649 lines
35 KiB
Plaintext
649 lines
35 KiB
Plaintext
<!DOCTYPE linuxdoc PUBLIC "-//Xorg//DTD linuxdoc//EN"[
|
|
<!ENTITY % defs SYSTEM "defs.ent"> %defs;
|
|
]>
|
|
|
|
<article>
|
|
|
|
<!-- Title information -->
|
|
|
|
<title>ATI Adapters README file
|
|
<author>Marc Aurele La France
|
|
<date>2002 February 12
|
|
|
|
|
|
|
|
|
|
|
|
<ident>
|
|
$Id: README.ati.sgml,v 1.1.1.1 2006/11/26 20:00:37 matthieu Exp $
|
|
Based on XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/ati.sgml,v 3.42 2003/01/20 03:43:07 dawes Exp
|
|
</ident>
|
|
|
|
<abstract>
|
|
This is the README for the XAA ATI driver included in this release.
|
|
</abstract>
|
|
|
|
<!-- Table of contents -->
|
|
<toc>
|
|
|
|
<!-- Begin the document -->
|
|
|
|
<sect>Statement of intent<p>
|
|
Generally speaking, the driver is intended for all ATI video adapters
|
|
based on the Mach64 series or older chipsets,
|
|
providing maximum video function within hardware limitations.
|
|
The driver is also intended to optionally provide the same level of support for
|
|
generic VGA or 8514/A adapters.
|
|
The newer Rage 128 and Radeon chips are not yet supported by this driver.
|
|
Rage 128's and Radeon's are, however, supported by separate drivers, and
|
|
owners of such adapters should consult the documentation provided with these
|
|
drivers.
|
|
This driver will also invoke the appropriate driver if it finds Rage 128 and/or
|
|
Radeon adapter(s) in the system.
|
|
This driver is still being actively developed, meaning that it currently does
|
|
not yet fully meet these goals.<p>
|
|
The driver will provide
|
|
<itemize>
|
|
<item>accelerated support if an ATI accelerator is detected <it>and</it> the
|
|
user has not requested that this support be disabled; otherwise
|
|
<item>accelerated support if a non-ATI 8514/A-capable adapter is detected
|
|
<it>and</it> the user has requested such support; otherwise
|
|
<item>unaccelerated SuperVGA support if an ATI VGA-capable adapter is detected;
|
|
otherwise
|
|
<item>generic VGA support if a non-ATI VGA-capable adapter is detected
|
|
<it>and</it> the user has requested such support.
|
|
</itemize>
|
|
Thus, the level of support provided not only depends on what the driver detects
|
|
in the system, but also, on what the user specifies in the xorg.conf file.
|
|
See the <bf>``xorg.conf specifications''</bf> section below for details.<p>
|
|
If none of the above conditions are met, the ATI driver will essentially
|
|
disable itself to allow other drivers to examine the system.<p>
|
|
<!--
|
|
Note that I am currently considering removing the driver's support for generic
|
|
VGA.
|
|
If you have any concerns about this, please contact me at
|
|
<email>tsi@xfree86.org</email>.
|
|
-->
|
|
<sect>A note on acceleration<p>
|
|
The meaning of ``acceleration'', as used in this document, needs to be
|
|
clarified.
|
|
Two of the many components in an accelerator are the CRT controller (CRTC) and
|
|
the Draw Engine.
|
|
This is in addition to another CRTC that, generally, is also present in the
|
|
system (often in the same chip) and typically provides EGA, VGA or SuperVGA
|
|
functionality.<p>
|
|
A CRTC is the component of a graphics controller that is responsible for
|
|
reading video memory for output to the screen.
|
|
A Draw Engine is an accelerator component that can be programmed to manipulate
|
|
video memory contents, thus freeing the CPU for other tasks.<p>
|
|
When the VGA CRTC is used, all drawing operations into video memory are the
|
|
responsibility of the system's CPU, i.e. no Draw Engine can be used.
|
|
On the other hand, if the accelerator's CRTC is chosen to drive the screen,
|
|
the Draw Engine can also be used for drawing operations, although the CPU can
|
|
still be used for this purpose if it can access the accelerator's video
|
|
memory.<p>
|
|
Video acceleration refers to the programming of an accelerator's Draw Engine to
|
|
offload drawing operations from the CPU, and thus also implies the use of the
|
|
accelerator's CRTC.<p>
|
|
<sect>Current implementation for ATI adapters<p>
|
|
The driver currently supports the SuperVGA capabilities of all ATI adapters
|
|
except some early Mach8 and Mach32 adapters that do not provide the required
|
|
functionality.
