1541 lines
72 KiB
Plaintext
1541 lines
72 KiB
Plaintext
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Xterm Control Sequences
|
|
|
|
Edward Moy
|
|
University of California, Berkeley
|
|
|
|
Revised by
|
|
|
|
Stephen Gildea
|
|
X Consortium (1994)
|
|
|
|
Thomas Dickey
|
|
XFree86 Project (1996-2006)
|
|
invisible-island.net (2006-2011)
|
|
|
|
|
|
|
|
Definitions
|
|
|
|
c The literal character c.
|
|
|
|
C A single (required) character.
|
|
|
|
Ps A single (usually optional) numeric parameter, composed of one of
|
|
more digits.
|
|
|
|
Pm A multiple numeric parameter composed of any number of single
|
|
numeric parameters, separated by ; character(s). Individual val-
|
|
ues for the parameters are listed with Ps .
|
|
|
|
Pt A text parameter composed of printable characters.
|
|
|
|
C1 (8-Bit) Control Characters
|
|
|
|
The xterm program recognizes both 8-bit and 7-bit control characters.
|
|
It generates 7-bit controls (by default) or 8-bit if S8C1T is enabled.
|
|
The following pairs of 7-bit and 8-bit control characters are equiva-
|
|
lent:
|
|
|
|
ESC D
|
|
Index (IND is 0x84).
|
|
ESC E
|
|
Next Line (NEL is 0x85).
|
|
ESC H
|
|
Tab Set (HTS is 0x88).
|
|
ESC M
|
|
Reverse Index (RI is 0x8d).
|
|
ESC N
|
|
Single Shift Select of G2 Character Set (SS2 is 0x8e). This
|
|
affects next character only.
|
|
ESC O
|
|
Single Shift Select of G3 Character Set (SS3 is 0x8f). This
|
|
affects next character only.
|
|
ESC P
|
|
Device Control String (DCS is 0x90).
|
|
ESC V
|
|
Start of Guarded Area (SPA is 0x96).
|
|
ESC W
|
|
End of Guarded Area (EPA is 0x97).
|
|
ESC X
|
|
Start of String (SOS is 0x98).
|
|
ESC Z
|
|
Return Terminal ID (DECID is 0x9a). Obsolete form of CSI c (DA).
|
|
ESC [
|
|
Control Sequence Introducer (CSI is 0x9b).
|
|
ESC \
|
|
String Terminator (ST is 0x9c).
|
|
ESC ]
|
|
Operating System Command (OSC is 0x9d).
|
|
ESC ^
|
|
Privacy Message (PM is 0x9e).
|
|
ESC _
|
|
Application Program Command (APC is 0x9f).
|
|
|
|
These control characters are used in the vtXXX emulation.
|
|
|
|
VT100 Mode
|
|
Most of these control sequences are standard VT102 control sequences,
|
|
but there is support for later DEC VT terminals (i.e., VT220, VT320,
|
|
VT420), as well as ISO 6429 and aixterm color controls. The only VT102
|
|
feature not supported is auto-repeat, since the only way X provides for
|
|
this will affect all windows. There are additional control sequences to
|
|
provide xterm-dependent functions, such as the scrollbar or window size.
|
|
Where the function is specified by DEC or ISO 6429, the code assigned to
|
|
it is given in parentheses. The escape codes to designate and invoke
|
|
character sets are specified by ISO 2022; see that document for a dis-
|
|
cussion of character sets.
|
|
|
|
Single-character functions
|
|
BEL Bell (Ctrl-G).
|
|
BS Backspace (Ctrl-H).
|
|
CR Carriage Return (Ctrl-M).
|
|
ENQ Return Terminal Status (Ctrl-E). Default response is an empty
|
|
string, but may be overridden by a resource answerbackString.
|
|
FF Form Feed or New Page (NP). Ctrl-L is treated the same as LF.
|
|
LF Line Feed or New Line (NL). (LF is Ctrl-J).
|
|
SI Shift In (Ctrl-O) -> Switch to Standard Character Set. This
|
|
invokes the G0 character set (the default).
|
|
SO Shift Out (Ctrl-N) -> Switch to Alternate Character Set. This
|
|
invokes the G1 character set.
|
|
SP Space.
|
|
TAB Horizontal Tab (HT) (Ctrl-I).
|
|
VT Vertical Tab (Ctrl-K). This is treated the same as LF.
|
|
|
|
Controls beginning with ESC
|
|
This excludes controls where ESC is part of a 7-bit equivalent to 8-bit
|
|
C1 controls, ordered by the final character(s).
|
|
ESC SP F 7-bit controls (S7C1T).
|
|
ESC SP G 8-bit controls (S8C1T).
|
|
ESC SP L Set ANSI conformance level 1 (dpANS X3.134.1).
|
|
ESC SP M Set ANSI conformance level 2 (dpANS X3.134.1).
|
|
ESC SP N Set ANSI conformance level 3 (dpANS X3.134.1).
|
|
ESC # 3 DEC double-height line, top half (DECDHL).
|
|
ESC # 4 DEC double-height line, bottom half (DECDHL).
|
|
ESC # 5 DEC single-width line (DECSWL).
|
|
ESC # 6 DEC double-width line (DECDWL).
|
|
ESC # 8 DEC Screen Alignment Test (DECALN).
|
|
ESC % @ Select default character set. That is ISO 8859-1 (ISO 2022).
|
|
ESC % G Select UTF-8 character set (ISO 2022).
|
|
ESC ( C Designate G0 Character Set (ISO 2022, VT100).
|
|
Final character C for designating 94-character sets. In this
|
|
list, 0 , A and B apply to VT100 and up, the remainder to
|
|
VT220 and up:
|
|
C = 0 -> DEC Special Character and Line Drawing Set.
|
|
C = A -> United Kingdom (UK).
|
|
C = B -> United States (USASCII).
|
|
C = 4 -> Dutch.
|
|
C = C or 5 -> Finnish.
|
|
C = R -> French.
|
|
C = Q -> French Canadian.
|
|
C = K -> German.
|
|
C = Y -> Italian.
|
|
C = E or 6 -> Norwegian/Danish.
|
|
C = Z -> Spanish.
|
|
C = H or 7 -> Swedish.
|
|
C = = -> Swiss.
|
|
ESC ) C Designate G1 Character Set (ISO 2022, VT100).
|
|
The same character sets apply as for ESC ( C.
|
|
ESC * C Designate G2 Character Set (ISO 2022, VT220).
|
|
The same character sets apply as for ESC ( C.
|
|
ESC + C Designate G3 Character Set (ISO 2022, VT220).
|
|
The same character sets apply as for ESC ( C.
|
|
ESC - C Designate G1 Character Set (VT300).
|
|
The same character sets apply as for ESC ( C.
|
|
ESC . C Designate G2 Character Set (VT300).
|
|
The same character sets apply as for ESC ( C.
|
|
ESC / C Designate G3 Character Set (VT300).
|
|
These work for 96-character sets only.
|
|
C = A -> ISO Latin-1 Supplemental.
|
|
ESC 7 Save Cursor (DECSC).
|
|
ESC 8 Restore Cursor (DECRC).
|
|
ESC = Application Keypad (DECPAM).
|
|
ESC > Normal Keypad (DECPNM).
|
|
ESC F Cursor to lower left corner of screen. This is enabled by the
|
|
hpLowerleftBugCompat resource.
|
|
ESC c Full Reset (RIS).
|
|
ESC l Memory Lock (per HP terminals). Locks memory above the cur-
|
|
sor.
|
|
ESC m Memory Unlock (per HP terminals).
|
|
ESC n Invoke the G2 Character Set as GL (LS2).
|
|
ESC o Invoke the G3 Character Set as GL (LS3).
|
|
ESC | Invoke the G3 Character Set as GR (LS3R).
|
|
ESC } Invoke the G2 Character Set as GR (LS2R).
|
|
ESC ~ Invoke the G1 Character Set as GR (LS1R).
|
|
|
|
Application Program-Control functions
|
|
APC Pt ST None. xterm implements no APC functions; Pt is ignored. Pt
|
|
need not be printable characters.
|
|
|
|
Device-Control functions
|
|
DCS Ps; Ps| Pt ST
|
|
User-Defined Keys (DECUDK). The first parameter:
|
|
Ps = 0 -> Clear all UDK definitions before starting
|
|
(default).
|
|
Ps = 1 -> Erase Below (default).
|
|
The second parameter:
|
|
Ps = 0 <- Lock the keys (default).
|
|
Ps = 1 <- Do not lock.
|
|
The third parameter is a ';'-separated list of strings denot-
|
|
ing the key-code separated by a '/' from the hex-encoded key
|
|
value. The key codes correspond to the DEC function-key codes
|
|
(e.g., F6=17).
|
|
DCS $ q Pt ST
|
|
Request Status String (DECRQSS). The string following the "q"
|
|
is one of the following:
|
|
" q -> DECSCA
|
|
" p -> DECSCL
|
|
r -> DECSTBM
|
|
m -> SGR
|
|
xterm responds with DCS 1 $ r Pt ST for valid requests,
|
|
replacing the Pt with the corresponding CSI string, or DCS 0 $
|
|
r Pt ST for invalid requests.
|
|
DCS + p Pt ST
|
|
Set Termcap/Terminfo Data (xterm, experimental). The string
|
|
following the "p" is a name to use for retrieving data from
|
|
the terminal database. The data will be used for the "tcap"
|
|
keyboard configuration's function- and special-keys, as well
|
|
as by the Request Termcap/Terminfo String control.
|
|
DCS + q Pt ST
|
|
Request Termcap/Terminfo String (xterm, experimental). The
|
|
string following the "q" is a list of names encoded in hex-
|
|
adecimal (2 digits per character) separated by ; which corre-
|
|
spond to termcap or terminfo key names.
|
|
Two special features are also recognized, which are not key
|
|
names: Co for termcap colors (or colors for terminfo colors),
|
|
and TN for termcap name (or name for terminfo name).
|
|
xterm responds with DCS 1 + r Pt ST for valid requests, adding
|
|
to Pt an = , and the value of the corresponding string that
|
|
xterm would send, or DCS 0 + r Pt ST for invalid requests.
|
|
The strings are encoded in hexadecimal (2 digits per charac-
|
|
ter).
