
|
the special key combinations, so the builtin handler is not needed unless
|
|
the XKEYBOARD extension is disabled.
|
|
The value of
|
|
.I when
|
|
can be
|
|
.BR Always ,
|
|
.BR Never ,
|
|
or
|
|
.BR WhenNeeded .
|
|
Default: Use the builtin handler only if needed.
|
|
The server will scan the keymap for a mapping to the
|
|
.B Terminate
|
|
action and, if found, use XKEYBOARD for processing actions, otherwise
|
|
the builtin handler will be used.
|
|
.TP 7
|
|
.BI "Option \*qAIGLX\*q \*q" boolean \*q
|
|
enable or disable AIGLX. AIGLX is enabled by default.
|
|
.TP 7
|
|
.BI "Option \*qGlxVisuals\*q \*q" string \*q
|
|
This option controls how many GLX visuals the GLX modules sets up.
|
|
The default value is
|
|
.BR "typical" ,
|
|
which will setup up a typical subset of
|
|
the GLXFBConfigs provided by the driver as GLX visuals. Other options are
|
|
.BR "minimal" ,
|
|
which will set up the minimal set allowed by the GLX specification and
|
|
.BR "all"
|
|
which will setup GLX visuals for all GLXFBConfigs.
|
|
.TP 7
|
|
.BI "Option \*qUseDefaultFontPath\*q \*q" boolean \*q
|
|
Include the default font path even if other paths are specified in
|
|
xorg.conf. If enabled, other font paths are included as well. Enabled by
|
|
default.
|
|
.TP 7
|
|
.BI "Option \*qIgnoreABI\*q \*q" boolean \*q
|
|
Allow modules built for a different, potentially incompatible version of
|
|
the X server to load. Disabled by default.
|
|
.TP 7
|
|
.BI "Option \*qAllowEmptyInput\*q \*q" boolean \*q
|
|
If enabled, don't add the standard keyboard and mouse drivers, if there are no
|
|
input devices in the config file. Enabled by default if AutoAddDevices and
|
|
AutoEnableDevices is enabled, otherwise disabled.
|
|
If AllowEmptyInput is on, devices using the kbd, mouse or vmmouse driver are ignored.
|
|
.TP 7
|
|
.BI "Option \*qAutoAddDevices\*q \*q" boolean \*q
|
|
If this option is disabled, then no devices will be added from HAL events.
|
|
Enabled by default.
|
|
.TP 7
|
|
.BI "Option \*qAutoEnableDevices\*q \*q" boolean \*q
|
|
If this option is disabled, then the devices will be added (and the
|
|
DevicePresenceNotify event sent), but not enabled, thus leaving policy up
|
|
to the client.
|
|
Enabled by default.
|
|
.TP 7
|
|
.BI "Option \*qLog\*q \*q" string \*q
|
|
This option controls whether the log is flushed and/or synced to disk after
|
|
each message.
|
|
Possible values are
|
|
.B flush
|
|
or
|
|
.BR sync .
|
|
Unset by default.
|
|
.SH "MODULE SECTION"
|
|
The
|
|
.B Module
|
|
section is used to specify which __xservername__ server modules should be loaded.
|
|
This section is ignored when the __xservername__ server is built in static form.
|
|
The types of modules normally loaded in this section are __xservername__ server
|
|
extension modules, and font rasteriser modules.
|
|
Most other module types are loaded automatically when they are needed via
|
|
other mechanisms.
|
|
The
|
|
.B Module
|
|
section is optional, as are all of the entries that may be specified in
|
|
it.
|
|
.PP
|
|
Entries in this section may be in two forms.
|
|
The first and most commonly used form is an entry that uses the
|
|
.B Load
|
|
keyword, as described here:
|
|
.TP 7
|
|
.BI "Load \*q" modulename \*q
|
|
This instructs the server to load the module called
|
|
.IR modulename .
|
|
The module name given should be the module's standard name, not the
|
|
module file name.
|
|
The standard name is case\-sensitive, and does not include the \(lqlib\(rq
|
|
prefix, or the \(lq.a\(rq, \(lq.o\(rq, or \(lq.so\(rq suffixes.
|
|
.PP
|
|
.RS 7
|
|
Example: the FreeType font rasteriser can be loaded with the following entry:
|
|
.PP
|
|
.RS 4
|
|
.B "Load \*qfreetype\*q"
|
|
.RE
|
|
.RE
|
|
.TP 7
|
|
.BI "Disable \*q" modulename \*q
|
|
This instructs the server to not load the module called
|
|
.IR modulename .
|
|
Some modules are loaded by default in the server, and this overrides that
|
|
default. If a
|
|
.B Load
|
|
instruction is given for the same module, it overrides the
|
|
.B Disable
|
|
instruction and the module is loaded. The module name given should be the
|
|
module's standard name, not the module file name. As with the
|
|
.B Load
|
|
instruction, the standard name is case-sensitive, and does not include the
|
|
"lib" prefix, or the ".a", ".o", or ".so" suffixes.
|
|
.PP
|
|
The second form of entry is a
|
|
.BR SubSection,
|
|
with the subsection name being the module name, and the contents of the
|
|
.B SubSection
|
|
being
|
|
.B Options
|
|
that are passed to the module when it is loaded.
|
|
.PP
|
|
Example: the extmod module (which contains a miscellaneous group of
|
|
server extensions) can be loaded, with the XFree86\-DGA extension
|
|
disabled by using the following entry:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.B "SubSection \*qextmod\*q"
|
|
.B " Option \*qomit XFree86\-DGA\*q"
|
|
.B EndSubSection
|
|
.fi
|
|
.RE
|
|
.PP
|
|
Modules are searched for in each directory specified in the
|
|
.B ModulePath
|
|
search path, and in the drivers, input, extensions, fonts, and
|
|
internal subdirectories of each of those directories.
|
|
In addition to this, operating system specific subdirectories of all
|
|
the above are searched first if they exist.
|
|
.PP
|
|
To see what font and extension modules are available, check the contents
|
|
of the following directories:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
__projectroot__/lib/modules/fonts
|
|
__projectroot__/lib/modules/extensions
|
|
.fi
|
|
.RE
|
|
.PP
|
|
The \(lqextmod\(rq, \(lqdbe\(rq, \(lqglx\(rq, and \(lqdri\(rq extension
|
|
modules are loaded automatically, unless disabled with \*qDisable\*q entries.
|
|
It is recommended
|
|
that at very least the \(lqextmod\(rq extension module be loaded.
|
|
If it isn't, some commonly used server extensions (like the SHAPE
|
|
extension) will not be available.
|
|
.SH "EXTENSIONS SECTION"
|
|
The
|
|
.B Extensions
|
|
section is used to specify which X11 protocol extensions should be enabled
|
|
or disabled.
|
|
The
|
|
.B Extensions
|
|
section is optional, as are all of the entries that may be specified in
|
|
it.
|
|
.PP
|
|
Entries in this section are listed as Option statements with the name of
|
|
the extension as the first argument, and a boolean value as the second.
|
|
The extension name is case\-sensitive, and matches the form shown in the output
|
|
of \*qXorg -extension ?\*q.
|
|
.PP
|
|
.RS 7
|
|
Example: the MIT-SHM extension can be disabled with the following entry:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.B "Section \*qExtensions\*q"
|
|
.B " Option \*qMIT-SHM\*q \*qDisable\*q"
|
|
.B "EndSection"
|
|
.fi
|
|
.RE
|
|
.RE
|
|
.SH "INPUTDEVICE SECTION"
|
|
The config file may have multiple
|
|
.B InputDevice
|
|
sections.
|
|
There will normally be at least two: one for the core (primary) keyboard,
|
|
and one of the core pointer.
|
|
If either of these two is missing, a default configuration for the missing
|
|
ones will be used.
|
|
Currently the default configuration may not work as expected on all platforms.
|
|
.PP
|
|
.B InputDevice
|
|
sections have the following format:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.B "Section \*qInputDevice\*q"
|
|
.BI " Identifier \*q" name \*q
|
|
.BI " Driver \*q" inputdriver \*q
|
|
.I " options"
|
|
.I " ..."