|
|
This support works for monochrome, 16-colour and 256-colour video modes, if one
|
|
of the following ATI graphics controller chips is present:
|
|
<verb>
|
|
VGAWonder series: 18800, 18800-1, 28800-2, 28800-4, 28800-5, 28800-6
|
|
Mach32 series: 68800-3, 68800-6, 68800AX, 68800LX
|
|
Mach64 series: 88800GX-C, 88800GX-D, 88800GX-E, 88800GX-F, 88800CX,
|
|
264CT, 264ET, 264VT, 264GT (3D Rage), 264VT-B, 264VT3,
|
|
264VT4, 264GT-B (3D Rage II), 3D Rage IIc, 3D Rage Pro,
|
|
3D Rage LT, 3D Rage LT Pro, 3D Rage XL, 3D Rage XC,
|
|
3D Rage Mobility (including the -M and -P variants)</verb>
|
|
The driver also supports 32K, 64K and 16M-colour modes on the 264xT and 3D Rage
|
|
series of adapters using the accelerator CRTC (but not the VGA CRTC).<p>
|
|
The newer Rage 128 and Radeon chips are not yet supported by this driver.
|
|
Rage 128's and Radeon's are, however, supported by separate drivers, and
|
|
owners of such adapters should consult the documentation provided with these
|
|
drivers.
|
|
This driver will also invoke the appropriate driver if it finds Rage 128 and/or
|
|
Radeon adapter(s) in the system.<p>
|
|
Adapters based on the above chips have been marketed under a rather large
|
|
number of names over the years.
|
|
Among them are:
|
|
<verb>
|
|
VGAWonder series: VGAWonder V3, VGAWonder V4, VGAWonder V5, VGAWonder+,
|
|
VGAWonder XL, VGAWonder XL24, VGAWonder VLB, VGA Basic,
|
|
VGA Basic 16, VGA Edge, VGA Edge 16, VGA Integra,
|
|
VGA Charger, VGAStereo F/X, VGA 640, VGA 800, VGA 1024,
|
|
VGA 1024D, VGA 1024 XL, VGA 1024 DXL, VGA 1024 VLB
|
|
Mach8 series: Graphics Ultra, Graphics Vantage, VGAWonder GT
|
|
(None of the 8514/Ultra and 8514 Vantage series is
|
|
supported at this time)
|
|
Mach32 series: Graphics Ultra+, Graphics Ultra Pro, Graphics Wonder,
|
|
Graphics Ultra XLR, Graphics Ultra AXO, VLB mach32-D,
|
|
PCI mach32-D, ISA mach32
|
|
Mach64 series: Graphics Xpression, Graphics Pro Turbo, WinBoost,
|
|
WinTurbo, Graphics Pro Turbo 1600, Video Xpression,
|
|
3D Xpression, Video Xpression+, 3D Xpression+,
|
|
3D Charger, Video Charger, WinCharger, All-In-Wonder,
|
|
All-In-Wonder PRO, 3D Pro Turbo, XPERT@Play,
|
|
XPERT@Play 98, XPERT@Work, XPERT 98, XPERT LCD,
|
|
XPERT XL</verb>
|
|
Also, a number of mainboards, laptops and notebooks harbour a Mach32 or Mach64
|
|
controller.<p>
|
|
VGAWonder, Mach8 and Mach32 ISA adapters are available with or without a
|
|
mouse.<p>
|
|
These adapters are available with a variety of clock generators and RAMDACs.
|
|
The 264xT and 3D Rage series of chips are integrated controllers, meaning that
|
|
they include a programmable clock generator and a RAMDAC.<p>
|
|
For all but Mach64 adapters, this driver still does not provide support for
|
|
accelerated drawing to the screen.
|
|
This means that all drawing is done by the CPU, rather than by any accelerator
|
|
present in the system.
|
|
This can make opaque moves, for example, quite ``jerky''.
|
|
Also, given that IBM 8514/A and ATI Mach8 do not allow CPU access to their
|
|
frame buffer, the driver will currently ignore these accelerators.
|
|
Most Mach32 adapters provide both accelerated function and SuperVGA
|
|
functionality, but the driver currently only uses the VGA.<p>
|
|
The driver <it>does</it> however support the accelerator CRTC present in all
|
|
ATI Mach64 adapters.
|
|
For 256-colour, and higher depth modes, this support will be used by default,
|
|
although an xorg.conf option can be specified to use the SuperVGA CRTC
|
|
instead.
|
|
A linear video memory aperture is also available in 256-colour and higher depth
|
|
modes and enabled by default if a 264xT or 3D Rage controller is detected or,
|
|
on 88800 controllers, if the accelerator CRTC is used.
|
|
xorg.conf options are available to disable this aperture, or (for non-PCI
|
|
adapters) enable it or move it to some other address.<p>
|
|
By default, the driver provides some acceleration for Mach64 if the accelerator
|
|
CRTC is used, and modes whose colour depth greater than or equal to 8 are to be
|
|
used.
|
|
This support is as yet incomplete and can be disabled entirely with an
|
|
xorg.conf option.<p>
|
|
On non-Intel platforms, the driver can, currently, only support PCI Mach64
|
|
adapters.<p>
|
|
<sect>Current implementation of generic VGA support for non-ATI adapters<p>
|
|
Support for generic VGA with non-ATI adapters is also implemented, but has
|
|
undergone only limited testing.
|
|
The driver will intentionally disallow the use of this support with ATI
|
|
adapters.
|
|
This support must be explicitly requested through an xorg.conf ChipSet
|
|
specification.
