qbit/xenocara
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
646d14d2d3
xenocara/lib/mesa/Makefile.in
jsg 646d14d2d3 Revert to Mesa 13.0.6 again. 
Corruption has again been reported on Intel hardware running Xorg with
the modesetting driver (which uses OpenGL based acceleration instead of
SNA acceleration the intel driver defaults to).

Reported in various forms on Sandy Bridge (X220), Ivy Bridge (X230) and
Haswell (X240).  Confirmed to not occur with the intel driver but the
xserver was changed to default to the modesetting driver on >= gen4
hardware (except Ironlake).

One means of triggering this is to open a large pdf with xpdf on an
idle machine and highlight a section of the document.

There have been reports of gpu hangs on gen4 intel hardware
(T500 with GM45, X61 with 965GM) when starting Xorg as well.
2018-01-08 05:41:20 +00:00

1041 lines
33 KiB
Makefile
Raw Blame History

# Makefile.in generated by automake 1.12.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2012 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# Copyright © 2012 Intel Corporation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice (including the next
# paragraph) shall be included in all copies or substantial portions of the
# Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
# IN THE SOFTWARE.
VPATH = @srcdir@
am__make_dryrun = \
{ \
am__dry=no; \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
| grep '^AM OK$$' >/dev/null || am__dry=yes;; \
*) \
for am__flg in $$MAKEFLAGS; do \
case $$am__flg in \
*=*|--*) ;; \
*n*) am__dry=yes; break;; \
esac; \
done;; \
esac; \
test $$am__dry = yes; \
}
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = .
DIST_COMMON = $(am__configure_deps) $(noinst_HEADERS) \
$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(top_srcdir)/bin/ar-lib $(top_srcdir)/bin/compile \
$(top_srcdir)/bin/config.guess $(top_srcdir)/bin/config.sub \
$(top_srcdir)/bin/install-sh $(top_srcdir)/bin/ltmain.sh \
$(top_srcdir)/bin/missing $(top_srcdir)/configure \
$(top_srcdir)/src/egl/main/egl.pc.in \
$(top_srcdir)/src/gbm/main/gbm.pc.in \
$(top_srcdir)/src/mapi/es1api/glesv1_cm.pc.in \
$(top_srcdir)/src/mapi/es2api/glesv2.pc.in bin/ar-lib \
bin/compile bin/config.guess bin/config.sub bin/depcomp \
bin/install-sh bin/ltmain.sh bin/missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_gnu_make.m4 \
$(top_srcdir)/m4/ax_check_python_mako_module.m4 \
$(top_srcdir)/m4/ax_gcc_builtin.m4 \
$(top_srcdir)/m4/ax_gcc_func_attribute.m4 \
$(top_srcdir)/m4/ax_prog_bison.m4 \
$(top_srcdir)/m4/ax_prog_flex.m4 \
$(top_srcdir)/m4/ax_pthread.m4 $(top_srcdir)/m4/libtool.m4 \
$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
$(top_srcdir)/VERSION $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES = src/egl/main/egl.pc src/gbm/main/gbm.pc \
src/mapi/es1api/glesv1_cm.pc src/mapi/es2api/glesv2.pc
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
HEADERS = $(noinst_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
cscope distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
GZIP_ENV = --best
DIST_TARGETS = dist-xz dist-gzip
