88 lines
4.2 KiB
Plaintext
88 lines
4.2 KiB
Plaintext
|
|
Using a Borland compiler product
|
|
|
|
The files in this directory support using both the free Borland command-line
|
|
compiler tools and the Borland C++ Builder IDE. The project files have been
|
|
tested with both versions 5 and 6 of the C++ Builder product.
|
|
|
|
Using the free BCC32 command line compiler
|
|
|
|
After downloading and installing the free C++ Builder commandline version,
|
|
perform the following steps (assuming it was installed under C:\Borland\BCC55):
|
|
|
|
1) Add "C:\Borland\BCC55\BIN" to your path
|
|
2) Set the environment variable BCB to "C:\Borland\BCC55".
|
|
3) edit makefile.mak: enable or comment out the appropriate commands under
|
|
clean & distclean, depending on whether your OS can use deltree /y or
|
|
del /s/f/q.
|
|
|
|
After that, you should simply cd to the bcb5 directory in your Expat directory
|
|
tree (same structure as CVS) and run "make all" or just "make".
|
|
|
|
Naming
|
|
|
|
The libraries have the base name "libexpat" followed optionally by an "s"
|
|
(static) or a "w" (unicode version), then an underscore and optionally
|
|
"mt" (multi-threaded) and "d" (dynamic RTL).
|
|
|
|
To change the name of the library a project file produces, edit the project
|
|
option source (see step 1 under Unicode below) and change the name contained in
|
|
the PROJECT tag. In a make file, change the value assigned to the PROJECT
|
|
variable. Also, the LIBRARY entry in the .def file has to be changed to
|
|
correspond to the new executable name.
|
|
|
|
|
|
Unicode Considerations
|
|
|
|
There are no facilities in the BCB 5 GUI to create a unicode-enabled
|
|
application. Fortunately, it is not hard to do by hand.
|
|
|
|
1. The startup .obj system file must be changed to the unicode version.
|
|
Go to Project|Edit Option Source, and scroll down to the ALLOBJ tag. Change
|
|
c0x32.obj to c0x32w.obj. Editing this file can be quirky, but usually the
|
|
following kludge will make the change stick. Close and save the file
|
|
(CTRL-F4) then open the options dialog (CTRL-Shift-F11), then click OK on
|
|
the dialog immediately without changing anything in it. If this doesn't work,
|
|
you will have to close the project completely and edit the .bpr file by hand.
|
|
|
|
If you are using a make file, just change the startup .obj file assigned
|
|
to the ALLOBJ variable.
|
|
|
|
2. Add the macro define XML_UNICODE_WCHAR_T. In the GUI that goes in the options
|
|
dialog, Directories/Conditionals tab, in the Conditional define box. In a
|
|
make file, put it in the USERDEFINES variable.
|
|
|
|
3. Of course, your code has to be written for unicode. As a start, the "main"
|
|
function is called "wmain". The tchar macros are an interesting way to
|
|
write code that can easily switch between unicode and utf-8. If these macros
|
|
are used, then simply adding the conditional define _UNICODE as well as
|
|
XML_UNICODE_WCHAR_T will bring in the unicode versions of the tchar macros.
|
|
Otherwise the utf-8 versions are used. xmlwf uses its own versions of the
|
|
tchar macros which are switched on and off by the XML_UNICODE macro, which
|
|
itself is set by the XML_UNICODE_WCHAR_T define.
|
|
|
|
Threading
|
|
|
|
The libexpat libraries are all built to link with the multi-threaded dynamic RTL's.
|
|
That means they require CC32xxMT.DLL present on the installation target.
|
|
To create single-threaded libs, do the following:
|
|
|
|
1. The compiler option for multi-threading must be turned off. Following the
|
|
instructions above to edit the option source, remove the -tWM option from
|
|
the CFLAG1 tag. In a make file, remove it from the CFLAG1 variable.
|
|
|
|
2. The single threaded RTL must be called. change the RTL in the ALLLIB tag or
|
|
variable (GUI or makefile repectively) to the version without the "mt" in the
|
|
name. For example, change cw32mti.lib to cw32i.lib.
|
|
|
|
Static RTL's
|
|
|
|
To build the libs with static RTL's do the following,
|
|
|
|
1. For the static expatlibs, in the Tlib tab on the options dialog, uncheck the
|
|
"Use dynamic RTL" box. For the dynamic expatlibs, in the Linker tab on the
|
|
options dialog, uncheck "Use dynamic RTL". If you are using a make file,
|
|
remove the _RTLDLL assignment to the SYSDEFINES variable, and change the RTL
|
|
to the version without an "i" in the ALLLIB variable. For example,
|
|
cw32mti.lib would become cw32mt.lib.
|