|
|
This prevents the current VGA generic driver from being disabled.<p>
|
|
This driver's generic VGA support is intended as an extension of that provided
|
|
by the current generic driver.
|
|
Specifically, within the architectural bounds defined by IBM's VGA standard,
|
|
this driver will allow the use of any 256-colour mode, and any dot clock
|
|
frequencies both of which allow for many more mode possibilities.<p>
|
|
The driver will enforce the following limitations derived from IBM's original
|
|
VGA implementation:
|
|
<itemize>
|
|
<item>There can only be a set of four (non-programmable) clocks to choose from.
|
|
<item>Video memory is limited to 256kB in monochrome and 16-colour modes.
|
|
<item>Video memory is limited to 64kB in 256-colour modes.
|
|
<item>Interlaced modes are not available.
|
|
<item>Colour depths higher than 8 are not available.
|
|
</itemize>
|
|
<sect>xorg.conf specifications<p>
|
|
The driver recognises a number of xorg.conf options.
|
|
In general, all such options should be specified in a ``Device'' section, and
|
|
affect only that ``Device'' section.<p>
|
|
Those options that affect how the driver associates adapters with ``Device''
|
|
sections are described first.
|
|
The driver will ignore (with a message) a ``Device'' section if the section
|
|
cannot be associated with exactly one adapter in the system.
|
|
Similarly, the driver will ignore, or disable, (with a message) any adapter
|
|
that cannot be associated with exactly one ``Device'' section.
|
|
Thus, these options will be required in those uncommon cases where such unique
|
|
associations cannot automatically be made by the driver.<p>
|
|
Other options affect the driver's operation once an adapter has been assigned
|
|
to the ``Device'' section which contains them.<p>
|
|
<sect1>Driver ``ati''<p>
|
|
The use of this specification is highly recommended if the ``Device'' section
|
|
is to be recognised by the driver.
|
|
In fact, it is almost (but not quite) mandatory, particularly when using the
|
|
loader server as it indicates what driver is to be loaded and associated with
|
|
the ``Device'' section.<p>
|
|
<sect1>ChipSet ``name''<p>
|
|
The default ChipSet name for this driver is ``<it>ati</it>''.
|
|
In this case, any ATI adapter can be associated with the ``Device'' section.
|
|
If an ATI accelerator is detected and the driver supports it, the accelerator's
|
|
CRTC will be used to drive the screen.
|
|
Otherwise, the driver will programme the adapter's SuperVGA CRTC.<p>
|
|
If ``<it>ativga</it>'' is specified instead, the driver will ignore any ATI
|
|
accelerator it detects, but otherwise operate as if ``<it>ati</it>'' had been
|
|
specified.
|
|
This specification ensures the VGA CRTC is used.<p>
|
|
A ChipSet name of ``<it>ibmvga</it>'' causes any VGA-capable adapter in the
|
|
system to be associated with the ``Device'' section.
|
|
It enables the driver's generic VGA support, but only for non-ATI adapters.
|
|
If an ATI adapter is associated with the ``Device'' section, the driver will
|
|
operate as if ``<it>ativga</it>'' had been specified instead.<p>
|
|
A ChipSet name of ``<it>vgawonder</it>'' is equivalent to ``<it>ativga</it>'',
|
|
except that only VGAWonder-capable adapters can be assigned to the ``Device''
|
|
section.
|
|
This specifically excludes the newer integrated Mach64 controllers.<p>
|
|
In some PCI or AGP systems, the driver will not, by default, probe for non-PCI
|
|
Mach32's or Mach64's.
|
|
This is because, before doing any such probe, the driver attempts to determine
|
|
if the probe can cause a lockup.
|
|
If the driver has enough information to determine that a lockup would occur, it
|
|
will skip the probe.
|
|
In some situations, this determination cannot be accurate, and the driver will
|
|
err on the side of caution, skipping the probe.
|
|
Specifying a ChipSet name of ``<it>mach32</it>'' or ``<it>mach64</it>'', as
|
|
appropriate, will force the driver to probe for the non-PCI adapter.
|
|
These ChipSet names should, therefore, only be used when there is in fact such
|
|
an adapter in the system.
|
|
They are otherwise equivalent to ``<it>ati</it>''.<p>
|
|
On non-Intel platforms, only ``<it>ati</it>'' and ``<it>mach64</it>'' ChipSet
|
|
values are operative.<p>
|
|
<sect1>ChipID & ChipRev specifications<p>
|
|
These specifications will cause the driver to associate the ``Device'' section
|
|
only with an adapter having the same attributes, or an adapter whose PCI device
|
|
ID the driver does not recognise.
|
|
In the second case, these options cause the driver to treat the adapter as if
|
|
it was one with the specified PCI device ID or revision.
|
|
ChipID can only be used with Mach32 or Mach64 adapters, and, thus, specifically
|
|
excludes any other adapter from matching the ``Device'' section.
|
|
ChipRev is meaningful only with Mach64 adapters, and then only if ChipID is
|
|
also specified in the same ``Device'' section.<p>
|
|
<sect1>IOBase<p>
|
|
This option limits the adapters that can be associated with the ``Device''
|
|
section to the one with the specified I/O base.