|
|
|
|
Functions using CSI , ordered by the final character(s)
|
|
CSI Ps @ Insert Ps (Blank) Character(s) (default = 1) (ICH).
|
|
CSI Ps A Cursor Up Ps Times (default = 1) (CUU).
|
|
CSI Ps B Cursor Down Ps Times (default = 1) (CUD).
|
|
CSI Ps C Cursor Forward Ps Times (default = 1) (CUF).
|
|
CSI Ps D Cursor Backward Ps Times (default = 1) (CUB).
|
|
CSI Ps E Cursor Next Line Ps Times (default = 1) (CNL).
|
|
CSI Ps F Cursor Preceding Line Ps Times (default = 1) (CPL).
|
|
CSI Ps G Cursor Character Absolute [column] (default = [row,1]) (CHA).
|
|
CSI Ps ; Ps H
|
|
Cursor Position [row;column] (default = [1,1]) (CUP).
|
|
CSI Ps I Cursor Forward Tabulation Ps tab stops (default = 1) (CHT).
|
|
CSI Ps J Erase in Display (ED).
|
|
Ps = 0 -> Erase Below (default).
|
|
Ps = 1 -> Erase Above.
|
|
Ps = 2 -> Erase All.
|
|
Ps = 3 -> Erase Saved Lines (xterm).
|
|
CSI ? Ps J
|
|
Erase in Display (DECSED).
|
|
Ps = 0 -> Selective Erase Below (default).
|
|
Ps = 1 -> Selective Erase Above.
|
|
Ps = 2 -> Selective Erase All.
|
|
CSI Ps K Erase in Line (EL).
|
|
Ps = 0 -> Erase to Right (default).
|
|
Ps = 1 -> Erase to Left.
|
|
Ps = 2 -> Erase All.
|
|
CSI ? Ps K
|
|
Erase in Line (DECSEL).
|
|
Ps = 0 -> Selective Erase to Right (default).
|
|
Ps = 1 -> Selective Erase to Left.
|
|
Ps = 2 -> Selective Erase All.
|
|
CSI Ps L Insert Ps Line(s) (default = 1) (IL).
|
|
CSI Ps M Delete Ps Line(s) (default = 1) (DL).
|
|
CSI Ps P Delete Ps Character(s) (default = 1) (DCH).
|
|
CSI Ps S Scroll up Ps lines (default = 1) (SU).
|
|
CSI Ps T Scroll down Ps lines (default = 1) (SD).
|
|
CSI Ps ; Ps ; Ps ; Ps ; Ps T
|
|
Initiate highlight mouse tracking. Parameters are
|
|
[func;startx;starty;firstrow;lastrow]. See the section Mouse
|
|
Tracking.
|
|
CSI > Ps; Ps T
|
|
Reset one or more features of the title modes to the default
|
|
value. Normally, "reset" disables the feature. It is possi-
|
|
ble to disable the ability to reset features by compiling a
|
|
different default for the title modes into xterm.
|
|
Ps = 0 -> Do not set window/icon labels using hexadecimal.
|
|
Ps = 1 -> Do not query window/icon labels using hexadeci-
|
|
mal.
|
|
Ps = 2 -> Do not set window/icon labels using UTF-8.
|
|
Ps = 3 -> Do not query window/icon labels using UTF-8.
|
|
(See discussion of "Title Modes").
|
|
CSI Ps X Erase Ps Character(s) (default = 1) (ECH).
|
|
CSI Ps Z Cursor Backward Tabulation Ps tab stops (default = 1) (CBT).
|
|
CSI Pm ` Character Position Absolute [column] (default = [row,1])
|
|
(HPA).
|
|
CSI Ps b Repeat the preceding graphic character Ps times (REP).
|
|
CSI Ps c Send Device Attributes (Primary DA).
|
|
Ps = 0 or omitted -> request attributes from terminal. The
|
|
response depends on the decTerminalID resource setting.
|
|
-> CSI ? 1 ; 2 c (``VT100 with Advanced Video Option'')
|
|
-> CSI ? 1 ; 0 c (``VT101 with No Options'')
|
|
-> CSI ? 6 c (``VT102'')
|
|
-> CSI ? 6 0 ; 1 ; 2 ; 6 ; 8 ; 9 ; 1 5 ; c (``VT220'')
|
|
The VT100-style response parameters do not mean anything by
|
|
themselves. VT220 parameters do, telling the host what fea-
|
|
tures the terminal supports:
|
|
Ps = 1 -> 132-columns.
|
|
Ps = 2 -> Printer.
|
|
Ps = 6 -> Selective erase.
|
|
Ps = 8 -> User-defined keys.
|
|
Ps = 9 -> National replacement character sets.
|
|
Ps = 1 5 -> Technical characters.
|
|
Ps = 2 2 -> ANSI color, e.g., VT525.
|
|
Ps = 2 9 -> ANSI text locator (i.e., DEC Locator mode).
|
|
CSI > Ps c
|
|
Send Device Attributes (Secondary DA).
|
|
Ps = 0 or omitted -> request the terminal's identification
|
|
code. The response depends on the decTerminalID resource set-
|
|
ting. It should apply only to VT220 and up, but xterm extends
|
|
this to VT100.
|
|
-> CSI > Pp ; Pv ; Pc c
|
|
where Pp denotes the terminal type
|
|
Pp = 0 -> ``VT100''.
|
|
Pp = 1 -> ``VT220''.
|
|
and Pv is the firmware version (for xterm, this was originally
|
|
the XFree86 patch number, starting with 95). In a DEC termi-
|
|
nal, Pc indicates the ROM cartridge registration number and is
|
|
always zero.
|
|
CSI Pm d Line Position Absolute [row] (default = [1,column]) (VPA).
|
|
CSI Ps ; Ps f
|
|
Horizontal and Vertical Position [row;column] (default =
|
|
[1,1]) (HVP).
|
|
CSI Ps g Tab Clear (TBC).
|
|
Ps = 0 -> Clear Current Column (default).
|
|
Ps = 3 -> Clear All.
|
|
CSI Pm h Set Mode (SM).
|
|
Ps = 2 -> Keyboard Action Mode (AM).
|
|
Ps = 4 -> Insert Mode (IRM).
|
|
Ps = 1 2 -> Send/receive (SRM).
|
|
Ps = 2 0 -> Automatic Newline (LNM).
|
|
CSI ? Pm h
|
|
DEC Private Mode Set (DECSET).
|
|
Ps = 1 -> Application Cursor Keys (DECCKM).
|
|
Ps = 2 -> Designate USASCII for character sets G0-G3
|
|
(DECANM), and set VT100 mode.
|
|
Ps = 3 -> 132 Column Mode (DECCOLM).
|
|
Ps = 4 -> Smooth (Slow) Scroll (DECSCLM).
|
|
Ps = 5 -> Reverse Video (DECSCNM).
|
|
Ps = 6 -> Origin Mode (DECOM).
|
|
Ps = 7 -> Wraparound Mode (DECAWM).
|
|
Ps = 8 -> Auto-repeat Keys (DECARM).
|
|
Ps = 9 -> Send Mouse X & Y on button press. See the sec-
|
|
tion Mouse Tracking.
|
|
Ps = 1 0 -> Show toolbar (rxvt).
|
|
Ps = 1 2 -> Start Blinking Cursor (att610).
|
|
Ps = 1 8 -> Print form feed (DECPFF).
|
|
Ps = 1 9 -> Set print extent to full screen (DECPEX).
|
|
Ps = 2 5 -> Show Cursor (DECTCEM).
|
|
Ps = 3 0 -> Show scrollbar (rxvt).
|
|
Ps = 3 5 -> Enable font-shifting functions (rxvt).
|
|
Ps = 3 8 -> Enter Tektronix Mode (DECTEK).
|
|
Ps = 4 0 -> Allow 80 -> 132 Mode.
|
|
Ps = 4 1 -> more(1) fix (see curses resource).
|
|
Ps = 4 2 -> Enable Nation Replacement Character sets (DECN-
|
|
RCM).
|
|
Ps = 4 4 -> Turn On Margin Bell.
|
|
Ps = 4 5 -> Reverse-wraparound Mode.
|
|
Ps = 4 6 -> Start Logging. This is normally disabled by a
|
|
compile-time option.
|
|
Ps = 4 7 -> Use Alternate Screen Buffer. (This may be dis-
|
|
abled by the titeInhibit resource).
|
|
Ps = 6 6 -> Application keypad (DECNKM).
|
|
Ps = 6 7 -> Backarrow key sends backspace (DECBKM).
|
|
Ps = 1 0 0 0 -> Send Mouse X & Y on button press and
|
|
release. See the section Mouse Tracking.
|
|
Ps = 1 0 0 1 -> Use Hilite Mouse Tracking.
|
|
Ps = 1 0 0 2 -> Use Cell Motion Mouse Tracking.
|
|
Ps = 1 0 0 3 -> Use All Motion Mouse Tracking.
|
|
Ps = 1 0 0 4 -> Send FocusIn/FocusOut events.
|
|
Ps = 1 0 0 5 -> Enable Extended Mouse Mode.
|
|
Ps = 1 0 1 0 -> Scroll to bottom on tty output (rxvt).
|
|
Ps = 1 0 1 1 -> Scroll to bottom on key press (rxvt).
|
|
Ps = 1 0 3 4 -> Interpret "meta" key, sets eighth bit.
|
|
(enables the eightBitInput resource).
|
|
Ps = 1 0 3 5 -> Enable special modifiers for Alt and Num-
|
|
Lock keys. (This enables the numLock resource).
|
|
Ps = 1 0 3 6 -> Send ESC when Meta modifies a key. (This
|
|
enables the metaSendsEscape resource).
|
|
Ps = 1 0 3 7 -> Send DEL from the editing-keypad Delete
|
|
key.
|
|
Ps = 1 0 3 9 -> Send ESC when Alt modifies a key. (This
|
|
enables the altSendsEscape resource).
|
|
Ps = 1 0 4 0 -> Keep selection even if not highlighted.
|
|
(This enables the keepSelection resource).
|
|
Ps = 1 0 4 1 -> Use the CLIPBOARD selection. (This enables
|
|
the selectToClipboard resource).
|
|
Ps = 1 0 4 2 -> Enable Urgency window manager hint when
|
|
Control-G is received. (This enables the bellIsUrgent
|
|
resource).
