71 lines
2.5 KiB
Plaintext
71 lines
2.5 KiB
Plaintext
WARNING:
|
|
On exit XFree86 restores the old mode but it
|
|
does not disable the secondary card. As a result
|
|
the second card (which has some randonm CRTC timing)
|
|
may produce synch pulses which are wrong for your
|
|
monitor.
|
|
|
|
If your monitor does not tolerate bad timing I would
|
|
recommend that you don't try Multi-head yet, or at
|
|
least, turn it off *before* leaving X.
|
|
|
|
|
|
3.9Nl notice: There is a problem with releasing
|
|
of LBX colormap privates which may cause a seg.
|
|
fault when the server exits. I got a patch from
|
|
Mark Vojkovich which fixes it.
|
|
|
|
If you have a CL-GD5480 or CL-GD5446 ver. B you
|
|
should be able to try Multi-Head with that
|
|
card as a secondary. The primary card should not
|
|
have any special feature. Some MainBoards may
|
|
not do it right too. I tried it with a 5465 (AGP)
|
|
as a primary and 5446B (PCI) secondary on an
|
|
ABIT LX6 upgraded to the latest bios.
|
|
|
|
Version A of the 5446 cannot be pure MMIO (The driver
|
|
requires that it is the primary display adapter).
|
|
You can distinguish between the rel A and rel B by
|
|
running "scanpci -v". Version 1 does not report a
|
|
valid BASE1 address.
|
|
|
|
The bios upgrade lets me chose if the primary
|
|
display adapter is on PCI on AGP (I chose
|
|
the AGP card as primary). Warning - this setup
|
|
will *NOT* work with XFree86 3.3.2.
|
|
|
|
The only problem that I found so far is with
|
|
memory configuration initialization. My bios
|
|
does not initialize the secondary display adapter.
|
|
This results in a currupted display.
|
|
|
|
Here are the options:
|
|
1. warm booting from Windows 98 may work. I have
|
|
not tried that.
|
|
|
|
2. Take out the other card and leave the 5446
|
|
(or 5480) as the primary card. Start the server
|
|
and watch it's output. Look for lines like:
|
|
(--) CIRRUS(0): Memory Config reg 1 is 0x1B
|
|
(--) CIRRUS(0): Memory Config reg 2 is 0x21
|
|
Remember these values. Now edit XF86Config
|
|
and add to the proper device section the lines:
|
|
Option "MemCFG1" "0x1B"
|
|
Option "MemCFG2" "0x21"
|
|
These values are the contents of registers SR0F
|
|
and SR17. (notice: the 5480 driver does not use
|
|
and will not print MemCFG2).
|
|
|
|
Now you can reinstall the other card (which
|
|
must me set as the the primary display adaptor).
|
|
|
|
A note about configuring multi-head:
|
|
There should be a separate section for each
|
|
adapter (device), Monitor and Screen. A "ServerLayout"
|
|
section is optional (and recommended). To make it
|
|
easier for XFree86 to relate device sections to
|
|
actual cards, use a BusId line in each device
|
|
section. XFree86 3.9N works properly if the config
|
|
file is for Multi-head but it finds only one
|
|
display adapter.
|