7ef20d0cc6
- xorgcfg is gone - reduce the differences between README.i386 and README.amd64. ok jmc@, todd@, oga@, david@
59 lines
2.3 KiB
Plaintext
59 lines
2.3 KiB
Plaintext
Post-installation instructions for X.Org on OpenBSD/i386
|
|
--------------------------------------------------------
|
|
|
|
Conventions used in this document:
|
|
- somename(1) implies that "somename" is a program, and there is a
|
|
manual page available in section 1 of the manual pages for further
|
|
reading, viewed by typing "man 1 somename".
|
|
|
|
1. Make sure your system has support for X enabled:
|
|
|
|
You must have "option APERTURE" in your kernel configuration and
|
|
uncomment the line that says:
|
|
|
|
machdep.allowaperture=2
|
|
|
|
in /etc/sysctl.conf. See xf86(4) for more details about security
|
|
issues related to this. After changing this variable in sysctl.conf,
|
|
you will need to reboot for the change to take effect.
|
|
|
|
2. Find out about your hardware:
|
|
|
|
Find out what chipset is used by your video board. Write this
|
|
information down. The dmesg(8) command output is useful.
|
|
|
|
What kind of mouse do you have and which port is it connected to?
|
|
The two most common cases are a PS/2 style or USB mouse, for which
|
|
OpenBSD uses the wsmouse(4) protocol with the /dev/wsmouse device.
|
|
If you have a serial mouse, connected to /dev/tty00 (MS Windows
|
|
COM1: port) or /dev/tty01 (COM2: port) you probably want to try the
|
|
"auto" protocol first.
|
|
|
|
3. Create the configuration file for your server.
|
|
|
|
For many users of X.Org's servers, an xorg.conf file is not needed,
|
|
simply start X, and it will automatically detect and use your
|
|
hardware. If your hardware is not properly autodetected or supported
|
|
or not supported as you wish, you will have to create a configuration
|
|
file.
|
|
|
|
Run Xorg -configure as root and move the resulting xorg.conf.new
|
|
file to /etc/X11/xorg.conf. Edit it to adjust it for your hardware.
|
|
|
|
See also Xorg(1), xorg.conf(5).
|
|
|
|
4. Start either xdm(1) or startx(1).
|
|
|
|
a. Start xdm(1), the X display manager by activating the xdm_flags option
|
|
in /etc/rc.conf(8) or /etc/rc.conf.local(8).
|
|
|
|
b. Start startx(1) from a console shell. It is the X script that starts
|
|
the X server and a few X applications, including a window manager.
|
|
|
|
5. With X.Org XOrgVersion, you can use antialiased fonts in some applications.
|
|
visit http://www.openbsd.org/faq/truetype.html for more information.
|
|
|
|
problem_blurb
|
|
|
|
$OpenBSD: README.i386,v 1.2 2007/12/17 08:23:48 matthieu Exp $
|