|
|
Ps = 1 0 4 3 -> Enable raising of the window when Control-G
|
|
is received. (enables the popOnBell resource).
|
|
Ps = 1 0 4 7 -> Use Alternate Screen Buffer. (This may be
|
|
disabled by the titeInhibit resource).
|
|
Ps = 1 0 4 8 -> Save cursor as in DECSC. (This may be dis-
|
|
abled by the titeInhibit resource).
|
|
Ps = 1 0 4 9 -> Save cursor as in DECSC and use Alternate
|
|
Screen Buffer, clearing it first. (This may be disabled by
|
|
the titeInhibit resource). This combines the effects of the 1
|
|
0 4 7 and 1 0 4 8 modes. Use this with terminfo-based
|
|
applications rather than the 4 7 mode.
|
|
Ps = 1 0 5 0 -> Set terminfo/termcap function-key mode.
|
|
Ps = 1 0 5 1 -> Set Sun function-key mode.
|
|
Ps = 1 0 5 2 -> Set HP function-key mode.
|
|
Ps = 1 0 5 3 -> Set SCO function-key mode.
|
|
Ps = 1 0 6 0 -> Set legacy keyboard emulation (X11R6).
|
|
Ps = 1 0 6 1 -> Set VT220 keyboard emulation.
|
|
Ps = 2 0 0 4 -> Set bracketed paste mode.
|
|
CSI Pm i Media Copy (MC).
|
|
Ps = 0 -> Print screen (default).
|
|
Ps = 4 -> Turn off printer controller mode.
|
|
Ps = 5 -> Turn on printer controller mode.
|
|
CSI ? Pm i
|
|
Media Copy (MC, DEC-specific).
|
|
Ps = 1 -> Print line containing cursor.
|
|
Ps = 4 -> Turn off autoprint mode.
|
|
Ps = 5 -> Turn on autoprint mode.
|
|
Ps = 1 0 -> Print composed display, ignores DECPEX.
|
|
Ps = 1 1 -> Print all pages.
|
|
CSI Pm l Reset Mode (RM).
|
|
Ps = 2 -> Keyboard Action Mode (AM).
|
|
Ps = 4 -> Replace Mode (IRM).
|
|
Ps = 1 2 -> Send/receive (SRM).
|
|
Ps = 2 0 -> Normal Linefeed (LNM).
|
|
CSI ? Pm l
|
|
DEC Private Mode Reset (DECRST).
|
|
Ps = 1 -> Normal Cursor Keys (DECCKM).
|
|
Ps = 2 -> Designate VT52 mode (DECANM).
|
|
Ps = 3 -> 80 Column Mode (DECCOLM).
|
|
Ps = 4 -> Jump (Fast) Scroll (DECSCLM).
|
|
Ps = 5 -> Normal Video (DECSCNM).
|
|
Ps = 6 -> Normal Cursor Mode (DECOM).
|
|
Ps = 7 -> No Wraparound Mode (DECAWM).
|
|
Ps = 8 -> No Auto-repeat Keys (DECARM).
|
|
Ps = 9 -> Don't send Mouse X & Y on button press.
|
|
Ps = 1 0 -> Hide toolbar (rxvt).
|
|
Ps = 1 2 -> Stop Blinking Cursor (att610).
|
|
Ps = 1 8 -> Don't print form feed (DECPFF).
|
|
Ps = 1 9 -> Limit print to scrolling region (DECPEX).
|
|
Ps = 2 5 -> Hide Cursor (DECTCEM).
|
|
Ps = 3 0 -> Don't show scrollbar (rxvt).
|
|
Ps = 3 5 -> Disable font-shifting functions (rxvt).
|
|
Ps = 4 0 -> Disallow 80 -> 132 Mode.
|
|
Ps = 4 1 -> No more(1) fix (see curses resource).
|
|
Ps = 4 2 -> Disable Nation Replacement Character sets (DEC-
|
|
NRCM).
|
|
Ps = 4 4 -> Turn Off Margin Bell.
|
|
Ps = 4 5 -> No Reverse-wraparound Mode.
|
|
Ps = 4 6 -> Stop Logging. (This is normally disabled by a
|
|
compile-time option).
|
|
Ps = 4 7 -> Use Normal Screen Buffer.
|
|
Ps = 6 6 -> Numeric keypad (DECNKM).
|
|
Ps = 6 7 -> Backarrow key sends delete (DECBKM).
|
|
Ps = 1 0 0 0 -> Don't send Mouse X & Y on button press and
|
|
release. See the section Mouse Tracking.
|
|
Ps = 1 0 0 1 -> Don't use Hilite Mouse Tracking.
|
|
Ps = 1 0 0 2 -> Don't use Cell Motion Mouse Tracking.
|
|
Ps = 1 0 0 3 -> Don't use All Motion Mouse Tracking.
|
|
Ps = 1 0 0 4 -> Don't send FocusIn/FocusOut events.
|
|
Ps = 1 0 0 5 -> Disable Extended Mouse Mode.
|
|
Ps = 1 0 1 0 -> Don't scroll to bottom on tty output
|
|
(rxvt).
|
|
Ps = 1 0 1 1 -> Don't scroll to bottom on key press (rxvt).
|
|
Ps = 1 0 3 4 -> Don't interpret "meta" key. (This disables
|
|
the eightBitInput resource).
|
|
Ps = 1 0 3 5 -> Disable special modifiers for Alt and Num-
|
|
Lock keys. (This disables the numLock resource).
|
|
Ps = 1 0 3 6 -> Don't send ESC when Meta modifies a key.
|
|
(This disables the metaSendsEscape resource).
|
|
Ps = 1 0 3 7 -> Send VT220 Remove from the editing-keypad
|
|
Delete key.
|
|
Ps = 1 0 3 9 -> Don't send ESC when Alt modifies a key.
|
|
(This disables the altSendsEscape resource).
|
|
Ps = 1 0 4 0 -> Do not keep selection when not highlighted.
|
|
(This disables the keepSelection resource).
|
|
Ps = 1 0 4 1 -> Use the PRIMARY selection. (This disables
|
|
the selectToClipboard resource).
|
|
Ps = 1 0 4 2 -> Disable Urgency window manager hint when
|
|
Control-G is received. (This disables the bellIsUrgent
|
|
resource).
|
|
Ps = 1 0 4 3 -> Disable raising of the window when Control-
|
|
G is received. (This disables the popOnBell resource).
|
|
Ps = 1 0 4 7 -> Use Normal Screen Buffer, clearing screen
|
|
first if in the Alternate Screen. (This may be disabled by
|
|
the titeInhibit resource).
|
|
Ps = 1 0 4 8 -> Restore cursor as in DECRC. (This may be
|
|
disabled by the titeInhibit resource).
|
|
Ps = 1 0 4 9 -> Use Normal Screen Buffer and restore cursor
|
|
as in DECRC. (This may be disabled by the titeInhibit
|
|
resource). This combines the effects of the 1 0 4 7 and 1 0
|
|
4 8 modes. Use this with terminfo-based applications rather
|
|
than the 4 7 mode.
|
|
Ps = 1 0 5 0 -> Reset terminfo/termcap function-key mode.
|
|
Ps = 1 0 5 1 -> Reset Sun function-key mode.
|
|
Ps = 1 0 5 2 -> Reset HP function-key mode.
|
|
Ps = 1 0 5 3 -> Reset SCO function-key mode.
|
|
Ps = 1 0 6 0 -> Reset legacy keyboard emulation (X11R6).
|
|
Ps = 1 0 6 1 -> Reset keyboard emulation to Sun/PC style.
|
|
Ps = 2 0 0 4 -> Reset bracketed paste mode.
|
|
CSI Pm m Character Attributes (SGR).
|
|
Ps = 0 -> Normal (default).
|
|
Ps = 1 -> Bold.
|
|
Ps = 4 -> Underlined.
|
|
Ps = 5 -> Blink (appears as Bold).
|
|
Ps = 7 -> Inverse.
|
|
Ps = 8 -> Invisible, i.e., hidden (VT300).
|
|
Ps = 2 2 -> Normal (neither bold nor faint).
|
|
Ps = 2 4 -> Not underlined.
|
|
Ps = 2 5 -> Steady (not blinking).
|
|
Ps = 2 7 -> Positive (not inverse).
|
|
Ps = 2 8 -> Visible, i.e., not hidden (VT300).
|
|
Ps = 3 0 -> Set foreground color to Black.
|
|
Ps = 3 1 -> Set foreground color to Red.
|
|
Ps = 3 2 -> Set foreground color to Green.
|
|
Ps = 3 3 -> Set foreground color to Yellow.
|
|
Ps = 3 4 -> Set foreground color to Blue.
|
|
Ps = 3 5 -> Set foreground color to Magenta.
|
|
Ps = 3 6 -> Set foreground color to Cyan.
|
|
Ps = 3 7 -> Set foreground color to White.
|
|
Ps = 3 9 -> Set foreground color to default (original).
|
|
Ps = 4 0 -> Set background color to Black.
|
|
Ps = 4 1 -> Set background color to Red.
|
|
Ps = 4 2 -> Set background color to Green.
|
|
Ps = 4 3 -> Set background color to Yellow.
|
|
Ps = 4 4 -> Set background color to Blue.
|
|
Ps = 4 5 -> Set background color to Magenta.
|
|
Ps = 4 6 -> Set background color to Cyan.
|
|
Ps = 4 7 -> Set background color to White.
|
|
Ps = 4 9 -> Set background color to default (original).
|
|
|
|
If 16-color support is compiled, the following apply. Assume
|
|
that xterm's resources are set so that the ISO color codes are
|
|
the first 8 of a set of 16. Then the aixterm colors are the
|
|
bright versions of the ISO colors:
|
|
Ps = 9 0 -> Set foreground color to Black.
|
|
Ps = 9 1 -> Set foreground color to Red.
|
|
Ps = 9 2 -> Set foreground color to Green.
|
|
Ps = 9 3 -> Set foreground color to Yellow.
|
|
Ps = 9 4 -> Set foreground color to Blue.
|
|
Ps = 9 5 -> Set foreground color to Magenta.
|
|
Ps = 9 6 -> Set foreground color to Cyan.
|
|
Ps = 9 7 -> Set foreground color to White.