|
|
.B "EndSection"
|
|
.fi
|
|
.RE
|
|
.PP
|
|
The
|
|
.B Identifier
|
|
and
|
|
.B Driver
|
|
entries are required in all
|
|
.B InputDevice
|
|
sections.
|
|
All other entries are optional.
|
|
.PP
|
|
The
|
|
.B Identifier
|
|
entry specifies the unique name for this input device.
|
|
The
|
|
.B Driver
|
|
entry specifies the name of the driver to use for this input device.
|
|
When using the loadable server, the input driver module
|
|
.RI \*q inputdriver \*q
|
|
will be loaded for each active
|
|
.B InputDevice
|
|
section.
|
|
An
|
|
.B InputDevice
|
|
section is considered active if it is referenced by an active
|
|
.B ServerLayout
|
|
section, if it is referenced by the
|
|
.B \-keyboard
|
|
or
|
|
.B \-pointer
|
|
command line options, or if it is selected implicitly as the core pointer
|
|
or keyboard device in the absence of such explicit references.
|
|
The most commonly used input drivers are
|
|
.BR evdev (__drivermansuffix__)
|
|
on Linux systems, and
|
|
.BR kbd (__drivermansuffix__)
|
|
and
|
|
.BR mouse (__drivermansuffix__)
|
|
on other platforms.
|
|
.PP
|
|
In the absence of an explicitly specified core input device, the first
|
|
.B InputDevice
|
|
marked as
|
|
.B CorePointer
|
|
(or
|
|
.BR CoreKeyboard )
|
|
is used.
|
|
If there is no match there, the first
|
|
.B InputDevice
|
|
that uses the \(lqmouse\(rq (or \(lqkbd\(rq) driver is used.
|
|
The final fallback is to use built\-in default configurations.
|
|
.PP
|
|
.B InputDevice
|
|
sections recognise some driver\-independent
|
|
.BR Options ,
|
|
which are described here.
|
|
See the individual input driver manual pages for a description of the
|
|
device\-specific options.
|
|
.TP 7
|
|
.BI "Option \*qCorePointer\*q"
|
|
When this is set, the input device is installed as the core (primary)
|
|
pointer device.
|
|
There must be exactly one core pointer.
|
|
If this option is not set here, or in the
|
|
.B ServerLayout
|
|
section, or from the
|
|
.B \-pointer
|
|
command line option, then the first input device that is capable of
|
|
being used as a core pointer will be selected as the core pointer.
|
|
This option is implicitly set when the obsolete
|
|
.B Pointer
|
|
section is used.
|
|
.TP 7
|
|
.BI "Option \*qCoreKeyboard\*q"
|
|
When this is set, the input device is to be installed as the core
|
|
(primary) keyboard device.
|
|
There must be exactly one core keyboard.
|
|
If this option is not set here, in the
|
|
.B ServerLayout
|
|
section, or from the
|
|
.B \-keyboard
|
|
command line option, then the first input device that is capable of
|
|
being used as a core keyboard will be selected as the core keyboard.
|
|
This option is implicitly set when the obsolete
|
|
.B Keyboard
|
|
section is used.
|
|
.TP 7
|
|
.BI "Option \*qAlwaysCore\*q \*q" boolean \*q
|
|
.TP 7
|
|
.BI "Option \*qSendCoreEvents\*q \*q" boolean \*q
|
|
Both of these options are equivalent, and when enabled cause the
|
|
input device to always report core events.
|
|
This can be used, for example, to allow an additional pointer device to
|
|
generate core pointer events (like moving the cursor, etc).
|
|
.TP 4
|
|
.BI "Option \*qHistorySize\*q \*q" number \*q
|
|
Sets the motion history size.
|
|
Default: 0.
|
|
.TP 7
|
|
.BI "Option \*qSendDragEvents\*q \*q" boolean \*q
|
|
???
|
|
.SH "DEVICE SECTION"
|
|
The config file may have multiple
|
|
.B Device
|
|
sections.
|
|
There must be at least one, for the video card being used.
|
|
.PP
|
|
.B Device
|
|
sections have the following format:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.B "Section \*qDevice\*q"
|
|
.BI " Identifier \*q" name \*q
|
|
.BI " Driver \*q" driver \*q
|
|
.I " entries"
|
|
.I " ..."
|
|
.B "EndSection"
|
|
.fi
|
|
.RE
|
|
.PP
|
|
The
|
|
.B Identifier
|
|
and
|
|
.B Driver
|
|
entries are required in all
|
|
.B Device
|
|
sections. All other entries are optional.
|
|
.PP
|
|
The
|
|
.B Identifier
|
|
entry specifies the unique name for this graphics device.
|
|
The
|
|
.B Driver
|
|
entry specifies the name of the driver to use for this graphics device.
|
|
When using the loadable server, the driver module
|
|
.RI \*q driver \*q
|
|
will be loaded for each active
|
|
.B Device
|
|
section.
|
|
A
|
|
.B Device
|
|
section is considered active if it is referenced by an active
|
|
.B Screen
|
|
section.
|
|
.PP
|
|
.B Device
|
|
sections recognise some driver\-independent entries and
|
|
.BR Options ,
|
|
which are described here.
|
|
Not all drivers make use of these
|
|
driver\-independent entries, and many of those that do don't require them
|
|
to be specified because the information is auto\-detected.
|
|
See the individual graphics driver manual pages for further information
|
|
about this, and for a description of the device\-specific options.
|
|
Note that most of the
|
|
.B Options
|
|
listed here (but not the other entries) may be specified in the
|
|
.B Screen
|
|
section instead of here in the
|
|
.B Device
|
|
section.
|
|
.TP 7
|
|
.BI "BusID \*q" bus\-id \*q
|
|
This specifies the bus location of the graphics card.
|
|
For PCI/AGP cards,
|
|
the
|
|
.I bus\-id
|
|
string has the form
|
|
.BI PCI: bus : device : function
|
|
(e.g., \(lqPCI:1:0:0\(rq might be appropriate for an AGP card).
|
|
This field is usually optional in single-head configurations when using
|
|
the primary graphics card.
|
|
In multi-head configurations, or when using a secondary graphics card in a
|
|
single-head configuration, this entry is mandatory.
|
|
Its main purpose is to make an unambiguous connection between the device
|
|
section and the hardware it is representing.
|
|
This information can usually be found by running the pciaccess tool
|
|
scanpci.
|
|
.TP 7
|
|
.BI "Screen " number
|
|
This option is mandatory for cards where a single PCI entity can drive more
|
|
than one display (i.e., multiple CRTCs sharing a single graphics accelerator
|
|
and video memory).
|
|
One
|
|
.B Device
|
|
section is required for each head, and this
|
|
parameter determines which head each of the
|
|
.B Device
|
|
sections applies to.
|
|
The legal values of
|
|
.I number
|
|
range from 0 to one less than the total number of heads per entity.
|
|
Most drivers require that the primary screen (0) be present.
|
|
.TP 7
|
|
.BI "Chipset \*q" chipset \*q
|
|
This usually optional entry specifies the chipset used on the graphics
|
|
board.
|
|
In most cases this entry is not required because the drivers will probe the
|
|
hardware to determine the chipset type.
|
|
Don't specify it unless the driver-specific documentation recommends that you
|
|
do.
|
|
.TP 7
|
|
.BI "Ramdac \*q" ramdac\-type \*q
|
|
This optional entry specifies the type of RAMDAC used on the graphics
|
|
board.
|
|
This is only used by a few of the drivers, and in most cases it is not
|
|
required because the drivers will probe the hardware to determine the
|
|
RAMDAC type where possible.
|
|
Don't specify it unless the driver-specific documentation recommends that you
|
|
do.
|
|
.TP 7
|
|
.BI "DacSpeed " speed
|
|
.TP 7
|
|
.BI "DacSpeed " "speed\-8 speed\-16 speed\-24 speed\-32"
|
|
This optional entry specifies the RAMDAC speed rating (which is usually
|
|
printed on the RAMDAC chip).
