268 lines
6.9 KiB
Plaintext
268 lines
6.9 KiB
Plaintext
Post-installation instructions for X.Org on OpenBSD/sparc64
|
|
-----------------------------------------------------------
|
|
|
|
Contents
|
|
--------
|
|
Single, unaccelerated display
|
|
Single, accelerated display
|
|
Dual, unaccelerated display
|
|
|
|
Single, unaccelerated display
|
|
-----------------------------
|
|
This setup is by far the easiest to configure and is supported on just
|
|
about every machine OpenBSD/sparc64 runs on (both PCI and SBus based
|
|
machines). A sample /etc/X11/xorg.conf is given at the end of this
|
|
section, but it may need to be customized to fit the machine. Mostly
|
|
these just entails configuring where mouse input comes from.
|
|
|
|
- For systems with serial mice on Zilog ports (zstty), the following
|
|
'ServerLayout' section should be used in place of the one provided:
|
|
|
|
Section "ServerLayout"
|
|
Identifier "wsfb"
|
|
Screen 0 "Screen0" 0 0
|
|
InputDevice "zsmouse0" "CorePointer"
|
|
InputDevice "Keyboard0" "CoreKeyboard"
|
|
EndSection
|
|
|
|
- For systems with serial mice on 'com' ports, the following
|
|
'ServerLayout' section should be used in place of the one provided:
|
|
|
|
Section "ServerLayout"
|
|
Identifier "wsfb"
|
|
Screen 0 "Screen0" 0 0
|
|
InputDevice "commouse0" "CorePointer"
|
|
InputDevice "Keyboard0" "CoreKeyboard"
|
|
EndSection
|
|
|
|
- For systems with USB mice or PS/2 mice, the following 'ServerLayout'
|
|
section should be used in place of the one provided:
|
|
|
|
Section "ServerLayout"
|
|
Identifier "wsfb"
|
|
Screen 0 "Screen0" 0 0
|
|
InputDevice "wsmouse0" "CorePointer"
|
|
InputDevice "Keyboard0" "CoreKeyboard"
|
|
EndSection
|
|
|
|
- For systems with both UPA and VGA framebuffers, the device parameter
|
|
in the "Device" section must match the wsdisplay device corresponding
|
|
to the console (/dev/ttyC0 for wsdisplay0, /dev/ttyD0 for wsdisplay1,
|
|
etc).
|
|
|
|
- For systems with UPA Creator/Creator3D/Elite3D framebuffers use
|
|
DefaultDepth 24
|
|
in the "Screen" section.
|
|
|
|
- What follows is a whole sample configuration file. Copy it to
|
|
/etc/X11/xorg.conf and customize it as described above.
|
|
|
|
-- Cut Here --
|
|
#
|
|
# Unaccelerated, single display configuration
|
|
#
|
|
Section "ServerLayout"
|
|
Identifier "wsfb"
|
|
Screen 0 "Screen0" 0 0
|
|
InputDevice "wsmouse0" "CorePointer"
|
|
InputDevice "Keyboard0" "CoreKeyboard"
|
|
EndSection
|
|
|
|
Section "Files"
|
|
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
|
|
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
|
|
FontPath "/usr/X11R6/lib/X11/fonts/OTF"
|
|
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
|
|
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
|
|
EndSection
|
|
|
|
# All Sun keyboards (USB Type 6, Serial Type 3/4/5/6)
|
|
Section "InputDevice"
|
|
Identifier "Keyboard0"
|
|
Driver "keyboard"
|
|
Option "Protocol" "wskbd"
|
|
Option "Device" "/dev/wskbd0"
|
|
Option "XkbRules" "xorg"
|
|
Option "XkbLayout" "us"
|
|
EndSection
|
|
|
|
# USB Mice
|
|
Section "InputDevice"
|
|
Identifier "wsmouse0"
|
|
Driver "mouse"
|
|
Option "Protocol" "wsmouse"
|
|
Option "Device" "/dev/wsmouse0"
|
|
EndSection
|
|
|
|
# Serial mice on zstty ports
|
|
Section "InputDevice"
|
|
Identifier "zsmouse0"
|
|
Driver "mouse"
|
|
Option "Protocol" "SunMouse"
|
|
Option "Device" "/dev/ttyc"
|
|
Option "Baudrate" "1200"
|
|
EndSection
|
|
|
|
# Serial mice on com ports
|
|
Section "InputDevice"
|
|
Identifier "commouse0"
|
|
Driver "mouse"
|
|
Option "Protocol" "SunMouse"
|
|
Option "Device" "/dev/tty00"
|
|
Option "Baudrate" "1200"
|
|
EndSection
|
|
|
|
# All monitors
|
|
Section "Monitor"
|
|
Identifier "Monitor"
|
|
VendorName "Unknown"
|
|
ModelName "Unknown"