|
|
Ps = 1 0 0 -> Set background color to Black.
|
|
Ps = 1 0 1 -> Set background color to Red.
|
|
Ps = 1 0 2 -> Set background color to Green.
|
|
Ps = 1 0 3 -> Set background color to Yellow.
|
|
Ps = 1 0 4 -> Set background color to Blue.
|
|
Ps = 1 0 5 -> Set background color to Magenta.
|
|
Ps = 1 0 6 -> Set background color to Cyan.
|
|
Ps = 1 0 7 -> Set background color to White.
|
|
|
|
If xterm is compiled with the 16-color support disabled, it
|
|
supports the following, from rxvt:
|
|
Ps = 1 0 0 -> Set foreground and background color to
|
|
default.
|
|
|
|
If 88- or 256-color support is compiled, the following apply.
|
|
Ps = 3 8 ; 5 ; Ps -> Set foreground color to the second
|
|
Ps.
|
|
Ps = 4 8 ; 5 ; Ps -> Set background color to the second
|
|
Ps.
|
|
|
|
CSI > Ps; Ps m
|
|
Set or reset resource-values used by xterm to decide whether
|
|
to construct escape sequences holding information about the
|
|
modifiers pressed with a given key. The first parameter iden-
|
|
tifies the resource to set/reset. The second parameter is the
|
|
value to assign to the resource. If the second parameter is
|
|
omitted, the resource is reset to its initial value.
|
|
Ps = 1 -> modifyCursorKeys.
|
|
Ps = 2 -> modifyFunctionKeys.
|
|
Ps = 4 -> modifyOtherKeys.
|
|
If no parameters are given, all resources are reset to their
|
|
initial values.
|
|
CSI Ps n Device Status Report (DSR).
|
|
Ps = 5 -> Status Report. Result (``OK'') is
|
|
CSI 0 n
|
|
Ps = 6 -> Report Cursor Position (CPR) [row;column].
|
|
Result is
|
|
CSI r ; c R
|
|
CSI > Ps n
|
|
Disable modifiers which may be enabled via the CSI > Ps; Ps m
|
|
sequence. This corresponds to a resource value of "-1", which
|
|
cannot be set with the other sequence. The parameter identi-
|
|
fies the resource to be disabled:
|
|
Ps = 1 -> modifyCursorKeys.
|
|
Ps = 2 -> modifyFunctionKeys.
|
|
Ps = 4 -> modifyOtherKeys.
|
|
If the parameter is omitted, modifyFunctionKeys is disabled.
|
|
When modifyFunctionKeys is disabled, xterm uses the modifier
|
|
keys to make an extended sequence of functions rather than
|
|
adding a parameter to each function key to denote the modi-
|
|
fiers.
|
|
CSI ? Ps n
|
|
Device Status Report (DSR, DEC-specific).
|
|
Ps = 6 -> Report Cursor Position (CPR) [row;column] as CSI
|
|
? r ; c R (assumes page is zero).
|
|
Ps = 1 5 -> Report Printer status as CSI ? 1 0 n (ready).
|
|
or CSI ? 1 1 n (not ready).
|
|
Ps = 2 5 -> Report UDK status as CSI ? 2 0 n (unlocked)
|
|
or CSI ? 2 1 n (locked).
|
|
Ps = 2 6 -> Report Keyboard status as
|
|
CSI ? 2 7 ; 1 ; 0 ; 0 n (North American).
|
|
The last two parameters apply to VT400 & up, and denote key-
|
|
board ready and LK01 respectively.
|
|
Ps = 5 3 -> Report Locator status as
|
|
CSI ? 5 3 n Locator available, if compiled-in, or
|
|
CSI ? 5 0 n No Locator, if not.
|
|
CSI > Ps p
|
|
Set resource value pointerMode. This is used by xterm to
|
|
decide whether to hide the pointer cursor as the user types.
|
|
Valid values for the parameter:
|
|
Ps = 0 -> never hide the pointer.
|
|
Ps = 1 -> hide if the mouse tracking mode is not enabled.
|
|
Ps = 2 -> always hide the pointer. If no parameter is
|
|
given, xterm uses the default, which is 1 .
|
|
CSI ! p Soft terminal reset (DECSTR).
|
|
CSI Ps$ p
|
|
Request ANSI mode (DECRQM). For VT300 and up, reply is
|
|
CSI Ps; Pm$ y
|
|
where Ps is the mode number as in RM, and Pm is the mode
|
|
value:
|
|
0 - not recognized
|
|
1 - set
|
|
2 - reset
|
|
3 - permanently set
|
|
4 - permanently reset
|
|
CSI ? Ps$ p
|
|
Request DEC private mode (DECRQM). For VT300 and up, reply is
|
|
CSI ? Ps; Pm$ p
|
|
where Ps is the mode number as in DECSET, Pm is the mode value
|
|
as in the ANSI DECRQM.
|
|
CSI Ps ; Ps " p
|
|
Set conformance level (DECSCL). Valid values for the first
|
|
parameter:
|
|
Ps = 6 1 -> VT100.
|
|
Ps = 6 2 -> VT200.
|
|
Ps = 6 3 -> VT300.
|
|
Valid values for the second parameter:
|
|
Ps = 0 -> 8-bit controls.
|
|
Ps = 1 -> 7-bit controls (always set for VT100).
|
|
Ps = 2 -> 8-bit controls.
|
|
CSI Ps q Load LEDs (DECLL).
|
|
Ps = 0 -> Clear all LEDS (default).
|
|
Ps = 1 -> Light Num Lock.
|
|
Ps = 2 -> Light Caps Lock.
|
|
Ps = 3 -> Light Scroll Lock.
|
|
Ps = 2 1 -> Extinguish Num Lock.
|
|
Ps = 2 2 -> Extinguish Caps Lock.
|
|
Ps = 2 3 -> Extinguish Scroll Lock.
|
|
CSI Ps SP q
|
|
Set cursor style (DECSCUSR, VT520).
|
|
Ps = 0 -> blinking block.
|
|
Ps = 1 -> blinking block (default).
|
|
Ps = 2 -> steady block.
|
|
Ps = 3 -> blinking underline.
|
|
Ps = 4 -> steady underline.
|
|
CSI Ps " q
|
|
Select character protection attribute (DECSCA). Valid values
|
|
for the parameter:
|
|
Ps = 0 -> DECSED and DECSEL can erase (default).
|
|
Ps = 1 -> DECSED and DECSEL cannot erase.
|
|
Ps = 2 -> DECSED and DECSEL can erase.
|
|
CSI Ps ; Ps r
|
|
Set Scrolling Region [top;bottom] (default = full size of win-
|
|
dow) (DECSTBM).
|
|
CSI ? Pm r
|
|
Restore DEC Private Mode Values. The value of Ps previously
|
|
saved is restored. Ps values are the same as for DECSET.
|
|
CSI Pt; Pl; Pb; Pr; Ps$ r
|
|
Change Attributes in Rectangular Area (DECCARA), VT400 and up.
|
|
Pt; Pl; Pb; Pr denotes the rectangle.
|
|
Ps denotes the SGR attributes to change: 0, 1, 4, 5, 7.
|
|
CSI s Save cursor (ANSI.SYS).
|
|
CSI ? Pm s
|
|
Save DEC Private Mode Values. Ps values are the same as for
|
|
DECSET.
|
|
CSI Ps ; Ps ; Ps t
|
|
Window manipulation (from dtterm, as well as extensions).
|
|
These controls may be disabled using the allowWindowOps
|
|
resource. Valid values for the first (and any additional
|
|
parameters) are:
|
|
Ps = 1 -> De-iconify window.
|
|
Ps = 2 -> Iconify window.
|
|
Ps = 3 ; x ; y -> Move window to [x, y].
|
|
Ps = 4 ; height ; width -> Resize the xterm window to
|
|
height and width in pixels.
|
|
Ps = 5 -> Raise the xterm window to the front of the stack-
|
|
ing order.
|
|
Ps = 6 -> Lower the xterm window to the bottom of the
|
|
stacking order.
|
|
Ps = 7 -> Refresh the xterm window.
|
|
Ps = 8 ; height ; width -> Resize the text area to
|
|
[height;width] in characters.
|
|
Ps = 9 ; 0 -> Restore maximized window.
|
|
Ps = 9 ; 1 -> Maximize window (i.e., resize to screen
|
|
size).
|
|
Ps = 1 0 ; 0 -> Undo full-screen mode.
|
|
Ps = 1 0 ; 1 -> Change to full-screen.
|
|
Ps = 1 1 -> Report xterm window state. If the xterm window
|
|
is open (non-iconified), it returns CSI 1 t . If the xterm
|
|
window is iconified, it returns CSI 2 t .
|
|
Ps = 1 3 -> Report xterm window position. Result is CSI 3
|
|
; x ; y t
|
|
Ps = 1 4 -> Report xterm window in pixels. Result is CSI
|
|
4 ; height ; width t
|
|
Ps = 1 8 -> Report the size of the text area in characters.
|
|
Result is CSI 8 ; height ; width t
|
|
Ps = 1 9 -> Report the size of the screen in characters.
|
|
Result is CSI 9 ; height ; width t
|
|
Ps = 2 0 -> Report xterm window's icon label. Result is
|
|
OSC L label ST
|
|
Ps = 2 1 -> Report xterm window's title. Result is OSC l
|
|
label ST
|
|
Ps = 2 2 ; 0 -> Save xterm icon and window title on
|
|
stack.
|
|
Ps = 2 2 ; 1 -> Save xterm icon title on stack.
|
|
Ps = 2 2 ; 2 -> Save xterm window title on stack.
|
|
Ps = 2 3 ; 0 -> Restore xterm icon and window title from
|
|
stack.
|
|
Ps = 2 3 ; 1 -> Restore xterm icon title from stack.
|
|
Ps = 2 3 ; 2 -> Restore xterm window title from stack.
|
|
Ps >= 2 4 -> Resize to Ps lines (DECSLPP).
|
|
CSI Pt; Pl; Pb; Pr; Ps$ t
|
|
Reverse Attributes in Rectangular Area (DECRARA), VT400 and
|
|
up.
|
|
Pt; Pl; Pb; Pr denotes the rectangle.
|
|
Ps denotes the attributes to reverse, i.e., 1, 4, 5, 7.