|
|
The speed is in MHz.
|
|
When one value is given, it applies to all framebuffer pixel sizes.
|
|
When multiple values are given, they apply to the framebuffer pixel sizes
|
|
8, 16, 24 and 32 respectively.
|
|
This is not used by many drivers, and only needs to be specified when the
|
|
speed rating of the RAMDAC is different from the defaults built in to
|
|
driver, or when the driver can't auto-detect the correct defaults.
|
|
Don't specify it unless the driver-specific documentation recommends that you
|
|
do.
|
|
.TP 7
|
|
.BI "Clocks " "clock ..."
|
|
specifies the pixel that are on your graphics board.
|
|
The clocks are in MHz, and may be specified as a floating point number.
|
|
The value is stored internally to the nearest kHz.
|
|
The ordering of the clocks is important.
|
|
It must match the order in which they are selected on the graphics board.
|
|
Multiple
|
|
.B Clocks
|
|
lines may be specified, and each is concatenated to form the list.
|
|
Most drivers do not use this entry, and it is only required for some older
|
|
boards with non-programmable clocks.
|
|
Don't specify this entry unless the driver-specific documentation explicitly
|
|
recommends that you do.
|
|
.TP
|
|
.BI "ClockChip \*q" clockchip\-type \*q
|
|
This optional entry is used to specify the clock chip type on graphics
|
|
boards which have a programmable clock generator.
|
|
Only a few __xservername__ drivers support programmable clock chips.
|
|
For details, see the appropriate driver manual page.
|
|
.TP 7
|
|
.BI "VideoRam " "mem"
|
|
This optional entry specifies the amount of video ram that is installed
|
|
on the graphics board.
|
|
This is measured in kBytes.
|
|
In most cases this is not required because the __xservername__ server probes
|
|
the graphics board to determine this quantity.
|
|
The driver-specific documentation should indicate when it might be needed.
|
|
.TP 7
|
|
.BI "BiosBase " "baseaddress"
|
|
This optional entry specifies the base address of the video BIOS for
|
|
the VGA board.
|
|
This address is normally auto-detected, and should only be specified if the
|
|
driver-specific documentation recommends it.
|
|
.TP 7
|
|
.BI "MemBase " "baseaddress"
|
|
This optional entry specifies the memory base address of a graphics
|
|
board's linear frame buffer.
|
|
This entry is not used by many drivers, and it should only be specified if
|
|
the driver-specific documentation recommends it.
|
|
.TP 7
|
|
.BI "IOBase " "baseaddress"
|
|
This optional entry specifies the IO base address.
|
|
This entry is not used by many drivers, and it should only be specified if
|
|
the driver-specific documentation recommends it.
|
|
.TP 7
|
|
.BI "ChipID " "id"
|
|
This optional entry specifies a numerical ID representing the chip type.
|
|
For PCI cards, it is usually the device ID.
|
|
This can be used to override the auto-detection, but that should only be done
|
|
when the driver-specific documentation recommends it.
|
|
.TP 7
|
|
.BI "ChipRev " "rev"
|
|
This optional entry specifies the chip revision number.
|
|
This can be used to override the auto-detection, but that should only be done
|
|
when the driver-specific documentation recommends it.
|
|
.TP 7
|
|
.BI "TextClockFreq " "freq"
|
|
This optional entry specifies the pixel clock frequency that is used
|
|
for the regular text mode.
|
|
The frequency is specified in MHz.
|
|
This is rarely used.
|
|
.TP 7
|
|
.BI "Option \*qModeDebug\*q \*q" boolean \*q
|
|
Enable printing of additional debugging information about modesetting to
|
|
the server log.
|
|
.ig
|
|
.TP 7
|
|
This optional entry allows an IRQ number to be specified.
|
|
..
|
|
.TP 7
|
|
.B Options
|
|
Option flags may be specified in the
|
|
.B Device
|
|
sections.
|
|
These include driver\-specific options and driver\-independent options.
|
|
The former are described in the driver\-specific documentation.
|
|
Some of the latter are described below in the section about the
|
|
.B Screen
|
|
section, and they may also be included here.
|
|
|
|
.SH "VIDEOADAPTOR SECTION"
|
|
Nobody wants to say how this works.
|
|
Maybe nobody knows ...
|
|
|
|
.SH "MONITOR SECTION"
|
|
The config file may have multiple
|
|
.B Monitor
|
|
sections.
|
|
There should normally be at least one, for the monitor being used,
|
|
but a default configuration will be created when one isn't specified.
|
|
.PP
|
|
.B Monitor
|
|
sections have the following format:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.B "Section \*qMonitor\*q"
|
|
.BI " Identifier \*q" name \*q
|
|
.I " entries"
|
|
.I " ..."
|
|
.B "EndSection"
|
|
.fi
|
|
.RE
|
|
.PP
|
|
The only mandatory entry in a
|
|
.B Monitor
|
|
section is the
|
|
.B Identifier
|
|
entry.
|
|
.PP
|
|
The
|
|
.B Identifier
|
|
entry specifies the unique name for this monitor.
|
|
The
|
|
.B Monitor
|
|
section may be used to provide information about the specifications of the
|
|
monitor, monitor-specific
|
|
.BR Options ,
|
|
and information about the video modes to use with the monitor.
|
|
.PP
|
|
With RandR 1.2-enabled drivers, monitor sections may be tied to specific
|
|
outputs of the video card. Using the name of the output defined by the video
|
|
driver plus the identifier of a monitor section, one associates a monitor
|
|
section with an output by adding an option to the Device section in the
|
|
following format:
|
|
|
|
.B Option \*qMonitor-outputname\*q \*qmonitorsection\*q
|
|
|
|
(for example,
|
|
.B Option \*qMonitor-VGA\*q \*qVGA monitor\*q
|
|
for a VGA output)
|
|
.PP
|
|
In the absence of specific association of monitor sections to outputs, if a
|
|
monitor section is present the server will associate it with an output to
|
|
preserve compatibility for previous single-head configurations.
|
|
.PP
|
|
Specifying video modes is optional because the server will use the DDC or other
|
|
information provided by the monitor to automatically configure the list of
|
|
modes available.
|
|
When modes are specified explicitly in the
|
|
.B Monitor
|
|
section (with the
|
|
.BR Modes ,
|
|
.BR ModeLine ,
|
|
or
|
|
.B UseModes
|
|
keywords), built-in modes with the same names are not included.
|
|
Built-in modes with different names are, however, still implicitly included,
|
|
when they meet the requirements of the monitor.
|
|
.PP
|
|
The entries that may be used in
|
|
.B Monitor
|
|
sections are described below.
|
|
.TP 7
|
|
.BI "VendorName \*q" vendor \*q
|
|
This optional entry specifies the monitor's manufacturer.
|
|
.TP 7
|
|
.BI "ModelName \*q" model \*q
|
|
This optional entry specifies the monitor's model.
|
|
.TP 7
|
|
.BI "HorizSync " "horizsync\-range"
|
|
gives the range(s) of horizontal sync frequencies supported by the
|
|
monitor.
|
|
.I horizsync\-range
|
|
may be a comma separated list of either discrete values or ranges of
|
|
values.
|
|
A range of values is two values separated by a dash.
|
|
By default the values are in units of kHz.
|
|
They may be specified in MHz or Hz
|
|
if
|
|
.B MHz
|
|
or
|
|
.B Hz
|
|
is added to the end of the line.
|
|
The data given here is used by the __xservername__ server to determine if video
|
|
modes are within the specifications of the monitor.
|
|
This information should be available in the monitor's handbook.
|
|
If this entry is omitted, a default range of 28\-33kHz is used.
|
|
.TP 7
|
|
.BI "VertRefresh " "vertrefresh\-range"
|
|
gives the range(s) of vertical refresh frequencies supported by the
|
|
monitor.
|
|
.I vertrefresh\-range
|
|
may be a comma separated list of either discrete values or ranges of
|
|
values.
|
|
A range of values is two values separated by a dash.
|
|
By default the values are in units of Hz.