|
|
This option only applies to Mach64 adapters and specifically excludes other
|
|
adapters.<p>
|
|
<sect1>BusID<p>
|
|
This option limits the adapters that can be associated with the ``Device''
|
|
section to the one with the specified PCI Bus ID.
|
|
This specification excludes non-PCI adapters.<p>
|
|
<sect1>Clocks<p>
|
|
For the purpose of specifying a clock line in your xorg.conf, one of four
|
|
different situations can occur, as follows.<p>
|
|
Those configuring the driver's generic VGA support for a non-ATI adapter,
|
|
can skip ahead to the <bf>``Clocks for non-ATI adapters''</bf> section below.
|
|
Those <it>not</it> trying to configure the driver for a Mach64 adapter, can
|
|
skip ahead to the <bf>``Clocks for fixed clock generators on ATI
|
|
adapters''</bf> section below.<p>
|
|
The very earliest Mach64 adapters use fixed (i.e. non-programmable) clock
|
|
generators.
|
|
Very few of these (mostly prototypes) are known to exist, but if you have one
|
|
of these, you can also skip ahead to the <bf>``Clocks for fixed clock
|
|
generators on ATI adapters''</bf> section below.<p>
|
|
The two cases that are left deal with programmable clock generators, which are
|
|
used on the great majority of Mach64 adapters.<p>
|
|
If you are uncertain which situation applies to your adapter, you can run a
|
|
clock probe with the command ``<tt>X -probeonly</tt>''.<p>
|
|
<sect2>Clocks for supported programmable clock generators<p>
|
|
At bootup, video BIOS initialisation programmes an initial set of frequencies.
|
|
Two of these are reserved to allow the setting of modes that do not use a
|
|
frequency from this initial set.
|
|
One of these reserved slots is used by the BIOS mode set routine, the other by
|
|
the particular driver used (e.g. MS-Windows, AutoCAD, X, etc.).
|
|
The clock numbers reserved in this way are dependent on the particular clock
|
|
generator used by the adapter.<p>
|
|
The driver currently supports all programmable clock generators known to exist
|
|
on Mach64 adapters.
|
|
In this case, the driver will completely ignore any xorg.conf clock
|
|
specification, and programme the clock generator as needed by the modes used
|
|
during the X session.<p>
|
|
<sect2>Clocks for unsupported programmable clock generators<p>
|
|
This case is unlikely to occur, but is documented for the sake of
|
|
completeness.<p>
|
|
In this situation, the driver will probe the adapter for clock frequencies
|
|
unless xorg.conf clocks are already specified.
|
|
In either case, the driver will then attempt to normalise the clocks to one of
|
|
the following specifications:
|
|
<verb>
|
|
BIOS setting 1:
|
|
|
|
Clocks 0.000 110.000 126.000 135.000 50.350 56.640 63.000 72.000
|
|
0.000 80.000 75.000 65.000 40.000 44.900 49.500 50.000
|
|
0.000 55.000 63.000 67.500 25.180 28.320 31.500 36.000
|
|
0.000 40.000 37.500 32.500 20.000 22.450 24.750 25.000</verb>
|
|
<verb>
|
|
BIOS setting 2:
|
|
|
|
Clocks 0.000 110.000 126.000 135.000 25.180 28.320 31.500 36.000
|
|
0.000 80.000 75.000 65.000 40.000 44.900 49.500 50.000
|
|
0.000 55.000 63.000 67.500 12.590 14.160 15.750 18.000
|
|
0.000 40.000 37.500 32.500 20.000 22.450 24.750 25.000</verb>
|
|
<verb>
|
|
BIOS setting 3:
|
|
|
|
Clocks 0.000 0.000 0.000 0.000 25.180 28.320 0.000 0.000
|
|
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
|
|
0.000 0.000 0.000 0.000 12.590 14.160 0.000 0.000
|
|
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000</verb>
|
|
If the driver matches the clocks to the third setting above, functionality will
|
|
be <it>extremely</it> limited (assuming the driver works at all).<p>
|
|
<sect2>Clocks for fixed clock generators on ATI adapters<p>
|
|
This section applies to all VGAWonder and Mach32 adapters, and to early Mach64
|
|
prototypes.<p>
|
|
One of the following clocks specifications (or an initial subset thereof) can
|
|
be used depending on what the adapter uses to generate dot clocks:
|
|
<verb>
|
|
Crystals (VGA Wonder V3 and V4 adapters only):
|
|
|
|
Clocks 50.000 56.644 0.000 44.900 44.900 50.000 0.000 36.000
|
|
25.000 28.322 0.000 22.450 22.450 25.000 0.000 18.000
|
|
16.667 18.881 0.000 14.967 14.967 16.667 0.000 12.000