|
|
CSI > Ps; Ps t
|
|
Set one or more features of the title modes. Each parameter
|
|
enables a single feature.
|
|
Ps = 0 -> Set window/icon labels using hexadecimal.
|
|
Ps = 1 -> Query window/icon labels using hexadecimal.
|
|
Ps = 2 -> Set window/icon labels using UTF-8.
|
|
Ps = 3 -> Query window/icon labels using UTF-8. (See dis-
|
|
cussion of "Title Modes")
|
|
CSI Ps SP t
|
|
Set warning-bell volume (DECSWBV, VT520).
|
|
Ps = 0 or 1 -> off.
|
|
Ps = 2 , 3 or 4 -> low.
|
|
Ps = 5 , 6 , 7 , or 8 -> high.
|
|
CSI u Restore cursor (ANSI.SYS).
|
|
CSI Ps SP u
|
|
Set margin-bell volume (DECSMBV, VT520).
|
|
Ps = 1 -> off.
|
|
Ps = 2 , 3 or 4 -> low.
|
|
Ps = 0 , 5 , 6 , 7 , or 8 -> high.
|
|
CSI Pt; Pl; Pb; Pr; Pp; Pt; Pl; Pp$ v
|
|
Copy Rectangular Area (DECCRA, VT400 and up).
|
|
Pt; Pl; Pb; Pr denotes the rectangle.
|
|
Pp denotes the source page.
|
|
Pt; Pl denotes the target location.
|
|
Pp denotes the target page.
|
|
CSI Pt ; Pl ; Pb ; Pr ' w
|
|
Enable Filter Rectangle (DECEFR), VT420 and up.
|
|
Parameters are [top;left;bottom;right].
|
|
Defines the coordinates of a filter rectangle and activates
|
|
it. Anytime the locator is detected outside of the filter
|
|
rectangle, an outside rectangle event is generated and the
|
|
rectangle is disabled. Filter rectangles are always treated
|
|
as "one-shot" events. Any parameters that are omitted default
|
|
to the current locator position. If all parameters are omit-
|
|
ted, any locator motion will be reported. DECELR always can-
|
|
cels any prevous rectangle definition.
|
|
CSI Ps x Request Terminal Parameters (DECREQTPARM).
|
|
if Ps is a "0" (default) or "1", and xterm is emulating VT100,
|
|
the control sequence elicits a response of the same form whose
|
|
parameters describe the terminal:
|
|
Ps -> the given Ps incremented by 2.
|
|
Pn = 1 <- no parity.
|
|
Pn = 1 <- eight bits.
|
|
Pn = 1 <- 2 8 transmit 38.4k baud.
|
|
Pn = 1 <- 2 8 receive 38.4k baud.
|
|
Pn = 1 <- clock multiplier.
|
|
Pn = 0 <- STP flags.
|
|
CSI Ps x Select Attribute Change Extent (DECSACE).
|
|
Ps = 0 -> from start to end position, wrapped.
|
|
Ps = 1 -> from start to end position, wrapped.
|
|
Ps = 2 -> rectangle (exact).
|
|
CSI Pc; Pt; Pl; Pb; Pr$ x
|
|
Fill Rectangular Area (DECFRA), VT420 and up.
|
|
Pc is the character to use.
|
|
Pt; Pl; Pb; Pr denotes the rectangle.
|
|
CSI Ps ; Pu ' z
|
|
Enable Locator Reporting (DECELR).
|
|
Valid values for the first parameter:
|
|
Ps = 0 -> Locator disabled (default).
|
|
Ps = 1 -> Locator enabled.
|
|
Ps = 2 -> Locator enabled for one report, then disabled.
|
|
The second parameter specifies the coordinate unit for locator
|
|
reports.
|
|
Valid values for the second parameter:
|
|
Pu = 0 <- or omitted -> default to character cells.
|
|
Pu = 1 <- device physical pixels.
|
|
Pu = 2 <- character cells.
|
|
CSI Pt; Pl; Pb; Pr$ z
|
|
Erase Rectangular Area (DECERA), VT400 and up.
|
|
Pt; Pl; Pb; Pr denotes the rectangle.
|
|
CSI Pm ' {
|
|
Select Locator Events (DECSLE).
|
|
Valid values for the first (and any additional parameters)
|
|
are:
|
|
Ps = 0 -> only respond to explicit host requests (DECRQLP).
|
|
(This is default). It also cancels any filter
|
|
rectangle.
|
|
Ps = 1 -> report button down transitions.
|
|
Ps = 2 -> do not report button down transitions.
|
|
Ps = 3 -> report button up transitions.
|
|
Ps = 4 -> do not report button up transitions.
|
|
CSI Pt; Pl; Pb; Pr$ {
|
|
Selective Erase Rectangular Area (DECSERA), VT400 and up.
|
|
Pt; Pl; Pb; Pr denotes the rectangle.
|
|
CSI Ps ' |
|
|
Request Locator Position (DECRQLP).
|
|
Valid values for the parameter are:
|
|
Ps = 0 , 1 or omitted -> transmit a single DECLRP locator
|
|
report.
|
|
|
|
If Locator Reporting has been enabled by a DECELR, xterm will
|
|
respond with a DECLRP Locator Report. This report is also
|
|
generated on button up and down events if they have been
|
|
enabled with a DECSLE, or when the locator is detected outside
|
|
of a filter rectangle, if filter rectangles have been enabled
|
|
with a DECEFR.
|
|
|
|
-> CSI Pe ; Pb ; Pr ; Pc ; Pp & w
|
|
|
|
Parameters are [event;button;row;column;page].
|
|
Valid values for the event:
|
|
Pe = 0 -> locator unavailable - no other parameters sent.
|
|
Pe = 1 -> request - xterm received a DECRQLP.
|
|
Pe = 2 -> left button down.
|
|
Pe = 3 -> left button up.
|
|
Pe = 4 -> middle button down.
|
|
Pe = 5 -> middle button up.
|
|
Pe = 6 -> right button down.
|
|
Pe = 7 -> right button up.
|
|
Pe = 8 -> M4 button down.
|
|
Pe = 9 -> M4 button up.
|
|
Pe = 1 0 -> locator outside filter rectangle.
|
|
``button'' parameter is a bitmask indicating which buttons are
|
|
pressed:
|
|
Pb = 0 <- no buttons down.
|
|
Pb & 1 <- right button down.
|
|
Pb & 2 <- middle button down.
|
|
Pb & 4 <- left button down.
|
|
Pb & 8 <- M4 button down.
|
|
``row'' and ``column'' parameters are the coordinates of the
|
|
locator position in the xterm window, encoded as ASCII deci-
|
|
mal.
|
|
The ``page'' parameter is not used by xterm, and will be omit-
|
|
ted.
|
|
|
|
Operating System Controls
|
|
OSC Ps ; Pt ST
|
|
OSC Ps ; Pt BEL
|
|
Set Text Parameters. For colors and font, if Pt is a "?", the
|
|
control sequence elicits a response which consists of the con-
|
|
trol sequence which would set the corresponding value. The
|
|
dtterm control sequences allow you to determine the icon name
|
|
and window title.
|
|
Ps = 0 -> Change Icon Name and Window Title to Pt.
|
|
Ps = 1 -> Change Icon Name to Pt.
|
|
Ps = 2 -> Change Window Title to Pt.
|
|
Ps = 3 -> Set X property on top-level window. Pt should be
|
|
in the form "prop=value", or just "prop" to delete the prop-
|
|
erty
|
|
Ps = 4 ; c ; spec -> Change Color Number c to the color
|
|
specified by spec. This can be a name or RGB specification as
|
|
per XParseColor. Any number of c name pairs may be given.
|
|
The color numbers correspond to the ANSI colors 0-7, their
|
|
bright versions 8-15, and if supported, the remainder of the
|
|
88-color or 256-color table.
|
|
|
|
If a "?" is given rather than a name or RGB specification,
|
|
xterm replies with a control sequence of the same form which
|
|
can be used to set the corresponding color. Because more than
|
|
one pair of color number and specification can be given in one
|
|
control sequence, xterm can make more than one reply.
|
|
|
|
Ps = 5 ; c ; spec -> Change Special Color Number c to the
|
|
color specified by spec. This can be a name or RGB specifica-
|
|
tion as per XParseColor. Any number of c name pairs may be
|
|
given. The special colors can also be set by adding the maxi-
|
|
mum number of colors to these codes in an OSC 4 control:
|
|
|
|
Pc = 0 <- resource colorBD (BOLD).
|
|
Pc = 1 <- resource colorUL (UNDERLINE).
|
|
Pc = 2 <- resource colorBL (BLINK).
|
|
Pc = 3 <- resource colorRV (REVERSE).
|
|
|
|
The 10 colors (below) which may be set or queried using 1 0
|
|
through 1 9 are denoted dynamic colors, since the correspond-
|
|
ing control sequences were the first means for setting xterm's
|
|
colors dynamically, i.e., after it was started. They are not
|
|
the same as the ANSI colors. These controls may be disabled
|
|
using the allowColorOps resource. At least one parameter is
|
|
expected for Pt. Each successive parameter changes the next
|
|
color in the list. The value of Ps tells the starting point
|
|
in the list. The colors are specified by name or RGB specifi-
|
|
cation as per XParseColor.
|
|
|
|
If a "?" is given rather than a name or RGB specification,
|
|
xterm replies with a control sequence of the same form which
|
|
can be used to set the corresponding dynamic color. Because
|
|
more than one pair of color number and specification can be
|
|
given in one control sequence, xterm can make more than one
|
|
reply.
|
|
|
|
Ps = 1 0 -> Change VT100 text foreground color to Pt.
|
|
Ps = 1 1 -> Change VT100 text background color to Pt.
|
|
Ps = 1 2 -> Change text cursor color to Pt.
|
|
Ps = 1 3 -> Change mouse foreground color to Pt.
|
|
Ps = 1 4 -> Change mouse background color to Pt.
|
|
Ps = 1 5 -> Change Tektronix foreground color to Pt.
|
|
Ps = 1 6 -> Change Tektronix background color to Pt.
|
|
Ps = 1 7 -> Change highlight background color to Pt.
|
|
Ps = 1 8 -> Change Tektronix cursor color to Pt.