|
|
They may be specified in MHz or kHz
|
|
if
|
|
.B MHz
|
|
or
|
|
.B kHz
|
|
is added to the end of the line.
|
|
The data given here is used by the __xservername__ server to determine if video
|
|
modes are within the specifications of the monitor.
|
|
This information should be available in the monitor's handbook.
|
|
If this entry is omitted, a default range of 43\-72Hz is used.
|
|
.TP 7
|
|
.BI "DisplaySize " "width height"
|
|
This optional entry gives the width and height, in millimetres, of the
|
|
picture area of the monitor.
|
|
If given this is used to calculate the horizontal and vertical pitch (DPI) of
|
|
the screen.
|
|
.TP 7
|
|
.BI "Gamma " "gamma\-value"
|
|
.TP 7
|
|
.BI "Gamma " "red\-gamma green\-gamma blue\-gamma"
|
|
This is an optional entry that can be used to specify the gamma correction
|
|
for the monitor.
|
|
It may be specified as either a single value or as three separate RGB values.
|
|
The values should be in the range 0.1 to 10.0, and the default is 1.0.
|
|
Not all drivers are capable of using this information.
|
|
.TP 7
|
|
.BI "UseModes \*q" modesection\-id \*q
|
|
Include the set of modes listed in the
|
|
.B Modes
|
|
section called
|
|
.IR modesection\-id.
|
|
This makes all of the modes defined in that section available for use by
|
|
this monitor.
|
|
.TP 7
|
|
.BI "Mode \*q" name \*q
|
|
This is an optional multi-line entry that can be used to provide
|
|
definitions for video modes for the monitor.
|
|
In most cases this isn't necessary because the built-in set of VESA standard
|
|
modes will be sufficient.
|
|
The
|
|
.B Mode
|
|
keyword indicates the start of a multi-line video mode description.
|
|
The mode description is terminated with the
|
|
.B EndMode
|
|
keyword.
|
|
The mode description consists of the following entries:
|
|
.RS 7
|
|
.TP 4
|
|
.BI "DotClock " clock
|
|
is the dot (pixel) clock rate to be used for the mode.
|
|
.TP 4
|
|
.BI "HTimings " "hdisp hsyncstart hsyncend htotal"
|
|
specifies the horizontal timings for the mode.
|
|
.TP 4
|
|
.BI "VTimings " "vdisp vsyncstart vsyncend vtotal"
|
|
specifies the vertical timings for the mode.
|
|
.TP 4
|
|
.BI "Flags \*q" flag \*q " ..."
|
|
specifies an optional set of mode flags, each of which is a separate
|
|
string in double quotes.
|
|
.B \*qInterlace\*q
|
|
indicates that the mode is interlaced.
|
|
.B \*qDoubleScan\*q
|
|
indicates a mode where each scanline is doubled.
|
|
.B \*q+HSync\*q
|
|
and
|
|
.B \*q\-HSync\*q
|
|
can be used to select the polarity of the HSync signal.
|
|
.B \*q+VSync\*q
|
|
and
|
|
.B \*q\-VSync\*q
|
|
can be used to select the polarity of the VSync signal.
|
|
.B \*qComposite\*q
|
|
can be used to specify composite sync on hardware where this is supported.
|
|
Additionally, on some hardware,
|
|
.B \*q+CSync\*q
|
|
and
|
|
.B \*q\-CSync\*q
|
|
may be used to select the composite sync polarity.
|
|
.TP 4
|
|
.BI "HSkew " hskew
|
|
specifies the number of pixels (towards the right edge of the screen) by
|
|
which the display enable signal is to be skewed.
|
|
Not all drivers use this information.
|
|
This option might become necessary to override the default value supplied
|
|
by the server (if any).
|
|
\(lqRoving\(rq horizontal lines indicate this value needs to be increased.
|
|
If the last few pixels on a scan line appear on the left of the screen,
|
|
this value should be decreased.
|
|
.TP 4
|
|
.BI "VScan " vscan
|
|
specifies the number of times each scanline is painted on the screen.
|
|
Not all drivers use this information.
|
|
Values less than 1 are treated as 1, which is the default.
|
|
Generally, the
|
|
.B \*qDoubleScan\*q
|
|
.B Flag
|
|
mentioned above doubles this value.
|
|
.RE
|
|
.TP 7
|
|
.BI "ModeLine \*q" name \*q " mode\-description"
|
|
This entry is a more compact version of the
|
|
.B Mode
|
|
entry, and it also can be used to specify video modes for the monitor.
|
|
is a single line format for specifying video modes.
|
|
In most cases this isn't necessary because the built\-in set of VESA
|
|
standard modes will be sufficient.
|
|
.PP
|
|
.RS 7
|
|
The
|
|
.I mode\-description
|
|
is in four sections, the first three of which are mandatory.
|
|
The first is the dot (pixel) clock.
|
|
This is a single number specifying the pixel clock rate for the mode in
|
|
MHz.
|
|
The second section is a list of four numbers specifying the horizontal
|
|
timings.
|
|
These numbers are the
|
|
.IR hdisp ,
|
|
.IR hsyncstart ,
|
|
.IR hsyncend ,
|
|
and
|
|
.I htotal
|
|
values.
|
|
The third section is a list of four numbers specifying the vertical
|
|
timings.
|
|
These numbers are the
|
|
.IR vdisp ,
|
|
.IR vsyncstart ,
|
|
.IR vsyncend ,
|
|
and
|
|
.I vtotal
|
|
values.
|
|
The final section is a list of flags specifying other characteristics of
|
|
the mode.
|
|
.B Interlace
|
|
indicates that the mode is interlaced.
|
|
.B DoubleScan
|
|
indicates a mode where each scanline is doubled.
|
|
.B +HSync
|
|
and
|
|
.B \-HSync
|
|
can be used to select the polarity of the HSync signal.
|
|
.B +VSync
|
|
and
|
|
.B \-VSync
|
|
can be used to select the polarity of the VSync signal.
|
|
.B Composite
|
|
can be used to specify composite sync on hardware where this is supported.
|
|
Additionally, on some hardware,
|
|
.B +CSync
|
|
and
|
|
.B \-CSync
|
|
may be used to select the composite sync polarity.
|
|
The
|
|
.B HSkew
|
|
and
|
|
.B VScan
|
|
options mentioned above in the
|
|
.B Modes
|
|
entry description can also be used here.
|
|
.RE
|
|
.TP 7
|
|
.BI "Option " "\*qDPMS\*q " \*qbool\*q
|
|
This option controls whether the server should enable the DPMS extension
|
|
for power management for this screen. The default is to enable the
|
|
extension.
|
|
.TP 7
|
|
.BI "Option " "\*qSyncOnGreen\*q " \*qbool\*q
|
|
This option controls whether the video card should drive the sync signal
|
|
on the green color pin. Not all cards support this option, and most
|
|
monitors do not require it. The default is off.
|
|
.TP 7
|
|
.BI "Option " "\*qTargetRefresh\*q " \*qrate\*q
|
|
This optional entry specifies the vertical refresh rate that the server
|
|
should aim for when selecting video modes. Without this option, the
|
|
default is to prefer modes with higher refresh rates.
|
|
.TP 7
|
|
.BI "Option " "\*qPreferredMode\*q " \*qstring\*q
|
|
This optional entry specifies a mode to be marked as the preferred initial mode
|
|
of the monitor.
|
|
(RandR 1.2-supporting drivers only)
|
|
.TP 7
|
|
.BI "Option " "\*qPosition\*q " "\*qx y\*q"
|
|
This optional entry specifies the position of the monitor within the X
|
|
screen.
|
|
(RandR 1.2-supporting drivers only)
|
|
.TP 7
|
|
.BI "Option " "\*qLeftOf\*q " \*qoutput\*q
|
|
This optional entry specifies that the monitor should be positioned to the
|
|
left of the output (not monitor) of the given name.
|
|
(RandR 1.2-supporting drivers only)
|
|
.TP 7
|
|
.BI "Option " "\*qRightOf\*q " \*qoutput\*q
|
|
This optional entry specifies that the monitor should be positioned to the
|
|
right of the output (not monitor) of the given name.