|
|
12.500 14.161 0.000 11.225 11.225 12.500 0.000 9.000</verb>
|
|
<verb>
|
|
ATI 18810 clock generator:
|
|
|
|
Clocks 30.240 32.000 37.500 39.000 42.954 48.771 0.000 36.000
|
|
40.000 0.000 75.000 65.000 50.350 56.640 0.000 44.900
|
|
15.120 16.000 18.750 19.500 21.477 24.386 0.000 18.000
|
|
20.000 0.000 37.500 32.500 25.175 28.320 0.000 22.450
|
|
10.080 10.667 12.500 13.000 14.318 16.257 0.000 12.000
|
|
13.333 0.000 25.000 21.667 16.783 18.880 0.000 14.967
|
|
7.560 8.000 9.375 9.750 10.739 12.193 0.000 9.000
|
|
10.000 0.000 18.750 16.250 12.586 14.160 0.000 11.225</verb>
|
|
<verb>
|
|
ATI 18811-0 and ATI 18812-0 clock generators:
|
|
|
|
Clocks 30.240 32.000 110.000 80.000 42.954 48.771 92.400 36.000
|
|
39.910 44.900 75.000 65.000 50.350 56.640 0.000 44.900
|
|
15.120 16.000 55.000 40.000 21.477 24.386 46.200 18.000
|
|
19.955 22.450 37.500 32.500 25.175 28.320 0.000 22.450
|
|
10.080 10.667 36.667 26.667 14.318 16.257 30.800 12.000
|
|
13.303 14.967 25.000 21.667 16.783 18.880 0.000 14.967
|
|
7.560 8.000 27.500 20.000 10.739 12.193 23.100 9.000
|
|
9.978 11.225 18.750 16.250 12.588 14.160 0.000 11.225</verb>
|
|
<verb>
|
|
ATI 18811-1 and ATI 18811-2 clock generators:
|
|
|
|
Clocks 135.000 32.000 110.000 80.000 100.000 126.000 92.400 36.000
|
|
39.910 44.900 75.000 65.000 50.350 56.640 0.000 44.900
|
|
67.500 16.000 55.000 40.000 50.000 63.000 46.200 18.000
|
|
19.955 22.450 37.500 32.500 25.175 28.320 0.000 22.450
|
|
45.000 10.667 36.667 26.667 33.333 42.000 30.800 12.000
|
|
13.303 14.967 25.000 21.667 16.783 18.880 0.000 14.967
|
|
33.750 8.000 27.500 20.000 25.000 31.500 23.100 9.000
|
|
9.978 11.225 18.750 16.250 12.588 14.160 0.000 11.225</verb>
|
|
<verb>
|
|
ICS 2494-AM clock generators (found on some Dell motherboards):
|
|
|
|
Clocks 75.000 77.500 80.000 90.000 25.175 28.322 31.500 36.000
|
|
100.000 110.000 126.000 135.000 40.000 44.900 50.000 65.000
|
|
37.500 38.750 40.000 45.000 12.588 14.161 15.750 18.000
|
|
50.000 55.000 63.000 67.500 20.000 22.450 25.000 32.500
|
|
25.000 25.833 26.667 30.000 8.392 9.441 10.500 12.000
|
|
33.333 36.667 42.000 45.000 13.333 14.767 16.667 21.667
|
|
18.750 19.375 20.000 22.500 6.294 7.081 7.875 9.000
|
|
25.000 27.500 31.500 33.750 10.000 11.225 12.500 16.250</verb>
|
|
VGAWonder VLB, VGA 1024 VLB, Mach32 and Mach64 owners should only specify up to
|
|
the first 32 frequencies.
|
|
Any more will be ignored.<p>
|
|
Other clock generators that have been used on ATI adapters (which can all be
|
|
said to be clones of one of the above) might generate non-zero frequencies for
|
|
those that are zero above, or vice-versa.<p>
|
|
The order of the clocks <it>is</it> very important, although the driver will
|
|
reorder the specified clocks if it deems it appropriate to do so.
|
|
Mach32 and Mach64 owners should note that this order is different than what
|
|
they would use for previous accelerated servers.<p>
|
|
<sect2>Clocks for non-ATI adapters<p>
|
|
If no clocks are specified in the xorg.conf, the driver will probe for four
|
|
clocks, the second of which will be assumed to be 28.322 MHz.
|
|
The first clock will typically be 25.175 MHz, but there are exceptions.
|
|
You can include up to four clock frequencies in your xorg.conf to specify the
|
|
actual values used by the adapter.
|
|
Any more will be ignored.<p>
|
|
<sect1>Option <it>``nopanel_display''</it><p>
|
|
This specification is only effective when the driver detects that the adapter's
|
|
BIOS has initialised both the digital flat panel and CRT interfaces.
|
|
In such a situation, the driver will normally drive both the panel and the CRT.
|
|
This specification causes the driver to disable the digital flat panel and
|
|
display the screen image on the CRT instead, which could potentially allow for
|
|
larger physical resolutions than the panel can handle.<p>
|
|
<sect1>Option <it>``crt_display''</it><p>
|
|
This specification is only effective when the driver detects that the adapter's
|
|
BIOS has initialised the digital flat panel interface, but has disabled the
|
|
CRT interface.
|
|
In such a situation the driver will normally drive only the panel.