|
|
Ps = 1 9 -> Change highlight foreground color to Pt.
|
|
|
|
Ps = 4 6 -> Change Log File to Pt. (This is normally dis-
|
|
abled by a compile-time option).
|
|
|
|
Ps = 5 0 -> Set Font to Pt. These controls may be disabled
|
|
using the allowFontOps resource. If Pt begins with a "#",
|
|
index in the font menu, relative (if the next character is a
|
|
plus or minus sign) or absolute. A number is expected but not
|
|
required after the sign (the default is the current entry for
|
|
relative, zero for absolute indexing).
|
|
The same rule (plus or minus sign, optional number) is used
|
|
when querying the font. The remainder of Pt is ignored.
|
|
A font can be specified after a "#" index expression, by
|
|
adding a space and then the font specifier.
|
|
If the "TrueType Fonts" menu entry is set (the renderFont
|
|
resource), then this control sets/queries the faceName
|
|
resource.
|
|
|
|
Ps = 5 1 (reserved for Emacs shell).
|
|
|
|
Ps = 5 2 -> Manipulate Selection Data. These controls may
|
|
be disabled using the allowWindowOps resource. The parameter
|
|
Pt is parsed as
|
|
Pc; Pd
|
|
The first, Pc, may contain zero or more characters from the
|
|
set c p s 0 1 2 3 4 5 6 7 . It is used to construct
|
|
a list of selection parameters for clipboard, primary, select,
|
|
or cut buffers 0 through 7 respectively, in the order given.
|
|
If the parameter is empty, xterm uses s 0 , to specify the
|
|
configurable primary/clipboard selection and cut buffer 0.
|
|
The second parameter, Pd, gives the selection data. Normally
|
|
this is a string encoded in base64. The data becomes the new
|
|
selection, which is then available for pasting by other appli-
|
|
cations.
|
|
If the second parameter is a ? , xterm replies to the host
|
|
with the selection data encoded using the same protocol.
|
|
If the second parameter is neither a base64 string nor ? ,
|
|
then the selection is cleared.
|
|
|
|
Ps = 1 0 4 ; c -> Reset Color Number c. It is reset to the
|
|
color specified by the corresponding X resource. Any number
|
|
of c parameters may be given. These parameters correspond to
|
|
the ANSI colors 0-7, their bright versions 8-15, and if sup-
|
|
ported, the remainder of the 88-color or 256-color table. If
|
|
no parameters are given, the entire table will be reset.
|
|
|
|
Ps = 1 0 5 ; c -> Reset Special Color Number c. It is
|
|
reset to the color specified by the corresponding X resource.
|
|
Any number of c parameters may be given. These parameters
|
|
correspond to the special colors which can be set using an OSC
|
|
5 control (or by adding the maximum number of colors using an
|
|
OSC 4 control).
|
|
|
|
The dynamic colors can also be reset to their default
|
|
(resource) values:
|
|
Ps = 1 1 0 -> Reset VT100 text foreground color.
|
|
Ps = 1 1 1 -> Reset VT100 text background color.
|
|
Ps = 1 1 2 -> Reset text cursor color.
|
|
Ps = 1 1 3 -> Reset mouse foreground color.
|
|
Ps = 1 1 4 -> Reset mouse background color.
|
|
Ps = 1 1 5 -> Reset Tektronix foreground color.
|
|
Ps = 1 1 6 -> Reset Tektronix background color.
|
|
Ps = 1 1 7 -> Reset highlight color.
|
|
Ps = 1 1 8 -> Reset Tektronix cursor color.
|
|
|
|
Privacy Message
|
|
PM Pt ST xterm implements no PM functions; Pt is ignored. Pt need not
|
|
be printable characters.
|
|
|
|
Alt and Meta Keys
|
|
Many keyboards have keys labeled "Alt". Few have keys labeled "Meta".
|
|
However, xterm's default translations use the Meta modifier. Common
|
|
keyboard configurations assign the Meta modifier to an "Alt" key. By
|
|
using xmodmap one may have the modifier assigned to a different key, and
|
|
have "real" alt and meta keys. Here is an example:
|
|
|
|
! put meta on mod3 to distinguish it from alt
|
|
keycode 64 = Alt_L
|
|
clear mod1
|
|
add mod1 = Alt_L
|
|
keycode 115 = Meta_L
|
|
clear mod3
|
|
add mod3 = Meta_L
|
|
|
|
|
|
The metaSendsEscape resource (and altSendsEscape if altIsNotMeta is set)
|
|
can be used to control the way the Meta modifier applies to ordinary
|
|
keys unless the modifyOtherKeys resource is set:
|
|
- prefix a key with the ESC character.
|
|
- shift the key from codes 0-127 to 128-255 by adding 128.
|
|
|
|
The table shows the result for a given character "x" with modifiers
|
|
according to the default translations with the resources set on or off.
|
|
This assumes altIsNotMeta is set:
|
|
|
|
-----------------------------------------------------------
|
|
key altSendsEscape metaSendsEscape result
|
|
-----------------------------------------------------------
|
|
x off off x
|
|
Meta-x off off shift
|
|
Alt-x off off shift
|
|
Alt+Meta-x off off shift
|
|
x ON off x
|
|
Meta-x ON off shift
|
|
Alt-x ON off ESC x
|
|
Alt+Meta-x ON off ESC shift
|
|
x off ON x
|
|
Meta-x off ON ESC x
|
|
Alt-x off ON shift
|
|
Alt+Meta-x off ON ESC shift
|
|
x ON ON x
|
|
Meta-x ON ON ESC x
|
|
Alt-x ON ON ESC x
|
|
Alt+Meta-x ON ON ESC x
|
|
-----------------------------------------------------------
|
|
|
|
|
|
PC-Style Function Keys
|
|
If xterm does minimal translation of the function keys, it usually does
|
|
this with a PC-style keyboard, so PC-style function keys result. Sun
|
|
keyboards are similar to PC keyboards. Both have cursor and scrolling
|
|
operations printed on the keypad, which duplicate the smaller cursor and
|
|
scrolling keypads.
|
|
|
|
X does not predefine NumLock (used for VT220 keyboards) or Alt (used as
|
|
an extension for the Sun/PC keyboards) as modifiers. These keys are
|
|
recognized as modifiers when enabled by the numLock resource, or by the
|
|
"DECSET 1 0 3 5 " control sequence.
|
|
|
|
The cursor keys transmit the following escape sequences depending on the
|
|
mode specified via the DECCKM escape sequence.
|
|
|
|
Key Normal Application
|
|
--------------------------------------
|
|
Cursor Up CSI A SS3 A
|
|
Cursor Down CSI B SS3 B
|
|
Cursor Right CSI C SS3 C
|
|
Cursor Left CSI D SS3 D
|
|
--------------------------------------
|
|
|
|
The home- and end-keys (unlike PageUp and other keys also on the 6-key
|
|
editing keypad) are considered "cursor keys" by xterm. Their mode is
|
|
also controlled by the DECCKM escape sequence:
|
|
|
|
Key Normal Application
|
|
----------------------------------
|
|
Home CSI H SS3 H
|
|
End CSI F SS3 F
|
|
----------------------------------
|
|
|
|
|
|
The application keypad transmits the following escape sequences depend-
|
|
ing on the mode specified via the DECPNM and DECPAM escape sequences.
|
|
Use the NumLock key to override the application mode.
|
|
|
|
Not all keys are present on the Sun/PC keypad (e.g., PF1, Tab), but are
|
|
supported by the program.
|
|
|
|
Key Numeric Application Terminfo Termcap
|
|
--------------------------------------------------------------
|
|
Space SP SS3 SP - -
|
|
Tab TAB SS3 I - -
|
|
Enter CR SS3 M kent @8
|
|
PF1 SS3 P SS3 P kf1 k1
|
|
PF2 SS3 Q SS3 Q kf2 k2
|
|
PF3 SS3 R SS3 R kf3 k3
|
|
PF4 SS3 S SS3 S kf4 k4
|
|
* (multiply) * SS3 j - -
|
|
+ (add) + SS3 k - -
|
|
, (comma) , SS3 l - -
|
|
- (minus) - SS3 m - -
|
|
. (Delete) . CSI 3 ~ - -
|
|
/ (divide) / SS3 o - -
|
|
0 (Insert) 0 CSI 2 ~ - -
|
|
1 (End) 1 SS3 F kc1 K4
|
|
2 (DownArrow) 2 CSI B - -
|
|
3 (PageDown) 3 CSI 6 ~ kc3 K5
|
|
4 (LeftArrow) 4 CSI D - -
|
|
5 (Begin) 5 CSI E kb2 K2
|
|
6 (RightArrow) 6 CSI C - -
|
|
7 (Home) 7 SS3 H ka1 K1
|
|
8 (UpArrow) 8 CSI A - -
|
|
9 (PageUp) 9 CSI 5 ~ ka3 K3
|
|
= (equal) = SS3 X - -
|
|
--------------------------------------------------------------
|
|
|
|
They also provide 12 function keys, as well as a few other special-pur-
|
|
pose keys:
|
|
|
|
Key Escape Sequence
|
|
---------------------------
|
|
F1 SS3 P
|
|
F2 SS3 Q
|
|
F3 SS3 R
|
|
F4 SS3 S
|
|
F5 CSI 1 5 ~
|
|
F6 CSI 1 7 ~
|
|
F7 CSI 1 8 ~
|
|
F8 CSI 1 9 ~
|
|
F9 CSI 2 0 ~
|
|
F10 CSI 2 1 ~
|
|
F11 CSI 2 3 ~
|
|
F12 CSI 2 4 ~
|
|
---------------------------
|
|
|
|
|
|
Older versions of xterm implement different escape sequences for F1
|
|
through F4. These can be activated by setting the oldXtermFKeys
|
|
resource. However, since they do not correspond to any hardware termi-
|
|
nal, they have been deprecated. (The DEC VT220 reserves F1 through F5
|
|
for local functions such as Setup).
|
|
|
|
Key Escape Sequence
|
|
---------------------------
|
|
F1 CSI 1 1 ~
|
|
F2 CSI 1 2 ~
|
|
F3 CSI 1 3 ~
|
|
F4 CSI 1 4 ~
|
|
---------------------------
|
|
|
|
In normal mode, i.e., a Sun/PC keyboard when the sunKeyboard resource is
|
|
false, xterm recognizes function key modifiers which are parameters
|
|
appended before the final character of the control sequence.