|
|
(RandR 1.2-supporting drivers only)
|
|
.TP 7
|
|
.BI "Option " "\*qAbove\*q " \*qoutput\*q
|
|
This optional entry specifies that the monitor should be positioned above the
|
|
output (not monitor) of the given name.
|
|
(RandR 1.2-supporting drivers only)
|
|
.TP 7
|
|
.BI "Option " "\*qBelow\*q " \*qoutput\*q
|
|
This optional entry specifies that the monitor should be positioned below the
|
|
output (not monitor) of the given name.
|
|
(RandR 1.2-supporting drivers only)
|
|
.TP 7
|
|
.BI "Option " "\*qEnable\*q " \*qbool\*q
|
|
This optional entry specifies whether the monitor should be turned on
|
|
at startup. By default, the server will attempt to enable all connected
|
|
monitors.
|
|
(RandR 1.2-supporting drivers only)
|
|
.TP 7
|
|
.BI "Option " "\*qMinClock\*q " \*qfrequency\*q
|
|
This optional entry specifies the minimum dot clock, in kHz, that is supported
|
|
by the monitor.
|
|
.TP 7
|
|
.BI "Option " "\*qMaxClock\*q " \*qfrequency\*q
|
|
This optional entry specifies the maximum dot clock, in kHz, that is supported
|
|
by the monitor.
|
|
.TP 7
|
|
.BI "Option " "\*qIgnore\*q " \*qbool\*q
|
|
This optional entry specifies that the monitor should be ignored entirely,
|
|
and not reported through RandR. This is useful if the hardware reports the
|
|
presence of outputs that don't exist.
|
|
(RandR 1.2-supporting drivers only)
|
|
.TP 7
|
|
.BI "Option " "\*qRotate\*q " \*qrotation\*q
|
|
This optional entry specifies the initial rotation of the given monitor.
|
|
Valid values for rotation are \*qnormal\*q, \*qleft\*q, \*qright\*q, and
|
|
\*qinverted\*q.
|
|
(RandR 1.2-supporting drivers only)
|
|
|
|
.SH "MODES SECTION"
|
|
The config file may have multiple
|
|
.B Modes
|
|
sections, or none.
|
|
These sections provide a way of defining sets of video modes independently
|
|
of the
|
|
.B Monitor
|
|
sections.
|
|
.B Monitor
|
|
sections may include the definitions provided in these sections by
|
|
using the
|
|
.B UseModes
|
|
keyword.
|
|
In most cases the
|
|
.B Modes
|
|
sections are not necessary because the built\-in set of VESA standard modes
|
|
will be sufficient.
|
|
.PP
|
|
.B Modes
|
|
sections have the following format:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.B "Section \*qModes\*q"
|
|
.BI " Identifier \*q" name \*q
|
|
.I " entries"
|
|
.I " ..."
|
|
.B "EndSection"
|
|
.fi
|
|
.RE
|
|
.PP
|
|
The
|
|
.B Identifier
|
|
entry specifies the unique name for this set of mode descriptions.
|
|
The other entries permitted in
|
|
.B Modes
|
|
sections are the
|
|
.B Mode
|
|
and
|
|
.B ModeLine
|
|
entries that are described above in the
|
|
.B Monitor
|
|
section.
|
|
.SH "SCREEN SECTION"
|
|
The config file may have multiple
|
|
.B Screen
|
|
sections.
|
|
There must be at least one, for the \(lqscreen\(rq being used.
|
|
A \(lqscreen\(rq represents the binding of a graphics device
|
|
.RB ( Device
|
|
section) and a monitor
|
|
.RB ( Monitor
|
|
section).
|
|
A
|
|
.B Screen
|
|
section is considered \(lqactive\(rq if it is referenced by an active
|
|
.B ServerLayout
|
|
section or by the
|
|
.B \-screen
|
|
command line option.
|
|
If neither of those is present, the first
|
|
.B Screen
|
|
section found in the config file is considered the active one.
|
|
.PP
|
|
.B Screen
|
|
sections have the following format:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.B "Section \*qScreen\*q"
|
|
.BI " Identifier \*q" name \*q
|
|
.BI " Device \*q" devid \*q
|
|
.BI " Monitor \*q" monid \*q
|
|
.I " entries"
|
|
.I " ..."
|
|
.BI " SubSection \*qDisplay\*q"
|
|
.I " entries"
|
|
.I " ...
|
|
.B " EndSubSection"
|
|
.I " ..."
|
|
.B "EndSection"
|
|
.fi
|
|
.RE
|
|
.PP
|
|
The
|
|
.B Identifier
|
|
and
|
|
.B Device
|
|
entries are mandatory.
|
|
All others are optional.
|
|
.PP
|
|
The
|
|
.B Identifier
|
|
entry specifies the unique name for this screen.
|
|
The
|
|
.B Screen
|
|
section provides information specific to the whole screen, including
|
|
screen\-specific
|
|
.BR Options .
|
|
In multi\-head configurations, there will be multiple active
|
|
.B Screen
|
|
sections, one for each head.
|
|
The entries available
|
|
for this section are:
|
|
.TP 7
|
|
.BI "Device \*q" device\-id \*q
|
|
This mandatory entry specifies the
|
|
.B Device
|
|
section to be used for this screen.
|
|
This is what ties a specific graphics card to a screen.
|
|
The
|
|
.I device\-id
|
|
must match the
|
|
.B Identifier
|
|
of a
|
|
.B Device
|
|
section in the config file.
|
|
.TP 7
|
|
.BI "Monitor \*q" monitor\-id \*q
|
|
specifies which monitor description is to be used for this screen.
|
|
If a
|
|
.B Monitor
|
|
name is not specified, a default configuration is used.
|
|
Currently the default configuration may not function as expected on all
|
|
platforms.
|
|
.TP 7
|
|
.BI "VideoAdaptor \*q" xv\-id \*q
|
|
specifies an optional Xv video adaptor description to be used with this
|
|
screen.
|
|
.TP 7
|
|
.BI "DefaultDepth " depth
|
|
specifies which color depth the server should use by default.
|
|
The
|
|
.B \-depth
|
|
command line option can be used to override this.
|
|
If neither is specified, the default depth is driver\-specific, but in most
|
|
cases is 8.
|
|
.TP 7
|
|
.BI "DefaultFbBpp " bpp
|
|
specifies which framebuffer layout to use by default.
|
|
The
|
|
.B \-fbbpp
|
|
command line option can be used to override this.
|
|
In most cases the driver will chose the best default value for this.
|
|
The only case where there is even a choice in this value is for depth 24,
|
|
where some hardware supports both a packed 24 bit framebuffer layout and a
|
|
sparse 32 bit framebuffer layout.
|
|
.TP 7
|
|
.B Options
|
|
Various
|
|
.B Option
|
|
flags may be specified in the
|
|
.B Screen
|
|
section.
|
|
Some are driver\-specific and are described in the driver documentation.
|
|
Others are driver\-independent, and will eventually be described here.
|
|
.\" XXX These should really be in an xaa man page.
|
|
.TP 7
|
|
.BI "Option \*qAccel\*q"
|
|
Enables XAA (X Acceleration Architecture), a mechanism that makes video cards'
|
|
2D hardware acceleration available to the __xservername__ server.
|
|
This option is on by default, but it may be necessary to turn it off if
|
|
there are bugs in the driver.
|
|
There are many options to disable specific accelerated operations, listed
|
|
below.
|
|
Note that disabling an operation will have no effect if the operation is
|
|
not accelerated (whether due to lack of support in the hardware or in the
|
|
driver).
|
|
.TP 7
|
|
.BI "Option \*qInitPrimary\*q \*q" boolean \*q
|
|
Use the Int10 module to initialize the primary graphics card.
|
|
Normally, only secondary cards are soft-booted using the Int10 module, as the
|
|
primary card has already been initialized by the BIOS at boot time.
|
|
Default: false.
|
|
.TP 7
|
|
.BI "Option \*qNoInt10\*q \*q" boolean \*q
|
|
Disables the Int10 module, a module that uses the int10 call to the BIOS
|
|
of the graphics card to initialize it.