|
|
This specification causes the driver to instead display the same image on both
|
|
the panel and the CRT.<p>
|
|
<sect1>Option <it>``noaccel''</it><p>
|
|
By default, the driver will accelerate draw operations if a Mach64 CRTC is used
|
|
to drive the display.
|
|
As implemented in this driver, acceleration does not require a linear video
|
|
memory aperture.
|
|
This option disables this acceleration.<p>
|
|
<sect1>Option <it>``nolinear''</it><p>
|
|
By default, the driver will enable a linear video memory aperture for
|
|
256-colour and higher depth modes if it is also using a Mach64 accelerator CRTC
|
|
or an integrated Mach64 graphics chip.
|
|
This option disables this linear aperture.<p>
|
|
On non-Intel platforms, the driver requires a linear aperture and, so, this
|
|
option is ignored.<p>
|
|
<sect1>Option <it>``HWCursor''</it> and Option <it>``SWCursor''</it><p>
|
|
Option <it>``HWCursor''</it>, which is the default, specifies that hardware
|
|
facilities are to be used to paint the mouse pointer on the screen.
|
|
Option <it>``SWCursor''</it> specifies that the mouse pointer is to be drawn by
|
|
software, which is much slower.
|
|
If both options are specified, option <it>``SWCursor''</it> prevails.
|
|
Currently, these options are only acted upon for 256-colour or higher depth
|
|
modes, if a Mach64 accelerator CRTC, or a Mach64 integrated controller is being
|
|
used.
|
|
In all other situations, a software cursor will be used, regardless of what
|
|
these options specify.<p>
|
|
<sect1>Option <it>``SilkenMouse''</it><p>
|
|
This option is only acted upon when a hardware cursor is being used.
|
|
It specifies that the cursor's position on the screen is to be updated as
|
|
quickly as possible when the mouse is moved.
|
|
This is the default behaviour.
|
|
If this option is negated, the cursor may lag the mouse when the X server is
|
|
very busy.<p>
|
|
<sect1>Option <it>``shadowfb''</it><p>
|
|
If this option is enabled, the driver will cause the CPU to do each drawing
|
|
operation first into a shadow frame buffer in system virtual memory and then
|
|
copy the result into video memory.
|
|
If this option is not active, the CPU will draw directly into video memory.
|
|
Enabling this option is beneficial for those systems where reading from video
|
|
memory is, on average, slower than the corresponding read/modify/write
|
|
operation in system virtual memory.
|
|
This is normally the case for PCI or AGP adapters, and, so, this option is
|
|
enabled by default.
|
|
For other bus types, the default behaviour is to disable this option.<p>
|
|
Note that, due to various limitations, this option is forcibly disabled when a
|
|
linear video memory aperture is not enabled, when the frame buffer depth is
|
|
less than 8, or when acceleration is used.<p>
|
|
<sect1>Option <it>``dpms''</it><p>
|
|
This option enables the driver's support for VESA's Display Power Management
|
|
Specification.<p>
|
|
<sect1>Option <it>``backingstore''</it><p>
|
|
This is not specifically a driver option.
|
|
It is used to enable the server's support for backing store, a mechanism by
|
|
which pixel data for occluded window regions is remembered by the server
|
|
thereby alleviating the need to send expose events to X clients when the data
|
|
needs to be redisplayed.<p>
|
|
<sect1>MemBase <it>address</it><p>
|
|
This specification is only effective for non-PCI Mach64 adapters, and is used
|
|
to override the CPU address at which the adapter will map its video memory.
|
|
Normally, for non-PCI adapters, this address is set by a DOS install utility
|
|
provided with the adapter.
|
|
The MemBase option can also be used to enable the linear aperture in those
|
|
cases where ATI's utility was not, or can not be, used.<p>
|
|
For PCI and AGP adapters, this address is determined at system bootup according
|
|
to the PCI Plug'n'Play specification which arbitrates the resource requirements
|
|
of most devices in the system.
|
|
This means the driver can not easily change the linear aperture address.<p>
|
|
<sect1>Option <it>``ReferenceClock''</it> ``frequency''<p>
|
|
This option is only applicable to non-Intel platforms, where an adapter BIOS is
|
|
not available to the driver.
|
|
The option specifies the reference frequency used by the adapter's clock
|
|
generator.
|
|
The default is 14.318 MHz, and other typical values are 28.636, or 29.5 MHz.<p>
|
|
<sect1>ClockChip <it>``name''</it><p>
|
|
This option is only applicable to non-Intel platforms, where an adapter BIOS is
|
|
not available to the driver, and the driver cannot reliably determine whether
|
|
the clock generator the adapter uses is a variant of an ATI 18818 (a.k.a.
|
|
ICS 2595) or an unsupported clock generator.
|
|
The only values that are acted upon are <it>``ATI 18818-0''</it> or
|
|
<it>``ATI 18818-1''</it>.
|
|
From this specification, the driver derives a reference divider of 43 or 46
|
|
(respectively) for use in clock programming calculations.