|
|
|
|
Code Modifiers
|
|
---------------------------------
|
|
2 Shift
|
|
3 Alt
|
|
4 Shift + Alt
|
|
5 Control
|
|
6 Shift + Control
|
|
7 Alt + Control
|
|
8 Shift + Alt + Control
|
|
---------------------------------
|
|
|
|
For example, shift-F5 would be sent as CSI 1 5 ; 2 ~
|
|
|
|
If the alwaysUseMods resource is set, the Meta modifier also is recog-
|
|
nized, making parameters 9 through 16.
|
|
|
|
VT220-Style Function Keys
|
|
However, xterm is most useful as a DEC VT102 or VT220 emulator. Set the
|
|
sunKeyboard resource to true to force a Sun/PC keyboard to act like a
|
|
VT220 keyboard.
|
|
|
|
The VT102/VT220 application keypad transmits unique escape sequences in
|
|
application mode, which are distinct from the cursor and scrolling key-
|
|
pad:
|
|
|
|
Key Numeric Application
|
|
--------------------------------------
|
|
Space SP SS3 SP
|
|
Tab TAB SS3 I
|
|
Enter CR SS3 M
|
|
PF1 SS3 P SS3 P
|
|
PF2 SS3 Q SS3 Q
|
|
PF3 SS3 R SS3 R
|
|
PF4 SS3 S SS3 S
|
|
* (multiply) * SS3 j
|
|
+ (add) + SS3 k
|
|
, (comma) , SS3 l
|
|
- (minus) - SS3 m
|
|
. (period) . SS3 n
|
|
/ (divide) / SS3 o
|
|
0 0 SS3 p
|
|
1 1 SS3 q
|
|
2 2 SS3 r
|
|
3 3 SS3 s
|
|
4 4 SS3 t
|
|
5 5 SS3 u
|
|
6 6 SS3 v
|
|
7 7 SS3 w
|
|
8 8 SS3 x
|
|
9 9 SS3 y
|
|
= (equal) = SS3 X
|
|
--------------------------------------
|
|
|
|
The VT220 provides a 6-key editing keypad, which is analogous to that on
|
|
the PC keyboard. It is not affected by DECCKM or DECPNM/DECPAM:
|
|
|
|
Key Normal Application
|
|
----------------------------------
|
|
Insert CSI 2 ~ CSI 2 ~
|
|
Delete CSI 3 ~ CSI 3 ~
|
|
Home CSI 1 ~ CSI 1 ~
|
|
End CSI 4 ~ CSI 4 ~
|
|
PageUp CSI 5 ~ CSI 5 ~
|
|
PageDown CSI 6 ~ CSI 6 ~
|
|
----------------------------------
|
|
|
|
The VT220 provides 8 additional function keys. With a Sun/PC keyboard,
|
|
access these keys by Control/F1 for F13, etc.
|
|
|
|
Key Escape Sequence
|
|
---------------------------
|
|
F13 CSI 2 5 ~
|
|
F14 CSI 2 6 ~
|
|
F15 CSI 2 8 ~
|
|
F16 CSI 2 9 ~
|
|
F17 CSI 3 1 ~
|
|
F18 CSI 3 2 ~
|
|
F19 CSI 3 3 ~
|
|
F20 CSI 3 4 ~
|
|
---------------------------
|
|
|
|
|
|
VT52-Style Function Keys
|
|
A VT52 does not have function keys, but it does have a numeric keypad
|
|
and cursor keys. They differ from the other emulations by the prefix.
|
|
Also, the cursor keys do not change:
|
|
|
|
Key Normal/Application
|
|
----------------------------------
|
|
Cursor Up ESC A
|
|
Cursor Down ESC B
|
|
Cursor Right ESC C
|
|
Cursor Left ESC D
|
|
----------------------------------
|
|
|
|
The keypad is similar:
|
|
|
|
Key Numeric Application
|
|
--------------------------------------
|
|
Space SP ESC ? SP
|
|
Tab TAB ESC ? I
|
|
Enter CR ESC ? M
|
|
PF1 ESC P ESC P
|
|
PF2 ESC Q ESC Q
|
|
PF3 ESC R ESC R
|
|
PF4 ESC S ESC S
|
|
* (multiply) * ESC ? j
|
|
+ (add) + ESC ? k
|
|
, (comma) , ESC ? l
|
|
- (minus) - ESC ? m
|
|
. (period) . ESC ? n
|
|
/ (divide) / ESC ? o
|
|
0 0 ESC ? p
|
|
1 1 ESC ? q
|
|
2 2 ESC ? r
|
|
3 3 ESC ? s
|
|
4 4 ESC ? t
|
|
5 5 ESC ? u
|
|
6 6 ESC ? v
|
|
7 7 ESC ? w
|
|
8 8 ESC ? x
|
|
9 9 ESC ? y
|
|
= (equal) = ESC ? X
|
|
--------------------------------------
|
|
|
|
|
|
Sun-Style Function Keys
|
|
The xterm program provides support for Sun keyboards more directly, by a
|
|
menu toggle that causes it to send Sun-style function key codes rather
|
|
than VT220. Note, however, that the sun and VT100 emulations are not
|
|
really compatible. For example, their wrap-margin behavior differs.
|
|
|
|
Only function keys are altered; keypad and cursor keys are the same.
|
|
The emulation responds identically. See the xterm-sun terminfo entry
|
|
for details.
|
|
|
|
HP-Style Function Keys
|
|
Similarly, xterm can be compiled to support HP keyboards. See the
|
|
xterm-hp terminfo entry for details.
|
|
|
|
The Alternate Screen Buffer
|
|
Xterm maintains two screen buffers. The normal screen buffer allows you
|
|
to scroll back to view saved lines of output up to the maximum set by
|
|
the saveLines resource. The alternate screen buffer is exactly as large
|
|
as the display, contains no additional saved lines. When the alternate
|
|
screen buffer is active, you cannot scroll back to view saved lines.
|
|
Xterm provides control sequences and menu entries for switching between
|
|
the two.
|
|
|
|
Most full-screen applications use terminfo or termcap to obtain strings
|
|
used to start/stop full-screen mode, i.e., smcup and rmcup for terminfo,
|
|
or the corresponding ti and te for termcap. The titeInhibit resource
|
|
removes the ti and te strings from the TERMCAP string which is set in
|
|
the environment for some platforms. That is not done when xterm is
|
|
built with terminfo libraries because terminfo does not provide the
|
|
whole text of the termcap data in one piece. It would not work for ter-
|
|
minfo anyway, since terminfo data is not passed in environment vari-
|
|
ables; setting an environment variable in this manner would have no
|
|
effect on the application's ability to switch between normal and alter-
|
|
nate screen buffers. Instead, the newer private mode controls (such as
|
|
1 0 4 9 ) for switching between normal and alternate screen buffers sim-
|
|
ply disable the switching. They add other features such as clearing the
|
|
display for the same reason: to make the details of switching indepen-
|
|
dent of the application that requests the switch.
|
|
|
|
Bracketed Paste Mode
|
|
When bracketed paste mode is set, pasted text is bracketed with control
|
|
sequences so that the program can differentiate pasted text from typed-
|
|
in text. When bracketed paste mode is set, the program will receive:
|
|
ESC [ 200 ~,
|
|
followed by the pasted text, followed by
|
|
ESC [ 201 ~.
|
|
|
|
Title Modes
|
|
The window- and icon-labels can be set or queried using control
|
|
sequences. As a VT220-emulator, xterm "should" limit the character
|
|
encoding for the corresponding strings to ISO-8859-1. Indeed, it used
|
|
to be the case (and was documented) that window titles had to be
|
|
ISO-8859-1. This is no longer the case. However, there are many appli-
|
|
cations which still assume that titles are set using ISO-8859-1. So
|
|
that is the default behavior.
|
|
|
|
If xterm is running with UTF-8 encoding, it is possible to use window-
|
|
and icon-labels encoded using UTF-8. That is because the underlying X
|
|
libraries (and many, but not all) window managers support this feature.
|
|
|
|
The utf8Title X resource setting tells xterm to disable a reconversion
|
|
of the title string back to ISO-8859-1, allowing the title strings to be
|
|
interpreted as UTF-8. The same feature can be enabled using the title
|
|
mode control sequence described in this summary.
|
|
|
|
Separate from the ability to set the titles, xterm provides the ability
|
|
to query the titles, returning them either in ISO-8859-1 or UTF-8. This
|
|
choice is available only while xterm is using UTF-8 encoding.
|
|
|
|
Finally, the characters sent to, or returned by a title control are less
|
|
constrained than the rest of the control sequences. To make them more
|
|
manageable (and constrained), for use in shell scripts, xterm has an
|
|
optional feature which decodes the string from hexadecimal (for setting
|
|
titles) or for encoding the title into hexadecimal when querying the
|
|
value.
|
|
|
|
Mouse Tracking
|
|
The VT widget can be set to send the mouse position and other informa-
|
|
tion on button presses. These modes are typically used by editors and
|
|
other full-screen applications that want to make use of the mouse.
|
|
|
|
There are six mutually exclusive modes. One is DEC Locator mode,
|
|
enabled by the DECELR CSI Ps ; Ps ' z control sequence, and is not
|
|
described here (control sequences are summarized above). The remaining
|
|
five modes are each enabled (or disabled) by a different parameter in
|
|
the "DECSET CSI ? Pm h " or "DECRST CSI ? Pm l " control sequence.
|
|
|
|
Manifest constants for the parameter values are defined in xcharmouse.h
|
|
as follows:
|
|
|
|
#define SET_X10_MOUSE 9
|
|
#define SET_VT200_MOUSE 1000
|
|
#define SET_VT200_HIGHLIGHT_MOUSE 1001
|
|
#define SET_BTN_EVENT_MOUSE 1002
|
|
#define SET_ANY_EVENT_MOUSE 1003
|
|
|
|
#define SET_FOCUS_EVENT_MOUSE 1004
|
|
|
|
#define SET_EXT_MODE_MOUSE 1005
|
|
|
|
The motion reporting modes are strictly xterm extensions, and are not
|
|
part of any standard, though they are analogous to the DEC VT200 DECELR
|
|
locator reports.