|
|
Default: false.
|
|
.TP 7
|
|
.BI "Option \*qNoMTRR\*q"
|
|
Disables MTRR (Memory Type Range Register) support, a feature of modern
|
|
processors which can improve video performance by a factor of up to 2.5.
|
|
Some hardware has buggy MTRR support, and some video drivers have been
|
|
known to exhibit problems when MTRR's are used.
|
|
.TP 7
|
|
.BI "Option \*qXaaNoCPUToScreenColorExpandFill\*q"
|
|
Disables accelerated rectangular expansion blits from source patterns
|
|
stored in system memory (using a memory\-mapped aperture).
|
|
.TP 7
|
|
.BI "Option \*qXaaNoColor8x8PatternFillRect\*q"
|
|
Disables accelerated fills of a rectangular region with a full\-color
|
|
pattern.
|
|
.TP 7
|
|
.BI "Option \*qXaaNoColor8x8PatternFillTrap\*q"
|
|
Disables accelerated fills of a trapezoidal region with a full\-color
|
|
pattern.
|
|
.TP 7
|
|
.BI "Option \*qXaaNoDashedBresenhamLine\*q"
|
|
Disables accelerated dashed Bresenham line draws.
|
|
.TP 7
|
|
.BI "Option \*qXaaNoDashedTwoPointLine\*q"
|
|
Disables accelerated dashed line draws between two arbitrary points.
|
|
.TP 7
|
|
.BI "Option \*qXaaNoImageWriteRect\*q"
|
|
Disables accelerated transfers of full\-color rectangular patterns from
|
|
system memory to video memory (using a memory\-mapped aperture).
|
|
.TP 7
|
|
.BI "Option \*qXaaNoMono8x8PatternFillRect\*q"
|
|
Disables accelerated fills of a rectangular region with a monochrome
|
|
pattern.
|
|
.TP 7
|
|
.BI "Option \*qXaaNoMono8x8PatternFillTrap\*q"
|
|
Disables accelerated fills of a trapezoidal region with a monochrome
|
|
pattern.
|
|
.TP 7
|
|
.BI "Option \*qXaaNoOffscreenPixmaps\*q"
|
|
Disables accelerated draws into pixmaps stored in offscreen video memory.
|
|
.TP 7
|
|
.BI "Option \*qXaaNoPixmapCache\*q"
|
|
Disables caching of patterns in offscreen video memory.
|
|
.TP 7
|
|
.BI "Option \*qXaaNoScanlineCPUToScreenColorExpandFill\*q"
|
|
Disables accelerated rectangular expansion blits from source patterns
|
|
stored in system memory (one scan line at a time).
|
|
.TP 7
|
|
.BI "Option \*qXaaNoScanlineImageWriteRect\*q"
|
|
Disables accelerated transfers of full\-color rectangular patterns from
|
|
system memory to video memory (one scan line at a time).
|
|
.TP 7
|
|
.BI "Option \*qXaaNoScreenToScreenColorExpandFill\*q"
|
|
Disables accelerated rectangular expansion blits from source patterns
|
|
stored in offscreen video memory.
|
|
.TP 7
|
|
.BI "Option \*qXaaNoScreenToScreenCopy\*q"
|
|
Disables accelerated copies of rectangular regions from one part of
|
|
video memory to another part of video memory.
|
|
.TP 7
|
|
.BI "Option \*qXaaNoSolidBresenhamLine\*q"
|
|
Disables accelerated solid Bresenham line draws.
|
|
.TP 7
|
|
.BI "Option \*qXaaNoSolidFillRect\*q"
|
|
Disables accelerated solid\-color fills of rectangles.
|
|
.TP 7
|
|
.BI "Option \*qXaaNoSolidFillTrap\*q"
|
|
Disables accelerated solid\-color fills of Bresenham trapezoids.
|
|
.TP 7
|
|
.BI "Option \*qXaaNoSolidHorVertLine\*q"
|
|
Disables accelerated solid horizontal and vertical line draws.
|
|
.TP 7
|
|
.BI "Option \*qXaaNoSolidTwoPointLine\*q"
|
|
Disables accelerated solid line draws between two arbitrary points.
|
|
.PP
|
|
Each
|
|
.B Screen
|
|
section may optionally contain one or more
|
|
.B Display
|
|
subsections.
|
|
Those subsections provide depth/fbbpp specific configuration information,
|
|
and the one chosen depends on the depth and/or fbbpp that is being used for
|
|
the screen.
|
|
The
|
|
.B Display
|
|
subsection format is described in the section below.
|
|
|
|
.SH "DISPLAY SUBSECTION"
|
|
Each
|
|
.B Screen
|
|
section may have multiple
|
|
.B Display
|
|
subsections.
|
|
The \(lqactive\(rq
|
|
.B Display
|
|
subsection is the first that matches the depth and/or fbbpp values being
|
|
used, or failing that, the first that has neither a depth or fbbpp value
|
|
specified.
|
|
The
|
|
.B Display
|
|
subsections are optional.
|
|
When there isn't one that matches the depth and/or fbbpp values being used,
|
|
all the parameters that can be specified here fall back to their defaults.
|
|
.PP
|
|
.B Display
|
|
subsections have the following format:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.B " SubSection \*qDisplay\*q"
|
|
.BI " Depth " depth
|
|
.I " entries"
|
|
.I " ..."
|
|
.B " EndSubSection"
|
|
.fi
|
|
.RE
|
|
.TP 7
|
|
.BI "Depth " depth
|
|
This entry specifies what colour depth the
|
|
.B Display
|
|
subsection is to be used for.
|
|
This entry is usually specified, but it may be omitted to create a match\-all
|
|
.B Display
|
|
subsection or when wishing to match only against the
|
|
.B FbBpp
|
|
parameter.
|
|
The range of
|
|
.I depth
|
|
values that are allowed depends on the driver.
|
|
Most drivers support 8, 15, 16 and 24.
|
|
Some also support 1 and/or 4, and some may support other values (like 30).
|
|
Note:
|
|
.I depth
|
|
means the number of bits in a pixel that are actually used to determine
|
|
the pixel colour.
|
|
32 is not a valid
|
|
.I depth
|
|
value.
|
|
Most hardware that uses 32 bits per pixel only uses 24 of them to hold the
|
|
colour information, which means that the colour depth is 24, not 32.
|
|
.TP 7
|
|
.BI "FbBpp " bpp
|
|
This entry specifies the framebuffer format this
|
|
.B Display
|
|
subsection is to be used for.
|
|
This entry is only needed when providing depth 24 configurations that allow
|
|
a choice between a 24 bpp packed framebuffer format and a 32bpp sparse
|
|
framebuffer format.
|
|
In most cases this entry should not be used.
|
|
.TP 7
|
|
.BI "Weight " "red\-weight green\-weight blue\-weight"
|
|
This optional entry specifies the relative RGB weighting to be used
|
|
for a screen is being used at depth 16 for drivers that allow multiple
|
|
formats.
|
|
This may also be specified from the command line with the
|
|
.B \-weight
|
|
option (see
|
|
.BR __xservername__(__appmansuffix__)).
|
|
.TP 7
|
|
.BI "Virtual " "xdim ydim"
|
|
This optional entry specifies the virtual screen resolution to be used.
|
|
.I xdim
|
|
must be a multiple of either 8 or 16 for most drivers, and a multiple
|
|
of 32 when running in monochrome mode.
|
|
The given value will be rounded down if this is not the case.
|
|
Video modes which are too large for the specified virtual size will be
|
|
rejected.
|
|
If this entry is not present, the virtual screen resolution will be set to
|
|
accommodate all the valid video modes given in the
|
|
.B Modes
|
|
entry.
|
|
Some drivers/hardware combinations do not support virtual screens.
|
|
Refer to the appropriate driver\-specific documentation for details.
|
|
.TP 7
|
|
.BI "ViewPort " "x0 y0"
|
|
This optional entry sets the upper left corner of the initial display.