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMDGPU_CFLAGS = @AMDGPU_CFLAGS@
AMDGPU_LIBS = @AMDGPU_LIBS@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BSYMBOLIC = @BSYMBOLIC@
CC = @CC@
CCAS = @CCAS@
CCASDEPMODE = @CCASDEPMODE@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CLANG_RESOURCE_DIR = @CLANG_RESOURCE_DIR@
CLOCK_LIB = @CLOCK_LIB@
CLOVER_STD_OVERRIDE = @CLOVER_STD_OVERRIDE@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
D3D_DRIVER_INSTALL_DIR = @D3D_DRIVER_INSTALL_DIR@
DEFINES = @DEFINES@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DLOPEN_LIBS = @DLOPEN_LIBS@
DRI2PROTO_CFLAGS = @DRI2PROTO_CFLAGS@
DRI2PROTO_LIBS = @DRI2PROTO_LIBS@
DRI3PROTO_CFLAGS = @DRI3PROTO_CFLAGS@
DRI3PROTO_LIBS = @DRI3PROTO_LIBS@
DRIGL_CFLAGS = @DRIGL_CFLAGS@
DRIGL_LIBS = @DRIGL_LIBS@
DRI_DRIVER_INSTALL_DIR = @DRI_DRIVER_INSTALL_DIR@
DRI_DRIVER_SEARCH_DIR = @DRI_DRIVER_SEARCH_DIR@
DRI_LIB_DEPS = @DRI_LIB_DEPS@
DRI_PC_REQ_PRIV = @DRI_PC_REQ_PRIV@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGL_CFLAGS = @EGL_CFLAGS@
EGL_CLIENT_APIS = @EGL_CLIENT_APIS@
EGL_LIB_DEPS = @EGL_LIB_DEPS@
EGL_NATIVE_PLATFORM = @EGL_NATIVE_PLATFORM@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXPAT_CFLAGS = @EXPAT_CFLAGS@
EXPAT_LIBS = @EXPAT_LIBS@
FGREP = @FGREP@
FREEDRENO_CFLAGS = @FREEDRENO_CFLAGS@
FREEDRENO_LIBS = @FREEDRENO_LIBS@
GALLIUM_PIPE_LOADER_DEFINES = @GALLIUM_PIPE_LOADER_DEFINES@
GBM_PC_LIB_PRIV = @GBM_PC_LIB_PRIV@
GBM_PC_REQ_PRIV = @GBM_PC_REQ_PRIV@
GC_SECTIONS = @GC_SECTIONS@
GLESv1_CM_LIB_DEPS = @GLESv1_CM_LIB_DEPS@
GLESv1_CM_PC_LIB_PRIV = @GLESv1_CM_PC_LIB_PRIV@
GLESv2_LIB_DEPS = @GLESv2_LIB_DEPS@
GLESv2_PC_LIB_PRIV = @GLESv2_PC_LIB_PRIV@
GLPROTO_CFLAGS = @GLPROTO_CFLAGS@
GLPROTO_LIBS = @GLPROTO_LIBS@
GLVND_CFLAGS = @GLVND_CFLAGS@
GLVND_LIBS = @GLVND_LIBS@
GLX_TLS = @GLX_TLS@
GL_LIB = @GL_LIB@
GL_LIB_DEPS = @GL_LIB_DEPS@
GL_PC_CFLAGS = @GL_PC_CFLAGS@
GL_PC_LIB_PRIV = @GL_PC_LIB_PRIV@
GL_PC_REQ_PRIV = @GL_PC_REQ_PRIV@
GREP = @GREP@
HAVE_XF86VIDMODE = @HAVE_XF86VIDMODE@
INDENT = @INDENT@
INDENT_FLAGS = @INDENT_FLAGS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTEL_CFLAGS = @INTEL_CFLAGS@
INTEL_LIBS = @INTEL_LIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LD_NO_UNDEFINED = @LD_NO_UNDEFINED@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBCLC_INCLUDEDIR = @LIBCLC_INCLUDEDIR@
LIBCLC_LIBEXECDIR = @LIBCLC_LIBEXECDIR@
LIBDRM_CFLAGS = @LIBDRM_CFLAGS@
LIBDRM_LIBS = @LIBDRM_LIBS@
LIBELF_CFLAGS = @LIBELF_CFLAGS@
LIBELF_LIBS = @LIBELF_LIBS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSENSORS_LDFLAGS = @LIBSENSORS_LDFLAGS@
LIBSHA1_CFLAGS = @LIBSHA1_CFLAGS@
LIBSHA1_LIBS = @LIBSHA1_LIBS@
LIBTOOL = @LIBTOOL@
LIB_DIR = @LIB_DIR@
LIB_EXT = @LIB_EXT@
LIPO = @LIPO@
LLVM_BINDIR = @LLVM_BINDIR@
LLVM_CFLAGS = @LLVM_CFLAGS@
LLVM_CONFIG = @LLVM_CONFIG@
LLVM_CPPFLAGS = @LLVM_CPPFLAGS@
LLVM_CXXFLAGS = @LLVM_CXXFLAGS@
LLVM_INCLUDEDIR = @LLVM_INCLUDEDIR@
LLVM_LDFLAGS = @LLVM_LDFLAGS@
LLVM_LIBDIR = @LLVM_LIBDIR@
LLVM_LIBS = @LLVM_LIBS@
LLVM_VERSION = @LLVM_VERSION@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MESA_LLVM = @MESA_LLVM@
MKDIR_P = @MKDIR_P@
MSVC2013_COMPAT_CFLAGS = @MSVC2013_COMPAT_CFLAGS@