|
|
# Adjust those to your monitor before using another device than wsfb
|
|
# or you can destroy it !!
|
|
HorizSync 31.5-60
|
|
VertRefresh 50-70
|
|
EndSection
|
|
|
|
# All framebuffers
|
|
Section "Device"
|
|
Identifier "Wsdisplay0"
|
|
Driver "wsfb"
|
|
Option "device" "/dev/ttyC0"
|
|
EndSection
|
|
|
|
# All framebuffers
|
|
Section "Screen"
|
|
Identifier "Screen0"
|
|
Device "Wsdisplay0"
|
|
Monitor "Monitor"
|
|
DefaultDepth 8
|
|
SubSection "Display"
|
|
Depth 8
|
|
EndSubSection
|
|
SubSection "Display"
|
|
Depth 16
|
|
EndSubSection
|
|
SubSection "Display"
|
|
Depth 24
|
|
EndSubSection
|
|
EndSection
|
|
#
|
|
# EOF
|
|
#
|
|
-- Cut Here --
|
|
|
|
Single, accelerated display
|
|
---------------------------
|
|
Accelerated access to the framebuffer is supported on machines with
|
|
PCI VGA or UPA Creator framebuffers.
|
|
To use a PCI VGA framebuffer, retrieve the PCI bus, device and function
|
|
of the video card, eg:
|
|
|
|
blade$ dmesg | grep vgafb
|
|
vgafb0 at pci0 dev 19 function 0 "ATI Rage XL" rev 0x27
|
|
wsdisplay0 at vgafb0: console (std, sun emulation), using wskbd0
|
|
|
|
The framebuffer is on bus 0, device 19, function 0. Now, using the
|
|
configuration in the first section as a guide, replace the "Device" section
|
|
with something like the following (replace 0:19:0 with the bus:dev:func
|
|
of the framebuffer):
|
|
|
|
Section "Device"
|
|
Identifier "Card0"
|
|
Driver "ati"
|
|
BusID "PCI:0:19:0"
|
|
Option "composite_sync" "True"
|
|
# Use the following option on Blade-100
|
|
# Option "reference_clock" "29.5MHz"
|
|
EndSection
|
|
|
|
For UPA Creator framebuffers, the device can be automatically detected if
|
|
you don't have an xorg.conf file. Otherwise the "Device" section would
|
|
be something like:
|
|
|
|
Section "Device"
|
|
Identifier "Card0"
|
|
Driver "sunffb"
|
|
EndSection
|
|
|
|
It is also important that you modify the Monitor section and change the
|
|
HorizSync and VertRefresh parameters with those of the monitor in use.
|
|
Finally, customization of the Screen section will allow switching of
|
|
resolutions and setting the default bit depth, e.g.:
|
|
|
|
Section "Screen"
|
|
Identifier "Screen0"
|
|
Device "Card0"
|
|
Monitor "Monitor"
|
|
DefaultDepth 24
|
|
SubSection "Display"
|
|
Depth 8
|
|
Modes "640x480" "800x600" "1024x768"
|
|
EndSubSection
|
|
SubSection "Display"
|
|
Depth 16
|
|
Modes "640x480" "800x600" "1024x768"
|
|
EndSubSection
|
|
SubSection "Display"
|
|
Depth 24
|
|
Modes "640x480" "800x600" "1024x768"
|
|
EndSubSection
|
|
EndSection
|
|
|
|
See xorg.conf(5) for more options.
|
|
|
|
Dual, unaccelerated display
|
|
---------------------------
|
|
Dual-headed displays are only supported on machines with SBus framebuffers.
|
|
Starting with the configuration in the first section, three additional
|
|
sections are added for the second framebuffer:
|
|
|
|
Section "Device"
|
|
Identifier "Wsdisplay1"
|
|
Driver "wsfb"
|
|
Option "device" "/dev/ttyD0"
|
|
EndSection
|
|
|
|
Section "Monitor"
|
|
Identifier "Monitor1"
|
|
VendorName "Unknown"
|
|
ModelName "Unknown"
|
|
# Adjust those to your monitor before using another device than wsfb
|
|
# or you can destroy it !!
|
|
HorizSync 31.5-60
|
|
VertRefresh 50-70
|
|
EndSection
|
|
|
|
Section "Screen"
|
|
Identifier "Screen1"
|
|
Device "Wsdisplay1"
|
|
Monitor "Monitor1"
|
|
DefaultDepth 8
|
|
SubSection "Display"
|
|
Depth 8
|
|
EndSubSection
|
|
SubSection "Display"
|
|
Depth 16
|
|
EndSubSection
|
|
SubSection "Display"
|
|
Depth 24
|
|
EndSubSection
|
|
EndSection
|
|
|
|
The ServerLayout section is also changed to include the second framebuffer
|
|
and its logical location relative to the first, e.g.:
|
|
|
|
Section "ServerLayout"
|
|
Identifier "wsfb"
|
|
Screen 0 "Screen0"
|
|
Screen 1 "Screen1" RightOf "Screen0"
|
|
InputDevice "zsmouse0" "CorePointer"
|
|
InputDevice "Keyboard0" "CoreKeyboard"
|
|
EndSection
|
|
|
|
See xorg.conf(5) for more options.
|
|
|
|
problem_blurb
|
|
|
|
$OpenBSD: README.sparc64,v 1.5 2008/08/31 07:30:43 matthieu Exp $
|