xenocara/xserver/include/displaymode.h
matthieu e927c03e30 Update to xserver 1.18.3. Tested by shadchin@ and naddy@.
Note that indirect GLX is now disbled by default.
2016-05-29 12:02:34 +00:00

103 lines
4.0 KiB
C

#ifdef HAVE_DIX_CONFIG_H
#include <dix-config.h>
#endif
#ifndef _DISMODEPROC_H_
#define _DISMODEPROC_H_
#include "scrnintstr.h"
#define MAXCLOCKS 128
/* These are possible return values for xf86CheckMode() and ValidMode() */
typedef enum {
MODE_OK = 0, /* Mode OK */
MODE_HSYNC, /* hsync out of range */
MODE_VSYNC, /* vsync out of range */
MODE_H_ILLEGAL, /* mode has illegal horizontal timings */
MODE_V_ILLEGAL, /* mode has illegal horizontal timings */
MODE_BAD_WIDTH, /* requires an unsupported linepitch */
MODE_NOMODE, /* no mode with a matching name */
MODE_NO_INTERLACE, /* interlaced mode not supported */
MODE_NO_DBLESCAN, /* doublescan mode not supported */
MODE_NO_VSCAN, /* multiscan mode not supported */
MODE_MEM, /* insufficient video memory */
MODE_VIRTUAL_X, /* mode width too large for specified virtual size */
MODE_VIRTUAL_Y, /* mode height too large for specified virtual size */
MODE_MEM_VIRT, /* insufficient video memory given virtual size */
MODE_NOCLOCK, /* no fixed clock available */
MODE_CLOCK_HIGH, /* clock required is too high */
MODE_CLOCK_LOW, /* clock required is too low */
MODE_CLOCK_RANGE, /* clock/mode isn't in a ClockRange */
MODE_BAD_HVALUE, /* horizontal timing was out of range */
MODE_BAD_VVALUE, /* vertical timing was out of range */
MODE_BAD_VSCAN, /* VScan value out of range */
MODE_HSYNC_NARROW, /* horizontal sync too narrow */
MODE_HSYNC_WIDE, /* horizontal sync too wide */
MODE_HBLANK_NARROW, /* horizontal blanking too narrow */
MODE_HBLANK_WIDE, /* horizontal blanking too wide */
MODE_VSYNC_NARROW, /* vertical sync too narrow */
MODE_VSYNC_WIDE, /* vertical sync too wide */
MODE_VBLANK_NARROW, /* vertical blanking too narrow */
MODE_VBLANK_WIDE, /* vertical blanking too wide */
MODE_PANEL, /* exceeds panel dimensions */
MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */
MODE_ONE_WIDTH, /* only one width is supported */
MODE_ONE_HEIGHT, /* only one height is supported */
MODE_ONE_SIZE, /* only one resolution is supported */
MODE_NO_REDUCED, /* monitor doesn't accept reduced blanking */
MODE_BANDWIDTH, /* mode requires too much memory bandwidth */
MODE_BAD = -2, /* unspecified reason */
MODE_ERROR = -1 /* error condition */
} ModeStatus;
/* Video mode */
typedef struct _DisplayModeRec {
struct _DisplayModeRec *prev;
struct _DisplayModeRec *next;
const char *name; /* identifier for the mode */
ModeStatus status;
int type;
/* These are the values that the user sees/provides */
int Clock; /* pixel clock freq (kHz) */
int HDisplay; /* horizontal timing */
int HSyncStart;
int HSyncEnd;
int HTotal;
int HSkew;
int VDisplay; /* vertical timing */
int VSyncStart;
int VSyncEnd;
int VTotal;
int VScan;
int Flags;
/* These are the values the hardware uses */
int ClockIndex;
int SynthClock; /* Actual clock freq to
* be programmed (kHz) */
int CrtcHDisplay;
int CrtcHBlankStart;
int CrtcHSyncStart;
int CrtcHSyncEnd;
int CrtcHBlankEnd;
int CrtcHTotal;
int CrtcHSkew;
int CrtcVDisplay;
int CrtcVBlankStart;
int CrtcVSyncStart;
int CrtcVSyncEnd;
int CrtcVBlankEnd;
int CrtcVTotal;
Bool CrtcHAdjusted;
Bool CrtcVAdjusted;
int PrivSize;
INT32 *Private;
int PrivFlags;
float HSync, VRefresh;
} DisplayModeRec, *DisplayModePtr;
#endif