MSVC2013_COMPAT_CXXFLAGS = @MSVC2013_COMPAT_CXXFLAGS@
NINE_MAJOR = @NINE_MAJOR@
NINE_MINOR = @NINE_MINOR@
NINE_TINY = @NINE_TINY@
NINE_VERSION = @NINE_VERSION@
NM = @NM@
NMEDIT = @NMEDIT@
NOUVEAU_CFLAGS = @NOUVEAU_CFLAGS@
NOUVEAU_LIBS = @NOUVEAU_LIBS@
NVVIEUX_CFLAGS = @NVVIEUX_CFLAGS@
NVVIEUX_LIBS = @NVVIEUX_LIBS@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OMX_CFLAGS = @OMX_CFLAGS@
OMX_LIBS = @OMX_LIBS@
OMX_LIB_INSTALL_DIR = @OMX_LIB_INSTALL_DIR@
OPENCL_LIBNAME = @OPENCL_LIBNAME@
OPENCL_VERSION = @OPENCL_VERSION@
OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
OPENSSL_LIBS = @OPENSSL_LIBS@
OSMESA_LIB = @OSMESA_LIB@
OSMESA_LIB_DEPS = @OSMESA_LIB_DEPS@
OSMESA_PC_LIB_PRIV = @OSMESA_PC_LIB_PRIV@
OSMESA_PC_REQ = @OSMESA_PC_REQ@
OSMESA_VERSION = @OSMESA_VERSION@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
POSIX_SHELL = @POSIX_SHELL@
PRESENTPROTO_CFLAGS = @PRESENTPROTO_CFLAGS@
PRESENTPROTO_LIBS = @PRESENTPROTO_LIBS@
PTHREADSTUBS_CFLAGS = @PTHREADSTUBS_CFLAGS@
PTHREADSTUBS_LIBS = @PTHREADSTUBS_LIBS@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
PWR8_CFLAGS = @PWR8_CFLAGS@
PYTHON2 = @PYTHON2@
RADEON_CFLAGS = @RADEON_CFLAGS@
RADEON_LIBS = @RADEON_LIBS@
RANLIB = @RANLIB@
RM = @RM@
SED = @SED@
SELINUX_CFLAGS = @SELINUX_CFLAGS@
SELINUX_LIBS = @SELINUX_LIBS@
SET_MAKE = @SET_MAKE@
SHA1_CFLAGS = @SHA1_CFLAGS@
SHA1_LIBS = @SHA1_LIBS@
SHELL = @SHELL@
SIMPENROSE_CFLAGS = @SIMPENROSE_CFLAGS@
SIMPENROSE_LIBS = @SIMPENROSE_LIBS@
SSE41_CFLAGS = @SSE41_CFLAGS@
STRIP = @STRIP@
SWR_AVX2_CXXFLAGS = @SWR_AVX2_CXXFLAGS@
SWR_AVX_CXXFLAGS = @SWR_AVX_CXXFLAGS@
SWR_CXX11_CXXFLAGS = @SWR_CXX11_CXXFLAGS@
TIMESTAMP_CMD = @TIMESTAMP_CMD@
VALGRIND_CFLAGS = @VALGRIND_CFLAGS@
VALGRIND_LIBS = @VALGRIND_LIBS@
VA_CFLAGS = @VA_CFLAGS@
VA_LIBS = @VA_LIBS@
VA_LIB_INSTALL_DIR = @VA_LIB_INSTALL_DIR@
VA_MAJOR = @VA_MAJOR@
VA_MINOR = @VA_MINOR@
VC4_CFLAGS = @VC4_CFLAGS@
VC4_LIBS = @VC4_LIBS@
VDPAU_CFLAGS = @VDPAU_CFLAGS@
VDPAU_LIBS = @VDPAU_LIBS@
VDPAU_LIB_INSTALL_DIR = @VDPAU_LIB_INSTALL_DIR@
VDPAU_MAJOR = @VDPAU_MAJOR@
VDPAU_MINOR = @VDPAU_MINOR@
VERSION = @VERSION@
VG_LIB_DEPS = @VG_LIB_DEPS@
VISIBILITY_CFLAGS = @VISIBILITY_CFLAGS@
VISIBILITY_CXXFLAGS = @VISIBILITY_CXXFLAGS@
VL_CFLAGS = @VL_CFLAGS@
VL_LIBS = @VL_LIBS@
VULKAN_ICD_INSTALL_DIR = @VULKAN_ICD_INSTALL_DIR@
WAYLAND_CFLAGS = @WAYLAND_CFLAGS@
WAYLAND_LIBS = @WAYLAND_LIBS@
WAYLAND_SCANNER = @WAYLAND_SCANNER@
WAYLAND_SCANNER_CFLAGS = @WAYLAND_SCANNER_CFLAGS@
WAYLAND_SCANNER_LIBS = @WAYLAND_SCANNER_LIBS@
X11_INCLUDES = @X11_INCLUDES@
XA_MAJOR = @XA_MAJOR@
XA_MINOR = @XA_MINOR@
XA_TINY = @XA_TINY@
XA_VERSION = @XA_VERSION@
XCB_DRI2_CFLAGS = @XCB_DRI2_CFLAGS@
XCB_DRI2_LIBS = @XCB_DRI2_LIBS@
XCB_DRI3_CFLAGS = @XCB_DRI3_CFLAGS@
XCB_DRI3_LIBS = @XCB_DRI3_LIBS@
XF86VIDMODE_CFLAGS = @XF86VIDMODE_CFLAGS@
XF86VIDMODE_LIBS = @XF86VIDMODE_LIBS@
XLIBGL_CFLAGS = @XLIBGL_CFLAGS@
XLIBGL_LIBS = @XLIBGL_LIBS@
XVMC_CFLAGS = @XVMC_CFLAGS@
XVMC_LIBS = @XVMC_LIBS@
XVMC_LIB_INSTALL_DIR = @XVMC_LIB_INSTALL_DIR@
XVMC_MAJOR = @XVMC_MAJOR@
XVMC_MINOR = @XVMC_MINOR@
XXD = @XXD@
YACC = @YACC@
YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