|
|
This is only relevant when the virtual screen resolution is different
|
|
from the resolution of the initial video mode.
|
|
If this entry is not given, then the initial display will be centered in
|
|
the virtual display area.
|
|
.TP 7
|
|
.BI "Modes \*q" mode\-name \*q " ..."
|
|
This optional entry specifies the list of video modes to use.
|
|
Each
|
|
.I mode\-name
|
|
specified must be in double quotes.
|
|
They must correspond to those specified or referenced in the appropriate
|
|
.B Monitor
|
|
section (including implicitly referenced built\-in VESA standard modes).
|
|
The server will delete modes from this list which don't satisfy various
|
|
requirements.
|
|
The first valid mode in this list will be the default display mode for
|
|
startup.
|
|
The list of valid modes is converted internally into a circular list.
|
|
It is possible to switch to the next mode with
|
|
.B Ctrl+Alt+Keypad\-Plus
|
|
and to the previous mode with
|
|
.BR Ctrl+Alt+Keypad\-Minus .
|
|
When this entry is omitted, the valid modes referenced by the appropriate
|
|
.B Monitor
|
|
section will be used. If the
|
|
.B Monitor
|
|
section contains no modes, then the selection will be taken from the
|
|
built-in VESA standard modes.
|
|
.TP 7
|
|
.BI "Visual \*q" visual\-name \*q
|
|
This optional entry sets the default root visual type.
|
|
This may also be specified from the command line (see the
|
|
.BR Xserver(__appmansuffix__)
|
|
man page).
|
|
The visual types available for depth 8 are (default is
|
|
.BR PseudoColor ):
|
|
.PP
|
|
.RS 11
|
|
.nf
|
|
.B StaticGray
|
|
.B GrayScale
|
|
.B StaticColor
|
|
.B PseudoColor
|
|
.B TrueColor
|
|
.B DirectColor
|
|
.fi
|
|
.RE
|
|
.PP
|
|
.RS 7
|
|
The visual type available for the depths 15, 16 and 24 are (default is
|
|
.BR TrueColor ):
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.B TrueColor
|
|
.B DirectColor
|
|
.fi
|
|
.RE
|
|
.PP
|
|
Not all drivers support
|
|
.B DirectColor
|
|
at these depths.
|
|
.PP
|
|
The visual types available for the depth 4 are (default is
|
|
.BR StaticColor ):
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.B StaticGray
|
|
.B GrayScale
|
|
.B StaticColor
|
|
.B PseudoColor
|
|
.fi
|
|
.RE
|
|
.PP
|
|
The visual type available for the depth 1 (monochrome) is
|
|
.BR StaticGray .
|
|
.RE
|
|
.TP 7
|
|
.BI "Black " "red green blue"
|
|
This optional entry allows the \(lqblack\(rq colour to be specified.
|
|
This is only supported at depth 1.
|
|
The default is black.
|
|
.TP 7
|
|
.BI "White " "red green blue"
|
|
This optional entry allows the \(lqwhite\(rq colour to be specified.
|
|
This is only supported at depth 1.
|
|
The default is white.
|
|
.TP 7
|
|
.B Options
|
|
Option flags may be specified in the
|
|
.B Display
|
|
subsections.
|
|
These may include driver\-specific options and driver\-independent options.
|
|
The former are described in the driver\-specific documentation.
|
|
Some of the latter are described above in the section about the
|
|
.B Screen
|
|
section, and they may also be included here.
|
|
.SH "SERVERLAYOUT SECTION"
|
|
The config file may have multiple
|
|
.B ServerLayout
|
|
sections.
|
|
A \(lqserver layout\(rq represents the binding of one or more screens
|
|
.RB ( Screen
|
|
sections) and one or more input devices
|
|
.RB ( InputDevice
|
|
sections) to form a complete configuration.
|
|
In multi\-head configurations, it also specifies the relative layout of the
|
|
heads.
|
|
A
|
|
.B ServerLayout
|
|
section is considered \(lqactive\(rq if it is referenced by the
|
|
.B \-layout
|
|
command line option or by an
|
|
.B "Option \*qDefaultServerLayout\*q"
|
|
entry in the
|
|
.B ServerFlags
|
|
section (the former takes precedence over the latter).
|
|
If those options are not used, the first
|
|
.B ServerLayout
|
|
section found in the config file is considered the active one.
|
|
If no
|
|
.B ServerLayout
|
|
sections are present, the single active screen and two active (core)
|
|
input devices are selected as described in the relevant sections above.
|
|
.PP
|
|
.B ServerLayout
|
|
sections have the following format:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.B "Section \*qServerLayout\*q"
|
|
.BI " Identifier \*q" name \*q
|
|
.BI " Screen \*q" screen\-id \*q
|
|
.I " ..."
|
|
.BI " InputDevice \*q" idev\-id \*q
|
|
.I " ..."
|
|
.I " options"
|
|
.I " ..."
|
|
.B "EndSection"
|
|
.fi
|
|
.RE
|
|
.PP
|
|
Each
|
|
.B ServerLayout
|
|
section must have an
|
|
.B Identifier
|
|
entry and at least one
|
|
.B Screen
|
|
entry.
|
|
.PP
|
|
The
|
|
.B Identifier
|
|
entry specifies the unique name for this server layout.
|
|
The
|
|
.B ServerLayout
|
|
section provides information specific to the whole session, including
|
|
session\-specific
|
|
.BR Options .
|
|
The
|
|
.B ServerFlags
|
|
options (described above) may be specified here, and ones given here
|
|
override those given in the
|
|
.B ServerFlags
|
|
section.
|
|
.PP
|
|
The entries that may be used in this section are described here.
|
|
.TP 7
|
|
.BI "Screen " "screen\-num" " \*qscreen\-id\*q " "position\-information"
|
|
One of these entries must be given for each screen being used in
|
|
a session.
|
|
The
|
|
.I screen\-id
|
|
field is mandatory, and specifies the
|
|
.B Screen
|
|
section being referenced.
|
|
The
|
|
.I screen\-num
|
|
field is optional, and may be used to specify the screen number
|
|
in multi\-head configurations.
|
|
When this field is omitted, the screens will be numbered in the order that
|
|
they are listed in.
|
|
The numbering starts from 0, and must be consecutive.
|
|
The
|
|
.I position\-information
|
|
field describes the way multiple screens are positioned.
|
|
There are a number of different ways that this information can be provided:
|
|
.RS 7
|
|
.TP 4
|
|
.I "x y"
|
|
.TP 4
|
|
.BI "Absolute " "x y"
|
|
These both specify that the upper left corner's coordinates are
|
|
.RI ( x , y ).
|
|
The
|
|
.B Absolute
|
|
keyword is optional.
|
|
Some older versions of XFree86 (4.2 and earlier) don't recognise the
|
|
.B Absolute
|
|
keyword, so it's safest to just specify the coordinates without it.
|
|
.TP 4
|
|
.BI "RightOf \*q" screen\-id \*q
|
|
.TP 4
|
|
.BI "LeftOf \*q" screen\-id \*q
|
|
.TP 4
|
|
.BI "Above \*q" screen\-id \*q
|
|
.TP 4
|
|
.BI "Below \*q" screen\-id \*q
|
|
.TP 4
|
|
.BI "Relative \*q" screen\-id \*q " x y"
|
|
These give the screen's location relative to another screen.
|
|
The first four position the screen immediately to the right, left, above or
|
|
below the other screen.
|
|
When positioning to the right or left, the top edges are aligned.
|
|
When positioning above or below, the left edges are aligned.
|
|
The
|
|
.B Relative
|
|
form specifies the offset of the screen's origin (upper left corner)
|
|
relative to the origin of another screen.
|
|
.RE
|
|
.TP 7
|
|
.BI "InputDevice \*q" idev\-id "\*q \*q" option \*q " ..."
|
|
One of these entries should be given for each input device being used in
|
|
a session.
|
|
Normally at least two are required, one each for the core pointer and
|
|
keyboard devices.