|
|
The driver's default behaviour, in this case, is to assume an unsupported clock
|
|
generator, which means it will treat it as a fixed-frequency clock generator,
|
|
as described under the heading <bf>``Clocks for unsupported programmable clock
|
|
generators''</bf> above.<p>
|
|
<sect>Video modes<p>
|
|
Mode timings can be derived from the information in X's doc subdirectory.
|
|
However, it is no longer required to specify such timings in an xorg.conf's
|
|
``Monitor'' section(s), if only standard mode timings are to be used.
|
|
The server automatically inserts VESA standard mode timings in every
|
|
``Monitor'' section, and these modes will be checked first for mode constraints
|
|
(monitor sync tolerances, video memory size, etc.).<p>
|
|
Furthermore, it is also no longer required to specify mode names in ``Display''
|
|
subsections.
|
|
Should no mode names be specified (or those specified do not yield a usable
|
|
mode), the server will automatically select as a default resolution the largest
|
|
usable mode, whether or not the chosen mode is specified in the corresponding
|
|
``Monitor'' section.<p>
|
|
For a digital flat panel, any sync tolerances should be removed from the
|
|
corresponding ``Monitor'' section.
|
|
The driver will automatically calculate these from the mode that is active on
|
|
server entry.
|
|
The driver also inserts timings for a mode called <it>"Native panel mode"</it>
|
|
that represents the panel's native resolution.<p>
|
|
<sect>Known problems and limitations<p>
|
|
There are several known problems or limitations related to the ATI
|
|
driver.
|
|
They include:<p>
|
|
<itemize>
|
|
<item>When using a Mach64's accelerator CRTC, the virtual resolution must be
|
|
less than 8192 pixels wide.
|
|
The VGA CRTC further limits the virtual resolution width to less than 4096
|
|
pixels, or to less than 2048 pixels for adapters based on 18800-x's (with 256kB
|
|
of memory) and on Mach64 integrated controllers.
|
|
These are hardware limits that cannot be circumvented.
|
|
<item>Virtual resolutions requiring more than 1MB of video memory (256kB in the
|
|
monochrome case) are not supported by the VGA CRTC on 88800GX and 88800CX
|
|
adapters.
|
|
This is a hardware limit that cannot be circumvented.
|
|
<item>Due to hardware limitations, doublescanned modes are not supported by the
|
|
accelerator CRTC in 88800GX, 88800CX, 264CT and 264ET adapters.
|
|
<item>The ``VScan'' modeline parameter is only supported when using the VGA
|
|
CRTC.
|
|
<item>Interlaced modes are not supported on 18800-x and 28800-x adapters when
|
|
using a virtual resolution that is 2048 pixels or wider.
|
|
When using a 18800-x with 256kB of video memory in 256-colour modes, this limit
|
|
is reduced to 1024.
|
|
This is yet another hardware limitation that cannot be circumvented.
|
|
<item>Video memory banking does not work in monochrome and 16-colour modes on
|
|
18800-x adapters.
|
|
This appears to be another hardware limit, but this conclusion cannot be
|
|
confirmed at this time.
|
|
The driver's default behaviour in this case is to limit video memory to 256kB.
|
|
<item>Video memory corruption can still occur during mode switches on 18800-x
|
|
adapters.
|
|
Symptoms of this problem include garbled fonts on return to text mode, and
|
|
various effects (snow, dashed lines, etc) on initial entry into a graphics
|
|
mode.
|
|
In the first case, the workaround is to use some other means of restoring the
|
|
text font.
|
|
On Linux, this can be accomplished with the kbd or svgalib packages.
|
|
In the second case, <htmlurl name="xrefresh(1)" url="xrefresh.1.html">
|
|
will usually clean up the image.
|
|
No complete solution to this problem is currently known.
|
|
It appears this corruption occurs due to either video memory bandwidth or
|
|
RAMDAC limitations, and so the driver will limit mode clocks to 40MHz.
|
|
<item>There is some controversy over what the maximum allowed clock frequency
|
|
should be on 264xT and 3D Rage adapters.
|
|
For now, clocks will, by default, be limited to 80MHz, 135MHz, 170MHz, 200MHz
|
|
or 230MHz, depending on the specific controller.
|
|
This limit can only be increased (up to a driver-calculated absolute maximum)
|
|
through the DACSpeed specification in xorg.conf.
|
|
Be aware however that doing so is untested and might damage the adapter.
|
|
<item>Except as in the previous items, clocks are limited to 80MHz on most
|
|
adapters, although many are capable of higher frequencies.
|
|
This will eventually be fixed in a future release.
|
|
<item>The use of a laptop's hot-keys to switch displays while this driver is
|
|
active can cause lockups and/or other woes, and is therefore not recommended.
|
|
It is not currently possible to solve this problem.<p>
|
|
<item>In situations where the driver is to simultaneously display on both a
|
|
panel and a CRT, the same image will be seen on both.
|
|
In particular, this means the CRT must be able to synchronise with the timings
|
|
of the panel's native resolution.