acv_mako_found = @acv_mako_found@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
ax_pthread_config = @ax_pthread_config@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
ifGNUmake = @ifGNUmake@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = src
AM_DISTCHECK_CONFIGURE_FLAGS = \
--enable-dri \
--enable-dri3 \
--enable-egl \
--enable-gallium-tests \
--enable-gallium-osmesa \
--enable-gallium-llvm \
--enable-gbm \
--enable-gles1 \
--enable-gles2 \
--enable-glx \
--enable-glx-tls \
--enable-nine \
--enable-opencl \
--enable-opengl \
--enable-va \
--enable-vdpau \
--enable-xa \
--enable-xvmc \
--enable-llvm-shared-libs \
--with-egl-platforms=x11,wayland,drm,surfaceless \
--with-dri-drivers=i915,i965,nouveau,radeon,r200,swrast \
--with-gallium-drivers=i915,ilo,nouveau,r300,r600,radeonsi,freedreno,svga,swrast,vc4,virgl,swr \
--with-vulkan-drivers=intel,radeon
ACLOCAL_AMFLAGS = -I m4
EXTRA_DIST = \
autogen.sh \
common.py \
docs \
doxygen \
scons \
SConstruct
noinst_HEADERS = \
include/c99_alloca.h \
include/c99_compat.h \
include/c99_math.h \
include/c11 \
include/D3D9 \
include/GL/wglext.h \
include/HaikuGL \
include/no_extern_c.h \
include/pci_ids
all: all-recursive
.SUFFIXES:
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
src/egl/main/egl.pc: $(top_builddir)/config.status $(top_srcdir)/src/egl/main/egl.pc.in
cd $(top_builddir) && $(SHELL) ./config.status $@
src/gbm/main/gbm.pc: $(top_builddir)/config.status $(top_srcdir)/src/gbm/main/gbm.pc.in
cd $(top_builddir) && $(SHELL) ./config.status $@
src/mapi/es1api/glesv1_cm.pc: $(top_builddir)/config.status $(top_srcdir)/src/mapi/es1api/glesv1_cm.pc.in
cd $(top_builddir) && $(SHELL) ./config.status $@
src/mapi/es2api/glesv2.pc: $(top_builddir)/config.status $(top_srcdir)/src/mapi/es2api/glesv2.pc.in
cd $(top_builddir) && $(SHELL) ./config.status $@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
cscopelist-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist-recursive cscopelist
cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
list='$(SOURCES) $(HEADERS) $(LISP)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(HEADERS)
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
cscopelist-recursive ctags-recursive install-am install-strip \
tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am--refresh check check-am clean clean-cscope \
clean-generic clean-libtool cscope cscopelist \
cscopelist-recursive ctags ctags-recursive dist dist-all \
dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar dist-tarZ \
dist-xz dist-zip distcheck distclean distclean-generic \
distclean-libtool distclean-tags distcleancheck distdir \
distuninstallcheck dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-info install-info-am install-man \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
ps ps-am tags tags-recursive uninstall uninstall-am
# We list some directories in EXTRA_DIST, but don't actually want to include
# the .gitignore files in the tarball.
dist-hook:
find $(distdir) -name .gitignore -exec $(RM) {} +
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Reference in New Issue View Git Blame Copy Permalink