|
|
If either of those is missing, suitable
|
|
.B InputDevice
|
|
entries are searched for using the method described above in the
|
|
.B INPUTDEVICE
|
|
section. The
|
|
.I idev\-id
|
|
field is mandatory, and specifies the name of the
|
|
.B InputDevice
|
|
section being referenced.
|
|
Multiple
|
|
.I option
|
|
fields may be specified, each in double quotes.
|
|
The options permitted here are any that may also be given in the
|
|
.B InputDevice
|
|
sections.
|
|
Normally only session\-specific input device options would be used here.
|
|
The most commonly used options are:
|
|
.PP
|
|
.RS 11
|
|
.nf
|
|
.B \*qCorePointer\*q
|
|
.B \*qCoreKeyboard\*q
|
|
.B \*qSendCoreEvents\*q
|
|
.fi
|
|
.RE
|
|
.PP
|
|
.RS 7
|
|
and the first two should normally be used to indicate the core pointer
|
|
and core keyboard devices respectively.
|
|
.RE
|
|
.TP 7
|
|
.B Options
|
|
In addition to the following, any option permitted in the
|
|
.B ServerFlags
|
|
section may also be specified here.
|
|
When the same option appears in both places, the value given here overrides
|
|
the one given in the
|
|
.B ServerFlags
|
|
section.
|
|
.TP 7
|
|
.BI "Option \*qIsolateDevice\*q \*q" bus\-id \*q
|
|
Restrict device resets to the specified
|
|
.IR bus\-id .
|
|
See the
|
|
.B BusID
|
|
option (described in
|
|
.BR "DEVICE SECTION" ,
|
|
above) for the format of the
|
|
.I bus\-id
|
|
parameter.
|
|
This option overrides
|
|
.BR SingleCard ,
|
|
if specified.
|
|
At present, only PCI devices can be isolated in this manner.
|
|
.TP 7
|
|
.BI "Option \*qSingleCard\*q \*q" boolean \*q
|
|
As
|
|
.BR IsolateDevice ,
|
|
except that the bus ID of the first device in the layout is used.
|
|
.PP
|
|
Here is an example of a
|
|
.B ServerLayout
|
|
section for a dual headed configuration with two mice:
|
|
.PP
|
|
.RS 4
|
|
.nf
|
|
.B "Section \*qServerLayout\*q"
|
|
.B " Identifier \*qLayout 1\*q"
|
|
.B " Screen \*qMGA 1\*q"
|
|
.B " Screen \*qMGA 2\*q RightOf \*qMGA 1\*q"
|
|
.B " InputDevice \*qKeyboard 1\*q \*qCoreKeyboard\*q"
|
|
.B " InputDevice \*qMouse 1\*q \*qCorePointer\*q"
|
|
.B " InputDevice \*qMouse 2\*q \*qSendCoreEvents\*q"
|
|
.B " Option \*qBlankTime\*q \*q5\*q"
|
|
.B "EndSection"
|
|
.fi
|
|
.RE
|
|
.SH "DRI SECTION"
|
|
This optional section is used to provide some information for the
|
|
Direct Rendering Infrastructure.
|
|
Details about the format of this section
|
|
can be found in the README.DRI document, which is also available on-line at
|
|
.IR <http://dri.freedesktop.org/> .
|
|
.SH "VENDOR SECTION"
|
|
The optional
|
|
.B Vendor
|
|
section may be used to provide vendor\-specific configuration information.
|
|
Multiple
|
|
.B Vendor
|
|
sections may be present, and they may contain an
|
|
.B Identifier
|
|
entry and multiple
|
|
.B Option
|
|
flags.
|
|
The data therein is not used in this release.
|
|
.PP
|
|
.SH "SEE ALSO"
|
|
General:
|
|
.BR X (__miscmansuffix__),
|
|
.BR Xserver (__appmansuffix__),
|
|
.BR __xservername__ (__appmansuffix__),
|
|
.BR cvt (__appmansuffix__),
|
|
.BR gtf (__appmansuffix__).
|
|
.PP
|
|
.B "Not all modules or interfaces are available on all platforms."
|
|
.PP
|
|
Display drivers:
|
|
.BR apm (__drivermansuffix__),
|
|
.BR ati (__drivermansuffix__),
|
|
.BR chips (__drivermansuffix__),
|
|
.BR cirrus (__drivermansuffix__),
|
|
.BR cyrix (__drivermansuffix__),
|
|
.BR fbdev (__drivermansuffix__),
|
|
.BR glide (__drivermansuffix__),
|
|
.BR glint (__drivermansuffix__),
|
|
.BR i128 (__drivermansuffix__),
|
|
.BR i740 (__drivermansuffix__),
|
|
.BR imstt (__drivermansuffix__),
|
|
.BR intel (__drivermansuffix__),
|
|
.BR mga (__drivermansuffix__),
|
|
.BR neomagic (__drivermansuffix__),
|
|
.BR nv (__drivermansuffix__),
|
|
.BR openchrome (__drivermansuffix__),
|
|
.BR r128 (__drivermansuffix__),
|
|
.BR radeon (__drivermansuffix__),
|
|
.BR rendition (__drivermansuffix__),
|
|
.BR savage (__drivermansuffix__),
|
|
.BR s3virge (__drivermansuffix__),
|
|
.BR siliconmotion (__drivermansuffix__),
|
|
.BR sis (__drivermansuffix__),
|
|
.BR sisusb (__drivermansuffix__),
|
|
.BR sunbw2 (__drivermansuffix__),
|
|
.BR suncg14 (__drivermansuffix__),
|
|
.BR suncg3 (__drivermansuffix__),
|
|
.BR suncg6 (__drivermansuffix__),
|
|
.BR sunffb (__drivermansuffix__),
|
|
.BR sunleo (__drivermansuffix__),
|
|
.BR suntcx (__drivermansuffix__),
|
|
.BR tdfx (__drivermansuffix__),
|
|
.\" .BR tga (__drivermansuffix__),
|
|
.BR trident (__drivermansuffix__),
|
|
.BR tseng (__drivermansuffix__),
|
|
.BR vesa (__drivermansuffix__),
|
|
.BR vmware (__drivermansuffix__),
|
|
.BR voodoo (__drivermansuffix__),
|
|
.BR wsfb (__drivermansuffix__),
|
|
.BR xgi (__drivermansuffix__),
|
|
.BR xgixp (__drivermansuffix__).
|
|
.PP
|
|
Input drivers:
|
|
.BR acecad (__drivermansuffix__),
|
|
.BR calcomp (__drivermansuffix__),
|
|
.BR citron (__drivermansuffix__),
|
|
.BR dmc (__drivermansuffix__),
|
|
.BR dynapro (__drivermansuffix__),
|
|
.BR elographics (__drivermansuffix__),
|
|
.BR evdev (__drivermansuffix__),
|
|
.BR fpit (__drivermansuffix__),
|
|
.BR js_x (__drivermansuffix__),
|
|
.BR joystick (__drivermansuffix__),
|
|
.BR kbd (__drivermansuffix__),
|
|
.BR magictouch (__drivermansuffix__),
|
|
.BR microtouch (__drivermansuffix__),
|
|
.BR mousedrv (__drivermansuffix__),
|
|
.BR mutouch (__drivermansuffix__),
|
|
.BR palmax (__drivermansuffix__),
|
|
.BR penmount (__drivermansuffix__),
|
|
.BR synaptics (__drivermansuffix__),
|
|
.BR tek4957 (__drivermansuffix__),
|
|
.BR ur98 (__drivermansuffix__),
|
|
.BR vmmouse (__drivermansuffix__),
|
|
.BR void (__drivermansuffix__),
|
|
.BR wacom (__drivermansuffix__).
|
|
.PP
|
|
Other modules and interfaces:
|
|
.BR exa (__drivermansuffix__),
|
|
.BR fbdevhw (__drivermansuffix__),
|
|
.\" .BR shadowfb (__drivermansuffix__),
|
|
.BR v4l (__drivermansuffix__).
|
|
.br
|
|
.SH AUTHORS
|
|
This manual page was largely rewritten by David Dawes
|
|
.IR <dawes@xfree86.org> .
|