|
|
This is quite evident when the panel has ``odd-ball'' dimensions, such as
|
|
1400x1050, a resolution not commonly possible on CRTs or projection
|
|
equipment.<p>
|
|
Also, the display of independent images on the panel and CRT is not currently
|
|
implemented, and might never be, pending resolution of the previous item.<p>
|
|
</itemize>
|
|
Support for the following will be added in a future release:
|
|
<itemize>
|
|
<item>Mach32's accelerator CRTC.
|
|
This support is the first step towards accelerated support for Mach32's,
|
|
Mach8's, 8514/A's and other clones.
|
|
<item>Colour depth greater than 8 on non-integrated controllers, where
|
|
permitted by the hardware.
|
|
<item>Mach32, Mach8 and 8514/A Draw Engines.
|
|
<item>Hardware cursors where implemented by hardware.
|
|
This has already been done for Mach64 integrated controllers.
|
|
<item>TVOut, i.e. the ability to use a television screen as a monitor.
|
|
<item>Motion Video, i.e. displaying an asynchronous data stream (TV signal,
|
|
DVD, etc.) in a window or full-screen.
|
|
<item>3D operations.
|
|
</itemize>
|
|
<sect>Reporting problems<p>
|
|
If you are experiencing problems that are not already recorded in this
|
|
document, first ensure that you have the latest current release of this driver
|
|
and the Xorg X server.
|
|
Check the server's log (usually found in /var/log/Xorg.0.log) and <htmlurl
|
|
name="ftp://ftp.freedesktop.org/pub/Xorg"
|
|
url="ftp://ftp.freedesktop.org/pub/Xorg"> if you are uncertain.<p>
|
|
Secondly, please check Xorg's doc directory for additional information.<p>
|
|
Thirdly, a scan through the comp.windows.x.i386unix and comp.os.linux.x
|
|
newsgroups, the xorg mailing list archives at <htmlurl
|
|
name="http://lists.freedesktop.org/mailman/listinfo/xorg"
|
|
url="http://lists.freedesktop.org/mailman/listinfo/xorg">, and
|
|
the Xorg bug database at <htmlurl
|
|
name="https://bugs.freedesktop.org/enter_bug.cgi?product=xorg"
|
|
url="https://bugs.freedesktop.org/enter_bug.cgi?product=xorg">
|
|
can also prove useful in resolving problems.<p>
|
|
If you are still experiencing problems, you can send <it>non-HTMLised</it>
|
|
e-mail to <email>xorg@lists.fredesktop.org</email>.
|
|
Please be as specific as possible when describing the problem(s), and include
|
|
an <it>unedited</it> copy of the server's log and the xorg.conf file used.<p>
|
|
<sect>Driver history<p>
|
|
The complete history of the driver is rather cloudy.
|
|
The following is more than likely to be incomplete and inaccurate.<p>
|
|
Apparently, Per Lindqvist first got a driver working with an early ATI adapter
|
|
under X386 1.1a.
|
|
This original driver might have actually been based on a non-functional ATI
|
|
driver written by Thomas Roell (currently of Xi Graphics).<p>
|
|
Then Doug Evans added support for the ATI VGA Wonder XL, trying in the process
|
|
to make the driver work with all other ATI adapters available at the time.<p>
|
|
Rik Faith obtained the X11R4 driver from Doug Evans in the summer of 1992 and
|
|
ported the code to the X386 part of X11R5.
|
|
This subsequently became part of XFree86.<p>
|
|
Marc Aurele La France took over development and maintenance of the driver
|
|
in the fall of 1993 after Rik got rid of his VGA Wonder adapter.<p>
|
|
<sect>Driver versions<p>
|
|
Due to the introduction of loadable drivers in XFree86 4.0, it has become
|
|
necessary to track driver versions separately.
|
|
Driver releases use the following version numbering scheme.<p>
|
|
Version 1 of this driver is the one I inherited from Rik Faith.
|
|
This is the version found in XFree86 2.0 and 2.1.<p>
|
|
Version 2 is my first rewrite of this code which only ended up being a
|
|
partially unsuccessful attempt at generalising the driver for all VGA Wonder,
|
|
Mach32, and early Mach64 adapters.
|
|
Various releases of this version of the driver can be found in XFree86 2.1.1,
|
|
3.1, 3.1.1 and 3.1.2.<p>
|
|
Version 3 represents my second rewrite (although a rather lame one as rewrites
|
|
go).
|
|
Into version 3, I introduced clock programming for Mach64 adapters and merged
|
|
in the old ati_test debugging tool.
|
|
This is the version found in XFree86 3.2, 3.3 and 3.3.1.<p>
|
|
Version 4 is a rather major restructuring of version 3, which became larger
|
|
than I could comfortably handle in one source file.
|
|
This is the version found in XFree86 3.3.2, 3.3.3, 3.3.3.1, 3.3.3.2, 3.3.4,
|
|
3.3.5 and 3.3.6.<p>
|
|
Version 5 is an almost complete restructuring of version 4 to fit in the newer
|
|
driver API of XFree86 4.0 and later.<p>
|
|
The introduction of version 6 is a first swipe at porting the driver to
|
|
non-Intel architectures.<p>
|
|
</article>
|