|
|
|
|
Parameters (such as pointer position and button number) for all mouse
|
|
tracking escape sequences generated by xterm encode numeric parameters
|
|
in a single character as value+32. For example, ! specifies the value
|
|
1. The upper left character position on the terminal is denoted as 1,1.
|
|
|
|
X10 compatibility mode sends an escape sequence only on button press,
|
|
encoding the location and the mouse button pressed. It is enabled by
|
|
specifying parameter 9 to DECSET. On button press, xterm sends CSI M
|
|
CbCxCy (6 characters).
|
|
o Cb is button-1.
|
|
o Cx and Cy are the x and y coordinates of the mouse when the button
|
|
was pressed.
|
|
|
|
Normal tracking mode sends an escape sequence on both button press and
|
|
release. Modifier key (shift, ctrl, meta) information is also sent. It
|
|
is enabled by specifying parameter 1000 to DECSET. On button press or
|
|
release, xterm sends CSI M CbCxCy.
|
|
o The low two bits of Cb encode button information: 0=MB1 pressed,
|
|
1=MB2 pressed, 2=MB3 pressed, 3=release.
|
|
o The next three bits encode the modifiers which were down when the
|
|
button was pressed and are added together: 4=Shift, 8=Meta, 16=Con-
|
|
trol. Note however that the shift and control bits are normally
|
|
unavailable because xterm uses the control modifier with mouse for
|
|
popup menus, and the shift modifier is used in the default transla-
|
|
tions for button events. The Meta modifier recognized by xterm is
|
|
the mod1 mask, and is not necessarily the "Meta" key (see xmodmap).
|
|
o Cx and Cy are the x and y coordinates of the mouse event, encoded as
|
|
in X10 mode.
|
|
|
|
Wheel mice may return buttons 4 and 5. Those buttons are represented by
|
|
the same event codes as buttons 1 and 2 respectively, except that 64 is
|
|
added to the event code. Release events for the wheel buttons are not
|
|
reported.
|
|
|
|
Mouse highlight tracking notifies a program of a button press, receives
|
|
a range of lines from the program, highlights the region covered by the
|
|
mouse within that range until button release, and then sends the program
|
|
the release coordinates. It is enabled by specifying parameter 1001 to
|
|
DECSET. Highlighting is performed only for button 1, though other but-
|
|
ton events can be received.
|
|
|
|
Warning: use of this mode requires a cooperating program or it will hang
|
|
xterm.
|
|
|
|
On button press, the same information as for normal tracking is gener-
|
|
ated; xterm then waits for the program to send mouse tracking informa-
|
|
tion. All X events are ignored until the proper escape sequence is
|
|
received from the pty: CSI Ps ; Ps ; Ps ; Ps ; Ps T . The parameters
|
|
are func, startx, starty, firstrow, and lastrow. func is non-zero to
|
|
initiate highlight tracking and zero to abort. startx and starty give
|
|
the starting x and y location for the highlighted region. The ending
|
|
location tracks the mouse, but will never be above row firstrow and will
|
|
always be above row lastrow. (The top of the screen is row 1.) When
|
|
the button is released, xterm reports the ending position one of two
|
|
ways:
|
|
o if the start and end coordinates are the same locations:
|
|
CSI t CxCy.
|
|
o otherwise:
|
|
CSI T CxCyCxCyCxCy.
|
|
The parameters are startx, starty, endx, endy, mousex, and mousey.
|
|
- startx, starty, endx, and endy give the starting and ending
|
|
character positions of the region.
|
|
- mousex and mousey give the location of the mouse at button up,
|
|
which may not be over a character.
|
|
|
|
Button-event tracking is essentially the same as normal tracking, but
|
|
xterm also reports button-motion events. Motion events are reported
|
|
only if the mouse pointer has moved to a different character cell. It
|
|
is enabled by specifying parameter 1002 to DECSET. On button press or
|
|
release, xterm sends the same codes used by normal tracking mode.
|
|
o On button-motion events, xterm adds 32 to the event code (the third
|
|
character, Cb).
|
|
o The other bits of the event code specify button and modifier keys as
|
|
in normal mode. For example, motion into cell x,y with button 1
|
|
down is reported as CSI M @ CxCy. ( @ = 32 + 0 (button 1) + 32
|
|
(motion indicator) ). Similarly, motion with button 3 down is
|
|
reported as CSI M B CxCy. ( B = 32 + 2 (button 3) + 32 (motion
|
|
indicator) ).
|
|
|
|
Any-event mode is the same as button-event mode, except that all motion
|
|
events are reported, even if no mouse button is down. It is enabled by
|
|
specifying 1003 to DECSET.
|
|
|
|
FocusIn/FocusOut can be combined with any of the mouse events since it
|
|
uses a different protocol. When set, it causes xterm to send CSI I
|
|
when the terminal gains focus, and CSI O when it loses focus.
|
|
|
|
Extended mouse mode enables UTF-8 encoding for Cx and Cy under all
|
|
tracking modes, expanding the maximum encodable position from 223 to
|
|
2015. For positions less than 95, the resulting output is identical
|
|
under both modes. Under extended mouse mode, positions greater than 95
|
|
generate "extra" bytes which will confuse applications which do not
|
|
treat their input as a UTF-8 stream. Likewise, Cb will be UTF-8
|
|
encoded, to reduce confusion with wheel mouse events.
|
|
|
|
NOTE: Under normal mouse mode, positions outside (160,94) result in byte
|
|
pairs which can be interpreted as a single UTF-8 character; applications
|
|
which do treat their input as UTF-8 will almost certainly be confused
|
|
unless extended mouse mode is active.
|
|
|
|
Tektronix 4014 Mode
|
|
Most of these sequences are standard Tektronix 4014 control sequences.
|
|
Graph mode supports the 12-bit addressing of the Tektronix 4014. The
|
|
major features missing are the write-through and defocused modes. This
|
|
document does not describe the commands used in the various Tektronix
|
|
plotting modes but does describe the commands to switch modes.
|
|
|
|
BEL Bell (Ctrl-G).
|
|
BS Backspace (Ctrl-H).
|
|
TAB Horizontal Tab (Ctrl-I).
|
|
LF Line Feed or New Line (Ctrl-J).
|
|
VT Cursor up (Ctrl-K).
|
|
FF Form Feed or New Page (Ctrl-L).
|
|
CR Carriage Return (Ctrl-M).
|
|
ESC ETX Switch to VT100 Mode (ESC Ctrl-C).
|
|
ESC ENQ Return Terminal Status (ESC Ctrl-E).
|
|
ESC FF PAGE (Clear Screen) (ESC Ctrl-L).
|
|
ESC SO Begin 4015 APL mode (ESC Ctrl-N). (This is ignored by
|
|
xterm).
|
|
ESC SI End 4015 APL mode (ESC Ctrl-O). (This is ignored by xterm).
|
|
ESC ETB COPY (Save Tektronix Codes to file COPYyyyy-mm-dd.hh:mm:ss).
|
|
ETB (end transmission block) is the same as Ctrl-W.
|
|
ESC CAN Bypass Condition (ESC Ctrl-X).
|
|
ESC SUB GIN mode (ESC Ctrl-Z).
|
|
ESC FS Special Point Plot Mode (ESC Ctrl-\).
|
|
ESC 8 Select Large Character Set.
|
|
ESC 9 Select #2 Character Set.
|
|
ESC : Select #3 Character Set.
|
|
ESC ; Select Small Character Set.
|
|
OSC Ps ; Pt BEL
|
|
Set Text Parameters of VT window.
|
|
Ps = 0 -> Change Icon Name and Window Title to Pt.
|
|
Ps = 1 -> Change Icon Name to Pt.
|
|
Ps = 2 -> Change Window Title to Pt.
|
|
Ps = 4 6 -> Change Log File to Pt. (This is normally dis-
|
|
abled by a compile-time option).
|
|
ESC ` Normal Z Axis and Normal (solid) Vectors.
|
|
ESC a Normal Z Axis and Dotted Line Vectors.
|
|
ESC b Normal Z Axis and Dot-Dashed Vectors.
|
|
ESC c Normal Z Axis and Short-Dashed Vectors.
|
|
ESC d Normal Z Axis and Long-Dashed Vectors.
|
|
ESC h Defocused Z Axis and Normal (solid) Vectors.
|
|
ESC i Defocused Z Axis and Dotted Line Vectors.
|
|
ESC j Defocused Z Axis and Dot-Dashed Vectors.
|
|
ESC k Defocused Z Axis and Short-Dashed Vectors.
|
|
ESC l Defocused Z Axis and Long-Dashed Vectors.
|
|
ESC p Write-Thru Mode and Normal (solid) Vectors.
|
|
ESC q Write-Thru Mode and Dotted Line Vectors.
|
|
ESC r Write-Thru Mode and Dot-Dashed Vectors.
|
|
ESC s Write-Thru Mode and Short-Dashed Vectors.
|
|
ESC t Write-Thru Mode and Long-Dashed Vectors.
|
|
FS Point Plot Mode (Ctrl-\).
|
|
GS Graph Mode (Ctrl-]).
|
|
RS Incremental Plot Mode (Ctrl-^).
|
|
US Alpha Mode (Ctrl-_).
|
|
|
|
VT52 Mode
|
|
Parameters for cursor movement are at the end of the ESC Y escape
|
|
sequence. Each ordinate is encoded in a single character as value+32.
|
|
For example, ! is 1. The screen coordinate system is 0-based.
|
|
|
|
ESC A Cursor up.
|
|
ESC B Cursor down.
|
|
ESC C Cursor right.
|
|
ESC D Cursor left.
|
|
ESC F Enter graphics mode.
|
|
ESC G Exit graphics mode.
|
|
ESC H Move the cursor to the home position.
|
|
ESC I Reverse line feed.
|
|
ESC J Erase from the cursor to the end of the screen.
|
|
ESC K Erase from the cursor to the end of the line.
|
|
ESC Y Ps Ps
|
|
Move the cursor to given row and column.
|
|
ESC Z Identify.
|
|
-> ESC / Z (``I am a VT52.'').
|
|
ESC = Enter alternate keypad mode.
|
|
ESC > Exit alternate keypad mode.
|
|
ESC < Exit VT52 mode (Enter VT100 mode).
|